- 主页
- 油漆与涂料赛百库
- Excalibar Minerals LLC
- Nanjing Yuangang Fine Chemical Co., Ltd.
- Shantou Longhua Pearl Lustre Pigments Co.,Ltd. 汕头市龙华珠光颜料有限公司
- Zeon Corporation

ExBar™ 200 | Excalibar Minerals LLC | ExBar™ 200 is a raw mineral material that is manufactured from natural barium sulfate ore. This product is used in many different applications such as paints, adhesives and sealants. It has a median particle size of 15.0u and an oil absorption of 9. | |

ExBar™ 325 | Excalibar Minerals LLC | ExBar™ 325 is a raw mineral material that is manufactured from natural barium sulfate ore. This product is used in many different applications such as paints, adhesives and sealants. It has a median particle size of 10.0u and an oil absorption of 10. | |

ExBar™ 400 | Excalibar Minerals LLC | ExBar™ 400 is a raw mineral material that is manufactured from natural barium sulfate ore. This product is used in many different applications such as paints, adhesives and sealants. It has a median particle size of 8.0u and an oil absorption of 12. | |

ExBar™ W 1 | Excalibar Minerals LLC | ExBar™ W 1 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 1 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 1u and an oil absorption of 15. 收起 | |

ExBar™ W 2 | Excalibar Minerals LLC | ExBar™ W 2 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 2 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 2u and an oil absorption of 13. 收起 | |

ExBar™ W 3 | Excalibar Minerals LLC | ExBar™ W 3 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 3 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 3u and an oil absorption of 13. 收起 | |

ExBar™ W 325 | Excalibar Minerals LLC | ExBar™ W 325 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are pr...展开 ExBar™ W 325 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. 收起 | |

ExBar™ W 4 | Excalibar Minerals LLC | ExBar™ W 4 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 4 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 4u and an oil absorption of 12. 收起 | |

ExBar™ W 400 | Excalibar Minerals LLC | ExBar™ W 400 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are pr...展开 ExBar™ W 400 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 8u and an oil absorption of 10. 收起 | |

ExCal® 100 | Excalibar Minerals LLC | ExCal® 100 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications. | |

ExCal® 200 | Excalibar Minerals LLC | ExCal® 200 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications. | |

ExCal® 325 | Excalibar Minerals LLC | ExCal® 325 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications. | |

ExCal® 400 | Excalibar Minerals LLC | ExCal® 400 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications. | |

ExCal® CW 100 | Excalibar Minerals LLC | ExCal® CW 100 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand ar...展开 ExCal® CW 100 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand are a standard. 收起 | |

ExCal® CW 200 | Excalibar Minerals LLC | ExCal® CW 200 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand ar...展开 ExCal® CW 200 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand are a standard. 收起 | |

ExCal® CW 325 | Excalibar Minerals LLC | ExCal® CW 325 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand ar...展开 ExCal® CW 325 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand are a standard. 收起 | |

Lonwa 5022WR | Shantou Longhua Pearl Lustre Pigments Co.,Ltd. 汕头市龙华珠光颜料有限公司 | Lonwa 5022WR is a bronze powder with a Color Index Number of (Mica):C.I.No.77019/(Fe2O3):C.I.No.77491. | |

Lonwa Pearls 1002 Sliver White | Shantou Longhua Pearl Lustre Pigments Co.,Ltd. 汕头市龙华珠光颜料有限公司 | Lonwa Pearls 1002 Sliver White is a silver white powder with a Color Index Number of (TiO2):C.I.No.77891/(Mica):C.I.No.77019. | |

Lonwa Pearls 1032WR Silverwhite | Shantou Longhua Pearl Lustre Pigments Co.,Ltd. 汕头市龙华珠光颜料有限公司 | Lonwa Pearls 1032WR Silverwhite is a silver white powder with a Color Index Number of (TiO2):C.I.No.77891/(Mica):C.I.No.77019/(SnO2):C.I.No.77861. | |

Lonwa Pearls 2052 Interference Golden | Shantou Longhua Pearl Lustre Pigments Co.,Ltd. 汕头市龙华珠光颜料有限公司 | Lonwa Pearls 2052 Interference Golden is an interference color powder with a Color Index Number of (TiO2):C.I.No.77891/(Mica):C.I.No.77019/(SnO2):C.I.No.77861. | |

Lonwa Pearls 3002 Golden Pearl | Shantou Longhua Pearl Lustre Pigments Co.,Ltd. 汕头市龙华珠光颜料有限公司 | Lonwa Pearls 3002 Golden Pearl is a golden powder with a Color Index Number of (TiO2):C.I.No.77891/(Mica):C.I.No.77019/(Fe2O3):C.I.No.77491. | |

