| 99.99% Conductive Shining Flake Silver Powder | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | 99.99% Conductive Shining Flake Silver Powders are different silver powder products are chosen according to different use conditions. Low apparent density flake silver powders is the main raw material in production of conductive coating, membrane switch, ...展开 99.99% Conductive Shining Flake Silver Powders are different silver powder products are chosen according to different use conditions. Low apparent density flake silver powders is the main raw material in production of conductive coating, membrane switch, conductive inks, conductive rubber, conductive plastic, conductive ceramics.Low apparent density flake silver powder is mainly used in the low temperature electronic paste, conductive inks, conductive coatings, electromagnetic shielding coatings. the coating configurated by flake silver powder, whose liquidity and resistance to settlement is good, the coating area is large. 收起 | |
| 99.99% Conductive Silver Powder (Spherical) | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | 99.99% Conductive Silver Powder (Spherical) are widely used in electronic pastes, electronic products, electrical conductivity, electromagnetic shielding, anti-bacterial, and anti-virus applications. | |
| Acetone | TOP Solvent Company Limited | Acetone, also known as 2-propanone or dimethyl ketone (DMK), is a colorless, low boiling, easy pouring liquid with a distinguishing odor. It is miscible in all proportions with water, alcohols, many hydrocarbons and other organic liquids. It has solvent p...展开 Acetone, also known as 2-propanone or dimethyl ketone (DMK), is a colorless, low boiling, easy pouring liquid with a distinguishing odor. It is miscible in all proportions with water, alcohols, many hydrocarbons and other organic liquids. It has solvent properties for vegetable and animal fats, cellulose, natural and synthetic resins and many other organic substances. The primary use for this product is in printing inks, adhesives, paints and coatings. 收起 | |
| Acetylated Distarch Ddipate | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Acetylated Distarch Ddipate has a certain ability of anti-acid and anti-alkali, anti-cutting ability, is of good viscosity. It is used it as thickening agent, premium quality stabiliser in wallpaper adhesive. | |
| Acetylated Distarch Phosphate | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Acetylated Distarch Phosphate is a fine white to off white powder with characteristic starch taste and odor. Compared with the original starch, the solubility, swelling power and transparency were significantly increased, the aging tendency was significan...展开 Acetylated Distarch Phosphate is a fine white to off white powder with characteristic starch taste and odor. Compared with the original starch, the solubility, swelling power and transparency were significantly increased, the aging tendency was significantly decreased, and the freezing stability was improved. This product is heat-resistant and acid-resistant. It is used it as thickening agent in wallpaper adhesive. 收起 | |
| Black Manganese NB-2 | Changzhou Huazhu Pigment Co., Ltd. | Black Manganese NB-2 is a black powdered, inorganic metal oxide pigment exhibiting high light fastness and good weather resistance. It has a heat resistance rating of 800° C (1472° F) making it suitable for use in high-temperature printing inks and cerami...展开 Black Manganese NB-2 is a black powdered, inorganic metal oxide pigment exhibiting high light fastness and good weather resistance. It has a heat resistance rating of 800° C (1472° F) making it suitable for use in high-temperature printing inks and ceramic vitreous enamel coatings. 收起 | |
| Butyl Glycol Ether (BGE) | TOP Solvent Company Limited | Butyl Glycol Ether (BGE) is a colorless, slight smelling liquid with a high boiling point. This product has small hygroscopic properties and is miscible with water at room temperature. This liquid solution is also miscible with several different oxygenate...展开 Butyl Glycol Ether (BGE) is a colorless, slight smelling liquid with a high boiling point. This product has small hygroscopic properties and is miscible with water at room temperature. This liquid solution is also miscible with several different oxygenated solvents, as well as with aliphatic and aromatic hydrocarbons and oils. It is solvent for many natural and synthetic resins, nitrocellulose and ethyl cellulose. Butyl Glycol Either (BGE) is primarily used as a solvent in printing inks, paints and coatings. 收起 | |
| Cardanol | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Cardanol is made from national cashew nut shell oil, in a high vacuum distillation and solvent extraction processes to obtain industrial cardanol, it can substitute or partial substitute for the production of high performance phenolic resin, epoxy curing ...展开 Cardanol is made from national cashew nut shell oil, in a high vacuum distillation and solvent extraction processes to obtain industrial cardanol, it can substitute or partial substitute for the production of high performance phenolic resin, epoxy curing agents, surfactants, adhesives, paints, and other products used in the manufacture of friction materials epoxy curing agent, liquid phenolic resin, liquid or powdered thermosetting phenolic resin. 收起 | |
| Cobalt Blue PB28 | Changzhou Huazhu Pigment Co., Ltd. | Cobalt Blue PB28 is a black powdered, inorganic metal oxide pigment exhibiting high light fastness and good weather resistance. It has a heat resistance rating of 800° C (1472° F) making it suitable for use in high-temperature printing inks and ceramic vi...展开 Cobalt Blue PB28 is a black powdered, inorganic metal oxide pigment exhibiting high light fastness and good weather resistance. It has a heat resistance rating of 800° C (1472° F) making it suitable for use in high-temperature printing inks and ceramic vitreous enamel coatings. 收起 | |
