| SILCOLEASE UV CATA 102 | Elkem Silicones | SILCOLEASE UV CATA 102 is a photo initiator for free radical UV curing of silicone acrylate release coatings. It is intended for use with our SILCOLEASE UV Poly 110/UV RCA 170 release chemistry for coating onto a broad selection of paper and film substr...展开 SILCOLEASE UV CATA 102 is a photo initiator for free radical UV curing of silicone acrylate release coatings. It is intended for use with our SILCOLEASE UV Poly 110/UV RCA 170 release chemistry for coating onto a broad selection of paper and film substrates, providing release properties against a wide range of adhesive materials. Curing of the coating by UV radiation is rapid and efficient, resulting in stable release performance and excellent anchorage to the substrate. Typical addition level is 3% SILCOLEASE UV CATA 102 by weight on the total formulated bath. 收起 | |
| SILCOLEASE UV CATA 211 | Elkem Silicones | SILCOLEASE UV CATA 211 is a diaryliodonium salt in solution. It is mainly used as a photoinitiator for the polymerization of SILCOLEASE UV POLY 200 and BLUESIL UV 1 V 350. | |
| SILCOLEASE UV CATA 221 | Elkem Silicones | SILCOLEASE UV CATA 221 UV/EB cationic initiator is a 20% solids solution of diaryl iodonium tetrakis (pentafluoro phenyl) borate salt in reactive diluent providing low toxicity with high reactivity for fast ultraviolet light and electron beam initiated c...展开 SILCOLEASE UV CATA 221 UV/EB cationic initiator is a 20% solids solution of diaryl iodonium tetrakis (pentafluoro phenyl) borate salt in reactive diluent providing low toxicity with high reactivity for fast ultraviolet light and electron beam initiated cures at low levels of addition. When blended with the unique chemistry of our SILCOLEASE UV/EB silicone polymer cure systems, and coated using standard solventless coating techniques, these SILCOLEASE UV CATA 221 UV/EB cationic initiator catalyzed formulations are intended for use as release surfaces on a wide selection of papers and films, and against a wide range of adhesive materials. Rapid and stable cure with excellent anchorage to paper and film is achieved by simply passing the coating under high-intensity ultraviolet light (medium pressure mercury vapor bulbs) or under electron beam irradiation. See the "SILCOLEASE UV POLY 200 / SILCOLEASEUV RCA 200 / SILCOLEASEUV RCA 251 / SILCOLEASEUV CATA 221 UV/EB SILICONE CURE SYSTEM" and "SILCOLEASE UV POLY 235 / SILCOLEASEUV CATA 221 UV/EB SILICONE CURE SYSTEM"Technical Data Sheets for a full discussion of Features and Benefits, Formulation Guidelines, Suggested Starting Formulations, and Release Performance. 收起 | |
| SILCOLEASE UV CATA 243 | Elkem Silicones | SILCOLEASE UV CATA 243 is a low odour photoinitiator used for the polymerization of SILCOLEASE UV 200 Series of base polymers. It may also be used with epoxy resins, vinyl ethers or any other type of oligomer which reacts via a cationic polymerisation mec...展开 SILCOLEASE UV CATA 243 is a low odour photoinitiator used for the polymerization of SILCOLEASE UV 200 Series of base polymers. It may also be used with epoxy resins, vinyl ethers or any other type of oligomer which reacts via a cationic polymerisation mechanism. It is also suited to the formulation of hybrid radical / cationic systems. 收起 | |
| SILCOLEASE UV POLY 110 | Elkem Silicones | SILCOLEASE UV POLY 110 UV/EB silicone system is a 100% reactive release coating chemistry based on acrylate-modified silicone copolymer technology. Instant and complete cure is achieved by simply passing the coating under either UV light (with added phot...展开 SILCOLEASE UV POLY 110 UV/EB silicone system is a 100% reactive release coating chemistry based on acrylate-modified silicone copolymer technology. Instant and complete cure is achieved by simply passing the coating under either UV light (with added photoinitiator) or Electron Beam (no photoinitiator required). SILCOLEASEUV POLY 110 silicone polymer can be modified for "easy" and "premium" low release by blending with a release modifier, SILCOLEASE UV RCA 170. Initial and aged releases are very smooth and stable against a wide variety of adhesive materials. 收起 | |
