UL Prospector

成功!

成功保存搜索结果
Acetone TOP Solvent Company Limited Acetone, also known as 2-propanone or dimethyl ketone (DMK), is a colorless, low boiling, easy pouring liquid with a distinguishing odor. It is miscible in all proportions with water, alcohols, many hydrocarbons and other organic liquids. It has solvent p...展开 Acetone, also known as 2-propanone or dimethyl ketone (DMK), is a colorless, low boiling, easy pouring liquid with a distinguishing odor. It is miscible in all proportions with water, alcohols, many hydrocarbons and other organic liquids. It has solvent properties for vegetable and animal fats, cellulose, natural and synthetic resins and many other organic substances. The primary use for this product is in printing inks, adhesives, paints and coatings. 收起
Butyl Glycol Ether (BGE) TOP Solvent Company Limited Butyl Glycol Ether (BGE) is a colorless, slight smelling liquid with a high boiling point. This product has small hygroscopic properties and is miscible with water at room temperature. This liquid solution is also miscible with several different oxygenate...展开 Butyl Glycol Ether (BGE) is a colorless, slight smelling liquid with a high boiling point. This product has small hygroscopic properties and is miscible with water at room temperature. This liquid solution is also miscible with several different oxygenated solvents, as well as with aliphatic and aromatic hydrocarbons and oils. It is solvent for many natural and synthetic resins, nitrocellulose and ethyl cellulose. Butyl Glycol Either (BGE) is primarily used as a solvent in printing inks, paints and coatings. 收起
Request Sample DEGALAN® 4150 E Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DEGALAN® 4150 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylen...展开 DEGALAN® 4150 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene therephthalate (PET) or vinyl (PVC). DEGALAN® 4150 E will give good adhesion to aluminium in formulation with PVC-copolymer. Primered with polyester like DYNAPOL® L 206 or 208[1] adhesion to PET is achieved. 收起
Request Sample DEGALAN® 4151 E Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DEGALAN® 4151 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is applied as an universal binder in PVC free, primerless heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (...展开 DEGALAN® 4151 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is applied as an universal binder in PVC free, primerless heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene terephthalate (PET) or vinyl (PVC). Primered with polyesters like DYNAPOL® L 206 / 208[1] adhesion to PET is achieved. 收起
Request Sample DEGALAN® 4174 E Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DEGALAN® 4174 E is an organic dispersion of copolymers on methacrylic esters, olefins and polyesters basis. DEGALAN® VP 4174 E achieves direct adhesion on aluminium and PET. Usage as an universal binder in PVC-free heat seal lacquers for sealing aluminium...展开 DEGALAN® 4174 E is an organic dispersion of copolymers on methacrylic esters, olefins and polyesters basis. DEGALAN® VP 4174 E achieves direct adhesion on aluminium and PET. Usage as an universal binder in PVC-free heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene terephthalate (PET) or vinyl (PVC). 收起
Request Sample DEGALAN® 4792 L Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DEGALAN® 4792 L is an organic solution based on ethyl methacrylate. It is suitable as a heat seal binder for sealing aluminium foil versus polystyrene (PS), vinyl (PVC) or polyvinylidene chloride (PVdC). DEGALAN® 4792 L is tailormade for applications wher...展开 DEGALAN® 4792 L is an organic solution based on ethyl methacrylate. It is suitable as a heat seal binder for sealing aluminium foil versus polystyrene (PS), vinyl (PVC) or polyvinylidene chloride (PVdC). DEGALAN® 4792 L is tailormade for applications where low temperature sealing and easy peel behavior are required. In formulations with PVC copolymer DEGALAN® 4792 L will achieve good adhesion to aluminium. 收起
Request Sample DEGALAN® 4793 L Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DEGALAN® 4793 L is an organic solution based on ethyl methacrylate. It is suitable as a heat seal binder for sealing aluminium foil versus polystyrene (PS), vinyl (PVC) or polyvinylidene chloride (PVdC). DEGALAN® 4793 L is tailormade for applications wher...展开 DEGALAN® 4793 L is an organic solution based on ethyl methacrylate. It is suitable as a heat seal binder for sealing aluminium foil versus polystyrene (PS), vinyl (PVC) or polyvinylidene chloride (PVdC). DEGALAN® 4793 L is tailormade for applications where low temperature sealing and easy peel behavior are required. In formulations with PVC copolymer DEGALAN® 4793 L will achieve good adhesion to aluminium. 收起
Request Sample DEGALAN® P 24 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DEGALAN® P 24 is a bead polymer based on methyl methacrylate and n-butyl methacrylate. It is mainly applied as a heat seal binder for sealing aluminium foil versus polystyrene (PS), vinyl (PVC) or polyvinylidene chloride (PVdC). DEGALAN® P 24 in formulati...展开 DEGALAN® P 24 is a bead polymer based on methyl methacrylate and n-butyl methacrylate. It is mainly applied as a heat seal binder for sealing aluminium foil versus polystyrene (PS), vinyl (PVC) or polyvinylidene chloride (PVdC). DEGALAN® P 24 in formulation with PVC-copolymer shows excellent performance in aluminum blister and food packaging. Primed with polyesters like DYNAPOL® L 206 / 208[1] adhesion to PET is achieved. 收起
Request Sample DEGALAN® PM 555 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DEGALAN® PM 555 is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylen...展开 DEGALAN® PM 555 is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene therephthalate (PET) or vinyl (PVC). DEGALAN® PM 555 will give good adhesion to aluminium in formulation with PVC-copolymer. Primered with polyester like DYNAPOL® L 206 or 208[1] adhesion to PET is achieved. 收起
