UL Prospector

成功!

成功保存搜索结果
Request Sample Chlorinated PVC-YURON CPVC Yuron New Material 裕隆新材料 水相法低黏度过氯乙烯树脂是使用国际领先的水相悬浮法工艺, 把PVC树脂经氯气深度氯化所制成。在甲苯、二甲苯等多种芳烃、酮类溶剂中有良好的溶解性。这款产品有优异的耐酸,耐碱,耐候,耐水,耐油,耐寒, 阻燃性。可以与醇酸树脂、丙烯酸树脂、氯化橡胶树脂、高氯化聚乙烯树脂等多种树脂相溶。
Request Sample Chlorinated Polyolefin-YURON CP 10 Yuron New Material 裕隆新材料 YURON CP 10 is a white, chlorinated polyolefin powder for use as a binder for plastic or steel coatings. It has a specific gravity of 1.47-1.53.
Request Sample Chlorinated Polyolefin-YURON CP 20 Yuron New Material 裕隆新材料 YURON CP 20由氯化聚烯烃组成,以不溶于水的白色粉末形式供货。这款产品作为树脂推荐用于塑料或钢涂料
Request Sample Chlorinated Rubber-YURON CR 10 Yuron New Material 裕隆新材料 氯化橡胶是一种高硬度、粉末状的热塑性树脂,它具有优良的耐侯性、附着性、化学稳定性、耐盐水性和防紫外线性能。
Request Sample Chlorinated Rubber-YURON CR 20 Yuron New Material 裕隆新材料 氯化橡胶是一种高硬度、粉末状的热塑性树脂,它具有优良的耐侯性、附着性、化学稳定性、耐盐水性和防紫外线性能。
Request Sample Chlorinated Rubber-YURON CR-130 Yuron New Material 裕隆新材料 YURON CR-130是以白色粉末形式供货的氯化橡胶。它主要用作橡胶和金属应用的粘合剂原材料。这款产品溶于大多数芳香族溶剂,如甲苯或二甲苯中,还溶于大部分酯。
Request Sample Chlorinated Rubber-YURON CR-170 Yuron New Material 裕隆新材料 YURON CR-130以白色粉末形式供货的氯化橡胶。它主要用作橡胶和金属应用的粘合剂原材料。这款产品溶于大多数芳香族溶剂,如甲苯或二甲苯中,还溶于大部分酯,
Request Sample Chlorinated Rubber-YURON CR-22 Yuron New Material 裕隆新材料 YURON CR-22是一种氯化橡胶产品,以白色粉末形式供应。它主要添加到溶剂型粘合剂中。它可以溶解于多数芳香族溶剂中,如甲苯或二甲苯,同时可溶于大多数酯中。
Request Sample Chlorinated Rubber-YURON CR-40 Yuron New Material 裕隆新材料 YURON CR-40是一种以白色粉末形式供货的氯化橡胶,它用作防腐涂料或胶粘剂的树脂,也可以和醇酸树脂共用或在胶粘剂配方中和其他树脂共用。
Request Sample Chlorinated Rubber-YURON CR-400 Yuron New Material 裕隆新材料 YURON CR-400是一种氯化橡胶产品,以白色粉末形式供应。主要用于在橡胶和金属应用中使用的粘合剂原料中。它可以溶解于多数芳香族溶剂中,如甲苯或二甲苯,同时可溶于大多数酯中。
Request Sample Chlorinated Rubber-YURON CR-90 Yuron New Material 裕隆新材料 YURON CR-90是一种氯化橡胶,是不溶于水的白色粉末。它用作防腐涂料或胶粘剂的树脂,也可以和醇酸树脂共用或在胶粘剂配方中和其他树脂共用。
Cinilex® DPP Orange SJ1C CINIC Chemicals (Shanghai) Co., Ltd. Cinilex® DPP Orange SJ1C is a highly opaque, high color strength, and saturated orange pigment. This product can provide high opacity, better flow, longer drying times, and high color strength. It is most commonly used in decorative, industrial, and selec...展开 Cinilex® DPP Orange SJ1C is a highly opaque, high color strength, and saturated orange pigment. This product can provide high opacity, better flow, longer drying times, and high color strength. It is most commonly used in decorative, industrial, and selected powder coating applications. 收起
Cinilex® DPP Red SR1C CINIC Chemicals (Shanghai) Co., Ltd. Cinilex® DPP Red SR1C is an opaque and highly weather resistant mid shade red organic pigment. This product can provide good chemical and solvent resistance and improve weather stability. It is most commonly used in architectural powder coating, coil coat...展开 Cinilex® DPP Red SR1C is an opaque and highly weather resistant mid shade red organic pigment. This product can provide good chemical and solvent resistance and improve weather stability. It is most commonly used in architectural powder coating, coil coating, baking paints, water-based paints, and industrial coating applications. 收起
Cinilex® DPP Red SR2P CINIC Chemicals (Shanghai) Co., Ltd. Cinilex® DPP Red SR2P is a high strength, highly resistant mid shade red organic pigment. This product can improve overpainting resistance and heat stability of the coatings. It is most commonly used in water based decorative coatings, powder coatings, an...展开 Cinilex® DPP Red SR2P is a high strength, highly resistant mid shade red organic pigment. This product can improve overpainting resistance and heat stability of the coatings. It is most commonly used in water based decorative coatings, powder coatings, and industrial coating applications. 收起
Cinilex® DPP Red ST CINIC Chemicals (Shanghai) Co., Ltd. Cinilex® DPP Red ST is an extremely transparent and saturated, high strength DPP based mid shade red organic pigment. This product can be used in conjunction with mica and aluminium pigments. It is most commonly used in car refinish applications, baking p...展开 Cinilex® DPP Red ST is an extremely transparent and saturated, high strength DPP based mid shade red organic pigment. This product can be used in conjunction with mica and aluminium pigments. It is most commonly used in car refinish applications, baking paints, nitrocellulose paints, and water-based paints. 收起