| SILCOLEASE UV POLY 118 | Elkem Silicones | SILCOLEASE UV POLY 118 can be used in coatings, hygiene, non-stick coatings, pressure sensitive adhesives, release agents, and release liners. | |
| SILCOLEASE UV POLY 120 U1 | Elkem Silicones | SILCOLEASE UV POLY 120 UV cure silicone system is a 100% reactive “ready to use” release coating chemistry based on silicone-acrylate copolymer technology. It is specially designed to produce easy release performance. When applied using standard solventl...展开 SILCOLEASE UV POLY 120 UV cure silicone system is a 100% reactive “ready to use” release coating chemistry based on silicone-acrylate copolymer technology. It is specially designed to produce easy release performance. When applied using standard solventless coating or printing techniques, SILCOLEASE UV POLY 120 will impart a release surface on a wide variety of papers and films, and against a wide range of pressure sensitive adhesive materials. Rapid and stable cure with excellent anchorage to paper and film is achieved by simply passing the coating under high intensity ultraviolet light (medium pressure mercury vapor bulbs). 收起 | |
| SILCOLEASE UV POLY 200 | Elkem Silicones | SILCOLEASE UV POLY 200 is a silicone polymer curing under U.V. radiation suitable for release applications involving papers, plastic films and various substrates. | |
| SILCOLEASE UV POLY 201 | Elkem Silicones | SILCOLEASE UV POLY 201 UV/EB silicone polymer is a 100% reactive high viscosity release coating component based on epoxy-silicone copolymer technology. It contains a high level of epoxy functional reactive sites distributed along the silicone polymer ba...展开 SILCOLEASE UV POLY 201 UV/EB silicone polymer is a 100% reactive high viscosity release coating component based on epoxy-silicone copolymer technology. It contains a high level of epoxy functional reactive sites distributed along the silicone polymer backbone and has a narrow molecular weight distribution When blended with the unique chemistry of our patented SILCOLEASE CATA 221 UV/EB cationic photoinitiator and coated using standard solventless coating techniques, the SILCOLEASE UV POLY 201 system is intended for use as a release surface on a wide selection of papers and films, and against a wide range of adhesive materials. Rapid and stable cure with excellent anchorage to paper and film is achieved by simply passing the coating under high-intensity ultraviolet light (medium pressure mercury vapor bulbs) or electron beam irradiation. 收起 | |
| SILCOLEASE UV POLY 204 | Elkem Silicones | SILCOLEASE UV POLY 204 is a 100% reactive release coating chemistry based on epoxy silicone copolymer technology. In combination with the patented Iodonium Borate UV photoinitiator technology it offers a highly reactive system with excellent anchorage on ...展开 SILCOLEASE UV POLY 204 is a 100% reactive release coating chemistry based on epoxy silicone copolymer technology. In combination with the patented Iodonium Borate UV photoinitiator technology it offers a highly reactive system with excellent anchorage on difficult low surface energy filmic substrates. Whilst the polymer can be used alone it is most commonly used as a viscosity reduction additive for the polymers UV POLY 200 or UV POLY 215. 收起 | |
| SILCOLEASE UV POLY 205 | Elkem Silicones | SILCOLEASE UV POLY 205 is a silicone polymer curing under U.V. radiation suitable for release applications involving papers, plastic films and various substrates. | |