| Cobalt Blue PB36 | Changzhou Huazhu Pigment Co., Ltd. | Cobalt Blue PB36 is a black powdered, inorganic metal oxide pigment exhibiting high light fastness and good weather resistance. It has a heat resistance rating of 800° C (1472° F) making it suitable for use in high-temperature printing inks and ceramic vi...展开 Cobalt Blue PB36 is a black powdered, inorganic metal oxide pigment exhibiting high light fastness and good weather resistance. It has a heat resistance rating of 800° C (1472° F) making it suitable for use in high-temperature printing inks and ceramic vitreous enamel coatings. 收起 | |
| Copper Chrome Black NB-1 | Changzhou Huazhu Pigment Co., Ltd. | Copper Chrome Black NB-1 is a black powdered, inorganic metal oxide pigment exhibiting high light fastness and good weather resistance. It has a heat resistance rating of 800° C (1472° F) making it suitable for use in high-temperature printing inks and ce...展开 Copper Chrome Black NB-1 is a black powdered, inorganic metal oxide pigment exhibiting high light fastness and good weather resistance. It has a heat resistance rating of 800° C (1472° F) making it suitable for use in high-temperature printing inks and ceramic vitreous enamel coatings. 收起 | |
| Crystal Blue HE-765 | Changzhou Huazhu Pigment Co., Ltd. | Crystal Blue HE-765 is a non-toxic, odorless, flake powder pigment which is acid and alkali resistant. It has a particle size range of 25-250 microns and is reflective blue, with a transmission color of orange. It can be used for vehicle, architectural, p...展开 Crystal Blue HE-765 is a non-toxic, odorless, flake powder pigment which is acid and alkali resistant. It has a particle size range of 25-250 microns and is reflective blue, with a transmission color of orange. It can be used for vehicle, architectural, powder and other coatings and paints. It is also suitable for silk screen, intaglio, offset and other printing inks. 收起 | |
| Crystal Blue HZ-745 | Changzhou Huazhu Pigment Co., Ltd. | Crystal Blue HZ-745 is a non-toxic, odorless, flake powder pigment which is acid and alkali resistant. It has a particle size range of 20-100 microns and is reflective blue, with a transmission color of orange. It can be used for vehicle, architectural, p...展开 Crystal Blue HZ-745 is a non-toxic, odorless, flake powder pigment which is acid and alkali resistant. It has a particle size range of 20-100 microns and is reflective blue, with a transmission color of orange. It can be used for vehicle, architectural, powder and other coatings and paints. It is also suitable for silk screen, intaglio, offset and other printing inks. 收起 | |
| Crystal Blue HZ-785 | Changzhou Huazhu Pigment Co., Ltd. | Crystal Blue HZ-785 is a non-toxic, odorless, flake powder pigment which is acid and alkali resistant. It has a particle size range of 10-400 microns and is reflective blue, with a transmission color of orange. It can be used for vehicle, architectural, p...展开 Crystal Blue HZ-785 is a non-toxic, odorless, flake powder pigment which is acid and alkali resistant. It has a particle size range of 10-400 microns and is reflective blue, with a transmission color of orange. It can be used for vehicle, architectural, powder and other coatings and paints. It is also suitable for silk screen, intaglio, offset and other printing inks. 收起 | |
| Crystal Gold HZ-741 | Changzhou Huazhu Pigment Co., Ltd. | Crystal Gold HZ-741 is a non-toxic, odorless, flake powder pigment which is acid and alkali resistant. It has a particle size range of 20-100 microns and is reflective gold, with a transmission color of pure blue. It can be used for vehicle, architectural...展开 Crystal Gold HZ-741 is a non-toxic, odorless, flake powder pigment which is acid and alkali resistant. It has a particle size range of 20-100 microns and is reflective gold, with a transmission color of pure blue. It can be used for vehicle, architectural, powder and other coatings and paints. It is also suitable for silk screen, intaglio, offset and other printing inks. 收起 | |
| Crystal Gold HZ-781 | Changzhou Huazhu Pigment Co., Ltd. | Crystal Gold HZ-781 is a non-toxic, odorless, flake powder pigment which is acid and alkali resistant. It has a particle size range of 10-400 microns and is reflective gold, with a transmission color of pure blue. It can be used for vehicle, architectural...展开 Crystal Gold HZ-781 is a non-toxic, odorless, flake powder pigment which is acid and alkali resistant. It has a particle size range of 10-400 microns and is reflective gold, with a transmission color of pure blue. It can be used for vehicle, architectural, powder and other coatings and paints. It is also suitable for silk screen, intaglio, offset and other printing inks. 收起 | |
| Crystal Green HZ-746 | Changzhou Huazhu Pigment Co., Ltd. | Crystal Green HZ-746 is a non-toxic, odorless, flake powder pigment which is acid and alkali resistant. It has a particle size range of 20-100 microns and is reflective green, with a transmission color of rose pink. It can be used for vehicle, architectur...展开 Crystal Green HZ-746 is a non-toxic, odorless, flake powder pigment which is acid and alkali resistant. It has a particle size range of 20-100 microns and is reflective green, with a transmission color of rose pink. It can be used for vehicle, architectural, powder and other coatings and paints. It is also suitable for silk screen, intaglio, offset and other printing inks. 收起 | |
| Crystal Green HZ-766 | Changzhou Huazhu Pigment Co., Ltd. | Crystal Green HZ-766 is a non-toxic, odorless, flake powder pigment which is acid and alkali resistant. It has a particle size range of 25-250 microns and is reflective green, with a transmission color of rose pink. It can be used for vehicle, architectur...展开 Crystal Green HZ-766 is a non-toxic, odorless, flake powder pigment which is acid and alkali resistant. It has a particle size range of 25-250 microns and is reflective green, with a transmission color of rose pink. It can be used for vehicle, architectural, powder and other coatings and paints. It is also suitable for silk screen, intaglio, offset and other printing inks. 收起 | |
