| AEPD™ VOX 1000 Multifunctional Neutralizer | Dow Consumer & Industrial Solutions 陶氏消费品及工业解决方案事业部 | AEPD™ VOX 1000中和胺能帮助您调配出零VOC(< 5克/升)的涂料，并不影响涂料本身的品质。它能够实现行业标杆产品AMP的全部功能，而且几乎没有任何气味。同时，和其他低VOC氨基醇相比，AEPD™ VOX 1000更为高效。 研磨时添加AEPD™ VOX 1000中和胺能够提高研磨分散的效率并降低分散剂的使用量。它的高沸点和低汽压使它特别适合于低VOC或零VOC涂料的调配，并且几乎完全去除胺类和氨气的气味。 推荐您在研磨和中和碱溶胀型增稠剂的调漆阶段使用本产品。 | |
| ALKATERGE®-E Nonvolatile Surface Active Agent | Dow Consumer & Industrial Solutions 陶氏消费品及工业解决方案事业部 | ALKATERGE ® -E为不挥发性表面活性剂，极易溶解于大多数有机液体，但只有极微溶于水。即使如此， ALKATERGE ® -E在水中的浓度为0.001％ （重量） 时也会降低其表面张力至约40达因每厘米。虽然它不降低矿物油的表面张力， 在矿物油中存在0.1％即可降低其对水的界面张力。 ALKATERGE ® -E会与无机酸反应生产盐，其中一些是水溶性的，并产生稳定的泡沫。无机酸或更初级的单碱有机酸的盐，是非常有效的润湿剂。在水性体系中这类盐可将恶唑啉环逐渐水解成酰胺结构。它生成油溶性...展开 ALKATERGE ® -E为不挥发性表面活性剂，极易溶解于大多数有机液体，但只有极微溶于水。即使如此， ALKATERGE ® -E在水中的浓度为0.001％ （重量） 时也会降低其表面张力至约40达因每厘米。虽然它不降低矿物油的表面张力， 在矿物油中存在0.1％即可降低其对水的界面张力。 ALKATERGE ® -E会与无机酸反应生产盐，其中一些是水溶性的，并产生稳定的泡沫。无机酸或更初级的单碱有机酸的盐，是非常有效的润湿剂。在水性体系中这类盐可将恶唑啉环逐渐水解成酰胺结构。它生成油溶性皂与高级脂肪酸。这些盐和肥皂的润湿能力，经常可通过添加醇或二醇来增加。 ALKATERGE ® -E的盐溶液可以用作纸和纺织工业的渗透剂，并且在金属清洁剂配方中使用。 收起 | |
| ALKATERGE®-T Surface Active Agent | Dow Consumer & Industrial Solutions 陶氏消费品及工业解决方案事业部 | ALKATERGE®-T表面活性剂仅微溶于水。在普通室温下，ALKATERGE®-T是一种蜡状固体，它在芳香族烃类和低级醇或酮中高度可溶，可中等程度溶于脂肪族烃，并与大多数植物油混溶。在液体状态，它与几乎所有的有机液体混溶。本产品作为表面活性剂是有用的，由事实证明，即在矿物油中0.1％即可降低对水界面的表面张力约95％，或至小于2达因/厘米。 ALKATERGE®-T已用作腐蚀抑制剂，乳化剂和分散剂用于各种应用中。当适当加入到配方中时，它通常可以同时执行所有这些功能，以及其它对特定体系的针对...展开 ALKATERGE®-T表面活性剂仅微溶于水。在普通室温下，ALKATERGE®-T是一种蜡状固体，它在芳香族烃类和低级醇或酮中高度可溶，可中等程度溶于脂肪族烃，并与大多数植物油混溶。在液体状态，它与几乎所有的有机液体混溶。本产品作为表面活性剂是有用的，由事实证明，即在矿物油中0.1％即可降低对水界面的表面张力约95％，或至小于2达因/厘米。 ALKATERGE®-T已用作腐蚀抑制剂，乳化剂和分散剂用于各种应用中。当适当加入到配方中时，它通常可以同时执行所有这些功能，以及其它对特定体系的针对性功能 收起 | |
| AMP™-75 Multifunctional Neutralizer | Dow Consumer & Industrial Solutions 陶氏消费品及工业解决方案事业部 | AMP™-75多功能中和剂被广泛认为是一种多功能添加剂，适用于所有类型的乳胶漆。在配方中，AMP™可以作为一个功能强大的助分散剂，以防止颜料的再聚集。同时，这对涂层的整体性能有显著好处。 为了充分利用AMP™作为助分散剂，高达30％的现有分散剂固体可由AMP™等重量代替。通常的添加量，AMP对配方总重量为0.05〜0.1％。典型的配方需要0.1〜0.3％的AMP™（总配方量）以获取最佳的pH稳定性，用于缔合增稠剂中和，消除罐内腐蚀。对于闪锈的控制，需要额外的0.1〜0.2％的AMP™（总配...展开 AMP™-75多功能中和剂被广泛认为是一种多功能添加剂，适用于所有类型的乳胶漆。在配方中，AMP™可以作为一个功能强大的助分散剂，以防止颜料的再聚集。同时，这对涂层的整体性能有显著好处。 为了充分利用AMP™作为助分散剂，高达30％的现有分散剂固体可由AMP™等重量代替。通常的添加量，AMP对配方总重量为0.05〜0.1％。典型的配方需要0.1〜0.3％的AMP™（总配方量）以获取最佳的pH稳定性，用于缔合增稠剂中和，消除罐内腐蚀。对于闪锈的控制，需要额外的0.1〜0.2％的AMP™（总配方量）。 收起 | |
| AMP™-90 Multifunctional Neutralizer | Dow Consumer & Industrial Solutions 陶氏消费品及工业解决方案事业部 | AMP™-90多功能中和剂氨基醇是一种无色，流动的液体，具有多种用途，可用于金属加工液，油漆和涂料，锅炉水系统和个人护理产品中。它可作为胺用于树脂中和，作为助分散剂，甲醛清除剂，腐蚀抑制剂和作为原料进行合成。 | |
| AMP™-95 Multifunctional Neutralizer | Dow Consumer & Industrial Solutions 陶氏消费品及工业解决方案事业部 | AMP™-95 多功能中和剂是乳胶漆行业的旗舰标杆性产品。作为一款多功能胺类，AMP与其他胺相比，更能提高涂料的品质并增强涂料的性能。 AMP-95以其中和性能和多功能表现得到了全世界配方设计师的广泛信任。它可以作为一种共分散剂并为配方提供出色的涂膜性能。AMP-95带来的主要益处包括改进的pH稳定性，优异的耐擦洗性，理想的固色性能，以及更好的光泽和遮盖力。 同时，AMP共分散剂和中和胺能够减少抗冻融剂、开罐时间延长剂和分散剂的使用，从而减少涂料中所含的有机挥发物。 | |
| Cinilex® DPP Orange SJ1C | CINIC Chemicals (Shanghai) Co., Ltd. | Cinilex® DPP Orange SJ1C is a highly opaque, high color strength, and saturated orange pigment. This product can provide high opacity, better flow, longer drying times, and high color strength. It is most commonly used in decorative, industrial, and selec...展开 Cinilex® DPP Orange SJ1C is a highly opaque, high color strength, and saturated orange pigment. This product can provide high opacity, better flow, longer drying times, and high color strength. It is most commonly used in decorative, industrial, and selected powder coating applications. 收起 | |
| Cinilex® DPP Red SR1C | CINIC Chemicals (Shanghai) Co., Ltd. | Cinilex® DPP Red SR1C is an opaque and highly weather resistant mid shade red organic pigment. This product can provide good chemical and solvent resistance and improve weather stability. It is most commonly used in architectural powder coating, coil coat...展开 Cinilex® DPP Red SR1C is an opaque and highly weather resistant mid shade red organic pigment. This product can provide good chemical and solvent resistance and improve weather stability. It is most commonly used in architectural powder coating, coil coating, baking paints, water-based paints, and industrial coating applications. 收起 | |
| Cinilex® DPP Red SR2P | CINIC Chemicals (Shanghai) Co., Ltd. | Cinilex® DPP Red SR2P is a high strength, highly resistant mid shade red organic pigment. This product can improve overpainting resistance and heat stability of the coatings. It is most commonly used in water based decorative coatings, powder coatings, an...展开 Cinilex® DPP Red SR2P is a high strength, highly resistant mid shade red organic pigment. This product can improve overpainting resistance and heat stability of the coatings. It is most commonly used in water based decorative coatings, powder coatings, and industrial coating applications. 收起 | |