Cinilex® DPP Rubine SR5H CINIC Chemicals (Shanghai) Co., Ltd. Cinilex® DPP Rubine SR5H is a highly opaque, bluish red pigment. This product can provide outstanding light, weather, heat, overpainting and solvent resistance. It is most commonly used in baking paints, acid cured paints, water based paints, and coating ...展开 Cinilex® DPP Rubine SR5H is a highly opaque, bluish red pigment. This product can provide outstanding light, weather, heat, overpainting and solvent resistance. It is most commonly used in baking paints, acid cured paints, water based paints, and coating applications. 收起
Cinilex® DPP Rubine SR6T CINIC Chemicals (Shanghai) Co., Ltd. Cinilex® DPP Rubine SR6T is a transparent and saturated, highly weather resistant, DPP based blue shade red organic pigment. This product can be used in conjunction with mica and aluminium pigments. It is most commonly used in automotive OEM, car refinish...展开 Cinilex® DPP Rubine SR6T is a transparent and saturated, highly weather resistant, DPP based blue shade red organic pigment. This product can be used in conjunction with mica and aluminium pigments. It is most commonly used in automotive OEM, car refinish and commercial transportation applications. 收起
Cinilex® Red SR3C CINIC Chemicals (Shanghai) Co., Ltd. Cinilex® Red SR3C is a highly transparent, bluish red pigment. This product is most commonly used in automotive OEM, car refinish, and powder coating applications.
Cinilex® Red SR4C CINIC Chemicals (Shanghai) Co., Ltd. Cinilex® Red SR4C is a highly transparent blush red pigment. This product can be used in conjunction with pearlescent and mica pigments. It is most commonly used in industrial coating and motorcycle paint applications.
Cinilex® Yellow SY1H CINIC Chemicals (Shanghai) Co., Ltd. Cinilex® Yellow SY1H is a weather resistant, high performance, red shade organic yellow pigment. This product maintains its outstanding performance in highly reduced shades with titanium dioxide or other inorganic pigments. It is most commonly used in ind...展开 Cinilex® Yellow SY1H is a weather resistant, high performance, red shade organic yellow pigment. This product maintains its outstanding performance in highly reduced shades with titanium dioxide or other inorganic pigments. It is most commonly used in industrial, powder, decorative, automotive, and coil coating applications. 收起
Cinilex® Yellow SY2T CINIC Chemicals (Shanghai) Co., Ltd. Cinilex® Yellow SY2T is a transparent, weather resistant, isoindolinone based red shade yellow organic pigment. This product can be used in conjunction with mica and aluminium pigments. It is most commonly used in automotive OEM and car refinish applicati...展开 Cinilex® Yellow SY2T is a transparent, weather resistant, isoindolinone based red shade yellow organic pigment. This product can be used in conjunction with mica and aluminium pigments. It is most commonly used in automotive OEM and car refinish applications. 收起
ExBar™ 200 Excalibar Minerals LLC ExBar™ 200 is a raw mineral material that is manufactured from natural barium sulfate ore. This product is used in many different applications such as paints, adhesives and sealants. It has a median particle size of 15.0u and an oil absorption of 9.
ExBar™ 325 Excalibar Minerals LLC ExBar™ 325 is a raw mineral material that is manufactured from natural barium sulfate ore. This product is used in many different applications such as paints, adhesives and sealants. It has a median particle size of 10.0u and an oil absorption of 10.
ExBar™ 400 Excalibar Minerals LLC ExBar™ 400 is a raw mineral material that is manufactured from natural barium sulfate ore. This product is used in many different applications such as paints, adhesives and sealants. It has a median particle size of 8.0u and an oil absorption of 12.