Request Sample DEGALAN® PM 666 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DEGALAN® PM 666 is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is applied as an universal binder in PVC free, primerless heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (...展开 DEGALAN® PM 666 is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is applied as an universal binder in PVC free, primerless heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene terephthalate (PET) or vinyl (PVC). Primered with polyesters like DYNAPOL® L 206 / 208[1] adhesion to PET is achieved. 收起
Request Sample DEGALAN® VP 4220 E Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DEGALAN® VP 4220 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethy...展开 DEGALAN® VP 4220 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene therephthalate (PET) or vinyl (PVC). DEGALAN® VP 4220 E will achieve good adhesion to aluminium in formulation with PVC-copolymer. Primered with polyester like DYNAPOL® L 206 or 208[1] adhesion to PET is achieved. Due to narrow molecular weight distribution, rub-off deposits can be minimized which leads to higher productivity. 收起
Request Sample DEGALAN® VP 4221 E Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DEGALAN® VP 4221 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is applied as an universal binder in PVC free, primerless heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyren...展开 DEGALAN® VP 4221 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is applied as an universal binder in PVC free, primerless heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene terephthalate (PET) or vinyl (PVC). Primed with polyesters like DYNAPOL® L 206 / 208[1] adhesion to PET is achieved. Due to narrow molecular weight distribution, rub-off deposits can be minimized which leads to higher productivity. 收起
Request Sample DEGALAN® VP 4240 D Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DEGALAN® VP 4240 D is an aqueous emulsion of a thermoplastic, pure acrylic resin. Major application is binder for sealing aluminium foil versus polystyrene (PS), vinyl (PVC) or polyvinylidene chloride (PVdC). DEGALAN® VP 4240 D achieves direct adhesion to...展开 DEGALAN® VP 4240 D is an aqueous emulsion of a thermoplastic, pure acrylic resin. Major application is binder for sealing aluminium foil versus polystyrene (PS), vinyl (PVC) or polyvinylidene chloride (PVdC). DEGALAN® VP 4240 D achieves direct adhesion to aluminium, no primer is required. 收起
Request Sample DEGALAN® VP 4250 E Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DEGALAN® VP 4250 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethy...展开 DEGALAN® VP 4250 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene terephthalate (PET) or vinyl (PVC). DEGALAN® VP 4250 E will achieve good adhesion to aluminium in formulation with PVC-copolymer. Primed with polyesters like DYNAPOL® L 206 / 208[1] adhesion to PET is achieved. Due to narrow molecular weight distribution, rub-off deposits can be minimized which leads to higher productivity. Additionally, DEGALAN® VP 4250 E has a higher solid content compared to the equivalent grade DEGALAN® 4150 E. 收起
Request Sample DEGALAN® VP 4251 E Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DEGALAN® VP 4251 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. DEGALAN® VP 4251 E is applied as an universal binder in PVC-free heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polyst...展开 DEGALAN® VP 4251 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. DEGALAN® VP 4251 E is applied as an universal binder in PVC-free heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene therephthalate (PET) or vinyl (PVC). Primed with polyesters like DYNAPOL® L 206 / 208[1] adhesion to PET is achieved. Due to narrow molecular weight distribution, rub-off deposits can be minimized which leads to higher productivity. Additionally, DEGALAN® VP 4251 E has a higher solid content compared to the equivalent grade DEGALAN® 4151 E. 收起
Request Sample DEGALAN® VP 4294 E Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DEGALAN® VP 4294 E is an organic dispersion of copolymers on methacrylic esters, olefins and polyesters basis. It is suitable as an universal binder in PVC-free heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyre...展开 DEGALAN® VP 4294 E is an organic dispersion of copolymers on methacrylic esters, olefins and polyesters basis. It is suitable as an universal binder in PVC-free heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene terephthalate (PET), polylactic acid (PLA) or vinyl (PVC). Due to narrow molecular weight distribution, rub-off deposits can be minimized which leads to higher productivity. Additionally, DEGALAN® VP 4294 E has a high solid content of 52%. 收起
Request Sample DEGALAN® VP 4311 E Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DEGALAN® VP 4311 E is an organic dispersion of copolymers on methacrylic esters, olefins and polyesters basis. DEGALAN® VP 4311 E achieves direct adhesion on aluminium and PET. Major usage is as a binder in PVC-free, primerless heat seal lacquers for sea...展开 DEGALAN® VP 4311 E is an organic dispersion of copolymers on methacrylic esters, olefins and polyesters basis. DEGALAN® VP 4311 E achieves direct adhesion on aluminium and PET. Major usage is as a binder in PVC-free, primerless heat seal lacquers for sealing aluminium foil or PET film versus polystyrene (PS), polyethylene terephthalate (PET), poly lactic acid (PLA) and polyvinyl chloride (PVC). 收起
Request Sample DEGALAN® VP 4322 E Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DEGALAN® VP 4322 E is an organic dispersion of copolymers on methacrylic esters, olefins and polyesters basis. DEGALAN® VP 4322 E achieves direct adhesion on aluminium and PET. Due to its low haze properties when dry coated, it is ideally suited for tran...展开 DEGALAN® VP 4322 E is an organic dispersion of copolymers on methacrylic esters, olefins and polyesters basis. DEGALAN® VP 4322 E achieves direct adhesion on aluminium and PET. Due to its low haze properties when dry coated, it is ideally suited for transparent applications. General usage is as a binder in PVC-free heat seal lacquers for sealing aluminium foil or PET film versus polystyrene (PS), polyethylene terephthalate (PET), poly lactic acid (PLA) and polyvinyl chloride (PVC). 收起
