UL Prospector

成功!

成功保存搜索结果
Easaqua™ L 600 Vencorex Easaqua™ L 600 is a low viscosity water dispersible aliphatic polyisocyanate. It exhibits several benefits, including optimal balance between low viscosity, high NCO content and emulsification ability; excellent humidity and moisture resistance, and impro...展开 Easaqua™ L 600 is a low viscosity water dispersible aliphatic polyisocyanate. It exhibits several benefits, including optimal balance between low viscosity, high NCO content and emulsification ability; excellent humidity and moisture resistance, and improved adhesion onto a wide range of substrates. This product is a hardener for high performance, light fastening, two-pack waterborne polyurethane coatings. It is recommended for plastic coatings, metal coatings, flooring coatings, and adhesives. 收起
Easaqua™ M 501 Vencorex Easaqua™ M 501 is a water-dispersible aliphatic polyisocyanate. It does not contain any alkyl phenol ethoxylate, and shows a lower viscosity and hydrophilicity compared to Easaqua™ M 502. It is used as a hardener of two-pack waterborne high performance po...展开 Easaqua™ M 501 is a water-dispersible aliphatic polyisocyanate. It does not contain any alkyl phenol ethoxylate, and shows a lower viscosity and hydrophilicity compared to Easaqua™ M 502. It is used as a hardener of two-pack waterborne high performance polyurethane coatings on various substrates, like wood, metal and plastics. This product can also be used as a solvent-free hardener of ultra-low VOC mat clearcoats or semigloss pigmented paints. 收起
Easaqua™ M 502 Vencorex Easaqua™ M 502 is a water dispersible aliphatic polyisocyanate. It does not contain any alkylphenolethoxylate. It is the APEO free version of Easaqua™ WT 2102. This product is suggested as a hardener of two-pack waterborne high-performance polyurethane co...展开 Easaqua™ M 502 is a water dispersible aliphatic polyisocyanate. It does not contain any alkylphenolethoxylate. It is the APEO free version of Easaqua™ WT 2102. This product is suggested as a hardener of two-pack waterborne high-performance polyurethane coatings on various substrates, like metal, plastics, wood, and concrete. Easaqua™ M 502 is also suggested as a crosslinker of paint and varnish formulations with very low VOC. 收起
Easaqua™ WAT-3 Vencorex Easaqua™ WAT-3 is a water dispersible crosslinker based on aliphatic polyisocyanate (HDI homopolymer). It does not contain any alkylphenolethoxylate. It is the APEO free version of Easaqua™ WAT-1. This product is suggested as a hardener of two-pack waterb...展开 Easaqua™ WAT-3 is a water dispersible crosslinker based on aliphatic polyisocyanate (HDI homopolymer). It does not contain any alkylphenolethoxylate. It is the APEO free version of Easaqua™ WAT-1. This product is suggested as a hardener of two-pack waterborne polyurethane leather finishing topcoats for automotive, upholstery and accessory leather products as well as 3D lamination applications in the automotive and furniture industries. Easaqua™ WAT-3 is also used as a crosslinker of waterborne adhesives for shows and wood to obtain D4 classification according to EN 204. 收起
Easaqua™ WAT-4 Vencorex Easaqua™ WAT-4是一种以脂质聚异氰酸酯(HDI均聚物)为基础的在水中可分散的交联剂。它不包含任何烷基酚乙氧基化物。它是Easaqua™ WAT的不含APEO版本。这款产品用作在鞋和木头上使用的水基粘合剂的交联剂,根据EN204获得D4分类。它还推荐用作双组分水性聚氨酯皮革涂饰面漆的固化剂,用于汽车、家居装饰用品,配套皮革用品以及3D层压应用等汽车和家具行业。
Easaqua™ X D 401 Vencorex Easaqua™ X D 401 is a fast drying water-dispersible aliphatic polyisocyanate, supplied in n-butyl acetate. It does not contain any alkyl phenol ethoxylate. This product is suggested as a fast drying hardener of two-pack waterborne high-performance polyure...展开 Easaqua™ X D 401 is a fast drying water-dispersible aliphatic polyisocyanate, supplied in n-butyl acetate. It does not contain any alkyl phenol ethoxylate. This product is suggested as a fast drying hardener of two-pack waterborne high-performance polyurethane coatings on various substrates, like wood, metal, and plastics. 收起
Easaqua™ X D 803 Vencorex Easaqua™ X D 803 is a fast drying ready-to-use water-dispersible aliphatic polyisocyanate. It does not contain any alkyl phenol ethoxylate, has a low odour, and is not labelled as flammable. This product is suggested for use as a fast drying hardener of t...展开 Easaqua™ X D 803 is a fast drying ready-to-use water-dispersible aliphatic polyisocyanate. It does not contain any alkyl phenol ethoxylate, has a low odour, and is not labelled as flammable. This product is suggested for use as a fast drying hardener of two-pack waterborne high performance polyurethane coatings on various substrates, like wood, metal, and plastics. 收起
Easaqua™ X D 870 Vencorex Easaqua™ X D 870 is a ready to use product, easily dispersed in aqueous formulation. This product is ideal for onsite application : Parquet repair and concrete flooring an also recommended for a variety of industrial applications; wood and metal coatings....展开 Easaqua™ X D 870 is a ready to use product, easily dispersed in aqueous formulation. This product is ideal for onsite application : Parquet repair and concrete flooring an also recommended for a variety of industrial applications; wood and metal coatings. Easaqua™ X D 870 is a unique combination of Easaqua™ Technology and HDI/IPDI derivatives suitable to comply with European VOC emissions regulations. 收起
ExBar™ 200 Excalibar Minerals LLC ExBar™ 200 is a raw mineral material that is manufactured from natural barium sulfate ore. This product is used in many different applications such as paints, adhesives and sealants. It has a median particle size of 15.0u and an oil absorption of 9.