| Cinilex® DPP Red ST | CINIC Chemicals (Shanghai) Co., Ltd. | Cinilex® DPP Red ST is an extremely transparent and saturated, high strength DPP based mid shade red organic pigment. This product can be used in conjunction with mica and aluminium pigments. It is most commonly used in car refinish applications, baking p...展开 Cinilex® DPP Red ST is an extremely transparent and saturated, high strength DPP based mid shade red organic pigment. This product can be used in conjunction with mica and aluminium pigments. It is most commonly used in car refinish applications, baking paints, nitrocellulose paints, and water-based paints. 收起 | |
| Cinilex® DPP Rubine SR5H | CINIC Chemicals (Shanghai) Co., Ltd. | Cinilex® DPP Rubine SR5H is a highly opaque, bluish red pigment. This product can provide outstanding light, weather, heat, overpainting and solvent resistance. It is most commonly used in baking paints, acid cured paints, water based paints, and coating ...展开 Cinilex® DPP Rubine SR5H is a highly opaque, bluish red pigment. This product can provide outstanding light, weather, heat, overpainting and solvent resistance. It is most commonly used in baking paints, acid cured paints, water based paints, and coating applications. 收起 | |
| Cinilex® DPP Rubine SR6T | CINIC Chemicals (Shanghai) Co., Ltd. | Cinilex® DPP Rubine SR6T is a transparent and saturated, highly weather resistant, DPP based blue shade red organic pigment. This product can be used in conjunction with mica and aluminium pigments. It is most commonly used in automotive OEM, car refinish...展开 Cinilex® DPP Rubine SR6T is a transparent and saturated, highly weather resistant, DPP based blue shade red organic pigment. This product can be used in conjunction with mica and aluminium pigments. It is most commonly used in automotive OEM, car refinish and commercial transportation applications. 收起 | |
| Cinilex® Red SR3C | CINIC Chemicals (Shanghai) Co., Ltd. | Cinilex® Red SR3C is a highly transparent, bluish red pigment. This product is most commonly used in automotive OEM, car refinish, and powder coating applications. | |
| Cinilex® Red SR4C | CINIC Chemicals (Shanghai) Co., Ltd. | Cinilex® Red SR4C is a highly transparent blush red pigment. This product can be used in conjunction with pearlescent and mica pigments. It is most commonly used in industrial coating and motorcycle paint applications. | |
| Cinilex® Yellow SY1H | CINIC Chemicals (Shanghai) Co., Ltd. | Cinilex® Yellow SY1H is a weather resistant, high performance, red shade organic yellow pigment. This product maintains its outstanding performance in highly reduced shades with titanium dioxide or other inorganic pigments. It is most commonly used in ind...展开 Cinilex® Yellow SY1H is a weather resistant, high performance, red shade organic yellow pigment. This product maintains its outstanding performance in highly reduced shades with titanium dioxide or other inorganic pigments. It is most commonly used in industrial, powder, decorative, automotive, and coil coating applications. 收起 | |
| Cinilex® Yellow SY2T | CINIC Chemicals (Shanghai) Co., Ltd. | Cinilex® Yellow SY2T is a transparent, weather resistant, isoindolinone based red shade yellow organic pigment. This product can be used in conjunction with mica and aluminium pigments. It is most commonly used in automotive OEM and car refinish applicati...展开 Cinilex® Yellow SY2T is a transparent, weather resistant, isoindolinone based red shade yellow organic pigment. This product can be used in conjunction with mica and aluminium pigments. It is most commonly used in automotive OEM and car refinish applications. 收起 | |
| DMAMP-80™ Multifunctional Neutralizer | Dow Consumer & Industrial Solutions 陶氏消费品及工业解决方案事业部 | DMAMP - 80™多功能中和剂是一种中和胺，适合油漆、涂料和水处理中使用。它可以作为一种乳化剂、腐蚀抑制剂、树脂增溶剂、生产发泡体的催化剂和表面处理稳定剂，以及和化学合成的原料。 | |
| ExBar™ 200 | Excalibar Minerals LLC | ExBar™ 200 is a raw mineral material that is manufactured from natural barium sulfate ore. This product is used in many different applications such as paints, adhesives and sealants. It has a median particle size of 15.0u and an oil absorption of 9. | |
| ExBar™ 325 | Excalibar Minerals LLC | ExBar™ 325 is a raw mineral material that is manufactured from natural barium sulfate ore. This product is used in many different applications such as paints, adhesives and sealants. It has a median particle size of 10.0u and an oil absorption of 10. | |
| ExBar™ 400 | Excalibar Minerals LLC | ExBar™ 400 is a raw mineral material that is manufactured from natural barium sulfate ore. This product is used in many different applications such as paints, adhesives and sealants. It has a median particle size of 8.0u and an oil absorption of 12. | |
| ExBar™ W 1 | Excalibar Minerals LLC | ExBar™ W 1 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 1 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 1u and an oil absorption of 15. 收起 | |
