107 Red Chrome Molybdenum | Hangzhou Tiankai (China) Enterprise Co., Ltd. | 107 Red Chrome Molybdenum is an inorganic chromium red pigment. This product appears as a red powder and has an oil absorption of 22 g/100g, and it functions as a colorant in paints and inks. | |
207 Red Chrome Molybdenum | Hangzhou Tiankai (China) Enterprise Co., Ltd. | 207 Red Chrome Molybdenum is an inorganic chromium red pigment. This product appears as a red powder and has an oil absorption of 22 g/100g, and it functions as a colorant in paints and inks. | |
307 Red Chrome Molybdenum | Hangzhou Tiankai (China) Enterprise Co., Ltd. | 307 Red Chrome Molybdenum is an inorganic chromium red pigment. This product appears as a red powder and has an oil absorption of 30 g/100g, and it functions as a colorant in paints and inks. | |
Benzidine Yellow G | Hangzhou Tiankai (China) Enterprise Co., Ltd. | Benzidine Yellow G is a diarylide aniline yellow pigment that features high transparency, high tinting and color strength, and good liquidity. This product has a density of 1.5 g/cm3 and a pH value of 6.0-7.0. It is commonly used in offset inks, water-bas...展开 Benzidine Yellow G is a diarylide aniline yellow pigment that features high transparency, high tinting and color strength, and good liquidity. This product has a density of 1.5 g/cm3 and a pH value of 6.0-7.0. It is commonly used in offset inks, water-based inks, solvent-based inks, and coatings. 收起 | |
Benzimidazolone Yellow H4G | Hangzhou Tiankai (China) Enterprise Co., Ltd. | Benzimidazolone Yellow H4G is a greenish shade yellow pigment that features high color strength, good heat stability, and warping resistance. This product has a density of 1.57 g/cm3 and a pH value of 6.5-7.5. It is commonly used in decorative paints, ind...展开 Benzimidazolone Yellow H4G is a greenish shade yellow pigment that features high color strength, good heat stability, and warping resistance. This product has a density of 1.57 g/cm3 and a pH value of 6.5-7.5. It is commonly used in decorative paints, industrial paints, and OEM paints. 收起 | |
Benzimidazolone Yellow HG | Hangzhou Tiankai (China) Enterprise Co., Ltd. | Benzimidazolone Yellow HG is a yellow disazo pigment that features good dispersability, excellent heat fastness, and high color strength. This product is commonly used in inks. | |
Benzimidazolone Yellow S3G | Hangzhou Tiankai (China) Enterprise Co., Ltd. | Benzimidazolone Yellow S3G is a greenish yellow pigment that features good heat stability, excellent light fastness, and weather fastness. This product has a density of 1.57 g/cm3 and a pH value of 6.5-7.5. It is commonly used in decorative paints, indust...展开 Benzimidazolone Yellow S3G is a greenish yellow pigment that features good heat stability, excellent light fastness, and weather fastness. This product has a density of 1.57 g/cm3 and a pH value of 6.5-7.5. It is commonly used in decorative paints, industrial paints, and powder coatings. 收起 | |
Bronze Red C | Hangzhou Tiankai (China) Enterprise Co., Ltd. | Bronze Red C is a barium salt of azo lake and yellowish red pigment that features high tinting strength, good heat resistance, and good migration fastness. This product has a water soluble matter of 2.0 and it is commonly used in ink applications. | |
Cariflex™ IR0307 KU Polymer | Kraton Polymers International Ltd. | Cariflex™ IR0307 KU Polymer is a solution polymerised polyisoprene with a high cis-1,4 content. It is supplied as a white/transparent solid bale. This product has an high molecular weight. Cariflex™ IR0307 KU Polymer is used in adhesives, coatings, and se...展开 Cariflex™ IR0307 KU Polymer is a solution polymerised polyisoprene with a high cis-1,4 content. It is supplied as a white/transparent solid bale. This product has an high molecular weight. Cariflex™ IR0307 KU Polymer is used in adhesives, coatings, and sealants. 收起 | |
Cariflex™ IR0310 KU Polymer | Kraton Polymers International Ltd. | Cariflex™ IR0310 KU Polymer is a solution polymerised polyisoprene with a high cis-1,4 content. It is supplied as a white/transparent solid bale. This product has an high molecular weight. Cariflex™ IR0310 KU Polymer is used in adhesives, coatings, and se...展开 Cariflex™ IR0310 KU Polymer is a solution polymerised polyisoprene with a high cis-1,4 content. It is supplied as a white/transparent solid bale. This product has an high molecular weight. Cariflex™ IR0310 KU Polymer is used in adhesives, coatings, and sealants. 收起 | |
Cariflex™ IR0401 BU Latex | Kraton Polymers International Ltd. | Cariflex™ IR0401 BU Latex is a water-based emulsion of an anionically polymerized polyisoprene with a high cis-1,4 content, high molecular weight, and a high linearity. This product has a light color and low levels of impurities. Cariflex™ IR0401 BU Late...展开 Cariflex™ IR0401 BU Latex is a water-based emulsion of an anionically polymerized polyisoprene with a high cis-1,4 content, high molecular weight, and a high linearity. This product has a light color and low levels of impurities. Cariflex™ IR0401 BU Latex is used in adhesives, coatings, and sealants. 收起 | |