Nipol® 1001 | Zeon Corporation | Nipol® 1001 is a high nitrile rubber (NBR) that can be used in strong cements and adhesives. This product is a standard high acrylonitrile NBR for hot polymerization systems. Its specific gravity is 1.00 and it contains 40.5% bound acrylonitrile NBR. | |

Nipol® 1041 | Zeon Corporation | Nipol® 1041 is a high nitrile rubber (NBR) that can be used in strong cements and adhesives. This product is a standard high acrylonitrile NBR for cold polymerization systems. Its specific gravity is 1.00 and it contains 40.5% bound acrylonitrile NBR. | |

Nipol® 1041L | Zeon Corporation | Nipol® 1041L is a high nitrile rubber (NBR) that can be used in strong cements and adhesives. This product is a standard high acrylonitrile NBR for cold polymerization systems. Its specific gravity is 1.00 and it contains 40.5% bound acrylonitrile NBR. ...展开 Nipol® 1041L is a high nitrile rubber (NBR) that can be used in strong cements and adhesives. This product is a standard high acrylonitrile NBR for cold polymerization systems. Its specific gravity is 1.00 and it contains 40.5% bound acrylonitrile NBR. This product is a low Mooney version of N21 that provides good processability. 收起 | |

Nipol® 1072 | Zeon Corporation | Nipol® 1072 is a high nitrile rubber (NBR) terpolymer that can be used in adhesives and industrial parts. This product is a carboxylated NBR that provides good abrasion resistance and tensile strength. Its specific gravity is 0.98 and it contains 27.0% ...展开 Nipol® 1072 is a high nitrile rubber (NBR) terpolymer that can be used in adhesives and industrial parts. This product is a carboxylated NBR that provides good abrasion resistance and tensile strength. Its specific gravity is 0.98 and it contains 27.0% bound acrylonitrile NBR. 收起 | |

Nipol® 1562 | Zeon Corporation | Nipol® 1562 is a latex of an acrylonitrile butadiene copolymer that can be used in adhesives. This product's pH is 10.0 and it contains 41% solids. Its average particle diameter is 50 nanometers, and its glass transition temperature is -21 degrees Celsi...展开 Nipol® 1562 is a latex of an acrylonitrile butadiene copolymer that can be used in adhesives. This product's pH is 10.0 and it contains 41% solids. Its average particle diameter is 50 nanometers, and its glass transition temperature is -21 degrees Celsius. 收起 | |

Nipol® 1571C2 | Zeon Corporation | Nipol® 1571C2 is a latex of an acrylonitrile butadiene rubber that can be used in adhesives. This product's pH is 8.5 and it contains 45% solids. Its average particle diameter is 120 nanometers and its glass transition temperature is -10 degrees Celsius...展开 Nipol® 1571C2 is a latex of an acrylonitrile butadiene rubber that can be used in adhesives. This product's pH is 8.5 and it contains 45% solids. Its average particle diameter is 120 nanometers and its glass transition temperature is -10 degrees Celsius. 收起 | |

Nipol® 1571CL | Zeon Corporation | Nipol® 1571CL is a latex of an acrylonitrile butadiene rubber that can be used in adhesives. This product's pH is 8.0 and it contains 38% solids. Its average particle diameter is 100 nanometers and its glass transition temperature is -11 degrees Celsius...展开 Nipol® 1571CL is a latex of an acrylonitrile butadiene rubber that can be used in adhesives. This product's pH is 8.0 and it contains 38% solids. Its average particle diameter is 100 nanometers and its glass transition temperature is -11 degrees Celsius. 收起 | |

Nipol® 1571H | Zeon Corporation | Nipol® 1571H is a latex of an acrylonitrile butadiene copolymer that can be used in adhesives. This product's pH is 8.3 and it contains 40% solids. Its average particle diameter is 120 nanometers and its glass transition temperature is -8 degrees Celsiu...展开 Nipol® 1571H is a latex of an acrylonitrile butadiene copolymer that can be used in adhesives. This product's pH is 8.3 and it contains 40% solids. Its average particle diameter is 120 nanometers and its glass transition temperature is -8 degrees Celsius. 收起 | |

Nipol® DN101 | Zeon Corporation | Nipol® DN101 is a high nitrile rubber (NBR) that can be used in strong cements and adhesives. This product has good resistance to mold fouling and good metal corrosion resistance. Its specific gravity is 1.00 and it contains 42.5% bound acrylonitrile ru...展开 Nipol® DN101 is a high nitrile rubber (NBR) that can be used in strong cements and adhesives. This product has good resistance to mold fouling and good metal corrosion resistance. Its specific gravity is 1.00 and it contains 42.5% bound acrylonitrile rubber. 收起 | |