| ExBar™ W 2 | Excalibar Minerals LLC | ExBar™ W 2 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 2 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 2u and an oil absorption of 13. 收起 | |
| ExBar™ W 3 | Excalibar Minerals LLC | ExBar™ W 3 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 3 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 3u and an oil absorption of 13. 收起 | |
| ExBar™ W 325 | Excalibar Minerals LLC | ExBar™ W 325 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are pr...展开 ExBar™ W 325 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. 收起 | |
| ExBar™ W 4 | Excalibar Minerals LLC | ExBar™ W 4 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 4 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 4u and an oil absorption of 12. 收起 | |
| ExBar™ W 400 | Excalibar Minerals LLC | ExBar™ W 400 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are pr...展开 ExBar™ W 400 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 8u and an oil absorption of 10. 收起 | |
| ExCal® 100 | Excalibar Minerals LLC | ExCal® 100 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications. | |
| ExCal® 200 | Excalibar Minerals LLC | ExCal® 200 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications. | |
| ExCal® 325 | Excalibar Minerals LLC | ExCal® 325 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications. | |
| ExCal® 400 | Excalibar Minerals LLC | ExCal® 400 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications. | |
| ExCal® CW 100 | Excalibar Minerals LLC | ExCal® CW 100 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand ar...展开 ExCal® CW 100 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand are a standard. 收起 | |
| ExCal® CW 200 | Excalibar Minerals LLC | ExCal® CW 200 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand ar...展开 ExCal® CW 200 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand are a standard. 收起 | |
| ExCal® CW 325 | Excalibar Minerals LLC | ExCal® CW 325 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand ar...展开 ExCal® CW 325 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand are a standard. 收起 | |
| FLEXITANE™ CA 6000 Specialty Coating Additive | Dow Consumer & Industrial Solutions 陶氏消费品及工业解决方案事业部 | FLEXITANE™ CA 6000 是一种多功能、高性能的硝基烷烃类特种涂料添加剂。通过添加该多功效的助剂，通常可以减少油漆中其它高剂量的特种助剂的使用，为实现高性能的油性漆提供有效的解决方案 | |
| Michem® Dispersion 471 | Michelman | Michem® Dispersion 471 is a solvent dispersion of carnauba wax that has proven very effective for slip and abrasion resistance when used as an additive in the metal coatings industry. | |
| Michem® Emulsion 32535 | Michelman | Michem® Emulsion 32535 is a nonionic, polyethylene emulsion. This additive is best used in water based coatings where improved slip, rub resistance, hardness and / or block resistance is needed. It can be used as an additive to paper coatings, wood coatin...展开 Michem® Emulsion 32535 is a nonionic, polyethylene emulsion. This additive is best used in water based coatings where improved slip, rub resistance, hardness and / or block resistance is needed. It can be used as an additive to paper coatings, wood coatings, metal coatings, overprint varnishes, floor polish and other water based coatings where slip and hardness are required, without significant degradation of gloss. 收起 | |
| Michem® Emulsion 39235 | Michelman | Michem® Emulsion 39235 is a nonionic high density polyethylene emulsion. It is best used in water based coatings where improved slip, rub resistance, hardness and / or block resistance are needed. This wax emulsion can be used as an additive to paper coat...展开 Michem® Emulsion 39235 is a nonionic high density polyethylene emulsion. It is best used in water based coatings where improved slip, rub resistance, hardness and / or block resistance are needed. This wax emulsion can be used as an additive to paper coatings, wood coatings, metal coatings, overprint varnishes, floor polish and other markets where slip and hardness are required, without significant degradation of gloss. 收起 | |
| Michem® Emulsion 43040 | Michelman | Michem® Emulsion 43040 is a nonionic polypropylene emulsion that is effectively used as an additive for wood and overprint varnish formulations when a high degree of slip resistance is needed, as well as proving lubricity and mold release for industrial m...展开 Michem® Emulsion 43040 is a nonionic polypropylene emulsion that is effectively used as an additive for wood and overprint varnish formulations when a high degree of slip resistance is needed, as well as proving lubricity and mold release for industrial molding applications. 收起 | |
