| Chlorinated Polyolefin-YURON CP 10 | Yuron New Material 裕隆新材料 | YURON CP 10 is a white, chlorinated polyolefin powder for use as a binder for plastic or steel coatings. It has a specific gravity of 1.47-1.53. | |
| Chlorinated Polyolefin-YURON CP 20 | Yuron New Material 裕隆新材料 | YURON CP 20由氯化聚烯烃组成，以不溶于水的白色粉末形式供货。这款产品作为树脂推荐用于塑料或钢涂料 | |
| Chlorinated PVC-YURON CPVC | Yuron New Material 裕隆新材料 | 水相法低黏度过氯乙烯树脂是使用国际领先的水相悬浮法工艺， 把PVC树脂经氯气深度氯化所制成。在甲苯、二甲苯等多种芳烃、酮类溶剂中有良好的溶解性。这款产品有优异的耐酸，耐碱，耐候，耐水，耐油，耐寒， 阻燃性。可以与醇酸树脂、丙烯酸树脂、氯化橡胶树脂、高氯化聚乙烯树脂等多种树脂相溶。 | |
| Chlorinated Rubber-YURON CR 10 | Yuron New Material 裕隆新材料 | 氯化橡胶是一种高硬度、粉末状的热塑性树脂，它具有优良的耐侯性、附着性、化学稳定性、耐盐水性和防紫外线性能。 | |
| Chlorinated Rubber-YURON CR 20 | Yuron New Material 裕隆新材料 | 氯化橡胶是一种高硬度、粉末状的热塑性树脂，它具有优良的耐侯性、附着性、化学稳定性、耐盐水性和防紫外线性能。 | |
| Chlorinated Rubber-YURON CR-130 | Yuron New Material 裕隆新材料 | YURON CR-130是以白色粉末形式供货的氯化橡胶。它主要用作橡胶和金属应用的粘合剂原材料。这款产品溶于大多数芳香族溶剂，如甲苯或二甲苯中，还溶于大部分酯。 | |
| Chlorinated Rubber-YURON CR-170 | Yuron New Material 裕隆新材料 | YURON CR-130以白色粉末形式供货的氯化橡胶。它主要用作橡胶和金属应用的粘合剂原材料。这款产品溶于大多数芳香族溶剂，如甲苯或二甲苯中，还溶于大部分酯， | |
| Chlorinated Rubber-YURON CR-22 | Yuron New Material 裕隆新材料 | YURON CR-22是一种氯化橡胶产品，以白色粉末形式供应。它主要添加到溶剂型粘合剂中。它可以溶解于多数芳香族溶剂中，如甲苯或二甲苯，同时可溶于大多数酯中。 | |
| Chlorinated Rubber-YURON CR-40 | Yuron New Material 裕隆新材料 | YURON CR-40是一种以白色粉末形式供货的氯化橡胶，它用作防腐涂料或胶粘剂的树脂，也可以和醇酸树脂共用或在胶粘剂配方中和其他树脂共用。 | |
| Chlorinated Rubber-YURON CR-400 | Yuron New Material 裕隆新材料 | YURON CR-400是一种氯化橡胶产品，以白色粉末形式供应。主要用于在橡胶和金属应用中使用的粘合剂原料中。它可以溶解于多数芳香族溶剂中，如甲苯或二甲苯，同时可溶于大多数酯中。 | |
| Chlorinated Rubber-YURON CR-90 | Yuron New Material 裕隆新材料 | YURON CR-90是一种氯化橡胶，是不溶于水的白色粉末。它用作防腐涂料或胶粘剂的树脂，也可以和醇酸树脂共用或在胶粘剂配方中和其他树脂共用。 | |
| Cinilex® DPP Orange SJ1C | CINIC Chemicals (Shanghai) Co., Ltd. | Cinilex® DPP Orange SJ1C is a highly opaque, high color strength, and saturated orange pigment. This product can provide high opacity, better flow, longer drying times, and high color strength. It is most commonly used in decorative, industrial, and selec...展开 Cinilex® DPP Orange SJ1C is a highly opaque, high color strength, and saturated orange pigment. This product can provide high opacity, better flow, longer drying times, and high color strength. It is most commonly used in decorative, industrial, and selected powder coating applications. 收起 | |
| Cinilex® DPP Red SR1C | CINIC Chemicals (Shanghai) Co., Ltd. | Cinilex® DPP Red SR1C is an opaque and highly weather resistant mid shade red organic pigment. This product can provide good chemical and solvent resistance and improve weather stability. It is most commonly used in architectural powder coating, coil coat...展开 Cinilex® DPP Red SR1C is an opaque and highly weather resistant mid shade red organic pigment. This product can provide good chemical and solvent resistance and improve weather stability. It is most commonly used in architectural powder coating, coil coating, baking paints, water-based paints, and industrial coating applications. 收起 | |
| Cinilex® DPP Red SR2P | CINIC Chemicals (Shanghai) Co., Ltd. | Cinilex® DPP Red SR2P is a high strength, highly resistant mid shade red organic pigment. This product can improve overpainting resistance and heat stability of the coatings. It is most commonly used in water based decorative coatings, powder coatings, an...展开 Cinilex® DPP Red SR2P is a high strength, highly resistant mid shade red organic pigment. This product can improve overpainting resistance and heat stability of the coatings. It is most commonly used in water based decorative coatings, powder coatings, and industrial coating applications. 收起 | |