Nipol® DN101L | Zeon Corporation | Nipol® DN101L is a high nitrile rubber (NBR) that can be used in strong cements and adhesives. This product has good resistance to mold fouling and good metal corrosion resistance. Its specific gravity is 1.00 and it contains 42.5% bound acrylonitrile r...展开 Nipol® DN101L is a high nitrile rubber (NBR) that can be used in strong cements and adhesives. This product has good resistance to mold fouling and good metal corrosion resistance. Its specific gravity is 1.00 and it contains 42.5% bound acrylonitrile rubber. This product has a lower Mooney viscosity than DN101. 收起 | |

Nipol® LX110 | Zeon Corporation | Nipol® LX110 is a latex of a styrene-butadiene copolymer that can be used adhesives. This product's pH is 11.5 and it contains 40.5% solids. its average particle diameter is 80 nanometers and its glass transition temperature is -47 degrees Celsius. | |

Nipol® LX112 | Zeon Corporation | Nipol® LX112 is a latex of a styrene-butadiene copolymer that can be used in adhesives. This product's pH is 11.0 and it contains 40.5% solids. Its average particle diameter is 80 nanometers and its glass transition temperature is -47 degrees Celsius. | |

Nipol® LX426 | Zeon Corporation | Nipol® LX426 is a latex of a styrene-butadiene copolymer that can be used in adhesives. This product's pH is 8.5 and it contains 50% solids. Its average particle diameter is 120 nanometers and its glass transition temperature is -39 degrees Celsius. | |

Nipol® LX430 | Zeon Corporation | Nipol® LX430 is a latex of a styrene-butadiene copolymer that can be used in wood adhesives. This product's pH is 7.0 and it contains 49% solids. Its average particle diameter is 150 nanometers and its glass transition temperature is 12 degrees Celsius. | |

Nipol® LX432M | Zeon Corporation | Nipol® LX432M is a latex of a styrene-butadiene copolymer that can be used in adhesives and primers for masking tape. This product's pH is 8.0 and it contains 41% solids. Its average particle diameter is 130 nanometers and its glass transition temperatu...展开 Nipol® LX432M is a latex of a styrene-butadiene copolymer that can be used in adhesives and primers for masking tape. This product's pH is 8.0 and it contains 41% solids. Its average particle diameter is 130 nanometers and its glass transition temperature is -55 degrees Celsius. 收起 | |

Nipol® LX435 | Zeon Corporation | Nipol® LX435 is a latex of a styrene-butadiene copolymer that can be used in adhesives. This product's pH is 8.5 and it contains 50% solids. Its average particle diameter is 120 nanometers and its glass transition temperature is -14 degrees Celsius. | |

Nipol® LX473D | Zeon Corporation | Nipol® LX473D is a latex of a styrene-butadiene copolymer that can be used in flooring adhesives. This product's average particle diameter is 80 nanometers and it contains 47.5% solids. Its pH is 8.5 and its glass transition temperature is -15 degrees C...展开 Nipol® LX473D is a latex of a styrene-butadiene copolymer that can be used in flooring adhesives. This product's average particle diameter is 80 nanometers and it contains 47.5% solids. Its pH is 8.5 and its glass transition temperature is -15 degrees Celsius. 收起 | |

Nipol® LX511A | Zeon Corporation | Nipol® LX511A is a latex of an acrylonitrile butadiene copolymer that can be used in adhesives. This product's pH is 8.0 and it contains 46% solids. Its average particle diameter is 170 nanometers and its glass transition temperature is -19 degrees Cels...展开 Nipol® LX511A is a latex of an acrylonitrile butadiene copolymer that can be used in adhesives. This product's pH is 8.0 and it contains 46% solids. Its average particle diameter is 170 nanometers and its glass transition temperature is -19 degrees Celsius. 收起 | |

Nipol® LX513 | Zeon Corporation | Nipol® LX513 is a latex of an acrylonitrile butadiene copolymer that can be used in adhesives. This product's pH is 10.0 and it contains 45% solids. Its average particle diameter is 140 nanometers and its glass transition temperature is -31 degrees Cels...展开 Nipol® LX513 is a latex of an acrylonitrile butadiene copolymer that can be used in adhesives. This product's pH is 10.0 and it contains 45% solids. Its average particle diameter is 140 nanometers and its glass transition temperature is -31 degrees Celsius. 收起 | |