Cariflex™ IR0401 SU Latex | Kraton Polymers International Ltd. | Cariflex™ IR0401 SU Latex is a water-based emulsion of an anionically polymerized polyisoprene with a high cis-1,4 content, high molecular weight and a high linearity. This product has a light color and low levels of impurities. Cariflex™ IR0401 SU Latex ...展开 Cariflex™ IR0401 SU Latex is a water-based emulsion of an anionically polymerized polyisoprene with a high cis-1,4 content, high molecular weight and a high linearity. This product has a light color and low levels of impurities. Cariflex™ IR0401 SU Latex is used in adhesives, coatings, and sealants. 收起 | |
Cyanine Blue BGNCF | Hangzhou Tiankai (China) Enterprise Co., Ltd. | Cyanine Blue BGNCF is a bright greenish blue pigment that features strong color strength. This product has a density of 1.6 g/cm3 and a pH value of 6-8, and it is commonly used in inks and coatings. | |
Cyanine Blue BGS | Hangzhou Tiankai (China) Enterprise Co., Ltd. | Cyanine Blue BGS is a bright blue pigment with low viscosity and good fluidity. This product has a density of 1.5-1.6 g/cm3 and a pH value of 5.5-8.0, and it is commonly used in offset inks and solvent-based inks. | |
Cyanine Blue BS | Hangzhou Tiankai (China) Enterprise Co., Ltd. | Cyanine Blue BS is a high strength reddish blue pigment that has great liquidity. This product has a density of 1.5 g/cm3 and a pH value of 6.5-7.5, and it finds application in water-based inks and textile printing. | |
Deep Chrome Yellow | Hangzhou Tiankai (China) Enterprise Co., Ltd. | Deep Chrome Yellow is an inorganic chromium yellow pigment. This product appears as a dark yellow powder and has a relative tinting strength of 95%, and it functions as a colorant in paints and inks. | |
Diarylide Yellow AAMX/AAOT | Hangzhou Tiankai (China) Enterprise Co., Ltd. | Diarylide Yellow AAMX/AAOT is a yellow pigment that has strong coloring powder, good heat resistance, low viscosity, and good light permanency. This product has a density of 1.32 g/cm3 and a pH value of 6.0-7.0, and it is commonly used in offset inks. | |
Fast Blue B | Hangzhou Tiankai (China) Enterprise Co., Ltd. | Fast Blue B is a brilliant blue powder pigment with strong color strength. This product has a density of 1.7 g/cm3 and a pH value of 7-9, and it is commonly used in inks and coatings. | |
Fast Blue Lake BO | Hangzhou Tiankai (China) Enterprise Co., Ltd. | Fast Blue Lake BO is a high transparent, bright reddish blue pigment featuring heat and alkali resistance. This product has a density of 1.6 g/cm3, a pH value of 7-8, and finds application in offset and water-based inks. | |
Fast Blue Toner 2R | Hangzhou Tiankai (China) Enterprise Co., Ltd. | Fast Blue Toner 2R is a bright reddish blue pigment featuring good heat and alkali resistance. This product has a density of 1.6 g/cm3 and a pH value of 7-8, and it is commonly used in offset inks, water-based inks, and solvent-based inks. | |
Fast Blue Toner BR | Hangzhou Tiankai (China) Enterprise Co., Ltd. | Fast Blue Toner BR is a reddish blue pigment with good heat and alkali resistance and high transparency. This product has a density of 1.8 g/cm3 and a pH of 7-8. It finds application in solvent-based inks, offset inks, and water-based inks. | |
Fast Green 7 | Hangzhou Tiankai (China) Enterprise Co., Ltd. | Fast Green 7 is a bluish or yellowish pigment that features good dispersibility, fluidity, and strong color strength. This product has a density of 1.8 g/cm3 and a pH value of 6.5-7.5, and it is commonly used in offset inks, solvent-based inks, and water-...展开 Fast Green 7 is a bluish or yellowish pigment that features good dispersibility, fluidity, and strong color strength. This product has a density of 1.8 g/cm3 and a pH value of 6.5-7.5, and it is commonly used in offset inks, solvent-based inks, and water-based inks. 收起 | |
Fast Pink Lake | Hangzhou Tiankai (China) Enterprise Co., Ltd. | Fast Pink Lake is a red pigment with a bluish shade and features high strength and good performance in water-based inks. This product has a density of 1.5 g/cm3 and a pH value of 6.5-7.5. It is commonly used in solvent-based inks and offset inks. | |
Fast Pink Toner | Hangzhou Tiankai (China) Enterprise Co., Ltd. | Fast Pink Toner is a red pigment that is commonly used in offset inks, water-based inks, solvent-based inks. | |
Fast Red 169 | Hangzhou Tiankai (China) Enterprise Co., Ltd. | Fast Red 169 is a red pigment with a bluish shade that has good performance in water-based inks. This product has a density of 1.6 g/cm3 and a pH value of 7.0-8.0, and it is commonly used in offset inks. | |