| Michem® Emulsion 47950 | Michelman | Michem® Emulsion 47950 is a nonionic paraffin emulsion that is effective as an anti-graffiti and sacrificial coating and can also contribute water resistance to industrial and wood coatings. This product also provides lubricity and serves as a mold releas...展开 Michem® Emulsion 47950 is a nonionic paraffin emulsion that is effective as an anti-graffiti and sacrificial coating and can also contribute water resistance to industrial and wood coatings. This product also provides lubricity and serves as a mold release for industrial molding applications. 收起 | |
| Michem® Emulsion 52137F | Michelman | Michem® Emulsion 52137F is a polyethylene emulsion which dries to form a high quality, transparent film with excellent elasticity. This enables it to be used in various applications such as leather treatment, mold release and seed coatings. | |
| Michem® Emulsion 62330 | Michelman | Michem® Emulsion 62330 is a fine particle sized emulsion that provides excellent water repellency, block resistance and lubricity when added to varnishes and other coatings, without affecting gloss. | |
| Michem® Emulsion 64230 | Michelman | Michem® Emulsion 64230 is a nonionic APEO free wax emulsion which dries to form a high quality, transparent film with excellent elasticity. This enables it to be used in various applications such as leather treatment, mold release and seed coatings. | |
| Michem® Emulsion 66035 | Michelman | Michem® Emulsion 66035 is an excellent waterbeading agent for exterior coatings providing early water beading and anti-blocking properties as well. It also is successfully used for hot tire scuff resistance in asphalt. | |
| Michem® Emulsion 71152 | Michelman | Michem® Emulsion 71152 is an anionic scale wax emulsion that provides excellent water resistance in paint and varnish applications. | |
| Michem® Emulsion 85250 | Michelman | Michem® Emulsion 85250 is a nonionic high solid wax emulsion which provides excellent rub resistance and high gloss for overprint varnish, water based printing inks and clear coatings. It provides excellent compatibility with most of the coating systems. | |
| Michem® Emulsion 87235 | Michelman | Michem® Emulsion 87235 is a wax emulsion which provides very good rub resistance and high gloss for over print varnish, water based printing inks and clear coatings. | |
| Michem® Emulsion 91240G | Michelman | Michem® Emulsion 91240G is a nonionic polyethylene emulsion. It provides excellent anti-blocking, scratch and mar resistance as well as gloss in inks, coatings and overprint varnishes. | |
| Michem® Emulsion 91735 | Michelman | Michem® Emulsion 91735 is a nonionic polypropylene emulsion and sizing polymer for fiberglass and other fibers used to reinforce polypropylene. It can also be used in paint & varnish and polish applications to impart durability, mar, slip and block resist...展开 Michem® Emulsion 91735 is a nonionic polypropylene emulsion and sizing polymer for fiberglass and other fibers used to reinforce polypropylene. It can also be used in paint & varnish and polish applications to impart durability, mar, slip and block resistance. 收起 | |
| Michem® Emulsion 91840M | Michelman | Michem® Emulsion 91840M is a wax emulsion which provides superior rub resistance and gloss when used as an additive in overprint varnishes, inks and coatings. It also provides very good anti-blocking, slip and mar resistance properties. | |
| Michem® Emulsion 93235 | Michelman | Michem® Emulsion 93235 is a nonionic polyethylene emulsion. This phenol free additive is best used in water based coatings where improved slip, rub resistance, hardness and/or block resistance is needed. It has proven very effective for mar resistance in ...展开 Michem® Emulsion 93235 is a nonionic polyethylene emulsion. This phenol free additive is best used in water based coatings where improved slip, rub resistance, hardness and/or block resistance is needed. It has proven very effective for mar resistance in floor polish formulations as well as mar resistance and shine in car polish formulations. 收起 | |
| Michem® Emulsion 94340 | Michelman | Michem® Emulsion 94340 is a phenol free additive best used in floor polish and overprint varnish formulations when a high degree of slip resistance is needed. It also provides durability and scratch resistance to wood applications. | |
| Michem® Emulsion 95535 | Michelman | Michem® Emulsion 95535 is an APEO free, nonionic, high density polyethylene emulsion best used in water based coatings where improved slip, rub resistance, hardness and / or block resistance is needed. It has proven to be very effective for mar resistance...展开 Michem® Emulsion 95535 is an APEO free, nonionic, high density polyethylene emulsion best used in water based coatings where improved slip, rub resistance, hardness and / or block resistance is needed. It has proven to be very effective for mar resistance in floor polish formulations as well as mar resistance and shine in car polish formulations. 收起 | |