ExBar™ W 1 Excalibar Minerals LLC ExBar™ W 1 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 1 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 1u and an oil absorption of 15. 收起
ExBar™ W 2 Excalibar Minerals LLC ExBar™ W 2 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 2 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 2u and an oil absorption of 13. 收起
ExBar™ W 3 Excalibar Minerals LLC ExBar™ W 3 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 3 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 3u and an oil absorption of 13. 收起
ExBar™ W 325 Excalibar Minerals LLC ExBar™ W 325 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are pr...展开 ExBar™ W 325 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. 收起
ExBar™ W 4 Excalibar Minerals LLC ExBar™ W 4 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 4 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 4u and an oil absorption of 12. 收起
ExBar™ W 400 Excalibar Minerals LLC ExBar™ W 400 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are pr...展开 ExBar™ W 400 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 8u and an oil absorption of 10. 收起
ExCal® 100 Excalibar Minerals LLC ExCal® 100 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications.
ExCal® 200 Excalibar Minerals LLC ExCal® 200 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications.
ExCal® 325 Excalibar Minerals LLC ExCal® 325 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications.
ExCal® 400 Excalibar Minerals LLC ExCal® 400 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications.
ExCal® CW 100 Excalibar Minerals LLC ExCal® CW 100 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand ar...展开 ExCal® CW 100 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand are a standard. 收起
ExCal® CW 200 Excalibar Minerals LLC ExCal® CW 200 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand ar...展开 ExCal® CW 200 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand are a standard. 收起
ExCal® CW 325 Excalibar Minerals LLC ExCal® CW 325 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand ar...展开 ExCal® CW 325 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand are a standard. 收起
Request Sample High Chlorinated Polyethylene-YURON HCPE Yuron New Material 裕隆新材料 高氯化聚乙烯主要用于制造阻燃性、耐磨的重防腐涂料。可广泛应用于化工设备、油田管道、海洋设施、船舶、冶金矿山、盐业、渔场、三废处理、电力设备、集装箱等行业中。
Request Sample High Chlorinated Polyethylene-YURON HCPE-M Yuron New Material 裕隆新材料 高氯化聚乙烯主要用于制造阻燃性、耐磨的重防腐涂料。可广泛应用于化工设备、油田管道、海洋设施、船舶、冶金矿山、盐业、渔场、三废处理、电力设备、集装箱等行业中。
Request Sample High Performance High Chlorinated Polyethylene-YURON HPE 1305 Yuron New Material 裕隆新材料 高性能高氯化聚乙烯主要用于制造阻燃性、耐磨的重防腐涂料,高档粘接剂、高级油墨,在涂料方面,可广泛应用于化工设备,油田管道、海洋设施、船舶、冶金矿山、盐业、渔场、三废处理、交通道路、集装箱、电力设备等行业上。
Request Sample High Performance High Chlorinated Polyethylene-YURON HPE 1505 Yuron New Material 裕隆新材料 YURON HPE1505是一种高性能,高氯化的聚乙烯。它为白色粉末,并可混溶于水。此产品主要用于加强耐磨损性能和耐强腐蚀性,用于生产自熄性涂料和高质量印刷油墨。
Request Sample High Performance High Chlorinated Polyethylene-YURON HPE 1510 Yuron New Material 裕隆新材料 高性能高氯化聚乙烯主要用于制造阻燃性、耐磨的重防腐涂料,高档粘接剂、高级油墨,在涂料方面,可广泛应用于化工设备,油田管道、海洋设施、船舶、冶金矿山、盐业、渔场、三废处理、交通道路、集装箱、电力设备等行业上。
Request Sample High Performance High Chlorinated Polyethylene-YURON HPE 1515 Yuron New Material 裕隆新材料 高性能高氯化聚乙烯主要用于制造阻燃性、耐磨的重防腐涂料,高档粘接剂、高级油墨,在涂料方面,可广泛应用于化工设备,油田管道、海洋设施、船舶、冶金矿山、盐业、渔场、三废处理、交通道路、集装箱、电力设备等行业上。
RF 1120 A/B Resin Formulators (E.V. Roberts) RF 1120 A/B is a two-part epoxy adhesive system for bonding a wide variety of substrates. This product is thixotropic, and so can be used on vertical surfaces without excessive run out from the bond line. RF 1120 is also supplied in a one part premixed an...展开 RF 1120 A/B is a two-part epoxy adhesive system for bonding a wide variety of substrates. This product is thixotropic, and so can be used on vertical surfaces without excessive run out from the bond line. RF 1120 is also supplied in a one part premixed and frozen form. RF 1120 Blue is manufactured to MT-5-20. 收起
RF 1141 A/B Resin Formulators (E.V. Roberts) RF 1141 A/B is a two-part low-density epoxy syntactic system. It is qualified to SCGMS 58001, Type 2, Class 1 or Class 2. This product is slightly thixotropic, and so can be used on vertical surfaces without excessive run out. RF 1141 can be supplied in S...展开 RF 1141 A/B is a two-part low-density epoxy syntactic system. It is qualified to SCGMS 58001, Type 2, Class 1 or Class 2. This product is slightly thixotropic, and so can be used on vertical surfaces without excessive run out. RF 1141 can be supplied in Semkits. 收起
RF 1144 A/B Kit Resin Formulators (E.V. Roberts) RF 1144 A/B Kit is a two-part heat cured, low density, high strength, syntactic system that is formulated for continuous service at high temperatures. RF 1144 has excellent mechanical properties up to 350°F.