Fast Red 176 | Hangzhou Tiankai (China) Enterprise Co., Ltd. | Fast Red 176 is a red pigment with a bluish shade that has good performance in water-based inks. This product has a density of 1.45 g/cm3 and a pH value of 5.5. It is commonly used in offset inks, solvent-based inks, and water-based paints. | |
Fast Red 177 | Hangzhou Tiankai (China) Enterprise Co., Ltd. | Fast Red 177 is a red pigment that has good performance in water-based inks. This product has a density of 1.488 g/cm3 and a pH value of 7.0-7.2. It is commonly used in offset inks, solvent-based inks, and water-based paints. | |
Fast Red 185 | Hangzhou Tiankai (China) Enterprise Co., Ltd. | Fast Red 185 is a red pigment with a bluish shade that has good performance in water-based inks. This product has a density of 1.45 g/cm3 and a pH value of 6.5, and it is commonly used in solvent-based inks. | |
Fast Red 202 | Hangzhou Tiankai (China) Enterprise Co., Ltd. | Fast Red 202 is a red pigment with a bluish shade that has good performance in water-based inks. This product has a density of 1.51-1.71 g/cm3 and a pH value of 3.0-6.0, and it is commonly used in solvent-based inks. | |
Fast Red 254 | Hangzhou Tiankai (China) Enterprise Co., Ltd. | Fast Red 254 is a red pigment that has outstanding fastness properties and medium opacity. This product has a density of 1.5 g/cm3 and a pH value of 6.5-7.5, and it is commonly used in paints and coatings. | |
Fast Red 2R | Hangzhou Tiankai (China) Enterprise Co., Ltd. | Fast Red 2R is a red pigment with a yellow shade that has strong color strength, great liquidity, and high transparency. This product has a density of 1.5 g/cm3 and a pH value of 6.5-7.5, and it is commonly used in offset inks and water-based inks. | |
Fast Red 48:2 TBBXL | Hangzhou Tiankai (China) Enterprise Co., Ltd. | Fast Red 48:2 TBBXL is a red pigment that has high transparency and good resistance to solvents. This product has a density of 1.8 g/cm3 and a pH value of 7.0-8.0, and it is commonly used in solvent-based inks. | |
Fast Red BBM | Hangzhou Tiankai (China) Enterprise Co., Ltd. | Fast Red BBM is a red manganese salt 2B pigment with very good resistance to light and solvents. This product has a density of 1.8 g/cm3 and a pH value of 7.0-8.0, and it is commonly used in industrial paints and water-based decorative paints. | |
Fast Red BBN | Hangzhou Tiankai (China) Enterprise Co., Ltd. | Fast Red BBN is a yellowish red powder pigment with strong coloring strength and high transparency. This product has a density of 1.8 g/cm3 and a pH value of 7.0-8.0, and it is commonly used in paints and coatings. | |
Fast Red BBS | Hangzhou Tiankai (China) Enterprise Co., Ltd. | Fast Red BBS is a red pigment that has high transparency and good resistance to solvents. This product has a density of 1.8 g/cm3 and a pH value of 7.0-8.0, and it is commonly used in industrial paints and water-based decorative paints. | |
Fast Red F2RK | Hangzhou Tiankai (China) Enterprise Co., Ltd. | Fast Red F2RK is a red pigment with a yellowish shade that has good performance in water-based paints. This product has a density of 1.47-2.20 g/cm3 and a pH value of 6.0, and it is commonly used in solvent-based paints. | |
Fast Red F3RK | Hangzhou Tiankai (China) Enterprise Co., Ltd. | Fast Red F3RK is a red pigment with a yellowish shade that has good performance in water-based inks. This product has a density of 1.25-1.36 g/cm3 and a pH value of 6.5-7.5. It is commonly used in offset inks, solvent-based inks, and water-based paints. | |
Fast Red F4R | Hangzhou Tiankai (China) Enterprise Co., Ltd. | Fast Red F4R is a red pigment that has strong color strength, great liquidity, and high transparency. This product has a density of 1.5 g/cm3 and a pH value of 6.5-7.5, and it is commonly used in water-based inks. | |
Fast Red F5RK | Hangzhou Tiankai (China) Enterprise Co., Ltd. | Fast Red F5RK is a red pigment with a bluish shade that has good performance in water-based inks. This product has a density of 1.25-1.36 g/cm3 and a pH value of 6.5-7.5. It is commonly used in offset inks, solvent-based inks, and water-based paints. | |
Fast Red FBB | Hangzhou Tiankai (China) Enterprise Co., Ltd. | Fast Red FBB is a pink red pigment with a bluish shade that has good performance in water-based inks. This product has a density of 1.6 g/cm3 and a pH value of 7.0-8.0, and it is commonly used in ink applications. | |
Fast Red HR | Hangzhou Tiankai (China) Enterprise Co., Ltd. | Fast Red HR is a red pigment with a bluish shade that has good migration resistance. This product has a density of 1.6 g/cm3 and a pH value of 7.0-8.0. It is commonly used in water-based inks and solvent-based inks. | |
