| 99.99% Conductive Shining Flake Silver Powder | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | 99.99% Conductive Shining Flake Silver Powders are different silver powder products are chosen according to different use conditions. Low apparent density flake silver powders is the main raw material in production of conductive coating, membrane switch, ...展开 99.99% Conductive Shining Flake Silver Powders are different silver powder products are chosen according to different use conditions. Low apparent density flake silver powders is the main raw material in production of conductive coating, membrane switch, conductive inks, conductive rubber, conductive plastic, conductive ceramics.Low apparent density flake silver powder is mainly used in the low temperature electronic paste, conductive inks, conductive coatings, electromagnetic shielding coatings. the coating configurated by flake silver powder, whose liquidity and resistance to settlement is good, the coating area is large. 收起 | |
| 99.99% Conductive Silver Powder (Spherical) | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | 99.99% Conductive Silver Powder (Spherical) are widely used in electronic pastes, electronic products, electrical conductivity, electromagnetic shielding, anti-bacterial, and anti-virus applications. | |
| Acetine 51035 | Rhein Chemie Rheinau GmbH | Acetine 51035 is glycerol triacetate appearing as a clear liquid. This acetate ester functions as a solvent and plasticizer in inks and printing inks. | |
| Acetylated Distarch Ddipate | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Acetylated Distarch Ddipate has a certain ability of anti-acid and anti-alkali, anti-cutting ability, is of good viscosity. It is used it as thickening agent, premium quality stabiliser in wallpaper adhesive. | |
| Acetylated Distarch Phosphate | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Acetylated Distarch Phosphate is a fine white to off white powder with characteristic starch taste and odor. Compared with the original starch, the solubility, swelling power and transparency were significantly increased, the aging tendency was significan...展开 Acetylated Distarch Phosphate is a fine white to off white powder with characteristic starch taste and odor. Compared with the original starch, the solubility, swelling power and transparency were significantly increased, the aging tendency was significantly decreased, and the freezing stability was improved. This product is heat-resistant and acid-resistant. It is used it as thickening agent in wallpaper adhesive. 收起 | |
| Adimoll® BO | Rhein Chemie Rheinau GmbH | Adimoll® BO is a benzyl octyl adipate (BOA) suitable for polymers. Appearing as a clear liquid, this low-temperature-resistant plasticizer provides light stability and high elasticity, finding application in coatings and adhesives. | |
| Antilux® 110 | Rhein Chemie Rheinau GmbH | Antilux® 110 is a blend of selected paraffins and micro-waxes with medium-broad molecular weight distribution appearing as light blue pastilles. This wax protects rubber articles against cracking caused by ozone and weathering influences. Antilux® 110 fin...展开 Antilux® 110 is a blend of selected paraffins and micro-waxes with medium-broad molecular weight distribution appearing as light blue pastilles. This wax protects rubber articles against cracking caused by ozone and weathering influences. Antilux® 110 finds application in molded and extruded technical rubber articles, and micro cellular rubber and cable coverings used at medium-high service temperatures. 收起 | |
| Antilux® 500 | Rhein Chemie Rheinau GmbH | Antilux® 500 is a blend of selected paraffins and micro-waxes with medium-broad molecular weight distribution appearing as white to yellowish flakes. This wax protects rubber articles against cracking caused by ozone and weathering influences. Antilux® 50...展开 Antilux® 500 is a blend of selected paraffins and micro-waxes with medium-broad molecular weight distribution appearing as white to yellowish flakes. This wax protects rubber articles against cracking caused by ozone and weathering influences. Antilux® 500 finds application in molded and extruded technical rubber articles, microcellular rubber, cable jackets used at moderate temperatures. 收起 | |
| Antilux® 500 PE | Rhein Chemie Rheinau GmbH | Antilux® 500 PE is a blend of selected paraffins and micro-waxes with medium-broad molecular weight distribution with 2% low molecular polyethylene. Appearing as white to yellowish pastilles, this wax protects rubber articles against cracking caused by oz...展开 Antilux® 500 PE is a blend of selected paraffins and micro-waxes with medium-broad molecular weight distribution with 2% low molecular polyethylene. Appearing as white to yellowish pastilles, this wax protects rubber articles against cracking caused by ozone and weathering influences. Antilux® 500 PE finds application in technical molded and extruded articles, microcellular rubber, and cable coverings used at moderate temperatures. 收起 | |
| Antilux® 550 | Rhein Chemie Rheinau GmbH | Antilux® 550 is a blend of selected paraffins and micro-waxes with narrow molecular weight distribution appearing as light yellow pastilles. This wax protects rubber articles against cracking caused by ozone and weathering influences. Antilux® 550 finds a...展开 Antilux® 550 is a blend of selected paraffins and micro-waxes with narrow molecular weight distribution appearing as light yellow pastilles. This wax protects rubber articles against cracking caused by ozone and weathering influences. Antilux® 550 finds application in technical molded and extruded articles, profiles, and in microcellular rubber and cable coverings used at moderate temperatures. 收起 | |
| Antilux® 600 | Rhein Chemie Rheinau GmbH | Antilux® 600 is a blend of selected paraffins and micro-waxes with narrow molecular weight distribution appearing as light yellow pastilles. This wax protects rubber articles against cracking caused by ozone and weathering influences. Antilux® 600 finds a...展开 Antilux® 600 is a blend of selected paraffins and micro-waxes with narrow molecular weight distribution appearing as light yellow pastilles. This wax protects rubber articles against cracking caused by ozone and weathering influences. Antilux® 600 finds application in technical molded and extruded articles, and in microcellular rubber and cable coverings used at medium-high service temperatures. 收起 | |
| Antilux® 654 | Rhein Chemie Rheinau GmbH | Antilux® 654 is a blend of selected paraffins and micro-waxes with medium-broad molecular weight distribution appearing as white to yellowish pastilles. This wax protects rubber articles against cracking caused by ozone and weathering influences. Antilux®...展开 Antilux® 654 is a blend of selected paraffins and micro-waxes with medium-broad molecular weight distribution appearing as white to yellowish pastilles. This wax protects rubber articles against cracking caused by ozone and weathering influences. Antilux® 654 finds application in technical molded and extruded articles, and in tires and technical rubber articles such as conveyor belts and cable coverings used at high service temperatures. 收起 | |