| Crystal Green HZ-786 | Changzhou Huazhu Pigment Co., Ltd. | Crystal Green HZ-786 is a non-toxic, odorless, flake powder pigment which is acid and alkali resistant. It has a particle size range of 10-400 microns and is reflective green, with a transmission color of rose pink. It can be used for vehicle, architectur...展开 Crystal Green HZ-786 is a non-toxic, odorless, flake powder pigment which is acid and alkali resistant. It has a particle size range of 10-400 microns and is reflective green, with a transmission color of rose pink. It can be used for vehicle, architectural, powder and other coatings and paints. It is also suitable for silk screen, intaglio, offset and other printing inks. 收起 | |
| Crystal Red HZ-743 | Changzhou Huazhu Pigment Co., Ltd. | Crystal Red HZ-743 is a non-toxic, odorless, flake powder pigment which is acid and alkali resistant. It has a particle size range of 20-100 microns and is reflective red, with a transmission color of bluish green. It can be used for vehicle, architectura...展开 Crystal Red HZ-743 is a non-toxic, odorless, flake powder pigment which is acid and alkali resistant. It has a particle size range of 20-100 microns and is reflective red, with a transmission color of bluish green. It can be used for vehicle, architectural, powder and other coatings and paints. It is also suitable for silk screen, intaglio, offset and other printing inks. 收起 | |
| Crystal Red HZ-763 | Changzhou Huazhu Pigment Co., Ltd. | Crystal Red HZ-763 is a non-toxic, odorless, flake powder pigment which is acid and alkali resistant. It has a particle size range of 25-250 microns and is reflective red, with a transmission color of bluish green. It can be used for vehicle, architectura...展开 Crystal Red HZ-763 is a non-toxic, odorless, flake powder pigment which is acid and alkali resistant. It has a particle size range of 25-250 microns and is reflective red, with a transmission color of bluish green. It can be used for vehicle, architectural, powder and other coatings and paints. It is also suitable for silk screen, intaglio, offset and other printing inks. 收起 | |
| Crystal Red HZ-783 | Changzhou Huazhu Pigment Co., Ltd. | Crystal Red HZ-783 is a non-toxic, odorless, flake powder pigment which is acid and alkali resistant. It has a particle size range of 10-400 microns and is reflective red, with a transmission color of bluish green. It can be used for vehicle, architectura...展开 Crystal Red HZ-783 is a non-toxic, odorless, flake powder pigment which is acid and alkali resistant. It has a particle size range of 10-400 microns and is reflective red, with a transmission color of bluish green. It can be used for vehicle, architectural, powder and other coatings and paints. It is also suitable for silk screen, intaglio, offset and other printing inks. 收起 | |
| Crystal Silver HZ-740 | Changzhou Huazhu Pigment Co., Ltd. | Crystal Silver HZ-740 is a non-toxic, odorless, flake powder pigment which is acid and alkali resistant. It has a particle size range of 20-100 microns and is reflective silver, with a transmission color of light brown. It can be used for vehicle, archite...展开 Crystal Silver HZ-740 is a non-toxic, odorless, flake powder pigment which is acid and alkali resistant. It has a particle size range of 20-100 microns and is reflective silver, with a transmission color of light brown. It can be used for vehicle, architectural, powder and other coatings and paints. It is also suitable for silk screen, intaglio, offset and other printing inks. 收起 | |
| Crystal Silver HZ-780 | Changzhou Huazhu Pigment Co., Ltd. | Crystal Silver HZ-780 is a non-toxic, odorless, flake powder pigment which is acid and alkali resistant. It has a particle size range of 10-400 microns and is reflective silver, with a transmission color of light brown. It can be used for vehicle, archite...展开 Crystal Silver HZ-780 is a non-toxic, odorless, flake powder pigment which is acid and alkali resistant. It has a particle size range of 10-400 microns and is reflective silver, with a transmission color of light brown. It can be used for vehicle, architectural, powder and other coatings and paints. It is also suitable for silk screen, intaglio, offset and other printing inks. 收起 | |
| Crystal Violet HE-764 | Changzhou Huazhu Pigment Co., Ltd. | Crystal Violet HE-764 is a non-toxic, odorless, flake powder pigment which is acid and alkali resistant. It has a particle size range of 25-250 microns and is reflective violet, with a transmission color of light green. It can be used for vehicle, archite...展开 Crystal Violet HE-764 is a non-toxic, odorless, flake powder pigment which is acid and alkali resistant. It has a particle size range of 25-250 microns and is reflective violet, with a transmission color of light green. It can be used for vehicle, architectural, powder and other coatings and paints. It is also suitable for silk screen, intaglio, offset and other printing inks. 收起 | |
| Crystal Violet HZ-744 | Changzhou Huazhu Pigment Co., Ltd. | Crystal Violet HZ-744 is a non-toxic, odorless, flake powder pigment which is acid and alkali resistant. It has a particle size range of 20-100 microns and is reflective violet, with a transmission color of light green. It can be used for vehicle, archite...展开 Crystal Violet HZ-744 is a non-toxic, odorless, flake powder pigment which is acid and alkali resistant. It has a particle size range of 20-100 microns and is reflective violet, with a transmission color of light green. It can be used for vehicle, architectural, powder and other coatings and paints. It is also suitable for silk screen, intaglio, offset and other printing inks. 收起 | |