Fast Red N | Hangzhou Tiankai (China) Enterprise Co., Ltd. | Fast Red N is a semi-transparent, bright scarlet pigment with a yellowish shade and good light fastness. This product has a density of 1.5 g/cm3 and a pH value of 6.0-7.0, and it is commonly used in water-based inks. | |
Fast Violet 1 Lake | Hangzhou Tiankai (China) Enterprise Co., Ltd. | Fast Violet 1 Lake is a reddish shade violet pigment that has good dispersibility and good fluidity. This product has a density of 1.8 g/cm3 and a pH value of 7.0-8.0. It is commonly used in offset inks, solvent-based inks, and water-based paints. | |
Fast Violet 1 Toner | Hangzhou Tiankai (China) Enterprise Co., Ltd. | Fast Violet 1 Toner is a reddish shade violet pigment powder that has good dispersibility and good fluidity. This product has a density of 1.8 g/cm3 and a pH value of 7.0-8.0. It is commonly used in offset inks, solvent-based inks, and water-based paints. | |
Fast Violet 19 | Hangzhou Tiankai (China) Enterprise Co., Ltd. | Fast Violet 19 is a bright violet pigment that has a density of 1.6 g/cm3 and a pH value of 7.0-8.0. This product is commonly used in offset inks, solvent-based inks, and water-based paints. | |
Fast Violet 19 T2R | Hangzhou Tiankai (China) Enterprise Co., Ltd. | Fast Violet 19 T2R is a violet pigment with a blue shade that has high temperature resistance. This product has a density of 1.6 g/cm3 and a pH value of 7.0-8.0. It is commonly used in inks and coatings. | |
Fast Violet 19 T3R | Hangzhou Tiankai (China) Enterprise Co., Ltd. | Fast Violet 19 T3R is a reddish shade violet pigment that has high temperature resistance. This product has a density of 1.6 g/cm3 and a pH value of 7.0-8.0. It is commonly used in inks and coatings. | |
Fast Violet 19 T5R | Hangzhou Tiankai (China) Enterprise Co., Ltd. | Fast Violet 19 T5R is a reddish shade violet pigment that has high temperature resistance. This product has a density of 1.6 g/cm3 and a pH value of 7.0-8.0. It is commonly used in inks and coatings. | |
Fast Violet 2 Toner | Hangzhou Tiankai (China) Enterprise Co., Ltd. | Fast Violet 2 Toner is a reddish shade violet pigment powder that has good dispersibility and good fluidity. This product has a density of 1.7 g/cm3 and a pH value of 6.0. It is commonly used in offset inks, solvent-based inks, and water-based inks. | |
Fast Violet 23 (Bluish) | Hangzhou Tiankai (China) Enterprise Co., Ltd. | Fast Violet 23 (Bluish) is a bluish violet pigment that has high color strength, good light fastness, and good weather fastness. This product has a density of 1.5 g/cm3 and a pH value of 6.0-7.0, and is commonly used in solvent-based inks. | |
Fast Violet 23 (Reddish) | Hangzhou Tiankai (China) Enterprise Co., Ltd. | Fast Violet 23 (Reddish) is a reddish violet pigment that has high color strength, good light fastness, and good weather fastness. This product has a density of 1.5 g/cm3 and a pH value of 6.0-7.0, and is commonly used in solvent-based inks. | |
Fast Violet 3 Lake | Hangzhou Tiankai (China) Enterprise Co., Ltd. | Fast Violet 3 Lake is a reddish shade violet pigment powder that has a density of 1.6 g/cm3 and a pH value of 7.0-8.0. This product is commonly used in offset inks, solvent-based inks, and water-based paints. | |
Fast Violet 3 Toner | Hangzhou Tiankai (China) Enterprise Co., Ltd. | Fast Violet 3 Toner is a reddish shade violet pigment powder that has good dispersibility and good fluidity. This product has a density of 1.6 g/cm3 and a pH value of 7.0-8.0. It is commonly used in offset inks, solvent-based inks, and water-based inks. | |
Fast Yellow 10G | Hangzhou Tiankai (China) Enterprise Co., Ltd. | Fast Yellow 10G is a greenish shade yellow pigment that has a density of 1.6 g/cm3 and a pH value of 6.0-7.0. This product is commonly used in industrial paints and water-based decorative paints. | |
Fast Yellow 3G | Hangzhou Tiankai (China) Enterprise Co., Ltd. | Fast Yellow 3G is a greenish shade yellow pigment that has a density of 1.6 g/cm3 and a pH value of 6.0-7.0. This product is commonly used in industrial paints and water-based decorative paints. | |
Fast Yellow G | Hangzhou Tiankai (China) Enterprise Co., Ltd. | Fast Yellow G is an aryl amide yellow pigment that has good weather resistance. This product has a density of 1.6 g/cm3 and a pH value of 6.0-7.0, and it is commonly used in industrial paints and decorative paints. | |
Hydroxypropyl Methyl Cellulose | Hangzhou Tiankai (China) Enterprise Co., Ltd. | Hydroxypropyl Methyl Cellulose is a white to yellowish powder that is used as a thickener, emulsifier, film-former, binder, and dispersing agent. This product is commonly used in paints. | |