Nipol® LX517B | Zeon Corporation | Nipol® LX517B is a latex of an acrylonitrile butadiene copolymer that can be used in adhesives. This product's pH is 8.0 and it contains 40% solids. Its average particle diameter is 120 nanometers and its glass transition temperature is -16 degrees Cels...展开 Nipol® LX517B is a latex of an acrylonitrile butadiene copolymer that can be used in adhesives. This product's pH is 8.0 and it contains 40% solids. Its average particle diameter is 120 nanometers and its glass transition temperature is -16 degrees Celsius. 收起 | |

Nipol® LX550 | Zeon Corporation | Nipol® LX550 is a latex of an acrylonitrile butadiene copolymer that can be used in adhesives. This product's pH is 8.5 and it contains 45% solids. Its average particle diameter is 110 nanometers and its glass transition temperature is -27 degrees Celsi...展开 Nipol® LX550 is a latex of an acrylonitrile butadiene copolymer that can be used in adhesives. This product's pH is 8.5 and it contains 45% solids. Its average particle diameter is 110 nanometers and its glass transition temperature is -27 degrees Celsius. 收起 | |

Nipol® LX550L | Zeon Corporation | Nipol® LX550L is a latex of an acrylonitrile butadiene copolymer that can be used in adhesives. This product's pH is 8.3 and it contains 45% solids. Its average particle diameter is 110 nanometers and its glass transition temperature is -27 degrees Cels...展开 Nipol® LX550L is a latex of an acrylonitrile butadiene copolymer that can be used in adhesives. This product's pH is 8.3 and it contains 45% solids. Its average particle diameter is 110 nanometers and its glass transition temperature is -27 degrees Celsius. 收起 | |

Nipol® LX551 | Zeon Corporation | Nipol® LX551 is a latex of an acrylonitrile butadiene copolymer that can be used in adhesives. This product's pH is 8.5 and it contains 45% solids. Its average particle diameter is 120 nanometers and its glass transition temperature is -14 degrees Celsi...展开 Nipol® LX551 is a latex of an acrylonitrile butadiene copolymer that can be used in adhesives. This product's pH is 8.5 and it contains 45% solids. Its average particle diameter is 120 nanometers and its glass transition temperature is -14 degrees Celsius. 收起 | |

Nipol® LX552 | Zeon Corporation | Nipol® LX552 is a latex of an acrylonitrile butadiene copolymer that can be used in adhesives. This product's pH is 8.0 and it contains 45% solids. Its average particle diameter is 110 nanometers and its glass transition temperature is -12 degrees Celsi...展开 Nipol® LX552 is a latex of an acrylonitrile butadiene copolymer that can be used in adhesives. This product's pH is 8.0 and it contains 45% solids. Its average particle diameter is 110 nanometers and its glass transition temperature is -12 degrees Celsius. 收起 | |

Nipol® LX811H | Zeon Corporation | Nipol® LX811H is a latex of copolymerized alkylester acrylic acid and alkylester metacrylic acid, which can be used in adhesives. This product's pH is 6.5 and it contains 50% solids. Its viscosity is 170 mPas and its glass transition temperature is 1 de...展开 Nipol® LX811H is a latex of copolymerized alkylester acrylic acid and alkylester metacrylic acid, which can be used in adhesives. This product's pH is 6.5 and it contains 50% solids. Its viscosity is 170 mPas and its glass transition temperature is 1 degree Celsius. 收起 | |

Nipol® LX814 | Zeon Corporation | Nipol® LX814 is a latex of copolymerized alkylester acrylic acid and alkylester metacrylic acid, which can be used in adhesives. This product's pH is 6.0 and it contains 46% solids. Its viscosity is 30 mPas and its glass transition temperature is 25 deg...展开 Nipol® LX814 is a latex of copolymerized alkylester acrylic acid and alkylester metacrylic acid, which can be used in adhesives. This product's pH is 6.0 and it contains 46% solids. Its viscosity is 30 mPas and its glass transition temperature is 25 degrees Celsius. 收起 | |

Nipol® LX816A | Zeon Corporation | Nipol® LX816A is a latex of copolymerized alkylester acrylic acid and alkylester metacrylic acid, which can be used in adhesives and pigment printing. This product's pH is 2.0 and it contains 42% solids. Its viscosity is 30 mPas and its glass transition...展开 Nipol® LX816A is a latex of copolymerized alkylester acrylic acid and alkylester metacrylic acid, which can be used in adhesives and pigment printing. This product's pH is 2.0 and it contains 42% solids. Its viscosity is 30 mPas and its glass transition temperature is -10 degrees Celsius. 收起 | |