| Crystal Violet HZ-784 | Changzhou Huazhu Pigment Co., Ltd. | Crystal Violet HZ-784 is a non-toxic, odorless, flake powder pigment which is acid and alkali resistant. It has a particle size range of 10-400 microns and is reflective violet, with a transmission color of light green. It can be used for vehicle, archite...展开 Crystal Violet HZ-784 is a non-toxic, odorless, flake powder pigment which is acid and alkali resistant. It has a particle size range of 10-400 microns and is reflective violet, with a transmission color of light green. It can be used for vehicle, architectural, powder and other coatings and paints. It is also suitable for silk screen, intaglio, offset and other printing inks. 收起 | |
| DA-1 | Changzhou Huazhu Pigment Co., Ltd. | DA-1 is a bright, conductive pigment in the form of a light gray powder. It has a particle size of less than 1 micron and a resistivity of ≤200Ω·cm. It can be mixed with other pigments to provide colorful conductive coatings for applications in printing i...展开 DA-1 is a bright, conductive pigment in the form of a light gray powder. It has a particle size of less than 1 micron and a resistivity of ≤200Ω·cm. It can be mixed with other pigments to provide colorful conductive coatings for applications in printing inks, coatings and paints where conductivity and good heat and chemical resistance are desired. 收起 | |
| DM-1 | Changzhou Huazhu Pigment Co., Ltd. | DM-1 is a bright, conductive pigment in the form of a light gray powder. It has a particle size of less than 25 microns and a resistivity of ≤200Ω·cm. It can be mixed with other pigments to provide colorful conductive coatings for applications in printing...展开 DM-1 is a bright, conductive pigment in the form of a light gray powder. It has a particle size of less than 25 microns and a resistivity of ≤200Ω·cm. It can be mixed with other pigments to provide colorful conductive coatings for applications in printing inks, coatings and paints where conductivity and good heat and chemical resistance are desired. 收起 | |
| DM-2 | Changzhou Huazhu Pigment Co., Ltd. | DM-2 is a bright, conductive pigment in the form of a light gray powder. It has a particle size of less than 60 microns and a resistivity of ≤200Ω·cm. It can be mixed with other pigments to provide colorful conductive coatings for applications in printing...展开 DM-2 is a bright, conductive pigment in the form of a light gray powder. It has a particle size of less than 60 microns and a resistivity of ≤200Ω·cm. It can be mixed with other pigments to provide colorful conductive coatings for applications in printing inks, coatings and paints where conductivity and good heat and chemical resistance are desired. 收起 | |
| DYHARD® 100 | AlzChem AG | DYHARD® 100 is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations...展开 DYHARD® 100 is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations and to improve handling. The products of the DYHARD® 100 series do not react with epoxy resins at moderate temperatures. Dispersed in epoxy resin the mixture remains stable until activated by heat. 收起 | |
| DYHARD® 100S | AlzChem AG | DYHARD® 100S is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomeration...展开 DYHARD® 100S is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations and to improve handling. The products of the DYHARD® 100 series do not react with epoxy resins at moderate temperatures. Dispersed in epoxy resin the mixture remains stable until activated by heat. 收起 | |
| DYHARD® 100SF | AlzChem AG | DYHARD® 100SF is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomeratio...展开 DYHARD® 100SF is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations and to improve handling. The products of the DYHARD® 100 series do not react with epoxy resins at moderate temperatures. Dispersed in epoxy resin the mixture remains stable until activated by heat. 收起 | |
| DYHARD® 100SH | AlzChem AG | DYHARD® 100SH is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomeratio...展开 DYHARD® 100SH is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations and to improve handling. The products of the DYHARD® 100 series do not react with epoxy resins at moderate temperatures. Dispersed in epoxy resin the mixture remains stable until activated by heat. 收起 | |
| DYHARD® A5M30 | AlzChem AG | DYHARD® A5M30 is widely used as a highly active but also latent accelerator master batch of DYHARD® UR500 in thermosetting epoxy resin formulations. It is especially designed for dust free work environments and easy to mix in productions | |
| DYHARD® CAAB | AlzChem AG | DYHARD® CAAB is a curing agent for matt finish powder coatings based on epoxy or epoxy-polyester hybrid formulations. Usually it is used together with DYHARD® PIN to realize these matt finishes. For low gloss applications the optimal mixing ratio between ...展开 DYHARD® CAAB is a curing agent for matt finish powder coatings based on epoxy or epoxy-polyester hybrid formulations. Usually it is used together with DYHARD® PIN to realize these matt finishes. For low gloss applications the optimal mixing ratio between DYHARD® PIN and DYHARD® CAAB is 45:55. This ideal mixture is also available in the ready to use premix DYHARD® PMC for an easy handling. 收起 | |
| DYHARD® D50EP | AlzChem AG | DYHARD® D50EP is a master batch of 50% DYHARD® 100S in standard bisphenol A epoxy resin (EEW 182-192). Advantages include a dust-free production environment, as well as easier dosage and incorporation. It is cost-effective due to easy handling, and offers...展开 DYHARD® D50EP is a master batch of 50% DYHARD® 100S in standard bisphenol A epoxy resin (EEW 182-192). Advantages include a dust-free production environment, as well as easier dosage and incorporation. It is cost-effective due to easy handling, and offers the same reactivity, latency, and mechanical properties as the DYHARD® 100 series. This product is recommended for one-component thermosetting epoxy resin formulations for the automotive, sporting goods, and aerospace industry, for adhesives, for encapsulation compounds, and more. 收起 | |