| Michem® Guard 349 | Michelman | Michem® Guard 349 is a nonionic polyethylene dispersion designed to impart rub resistance, block resistance and matting properties to aqueous paints, coatings and inks. | |
| Michem® Guard 7140 | Michelman | Michem® Guard 7140 is a water-based, dispersion which improves blocking, rub and abrasion resistance, and matting in pigmented coatings and semi-gloss coatings, inks, and overprint varnishes and at very low addition rates. It also produces smooth satin fi...展开 Michem® Guard 7140 is a water-based, dispersion which improves blocking, rub and abrasion resistance, and matting in pigmented coatings and semi-gloss coatings, inks, and overprint varnishes and at very low addition rates. It also produces smooth satin finishes at 5-10% addition rates. 收起 | |
| Michem® Lube 124 | Michelman | Michem® Lube 124 is an anionic microcrystalline wax emulsion that provides release and acts as a detackifier for industrial moding applications. It is used successfully in latex glove formulations and also offers slip resistance for adhesives and sealants...展开 Michem® Lube 124 is an anionic microcrystalline wax emulsion that provides release and acts as a detackifier for industrial moding applications. It is used successfully in latex glove formulations and also offers slip resistance for adhesives and sealants. 收起 | |
| Michem® Lube 135 | Michelman | Michem® Lube 135 promotes water and mar resistance and anti-blocking properties when used as an additive in various coating formulations. This product has proven successful for rubber glove release as well as various paint and coatings applications. | |
| Michem® Lube 156 | Michelman | Michem® Lube 156 is a nonionic carnauba wax emulsion that is used in auto polishes, cosmetics, paints, coatings and graphic arts to increase scratch resistance, lubrication, release and anti-block properties. | |
| Michem® Lube 160 | Michelman | Michem® Lube 160 is an anionic carnauba wax emulsion which provides superior slip and mar resistance on a variety of substrates such as metal, wood, film and paper. It can also be used in thermal transfer release coatings to give release when used in comb...展开 Michem® Lube 160 is an anionic carnauba wax emulsion which provides superior slip and mar resistance on a variety of substrates such as metal, wood, film and paper. It can also be used in thermal transfer release coatings to give release when used in combination with a thermally active binder and offers broad FDA compliance. 收起 | |
| Michem® Lube 180 | Michelman | Michem® Lube 180 is an anionic co-emulsion of carnauba and paraffin waxes that provides slip, release and anti-blocking properties in a number of applications from wood coatings to synthetic and natural lattices. It also provides mar and scratch resistanc...展开 Michem® Lube 180 is an anionic co-emulsion of carnauba and paraffin waxes that provides slip, release and anti-blocking properties in a number of applications from wood coatings to synthetic and natural lattices. It also provides mar and scratch resistance and water repellence in varnishes and other coatings. 收起 | |
| Michem® Lube 182 | Michelman | Michem® Lube 182 provides slip, release and anti-block properties in a number of applications ranging from wood coatings to being blended with synthetic and natural lattices. It is also a mar and scratch resistant and water repellent additive in varnishes...展开 Michem® Lube 182 provides slip, release and anti-block properties in a number of applications ranging from wood coatings to being blended with synthetic and natural lattices. It is also a mar and scratch resistant and water repellent additive in varnishes and other coatings. This product is slightly higher in melt point than Michem® Lube 180. 收起 | |
| Michem® Lube 190 | Michelman | Michem® Lube 190 is an anionic polyethylene wax emulsion that provides mar, rub, block and scratch resistance as well as improved water resistance in coatings and graphic arts formulations. | |
| Michem® Lube 270R | Michelman | Michem® Lube 270R provides excellent water and block resistance in paint and coating formulations. This product is useful for long term water bead and for water repellency on wood as well as a tire dressing and buffability for auto care. | |
| Michem® Lube 743G | Michelman | Michem® Lube 743G is a nonionic paraffin wax emulsion, exhibiting a high degree of water resistance and block resistance this product is used in many water based coating applications. | |