ExBar™ 325 Excalibar Minerals LLC ExBar™ 325 is a raw mineral material that is manufactured from natural barium sulfate ore. This product is used in many different applications such as paints, adhesives and sealants. It has a median particle size of 10.0u and an oil absorption of 10.
ExBar™ 400 Excalibar Minerals LLC ExBar™ 400 is a raw mineral material that is manufactured from natural barium sulfate ore. This product is used in many different applications such as paints, adhesives and sealants. It has a median particle size of 8.0u and an oil absorption of 12.
ExBar™ W 1 Excalibar Minerals LLC ExBar™ W 1 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 1 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 1u and an oil absorption of 15. 收起
ExBar™ W 2 Excalibar Minerals LLC ExBar™ W 2 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 2 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 2u and an oil absorption of 13. 收起
ExBar™ W 3 Excalibar Minerals LLC ExBar™ W 3 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 3 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 3u and an oil absorption of 13. 收起
ExBar™ W 325 Excalibar Minerals LLC ExBar™ W 325 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are pr...展开 ExBar™ W 325 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. 收起
ExBar™ W 4 Excalibar Minerals LLC ExBar™ W 4 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 4 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 4u and an oil absorption of 12. 收起
ExBar™ W 400 Excalibar Minerals LLC ExBar™ W 400 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are pr...展开 ExBar™ W 400 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 8u and an oil absorption of 10. 收起
ExCal® 100 Excalibar Minerals LLC ExCal® 100 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications.
ExCal® 200 Excalibar Minerals LLC ExCal® 200 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications.
ExCal® 325 Excalibar Minerals LLC ExCal® 325 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications.
ExCal® 400 Excalibar Minerals LLC ExCal® 400 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications.
ExCal® CW 100 Excalibar Minerals LLC ExCal® CW 100 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand ar...展开 ExCal® CW 100 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand are a standard. 收起
ExCal® CW 200 Excalibar Minerals LLC ExCal® CW 200 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand ar...展开 ExCal® CW 200 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand are a standard. 收起
ExCal® CW 325 Excalibar Minerals LLC ExCal® CW 325 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand ar...展开 ExCal® CW 325 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand are a standard. 收起
Hexamethylene Diisocyanate (HDI) Vencorex Hexamethylene Diisocyanate (HDI) is also known as monomeric aliphatic diisocyanate. It is used in the chemical synthesis of aliphatic polyisocyanates and polyurethanes, such as aqueous dispersible polyurethane polymers (PUD) showing exceptional weathering...展开 Hexamethylene Diisocyanate (HDI) is also known as monomeric aliphatic diisocyanate. It is used in the chemical synthesis of aliphatic polyisocyanates and polyurethanes, such as aqueous dispersible polyurethane polymers (PUD) showing exceptional weathering resistance and flexibility. 收起
Isophorone Diisocyanate (IPDI) Vencorex Isophorone Diisocyanate (IPDI) is also known as monomeric cycloaliphatic diisocyanate. It is used in the chemical synthesis of aliphatic polyisocyanates and polyurethanes, such as aqueous dispersible polyurethane polymers (PUD) showing exceptional weather...展开 Isophorone Diisocyanate (IPDI) is also known as monomeric cycloaliphatic diisocyanate. It is used in the chemical synthesis of aliphatic polyisocyanates and polyurethanes, such as aqueous dispersible polyurethane polymers (PUD) showing exceptional weathering resistance. 收起
RF 1120 A/B Resin Formulators (E.V. Roberts) RF 1120 A/B is a two-part epoxy adhesive system for bonding a wide variety of substrates. This product is thixotropic, and so can be used on vertical surfaces without excessive run out from the bond line. RF 1120 is also supplied in a one part premixed an...展开 RF 1120 A/B is a two-part epoxy adhesive system for bonding a wide variety of substrates. This product is thixotropic, and so can be used on vertical surfaces without excessive run out from the bond line. RF 1120 is also supplied in a one part premixed and frozen form. RF 1120 Blue is manufactured to MT-5-20. 收起
RF 1141 A/B Resin Formulators (E.V. Roberts) RF 1141 A/B is a two-part low-density epoxy syntactic system. It is qualified to SCGMS 58001, Type 2, Class 1 or Class 2. This product is slightly thixotropic, and so can be used on vertical surfaces without excessive run out. RF 1141 can be supplied in S...展开 RF 1141 A/B is a two-part low-density epoxy syntactic system. It is qualified to SCGMS 58001, Type 2, Class 1 or Class 2. This product is slightly thixotropic, and so can be used on vertical surfaces without excessive run out. RF 1141 can be supplied in Semkits. 收起
RF 1144 A/B Kit Resin Formulators (E.V. Roberts) RF 1144 A/B Kit is a two-part heat cured, low density, high strength, syntactic system that is formulated for continuous service at high temperatures. RF 1144 has excellent mechanical properties up to 350°F.