Nipol® LX820A | Zeon Corporation | Nipol® LX820A is a latex of copolymerized alkylester acrylic acid and alkylester metacrylic acid, which can be used in adhesives and paints. This product's pH is 7.5 and it contains 55% solids. Its viscosity is 3,000 mPas and its glass transition temper...展开 Nipol® LX820A is a latex of copolymerized alkylester acrylic acid and alkylester metacrylic acid, which can be used in adhesives and paints. This product's pH is 7.5 and it contains 55% solids. Its viscosity is 3,000 mPas and its glass transition temperature is -43 degrees Celsius. 收起 | |

Nipol® LX851C | Zeon Corporation | Nipol® LX851C is a latex of copolymerized alkylester acrylic acid and alkylester metacrylic acid that can be used in pigment printing applications. This product contains extremely low formaldehyde and resists discoloration from light and age. It cont...展开 Nipol® LX851C is a latex of copolymerized alkylester acrylic acid and alkylester metacrylic acid that can be used in pigment printing applications. This product contains extremely low formaldehyde and resists discoloration from light and age. It contains 45% solids and its pH is 6.5. 收起 | |

Nipol® LX851E | Zeon Corporation | Nipol® LX851E is a latex of copolymerized alkylester acrylic acid and alkylester metacrylic acid that can be used in pigment printing applications. This product contains extremely low formaldehyde and resists discoloration from light and age. It contai...展开 Nipol® LX851E is a latex of copolymerized alkylester acrylic acid and alkylester metacrylic acid that can be used in pigment printing applications. This product contains extremely low formaldehyde and resists discoloration from light and age. It contains 45% solids and its pH is 6.0. 收起 | |

Nipol® LX851F2 | Zeon Corporation | Nipol® LX851F2 is a latex of copolymerized alkylester acrylic acid and alkylester metacrylic acid that can be used in pigment printing applications. This product contains extremely low formaldehyde and resists discoloration from light and age. It contain...展开 Nipol® LX851F2 is a latex of copolymerized alkylester acrylic acid and alkylester metacrylic acid that can be used in pigment printing applications. This product contains extremely low formaldehyde and resists discoloration from light and age. It contains 45% solids and its pH is 7.0. 收起 | |

Nipol® LX852B | Zeon Corporation | Nipol® LX852B is a latex of copolymerized alkylester acrylic acid and alkylester metacrylic acid that can be used in pigment printing applications. This product contains extremely low formaldehyde and resists discoloration from light and age. It contains...展开 Nipol® LX852B is a latex of copolymerized alkylester acrylic acid and alkylester metacrylic acid that can be used in pigment printing applications. This product contains extremely low formaldehyde and resists discoloration from light and age. It contains 45% solids and its pH is 6.5. 收起 | |

Nipol® LX854E | Zeon Corporation | Nipol® LX854E is a latex of copolymerized alkylester acrylic acid and alkylester metacrylic acid that can be used in pigment printing applications. This product contains low formaldehyde and 45% solids. Its pH is 6.5 and its glass transition temperature...展开 Nipol® LX854E is a latex of copolymerized alkylester acrylic acid and alkylester metacrylic acid that can be used in pigment printing applications. This product contains low formaldehyde and 45% solids. Its pH is 6.5 and its glass transition temperature is -10 degrees Celsius. 收起 | |

Nipol® LX874 | Zeon Corporation | Nipol® LX874 is a latex of copolymerized alkylester acrylic acid and alkylester metacrylic acid, which can be used in adhesives and pigment printing. This product is resistant to dry cleaning with good waterproofing characteristics. It contains 45% soli...展开 Nipol® LX874 is a latex of copolymerized alkylester acrylic acid and alkylester metacrylic acid, which can be used in adhesives and pigment printing. This product is resistant to dry cleaning with good waterproofing characteristics. It contains 45% solids and its pH is 6.5. 收起 | |

Quintone® 1325 | Zeon Corporation | Quintone® 1325 is a petroleum resin made mainly from high-purity dicyclopentadiene that has been abstracted from C5 fractions. This product can be used in oil and alkyd paints, printing inks, and as a tackifier for rubber adhesives. Its softening point ...展开 Quintone® 1325 is a petroleum resin made mainly from high-purity dicyclopentadiene that has been abstracted from C5 fractions. This product can be used in oil and alkyd paints, printing inks, and as a tackifier for rubber adhesives. Its softening point is 125 degrees Celsius and its molecular weight is 460. 收起 | |