| Antilux® 654 A | Rhein Chemie Rheinau GmbH | Antilux® 654 A is a blend of selected paraffins and micro-waxes with medium-broad molecular weight distribution and 2% low molecular weight polyethylene. Appearing as white to yellowish pastilles, this wax protects rubber articles against cracking caused ...展开 Antilux® 654 A is a blend of selected paraffins and micro-waxes with medium-broad molecular weight distribution and 2% low molecular weight polyethylene. Appearing as white to yellowish pastilles, this wax protects rubber articles against cracking caused by ozone and weathering influences. Antilux® 654 A finds application in technical molded and extruded articles, and in tires, conveyor belts, and cable coverings used at high service temperatures. 收起 | |
| Baymod® PU-A | Rhein Chemie Rheinau GmbH | Baymod® PU-MOD is an aliphatic polyester urethane appearing as a granule. This plasticizing polymer improves the resistance of PVC and POM to oil, grease, solvent, and abrasion. Baymod® PU-A functions as a laminating calendar coating for conveyor belts, f...展开 Baymod® PU-MOD is an aliphatic polyester urethane appearing as a granule. This plasticizing polymer improves the resistance of PVC and POM to oil, grease, solvent, and abrasion. Baymod® PU-A functions as a laminating calendar coating for conveyor belts, folding containers, clothing, upholstery, and bags and shoes. 收起 | |
| Baymod® PU-MOD | Rhein Chemie Rheinau GmbH | Baymod® PU-MOD is an aliphatic polyester urethane with a low content of PVC as a dusting agent. Appearing as a white powder, this plasticizing polymer functions as a laminating calendar coating for conveyor belts, folding containers, clothing, upholstery,...展开 Baymod® PU-MOD is an aliphatic polyester urethane with a low content of PVC as a dusting agent. Appearing as a white powder, this plasticizing polymer functions as a laminating calendar coating for conveyor belts, folding containers, clothing, upholstery, and bags and shoes. 收起 | |
| Bonding Agent 2005 | Rhein Chemie Rheinau GmbH | Bonding Agent 2005 is a formulation of an aromatic polyisocyanurate in n-butyl acetate appearing as a viscous, light yellow liquid. It is a high performance, reactive and phthalate-free one-component bonding agent. Bonding Agent 2005 is used to improve t...展开 Bonding Agent 2005 is a formulation of an aromatic polyisocyanurate in n-butyl acetate appearing as a viscous, light yellow liquid. It is a high performance, reactive and phthalate-free one-component bonding agent. Bonding Agent 2005 is used to improve the adhesion of PVC plastisol coatings to substrates made of polyester of polymaide. 收起 | |
| Bonding Agent 51030 | Rhein Chemie Rheinau GmbH | Bonding Agent 51030 is a solvent-free one-component bonding agent that appears as a yellow viscous liquid. Bonding Agent 51030 is used to improve the adhesion of PVC plastisol coatings to substrates made of polyester or polyamide. | |
| Bonding Agent 51030 N | Rhein Chemie Rheinau GmbH | Bonding Agent 51030 N is a preparation of a polyisocyanurate in di-iso-nonyl phthalate (DINP) that appears as a yellow viscous liquid. Bonding Agent 51030 N functions as a solvent-free one-component bonding agent and is used to improve the adhesion of PVC...展开 Bonding Agent 51030 N is a preparation of a polyisocyanurate in di-iso-nonyl phthalate (DINP) that appears as a yellow viscous liquid. Bonding Agent 51030 N functions as a solvent-free one-component bonding agent and is used to improve the adhesion of PVC plastisol coatings to substrates made of polyester or polyamide. 收起 | |
| Bonding Agent 51066 | Rhein Chemie Rheinau GmbH | Bonding Agent 51066 is a phthalate- and solvent-free one-component bonding agent that appears as a yellow viscous liquid. Bonding Agent 51066 is used to improve the adhesion of PVC plastisol coatings to substrates made of polyester or polyamide. | |
| Bonding Agent 51066 N | Rhein Chemie Rheinau GmbH | Bonding Agent 51066 N is a preparation of a polyisocyanurate in alkylsulphonic acid ester of phenols and polyiso-cyanurate appearing as a yellow liquid. Bonding Agent 51066 N is phthalate- and solvent-free one-component bonding agent used to improve the a...展开 Bonding Agent 51066 N is a preparation of a polyisocyanurate in alkylsulphonic acid ester of phenols and polyiso-cyanurate appearing as a yellow liquid. Bonding Agent 51066 N is phthalate- and solvent-free one-component bonding agent used to improve the adhesion of PVC plastisol coatings to substrates made of polyester or polyamide. 收起 | |
| Bonding Agent 51099 | Rhein Chemie Rheinau GmbH | Bonding Agent 51099 is a formulation of a polyisocyanurate in isononylbenzoate (INB) that appeats as a slightly yellow to yellow viscous liquid. Bonding Agent 51099 is a high performance, reactive, phthalate- and solvent-free one-component bonding agent u...展开 Bonding Agent 51099 is a formulation of a polyisocyanurate in isononylbenzoate (INB) that appeats as a slightly yellow to yellow viscous liquid. Bonding Agent 51099 is a high performance, reactive, phthalate- and solvent-free one-component bonding agent used to improve the adhesion of PVC plastisol coatings to substrates made of polyester or polyamide. 收起 | |
| Cardanol | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Cardanol is made from national cashew nut shell oil, in a high vacuum distillation and solvent extraction processes to obtain industrial cardanol, it can substitute or partial substitute for the production of high performance phenolic resin, epoxy curing ...展开 Cardanol is made from national cashew nut shell oil, in a high vacuum distillation and solvent extraction processes to obtain industrial cardanol, it can substitute or partial substitute for the production of high performance phenolic resin, epoxy curing agents, surfactants, adhesives, paints, and other products used in the manufacture of friction materials epoxy curing agent, liquid phenolic resin, liquid or powdered thermosetting phenolic resin. 收起 | |
| Disflamoll® TP | Rhein Chemie Rheinau GmbH | Disflamoll® TP is triphenyl phosphate (TPP) appearing as a white pellet. This low volatility flame retardant is commonly used in polymers and finds application in coatings based on nitrocellulose, phenolic resins, and ABS/PC and PPE/HIPS compounds. | |
| Disflamoll® TP Liquid | Rhein Chemie Rheinau GmbH | Disflamoll® TP is triphenyl phosphate (TPP) appearing as a liquid. This low volatility flame retardant is commonly used in polymers and finds application in coatings based on nitrocellulose, phenolic resins, and ABS/PC and PPE/HIPS compounds. | |
| ExBar™ 200 | Excalibar Minerals LLC | ExBar™ 200 is a raw mineral material that is manufactured from natural barium sulfate ore. This product is used in many different applications such as paints, adhesives and sealants. It has a median particle size of 15.0u and an oil absorption of 9. | |
| ExBar™ 325 | Excalibar Minerals LLC | ExBar™ 325 is a raw mineral material that is manufactured from natural barium sulfate ore. This product is used in many different applications such as paints, adhesives and sealants. It has a median particle size of 10.0u and an oil absorption of 10. | |