RF 1366 Resin Formulators (E.V. Roberts) RF 1366 is a medium viscosity standard epoxy resin designed for potting, encapsulating and filament winding. It can be used with a wide variety of curing agents to generate products with a broad range of work lives, cure conditions and mechanical properti...展开 RF 1366 is a medium viscosity standard epoxy resin designed for potting, encapsulating and filament winding. It can be used with a wide variety of curing agents to generate products with a broad range of work lives, cure conditions and mechanical properties. This system can be cured in high humidity and low temperatures and produces a hard glossy surface. RF 1366 offers very good wet out and can produce a high strength laminate. In addition, this resin can be used for coating, potting and encapsulating small electronic components and exhibits good electrical properties. 收起
RF 1386 A/B Kit Resin Formulators (E.V. Roberts) RF 1386 A/B Kit is a two-part, thixotropic, high strength epoxy adhesive system designed for use in food packaging and water filtration applications and meets the requirements of provision 21 CFR 175.105. The raw materials used in RF 1386 are listed for u...展开 RF 1386 A/B Kit is a two-part, thixotropic, high strength epoxy adhesive system designed for use in food packaging and water filtration applications and meets the requirements of provision 21 CFR 175.105. The raw materials used in RF 1386 are listed for use in “Food Packaging Adhesive” applications and are classified as FDA Approved under the same provision. It has excellent wet out and can easily penetrate fibrous substrates. RF 1386 has exceptional adhesive strength to a wide variety of substrates, including membranes, separators and other material used in reverse osmosis. 收起
RF 1392 A/B Resin Formulators (E.V. Roberts) RF 1392 A/B is a medium fast curing toughened epoxy adhesive system for bonding a wide variety of substrates. This product is slightly thixotropic, and so can be used on vertical surfaces without excessive run out from the bond line. RF 1392 A/B has excel...展开 RF 1392 A/B is a medium fast curing toughened epoxy adhesive system for bonding a wide variety of substrates. This product is slightly thixotropic, and so can be used on vertical surfaces without excessive run out from the bond line. RF 1392 A/B has excellent adhesion to metal and plastic substrates as well as excellent water soak and environmental resistance. 收起
RF 1393 A/B Resin Formulators (E.V. Roberts) RF 1393 A/B is a medium fast curing toughened epoxy adhesive system for bonding a wide variety of substrates. This product is slightly thixotropic, and so can be used on vertical surfaces without excessive run out from the bond line. RF 1393 A/B has excel...展开 RF 1393 A/B is a medium fast curing toughened epoxy adhesive system for bonding a wide variety of substrates. This product is slightly thixotropic, and so can be used on vertical surfaces without excessive run out from the bond line. RF 1393 A/B has excellent adhesion to metal and plastic substrates as well as excellent water soak and environmental resistance. RF 1393 A/B has been used to bond Fluorocarbon sheeting to steel structures. 收起
RF 14 Resin Formulators (E.V. Roberts) RF 14 is a standard polyamine (TETA) curing agent for use with liquid epoxy resins. It provides rapid cures at ambient temperature, excellent chemical resistance and intermediate temperature resistance. Compared with DETA, it has a lower vapor pressure, i...展开 RF 14 is a standard polyamine (TETA) curing agent for use with liquid epoxy resins. It provides rapid cures at ambient temperature, excellent chemical resistance and intermediate temperature resistance. Compared with DETA, it has a lower vapor pressure, is somewhat less hygroscopic and does not carbamate as readily. 收起
RF 1591BK A/B Resin Formulators (E.V. Roberts) RF 1591BK A/B is a low viscosity potting system. This system will meet the UL 94V-0 burn test as a self-extinguishing system. RF 1591BK A/B has good thermal conductivity, chemical and thermal shock resistance. It has very good adhesion to a variety of sub...展开 RF 1591BK A/B is a low viscosity potting system. This system will meet the UL 94V-0 burn test as a self-extinguishing system. RF 1591BK A/B has good thermal conductivity, chemical and thermal shock resistance. It has very good adhesion to a variety of substrates. 收起
RF 1710 A/B Resin Formulators (E.V. Roberts) RF 1710 A/B is a two-component polyurethane rigid foam system. It was formulated to resist high temperatures. It is also CFC free. This resin system is used whenever rigid closed cell foam is needed. Applications include thermal insulation of pipes, tanks...展开 RF 1710 A/B is a two-component polyurethane rigid foam system. It was formulated to resist high temperatures. It is also CFC free. This resin system is used whenever rigid closed cell foam is needed. Applications include thermal insulation of pipes, tanks, and panels. 收起
RF 1902 (AS) A/B Kit Resin Formulators (E.V. Roberts) RF 1902 (AS) A/B Kit is a low viscosity, low density, epoxy system designed for potting and encapsulating. This product is pourable when mixed and will cure at room temperature. This system will bond to a wide variety of substrates. Castings can be machin...展开 RF 1902 (AS) A/B Kit is a low viscosity, low density, epoxy system designed for potting and encapsulating. This product is pourable when mixed and will cure at room temperature. This system will bond to a wide variety of substrates. Castings can be machined or sanded within 16 to 24 hours. 收起
RF 2388 1-Component Resin Formulators (E.V. Roberts) RF 2388 is a 1-Component anti-corrosion paste adhesive system for aluminum substrates with excellent high temperature properties.