KRATON® D1101 AIM Polymer | Kraton Polymers International Ltd. | KRATON® D1101 AIM Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as a powder dusted with calcium carbonate for supply to the North American market. This product is versatile with a ...展开 KRATON® D1101 AIM Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as a powder dusted with calcium carbonate for supply to the North American market. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1101 AIM Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, road and pipe coatings, and sealants. 收起 | |
KRATON® D1101 AS Polymer | Kraton Polymers International Ltd. | KRATON® D1101 AS Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as a porous pellet dusted with amorphous silica. This product is versatile with a combination of high strength, wide ...展开 KRATON® D1101 AS Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as a porous pellet dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1101 AS Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, road and pipe coatings, and sealants. 收起 | |
KRATON® D1101 ASM Polymer | Kraton Polymers International Ltd. | KRATON® D1101 ASM Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as a powder dusted with amorphous silica. This product is versatile with a combination of high strength, wide range ...展开 KRATON® D1101 ASM Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as a powder dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1101 ASM Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, road and pipe coatings, and sealants. 收起 | |
KRATON® D1101 AT Polymer | Kraton Polymers International Ltd. | KRATON® D1101 AT Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of hard...展开 KRATON® D1101 AT Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1101 AT Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, road and pipe coatings, and sealants. 收起 | |
KRATON® D1101 AU Polymer | Kraton Polymers International Ltd. | KRATON® D1101 AU Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as a porous pellet, undusted. This product is versatile with a combination of high strength, wide range of hardness, ...展开 KRATON® D1101 AU Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as a porous pellet, undusted. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1101 AU Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, road and pipe coatings, and sealants. 收起 | |
KRATON® D1101 ES Polymer | Kraton Polymers International Ltd. | KRATON® D1101 ES Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide r...展开 KRATON® D1101 ES Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1101 ES Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, road and pipe coating, adhesives, and sealants. 收起 | |
KRATON® D1101 ESM Polymer | Kraton Polymers International Ltd. | KRATON® D1101 ESM Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as powder dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of...展开 KRATON® D1101 ESM Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as powder dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1101 ESM Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, road and pipe coating, adhesives, and sealants. 收起 | |
KRATON® D1101 ET Polymer | Kraton Polymers International Ltd. | KRATON® D1101 ET Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of hard...展开 KRATON® D1101 ET Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1101 ET Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, road and pipe coating, and sealants. 收起 | |
KRATON® D1101 JO Polymer | Kraton Polymers International Ltd. | KRATON® D1101 JO Polymer is a clear, linear triblock copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied as a crumb dusted with organic dusting agent. This product is versatile with a combination of high strength, wi...展开 KRATON® D1101 JO Polymer is a clear, linear triblock copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied as a crumb dusted with organic dusting agent. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1101 JO Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, sealants, and coatings. 收起 | |
KRATON® D1101 JSM Polymer | Kraton Polymers International Ltd. | KRATON® D1101 JSM Polymer is a clear, linear triblock copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied as a powder dusted with amorphous silica. This product is versatile with a combination of high strength, wide ...展开 KRATON® D1101 JSM Polymer is a clear, linear triblock copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied as a powder dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1101 JSM Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, sealants, and coatings. 收起 | |
KRATON® D1101 JU Polymer | Kraton Polymers International Ltd. | KRATON® D1101 JU Polymer is a clear, linear triblock copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied as a undusted crumb. This product is versatile with a combination of high strength, wide range of hardness, and...展开 KRATON® D1101 JU Polymer is a clear, linear triblock copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied as a undusted crumb. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1101 JU Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, sealants, and coatings. 收起 | |