| Michem® Lube 880 | Michelman | Michem® Lube 880 is a nonionic emulsion of a high density oxidized homopolymer. It is best used as an additive in water based coatings where improved slip, rub resistance, hardness and / or block resistance is needed. This wax emulsion can be used as an a...展开 Michem® Lube 880 is a nonionic emulsion of a high density oxidized homopolymer. It is best used as an additive in water based coatings where improved slip, rub resistance, hardness and / or block resistance is needed. This wax emulsion can be used as an additive to paper coatings, wood coatings, metal coatings, overprint varnishes and other water based coatings where slip and hardness are required, without significant degradation of gloss. 收起 | |
| Michem® Prime 498340R | Michelman | Michem® Prime 498340R is an ethylene acrylic acid dispersion. It provides outstanding adhesion to metallic and cellulosic substrates and enhances the water, grease, oil and solvent resistance of coatings and adhesives and is a high solids, more economical...展开 Michem® Prime 498340R is an ethylene acrylic acid dispersion. It provides outstanding adhesion to metallic and cellulosic substrates and enhances the water, grease, oil and solvent resistance of coatings and adhesives and is a high solids, more economical version of Michem® Prime 4983R. The adhesion properties of Michem® Prime facilitate its use as a primer for extrusion coatings. Utilizing this "tie coat" functionality, dissimilar materials can be combined to produce a substrate with the unique properties of each material. 收起 | |
| Michem® Prime 4983R | Michelman | Michem® Prime 4983R is an ethylene acrylic acid dispersion that provides outstanding adhesion to both metallic and cellulosic substrates, and enhances the water, grease, oil and solvent resistance of coatings and adhesives. Can serve as a tie coat or prim...展开 Michem® Prime 4983R is an ethylene acrylic acid dispersion that provides outstanding adhesion to both metallic and cellulosic substrates, and enhances the water, grease, oil and solvent resistance of coatings and adhesives. Can serve as a tie coat or primer for extrusion coatings, a foil laminate, a specialty paper coating, a paper sizing agent, a heat sealable coating, nonwoven binder and can also be used as a thermally active binder in thermal transfer release coatings. 收起 | |
| NatureShield® 30 | Michelman | NatureShield® 30 contains 99.5% natural ingredients. This additive imparts good water bead to seed, wood and concrete coatings. | |
| NatureShield® 40M | Michelman | NatureShield® 40M is a natural oil emulsion that imparts water resistance to wood and concrete. | |
| ProHere® E 00001 | Michelman | ProHere® E 00001 is a polyolefin-acrylic hybrid dispersion designed for formulating anti-corrosion primers and pre-treatment sealers for metallic substrates to provide excellent adhesion to various metallic substrates like steel, electroplated steel and a...展开 ProHere® E 00001 is a polyolefin-acrylic hybrid dispersion designed for formulating anti-corrosion primers and pre-treatment sealers for metallic substrates to provide excellent adhesion to various metallic substrates like steel, electroplated steel and aluminum. In addition, it provides excellent water resistance and chemical resistance to acids and many solvents. 收起 | |
| ProHere® E 00002 | Michelman | ProHere® E 00002 is a polyolefin-acrylic hybrid dispersion designed for formulating anti-corrosion primers and pre-treatment sealers for metallic substrates to provide excellent adhesion to various metallic substrates like steel, electroplated steel and a...展开 ProHere® E 00002 is a polyolefin-acrylic hybrid dispersion designed for formulating anti-corrosion primers and pre-treatment sealers for metallic substrates to provide excellent adhesion to various metallic substrates like steel, electroplated steel and aluminum. In addition, it provides excellent water resistance and chemical resistance to acids and many solvents. 收起 | |
| ProHere® E 00003 | Michelman | ProHere® E 00003 is a polyolefin-acrylic hybrid dispersion designed for formulating anti-corrosion primers and pre-treatment sealers for metallic substrates to provide excellent adhesion to various metallic substrates like steel, electroplated steel and a...展开 ProHere® E 00003 is a polyolefin-acrylic hybrid dispersion designed for formulating anti-corrosion primers and pre-treatment sealers for metallic substrates to provide excellent adhesion to various metallic substrates like steel, electroplated steel and aluminum. In addition, it provides excellent water resistance and chemical resistance to acids and many solvents. 收起 | |
| ProHere® E 00004 | Michelman | ProHere® E 00004 is a polyolefin-acrylic hybrid dispersion designed for formulating anti-corrosion primers and pre-treatment sealers for metallic substrates to provide excellent adhesion to various metallic substrates like steel, electroplated steel and a...展开 ProHere® E 00004 is a polyolefin-acrylic hybrid dispersion designed for formulating anti-corrosion primers and pre-treatment sealers for metallic substrates to provide excellent adhesion to various metallic substrates like steel, electroplated steel and aluminum. In addition, it provides excellent water resistance and chemical resistance to acids and many solvents. 收起 | |