| ExBar™ 400 | Excalibar Minerals LLC | ExBar™ 400 is a raw mineral material that is manufactured from natural barium sulfate ore. This product is used in many different applications such as paints, adhesives and sealants. It has a median particle size of 8.0u and an oil absorption of 12. | |
| ExBar™ W 1 | Excalibar Minerals LLC | ExBar™ W 1 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 1 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 1u and an oil absorption of 15. 收起 | |
| ExBar™ W 2 | Excalibar Minerals LLC | ExBar™ W 2 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 2 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 2u and an oil absorption of 13. 收起 | |
| ExBar™ W 3 | Excalibar Minerals LLC | ExBar™ W 3 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 3 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 3u and an oil absorption of 13. 收起 | |
| ExBar™ W 325 | Excalibar Minerals LLC | ExBar™ W 325 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are pr...展开 ExBar™ W 325 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. 收起 | |
| ExBar™ W 4 | Excalibar Minerals LLC | ExBar™ W 4 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 4 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 4u and an oil absorption of 12. 收起 | |
| ExBar™ W 400 | Excalibar Minerals LLC | ExBar™ W 400 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are pr...展开 ExBar™ W 400 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 8u and an oil absorption of 10. 收起 | |
| ExCal® 100 | Excalibar Minerals LLC | ExCal® 100 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications. | |
| ExCal® 200 | Excalibar Minerals LLC | ExCal® 200 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications. | |
| ExCal® 325 | Excalibar Minerals LLC | ExCal® 325 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications. | |
| ExCal® 400 | Excalibar Minerals LLC | ExCal® 400 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications. | |
| ExCal® CW 100 | Excalibar Minerals LLC | ExCal® CW 100 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand ar...展开 ExCal® CW 100 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand are a standard. 收起 | |
| ExCal® CW 200 | Excalibar Minerals LLC | ExCal® CW 200 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand ar...展开 ExCal® CW 200 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand are a standard. 收起 | |
| ExCal® CW 325 | Excalibar Minerals LLC | ExCal® CW 325 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand ar...展开 ExCal® CW 325 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand are a standard. 收起 | |
| Fumed Silica | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Fumed silica is a high value-added fine chemical product; it is a white, loose, amorphous, non-toxic, non-polluting inorganic non-metallic oxide.The primary particle size betweens 7 ~ 40nm and the specific surface area is generally greater than 100m2 / g....展开 Fumed silica is a high value-added fine chemical product; it is a white, loose, amorphous, non-toxic, non-polluting inorganic non-metallic oxide.The primary particle size betweens 7 ~ 40nm and the specific surface area is generally greater than 100m2 / g. Because of its nano-effects, in the material the fumed silica exhibits excellent properties of reinforcing, thickening, thixotropic, insulation, matting, anti-sagging, which are widely used in the silicone rubber (polyester plastics, sealing materials,etc.), siliconeglue (adhesives,paints,coatings,etc.)and high-performance fibers, new synthetic unsaturated resin, electric insulation, inks, pharmaceuticals, paper, food, cosmetics, chemical mechanical polishing, etc., to be known as the "industrial MSG". 收起 | |
| Hydroxypropyl Aistarch Phosphate | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Hydroxypropyl Aistarch Phosphate is a fine white to off white powder with a characteristic odor. This product has good cutting resistance, good acid and alkali resistance, and high viscosity. It is used it as thickening agent in wallpaper adhesive. | |
| Industrial Grade Zinc Oxide | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Industrial Grade Zinc Oxide is a white, small grain zinc oxide used in production of products like Zinc stearate, zinc bromide, zinc borate, phosphatizing liquid, as well as used in preparation of electroplate liquid. | |
| Lonwa 5022WR | Shantou Longhua Pearl Lustre Pigments Co.,Ltd. 汕头市龙华珠光颜料有限公司 | Lonwa 5022WR is a bronze powder with a Color Index Number of (Mica):C.I.No.77019/(Fe2O3):C.I.No.77491. | |
| Lonwa Pearls 1002 Sliver White | Shantou Longhua Pearl Lustre Pigments Co.,Ltd. 汕头市龙华珠光颜料有限公司 | Lonwa Pearls 1002 Sliver White is a silver white powder with a Color Index Number of (TiO2):C.I.No.77891/(Mica):C.I.No.77019. | |
| Lonwa Pearls 1032WR Silverwhite | Shantou Longhua Pearl Lustre Pigments Co.,Ltd. 汕头市龙华珠光颜料有限公司 | Lonwa Pearls 1032WR Silverwhite is a silver white powder with a Color Index Number of (TiO2):C.I.No.77891/(Mica):C.I.No.77019/(SnO2):C.I.No.77861. | |
| Lonwa Pearls 2052 Interference Golden | Shantou Longhua Pearl Lustre Pigments Co.,Ltd. 汕头市龙华珠光颜料有限公司 | Lonwa Pearls 2052 Interference Golden is an interference color powder with a Color Index Number of (TiO2):C.I.No.77891/(Mica):C.I.No.77019/(SnO2):C.I.No.77861. | |
| Lonwa Pearls 3002 Golden Pearl | Shantou Longhua Pearl Lustre Pigments Co.,Ltd. 汕头市龙华珠光颜料有限公司 | Lonwa Pearls 3002 Golden Pearl is a golden powder with a Color Index Number of (TiO2):C.I.No.77891/(Mica):C.I.No.77019/(Fe2O3):C.I.No.77491. | |
| Mesamoll® | Rhein Chemie Rheinau GmbH | Mesamoll® is an alkylsulphonic acid ester with phenol (ASE) appearing as a slightly yellow, clear liquid. This phthalate-free general purpose plasticizer provides gelling behaviour and saponification and weather resistance. Mesamoll® finds application in ...展开 Mesamoll® is an alkylsulphonic acid ester with phenol (ASE) appearing as a slightly yellow, clear liquid. This phthalate-free general purpose plasticizer provides gelling behaviour and saponification and weather resistance. Mesamoll® finds application in one- and two-component polyurethane-based sealing and adhesive systems, in mouldable, easy-to-process sealants for filling or covering joints in structures and parts of buildings, and in coatings for air-supported structures and tents, occupational and protective clothing, rain-wear, bath mats, expanded film, floorcovering, wall paper, and imitation leather. 收起 | |
| Mesamoll® II | Rhein Chemie Rheinau GmbH | Mesamoll® I is an alkylsulphonic acid ester with phenol (ASE) appearing as a slightly yellow, clear liquid. This phthalate-free general purpose plasticizer provides gelling behaviour and saponification and weather resistance. Mesamoll® I finds applicatio...展开 Mesamoll® I is an alkylsulphonic acid ester with phenol (ASE) appearing as a slightly yellow, clear liquid. This phthalate-free general purpose plasticizer provides gelling behaviour and saponification and weather resistance. Mesamoll® I finds application in one- and two-component polyurethane-based sealing and adhesive systems, in mouldable, easy-to-process sealants for filling or covering joints in structures and parts of buildings, and in coatings for air-supported structures and tents, occupational and protective clothing, rain-wear, bath mats, expanded film, floorcovering, wall paper, and imitation leather. 收起 | |