Quintone® 1345 | Zeon Corporation | Quintone® 1345 is a petroleum resin made mainly from high-purity dicyclopentadiene that has been abstracted from C5 fractions. This product can be used in oil and alkyd paints, printing inks, and as a tackifier for rubber adhesives. Its softening point ...展开 Quintone® 1345 is a petroleum resin made mainly from high-purity dicyclopentadiene that has been abstracted from C5 fractions. This product can be used in oil and alkyd paints, printing inks, and as a tackifier for rubber adhesives. Its softening point is 140 degrees Celsius and its molecular weight is 500. 收起 | |

Quintone® 1500 | Zeon Corporation | Quintone® 1500 is a petroleum resin made mainly from high-purity dicyclopentadiene that has been abstracted from C5 fractions. This product can be used in nitrocellulose lacquer alkyd epoxies, polyester paints, and adhesives. Its softening point is 100 ...展开 Quintone® 1500 is a petroleum resin made mainly from high-purity dicyclopentadiene that has been abstracted from C5 fractions. This product can be used in nitrocellulose lacquer alkyd epoxies, polyester paints, and adhesives. Its softening point is 100 degrees Celsius and its molecular weight is 420. 收起 | |

Quintone® 1525L | Zeon Corporation | Quintone® 1525L is a petroleum resin made mainly from high-purity dicyclopentadiene that has been abstracted from C5 fractions. This product can be used in nitrocellulose lacquer alkyd epoxies, polyester paints, and adhesives. Its softening point is 125...展开 Quintone® 1525L is a petroleum resin made mainly from high-purity dicyclopentadiene that has been abstracted from C5 fractions. This product can be used in nitrocellulose lacquer alkyd epoxies, polyester paints, and adhesives. Its softening point is 125 degrees Celsius and its molecular weight is 470. 收起 | |

Quintone® A100 | Zeon Corporation | Quintone® A100 is a petroleum resin made mainly from high-purity 1,3-pentadiene that has been abstracted from C5 fractions. This product can be used in adhesives for natural rubber. Its softening point is 100 degrees Celsius and it contains less than 0....展开 Quintone® A100 is a petroleum resin made mainly from high-purity 1,3-pentadiene that has been abstracted from C5 fractions. This product can be used in adhesives for natural rubber. Its softening point is 100 degrees Celsius and it contains less than 0.1 mg of potassium hydroxide per gram. 收起 | |

Quintone® B170 | Zeon Corporation | Quintone® B170 is a petroleum resin made mainly from high-purity 1,3-pentadiene that has been abstracted from C5 fractions. This product can be used in adhesives. Its softening point is 70 degrees Celsius, and it contains less than 0.1 mg of potassium h...展开 Quintone® B170 is a petroleum resin made mainly from high-purity 1,3-pentadiene that has been abstracted from C5 fractions. This product can be used in adhesives. Its softening point is 70 degrees Celsius, and it contains less than 0.1 mg of potassium hydroxide per gram. 收起 | |

Quintone® C200H (ZCT) | Zeon Corporation | Quintone® C200H (ZCT) is a petroleum resin made mainly from 1,3-pentadiene that has been abstracted from C5 fractions. This product can be used in hot-melt traffic paints and provides good heat stability and colors. Its softening point is 101 degrees Ce...展开 Quintone® C200H (ZCT) is a petroleum resin made mainly from 1,3-pentadiene that has been abstracted from C5 fractions. This product can be used in hot-melt traffic paints and provides good heat stability and colors. Its softening point is 101 degrees Celsius and it contains 1.7 mg of potassium hydroxide per gram. 收起 | |

Quintone® C200S | Zeon Corporation | Quintone® C200S is a petroleum made mainly from 1,3-pentadiene that has been abstracted from C5 fractions. This product can be used in hot-melt traffic paints and provides good heat stability and colors. Its softening point is 96 degrees Celsius and it ...展开 Quintone® C200S is a petroleum made mainly from 1,3-pentadiene that has been abstracted from C5 fractions. This product can be used in hot-melt traffic paints and provides good heat stability and colors. Its softening point is 96 degrees Celsius and it contains 1.7 mg of potassium hydroxide per gram. 收起 | |

Quintone® C210 (ZCT) | Zeon Corporation | Quintone® C210 (ZCT) is a petroleum resin made mainly from 1,3-pentadiene that has been abstracted from C5 fractions. This product can be used in hot-melt traffic paints and provides good heat stability and colors. Its softening point is 110 degrees Cel...展开 Quintone® C210 (ZCT) is a petroleum resin made mainly from 1,3-pentadiene that has been abstracted from C5 fractions. This product can be used in hot-melt traffic paints and provides good heat stability and colors. Its softening point is 110 degrees Celsius and it contains 1.7 mg of potassium hydroxide per gram. 收起 | |