RF 24 Resin Formulators (E.V. Roberts) RF 24 is a cycloaliphatic amine curing agent used to cure various epoxy resins at elevated temperatures. This particular curing agent offers light color, low viscosity, long pot life and high glass transition temperature (Tg). Because of its light color, ...展开 RF 24 is a cycloaliphatic amine curing agent used to cure various epoxy resins at elevated temperatures. This particular curing agent offers light color, low viscosity, long pot life and high glass transition temperature (Tg). Because of its light color, absence of staining and excellent physical properties, it is recommended has a replacement for aromatic amines. 收起
RF 2869 Mod 2 Resin Formulators (E.V. Roberts) RF 2869 Mod 2 is a one-part, silver filled, electrically conductive epoxy adhesive. This system does not require mixing or vacuum degassing. Cure is achieved at temperatures as low as 82°C (180°F) for one hour or a short dwell at 121°C (250°F) for three m...展开 RF 2869 Mod 2 is a one-part, silver filled, electrically conductive epoxy adhesive. This system does not require mixing or vacuum degassing. Cure is achieved at temperatures as low as 82°C (180°F) for one hour or a short dwell at 121°C (250°F) for three minutes. Because RF 2869 Mod 2 is already vacuum degassed during manufacturing and no mixing is required, a void free casting or bond line is easily achieved. When cured, this adhesive will have very high thermal and electrical conductive properties. 收起
RF 2969 (Mod 4) A/B Kit Resin Formulators (E.V. Roberts) RF 2969 (Mod 4) A/B Kit is a thixotropic, high strength epoxy adhesive system with good physical strength and high electrical conductivity. This material is designed where hot solder applications are impractical or on parts which cannot be subjected to h...展开 RF 2969 (Mod 4) A/B Kit is a thixotropic, high strength epoxy adhesive system with good physical strength and high electrical conductivity. This material is designed where hot solder applications are impractical or on parts which cannot be subjected to heat. RF 2969 (Mod 4) is also effective as a shielding material. Open working time is 45 minutes and full cure is achieved in 24 hours at room temperature. 收起
RF 2970 A/B Resin Formulators (E.V. Roberts) RF 2970 A/B is a thixotropic, fast setting, high strength epoxy adhesive with good physical strength and high electrical conductivity. This material is designed for applications where hot solder applications are impractical or on parts which cannot be sub...展开 RF 2970 A/B is a thixotropic, fast setting, high strength epoxy adhesive with good physical strength and high electrical conductivity. This material is designed for applications where hot solder applications are impractical or on parts which cannot be subjected to heat. 收起
RF 30 Resin Formulators (E.V. Roberts) RF 35 is a di-functional polyglycol amine curing agent used to cure various epoxy resins at elevated temperatures. This particular curing agent offers light color, low viscosity, long pot life, high elongation and excellent thermal shock resistance.
RF 3000 Resin Formulators (E.V. Roberts) RF 3000 is a modified low viscosity Bisphenol A epoxy resin. It has viscosity of 500-700 cps at 77°F.
RF 32 Resin Formulators (E.V. Roberts) RF 35 is a modified aromatic amine. It offers long pot life coupled with rapid cure response. RF 32 is non-staining and has physical properties and chemical resistances equivalent to MDA cured resins.
RF 4010 Resin Formulators (E.V. Roberts) RF 4010 is medium viscosity modified bisphenol A epoxy. It is suitable for laminating, potting and RTM applications. The diluent in RF 4010 was chosen to minimize the effect on Tg, chemical resistance and reduce skin irritation. It does not contain butyl ...展开 RF 4010 is medium viscosity modified bisphenol A epoxy. It is suitable for laminating, potting and RTM applications. The diluent in RF 4010 was chosen to minimize the effect on Tg, chemical resistance and reduce skin irritation. It does not contain butyl glycidyl ether (BGE) or cresyl glycidyl ether (CGE). The cured properties of RF 4010 will depend on the choice of hardener. 收起
RF 4407 Resin Formulators (E.V. Roberts) RF 4407 is a filled epoxy resin designed for potting or casting applications. Various curing agents can be used to achieve particular end properties. Regardless of which curing agent is used, the end product will be a thermally conductive plastic. RF 4407...展开 RF 4407 is a filled epoxy resin designed for potting or casting applications. Various curing agents can be used to achieve particular end properties. Regardless of which curing agent is used, the end product will be a thermally conductive plastic. RF 4407 can be colored with any of the RF color concentrates. RF 4407-130 is colored black, RF 4407-139 is the white version. RF 4408 is the thixotropic version of RF 4407 when a soft paste is required prior to cure. 收起
RF 46 Resin Formulators (E.V. Roberts) RF 46 is a standard, medium viscosity, polyamide resin for ambient curing of epoxy resins. It is intended as an equivalent “drop-in” for Versamid 125 and can be used without formulation changes. When mixed at stoichiometric ratios it cures to hard, durabl...展开 RF 46 is a standard, medium viscosity, polyamide resin for ambient curing of epoxy resins. It is intended as an equivalent “drop-in” for Versamid 125 and can be used without formulation changes. When mixed at stoichiometric ratios it cures to hard, durable, moisture and chemical resistant plastics. The ratios can be extended to 1:1 by weight to improve flexibility. 收起
RF 47 Resin Formulators (E.V. Roberts) RF 47 is a standard, medium viscosity, polyamide resins for ambient curing of epoxy resins. They are intended as equivalent “drop-ins” for Versamid 125 and can be used without formulation changes. When mixed at stoichiometric ratios they cure to hard, dur...展开 RF 47 is a standard, medium viscosity, polyamide resins for ambient curing of epoxy resins. They are intended as equivalent “drop-ins” for Versamid 125 and can be used without formulation changes. When mixed at stoichiometric ratios they cure to hard, durable, moisture and chemical resistant plastics. The ratios can be extended to 1:1 by weight to improve flexibility. RF 47 complies with FDA 21 CFR 175.300, 21 CFR 176.170 and 21 CFR 175.105. RF 46 is a TETA free version of RF 47. 收起
RF 5000 Resin Formulators (E.V. Roberts) RF 5000 is a standard viscosity Bisphenol A epoxy resin. It has a viscosity of 11,000-15,000 cps at 77°F.