| SILCOLEASE UV POLY 206 | Elkem Silicones | SILCOLEASE UV POLY 206 UV/EB "Monocomponent" silicone system is a 100% reactive "ready to use" release coating chemistry based on epoxy-silicone copolymer technology. It consists of an optimized "low release" pre-blend of UV/EB silicone polymer and UV/EB...展开 SILCOLEASE UV POLY 206 UV/EB "Monocomponent" silicone system is a 100% reactive "ready to use" release coating chemistry based on epoxy-silicone copolymer technology. It consists of an optimized "low release" pre-blend of UV/EB silicone polymer and UV/EB CRA-minus release modifier and UV/EB photoinitiator. When coated using standard solventless coating techniques, the SILCOLEASE UV POLY 206 "Monocomponent" silicone system is intended for use as a release surface on a wide selection of papers and films, and against a wide range of adhesive materials. Rapid and stable cure with excellent anchorage to paper and film is achieved by simply passing the coating under high intensity ultraviolet light (medium pressure mercury vapor bulbs) or electron beam irradiation. 收起 | |
| SILCOLEASE UV POLY 215 | Elkem Silicones | SILCOLEASE UV POLY 215 is a 100% reactive release coating chemistry based on epoxy silicone copolymer technology. In combination with the patented UV photoinitiator technology, it offers a highly reactive system with excellent anchorage on difficult low s...展开 SILCOLEASE UV POLY 215 is a 100% reactive release coating chemistry based on epoxy silicone copolymer technology. In combination with the patented UV photoinitiator technology, it offers a highly reactive system with excellent anchorage on difficult low surface energy filmic substrates. 收起 | |
| SILCOLEASE UV POLY 220 | Elkem Silicones | SILCOLEASE UV POLY 220 is a 100% reactive release coating chemistry based on epoxy silicone copolymer. It is a premium release polymer which offers a highly reactive system with excellent anchorage on difficult low surface energy filmic substrates. | |
| SILCOLEASE UV POLY 230 | Elkem Silicones | SILCOLEASE UV POLY 230 UV/EB silicone is a "ready to use" release coating system based on epoxy-silicone copolymer technology. It is an optimized blend of a UV/EB silicone polymer, a UV/EB easy release modifier, and a photoinitiator. SILCOLEASE UV POLY 2...展开 SILCOLEASE UV POLY 230 UV/EB silicone is a "ready to use" release coating system based on epoxy-silicone copolymer technology. It is an optimized blend of a UV/EB silicone polymer, a UV/EB easy release modifier, and a photoinitiator. SILCOLEASE UV POLY 230 is intended use as a release surface on untreated films. This silicone release chemistry offers excellent anchorage eliminating the need for anchorage additives and corona treatment. It will also produce lower extractable silicone than traditional UV cure polymers. Rapid and stable cure is achieved by simply passing the coating under high-intensity ultraviolet light (medium pressure mercury vapor bulbs) or electron beam emitter. 收起 | |
| SILCOLEASE UV POLY 235 | Elkem Silicones | SILCOLEASE UV POLY 235 low release UV/EB silicone system is a 100% reactive release coating chemistry based on epoxy-silicone copolymer technology. When blended with the unique chemistry of our patented SILCOLEASE CATA 221 UV/EB cationic photoinitiator, ...展开 SILCOLEASE UV POLY 235 low release UV/EB silicone system is a 100% reactive release coating chemistry based on epoxy-silicone copolymer technology. When blended with the unique chemistry of our patented SILCOLEASE CATA 221 UV/EB cationic photoinitiator, and coated using standard solventless coating techniques, the SILCOLEASE UV POLY 235 system is intended for use as a release surface on a wide selection of papers and films, and against a wide range of adhesive materials. Rapid cure is achieved by simply passing the coating under high-intensity ultraviolet light (medium pressure mercury vapor bulbs) or under electron beam irradiation. 收起 | |