| DYHARD® DF50EP | AlzChem AG | DYHARD® DF50EP is a master batch of 50% DYHARD® 100SF in standard bisphenol A epoxy resin (EEW 182-192). Products of the DYHARD® master batches are widely used for all kinds of one component thermosetting epoxy resin formulations | |
| DYHARD® Fluid 111 | AlzChem AG | DYHARD® Fluid 111 is a liquid latent curing agent for thermosetting epoxy resin formulations. | |
| DYHARD® Fluid 151 | AlzChem AG | DYHARD® Fluid 151 is part of a fully formulated latent epoxy resin system, which has been specifically designed for resin transfer molding applications. | |
| DYHARD® Fluid 212 | AlzChem AG | DYHARD® Fluid 212 is a liquid latent curing agent. It features a long pot life in the impregnation bath, a rapid cure at 120ºC, optical clearness, and high transparency. This makes it ideal for use in filament winding applications. | |
| DYHARD® Fluid AC11 | AlzChem AG | DYHARD® Fluid AC11 is part of a fully formulated latent epoxy resin system, which has been specifically designed for resin transfer molding applications. | |
| DYHARD® MCA10 | AlzChem AG | DYHARD® MCA10 is a special formulated curing agent for low temperature cure, or very fast cure at standard cure temperatures. A formulated 1K-Epoxy resins system with DYHARD® MCA10 still has an acceptable long latency of a few weeks at room temperature. | |
| DYHARD® MCA30 | AlzChem AG | DYHARD® MCA30 is a non toxic, special formulated curing agent for low temperature cure, high gloss epoxy powder coatings. | |
| DYHARD® MI-C | AlzChem AG | DYHARD® MI-C is used as a very active but also reasonably latent accelerator in thermosetting epoxy resin formulations. It is typically used for fast curing, or low temperature cure, resin systems with low latency requirements. | |
| DYHARD® MI-FF | AlzChem AG | DYHARD® MI-FF is used as a very active but also reasonably latent accelerator in thermosetting epoxy resin formulations. It is typically used for fast curing, or low temperature cure, resin systems with low latency requirements. | |
| DYHARD® MIA5 | AlzChem AG | DYHARD® MIA5 is used as a very active but also reasonably latent accelerator in thermosetting epoxy resin formulations. It’s use is particularly suited in combination with micronized dicyandiamide from the DYHARD® CU-Line, or with the dicyandiamide master...展开 DYHARD® MIA5 is used as a very active but also reasonably latent accelerator in thermosetting epoxy resin formulations. It’s use is particularly suited in combination with micronized dicyandiamide from the DYHARD® CU-Line, or with the dicyandiamide master batches from the DYHARD® MB-Line. 收起 | |
| DYHARD® OTB | AlzChem AG | DYHARD® OTB represents a medium reactive curing agent for high gloss epoxy powder coatings. With it’s ideal distribution properties in epoxy resins high quality finishes at low curing temperatures are provided. | |
| DYHARD® PI | AlzChem AG | DYHARD® PI represents an imidazole based accelerator and/or hardener for thermosetting epoxy resin systems. It has a larger particle size than DYHARD® PI-FF, which is more suitable where lower reactiviy's are needed. | |
| DYHARD® PI-FF | AlzChem AG | DYHARD® PI-FF represents an imidazole based accelerator and/or hardener for thermosetting epoxy resin systems. DYHARD® PI-FF has a smaller particle size than DYHARD® PI and hence is more suitable where higher reactivity's are needed. | |
| DYHARD® PIN | AlzChem AG | DYHARD® PIN represents a curing agent which is used in low gloss epoxy and epoxy-polyester hybrid powder coatings. It’s ideal distribution properties in both resin systems provides high quality finishes with a very good color stability. | |
| DYHARD® PMC | AlzChem AG | DYHARD® PMC represents a matt curing agent for low gloss epoxy and epoxy-polyester hybrid powder coatings. With its ideal distribution properties in both resins systems, high quality finishes with a very good color stability are provided. | |
| DYHARD® RF1000 | AlzChem AG | DYHARD® RF1000 is part of a fully formulated latent epoxy resin system, which has been specifically designed for resin transfer molding applications. | |
| DYHARD® RF2100 | AlzChem AG | DYHARD® RF2100 is a low viscos modified bisphenol A epoxy resin. It features a long pot life in the impregnation bath, a rapid cure at 120ºC, optical clearness, and high transparency. This makes it ideal for use in filament winding applications. | |
| DYHARD® UR200 | AlzChem AG | DYHARD® UR200 represents a latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. | |
| DYHARD® UR300 | AlzChem AG | DYHARD® UR300 represents a latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. | |
| DYHARD® UR300AB | AlzChem AG | DYHARD® UR300AB represents a latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. | |
| DYHARD® UR400 | AlzChem AG | DYHARD® UR400 represents a bi-functional, micronized accelerator based on a substituted urea. Being an active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in...展开 DYHARD® UR400 represents a bi-functional, micronized accelerator based on a substituted urea. Being an active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. 收起 | |
| DYHARD® UR500 | AlzChem AG | DYHARD® UR500 represents a bi-functional, micronized accelerator based on a substituted urea. Being a highly active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 ser...展开 DYHARD® UR500 represents a bi-functional, micronized accelerator based on a substituted urea. Being a highly active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. 收起 | |
| DYHARD® UR700 | AlzChem AG | DYHARD® UR700 represents a highly latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. In addit...展开 DYHARD® UR700 represents a highly latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. In addition, DYHARD® UR700 is soluble in water, which makes it a preferred accelerator for waterborne applications. 收起 | |