Request Sample DEGALAN® VP P 34 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DEGALAN® VP P 34 is a bead polymer based on methyl methacrylate and n-butyl methacrylate. Usage as a heat seal binder for sealing aluminium foil versus polystyrene (PS), vinyl (PVC) or polyvinylidene chloride (PVdC). It is particularly recommended for use...展开 DEGALAN® VP P 34 is a bead polymer based on methyl methacrylate and n-butyl methacrylate. Usage as a heat seal binder for sealing aluminium foil versus polystyrene (PS), vinyl (PVC) or polyvinylidene chloride (PVdC). It is particularly recommended for use as a heat seal binder with direct adhesion to aluminium. A formulation with PVC-copolymer is therefore obsolete. DEGALAN®VP P 34 shows excellent performance in aluminium blister and food packaging. 收起
Request Sample DYNAPOL® Catalyst 1203 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® Catalyst 1203 is a non-ionic blocked sulfonic acid catalyst for aminoplast crosslinking. It is supplied in the form of 50% in xylene.
Request Sample DYNAPOL® Catalyst C 31 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins 改性四烷氧基锡。用于瓷漆烤漆的PUR体系。封端单组分聚酯-聚氨酯体系。
Request Sample DYNAPOL® L 205 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® L 205 is a saturated, high molecular, linear co-polyester. It is recommended for use in coil coatings as a primer for hot dip galvanized steel, and may also be used for aluminium primers and appliance finishing. In can coatings, it may be used fo...展开 DYNAPOL® L 205 is a saturated, high molecular, linear co-polyester. It is recommended for use in coil coatings as a primer for hot dip galvanized steel, and may also be used for aluminium primers and appliance finishing. In can coatings, it may be used for metal decorating enamels and interior can coatings. 收起
Request Sample DYNAPOL® L 206 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® L 205 is a saturated, high molecular, linear co-polyester. It is recommended for use in can coatings for foil primers and printing inks, and may also be use in heat sealing lacquers. In coil coatings, this product may be suitable for appliance fi...展开 DYNAPOL® L 205 is a saturated, high molecular, linear co-polyester. It is recommended for use in can coatings for foil primers and printing inks, and may also be use in heat sealing lacquers. In coil coatings, this product may be suitable for appliance finishing. 收起
Request Sample DYNAPOL® L 208 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® L 208 is a saturated, high molecular, branched co-polyester. It is recommended for use in coil coating applications such as primers for hot dip galvanized steel and hot laminating adhesives. This product may also be suitable for can coating appli...展开 DYNAPOL® L 208 is a saturated, high molecular, branched co-polyester. It is recommended for use in coil coating applications such as primers for hot dip galvanized steel and hot laminating adhesives. This product may also be suitable for can coating applications like foil primers and printing inks. 收起
Request Sample DYNAPOL® L 210 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® L 210 is a saturated, high molecular, linear co-polyester. It is recommended for use in coil coatings for hot laminating adhesives. In can coatings, it is recommended for foil primers and printing inks, and may also be used for heat sealing lacqu...展开 DYNAPOL® L 210 is a saturated, high molecular, linear co-polyester. It is recommended for use in coil coatings for hot laminating adhesives. In can coatings, it is recommended for foil primers and printing inks, and may also be used for heat sealing lacquers. 收起
Request Sample DYNAPOL® L 323 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® L 323 is a saturated, high molecular, linear co-polyester. It is recommended for use in can coating applications such as adhesion promoters. This product may also be suitable for metal decorating enamels, foil primers, printing inks, and heat sea...展开 DYNAPOL® L 323 is a saturated, high molecular, linear co-polyester. It is recommended for use in can coating applications such as adhesion promoters. This product may also be suitable for metal decorating enamels, foil primers, printing inks, and heat sealing lacquers. 收起
Request Sample DYNAPOL® L 411 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® L 411 is a saturated, high molecular, linear co-polyester. It is recommended for use in coil coatings in primers for hot dip galvanized steel, primers for aluminium, hot laminating adhesives, and elastification resins, as well as in can coatings ...展开 DYNAPOL® L 411 is a saturated, high molecular, linear co-polyester. It is recommended for use in coil coatings in primers for hot dip galvanized steel, primers for aluminium, hot laminating adhesives, and elastification resins, as well as in can coatings such as metal decorating enamels, interior can coatings, foil primers and printing inks, and heat sealing lacquers. This product may also be used for appliance finishing and adhesion promoters. 收起
Request Sample DYNAPOL® L 490 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® L 490 is a saturated, high molecular, branched co-polyester. It is recommended for use in can coatings, especially for metal decorating enamels, tube-and aerosol can coatings, and interior can coatings. This product may also be used for elastific...展开 DYNAPOL® L 490 is a saturated, high molecular, branched co-polyester. It is recommended for use in can coatings, especially for metal decorating enamels, tube-and aerosol can coatings, and interior can coatings. This product may also be used for elastification resins and adhesion promoters. 收起
Request Sample DYNAPOL® L 651 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® L 651 is a saturated, high molecular, linear co-polyester. It is recommended for use in can coatings, especially for interior can coatings and adhesion promoters. It may also be used for metal decorating enamels and heat sealing lacquers.