RF 5061 A/B Kit Resin Formulators (E.V. Roberts) RF 5061 A/B Kit is a two-part, semi-thixotropic epoxy paste designed for bonding soft, semi-porous materials such as wood, ceramic or composites. RF 5061 (Mod 1) and (Mod 2) are accelerated versions of RF 5061 that reduce fixturing time. When heated to 15...展开 RF 5061 A/B Kit is a two-part, semi-thixotropic epoxy paste designed for bonding soft, semi-porous materials such as wood, ceramic or composites. RF 5061 (Mod 1) and (Mod 2) are accelerated versions of RF 5061 that reduce fixturing time. When heated to 150°F, RF 5061 (Mod 1) can be handled and machined after 15-20 minutes. 收起
RF 53 Resin Formulators (E.V. Roberts) RF 53 is a bi-cyclic anhydride that offers exceptionally long pot life and very high Tg. It cures into a highly temperature resistant plastic and it used for high temperature filament winding and RTM/VARTM applications. RF 53 requires a suitable accelerat...展开 RF 53 is a bi-cyclic anhydride that offers exceptionally long pot life and very high Tg. It cures into a highly temperature resistant plastic and it used for high temperature filament winding and RTM/VARTM applications. RF 53 requires a suitable accelerator such as RF 22 or RF 80. 收起
RF 5407 Resin Formulators (E.V. Roberts) RF 5407 is an easy-to-use, aluminum oxide, liquid epoxy resin with excellent electrical insulation properties and high thermal conductivity. RF 5407 can be cured with nearly any hardener to produce a wide range of properties and cure cycles. Several poten...展开 RF 5407 is an easy-to-use, aluminum oxide, liquid epoxy resin with excellent electrical insulation properties and high thermal conductivity. RF 5407 can be cured with nearly any hardener to produce a wide range of properties and cure cycles. Several potential curing agents are listed below. Regardless of which curing agent is selected, the resultant plastic will have low shrinkage during cure, excellent thermal stability and conductivity, and be a strong and durable casting. 收起
RF 6002 Resin Formulators (E.V. Roberts) RF 6002 is a modified Novolac epoxy resin. It offers improved Tg and chemical resistance versus standard bisphenol A epoxies. RF 6002 has a medium-low viscosity and is suitable for laminating, RTM and filament winding applications. The handling and final ...展开 RF 6002 is a modified Novolac epoxy resin. It offers improved Tg and chemical resistance versus standard bisphenol A epoxies. RF 6002 has a medium-low viscosity and is suitable for laminating, RTM and filament winding applications. The handling and final cure properties can be adjusted by the choice of curing agent. 收起
RF 61 Resin Formulators (E.V. Roberts) RF 61 is a polyamide curing agent for use with various epoxy resins. This specific curing agent is designed to add toughness and flexibility to cured epoxy resins. It has very good adhesive strength characteristics and will bond with most substrates. Diff...展开 RF 61 is a polyamide curing agent for use with various epoxy resins. This specific curing agent is designed to add toughness and flexibility to cured epoxy resins. It has very good adhesive strength characteristics and will bond with most substrates. Different mix ratios will impart varying degrees of increasing flexibility to the cured systems. A mix with RF 61 will have at least a one hour pot life under normal conditions. Cure will take place at room temperature or, in small castings or adhesives, can be accelerated with heat. 收起
RF 6100 A/B Kit Resin Formulators (E.V. Roberts) RF 6100 A/B Kit is a medium viscosity, high temperature epoxy adhesive system for bonding metal and composite structures. RF 6100 has an open pot life of four hours and cures in one hour at 200°F.
RF 62 Resin Formulators (E.V. Roberts) RF 62 is a standard, high viscosity, polyamide resin for ambient curing of epoxy resins. It is intended as an equivalent “drop-in” for Versamid 115 and can be used without formulation changes. When mixed at stoichiometric ratio it cures to a tough, durabl...展开 RF 62 is a standard, high viscosity, polyamide resin for ambient curing of epoxy resins. It is intended as an equivalent “drop-in” for Versamid 115 and can be used without formulation changes. When mixed at stoichiometric ratio it cures to a tough, durable, moisture and chemical resistant plastic. RF 62 complies with FDA 21 CFR 175.300 and 21 CFR 175.105. 收起
RF 67 Resin Formulators (E.V. Roberts) RF 67 curing agent is a polyfunctional, fatty amidoamine for use in curing liquid epoxy resins. It is intended as an equivalent “drop-in” for Genamid 2000 and can be used without formulation changes. Special features of this room temperature curing agent ...展开 RF 67 curing agent is a polyfunctional, fatty amidoamine for use in curing liquid epoxy resins. It is intended as an equivalent “drop-in” for Genamid 2000 and can be used without formulation changes. Special features of this room temperature curing agent include relatively rapid cure rate, and the ability to cure in the presence of moisture. The mix ratio can be varied over a wide range to generate cured products that range from hard and rigid to soft and flexible. Appropriate applications include marine coatings, high-solids and solvent-free coatings, flooring, adhesives and laminates. It is approved for use in U.S. Navy Specification MILP-24441/Ships Coatings. 收起
RF 68 Resin Formulators (E.V. Roberts) RF 68 is a standard, low viscosity, fatty acid amidoamine resin for ambient curing of epoxy resins. It is intended as an equivalent “drop-in” for Genamid 250 and can be used without formulation changes. When mixed at stoichiometric ratio it cures to a har...展开 RF 68 is a standard, low viscosity, fatty acid amidoamine resin for ambient curing of epoxy resins. It is intended as an equivalent “drop-in” for Genamid 250 and can be used without formulation changes. When mixed at stoichiometric ratio it cures to a hard, durable, moisture and chemical resistant plastic. RF 68 is ideally suited for high solids formulations with low viscosity resins. It can be used in compliance with 21 CFR 175.300 and 21 CFR 176.170 as a component of FDA-compliant epoxy coatings, can cements and adhesives. 收起
RF 713 A/B Kit Resin Formulators (E.V. Roberts) RF 713 A/B Kit is a thixotropic epoxy adhesive system with good physical strength and high electrical conductivity. This material is designed to be used where hot solder applications are impractical or on parts which cannot be subjected to heat. RF 713 is...展开 RF 713 A/B Kit is a thixotropic epoxy adhesive system with good physical strength and high electrical conductivity. This material is designed to be used where hot solder applications are impractical or on parts which cannot be subjected to heat. RF 713 is also effective as a shielding material. 收起
RF 77 Resin Formulators (E.V. Roberts) RF 77 is a low-viscosity amine curing agent for use with liquid epoxy resins that provides rapid cure at ambient and temperatures as low as 32°F (0°C). It can also be used to accelerate other amine hardeners.