| Methyltriethoxysilane | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Methyltriethoxysilane is an industrial grade colorless, transparent liquid. It is used as water repellent to improve fillers dispersibility and reduces their sedimentation tendency. It can also be used as an important component for sol-gel coating, silico...展开 Methyltriethoxysilane is an industrial grade colorless, transparent liquid. It is used as water repellent to improve fillers dispersibility and reduces their sedimentation tendency. It can also be used as an important component for sol-gel coating, silicone resins and silicone rubber,silicone resins and silicone rubber. 收起 | |
| Methyltrimethoxysilane | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Methyltrimethoxysilane is a colorless, low-viscosity liquid, regarded as trifunctional since all three alkoxy groups are able to participate in this reaction. Additionally it contains a methyl group that adds organic character to the products. It is mainl...展开 Methyltrimethoxysilane is a colorless, low-viscosity liquid, regarded as trifunctional since all three alkoxy groups are able to participate in this reaction. Additionally it contains a methyl group that adds organic character to the products. It is mainly used as the crosslinking agent of room temperature vulcanized silicone rubber, as well as the glass fiber surface treatment agent and reinforced plastic laminate treatment agent, in order to improve the mechanical strength of products, heat resistance, moisture resistance. 收起 | |
| Modified Starch - Compound Active Printing Paste | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Modified Starch - Compound Active Printing Paste is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological pro...展开 Modified Starch - Compound Active Printing Paste is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holding water capacity, screening, dilution resistance, alkali and salt resistance. It also overcomes the disadvantages of the traditional sodium alginate printing paste in the printing process such as the low color yield and brilliance, bad screening and short retention time of the original paste. The performance/price ratio of this paste is much higher than the sodium alginate and it is the most advanced printing paste products at present. 收起 | |
| Modified Starch - High End | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Modified Starch - High End is ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holdi...展开 Modified Starch - High End is ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holding water capacity, screening, dilution resistance, alkali and salt resistance. It also overcomes the disadvantages of the traditional sodium alginate printing paste in the printing process such as the low color yield and brilliance, bad screening and short retention time of the original paste. 收起 | |
| Modified Starch - Mid Range | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Modified Starch - Mid Range is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, ...展开 Modified Starch - Mid Range is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holding water capacity, screening, dilution resistance, alkali and salt resistance. It also overcomes the disadvantages of the traditional sodium alginate printing paste in the printing process such as the low color yield and brilliance, bad screening and short retention time of the original paste. The performance/price ratio of this paste is much higher than the sodium alginate and it is the most advanced printing paste products at present. 收起 | |
| Nano Silver Powder TFNP-30 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Nano Silver Powder TFNP-30 is a moderate tap density,high dispersion, spherical nanometer silver powder. TFNP-30 is ideal for low-temperature sintering paste, low silver content and high conductive paste, and touchscreen slurry. | |
| Nano Silver Powder TFNP-80 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Nano Silver Powder TFNP-80 is a moderate tap density, nanoscale spherical monodisperse silver. It is mainly used as an additive material. | |
| ND-22 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | ND-22 is used as cross-linking agent for RTV Silicone Rubber and reinforcing for epoxy fiber glass reinforced plastics, viscosity increaser for synthetic resin and raw stuff fabric racked agent. | |
| Polyvinyl Alcohol | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Polyvinyl alcohol is an important chemical raw materials for the manufacture of polyvinyl acetal, resistance to gasoline pipelines and vinylon synthetic fibers, fabric treatment agents, emulsifiers, paper coatings, adhesives, glues and so on. | |
| Precipitated Silica | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Precipitated silica is a relatively pure form of the mineral silica, which is produced by the chemical process known as precipitation. In chemical precipitation, a solid forms from a liquid due to a chemical reaction. Precipitated silica is formed by mixi...展开 Precipitated silica is a relatively pure form of the mineral silica, which is produced by the chemical process known as precipitation. In chemical precipitation, a solid forms from a liquid due to a chemical reaction. Precipitated silica is formed by mixing solutions of sodium silicate with sulfuric acid in water. A chemical reaction occurs, and pellets of pure silica form. 收起 | |
| PVB | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Polyvinyl butyral (PVB) with hydrochloric acid as catalyst, is made from polyvinyl alcohol and butyl aldehyde. The abbreviate is PVB. High gloss, high transparent, non-toxic, smell-less, fast dissolve, etc. It’s good soluble with pigments and dyes. The PV...展开 Polyvinyl butyral (PVB) with hydrochloric acid as catalyst, is made from polyvinyl alcohol and butyl aldehyde. The abbreviate is PVB. High gloss, high transparent, non-toxic, smell-less, fast dissolve, etc. It’s good soluble with pigments and dyes. The PVB has high transparency, good cold resistance, water resistance, film forming properties and impact resistance, widely used in middle film of glass, ceramic flower paper, metal protective paint, tipping paper, aluminum foil, insulation paint, fiber treatment agent, finished parts, printing inks, dyes and so on. 收起 | |
| Rhenogran® DOTG-70 | Rhein Chemie Rheinau GmbH | Rhenogran® DOTG-70 is 70 % N,N'-di-o-tolyl guanidine and 30% elastomer binder with dispersing agents appearing as white to grey, slightly red granules thermoplastic, fully compatible polymer binder allows quick absorption and excellent dispersion in the r...展开 Rhenogran® DOTG-70 is 70 % N,N'-di-o-tolyl guanidine and 30% elastomer binder with dispersing agents appearing as white to grey, slightly red granules thermoplastic, fully compatible polymer binder allows quick absorption and excellent dispersion in the rubber. In this way, optimal activity of the effective substance is assured. This accelerator is used for the vulcanization of natural and synthetic rubbers requiring mechanical properties and aging resistance. Rhenogran® DOTG-70 finds application in roller coverings and cable sheathing. 收起 | |