| SILCOLEASE UV POLY 246 | Elkem Silicones | SILCOLEASE UV POLY 246 UV cure silicone system is a 100% reactive “ready to use” release coating chemistry based on epoxy-silicone copolymer technology. It is specially designed to produce easy release performance. | |
| SILCOLEASE UV POLY 246 U1 | Elkem Silicones | SILCOLEASE UV POLY 246 UV cure silicone system is a 100% reactive “ready to use” release coating chemistry based on epoxy-silicone copolymer technology. It is specially designed to produce easy release performance. | |
| SILCOLEASE UV RCA 170 | Elkem Silicones | SILCOLEASE UV POLY 110 UV/EB silicone system is a 100% reactive release coating chemistry based on acrylate-modified silicone copolymer technology. Instant and complete cure is achieved by simply passing the coating under either UV light (with added photo...展开 SILCOLEASE UV POLY 110 UV/EB silicone system is a 100% reactive release coating chemistry based on acrylate-modified silicone copolymer technology. Instant and complete cure is achieved by simply passing the coating under either UV light (with added photoinitiator) or Electron Beam (no photoinitiator required). SILCOLEASE UV POLY 110 silicone polymer can be modified for “easy” and “premium” low release by blending with a release modifier, SILCOLEASE UV RCA 170. Initial and aged releases are very smooth and stable against a wide variety of adhesive materials. 收起 | |
| SILCOLEASE UV RCA 200 | Elkem Silicones | SILCOLEASE UV RCA 200 is a silicone polymer used as a release control additive for the SILCOLEASE UV POLY 200 system, curing under U.V. radiation. | |
| SILCOLEASE UV RCA 251 | Elkem Silicones | SILCOLEASE UV RCA 251 is a silicone polymer used as a release control additive for the SILCOLEASE UV POLY 200 system, curing under U.V. radiation. | |
| SILCOLEASE XL 12031 | Elkem Silicones | SILCOLEASE CROSSLINKER 12031 is a silicone polymer based reactive compound. It is used as a crosslinker in the solventless polyaddition SILCOLEASE systems. | |
| SILCOLEASE XL 196 | Elkem Silicones | SILCOLEASE CROSSLINKER 196 is used as a crosslinker for solventless polyaddition SILCOLEASE systems. | |
| SILCOLEASE XL 311 | Elkem Silicones | SILCOLEASE CROSSLINKER 311 is used as a crosslinker for solvent less polyaddition SILCOLEASE systems. Crosslinker 311 have a good balance between the fast curing speed and good anchorage. It could suit for different main polymer and different substrate, s...展开 SILCOLEASE CROSSLINKER 311 is used as a crosslinker for solvent less polyaddition SILCOLEASE systems. Crosslinker 311 have a good balance between the fast curing speed and good anchorage. It could suit for different main polymer and different substrate, such as Glassine, CCK, PEK, et. As special design corsslinker, it is good for PEK substrate curing at a not too high temperature. 收起 | |
| SILCOLEASE XL 320 | Elkem Silicones | SILCOLEASE CROSSLINKER 320 is a methyl hydrogen silicone polymer used as a crosslinker for solventless polyaddition SILCOLEASE systems. | |
| SILCOLEASE XL 321 | Elkem Silicones | SILCOLEASE CROSSLINKER 321 is a silicone polymer used as a crosslinker for solventless polyaddition SILCOLEASE systems. | |
| SILCOLEASE XL 325 | Elkem Silicones | SILCOLEASE XL 325 is a methyl hydrogen silicone polymeric based product used as a crosslinker for solventless polyaddition SILCOLEASE systems. | |