Request Sample DYNAPOL® L 658 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® L 658 is a saturated, high molecular, branched co-polyester. It is recommended for use in can coating applications such as interior can coatings. This product may also be suitable for metal decorating enamels.
Request Sample DYNAPOL® L 850 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® L 850 is a saturated, high molecular, linear co-polyester. It is recommended for use in coil coating applications such as elastification resins. This product is also recommended for tube-and aerosol can coatings, and may be suitable for metal dec...展开 DYNAPOL® L 850 is a saturated, high molecular, linear co-polyester. It is recommended for use in coil coating applications such as elastification resins. This product is also recommended for tube-and aerosol can coatings, and may be suitable for metal decorating enamels. 收起
Request Sample DYNAPOL® L 907 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® L 907 is a saturated, high molecular, linear co-polyester. It is recommended for use in interior can coating applications. This product may also be used for metal decorating enamels.
Request Sample DYNAPOL® L 912 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® L 912 is a saturated, high molecular, linear co-polyester. It is recommended for use in interior can coatings, and may also be used for metal decorating enamels.
Request Sample DYNAPOL® L 914 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® L 914 is a saturated, high molecular, linear co-polyester. It is recommended for use in interior can coating applications. This product may also be used for metal decorating enamels.
Request Sample DYNAPOL® L 952 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® L 952 is a saturated, high molecular, linear co-polyester. In coil coatings, it is recommended for appliance finishing applications, and may also be used for primers for hot dip galvanized steel. This product is also recommended for interior can ...展开 DYNAPOL® L 952 is a saturated, high molecular, linear co-polyester. In coil coatings, it is recommended for appliance finishing applications, and may also be used for primers for hot dip galvanized steel. This product is also recommended for interior can coatings and may be suitable for metal decorating enamels. 收起
Request Sample DYNAPOL® LH 318-02 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® LH 318-02 is a saturated, medium molecular, linear, hydroxylated co-polyester resin. It is recommended for can coatings such as interior can coatings. This product may also be suitable for primers for metal decorating enamels.
Request Sample DYNAPOL® LH 538-02 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® LH 538-02 is a saturated, medium molecular, branched, hydroxylated co-polyester resin. It is recommended for coil coating applications, especially exterior architecture, appliance finishing, and traffic applications.
Request Sample DYNAPOL® LH 724-24 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® LH 724-24 is a saturated, medium molecular, branched, hydroxylated co-polyester resin. It is recommended for coil coating applications, especially exterior and interior architecture. This product may also be suitable for appliance finishing and t...展开 DYNAPOL® LH 724-24 is a saturated, medium molecular, branched, hydroxylated co-polyester resin. It is recommended for coil coating applications, especially exterior and interior architecture. This product may also be suitable for appliance finishing and traffic uses. 收起
Request Sample DYNAPOL® LH 727-02 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® LH 727-02 is a saturated, medium molecular, branched, hydroxylated co-polyester resin. It is recommended for coil coating applications, especially for back coatings.
Request Sample DYNAPOL® LH 744-23 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® LH 744-23 is a saturated, medium molecular, branched, hydroxylated co-polyester resin. It is recommended for coil coating applications, especially for exterior architecture.
Request Sample DYNAPOL® LH 773-01 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® LH 773-01 is a saturated, medium molecular, branched, hydroxylated co-polyester resin. It is recommended for can coating applications, especially metal decorating enamels and tube- and aerosol can coatings.
Request Sample DYNAPOL® LH 775-52 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® LH 775-52 is a saturated, medium molecular, branched, hydroxylated co-polyester resin. It is recommended for can coating applications, especially metal decorating enamels. It may also be used for tube and aerosol can coatings.