| Cinilex® DPP Red ST | CINIC Chemicals (Shanghai) Co., Ltd. | Cinilex® DPP Red ST is an extremely transparent and saturated, high strength DPP based mid shade red organic pigment. This product can be used in conjunction with mica and aluminium pigments. It is most commonly used in car refinish applications, baking p...展开 Cinilex® DPP Red ST is an extremely transparent and saturated, high strength DPP based mid shade red organic pigment. This product can be used in conjunction with mica and aluminium pigments. It is most commonly used in car refinish applications, baking paints, nitrocellulose paints, and water-based paints. 收起 | |
| Cinilex® DPP Rubine SR5H | CINIC Chemicals (Shanghai) Co., Ltd. | Cinilex® DPP Rubine SR5H is a highly opaque, bluish red pigment. This product can provide outstanding light, weather, heat, overpainting and solvent resistance. It is most commonly used in baking paints, acid cured paints, water based paints, and coating ...展开 Cinilex® DPP Rubine SR5H is a highly opaque, bluish red pigment. This product can provide outstanding light, weather, heat, overpainting and solvent resistance. It is most commonly used in baking paints, acid cured paints, water based paints, and coating applications. 收起 | |
| Cinilex® DPP Rubine SR6T | CINIC Chemicals (Shanghai) Co., Ltd. | Cinilex® DPP Rubine SR6T is a transparent and saturated, highly weather resistant, DPP based blue shade red organic pigment. This product can be used in conjunction with mica and aluminium pigments. It is most commonly used in automotive OEM, car refinish...展开 Cinilex® DPP Rubine SR6T is a transparent and saturated, highly weather resistant, DPP based blue shade red organic pigment. This product can be used in conjunction with mica and aluminium pigments. It is most commonly used in automotive OEM, car refinish and commercial transportation applications. 收起 | |
| Cinilex® Red SR3C | CINIC Chemicals (Shanghai) Co., Ltd. | Cinilex® Red SR3C is a highly transparent, bluish red pigment. This product is most commonly used in automotive OEM, car refinish, and powder coating applications. | |
| Cinilex® Red SR4C | CINIC Chemicals (Shanghai) Co., Ltd. | Cinilex® Red SR4C is a highly transparent blush red pigment. This product can be used in conjunction with pearlescent and mica pigments. It is most commonly used in industrial coating and motorcycle paint applications. | |
| Cinilex® Yellow SY1H | CINIC Chemicals (Shanghai) Co., Ltd. | Cinilex® Yellow SY1H is a weather resistant, high performance, red shade organic yellow pigment. This product maintains its outstanding performance in highly reduced shades with titanium dioxide or other inorganic pigments. It is most commonly used in ind...展开 Cinilex® Yellow SY1H is a weather resistant, high performance, red shade organic yellow pigment. This product maintains its outstanding performance in highly reduced shades with titanium dioxide or other inorganic pigments. It is most commonly used in industrial, powder, decorative, automotive, and coil coating applications. 收起 | |
| Cinilex® Yellow SY2T | CINIC Chemicals (Shanghai) Co., Ltd. | Cinilex® Yellow SY2T is a transparent, weather resistant, isoindolinone based red shade yellow organic pigment. This product can be used in conjunction with mica and aluminium pigments. It is most commonly used in automotive OEM and car refinish applicati...展开 Cinilex® Yellow SY2T is a transparent, weather resistant, isoindolinone based red shade yellow organic pigment. This product can be used in conjunction with mica and aluminium pigments. It is most commonly used in automotive OEM and car refinish applications. 收起 | |