KRATON® D1102 JS Polymer | Kraton Polymers International Ltd. | KRATON® D1102 JS Polymer is a clear linear block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide ra...展开 KRATON® D1102 JS Polymer is a clear linear block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1102 JS Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, sealants, and coatings. 收起 | |
KRATON® D1102 JSZ Polymer | Kraton Polymers International Ltd. | KRATON® D1102 JSZ Polymer is a clear linear block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide r...展开 KRATON® D1102 JSZ Polymer is a clear linear block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1102 JSZ Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, sealants, and coatings. 收起 | |
KRATON® D1111 KT Polymer | Kraton Polymers International Ltd. | KRATON® D1111 KT Polymer is a linear triblock copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied as dusted porous pellets. This product is versatile with a combination of high strength, low hardness, and low viscosi...展开 KRATON® D1111 KT Polymer is a linear triblock copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied as dusted porous pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1111 KT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
KRATON® D1111 KU Polymer | Kraton Polymers International Ltd. | KRATON® D1111 KU Polymer is a linear triblock copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied as non-dusted porous pellets. This product is versatile with a combination of high strength, low hardness, and low vis...展开 KRATON® D1111 KU Polymer is a linear triblock copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied as non-dusted porous pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1111 KU Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
KRATON® D1113 BT Polymer | Kraton Polymers International Ltd. | KRATON® D1113 BT Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 16%. It is supplied as dusted pellets. This product is versatile with a combination of high strength, low hardness, and low viscosit...展开 KRATON® D1113 BT Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 16%. It is supplied as dusted pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1113 BT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
KRATON® D1113 PT Polymer | Kraton Polymers International Ltd. | KRATON® D1113 PT Polymer is a clear, linear block copolymer based on styrene and isoprene with a polystyrene content of 16%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low visco...展开 KRATON® D1113 PT Polymer is a clear, linear block copolymer based on styrene and isoprene with a polystyrene content of 16%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1113 PT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
KRATON® D1114 BT Polymer | Kraton Polymers International Ltd. | KRATON® D1114 BT Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 19%. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, low hardness,...展开 KRATON® D1114 BT Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 19%. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1114 BT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
KRATON® D1114 PSM Polymer | Kraton Polymers International Ltd. | KRATON® D1114 PSM Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 19%. It is supplied as powder dusted with silica. This product is versatile with a combination of high strength, low hardness, and ...展开 KRATON® D1114 PSM Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 19%. It is supplied as powder dusted with silica. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1114 PSM Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
KRATON® D1114 PT Polymer | Kraton Polymers International Ltd. | KRATON® D1114 PT Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 19%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low vi...展开 KRATON® D1114 PT Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 19%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1114 PT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
KRATON® D1116 ES Polymer | Kraton Polymers International Ltd. | KRATON® D1116 ES Polymer is a clear, radial triblock copolymer based on styrene and butadiene with a polystyrene content of 23%. It is supplied as a porous pellet dusted with an amorphous silica. This product is versatile with a combination of high streng...展开 KRATON® D1116 ES Polymer is a clear, radial triblock copolymer based on styrene and butadiene with a polystyrene content of 23%. It is supplied as a porous pellet dusted with an amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1116 ES Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, sealants, and coatings. 收起 | |