| Rhenogran® Fe-Red-70 | Rhein Chemie Rheinau GmbH | Rhenogran® Fe-Red-70 is 70 % iron (III) oxide and 30 % elastomer binder with dispersing agents appearing as red granules. This iron oxide pigment is used for coloring compounds based on natural and synthetic rubbers. Rhenogran® Fe-Red-70 finds application...展开 Rhenogran® Fe-Red-70 is 70 % iron (III) oxide and 30 % elastomer binder with dispersing agents appearing as red granules. This iron oxide pigment is used for coloring compounds based on natural and synthetic rubbers. Rhenogran® Fe-Red-70 finds application in technical rubber articles including floor coverings. 收起 | |
| Rhenogran® HEXA-80 | Rhein Chemie Rheinau GmbH | Rhenogran® HEXA-80 is 80 % hexamethylene tetramine and 20 % elastomer binder and dispersing agents appearing as beige granules. This accelerator is used for the vulcanization of natural and synthetic rubbers, and also functions as a formaldehyde donor. Rh...展开 Rhenogran® HEXA-80 is 80 % hexamethylene tetramine and 20 % elastomer binder and dispersing agents appearing as beige granules. This accelerator is used for the vulcanization of natural and synthetic rubbers, and also functions as a formaldehyde donor. Rhenogran® HEXA-80 finds application as a formaldehyde donor in resorcinol-based adhesive compounds such as carcasses of steel-cord tires, in slow-curing mixes, thick-walled articles, roller coverings, and light-colored and transparent vulcanizates. 收起 | |
| Rhenogran® HEXA-80 SBR | Rhein Chemie Rheinau GmbH | Rhenogran® HEXA-80 SBR is 80% hexamethylene tetramine and 20% elastomer binder (SBR) and dispersing agents appearing as beige granules. This accelerator is used for the vulcanization of natural and synthetic rubbers, and also functions as a formaldehyde d...展开 Rhenogran® HEXA-80 SBR is 80% hexamethylene tetramine and 20% elastomer binder (SBR) and dispersing agents appearing as beige granules. This accelerator is used for the vulcanization of natural and synthetic rubbers, and also functions as a formaldehyde donor. Rhenogran® HEXA-80 SBR finds application as a formaldehyde donor in resorcinol-based adhesive compounds such as carcasses of steel-cord tires, in slow-curing mixes, thick-walled articles, roller coverings, and light-colored and transparent vulcanizates. 收起 | |
| Rhenogran® MgO-75 | Rhein Chemie Rheinau GmbH | Rhenogran® MgO-75 is 75 % magnesium oxide and 25 % polymer binder and dispersing agents appearing as grey to white granules. This curing activator and acid acceptor finds application in polychloroprene rubber (CR) and adhesives. | |
| Rhenogran® MPTD-70 | Rhein Chemie Rheinau GmbH | Rhenogran® MPTD-70 is 70% N,N'-dimethyl-N,N'-diphenyl thiuramdisulphide and 30% elastomer binder and dispersing agents appearing as beige granules. This accelerator is used for the vulcanization of natural and synthetic rubbers and as curing agents for su...展开 Rhenogran® MPTD-70 is 70% N,N'-dimethyl-N,N'-diphenyl thiuramdisulphide and 30% elastomer binder and dispersing agents appearing as beige granules. This accelerator is used for the vulcanization of natural and synthetic rubbers and as curing agents for sulfurless and low sulfur vulcanizations requiring heat and aging resistance. Rhenogran® MPTD-70 finds application in heat resistant technical articles and cable coverings. 收起 | |
| Rhenogran® MTT-80 | Rhein Chemie Rheinau GmbH | Rhenogran® MTT-80 is 80% 3-methyl-thiazolidine-thione-2 and 20% elastomer binder and dispersing agents appearing as grey-beige granules. This vulcaniztion accelerator is used in chloroprene rubber requiring moduli and aging resistance. Rhenogran® MTT-80 f...展开 Rhenogran® MTT-80 is 80% 3-methyl-thiazolidine-thione-2 and 20% elastomer binder and dispersing agents appearing as grey-beige granules. This vulcaniztion accelerator is used in chloroprene rubber requiring moduli and aging resistance. Rhenogran® MTT-80 finds application in technical molded and extruded goods, profiles, hoses, seals, mills, cable sheathing, and conveyor belts based on CR. 收起 | |
| Rhenogran® PCD-50 EVA | Rhein Chemie Rheinau GmbH | Rhenogran® PCD-50 EVA is 50% polycarbodiimide and 50% elastomer binder (EVA) and dispersing agents appearing as white to off-white granules. This antioxidant is effective against hydrolysis for polymers containing ester groups such as ethylene vinylacetat...展开 Rhenogran® PCD-50 EVA is 50% polycarbodiimide and 50% elastomer binder (EVA) and dispersing agents appearing as white to off-white granules. This antioxidant is effective against hydrolysis for polymers containing ester groups such as ethylene vinylacetate copolymers. Rhenogran® PCD-50 EVA finds application in molded and extruded articles, cable sheathings and insulations, and fabric proofings. 收起 | |
| Rhenogran® Resorcin-80 | Rhein Chemie Rheinau GmbH | Rhenogran® Resorcin-80 is 80% resorcinol and 20% EPDM/EVA binder and dispersing agents appearing as off-white to brown granules. This direct bonding compound is used for the bonding system resorcinol formaldehyde silica and is suitable for bonding rubber ...展开 Rhenogran® Resorcin-80 is 80% resorcinol and 20% EPDM/EVA binder and dispersing agents appearing as off-white to brown granules. This direct bonding compound is used for the bonding system resorcinol formaldehyde silica and is suitable for bonding rubber to reinforcing materials such as fabrics, glass fibres, and steel cord. Rhenogran® Resorcin-80 finds application in tires and technical rubber goods such as conveyor belts, raw-edge V-belts, round belts, fire hose, other reinforced hoses, flexible containers, and fabric proofings. 收起 | |
| Rhenogran® Resorcin-80 SBR | Rhein Chemie Rheinau GmbH | Rhenogran® Resorcin-80 SBR is 80% resorcinol and 20% SBR binder and dispersing agents appearing as off-white to brown granules. This direct bonding compound is used for the bonding system resorcinol formaldehyde silica and is suitable for bonding rubber t...展开 Rhenogran® Resorcin-80 SBR is 80% resorcinol and 20% SBR binder and dispersing agents appearing as off-white to brown granules. This direct bonding compound is used for the bonding system resorcinol formaldehyde silica and is suitable for bonding rubber to reinforcing materials such as fabrics, glass fibres, and steel cord. Rhenogran® Resorcin-80 SBR finds application in tires and technical rubber goods such as conveyor belts, raw-edge V-belts, round belts, fire hose, other reinforced hoses, flexible containers, and fabric proofings. 收起 | |