Request Sample DYNAPOL® LH 815-05 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® LH 815-05 is a saturated, medium molecular, linear, hydroxylated co-polyester resin. It is recommended for can coatings such as metal decorating enamels, interior can coatings, and tube and aerosol can coatings. This product may also be suitable ...展开 DYNAPOL® LH 815-05 is a saturated, medium molecular, linear, hydroxylated co-polyester resin. It is recommended for can coatings such as metal decorating enamels, interior can coatings, and tube and aerosol can coatings. This product may also be suitable for coil coating applications such as primers for hot dip galvanized steel and primers for aluminium. 收起
Request Sample DYNAPOL® LH 818-05 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® LH 818-05 is a saturated, medium molecular, linear, hydroxylated co-polyester resin. It is recommended for can coatings such as metal decorating enamels. This product is also recommended for many coil coating applications, including interior arch...展开 DYNAPOL® LH 818-05 is a saturated, medium molecular, linear, hydroxylated co-polyester resin. It is recommended for can coatings such as metal decorating enamels. This product is also recommended for many coil coating applications, including interior architecture, appliance finishing, and aluminium primers. It may also be suitable for primers for hot dip galvanized steel. 收起
Request Sample DYNAPOL® LH 820-16 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® LH 820-16 is a saturated, medium molecular, linear, hydroxylated co-polyester resin. It is recommended for coil coatings such as primers for hot dip galvanized steel. This product may also be suitable for appliance finishing applications.
Request Sample DYNAPOL® LH 822-01 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® LH 822-01 is a saturated, medium molecular, linear, hydroxylated co-polyester resin. It is recommended for coil coating applications such as interior architecture and for traffic uses. This product may also be suitable for appliance finishing app...展开 DYNAPOL® LH 822-01 is a saturated, medium molecular, linear, hydroxylated co-polyester resin. It is recommended for coil coating applications such as interior architecture and for traffic uses. This product may also be suitable for appliance finishing applications. 收起
Request Sample DYNAPOL® LH 823-01 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® LH 823-01 is a saturated, medium molecular, branched, hydroxylated co-polyester resin. It is recommended for can coating applications, especially for tube and aerosol can coatings. This product may also be suitable for metal decorating enamels.
Request Sample DYNAPOL® LH 824-16 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® LH 824-16 is a saturated, medium molecular, linear, hydroxylated co-polyester resin. It is recommended for coil coatings such as primers for hot dip galvanized steel. This product may also be suitable for appliance finishing applications.
Request Sample DYNAPOL® LH 826-05/A Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® LH 826-05/A is a saturated, medium molecular, linear, hydroxylated co-polyester resin. It is recommended for can coatings such as metal decorating enamels, and coil coatings such as interior architecture. This product may be suitable for other co...展开 DYNAPOL® LH 826-05/A is a saturated, medium molecular, linear, hydroxylated co-polyester resin. It is recommended for can coatings such as metal decorating enamels, and coil coatings such as interior architecture. This product may be suitable for other coil coating applications, such as appliance finishing, primers for hot dip galvanized steel, and primers for aluminium. 收起
Request Sample DYNAPOL® LH 828-24 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® LH 828-24 is a saturated, medium molecular, linear, hydroxylated co-polyester resin. It is recommended for coil coatings such as interior architecture and back coatings. This product may also be suitable for exterior architecture and traffic uses...展开 DYNAPOL® LH 828-24 is a saturated, medium molecular, linear, hydroxylated co-polyester resin. It is recommended for coil coatings such as interior architecture and back coatings. This product may also be suitable for exterior architecture and traffic uses. 收起
Request Sample DYNAPOL® LH 830-02 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® LH 830-02 is a saturated, medium molecular, branched, hydroxylated co-polyester resin. It is recommended for can coating applications, especially metal decorating enamels and tube- and aerosol can coatings. This product is also recommended for co...展开 DYNAPOL® LH 830-02 is a saturated, medium molecular, branched, hydroxylated co-polyester resin. It is recommended for can coating applications, especially metal decorating enamels and tube- and aerosol can coatings. This product is also recommended for coil coating applications such as exterior and interior architecture, appliance finishing, and traffic uses. 收起
Request Sample DYNAPOL® LH 831-24 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® LH 831-24 is a saturated, medium molecular, linear, hydroxylated co-polyester resin. It is recommended for coil coating applications such as interior and exterior architecture, and also for traffic uses and primers for aluminium. This product may...展开 DYNAPOL® LH 831-24 is a saturated, medium molecular, linear, hydroxylated co-polyester resin. It is recommended for coil coating applications such as interior and exterior architecture, and also for traffic uses and primers for aluminium. This product may also be suitable for can coating applications such as metal decorating enamels. 收起
Request Sample DYNAPOL® LH 832-02 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® LH 832-02 is a saturated, medium molecular, branched, hydroxylated co-polyester resin. It is recommended for coil coating applications, especially exterior and interior architecture, appliance finishing, and traffic uses.