Quintone® D100 | Zeon Corporation | Quintone® D100 is a petroleum resin made mainly from 1,3-pentadiene that has been abstracted from C5 and C9 fractions. This product is compatible with SBR and EVA and can be used in adhesive tapes and hot melt adhesives. Its softening point is 99 degree...展开 Quintone® D100 is a petroleum resin made mainly from 1,3-pentadiene that has been abstracted from C5 and C9 fractions. This product is compatible with SBR and EVA and can be used in adhesive tapes and hot melt adhesives. Its softening point is 99 degrees Celsius and contains less than 0.1 mg of potassium hydroxide per gram. 收起 | |

Quintone® E200SN | Zeon Corporation | Quintone® E200SN is a petroleum resin made mainly from 1,3-pentadiene that has been abstracted from C5 and C9 fractions. This product can be used in rubber adhesives. Its softening point is 102 degrees Celsius and it contains 1.7 mg of potassium hydroxi...展开 Quintone® E200SN is a petroleum resin made mainly from 1,3-pentadiene that has been abstracted from C5 and C9 fractions. This product can be used in rubber adhesives. Its softening point is 102 degrees Celsius and it contains 1.7 mg of potassium hydroxide per gram. 收起 | |

Quintone® G100B | Zeon Corporation | Quintone® G100B is a petroleum resin made mainly from 1,3-pentadiene that has been abstracted from C5 and C9 fractions. This product can be used in EVA hot-melt adhesives and rubber modifiers. Its softening point is 100 degrees Celsius and it contains l...展开 Quintone® G100B is a petroleum resin made mainly from 1,3-pentadiene that has been abstracted from C5 and C9 fractions. This product can be used in EVA hot-melt adhesives and rubber modifiers. Its softening point is 100 degrees Celsius and it contains less than 0.1 mg of potassium hydroxide per gram. 收起 | |

Quintone® G115 | Zeon Corporation | Quintone® G115 is a petroleum resin made mainly from 1,3-pentadiene that has been abstracted from C5 and C9 fractions. This product can be used in EVA hot melt adhesives. Its softening point is 115 degrees Celsius and it contains less than 0.1 mg of pot...展开 Quintone® G115 is a petroleum resin made mainly from 1,3-pentadiene that has been abstracted from C5 and C9 fractions. This product can be used in EVA hot melt adhesives. Its softening point is 115 degrees Celsius and it contains less than 0.1 mg of potassium hydroxide per gram. 收起 | |

Quintone® K100 | Zeon Corporation | Quintone® K100 is a petroleum resin made mainly from high-purity 1,3-pentadiene that has been abstracted from C5 fractions. This product can be used in SIS adhesives. Its softening point is 101 degrees Celsius and it contains less than 0.1 mg of potassi...展开 Quintone® K100 is a petroleum resin made mainly from high-purity 1,3-pentadiene that has been abstracted from C5 fractions. This product can be used in SIS adhesives. Its softening point is 101 degrees Celsius and it contains less than 0.1 mg of potassium hydroxide per gram. 收起 | |

Quintone® M100 | Zeon Corporation | Quintone® M100 is a petroleum resin made mainly from high-purity 1,3-pentadiene that has been abstracted from C5 fractions. This product can be used in SIS adhesives. Its softening point is 95 degrees Celsius and it contains less than 0.1 mg of potassiu...展开 Quintone® M100 is a petroleum resin made mainly from high-purity 1,3-pentadiene that has been abstracted from C5 fractions. This product can be used in SIS adhesives. Its softening point is 95 degrees Celsius and it contains less than 0.1 mg of potassium hydroxide per gram. 收起 | |

Quintone® N180 | Zeon Corporation | Quintone® N180 is a petroleum resin made mainly from 1,3-pentadiene that has been abstracted from C5 and C9 fractions. This product can be used in SIS hot-melt adhesives. Its softening point is 80 degrees Celsius and it contains less than 0.1 mg of pota...展开 Quintone® N180 is a petroleum resin made mainly from 1,3-pentadiene that has been abstracted from C5 and C9 fractions. This product can be used in SIS hot-melt adhesives. Its softening point is 80 degrees Celsius and it contains less than 0.1 mg of potassium hydroxide per gram. 收起 | |

Quintone® N295 | Zeon Corporation | Quintone® N295 is a petroleum resin made mainly from 1,3-pentadiene that has been abstracted from C5 and C9 fractions. This product can be used in SIS adhesives. Its softening point is 95 degrees Celsius and it contains 0.5 mg of potassium hydroxide per...展开 Quintone® N295 is a petroleum resin made mainly from 1,3-pentadiene that has been abstracted from C5 and C9 fractions. This product can be used in SIS adhesives. Its softening point is 95 degrees Celsius and it contains 0.5 mg of potassium hydroxide per gram. 收起 | |