RF 1366 Resin Formulators (E.V. Roberts) RF 1366 is a medium viscosity standard epoxy resin designed for potting, encapsulating and filament winding. It can be used with a wide variety of curing agents to generate products with a broad range of work lives, cure conditions and mechanical properti...展开 RF 1366 is a medium viscosity standard epoxy resin designed for potting, encapsulating and filament winding. It can be used with a wide variety of curing agents to generate products with a broad range of work lives, cure conditions and mechanical properties. This system can be cured in high humidity and low temperatures and produces a hard glossy surface. RF 1366 offers very good wet out and can produce a high strength laminate. In addition, this resin can be used for coating, potting and encapsulating small electronic components and exhibits good electrical properties. 收起
RF 1386 A/B Kit Resin Formulators (E.V. Roberts) RF 1386 A/B Kit is a two-part, thixotropic, high strength epoxy adhesive system designed for use in food packaging and water filtration applications and meets the requirements of provision 21 CFR 175.105. The raw materials used in RF 1386 are listed for u...展开 RF 1386 A/B Kit is a two-part, thixotropic, high strength epoxy adhesive system designed for use in food packaging and water filtration applications and meets the requirements of provision 21 CFR 175.105. The raw materials used in RF 1386 are listed for use in “Food Packaging Adhesive” applications and are classified as FDA Approved under the same provision. It has excellent wet out and can easily penetrate fibrous substrates. RF 1386 has exceptional adhesive strength to a wide variety of substrates, including membranes, separators and other material used in reverse osmosis. 收起
RF 1392 A/B Resin Formulators (E.V. Roberts) RF 1392 A/B is a medium fast curing toughened epoxy adhesive system for bonding a wide variety of substrates. This product is slightly thixotropic, and so can be used on vertical surfaces without excessive run out from the bond line. RF 1392 A/B has excel...展开 RF 1392 A/B is a medium fast curing toughened epoxy adhesive system for bonding a wide variety of substrates. This product is slightly thixotropic, and so can be used on vertical surfaces without excessive run out from the bond line. RF 1392 A/B has excellent adhesion to metal and plastic substrates as well as excellent water soak and environmental resistance. 收起
RF 1393 A/B Resin Formulators (E.V. Roberts) RF 1393 A/B is a medium fast curing toughened epoxy adhesive system for bonding a wide variety of substrates. This product is slightly thixotropic, and so can be used on vertical surfaces without excessive run out from the bond line. RF 1393 A/B has excel...展开 RF 1393 A/B is a medium fast curing toughened epoxy adhesive system for bonding a wide variety of substrates. This product is slightly thixotropic, and so can be used on vertical surfaces without excessive run out from the bond line. RF 1393 A/B has excellent adhesion to metal and plastic substrates as well as excellent water soak and environmental resistance. RF 1393 A/B has been used to bond Fluorocarbon sheeting to steel structures. 收起
RF 14 Resin Formulators (E.V. Roberts) RF 14 is a standard polyamine (TETA) curing agent for use with liquid epoxy resins. It provides rapid cures at ambient temperature, excellent chemical resistance and intermediate temperature resistance. Compared with DETA, it has a lower vapor pressure, i...展开 RF 14 is a standard polyamine (TETA) curing agent for use with liquid epoxy resins. It provides rapid cures at ambient temperature, excellent chemical resistance and intermediate temperature resistance. Compared with DETA, it has a lower vapor pressure, is somewhat less hygroscopic and does not carbamate as readily. 收起
RF 1591BK A/B Resin Formulators (E.V. Roberts) RF 1591BK A/B is a low viscosity potting system. This system will meet the UL 94V-0 burn test as a self-extinguishing system. RF 1591BK A/B has good thermal conductivity, chemical and thermal shock resistance. It has very good adhesion to a variety of sub...展开 RF 1591BK A/B is a low viscosity potting system. This system will meet the UL 94V-0 burn test as a self-extinguishing system. RF 1591BK A/B has good thermal conductivity, chemical and thermal shock resistance. It has very good adhesion to a variety of substrates. 收起
RF 1710 A/B Resin Formulators (E.V. Roberts) RF 1710 A/B is a two-component polyurethane rigid foam system. It was formulated to resist high temperatures. It is also CFC free. This resin system is used whenever rigid closed cell foam is needed. Applications include thermal insulation of pipes, tanks...展开 RF 1710 A/B is a two-component polyurethane rigid foam system. It was formulated to resist high temperatures. It is also CFC free. This resin system is used whenever rigid closed cell foam is needed. Applications include thermal insulation of pipes, tanks, and panels. 收起
RF 1902 (AS) A/B Kit Resin Formulators (E.V. Roberts) RF 1902 (AS) A/B Kit is a low viscosity, low density, epoxy system designed for potting and encapsulating. This product is pourable when mixed and will cure at room temperature. This system will bond to a wide variety of substrates. Castings can be machin...展开 RF 1902 (AS) A/B Kit is a low viscosity, low density, epoxy system designed for potting and encapsulating. This product is pourable when mixed and will cure at room temperature. This system will bond to a wide variety of substrates. Castings can be machined or sanded within 16 to 24 hours. 收起
RF 2388 1-Component Resin Formulators (E.V. Roberts) RF 2388 is a 1-Component anti-corrosion paste adhesive system for aluminum substrates with excellent high temperature properties.