Request Sample DYNAPOL® LH 833-03 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® LH 833-03 is a saturated, medium molecular, branched, hydroxylated co-polyester resin. It is recommended for coil coating applications, especially primers for hot dip galvanized steel and primers for aluminium. It may also be suitable for applian...展开 DYNAPOL® LH 833-03 is a saturated, medium molecular, branched, hydroxylated co-polyester resin. It is recommended for coil coating applications, especially primers for hot dip galvanized steel and primers for aluminium. It may also be suitable for appliance finishing and for metal decorating enamels. 收起
Request Sample DYNAPOL® LH 834-02 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® LH 834-02 is a saturated, medium molecular, linear, hydroxylated co-polyester resin. It is recommended for coil coatings such as interior and exterior architecture. This product may also be suitable for appliance finishing applications.
Request Sample DYNAPOL® LH 838-02 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® LH 838-02 is a saturated, medium molecular, linear, hydroxylated co-polyester resin. It is recommended for coil coatings such as interior and exterior architecture. This product may also be suitable for traffic uses and for can coating applicatio...展开 DYNAPOL® LH 838-02 is a saturated, medium molecular, linear, hydroxylated co-polyester resin. It is recommended for coil coatings such as interior and exterior architecture. This product may also be suitable for traffic uses and for can coating applications like metal decorating enamels. 收起
Request Sample DYNAPOL® LH 874-26 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® LH 874-26 is a saturated, medium molecular, linear, hydroxylated co-polyester resin. It is recommended for coil coatings such as interior architecture. This product may also be suitable for appliance finishing and for back coatings.
Request Sample DYNAPOL® LH 898-14 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® LH 898-14 is a saturated, medium molecular, linear, hydroxylated co-polyester resin. It is recommended for coil coatings such as interior and exterior architecture. This product may also be suitable for traffic uses.
Request Sample DYNAPOL® LS 4131-10 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® LS 4131-10 is a saturated, medium molecular, linear, highly elastified, hydroxylated co-polyester resin. It is recommended for coil coatings for traffic uses and for can coatings such as foil primers and printing inks. Other can coating applicati...展开 DYNAPOL® LS 4131-10 is a saturated, medium molecular, linear, highly elastified, hydroxylated co-polyester resin. It is recommended for coil coatings for traffic uses and for can coatings such as foil primers and printing inks. Other can coating applications for this product may include adhesion promoters and heat sealing lacquers. 收起
Request Sample DYNAPOL® LS 415-10 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® LS 415-10 is a saturated, medium molecular, linear, highly elastified, co-polyester resin. It is recommended for can coating applications such as interior can coatings, foil primers, and printing inks. This product may also be suitable for coil c...展开 DYNAPOL® LS 415-10 is a saturated, medium molecular, linear, highly elastified, co-polyester resin. It is recommended for can coating applications such as interior can coatings, foil primers, and printing inks. This product may also be suitable for coil coating applications like interior architecture and appliance finishing. 收起
Request Sample DYNAPOL® LS 436-12 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® LS 436-12 is a saturated, medium molecular, linear, highly elastified, hydroxylated co-polyester resin. It is recommended for coil coating applications such as interior and exterior architecture. This product may also be suitable for can coatings...展开 DYNAPOL® LS 436-12 is a saturated, medium molecular, linear, highly elastified, hydroxylated co-polyester resin. It is recommended for coil coating applications such as interior and exterior architecture. This product may also be suitable for can coatings, including heat sealing lacquers. 收起
Request Sample DYNAPOL® LS 615 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® LS 615 is a saturated, medium molecular, linear, highly elastified, hydroxylated co-polyester resin. It is recommended for can coating applications, especially for foil primers, printing inks, and heat sealing lacquers.
Request Sample DYNAPOL® P 1500 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® P 1500 is a saturated, high molecular, semi-crystallin, linear co-polyester resin. It is recommended for thermoplastic applications.
Request Sample DYNAPOL® S 1510 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® S 1510 is a saturated, high molecular, semi-crystallin, linear co-polyester resin. It is recommended for thermoplastic applications.
Request Sample DYNAPOL® Terra 125 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® Terra 125 is a saturated, medium molecular, linear, highly elastified, hydroxylated co-polyester resin. It is recommended for can coating applications such as lacquers for aluminium foils and interior can coatings. It is also recommended for coil...展开 DYNAPOL® Terra 125 is a saturated, medium molecular, linear, highly elastified, hydroxylated co-polyester resin. It is recommended for can coating applications such as lacquers for aluminium foils and interior can coatings. It is also recommended for coil coatings such as exterior and interior architecture, and may also be suitable for appliance finishing applications. 收起
Request Sample DYNAPOL® Terra 127-03 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® Terra 125 is a saturated, medium molecular, linear, hydroxylated co-polyester resin. It is recommended for can coating applications such as lacquers for aluminium foils and interior can coatings. It is also recommended for coil coatings such as e...展开 DYNAPOL® Terra 125 is a saturated, medium molecular, linear, hydroxylated co-polyester resin. It is recommended for can coating applications such as lacquers for aluminium foils and interior can coatings. It is also recommended for coil coatings such as exterior and interior architecture, and may also be suitable for primers for hot dip galvanized steel and primers for aluminium. 收起
Request Sample DYNAPOL® UB 1052-03 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins 热固化单组分聚氨酯体系。用于PUR瓷漆烤漆的PUR体系。封闭型单组分聚酯-聚氨酯体系。
Request Sample DYNAPOL® UB 1173-03 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins 热固化单组分聚氨酯体系。用于PUR瓷漆烤漆的PUR体系。封闭型单组分聚酯-聚氨酯体系。
Request Sample DYNAPOL® UB 1174-27 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® UB 1174-27 is a blocked one pack polyester-polyurethane system. It is recommended for coil coating applications such as exterior architecture. This product may also be suitable for traffic uses and for industrial coatings.