RF 81 Resin Formulators (E.V. Roberts) RF 81 is a unique low viscosity polyamide hardener. It is compatible with most epoxy resins without induction and offers a shorter gel time than standard polyamide hardeners.
RF 825 A/B Resin Formulators (E.V. Roberts) RF 825 A/B is a two component Epoxy compound used for potting electronic packages, generally with vacuum impregnation techniques. It is a high temperature resistant, low out gassing material which has been used in high voltage devices in space.
RF 9 Resin Formulators (E.V. Roberts) RF 9 is an accelerated polyamide hardener. It offers better chemical resistance and a higher service temperature than standard polyamides.
RF 912 A/B Kit Resin Formulators (E.V. Roberts) RF 912 A/B Kit is a high strength epoxy adhesive system for bonding a wide variety of substrates, including plastics. This product is thixotropic and can be used on vertical surfaces without excessive run out from the bond line. RF 912 has an open working...展开 RF 912 A/B Kit is a high strength epoxy adhesive system for bonding a wide variety of substrates, including plastics. This product is thixotropic and can be used on vertical surfaces without excessive run out from the bond line. RF 912 has an open working time of 30 to 45 minutes and will cure at room temperature. 收起
RF 913 A/B Resin Formulators (E.V. Roberts) RF 913 A/B is a toughened epoxy adhesive system for bonding a wide variety of substrates. This product is semi-thixotropic, and so can be used on vertical surfaces without excessive bleed from the bond line. RF 913 A/B has excellent adhesion to metal and ...展开 RF 913 A/B is a toughened epoxy adhesive system for bonding a wide variety of substrates. This product is semi-thixotropic, and so can be used on vertical surfaces without excessive bleed from the bond line. RF 913 A/B has excellent adhesion to metal and plastic substrates as well as excellent water soak and environmental resistance. RF 913 is available in green (blue/yellow) and black. An electrical grade is also available. 收起
RF 955 A/B Resin Formulators (E.V. Roberts) RF 955 A/B is an easy to mix, stiff paste, two-part, high strength, epoxy fairing compound. It is designed to hold up to a 1 inch peak before cure and is easily smoothed to a paintable surface. This high strength material bonds well to a wide variety of s...展开 RF 955 A/B is an easy to mix, stiff paste, two-part, high strength, epoxy fairing compound. It is designed to hold up to a 1 inch peak before cure and is easily smoothed to a paintable surface. This high strength material bonds well to a wide variety of substrates, including most metals and most rigid plastics. 收起
RF 96 Resin Formulators (E.V. Roberts) RF 96 curing agent is a modified cycloaliphatic amine designed for use with liquid epoxy resins. It also can be used to cure solid resins in solvent-based systems. RF 96 curing agent allows for cures at high humidity, low temperatures to 40 °F and underwa...展开 RF 96 curing agent is a modified cycloaliphatic amine designed for use with liquid epoxy resins. It also can be used to cure solid resins in solvent-based systems. RF 96 curing agent allows for cures at high humidity, low temperatures to 40 °F and underwater. 收起
RX 5004 A/B Kit Resin Formulators (E.V. Roberts) RX 5004 A/B Kit is a fast setting, non-slump, general purpose epoxy adhesive system for bonding a wide variety of substrates. RX 5004 sets in as little as 10 minutes with full cure in 24 hours at room temperature.