| DYHARD® UR800 | AlzChem AG | DYHARD® UR800 represents a very latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. | |
| DYHARD® URAcc13 | AlzChem AG | DYHARD® URAcc13 represents a formulated latent, micronized accelerator based on a substituted urea. Being an active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 ser...展开 DYHARD® URAcc13 represents a formulated latent, micronized accelerator based on a substituted urea. Being an active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. 收起 | |
| DYHARD® URAcc57 | AlzChem AG | DYHARD® URAcc57 represents a latent, micronized accelerator based on a substituted urea. Being a very highly active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 ser...展开 DYHARD® URAcc57 represents a latent, micronized accelerator based on a substituted urea. Being a very highly active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. 收起 | |
| Ethyl Acetate (EA) | TOP Solvent Company Limited | Ethyl acetate (EA) is a neutral colorless liquid with a pleasantly fruity odor. Ethyl acetate is primarily used in the production of nitrocellulose and cellulose acetate lacquers and as a solvent in adhesives and coatings. | |
| ExBar™ 200 | Excalibar Minerals LLC | ExBar™ 200 is a raw mineral material that is manufactured from natural barium sulfate ore. This product is used in many different applications such as paints, adhesives and sealants. It has a median particle size of 15.0u and an oil absorption of 9. | |
| ExBar™ 325 | Excalibar Minerals LLC | ExBar™ 325 is a raw mineral material that is manufactured from natural barium sulfate ore. This product is used in many different applications such as paints, adhesives and sealants. It has a median particle size of 10.0u and an oil absorption of 10. | |
| ExBar™ 400 | Excalibar Minerals LLC | ExBar™ 400 is a raw mineral material that is manufactured from natural barium sulfate ore. This product is used in many different applications such as paints, adhesives and sealants. It has a median particle size of 8.0u and an oil absorption of 12. | |
| ExBar™ W 1 | Excalibar Minerals LLC | ExBar™ W 1 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 1 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 1u and an oil absorption of 15. 收起 | |
| ExBar™ W 2 | Excalibar Minerals LLC | ExBar™ W 2 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 2 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 2u and an oil absorption of 13. 收起 | |
| ExBar™ W 3 | Excalibar Minerals LLC | ExBar™ W 3 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 3 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 3u and an oil absorption of 13. 收起 | |
| ExBar™ W 325 | Excalibar Minerals LLC | ExBar™ W 325 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are pr...展开 ExBar™ W 325 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. 收起 | |
| ExBar™ W 4 | Excalibar Minerals LLC | ExBar™ W 4 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 4 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 4u and an oil absorption of 12. 收起 | |
| ExBar™ W 400 | Excalibar Minerals LLC | ExBar™ W 400 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are pr...展开 ExBar™ W 400 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 8u and an oil absorption of 10. 收起 | |
| ExCal® 100 | Excalibar Minerals LLC | ExCal® 100 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications. | |
| ExCal® 200 | Excalibar Minerals LLC | ExCal® 200 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications. | |
| ExCal® 325 | Excalibar Minerals LLC | ExCal® 325 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications. | |
| ExCal® 400 | Excalibar Minerals LLC | ExCal® 400 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications. | |
| ExCal® CW 100 | Excalibar Minerals LLC | ExCal® CW 100 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand ar...展开 ExCal® CW 100 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand are a standard. 收起 | |
| ExCal® CW 200 | Excalibar Minerals LLC | ExCal® CW 200 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand ar...展开 ExCal® CW 200 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand are a standard. 收起 | |
| ExCal® CW 325 | Excalibar Minerals LLC | ExCal® CW 325 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand ar...展开 ExCal® CW 325 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand are a standard. 收起 | |
| Fumed Silica | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Fumed silica is a high value-added fine chemical product; it is a white, loose, amorphous, non-toxic, non-polluting inorganic non-metallic oxide.The primary particle size betweens 7 ~ 40nm and the specific surface area is generally greater than 100m2 / g....展开 Fumed silica is a high value-added fine chemical product; it is a white, loose, amorphous, non-toxic, non-polluting inorganic non-metallic oxide.The primary particle size betweens 7 ~ 40nm and the specific surface area is generally greater than 100m2 / g. Because of its nano-effects, in the material the fumed silica exhibits excellent properties of reinforcing, thickening, thixotropic, insulation, matting, anti-sagging, which are widely used in the silicone rubber (polyester plastics, sealing materials,etc.), siliconeglue (adhesives,paints,coatings,etc.)and high-performance fibers, new synthetic unsaturated resin, electric insulation, inks, pharmaceuticals, paper, food, cosmetics, chemical mechanical polishing, etc., to be known as the "industrial MSG". 收起 | |