| Drobond™ 551 | D.R. Coats Ink & Resins Pvt. Ltd. | Drobond™ 551 is a Reddish yellow mobile liquid readily decomposed by water to form polymeric titanium compounds. It is supplied as a solution in isopropyl alcohol. | |
| Drocure™ 5130 | D.R. Coats Ink & Resins Pvt. Ltd. | Drocure™ 5130 is a versatile Lewis based catalyst for curing of Epoxy Resins. It is a technical grade of tris-(dimethylaminomethyl) phenol. | |
| Drodil™ 1210 | D.R. Coats Ink & Resins Pvt. Ltd. | Drodil™ 1210 (A.G.E) is a mono-glycidyl ether of C12-C14 fatty alcohol. | |
| Drodur™ L 75 | D.R. Coats Ink & Resins Pvt. Ltd. | Drodur™ L 75 is a liquid aromatic polyisocyanate based on toluene di-isocyanate. | |
| Droester™ 2751 | D.R. Coats Ink & Resins Pvt. Ltd. | Droester™ 2751 is a Penta Erythritol Esterified Rosin. | |
| Droester™ 2752 | D.R. Coats Ink & Resins Pvt. Ltd. | Droester™ 2752 is a Glycerine Esterified Rosin. | |
| Drokryl™ 1000 | D.R. Coats Ink & Resins Pvt. Ltd. | Drokryl™ 1000 is Thermoplastic Acrylic Resins with Excellent Flexibility and Yellowing Resistance. | |
| Drokryl™ 1001 | D.R. Coats Ink & Resins Pvt. Ltd. | Drokryl™ 1001 is Thermoplastic Acrylic Resins with Excellent Flexibility and Yellowing Resistance. | |
| Drokryl™ 7851 | D.R. Coats Ink & Resins Pvt. Ltd. | Drokryl™ 7851 is a hydroxyl functional Acrylic Resin formulated for cross linking with polyisocynates at ambient temperature. | |
| Drokryl™ 7862 | D.R. Coats Ink & Resins Pvt. Ltd. | Drokryl™ 7862 is a hydroxyl functional Acrylic Polyol Resin formulated for cross linking with polyisocyanate at ambient temperature. | |
| Drokyd™ 6010 | D.R. Coats Ink & Resins Pvt. Ltd. | Drokyd™ 6010 is short oil alkyd having 28% oil length. | |
| Drokyd™ 6020 | D.R. Coats Ink & Resins Pvt. Ltd. | Drokyd™ 6020 is short oil alkyd having 42% oil length. | |
| Drokyd™ 6030 | D.R. Coats Ink & Resins Pvt. Ltd. | Drokyd™ 6030 is long oil soya alkyd resin having 60% MTO tolerance. | |
| Drolite™ 9040 | D.R. Coats Ink & Resins Pvt. Ltd. | Drolite™ 9040 is a Phenalkamine used as curing agent for various Epoxy Resins. Specially for Marine coatings and other Industrial applications. | |
| Drolite™ 9041 | D.R. Coats Ink & Resins Pvt. Ltd. | Drolite™ 9041 is a Phenalkamine used as curing agent for various Epoxy Resins. Specially for Marine coatings and other Industrial applications. | |
| Dromal™ 2351 | D.R. Coats Ink & Resins Pvt. Ltd. | Dromal™ 2351 is Rosin modified Maleic Resin. | |
| Dromal™ 2354 | D.R. Coats Ink & Resins Pvt. Ltd. | Dromal™ 2354 is Rosin modified Maleic Resin. | |
| Dromel™ 103 | D.R. Coats Ink & Resins Pvt. Ltd. | Dromel™ 103 is a Butylated Melamine Formaldehyde Resin. | |
| Dromel™ 104 | D.R. Coats Ink & Resins Pvt. Ltd. | Dromel™104 is a Butylated Urea Formaldehyde Resin. | |
| Dromide® 930 | D.R. Coats Ink & Resins Pvt. Ltd. | Dromide® 930 is a Co-solvent Soluble Non-Reactive Polyamide Resin suitable for flexographic and gravure printing inks and over printing lacquers, this resin provides good glossy sharp prints. | |
| Dromide® 9315 | D.R. Coats Ink & Resins Pvt. Ltd. | Dromide® 9315 is a High Viscosity Reactive Polyamide Curing agent for Epoxy Resin to be used in various applications. | |