RF 24 Resin Formulators (E.V. Roberts) RF 24 is a cycloaliphatic amine curing agent used to cure various epoxy resins at elevated temperatures. This particular curing agent offers light color, low viscosity, long pot life and high glass transition temperature (Tg). Because of its light color, ...展开 RF 24 is a cycloaliphatic amine curing agent used to cure various epoxy resins at elevated temperatures. This particular curing agent offers light color, low viscosity, long pot life and high glass transition temperature (Tg). Because of its light color, absence of staining and excellent physical properties, it is recommended has a replacement for aromatic amines. 收起
RF 2869 Mod 2 Resin Formulators (E.V. Roberts) RF 2869 Mod 2 is a one-part, silver filled, electrically conductive epoxy adhesive. This system does not require mixing or vacuum degassing. Cure is achieved at temperatures as low as 82°C (180°F) for one hour or a short dwell at 121°C (250°F) for three m...展开 RF 2869 Mod 2 is a one-part, silver filled, electrically conductive epoxy adhesive. This system does not require mixing or vacuum degassing. Cure is achieved at temperatures as low as 82°C (180°F) for one hour or a short dwell at 121°C (250°F) for three minutes. Because RF 2869 Mod 2 is already vacuum degassed during manufacturing and no mixing is required, a void free casting or bond line is easily achieved. When cured, this adhesive will have very high thermal and electrical conductive properties. 收起
RF 2969 (Mod 4) A/B Kit Resin Formulators (E.V. Roberts) RF 2969 (Mod 4) A/B Kit is a thixotropic, high strength epoxy adhesive system with good physical strength and high electrical conductivity. This material is designed where hot solder applications are impractical or on parts which cannot be subjected to h...展开 RF 2969 (Mod 4) A/B Kit is a thixotropic, high strength epoxy adhesive system with good physical strength and high electrical conductivity. This material is designed where hot solder applications are impractical or on parts which cannot be subjected to heat. RF 2969 (Mod 4) is also effective as a shielding material. Open working time is 45 minutes and full cure is achieved in 24 hours at room temperature. 收起
RF 2970 A/B Resin Formulators (E.V. Roberts) RF 2970 A/B is a thixotropic, fast setting, high strength epoxy adhesive with good physical strength and high electrical conductivity. This material is designed for applications where hot solder applications are impractical or on parts which cannot be sub...展开 RF 2970 A/B is a thixotropic, fast setting, high strength epoxy adhesive with good physical strength and high electrical conductivity. This material is designed for applications where hot solder applications are impractical or on parts which cannot be subjected to heat. 收起
RF 30 Resin Formulators (E.V. Roberts) RF 35 is a di-functional polyglycol amine curing agent used to cure various epoxy resins at elevated temperatures. This particular curing agent offers light color, low viscosity, long pot life, high elongation and excellent thermal shock resistance.
RF 3000 Resin Formulators (E.V. Roberts) RF 3000 is a modified low viscosity Bisphenol A epoxy resin. It has viscosity of 500-700 cps at 77°F.
RF 32 Resin Formulators (E.V. Roberts) RF 35 is a modified aromatic amine. It offers long pot life coupled with rapid cure response. RF 32 is non-staining and has physical properties and chemical resistances equivalent to MDA cured resins.