Request Sample DYNAPOL® UB 1256-06 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins 热固化单组分体系。用于瓷漆烤漆的PUR体系。封端单组分聚酯-聚氨酯体系。
Request Sample DYNAPOL® UB 41-05 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® UB 41-05 is a blocked one pack polyester-polyurethane system. It is recommended for can coating applications such as metal decorating enamels. This product may also be suitable for coil coatings, such as interior architecture, appliance finishing...展开 DYNAPOL® UB 41-05 is a blocked one pack polyester-polyurethane system. It is recommended for can coating applications such as metal decorating enamels. This product may also be suitable for coil coatings, such as interior architecture, appliance finishing, and primers for aluminium. 收起
Request Sample DYNAPOL® UB 790-03 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins 热固化单组分聚氨酯体系。用于PUR瓷漆烤漆的PUR体系。封闭型单组分聚酯-聚氨酯体系。
Request Sample DYNAPOL® UB 791-03 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins 热固化单组分聚氨酯体系。用于PUR瓷漆烤漆的PUR体系。封闭型单组分聚酯-聚氨酯体系。
Request Sample DYNAPOL® UB 877-01 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins 基于饱和低分子量羟基聚酯树脂和己内酰胺封闭聚氨酯树脂的热固化单组分聚氨酯体系。用于瓷漆烤漆的PUR体系。封闭型单组分聚酯-聚氨酯体系。
Request Sample DYNAPOL® UB 909-06 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins 聚氨酯树脂溶液。用于瓷漆烤漆的PUR体系。封闭型单组分聚酯-聚氨酯体系。
Ethyl Acetate (EA) TOP Solvent Company Limited Ethyl acetate (EA) is a neutral colorless liquid with a pleasantly fruity odor. Ethyl acetate is primarily used in the production of nitrocellulose and cellulose acetate lacquers and as a solvent in adhesives and coatings.
ExBar™ 200 Excalibar Minerals LLC ExBar™ 200 is a raw mineral material that is manufactured from natural barium sulfate ore. This product is used in many different applications such as paints, adhesives and sealants. It has a median particle size of 15.0u and an oil absorption of 9.
ExBar™ 325 Excalibar Minerals LLC ExBar™ 325 is a raw mineral material that is manufactured from natural barium sulfate ore. This product is used in many different applications such as paints, adhesives and sealants. It has a median particle size of 10.0u and an oil absorption of 10.
ExBar™ 400 Excalibar Minerals LLC ExBar™ 400 is a raw mineral material that is manufactured from natural barium sulfate ore. This product is used in many different applications such as paints, adhesives and sealants. It has a median particle size of 8.0u and an oil absorption of 12.
ExBar™ W 1 Excalibar Minerals LLC ExBar™ W 1 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 1 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 1u and an oil absorption of 15. 收起
ExBar™ W 2 Excalibar Minerals LLC ExBar™ W 2 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 2 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 2u and an oil absorption of 13. 收起
ExBar™ W 3 Excalibar Minerals LLC ExBar™ W 3 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 3 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 3u and an oil absorption of 13. 收起
ExBar™ W 325 Excalibar Minerals LLC ExBar™ W 325 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are pr...展开 ExBar™ W 325 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. 收起
ExBar™ W 4 Excalibar Minerals LLC ExBar™ W 4 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 4 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 4u and an oil absorption of 12. 收起
ExBar™ W 400 Excalibar Minerals LLC ExBar™ W 400 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are pr...展开 ExBar™ W 400 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 8u and an oil absorption of 10. 收起
ExCal® 100 Excalibar Minerals LLC ExCal® 100 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications.
ExCal® 200 Excalibar Minerals LLC ExCal® 200 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications.
ExCal® 325 Excalibar Minerals LLC ExCal® 325 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications.
ExCal® 400 Excalibar Minerals LLC ExCal® 400 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications.