| Dromide® 9315X | D.R. Coats Ink & Resins Pvt. Ltd. | Dromide® 9315X is a Low Viscosity Reactive Polyamide Curing agent for epoxy resin supplied in 70% solution in Xylene. | |
| Dromide® 9325 | D.R. Coats Ink & Resins Pvt. Ltd. | Dromide® 9325 is a Medium Viscosity Reactive Polyamide Curing Agent for epoxy resin to be used in various applications. | |
| Dromide® 9340 | D.R. Coats Ink & Resins Pvt. Ltd. | Dromide® 9340 is a Medium to Low Viscosity Reactive Polyamide Curing Agent for epoxy resin to be used in various applications. | |
| Dromide® 950 | D.R. Coats Ink & Resins Pvt. Ltd. | Dromide® 950 is a Alcohol Soluble Non-Reactive Polyamide Resin with low temperature resistance used for flexographic and gravure liquid printing inks. | |
| Dropack™ 5244 | D.R. Coats Ink & Resins Pvt. Ltd. | Dropack™ 5244 is Thermoplastic Non-Reactive High Molecular Weight Aliphatic Polyurethane. | |
| Droplas™ 4010 | D.R. Coats Ink & Resins Pvt. Ltd. | Droplas™ 4010 is a Oil free saturated polyester resins 65% in solvent C-nine/butyl glycol (70 SNABG). | |
| Dropol™ 2201 | D.R. Coats Ink & Resins Pvt. Ltd. | Dropol™ 2201 is a Rosin Modified Phenolic Resin. | |
| Dropol™ 2203 | D.R. Coats Ink & Resins Pvt. Ltd. | Dropol™ 2203 is a Rosin Modified Phenolic Resin. | |
| Dropol™ 2205 | D.R. Coats Ink & Resins Pvt. Ltd. | Dropol™ 2205 is a Rosin Modified Phenolic Resin. | |
| Dropol™ 2252 | D.R. Coats Ink & Resins Pvt. Ltd. | Dropol™ 2252 is a Pure Phenolic Novolac Resin. | |
| Dropol™ 2271 | D.R. Coats Ink & Resins Pvt. Ltd. | Dropol™ 2271 is an Alkyl Phenolic Resin. | |
| Dropol™ 2274 | D.R. Coats Ink & Resins Pvt. Ltd. | Dropol™ 2274 is an Alkyl Phenolic Resin. | |
| Dropoxy™ 7250 | D.R. Coats Ink & Resins Pvt. Ltd. | Dropoxy™ 7250 is a Medium Viscosity Unmodified Bisphenol A based Liquid Epoxy Resin. | |
| Dropoxy™ 7257 | D.R. Coats Ink & Resins Pvt. Ltd. | Dropoxy™ 7257 is a low viscous epoxy resin based on Bisphenol A modified with aromatic glycidyl ether. | |
| Dropoxy™ 7450X | D.R. Coats Ink & Resins Pvt. Ltd. | Dropoxy™ 7450X is a Liquid Epoxy Resin supplied in 75% solution in Xylene. | |
| DYHARD® 100 | AlzChem AG | DYHARD® 100 is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations...展开 DYHARD® 100 is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations and to improve handling. The products of the DYHARD® 100 series do not react with epoxy resins at moderate temperatures. Dispersed in epoxy resin the mixture remains stable until activated by heat. 收起 | |
| DYHARD® 100S | AlzChem AG | DYHARD® 100S is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomeration...展开 DYHARD® 100S is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations and to improve handling. The products of the DYHARD® 100 series do not react with epoxy resins at moderate temperatures. Dispersed in epoxy resin the mixture remains stable until activated by heat. 收起 | |
| DYHARD® 100SF | AlzChem AG | DYHARD® 100SF is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomeratio...展开 DYHARD® 100SF is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations and to improve handling. The products of the DYHARD® 100 series do not react with epoxy resins at moderate temperatures. Dispersed in epoxy resin the mixture remains stable until activated by heat. 收起 | |
| DYHARD® 100SH | AlzChem AG | DYHARD® 100SH is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomeratio...展开 DYHARD® 100SH is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations and to improve handling. The products of the DYHARD® 100 series do not react with epoxy resins at moderate temperatures. Dispersed in epoxy resin the mixture remains stable until activated by heat. 收起 | |