| Rhenogran® TBzTD-70 | Rhein Chemie Rheinau GmbH | Rhenogran® TBzTD-70 is 70 % tetrabenzylthiuram disulfide (TBzTD) and 30 % elastomer binder and dispersing agents appearing as beige granules. This accelerator is used in natural and synthetic rubber vulcanization, and as a vulcanizing agent for sulfurless...展开 Rhenogran® TBzTD-70 is 70 % tetrabenzylthiuram disulfide (TBzTD) and 30 % elastomer binder and dispersing agents appearing as beige granules. This accelerator is used in natural and synthetic rubber vulcanization, and as a vulcanizing agent for sulfurless or low sulfur vulcanizations requiring heat and aging resistance. Rhenogran® TBzTD-70 finds application in technical and heat resistant rubber articles such as cable sheathing and insulation. 收起 | |
| Rhenogran® TMTD-70 | Rhein Chemie Rheinau GmbH | Rhenogran® TMTD-70 is 70 % tetramethylthiuram disulfide and 30 % elastomer binder with dispersing agents appearing as orange granules. This accelerator is used for the vulcanization of natural and synthetic rubbers, and as a curing agent for sulfurless or...展开 Rhenogran® TMTD-70 is 70 % tetramethylthiuram disulfide and 30 % elastomer binder with dispersing agents appearing as orange granules. This accelerator is used for the vulcanization of natural and synthetic rubbers, and as a curing agent for sulfurless or low sulfur vulcanizations requiring heat and aging resistance. Rhenogran® TMTD-70 finds application in heat resistant mechanical rubber articles, and cable coverings and insulations. 收起 | |
| SandGel B | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | SandGel B, a selectively mined, water-washed, ultrafine crushed and surface modified product, has a high swelling capacity in water and shows a marked thixotropic thickening effect. SandGel B, is supplied as a white powder with optimize purity, whiteness ...展开 SandGel B, a selectively mined, water-washed, ultrafine crushed and surface modified product, has a high swelling capacity in water and shows a marked thixotropic thickening effect. SandGel B, is supplied as a white powder with optimize purity, whiteness and is stable in diluted acids and bases and is particularly effective in acidic, neutral and alkaline systems. 收起 | |
| SandGel BL | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | SandGel BL, a selectively mined, specially processed and water-washed smectite product, has a high swelling capacity in water and shows a marked thixotropic thickening effect. SandGel BL, is supplied as a white powder with optimize purity, whiteness and i...展开 SandGel BL, a selectively mined, specially processed and water-washed smectite product, has a high swelling capacity in water and shows a marked thixotropic thickening effect. SandGel BL, is supplied as a white powder with optimize purity, whiteness and is stable in diluted acids and bases and is particularly effective in acidic, neutral and alkaline systems. 收起 | |
| SandGel BN | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | SandGel BN, a selectively mined, water-washed, ultrafine crushed and surface modified product, has a high swelling capacity in water and shows a marked thixotropic thickening effect. SandGel BN, disperses easily and hydrates rapidly, has superior suspensi...展开 SandGel BN, a selectively mined, water-washed, ultrafine crushed and surface modified product, has a high swelling capacity in water and shows a marked thixotropic thickening effect. SandGel BN, disperses easily and hydrates rapidly, has superior suspension and thixotropy, can be added as powder or blend with other ingredient in aqueous system. 收起 | |
| SandGel C | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | SandGel C, a selectively mined, water-washed, ultrafine crushed and surface modified product, has a high swelling capacity in water and shows a marked thixotropic thickening effect. SandGel C, is cellulose modified product, and has excellent anti electrol...展开 SandGel C, a selectively mined, water-washed, ultrafine crushed and surface modified product, has a high swelling capacity in water and shows a marked thixotropic thickening effect. SandGel C, is cellulose modified product, and has excellent anti electrolyte performance, water-retaining property and rheological property, can be used as thickener, thixotropy, suspending agent, adhesive, latex stabilizer, etc. 收起 | |
| SandGel HL | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | SandGel HL, a selectively mined, specially processed and water-washed smectite product, has a high swelling capacity in water and shows a marked thixotropic thickening effect. SandGel HL, has higher viscosity in low solid content and superior thixotropy, ...展开 SandGel HL, a selectively mined, specially processed and water-washed smectite product, has a high swelling capacity in water and shows a marked thixotropic thickening effect. SandGel HL, has higher viscosity in low solid content and superior thixotropy, can be used as thickener, thixotropy, suspending agent, adhesive, latex stabilizer, etc. It has the value to improve the storage stability, workability, and to prevent subsidence and drainage phenomenon. 收起 | |
| SCA-Y25E | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | SCA-Y25E (3-Isocyanatopropyltriethoxysilane) is unique isocyanate functional silane.The isocyanate functionality exhibits the typical reactivity of an alkyl isocyanate and will react with most reactive hydrogen containing compounds.The silane portion of t...展开 SCA-Y25E (3-Isocyanatopropyltriethoxysilane) is unique isocyanate functional silane.The isocyanate functionality exhibits the typical reactivity of an alkyl isocyanate and will react with most reactive hydrogen containing compounds.The silane portion of these products can then crosslink with each other or be used to adhere to a variety of substrates. SCA-Y25E can be used in a number of applications. 收起 | |
| SCA-Y25M | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | SCA-Y25M (3-Isocyanatopropyltrimethoxysilane) is a unique isocyanate functional silane.The isocyanate functionality exhibits the typical reactivity of an alkyl isocyanate and will react with most reactive hydrogen containing compounds.The silane portion o...展开 SCA-Y25M (3-Isocyanatopropyltrimethoxysilane) is a unique isocyanate functional silane.The isocyanate functionality exhibits the typical reactivity of an alkyl isocyanate and will react with most reactive hydrogen containing compounds.The silane portion of these products can then crosslink with each other or be used to adhere to a variety of substrates. It can be used in a number of applications. 收起 | |
| Silane ATPN-1100 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Silane ATPN-1100 is a versatile amino-functional coupling agent used over a broad range of applications to provide superior bonds between inorganic substrates and organic polymers. The silicon-containing portion of the molecule provides strong bonding to ...展开 Silane ATPN-1100 is a versatile amino-functional coupling agent used over a broad range of applications to provide superior bonds between inorganic substrates and organic polymers. The silicon-containing portion of the molecule provides strong bonding to substrates. The primary amine function reacts with a wide array of thermoset, thermoplastic, and elastomeric materials. 收起 | |