| SILCOLEASE XL 326 | Elkem Silicones | SILCOLEASE XL 326 and SILCOLEASE XL 328 are methyl hydrogen functional polysiloxane crosslinkers for platinum catalyzed addition cure solventless silicone release coatings. Designed for use in the Optima system, these products offer the capability to sign...展开 SILCOLEASE XL 326 and SILCOLEASE XL 328 are methyl hydrogen functional polysiloxane crosslinkers for platinum catalyzed addition cure solventless silicone release coatings. Designed for use in the Optima system, these products offer the capability to significantly reduce platinum catalyst use without having to increase process temperatures or reduce line speeds. SILCOLEASE XL 326 and SILCOLEASE XL 328 contain both copolymer and homopolymer methyl hydrogen components and provide efficient cure with good adhesion to a variety of liner substrates along with stable release. 收起 | |
| SILCOLEASE XL 327 | Elkem Silicones | SILCOLEASE XL 327 is a methyl hydrogen silicone polymeric based product used as a crosslinker for solventless polyaddition SILCOLEASE systems. | |
| SILCOLEASE XL 328 | Elkem Silicones | SILCOLEASE XL 326 and SILCOLEASE XL 328 are methyl hydrogen functional polysiloxane crosslinkers for platinum catalyzed addition cure solventless silicone release coatings. Designed for use in the Optima system, these products offer the capability to si...展开 SILCOLEASE XL 326 and SILCOLEASE XL 328 are methyl hydrogen functional polysiloxane crosslinkers for platinum catalyzed addition cure solventless silicone release coatings. Designed for use in the Optima system, these products offer the capability to significantly reduce platinum catalyst use without having to increase process temperatures or reduce line speeds. SILCOLEASE XL 326 and SILCOLEASE XL 328 contain both copolymer and homopolymer methyl hydrogen components and provide efficient cure with good adhesion to a variety of liner substrates along with stable release. 收起 | |
| SILCOLEASE XL 90 A | Elkem Silicones | SILCOLEASE CROSSLINKER 90 A is a silicone polymer used as a crosslinker of the SILCOLEASE 7400 system. | |
| SILCOLEASE XL 91 A | Elkem Silicones | SILCOLEASE CROSSLINKER 91 A is a silicone polymer used as a crosslinker of the SILCOLEASE polyaddition solvent-based systems, for example SILCOLEASE 7410, SILCOLEASE 7420 and SILCOLEASE 7440. | |
| SILCOLEASE XL 92 A | Elkem Silicones | SILCOLEASE CROSSLINKER 92 A is a silicone polymer used as a crosslinker of the SILCOLEASE polyaddition solvent-based systems, for example SILCOLEASE 7410, SILCOLEASE 7420 and SILCOLEASE 7440. | |
| SILCOLEASE XL 96 A | Elkem Silicones | SILCOLEASE CROSSLINKER 96 A is a silicone polymer based reactive compound. It is used as a crosslinker in the solventless polyaddition SILCOLEASE systems. | |
| SILCOLEASE XL 97 A | Elkem Silicones | SILCOLEASE CROSSLINKER 97 A is a silicone polymer based reactive compound. It is used as a crosslinker in the solventless polyaddition SILCOLEASE systems. | |
| SILCOLEASE XL PC-50 | Elkem Silicones | SILCOLEASE PC-50 is an emulsion of methyl hydrogen polysiloxane crosslinker for use with both platinum catalyzed addition cure and tin catalyzed condensation cure emulsion release coatings. The methyl hydrogen polysiloxane in SILCOLEASE PC-31 is a copolym...展开 SILCOLEASE PC-50 is an emulsion of methyl hydrogen polysiloxane crosslinker for use with both platinum catalyzed addition cure and tin catalyzed condensation cure emulsion release coatings. The methyl hydrogen polysiloxane in SILCOLEASE PC-31 is a copolymer, while SILCOLEASE PC-868 is based on a methyl hydrogen polysiloxane homopolymer. SILCOLEASE PC-50 is a proprietary blend of two methyl hydrogen crosslinkers and is especially suited to work with troublesome substrates to provide superb anchorage of the cured silicone coating. The homopolymer and copolymer crosslinkers provide the flexibility of creating a range of crosslink matrices from a dense, tightly knit matrix to one that is comparatively open. With troublesome adhesives or substrates, release and anchorage improvements may be realized by an interchange of crosslinkers. 收起 |