Quintone® P195N | Zeon Corporation | Quintone® P195N is a petroleum resin made mainly from 1,3-pentadiene that has been abstracted from C5 and C9 fractions. This product is compatible with SBS and EVA and can be used in light-colored hot melt adhesives. Its softening point is 94 degrees Ce...展开 Quintone® P195N is a petroleum resin made mainly from 1,3-pentadiene that has been abstracted from C5 and C9 fractions. This product is compatible with SBS and EVA and can be used in light-colored hot melt adhesives. Its softening point is 94 degrees Celsius and it contains less than 0.1 mg of potassium hydroxide per gram. 收起 | |

Quintone® R100 | Zeon Corporation | Quintone® R100 is a petroleum resin made mainly from high-purity 1,3-pentadiene that has been abstracted from C5 fractions. This product can be used in SIS adhesives. Its softening point is 96 degrees Celsius and it contains less than 0.1 mg of potassiu...展开 Quintone® R100 is a petroleum resin made mainly from high-purity 1,3-pentadiene that has been abstracted from C5 fractions. This product can be used in SIS adhesives. Its softening point is 96 degrees Celsius and it contains less than 0.1 mg of potassium hydroxide per gram. 收起 | |

Quintone® S100 | Zeon Corporation | Quintone® S100 is a petroleum resin made mainly from 1,3-pentadiene that has been abstracted from C5 and C9 fractions. This product can be used in SIS adhesives. Its softening point is 94 degrees Celsius and it contains less than 0.1 mg of potassium hyd...展开 Quintone® S100 is a petroleum resin made mainly from 1,3-pentadiene that has been abstracted from C5 and C9 fractions. This product can be used in SIS adhesives. Its softening point is 94 degrees Celsius and it contains less than 0.1 mg of potassium hydroxide per gram. 收起 | |

Quintone® U185 | Zeon Corporation | Quintone® U185 is a petroleum resin made mainly from 1,3-pentadiene that has been abstracted from C5 and C9 fractions. This product is compatible with SBR and EVA and can be used in adhesive tapes and hot melt adhesives. Its softening point is 86 degree...展开 Quintone® U185 is a petroleum resin made mainly from 1,3-pentadiene that has been abstracted from C5 and C9 fractions. This product is compatible with SBR and EVA and can be used in adhesive tapes and hot melt adhesives. Its softening point is 86 degrees Celsius and contains less than 0.1 mg of potassium hydroxide per gram. 收起 | |

Quintone® U190 | Zeon Corporation | Quintone® U190 is a petroleum resin derivative made mainly from 1,3-pentadiene that has been abstracted from C5 and C9 fractions. This product can be used in SIS adhesives. Its softening point is 89 degrees Celsius and it contains less than 0.1 mg of po...展开 Quintone® U190 is a petroleum resin derivative made mainly from 1,3-pentadiene that has been abstracted from C5 and C9 fractions. This product can be used in SIS adhesives. Its softening point is 89 degrees Celsius and it contains less than 0.1 mg of potassium hydroxide per gram. 收起 | |

YGA100-1 | Nanjing Yuangang Fine Chemical Co., Ltd. | YGA100-1 is a hydrogenated petroleum resin, in white granular form. This product can be used in coatings, adhesives, hot melt road marking paints, inks, and paint additives. | |

YGA100-2 | Nanjing Yuangang Fine Chemical Co., Ltd. | YGA100-2 is a hydrogenated petroleum resin, in white granular form. This product can be used in coatings, adhesives, hot melt road marking paints, inks, and paint additives. | |

YGA110-1 | Nanjing Yuangang Fine Chemical Co., Ltd. | YGA110-1 is a hydrogenated petroleum resin, in white granular form. This product can be used in coatings, adhesives, hot melt road marking paints, inks, and paint additives. | |

YGA110-2 | Nanjing Yuangang Fine Chemical Co., Ltd. | YGA110-2 is a hydrogenated petroleum resin, in white granular form. This product can be used in coatings, adhesives, hot melt road marking paints, inks, and paint additives. | |

YGB100-1 | Nanjing Yuangang Fine Chemical Co., Ltd. | YGB100-1 is a hydrogenated petroleum resin, in white granular form. This product can be used in hot melt road marking paints to increase toughness, hardness, and adhesion. | |

YGB100-2 | Nanjing Yuangang Fine Chemical Co., Ltd. | YGB100-2 is a hydrogenated petroleum resin, in white granular form. This product can be used in hot melt road marking paints to increase toughness, hardness, and adhesion. |

- 1