| Golden H-231 | Changzhou Huazhu Pigment Co., Ltd. | Golden H-231 is a synthetic pearlescent pigment with alternating layers of TiO2 and Fe2O3 layers. It has a range of particle sizes from 10 to 60 microns, with a green-gold luster effect. It can be used for vehicle, architectural, powder and other coating...展开 Golden H-231 is a synthetic pearlescent pigment with alternating layers of TiO2 and Fe2O3 layers. It has a range of particle sizes from 10 to 60 microns, with a green-gold luster effect. It can be used for vehicle, architectural, powder and other coatings and paints. It is also suitable for silk screen, intaglio, offset and other printing inks. 收起 | |
| Golden H-232 | Changzhou Huazhu Pigment Co., Ltd. | Golden H-232 is a synthetic pearlescent pigment with alternating layers of TiO2 and Fe2O3 layers. It has a range of particle sizes from 5 to 25 microns, with a golden luster effect. It can be used for vehicle, architectural, powder and other coatings and...展开 Golden H-232 is a synthetic pearlescent pigment with alternating layers of TiO2 and Fe2O3 layers. It has a range of particle sizes from 5 to 25 microns, with a golden luster effect. It can be used for vehicle, architectural, powder and other coatings and paints. It is also suitable for silk screen, intaglio, offset and other printing inks. 收起 | |
| Golden H-233 | Changzhou Huazhu Pigment Co., Ltd. | Golden H-233 is a synthetic pearlescent pigment with alternating layers of TiO2 and Fe2O3 layers. It has a range of particle sizes from 5 to 25 microns, with a red-gold luster effect. It can be used for vehicle, architectural, powder and other coatings a...展开 Golden H-233 is a synthetic pearlescent pigment with alternating layers of TiO2 and Fe2O3 layers. It has a range of particle sizes from 5 to 25 microns, with a red-gold luster effect. It can be used for vehicle, architectural, powder and other coatings and paints. It is also suitable for silk screen, intaglio, offset and other printing inks. 收起 | |
| Golden H-234 | Changzhou Huazhu Pigment Co., Ltd. | Golden H-234 is a synthetic pearlescent pigment with alternating layers of TiO2 and Fe2O3 layers. It has a range of particle sizes from 5 to 25 microns, with a green-gold luster effect. It can be used for vehicle, architectural, powder and other coatings...展开 Golden H-234 is a synthetic pearlescent pigment with alternating layers of TiO2 and Fe2O3 layers. It has a range of particle sizes from 5 to 25 microns, with a green-gold luster effect. It can be used for vehicle, architectural, powder and other coatings and paints. It is also suitable for silk screen, intaglio, offset and other printing inks. 收起 | |
| Golden H-236 | Changzhou Huazhu Pigment Co., Ltd. | Golden H-236 is a synthetic pearlescent pigment with alternating layers of TiO2 and Fe2O3 layers. It has a range of particle sizes from 10 to 60 microns, with a red-gold luster effect. It can be used for vehicle, architectural, powder and other coatings ...展开 Golden H-236 is a synthetic pearlescent pigment with alternating layers of TiO2 and Fe2O3 layers. It has a range of particle sizes from 10 to 60 microns, with a red-gold luster effect. It can be used for vehicle, architectural, powder and other coatings and paints. It is also suitable for silk screen, intaglio, offset and other printing inks. 收起 | |
| Golden H-250 | Changzhou Huazhu Pigment Co., Ltd. | Golden H-250 is a synthetic pearlescent pigment with alternating layers of TiO2 and Fe2O3 layers. It has a range of particle sizes from 10 to 120 microns, with a golden luster effect. It can be used for vehicle, architectural, powder and other coatings a...展开 Golden H-250 is a synthetic pearlescent pigment with alternating layers of TiO2 and Fe2O3 layers. It has a range of particle sizes from 10 to 120 microns, with a golden luster effect. It can be used for vehicle, architectural, powder and other coatings and paints. It is also suitable for silk screen, intaglio, offset and other printing inks. 收起 | |
| Golden H-251 | Changzhou Huazhu Pigment Co., Ltd. | Golden H-251 is a synthetic pearlescent pigment with alternating layers of TiO2 and Fe2O3 layers. It has a range of particle sizes from 10 to 120 microns, with a green-gold luster effect. It can be used for vehicle, architectural, powder and other coatin...展开 Golden H-251 is a synthetic pearlescent pigment with alternating layers of TiO2 and Fe2O3 layers. It has a range of particle sizes from 10 to 120 microns, with a green-gold luster effect. It can be used for vehicle, architectural, powder and other coatings and paints. It is also suitable for silk screen, intaglio, offset and other printing inks. 收起 | |
| Golden H-252 | Changzhou Huazhu Pigment Co., Ltd. | Golden H-252 is a synthetic pearlescent pigment with alternating layers of TiO2 and Fe2O3 layers. It has a range of particle sizes from 10 to 120 microns, with a red-gold luster effect. It can be used for vehicle, architectural, powder and other coatings...展开 Golden H-252 is a synthetic pearlescent pigment with alternating layers of TiO2 and Fe2O3 layers. It has a range of particle sizes from 10 to 120 microns, with a red-gold luster effect. It can be used for vehicle, architectural, powder and other coatings and paints. It is also suitable for silk screen, intaglio, offset and other printing inks. 收起 | |
| Golden H-270 | Changzhou Huazhu Pigment Co., Ltd. | Golden H-270 is a synthetic pearlescent pigment with alternating layers of TiO2 and Fe2O3 layers. It has a range of particle sizes from 30 to 300 microns, with a golden luster effect. It can be used for vehicle, architectural, powder and other coatings a...展开 Golden H-270 is a synthetic pearlescent pigment with alternating layers of TiO2 and Fe2O3 layers. It has a range of particle sizes from 30 to 300 microns, with a golden luster effect. It can be used for vehicle, architectural, powder and other coatings and paints. It is also suitable for silk screen, intaglio, offset and other printing inks. 收起 | |