RF 4010 Resin Formulators (E.V. Roberts) RF 4010 is medium viscosity modified bisphenol A epoxy. It is suitable for laminating, potting and RTM applications. The diluent in RF 4010 was chosen to minimize the effect on Tg, chemical resistance and reduce skin irritation. It does not contain butyl ...展开 RF 4010 is medium viscosity modified bisphenol A epoxy. It is suitable for laminating, potting and RTM applications. The diluent in RF 4010 was chosen to minimize the effect on Tg, chemical resistance and reduce skin irritation. It does not contain butyl glycidyl ether (BGE) or cresyl glycidyl ether (CGE). The cured properties of RF 4010 will depend on the choice of hardener. 收起
RF 4407 Resin Formulators (E.V. Roberts) RF 4407 is a filled epoxy resin designed for potting or casting applications. Various curing agents can be used to achieve particular end properties. Regardless of which curing agent is used, the end product will be a thermally conductive plastic. RF 4407...展开 RF 4407 is a filled epoxy resin designed for potting or casting applications. Various curing agents can be used to achieve particular end properties. Regardless of which curing agent is used, the end product will be a thermally conductive plastic. RF 4407 can be colored with any of the RF color concentrates. RF 4407-130 is colored black, RF 4407-139 is the white version. RF 4408 is the thixotropic version of RF 4407 when a soft paste is required prior to cure. 收起
RF 46 Resin Formulators (E.V. Roberts) RF 46 is a standard, medium viscosity, polyamide resin for ambient curing of epoxy resins. It is intended as an equivalent “drop-in” for Versamid 125 and can be used without formulation changes. When mixed at stoichiometric ratios it cures to hard, durabl...展开 RF 46 is a standard, medium viscosity, polyamide resin for ambient curing of epoxy resins. It is intended as an equivalent “drop-in” for Versamid 125 and can be used without formulation changes. When mixed at stoichiometric ratios it cures to hard, durable, moisture and chemical resistant plastics. The ratios can be extended to 1:1 by weight to improve flexibility. 收起
RF 47 Resin Formulators (E.V. Roberts) RF 47 is a standard, medium viscosity, polyamide resins for ambient curing of epoxy resins. They are intended as equivalent “drop-ins” for Versamid 125 and can be used without formulation changes. When mixed at stoichiometric ratios they cure to hard, dur...展开 RF 47 is a standard, medium viscosity, polyamide resins for ambient curing of epoxy resins. They are intended as equivalent “drop-ins” for Versamid 125 and can be used without formulation changes. When mixed at stoichiometric ratios they cure to hard, durable, moisture and chemical resistant plastics. The ratios can be extended to 1:1 by weight to improve flexibility. RF 47 complies with FDA 21 CFR 175.300, 21 CFR 176.170 and 21 CFR 175.105. RF 46 is a TETA free version of RF 47. 收起
RF 5000 Resin Formulators (E.V. Roberts) RF 5000 is a standard viscosity Bisphenol A epoxy resin. It has a viscosity of 11,000-15,000 cps at 77°F.
RF 5061 A/B Kit Resin Formulators (E.V. Roberts) RF 5061 A/B Kit is a two-part, semi-thixotropic epoxy paste designed for bonding soft, semi-porous materials such as wood, ceramic or composites. RF 5061 (Mod 1) and (Mod 2) are accelerated versions of RF 5061 that reduce fixturing time. When heated to 15...展开 RF 5061 A/B Kit is a two-part, semi-thixotropic epoxy paste designed for bonding soft, semi-porous materials such as wood, ceramic or composites. RF 5061 (Mod 1) and (Mod 2) are accelerated versions of RF 5061 that reduce fixturing time. When heated to 150°F, RF 5061 (Mod 1) can be handled and machined after 15-20 minutes. 收起
RF 53 Resin Formulators (E.V. Roberts) RF 53 is a bi-cyclic anhydride that offers exceptionally long pot life and very high Tg. It cures into a highly temperature resistant plastic and it used for high temperature filament winding and RTM/VARTM applications. RF 53 requires a suitable accelerat...展开 RF 53 is a bi-cyclic anhydride that offers exceptionally long pot life and very high Tg. It cures into a highly temperature resistant plastic and it used for high temperature filament winding and RTM/VARTM applications. RF 53 requires a suitable accelerator such as RF 22 or RF 80. 收起
RF 5407 Resin Formulators (E.V. Roberts) RF 5407 is an easy-to-use, aluminum oxide, liquid epoxy resin with excellent electrical insulation properties and high thermal conductivity. RF 5407 can be cured with nearly any hardener to produce a wide range of properties and cure cycles. Several poten...展开 RF 5407 is an easy-to-use, aluminum oxide, liquid epoxy resin with excellent electrical insulation properties and high thermal conductivity. RF 5407 can be cured with nearly any hardener to produce a wide range of properties and cure cycles. Several potential curing agents are listed below. Regardless of which curing agent is selected, the resultant plastic will have low shrinkage during cure, excellent thermal stability and conductivity, and be a strong and durable casting. 收起