ExCal® CW 100 Excalibar Minerals LLC ExCal® CW 100 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand ar...展开 ExCal® CW 100 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand are a standard. 收起
ExCal® CW 200 Excalibar Minerals LLC ExCal® CW 200 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand ar...展开 ExCal® CW 200 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand are a standard. 收起
ExCal® CW 325 Excalibar Minerals LLC ExCal® CW 325 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand ar...展开 ExCal® CW 325 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand are a standard. 收起
Isopropanol (IPA) TOP Solvent Company Limited Isopropanol (IPA) is a clear colorless water-white mobile liquid with a mild alcohol like odor. It is miscible in all proportions with water and numerous organic liquids and is solvent in many organic substances. Isopropanol is primarily to form azeotropi...展开 Isopropanol (IPA) is a clear colorless water-white mobile liquid with a mild alcohol like odor. It is miscible in all proportions with water and numerous organic liquids and is solvent in many organic substances. Isopropanol is primarily to form azeotropic mixtures with water and many organic liquids. It is used in printing inks, adhesives, paints and coatings. 收起
Methanol TOP Solvent Company Limited Methanol (MeOH) also known as Methyl Alcohol or wood spirit, is the most simple alcohol with a single carbon atom. Its many different applications include the manufacture of acetic, acid, acetic anhydride, formaldehyde, MMA. The primary use of methanol is...展开 Methanol (MeOH) also known as Methyl Alcohol or wood spirit, is the most simple alcohol with a single carbon atom. Its many different applications include the manufacture of acetic, acid, acetic anhydride, formaldehyde, MMA. The primary use of methanol is in printing inks, paints and coatings as solvents, thinners, denaturant for ethanol and producing biodiesel. 收起
Methyl Ethyl Ketone (MEK) TOP Solvent Company Limited Methyl ethyl ketone (MEK) is a colorless, low viscosity liquid with a slight odor similar to that of acetone. It is fully miscible with many organic liquids, but is limited to the miscibility with water. With natural and synthetic resins, MEK produces sol...展开 Methyl ethyl ketone (MEK) is a colorless, low viscosity liquid with a slight odor similar to that of acetone. It is fully miscible with many organic liquids, but is limited to the miscibility with water. With natural and synthetic resins, MEK produces solutions with low viscosity and high solid content. The primary use for this product is a solvent for printing inks, adhesives, paints and coatings. 收起
Methyl Isobutyl Ketone (MIBK) TOP Solvent Company Limited Methyl isobutyl ketone (MIBK) is a colorless, medium boiling liquid, with a distinguishing mild odor. It is miscible with the common solvents and diluent, but only slightly with water. MIBK is a solvent power for nitrocellulose, many natural and synthetic...展开 Methyl isobutyl ketone (MIBK) is a colorless, medium boiling liquid, with a distinguishing mild odor. It is miscible with the common solvents and diluent, but only slightly with water. MIBK is a solvent power for nitrocellulose, many natural and synthetic resins and can produce solutions of low viscosity and high solid content. The primary use for this product is a solvent for printing inks, adhesives, paints and coatings. 收起
Methylene Chloride TOP Solvent Company Limited Methylene Chloride is a clear transparent organochloride compound widely used as a solvent. This product is a neutral liquid heavier than water and non-flammable. Methylene Chloride is fully miscible with almost all organic solvents but only slightly with...展开 Methylene Chloride is a clear transparent organochloride compound widely used as a solvent. This product is a neutral liquid heavier than water and non-flammable. Methylene Chloride is fully miscible with almost all organic solvents but only slightly with water. It has solvent properties with most organic chemicals and materials. This product is primarily used as a solvent in paints and coatings. 收起
N-Butyl Acetate (BA) TOP Solvent Company Limited N-Butyl acetate (BA) is a neutral colorless liquid with a unique odor. Butyl acetate has good solvent properties, and it has good volatility, high ability to be diluted makes it one of the most important medium-volatility solvents. N-Butyl acetate is prim...展开 N-Butyl acetate (BA) is a neutral colorless liquid with a unique odor. Butyl acetate has good solvent properties, and it has good volatility, high ability to be diluted makes it one of the most important medium-volatility solvents. N-Butyl acetate is primarily used as a solvent in printing inks, adhesives, paints and coatings. 收起
S-Butyl Acetate (SBA) TOP Solvent Company Limited S-Butyl acetate (SBA) is a transparent volatile liquid with a distinguishing ester odor. It is miscible in various solvents such as alcohols, ketones, glycol ethers, aromatic hydrocarbons and aliphatic hydrocarbons. It is primarily used in the producing a...展开 S-Butyl acetate (SBA) is a transparent volatile liquid with a distinguishing ester odor. It is miscible in various solvents such as alcohols, ketones, glycol ethers, aromatic hydrocarbons and aliphatic hydrocarbons. It is primarily used in the producing and the processing of paints, coatings, printing inks, adhesives.. 收起
TOPSol 60/145 TOP Solvent Company Limited TOPSol 60/145 is a transparent liquid with a wide boiling range and is a rapidly evaporating solvent that is widely used in the rubber and related industry. It is solvent with naphtha (petroleum) and light aliphatic and is built up of n-Hexane and Toluene...展开 TOPSol 60/145 is a transparent liquid with a wide boiling range and is a rapidly evaporating solvent that is widely used in the rubber and related industry. It is solvent with naphtha (petroleum) and light aliphatic and is built up of n-Hexane and Toluene making it a highly flammable liquid. TOPSol 60/145 is primarily used as a solvent in adhesives and sealants. 收起