| Silane ATPN-1110 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Silane ATPN-1110 is an amino-functional silane that may be used over a broad range of applications to give an improvement in the bond between a substrate, filler or reinforcement and resins that react with the amino group. It can improve the dispersion an...展开 Silane ATPN-1110 is an amino-functional silane that may be used over a broad range of applications to give an improvement in the bond between a substrate, filler or reinforcement and resins that react with the amino group. It can improve the dispersion and wet ability of filler in the high molecular materials. ATPN-1110 is an excellent promoter of adhesion and sealant (such as polyurethane, epoxy, and phenol). In the glass wool and FRP products, it can be added into phenol resins to improve the wet resistance and mechanical performance. 收起 | |
| Silane ATPN-1120 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Silane ATPN-1120 is a clear, colorless, strongly alkaline liquid with smell being very sensitive to hydrolysis. The chloride content ranges in the lower ppm-level. ATPN-1120 is used as adhesion promoter at organic/inorganic interfaces, for modification of...展开 Silane ATPN-1120 is a clear, colorless, strongly alkaline liquid with smell being very sensitive to hydrolysis. The chloride content ranges in the lower ppm-level. ATPN-1120 is used as adhesion promoter at organic/inorganic interfaces, for modification of surfaces (corrosion prevention, component of primers) or silicone-polymers or as crosslinker (moisture crosslinking of polymers). The application as“coupling agent”leads in general to an improvement of mechanical and electrical product properties above all under exposure to heat and/or moisture. 收起 | |
| Silane ATPN-171 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Silane ATPN-171 is used to modify polyethylene and other polymers by grafting its vinyl group to the polymer backbone using a radical initiator, such as peroxide. This provides a polymer with pendant trimethoxysilyl groups that may be used as moisture-act...展开 Silane ATPN-171 is used to modify polyethylene and other polymers by grafting its vinyl group to the polymer backbone using a radical initiator, such as peroxide. This provides a polymer with pendant trimethoxysilyl groups that may be used as moisture-activated crosslinking sites via hydrolysis of the alkoxy groups followed by condensation of the resulting silanols. 收起 | |
| Silane ATPN-187 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Silane ATPN-187 is an epoxy-functional silane, it is a clear, light straw liquid. ATPN-187 may used as a coupling agent in polysulfide and polyurethane caulks and sealants, in mineral-filled or glass-reinforced thermosets and thermoplastics, and in glass ...展开 Silane ATPN-187 is an epoxy-functional silane, it is a clear, light straw liquid. ATPN-187 may used as a coupling agent in polysulfide and polyurethane caulks and sealants, in mineral-filled or glass-reinforced thermosets and thermoplastics, and in glass roving size-binders. It is particularly employed as an adhesion-promoting additive in waterborne systems, e.g. improving the adhesion of acrylic latex sealants. 收起 | |
| Silane Coupling Agent Si-69 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Silane Coupling Agent Si-69 is a kind of multifunctional silane coupling agent that has been used successfully in the rubber industry. It is used to improve physical and mechanical properties of vulcanizates. It is able to markedly improve tensile strengt...展开 Silane Coupling Agent Si-69 is a kind of multifunctional silane coupling agent that has been used successfully in the rubber industry. It is used to improve physical and mechanical properties of vulcanizates. It is able to markedly improve tensile strength, tearing strength and abrasive resistance and reduce compression set of vulcanizates. In addition, it can reduce the viscosity and improve the processability of rubber products. Si-69 is especially suitable to improve the reinforcing properties of fillers that contain hydroxyl groups in all unsaturated polymers having double bonds or their blends. 收起 | |
| SILICONE FLUID ATPN-100 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | SILICONE FLUID ATPN-100 is a linear, non-reactive polydimethylsiloxane with a viscosity of approx. 100 mm2 /s. Due to its chemical structure, it has an outstanding property profile, which sets it apart from organic materials such as mineral oils. SILICON...展开 SILICONE FLUID ATPN-100 is a linear, non-reactive polydimethylsiloxane with a viscosity of approx. 100 mm2 /s. Due to its chemical structure, it has an outstanding property profile, which sets it apart from organic materials such as mineral oils. SILICONE FLUID ATPN-100 is ideal for use in a wide range of applications. 收起 | |
| SILICONE FLUID ATPN-1000 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | SILICONE FLUID ATPN-1000 is a linear, non-reactive polydimethylsiloxane with a viscosity of approx. 1 000 mm2/s. Due to its chemical structure, it has an outstanding property profile, which sets it apart from organic materials such as mineral oils. SILICO...展开 SILICONE FLUID ATPN-1000 is a linear, non-reactive polydimethylsiloxane with a viscosity of approx. 1 000 mm2/s. Due to its chemical structure, it has an outstanding property profile, which sets it apart from organic materials such as mineral oils. SILICONE FLUID ATPN-1000 is ideal for use in a wide range of applications. 收起 | |
| Silver Coated Copper Powder | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Silver Coated Copper Powder has Good electrical conductivity, high electrical conductivity and it is not easy to be oxidized, it is a promising good conductive material. It is a good conductive material, it is widely used in the electronic, electromechani...展开 Silver Coated Copper Powder has Good electrical conductivity, high electrical conductivity and it is not easy to be oxidized, it is a promising good conductive material. It is a good conductive material, it is widely used in the electronic, electromechanical, communication, printing, aerospace, etc. 收起 | |
| Sulfolane Anhydrous | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Sulfolane is a colorless and tasteless solid at room temperature, melted at 27.8℃. Most industrial products are colorless and light yellow liquid. Sulfolane has high solubility property and selectivity. It is soluble in water and easily soluble in aromati...展开 Sulfolane is a colorless and tasteless solid at room temperature, melted at 27.8℃. Most industrial products are colorless and light yellow liquid. Sulfolane has high solubility property and selectivity. It is soluble in water and easily soluble in aromatics and alcohol, but has little solubility in paraffin and olefin hydrocarbon. Sulfolane has high stability with hot acid and alkali. It doesn’t react with acid, alkali, sulfur, oralcohol at room temperature, and also doesn’t decompose and polymerize. When the temperature is higher than 240℃, the sulfolane will decompose SO2. Sulfolane has stable chemical property, it will not appear polyreaction and decomposition under common condition with the existence of acid and alkali. 收起 | |