| Golden H-271 | Changzhou Huazhu Pigment Co., Ltd. | Golden H-271 is a synthetic pearlescent pigment with alternating layers of TiO2 and Fe2O3 layers. It has a range of particle sizes from 30 to 300 microns, with a green-gold luster effect. It can be used for vehicle, architectural, powder and other coatin...展开 Golden H-271 is a synthetic pearlescent pigment with alternating layers of TiO2 and Fe2O3 layers. It has a range of particle sizes from 30 to 300 microns, with a green-gold luster effect. It can be used for vehicle, architectural, powder and other coatings and paints. It is also suitable for silk screen, intaglio, offset and other printing inks. 收起 | |
| Golden H-272 | Changzhou Huazhu Pigment Co., Ltd. | Golden H-272 is a synthetic pearlescent pigment with alternating layers of TiO2 and Fe2O3 layers. It has a range of particle sizes from 30 to 300 microns, with a red-gold luster effect. It can be used for vehicle, architectural, powder and other coatings...展开 Golden H-272 is a synthetic pearlescent pigment with alternating layers of TiO2 and Fe2O3 layers. It has a range of particle sizes from 30 to 300 microns, with a red-gold luster effect. It can be used for vehicle, architectural, powder and other coatings and paints. It is also suitable for silk screen, intaglio, offset and other printing inks. 收起 | |
| Hydroxypropyl Aistarch Phosphate | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Hydroxypropyl Aistarch Phosphate is a fine white to off white powder with a characteristic odor. This product has good cutting resistance, good acid and alkali resistance, and high viscosity. It is used it as thickening agent in wallpaper adhesive. | |
| HZ-323G | Changzhou Huazhu Pigment Co., Ltd. | HZ-323G is a synthetic pearlescent pigment with a transparent colored topcoat. It has a range of particle sizes from 10 to 60 microns, with an apple green coloration. It can be used for vehicle, architectural, powder and other coatings and paints. It is ...展开 HZ-323G is a synthetic pearlescent pigment with a transparent colored topcoat. It has a range of particle sizes from 10 to 60 microns, with an apple green coloration. It can be used for vehicle, architectural, powder and other coatings and paints. It is also suitable for silk screen, intaglio, offset and other printing inks. 收起 | |
| HZ-401 | Changzhou Huazhu Pigment Co., Ltd. | HZ-401 is a synthetic pearlescent pigment with a transparent colored topcoat. It has a range of particle sizes from 10 to 60 microns, with a red coloration. It can be used for vehicle, architectural, powder and other coatings and paints. It is also suita...展开 HZ-401 is a synthetic pearlescent pigment with a transparent colored topcoat. It has a range of particle sizes from 10 to 60 microns, with a red coloration. It can be used for vehicle, architectural, powder and other coatings and paints. It is also suitable for silk screen, intaglio, offset and other printing inks. 收起 | |
| HZ-402 | Changzhou Huazhu Pigment Co., Ltd. | HZ-402 is a synthetic pearlescent pigment with a transparent colored topcoat. It has a range of particle sizes from 10 to 60 microns, with a blue coloration. It can be used for vehicle, architectural, powder and other coatings and paints. It is also suit...展开 HZ-402 is a synthetic pearlescent pigment with a transparent colored topcoat. It has a range of particle sizes from 10 to 60 microns, with a blue coloration. It can be used for vehicle, architectural, powder and other coatings and paints. It is also suitable for silk screen, intaglio, offset and other printing inks. 收起 | |
| HZ-403 | Changzhou Huazhu Pigment Co., Ltd. | HZ-403 is a synthetic pearlescent pigment with a transparent colored topcoat. It has a range of particle sizes from 10 to 60 microns, with a green coloration. It can be used for vehicle, architectural, powder and other coatings and paints. It is also sui...展开 HZ-403 is a synthetic pearlescent pigment with a transparent colored topcoat. It has a range of particle sizes from 10 to 60 microns, with a green coloration. It can be used for vehicle, architectural, powder and other coatings and paints. It is also suitable for silk screen, intaglio, offset and other printing inks. 收起 | |
| HZ-404 | Changzhou Huazhu Pigment Co., Ltd. | HZ-404 is a synthetic pearlescent pigment with a transparent colored topcoat. It has a range of particle sizes from 10 to 60 microns, with a purple coloration. It can be used for vehicle, architectural, powder and other coatings and paints. It is also su...展开 HZ-404 is a synthetic pearlescent pigment with a transparent colored topcoat. It has a range of particle sizes from 10 to 60 microns, with a purple coloration. It can be used for vehicle, architectural, powder and other coatings and paints. It is also suitable for silk screen, intaglio, offset and other printing inks. 收起 | |
| HZ-406 | Changzhou Huazhu Pigment Co., Ltd. | HZ-406 is a synthetic pearlescent pigment with a transparent colored topcoat. It has a range of particle sizes from 10 to 60 microns, with a silver gray coloration. It can be used for vehicle, architectural, powder and other coatings and paints. It is al...展开 HZ-406 is a synthetic pearlescent pigment with a transparent colored topcoat. It has a range of particle sizes from 10 to 60 microns, with a silver gray coloration. It can be used for vehicle, architectural, powder and other coatings and paints. It is also suitable for silk screen, intaglio, offset and other printing inks. 收起 | |
| HZ-407 | Changzhou Huazhu Pigment Co., Ltd. | HZ-407 is a synthetic pearlescent pigment with a transparent colored topcoat. It has a range of particle sizes from 10 to 60 microns, with a black coloration. It can be used for vehicle, architectural, powder and other coatings and paints. It is also sui...展开 HZ-407 is a synthetic pearlescent pigment with a transparent colored topcoat. It has a range of particle sizes from 10 to 60 microns, with a black coloration. It can be used for vehicle, architectural, powder and other coatings and paints. It is also suitable for silk screen, intaglio, offset and other printing inks. 收起 |