RF 6002 Resin Formulators (E.V. Roberts) RF 6002 is a modified Novolac epoxy resin. It offers improved Tg and chemical resistance versus standard bisphenol A epoxies. RF 6002 has a medium-low viscosity and is suitable for laminating, RTM and filament winding applications. The handling and final ...展开 RF 6002 is a modified Novolac epoxy resin. It offers improved Tg and chemical resistance versus standard bisphenol A epoxies. RF 6002 has a medium-low viscosity and is suitable for laminating, RTM and filament winding applications. The handling and final cure properties can be adjusted by the choice of curing agent. 收起
RF 61 Resin Formulators (E.V. Roberts) RF 61 is a polyamide curing agent for use with various epoxy resins. This specific curing agent is designed to add toughness and flexibility to cured epoxy resins. It has very good adhesive strength characteristics and will bond with most substrates. Diff...展开 RF 61 is a polyamide curing agent for use with various epoxy resins. This specific curing agent is designed to add toughness and flexibility to cured epoxy resins. It has very good adhesive strength characteristics and will bond with most substrates. Different mix ratios will impart varying degrees of increasing flexibility to the cured systems. A mix with RF 61 will have at least a one hour pot life under normal conditions. Cure will take place at room temperature or, in small castings or adhesives, can be accelerated with heat. 收起
RF 6100 A/B Kit Resin Formulators (E.V. Roberts) RF 6100 A/B Kit is a medium viscosity, high temperature epoxy adhesive system for bonding metal and composite structures. RF 6100 has an open pot life of four hours and cures in one hour at 200°F.
RF 62 Resin Formulators (E.V. Roberts) RF 62 is a standard, high viscosity, polyamide resin for ambient curing of epoxy resins. It is intended as an equivalent “drop-in” for Versamid 115 and can be used without formulation changes. When mixed at stoichiometric ratio it cures to a tough, durabl...展开 RF 62 is a standard, high viscosity, polyamide resin for ambient curing of epoxy resins. It is intended as an equivalent “drop-in” for Versamid 115 and can be used without formulation changes. When mixed at stoichiometric ratio it cures to a tough, durable, moisture and chemical resistant plastic. RF 62 complies with FDA 21 CFR 175.300 and 21 CFR 175.105. 收起
RF 67 Resin Formulators (E.V. Roberts) RF 67 curing agent is a polyfunctional, fatty amidoamine for use in curing liquid epoxy resins. It is intended as an equivalent “drop-in” for Genamid 2000 and can be used without formulation changes. Special features of this room temperature curing agent ...展开 RF 67 curing agent is a polyfunctional, fatty amidoamine for use in curing liquid epoxy resins. It is intended as an equivalent “drop-in” for Genamid 2000 and can be used without formulation changes. Special features of this room temperature curing agent include relatively rapid cure rate, and the ability to cure in the presence of moisture. The mix ratio can be varied over a wide range to generate cured products that range from hard and rigid to soft and flexible. Appropriate applications include marine coatings, high-solids and solvent-free coatings, flooring, adhesives and laminates. It is approved for use in U.S. Navy Specification MILP-24441/Ships Coatings. 收起
RF 68 Resin Formulators (E.V. Roberts) RF 68 is a standard, low viscosity, fatty acid amidoamine resin for ambient curing of epoxy resins. It is intended as an equivalent “drop-in” for Genamid 250 and can be used without formulation changes. When mixed at stoichiometric ratio it cures to a har...展开 RF 68 is a standard, low viscosity, fatty acid amidoamine resin for ambient curing of epoxy resins. It is intended as an equivalent “drop-in” for Genamid 250 and can be used without formulation changes. When mixed at stoichiometric ratio it cures to a hard, durable, moisture and chemical resistant plastic. RF 68 is ideally suited for high solids formulations with low viscosity resins. It can be used in compliance with 21 CFR 175.300 and 21 CFR 176.170 as a component of FDA-compliant epoxy coatings, can cements and adhesives. 收起
RF 713 A/B Kit Resin Formulators (E.V. Roberts) RF 713 A/B Kit is a thixotropic epoxy adhesive system with good physical strength and high electrical conductivity. This material is designed to be used where hot solder applications are impractical or on parts which cannot be subjected to heat. RF 713 is...展开 RF 713 A/B Kit is a thixotropic epoxy adhesive system with good physical strength and high electrical conductivity. This material is designed to be used where hot solder applications are impractical or on parts which cannot be subjected to heat. RF 713 is also effective as a shielding material. 收起
RF 77 Resin Formulators (E.V. Roberts) RF 77 is a low-viscosity amine curing agent for use with liquid epoxy resins that provides rapid cure at ambient and temperatures as low as 32°F (0°C). It can also be used to accelerate other amine hardeners.
RF 81 Resin Formulators (E.V. Roberts) RF 81 is a unique low viscosity polyamide hardener. It is compatible with most epoxy resins without induction and offers a shorter gel time than standard polyamide hardeners.