| ProHere® E 00005 | Michelman | ProHere® E 00005 is a polyolefin-acrylic hybrid dispersion designed for formulating anti-corrosion primers and pre-treatment sealers for metallic substrates to provide excellent adhesion to various metallic substrates like steel, electroplated steel and a...展开 ProHere® E 00005 is a polyolefin-acrylic hybrid dispersion designed for formulating anti-corrosion primers and pre-treatment sealers for metallic substrates to provide excellent adhesion to various metallic substrates like steel, electroplated steel and aluminum. In addition, it provides excellent water resistance and chemical resistance to acids and many solvents. 收起 | |
| ProHere® E 00006 | Michelman | ProHere® E 00006 is a polyolefin-acrylic hybrid dispersion designed for formulating anti-corrosion primers and pre-treatment sealers for metallic substrates to provide excellent adhesion to various metallic substrates like steel, electroplated steel and a...展开 ProHere® E 00006 is a polyolefin-acrylic hybrid dispersion designed for formulating anti-corrosion primers and pre-treatment sealers for metallic substrates to provide excellent adhesion to various metallic substrates like steel, electroplated steel and aluminum. In addition, it provides excellent water resistance and chemical resistance to acids and many solvents. 收起 | |
| ProHere® E 00007 | Michelman | ProHere® E 00007 is a high solids water based binder designed for formulating anti-corrosion primers and pre-treatment sealers for metallic substrates to provide excellent adhesion to various metallic substrates like steel, electroplated steel and aluminu...展开 ProHere® E 00007 is a high solids water based binder designed for formulating anti-corrosion primers and pre-treatment sealers for metallic substrates to provide excellent adhesion to various metallic substrates like steel, electroplated steel and aluminum. In addition, it provides excellent water resistance and chemical resistance to acids and many solvents. 收起 | |
| ProHere® E 00009 | Michelman | ProHere® E 00009 is a polyolefin-acrylic hybrid dispersion. It is a high solids water based binder designed for formulating anti-corrosion primers and pre-treatment sealers for metallic substrates to provide excellent adhesion to various metallic substrat...展开 ProHere® E 00009 is a polyolefin-acrylic hybrid dispersion. It is a high solids water based binder designed for formulating anti-corrosion primers and pre-treatment sealers for metallic substrates to provide excellent adhesion to various metallic substrates like steel, electroplated steel and aluminum. In addition, it provides excellent water resistance and chemical resistance to acids and many solvents. 收起 | |
| ProHere® E 00010 | Michelman | ProHere® E 00010 is a polyolefin-acrylic hybrid dispersion. It is a high solids water based binder designed forformulating anti-corrosion primers and pre-treatment sealers for metallic substrates to provide excellent adhesion to various metallic substrate...展开 ProHere® E 00010 is a polyolefin-acrylic hybrid dispersion. It is a high solids water based binder designed forformulating anti-corrosion primers and pre-treatment sealers for metallic substrates to provide excellent adhesion to various metallic substrates like steel, electroplated steel and aluminum. In addition, it provides excellent water resistance and chemical resistance to acids and many solvents. 收起 | |
| ProHere® E 00011 | Michelman | ProHere® E 00011 is a polyolefin-acrylic hybrid dispersion which is designed for formulating anti-corrosion primers and pre-treatment sealers for metallic substrates to provide excellent adhesion to various metallic substrates like steel, electroplated st...展开 ProHere® E 00011 is a polyolefin-acrylic hybrid dispersion which is designed for formulating anti-corrosion primers and pre-treatment sealers for metallic substrates to provide excellent adhesion to various metallic substrates like steel, electroplated steel and aluminum. In addition, it provides excellent water resistance and chemical resistance to acids and many solvents. 收起 | |
| ProHere® E 00012 | Michelman | ProHere® E 00012 is a polyolefin-acrylic hybrid dispersion. It is a high solids water based binder designed for formulating anti-corrosion primers and pre-treatment sealers for metallic substrates to provide excellent adhesion to various metallic substrat...展开 ProHere® E 00012 is a polyolefin-acrylic hybrid dispersion. It is a high solids water based binder designed for formulating anti-corrosion primers and pre-treatment sealers for metallic substrates to provide excellent adhesion to various metallic substrates like steel, electroplated steel and aluminum. In addition, it provides excellent water resistance and chemical resistance to acids and many solvents. 收起 | |