Tolonate™ D2 Vencorex Tolonate™ D2 is a blocked aliphatic polyisocyanate (HDI homopolymer), supplied at 75% solids in aromatic solvent. It is typically used as a crosslinker of hydroxylated polymers, notably polyesters and polyacrylates, to prepare heat activated one-component...展开 Tolonate™ D2 is a blocked aliphatic polyisocyanate (HDI homopolymer), supplied at 75% solids in aromatic solvent. It is typically used as a crosslinker of hydroxylated polymers, notably polyesters and polyacrylates, to prepare heat activated one-component polyurethane systems for weatherable coatings. It gives excellent mechanical properties in conjunction with outstanding resistance to solvents, abrasion and chemical products. This product is commonly used in Automotive OEM formulations, can and coil coatings and other general industrial coatings on metal. 收起
Tolonate™ HDB Vencorex Tolonate™ HDB is a viscous solvent-free aliphatic polyisocyanate based on Hexamethylene Diisocyanate biuret (HDI homopolymer). It is suggested for use in two-component polyurethane coatings and varnishes and as an intermediate for prepolymer synthesis. Th...展开 Tolonate™ HDB is a viscous solvent-free aliphatic polyisocyanate based on Hexamethylene Diisocyanate biuret (HDI homopolymer). It is suggested for use in two-component polyurethane coatings and varnishes and as an intermediate for prepolymer synthesis. This product is also recommended for exterior protective coatings for car repair, general industrial, plastics, and wood. 收起
Tolonate™ HDB 75 B Vencorex Tolonate™ HDB 75 B is an aliphatic polyisocyanate biuret (HDI homopolymer) supplied at 75% solids in butyl acetate. This is an aromatic solvent free cariation of Tolonate™ HDB 75 MX. It is suggested for use in conventional two-component polyester/alkyd ur...展开 Tolonate™ HDB 75 B is an aliphatic polyisocyanate biuret (HDI homopolymer) supplied at 75% solids in butyl acetate. This is an aromatic solvent free cariation of Tolonate™ HDB 75 MX. It is suggested for use in conventional two-component polyester/alkyd urethanes and polyurethane coatings with no aromatic solvents. This product is also recommended for weatherable protective coatings for industrial maintenance and auto refinish applications. 收起
Tolonate™ HDB 75 BX Vencorex Tolonate™ HDB 75 BX is an aliphatic polyisocyanate biuret (HDI homopolymer), supplied at 75% solids in a blend of butyl acetate and xylene. It is used for conventional two component polyester/alkyd urethanes and topcoats for transportation and metallic it...展开 Tolonate™ HDB 75 BX is an aliphatic polyisocyanate biuret (HDI homopolymer), supplied at 75% solids in a blend of butyl acetate and xylene. It is used for conventional two component polyester/alkyd urethanes and topcoats for transportation and metallic items. This product is also recommended for weatherable protective coatings for industrial maintenance and auto refinish applications. 收起
Tolonate™ HDB 75 M Vencorex Tolonate™ HDB 75 M is an aliphatic polyisocyanate biuret (HDI homopolymer) supplied at 75% solids in methoxypropyl acetate. It is used for conventional two component polyester/alkyd urethanes and polyurethane coatings with no aromatic solvents. This produ...展开 Tolonate™ HDB 75 M is an aliphatic polyisocyanate biuret (HDI homopolymer) supplied at 75% solids in methoxypropyl acetate. It is used for conventional two component polyester/alkyd urethanes and polyurethane coatings with no aromatic solvents. This product is also recommended for high durability protective coatings for industrial maintenance and auto refinish applications. 收起
Tolonate™ HDB 75 MX Vencorex Tolonate™ HDB 75 MX is an aliphatic polyisocyanate biuret (HDI homopolymer) supplied at 75% solids in a blend of methoxypropyl acetate and xylene. It is used for conventional two component polyester/alkyd urethanes and topcoats for transportation and meta...展开 Tolonate™ HDB 75 MX is an aliphatic polyisocyanate biuret (HDI homopolymer) supplied at 75% solids in a blend of methoxypropyl acetate and xylene. It is used for conventional two component polyester/alkyd urethanes and topcoats for transportation and metallic devices. This product is also recommended for high durability protective coatings for industrial maintenance. 收起
Tolonate™ HDB-LV Vencorex Tolonate™ HDB-LV is a low viscosity solvent-free aliphatic polyisocyanate based on Hexamethylene Diisocyanate biuret (HDI homopolymer). It is used for high solids two-component polyurethane coatings and varnishes, solvent-free polyurethane systems, and as...展开 Tolonate™ HDB-LV is a low viscosity solvent-free aliphatic polyisocyanate based on Hexamethylene Diisocyanate biuret (HDI homopolymer). It is used for high solids two-component polyurethane coatings and varnishes, solvent-free polyurethane systems, and as an intermediate for prepolymer synthesis. This product is also recommended for exterior protective coatings for car repair, general industrial, plastic, and wood applications. 收起
Tolonate™ HDT Vencorex Tolonate™ HDT is a medium viscosity, solvent-free aliphatic polyisocyanate based on Hexamethylene Diisocyanate trimer (HDI homopolymer). It is used for high solids two-component polyurethane coatings and varnishes. This product is also suggested for exter...展开 Tolonate™ HDT is a medium viscosity, solvent-free aliphatic polyisocyanate based on Hexamethylene Diisocyanate trimer (HDI homopolymer). It is used for high solids two-component polyurethane coatings and varnishes. This product is also suggested for exterior protective coatings for automotive, industrial machinery, plastic parts and car repair. 收起