KRATON® D1116 ESM Polymer | Kraton Polymers International Ltd. | KRATON® D1116 ESM Polymer is a clear, radial triblock copolymer based on styrene and butadiene with a polystyrene content of 23%. It is supplied as a powder dusted with an amorphous silica. This product is versatile with a combination of high strength, wi...展开 KRATON® D1116 ESM Polymer is a clear, radial triblock copolymer based on styrene and butadiene with a polystyrene content of 23%. It is supplied as a powder dusted with an amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1116 ESM Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, sealants, and coatings. 收起 | |
KRATON® D1117 PT Polymer | Kraton Polymers International Ltd. | KRATON® D1117 PT Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 17%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low vi...展开 KRATON® D1117 PT Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 17%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1117 PT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
KRATON® D1118 AS Polymer | Kraton Polymers International Ltd. | KRATON® D1118 AS Polymer is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide ran...展开 KRATON® D1118 AS Polymer is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1118 AS Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, sealants, and coatings. 收起 | |
KRATON® D1118 ASM Polymer | Kraton Polymers International Ltd. | KRATON® D1118 ASM Polymer is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as powder dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of h...展开 KRATON® D1118 ASM Polymer is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as powder dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1118 ASM Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, sealants, and coatings. 收起 | |
KRATON® D1118 AT Polymer | Kraton Polymers International Ltd. | KRATON® D1118 AT Polymer is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of hardne...展开 KRATON® D1118 AT Polymer is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1118 AT Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, sealants, and coatings. 收起 | |
KRATON® D1118 BT Polymer | Kraton Polymers International Ltd. | KRATON® D1118 BT Polymer is a clear, linear triblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range o...展开 KRATON® D1118 BT Polymer is a clear, linear triblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1118 BT Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
KRATON® D1118 ES Polymer | Kraton Polymers International Ltd. | KRATON® D1118 ES Polymer is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide ran...展开 KRATON® D1118 ES Polymer is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1118 ES Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
KRATON® D1118 ESM Polymer | Kraton Polymers International Ltd. | KRATON® D1118 ESM Polymer is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as powder dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of h...展开 KRATON® D1118 ESM Polymer is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as powder dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1118 ESM Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
KRATON® D1118 ET Polymer | Kraton Polymers International Ltd. | KRATON® D1118 ET Polymer is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of hardne...展开 KRATON® D1118 ET Polymer is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1118 ET Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
KRATON® D1118 ETM Polymer | Kraton Polymers International Ltd. | KRATON® D1118 ETM Polymer is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as powder dusted with talc. This product is versatile with a combination of high strength, wide range of hardness, and...展开 KRATON® D1118 ETM Polymer is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as powder dusted with talc. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1118 ETM Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
KRATON® D1118 KT Polymer | Kraton Polymers International Ltd. | KRATON® D1118 KT Polymer is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as dusted porous pellets. This product is versatile with a combination of high strength, wide range of hardness, and lo...展开 KRATON® D1118 KT Polymer is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as dusted porous pellets. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1118 KT Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