RF 825 A/B Resin Formulators (E.V. Roberts) RF 825 A/B is a two component Epoxy compound used for potting electronic packages, generally with vacuum impregnation techniques. It is a high temperature resistant, low out gassing material which has been used in high voltage devices in space.
RF 9 Resin Formulators (E.V. Roberts) RF 9 is an accelerated polyamide hardener. It offers better chemical resistance and a higher service temperature than standard polyamides.
RF 912 A/B Kit Resin Formulators (E.V. Roberts) RF 912 A/B Kit is a high strength epoxy adhesive system for bonding a wide variety of substrates, including plastics. This product is thixotropic and can be used on vertical surfaces without excessive run out from the bond line. RF 912 has an open working...展开 RF 912 A/B Kit is a high strength epoxy adhesive system for bonding a wide variety of substrates, including plastics. This product is thixotropic and can be used on vertical surfaces without excessive run out from the bond line. RF 912 has an open working time of 30 to 45 minutes and will cure at room temperature. 收起
RF 913 A/B Resin Formulators (E.V. Roberts) RF 913 A/B is a toughened epoxy adhesive system for bonding a wide variety of substrates. This product is semi-thixotropic, and so can be used on vertical surfaces without excessive bleed from the bond line. RF 913 A/B has excellent adhesion to metal and ...展开 RF 913 A/B is a toughened epoxy adhesive system for bonding a wide variety of substrates. This product is semi-thixotropic, and so can be used on vertical surfaces without excessive bleed from the bond line. RF 913 A/B has excellent adhesion to metal and plastic substrates as well as excellent water soak and environmental resistance. RF 913 is available in green (blue/yellow) and black. An electrical grade is also available. 收起
RF 955 A/B Resin Formulators (E.V. Roberts) RF 955 A/B is an easy to mix, stiff paste, two-part, high strength, epoxy fairing compound. It is designed to hold up to a 1 inch peak before cure and is easily smoothed to a paintable surface. This high strength material bonds well to a wide variety of s...展开 RF 955 A/B is an easy to mix, stiff paste, two-part, high strength, epoxy fairing compound. It is designed to hold up to a 1 inch peak before cure and is easily smoothed to a paintable surface. This high strength material bonds well to a wide variety of substrates, including most metals and most rigid plastics. 收起
RF 96 Resin Formulators (E.V. Roberts) RF 96 curing agent is a modified cycloaliphatic amine designed for use with liquid epoxy resins. It also can be used to cure solid resins in solvent-based systems. RF 96 curing agent allows for cures at high humidity, low temperatures to 40 °F and underwa...展开 RF 96 curing agent is a modified cycloaliphatic amine designed for use with liquid epoxy resins. It also can be used to cure solid resins in solvent-based systems. RF 96 curing agent allows for cures at high humidity, low temperatures to 40 °F and underwater. 收起
RX 5004 A/B Kit Resin Formulators (E.V. Roberts) RX 5004 A/B Kit is a fast setting, non-slump, general purpose epoxy adhesive system for bonding a wide variety of substrates. RX 5004 sets in as little as 10 minutes with full cure in 24 hours at room temperature.
CHLORINATED RUBBER Road Marking Paint Suggested Formulation Yuron New Material 裕隆新材料 这是一款建议用于马路标线漆的配方。它包含50%的氯化橡胶甲苯溶液
Chlorinated Rubber High-Build Marine Coating (Base Coat) Yuron New Material 裕隆新材料 This formulation is used as the first coating on ships or steel construction. It has excellent water and corrosion resistance with outstanding durability.
Chlorinated Rubber High-Build Marine Coating (Top Coat) Yuron New Material 裕隆新材料 This formulation is used as protection and decoration on the hull, ship superstructure, freeboard, and other construction surfaces. It has excellent weather resistance, durability, and water resistance. The matching primer is aqueous phase chlorinated rub...展开 This formulation is used as protection and decoration on the hull, ship superstructure, freeboard, and other construction surfaces. It has excellent weather resistance, durability, and water resistance. The matching primer is aqueous phase chlorinated rubber primer or aqueous phase chlorinated rubber aluminum primer. 收起
YURON CR Prime Suggested Formulation Yuron New Material 裕隆新材料 氯化橡胶铁红底漆参考配方
YURON CR Topcoat Suggested Formulation Yuron New Material 裕隆新材料 氯化橡胶面漆参考配方
YURON HPE Prime Suggested Formulation Yuron New Material 裕隆新材料 高性能高氯化聚乙烯底漆参考配方
YURON HPE Road Marking Paint Suggested Formulation Yuron New Material 裕隆新材料 高性能高氯化聚乙烯马路标线漆参考配方
YURON HPE Topcoat Suggested Formulation Yuron New Material 裕隆新材料 高性能高氯化聚乙烯面漆参考配方