Tolonate™ HDT 90 Vencorex Tolonate™ HDT 90 is an aliphatic polyisocyanate based on Hexamethylene Diisocyanate trimer (HDI homopolymer) supplied at 90% solids in a blend of butyl acetate and aromatic hydrocarbon. It is used for high solids two-component polyurethane coatings and va...展开 Tolonate™ HDT 90 is an aliphatic polyisocyanate based on Hexamethylene Diisocyanate trimer (HDI homopolymer) supplied at 90% solids in a blend of butyl acetate and aromatic hydrocarbon. It is used for high solids two-component polyurethane coatings and varnishes. This product is also suggested for exterior protective coatings for automotive OEM, car repair, industrial machinery, and plastic parts. 收起
Tolonate™ HDT 90 B Vencorex Tolonate™ HDT 90 B is an aliphatic polyisocyanate trimer (HDI homopolymer) supplied at 90% solids in a butyl acetate. It is used for high solids two-component polyurethane coatings and varnishes as well as aromatic solvent-free 2 K polyurethane coatings. ...展开 Tolonate™ HDT 90 B is an aliphatic polyisocyanate trimer (HDI homopolymer) supplied at 90% solids in a butyl acetate. It is used for high solids two-component polyurethane coatings and varnishes as well as aromatic solvent-free 2 K polyurethane coatings. This product is also suggested for exterior protective coatings for automotive OEM, car repair, indutrial machinery, and plastic parts. 收起
Tolonate™ HDT-LV Vencorex Tolonate™ HDT-LV is a low viscosity, solvent-free aliphatic polyisocyanate based on Hexamethylene Diisocyanate trimer (HDI homopolymer). It is used for high solids two-component polyurethane coatings and varnishes, solventfree polyurethane systems, and in...展开 Tolonate™ HDT-LV is a low viscosity, solvent-free aliphatic polyisocyanate based on Hexamethylene Diisocyanate trimer (HDI homopolymer). It is used for high solids two-component polyurethane coatings and varnishes, solventfree polyurethane systems, and intermediate for prepolymer synthesis. This product is also suggested for exterior protective coatings for automotive OEM, industrial machinery, plastic parts and car repair. 收起
Tolonate™ HDT-LV2 Vencorex Tolonate™ HDT-LV2 is a solvent-free, very low ciscosity aliphatic polyisocyanate based on Hexamethylene Diisocyanate trimer (HDI homopolymer). This product is supplied at 100% solids and is designed to reduce VOC emissions of the formulations. It is used ...展开 Tolonate™ HDT-LV2 is a solvent-free, very low ciscosity aliphatic polyisocyanate based on Hexamethylene Diisocyanate trimer (HDI homopolymer). This product is supplied at 100% solids and is designed to reduce VOC emissions of the formulations. It is used for very high solids, low VOC, two component polyurethanes coatings and varnishes. This product is also suggested for solventfree and waterborne polyurethane systems as well as polyurethane resin synthesis intermediates. 收起
Tolonate™ IDT 70 B Vencorex Tolonate™ IDT 70 B is an aliphatic polyisocyanate based on Isophorone Diisocyanate trimer (IPDI homopolymer) supplied at 70% solids in butyl acetate. It is used for two-component polyurethane coatings and varnishes, showing an excellent weathering resista...展开 Tolonate™ IDT 70 B is an aliphatic polyisocyanate based on Isophorone Diisocyanate trimer (IPDI homopolymer) supplied at 70% solids in butyl acetate. It is used for two-component polyurethane coatings and varnishes, showing an excellent weathering resistance. This product is also suitable for exterior protective coatings for automotive OEM and car repair, general industrial, plastics, and wood applications. 收起
Tolonate™ X FD 90 B Vencorex Tolonate™ X FD 90 B is a fast drying aliphatic polyisocyanate based on high functionality hexamethylene diisocyanate trimer (HDI homopolymer) supplied at 90% solids in butyl acetate. It is suggested for use as a hardener of fast drying non-yellowing two-p...展开 Tolonate™ X FD 90 B is a fast drying aliphatic polyisocyanate based on high functionality hexamethylene diisocyanate trimer (HDI homopolymer) supplied at 90% solids in butyl acetate. It is suggested for use as a hardener of fast drying non-yellowing two-pack polyurethane coatings for car repair, marine and protective, ACE and machinery, aerospace, general industry, automotive OEM and plastic parts. 收起
Tolonate™ X FLO 100 Vencorex Tolonate™ X FLO 100 is a partially bio-based, solvent-free and low viscosity aliphatic isocyanate polymer. It is particularly designed to product solvent-free polyurethane and polyurea materials and/or to reduce volatile organic compounds emissions of pol...展开 Tolonate™ X FLO 100 is a partially bio-based, solvent-free and low viscosity aliphatic isocyanate polymer. It is particularly designed to product solvent-free polyurethane and polyurea materials and/or to reduce volatile organic compounds emissions of polyurethane solvent-based formulations. 收起
YGA100-1 Nanjing Yuangang Fine Chemical Co., Ltd. YGA100-1 is a hydrogenated petroleum resin, in white granular form. This product can be used in coatings, adhesives, hot melt road marking paints, inks, and paint additives.
YGA100-2 Nanjing Yuangang Fine Chemical Co., Ltd. YGA100-2 is a hydrogenated petroleum resin, in white granular form. This product can be used in coatings, adhesives, hot melt road marking paints, inks, and paint additives.
YGA110-1 Nanjing Yuangang Fine Chemical Co., Ltd. YGA110-1 is a hydrogenated petroleum resin, in white granular form. This product can be used in coatings, adhesives, hot melt road marking paints, inks, and paint additives.
YGA110-2 Nanjing Yuangang Fine Chemical Co., Ltd. YGA110-2 is a hydrogenated petroleum resin, in white granular form. This product can be used in coatings, adhesives, hot melt road marking paints, inks, and paint additives.
YGB100-1 Nanjing Yuangang Fine Chemical Co., Ltd. YGB100-1 is a hydrogenated petroleum resin, in white granular form. This product can be used in hot melt road marking paints to increase toughness, hardness, and adhesion.
YGB100-2 Nanjing Yuangang Fine Chemical Co., Ltd. YGB100-2 is a hydrogenated petroleum resin, in white granular form. This product can be used in hot melt road marking paints to increase toughness, hardness, and adhesion.