| ProHere® E 00013 | Michelman | ProHere® E 00013 is a polyolefin-acrylic hybrid dispersion. It is a high solids water based binder designed for formulating anti-corrosion primers and pre-treatment sealers for metallic substrates to provide excellent adhesion to various metallic substrat...展开 ProHere® E 00013 is a polyolefin-acrylic hybrid dispersion. It is a high solids water based binder designed for formulating anti-corrosion primers and pre-treatment sealers for metallic substrates to provide excellent adhesion to various metallic substrates like steel, electroplated steel and aluminum. In addition, it provides excellent water resistance and chemical resistance to acids and many solvents. 收起 | |
| ProHere® I 13001 | Michelman | ProHere® I 13001 is a polyimide solution designed for metal coatings that need to deal with extremely high temperatures. It provides good adhesion, very high chemical resistance, very high mechanical strength and excellent high temperature resistance. | |
| ProHere® I 13002 | Michelman | ProHere® I 13002 is a polyimide solution designed for metal coatings that need to deal with extremely high temperatures. It provides good adhesion, very high chemical resistance, very high mechanical strength and excellent high temperature resistance. | |
| ProHere® L 90001 | Michelman | ProHere® L 90001 is an anionic paraffin/polyethylene emulsion that imparts lubricity and contributes to short term water resistance to metal coatings without affecting gloss. | |
| ProHere® L 90002 | Michelman | ProHere® L 90002 is a nonionic paraffin emulsion that imparts lubricity and contributes to short term water resistance to metal coatings without affecting gloss. | |
| ProHere® L 90003 | Michelman | ProHere® L 90003 is a nonionic paraffin wax emulsion that imparts lubricity and contributes to water resistance to metal coatings without affecting gloss. | |
| ProHere® L 90004 | Michelman | ProHere® L 90004 is a high solids emulsion which imparts lubricity and contributes to short term water resistance in metal coatings. | |
| ProHere® L 90006 | Michelman | ProHere® L 90006 is a nonionic polyethylene emulsion that imparts lubricity and block resistance to metal coatings. | |
| ProHere® L 90009 | Michelman | ProHere® L 90009 is a nonionic polyethylene emulsion that imparts abrasion resistance, enhanced lubricity, scratch resistance and torque/tension control to metal coatings. | |
| ProHere® L 90010 | Michelman | ProHere® L 90010 is an nonionic polyethylene emulsion for metal coatings which imparts abrasion resistance, block and scratch resistance, enhanced lubricity, and torque/tension control. | |
| ProHere® L 90011 | Michelman | ProHere® L 90011 is a nonionic polyethylene emulsion that imparts lubricity and scratch resistance for metal coatings. | |
| ProHere® L 90015 | Michelman | ProHere® L 90015 is an anionic polyethylene wax emulsion which provides mar, rub, block and scratch resistance as well as improved water resistance in metal coatings. | |
| ProHere® L 90016 | Michelman | ProHere® L 90016 is a nonionic polyethylene emulsion which is phenol and formaldehyde free and used in metal coating formulations for improved mar, scuff and chemical resistance. | |
| ProHere® L 90017 | Michelman | ProHere® L 90017 is a nonionic paraffin wax emulsion which provides excellent water repellency and block resistance when used in metal coating formulations. | |
| ProHere® L 90100 | Michelman | ProHere® L 90100 is an anionic polyethylene emulsion that imparts lubricity, scratch and abrasion resistance to metal coatings. | |
| ProHere® L 90101 | Michelman | ProHere® L 90101 is a nonionic microcrystalline wax emulsion that imparts lubricity to metal coatings. | |
| ProHere® L 90102 | Michelman | ProHere® L 90102 is an anionic microycrystalline wax emulsion that imparts lubricity to metal coatings. | |
| ProHere® L 90103 | Michelman | ProHere® L 90103 is a nonionic, polyethylene dispersion, that gives a matting effect to the surface of metal coatings. | |
| ProHere® L 90104 | Michelman | ProHere® L 90104 is a nonionic polypropylene emulsion that imparts scratch and abrasion resistance to metal coatings as well as increasing CoF. | |
| ProHere® L 90105 | Michelman | ProHere® L 90105 is a nonionic polypropylene emulsion which can be effectively used as an additive for metal applications to increase CoF and lubricity. | |
| ProHere® L 90109 | Michelman | ProHere® L 90109 is an anionic microcrystalline wax emulsion which acts as a release aid and detackifier for metal coatings. |