KRATON® D1118 KTM Polymer | Kraton Polymers International Ltd. | KRATON® D1118 KTM Polymer is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as dusted powder. This product is versatile with a combination of high strength, wide range of hardness, and low visco...展开 KRATON® D1118 KTM Polymer is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as dusted powder. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1118 KTM Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
KRATON® D1119 BT Polymer | Kraton Polymers International Ltd. | KRATON® D1119 BT Polymer is a clear, linear triblock copolymer based on styrene asnd isoprene with a polystyrene content of 22%. It is supplied as porous pellet dusted with talc. This product is versatile with a combination of high strength, low hardness,...展开 KRATON® D1119 BT Polymer is a clear, linear triblock copolymer based on styrene asnd isoprene with a polystyrene content of 22%. It is supplied as porous pellet dusted with talc. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1119 BT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
KRATON® D1119 PSM Polymer | Kraton Polymers International Ltd. | KRATON® D1119 PSM Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 22%. It is supplied as powder dusted with silica. This product is versatile with a combination of high strength, low hardness, and ...展开 KRATON® D1119 PSM Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 22%. It is supplied as powder dusted with silica. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1119 PSM Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
KRATON® D1119 PT Polymer | Kraton Polymers International Ltd. | KRATON® D1119 PT Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 22%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low vi...展开 KRATON® D1119 PT Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 22%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1119 PT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
KRATON® D1124 BT Polymer | Kraton Polymers International Ltd. | KRATON® D1124 BT Polymer is a clear, branched triblock copolymer based on styrene and isoprene with a polystyrene content of 30%. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, low hardnes...展开 KRATON® D1124 BT Polymer is a clear, branched triblock copolymer based on styrene and isoprene with a polystyrene content of 30%. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1124 BT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
KRATON® D1124 PT Polymer | Kraton Polymers International Ltd. | KRATON® D1124 PT Polymer is a clear, branched copolymer based on styrene and isoprene with a polystyrene content of 30%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity...展开 KRATON® D1124 PT Polymer is a clear, branched copolymer based on styrene and isoprene with a polystyrene content of 30%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1124 PT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
KRATON® D1126 PT Polymer | Kraton Polymers International Ltd. | KRATON® D1126 PT Polymer is a clear, radial copolymer based on styrene and isoprene, with a polystyrene content of 21%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity ...展开 KRATON® D1126 PT Polymer is a clear, radial copolymer based on styrene and isoprene, with a polystyrene content of 21%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1126 PT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
KRATON® D1152 ES Polymer | Kraton Polymers International Ltd. | KRATON® D1152 ES Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 29.5% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide...展开 KRATON® D1152 ES Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 29.5% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1152 ES Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
KRATON® D1153 AS Polymer | Kraton Polymers International Ltd. | KRATON® D1153 AS Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 29.5% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide...展开 KRATON® D1153 AS Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 29.5% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1153 AS Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
KRATON® D1153 AT Polymer | Kraton Polymers International Ltd. | KRATON® D1153 AT Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 29.5% mass. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of ha...展开 KRATON® D1153 AT Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 29.5% mass. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1153 AT Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
KRATON® D1153 ES Polymer | Kraton Polymers International Ltd. | KRATON® D1153 ES Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 29.5% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide...展开 KRATON® D1153 ES Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 29.5% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1153 ES Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. 收起 |