| Sulfolane Aqueous | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Sulfolane is a colorless and tasteless solid at room temperature, melted at 27.8℃. Most industrial products are colorless and light yellow liquid. Sulfolane has high solubility property and selectivity. It is soluble in water and easily soluble in aromati...展开 Sulfolane is a colorless and tasteless solid at room temperature, melted at 27.8℃. Most industrial products are colorless and light yellow liquid. Sulfolane has high solubility property and selectivity. It is soluble in water and easily soluble in aromatics and alcohol, but has little solubility in paraffin and olefin hydrocarbon. Sulfolane has high stability with hot acid and alkali. It doesn’t react with acid, alkali, sulfur, oralcohol at room temperature, and also doesn’t decompose and polymerize. When the temperature is higher than 240℃, the sulfolane will decompose SO2. Sulfolane has stable chemical property, it will not appear polyreaction and decomposition under common condition with the existence of acid and alkali. 收起 | |
| Triacetin | Rhein Chemie Rheinau GmbH | Triacetin is glycerintriacetate appearing as a clear liquid. This acetate ester functions as a plasticizer for cellulose-based paints, and as a solvent and plasticizer for inks and printing inks. | |
| Ultramoll® III | Rhein Chemie Rheinau GmbH | Ultramoll® III is an adipic acid polyester appearing as a clear, highly viscous liquid. This polymeric plasticizer provides short drying time and flexibility to hot-melt adhesives, and is used in oil-resistant protective clothing for industrial use such a...展开 Ultramoll® III is an adipic acid polyester appearing as a clear, highly viscous liquid. This polymeric plasticizer provides short drying time and flexibility to hot-melt adhesives, and is used in oil-resistant protective clothing for industrial use such as oil and petrol-resistant tarpaulins. 收起 | |
| Ultramoll® V HV | Rhein Chemie Rheinau GmbH | Ultramoll® V HV is an adipic acid polyester appearing as a clear viscous liquid. This polymeric plasticizer is commonly used in polymers to provide resistance to extraction by oil, aliphatic hydrocarbons, and water, migration-resistance when in contact wi...展开 Ultramoll® V HV is an adipic acid polyester appearing as a clear viscous liquid. This polymeric plasticizer is commonly used in polymers to provide resistance to extraction by oil, aliphatic hydrocarbons, and water, migration-resistance when in contact with other plastics and paints, lightfastness, and flexibility through prolonged exposure to elevated temperatures. Ultramoll® V HV finds application in adhesives, sealants, printing inks, calendered films, and cast films. 收起 | |
| Uniplex 108 | Rhein Chemie Rheinau GmbH | Uniplex 108 is N-Ethyl o/p-toluene sulphonamide appearing as a clear oily liquid. This plasticizer makes compounds resistant to oils, solvents, and greases while lowering the melting point and flexibility. It finds application in polyvinyl acetate adhesiv...展开 Uniplex 108 is N-Ethyl o/p-toluene sulphonamide appearing as a clear oily liquid. This plasticizer makes compounds resistant to oils, solvents, and greases while lowering the melting point and flexibility. It finds application in polyvinyl acetate adhesives for joining difficult surfaces such as metal to rubber, in hot melts for formulating book bindings and shoe adhesives, and in nitrocellulose lacquers. 收起 | |
| Uniplex 165 | Rhein Chemie Rheinau GmbH | Uniplex 165 is a clear liquid consisting of di-isobutyl adipate (DiBA). This plasticizer has low viscosity, high volatility, and is used to impart low temperature flexibility to various polymers. Uniplex 165 functions as a plasticizer in adhesives and coa...展开 Uniplex 165 is a clear liquid consisting of di-isobutyl adipate (DiBA). This plasticizer has low viscosity, high volatility, and is used to impart low temperature flexibility to various polymers. Uniplex 165 functions as a plasticizer in adhesives and coatings. 收起 | |
| Uniplex 214 | Rhein Chemie Rheinau GmbH | Uniplex 214 is N-Butylbenzenesulfonamide (N-BSA) appearing as a clear liquid with no suspended material. This liquid sulfonamide is compatible with commonly used resins and functions to enhance low-temperature flexibility. Uniplex 214 finds application in...展开 Uniplex 214 is N-Butylbenzenesulfonamide (N-BSA) appearing as a clear liquid with no suspended material. This liquid sulfonamide is compatible with commonly used resins and functions to enhance low-temperature flexibility. Uniplex 214 finds application in nylon-based hot melt adhesives and adhesives for nonwoven interlinings, fuel lines, hoses, films, and other high performance applications. 收起 | |
| Uniplex 260 | Rhein Chemie Rheinau GmbH | Uniplex 260 is a white solid consisting of glyceryl tribenzoate. This solid polyol benzoate heat-activatable plasticizer functions as a processing aid and modifier for a wide range of polymers. Uniplex 260 finds application in hot melt adhesives, in cello...展开 Uniplex 260 is a white solid consisting of glyceryl tribenzoate. This solid polyol benzoate heat-activatable plasticizer functions as a processing aid and modifier for a wide range of polymers. Uniplex 260 finds application in hot melt adhesives, in cellophane coatings to improve heat-seal properties without affecting film color and clarity, in nitrocellulose coatings, lacquers, and films requiring a moisture barrier, heat sealability, and adhesion, in printing inks and adhesives, and in metallic and pigmented surface coatings. 收起 | |
| Uniplex 262 | Rhein Chemie Rheinau GmbH | Uniplex 262 is 1,4-Cyclohexanedimethanol dibenzoate appearing as an off-white, crystalline particle, lump, or granule. This solid dibenzoate plasticizer, binder, and modifier is suitable for a wide range of polymers. Uniplex 262 is finds application in ho...展开 Uniplex 262 is 1,4-Cyclohexanedimethanol dibenzoate appearing as an off-white, crystalline particle, lump, or granule. This solid dibenzoate plasticizer, binder, and modifier is suitable for a wide range of polymers. Uniplex 262 is finds application in hot melt adhesives, pressure sensitive adhesives, heat reactive thermal delayed tack functions, and in powder coatings. 收起 | |
| Uniplex 280CG | Rhein Chemie Rheinau GmbH | Uniplex 280CG is sucrose benzoate appearing as a clear solid. This stable, odourless, and non-crystalline brittle solid has a sharp softening range, ultraviolet light stability, and is compatible with a broad range of resins, plasticizers , and solvents. ...展开 Uniplex 280CG is sucrose benzoate appearing as a clear solid. This stable, odourless, and non-crystalline brittle solid has a sharp softening range, ultraviolet light stability, and is compatible with a broad range of resins, plasticizers , and solvents. It provides high gloss, film hardness, flexibility, and water and alcohol resistance. Uniplex 280CG is used as a modifier for clear lacquers, in the formulation of clear coatings for wood, paper, and metal, in the formulation of ink systems, in ultraviolet inks and coatings, metallic and pigmented coatings, and heat seal coatings. 收起 |