| DYHARD® A5M30 | AlzChem AG | DYHARD® A5M30 is widely used as a highly active but also latent accelerator master batch of DYHARD® UR500 in thermosetting epoxy resin formulations. It is especially designed for dust free work environments and easy to mix in productions | |
| DYHARD® CAAB | AlzChem AG | DYHARD® CAAB is a curing agent for matt finish powder coatings based on epoxy or epoxy-polyester hybrid formulations. Usually it is used together with DYHARD® PIN to realize these matt finishes. For low gloss applications the optimal mixing ratio between ...展开 DYHARD® CAAB is a curing agent for matt finish powder coatings based on epoxy or epoxy-polyester hybrid formulations. Usually it is used together with DYHARD® PIN to realize these matt finishes. For low gloss applications the optimal mixing ratio between DYHARD® PIN and DYHARD® CAAB is 45:55. This ideal mixture is also available in the ready to use premix DYHARD® PMC for an easy handling. 收起 | |
| DYHARD® D50EP | AlzChem AG | DYHARD® D50EP is a master batch of 50% DYHARD® 100S in standard bisphenol A epoxy resin (EEW 182-192). Advantages include a dust-free production environment, as well as easier dosage and incorporation. It is cost-effective due to easy handling, and offers...展开 DYHARD® D50EP is a master batch of 50% DYHARD® 100S in standard bisphenol A epoxy resin (EEW 182-192). Advantages include a dust-free production environment, as well as easier dosage and incorporation. It is cost-effective due to easy handling, and offers the same reactivity, latency, and mechanical properties as the DYHARD® 100 series. This product is recommended for one-component thermosetting epoxy resin formulations for the automotive, sporting goods, and aerospace industry, for adhesives, for encapsulation compounds, and more. 收起 | |
| DYHARD® DF50EP | AlzChem AG | DYHARD® DF50EP is a master batch of 50% DYHARD® 100SF in standard bisphenol A epoxy resin (EEW 182-192). Products of the DYHARD® master batches are widely used for all kinds of one component thermosetting epoxy resin formulations | |
| DYHARD® Fluid 111 | AlzChem AG | DYHARD® Fluid 111 is a liquid latent curing agent for thermosetting epoxy resin formulations. | |
| DYHARD® Fluid 151 | AlzChem AG | DYHARD® Fluid 151 is part of a fully formulated latent epoxy resin system, which has been specifically designed for resin transfer molding applications. | |
| DYHARD® Fluid 212 | AlzChem AG | DYHARD® Fluid 212 is a liquid latent curing agent. It features a long pot life in the impregnation bath, a rapid cure at 120ºC, optical clearness, and high transparency. This makes it ideal for use in filament winding applications. | |
| DYHARD® Fluid AC11 | AlzChem AG | DYHARD® Fluid AC11 is part of a fully formulated latent epoxy resin system, which has been specifically designed for resin transfer molding applications. | |
| DYHARD® MCA10 | AlzChem AG | DYHARD® MCA10 is a special formulated curing agent for low temperature cure, or very fast cure at standard cure temperatures. A formulated 1K-Epoxy resins system with DYHARD® MCA10 still has an acceptable long latency of a few weeks at room temperature. | |
| DYHARD® MCA30 | AlzChem AG | DYHARD® MCA30 is a non toxic, special formulated curing agent for low temperature cure, high gloss epoxy powder coatings. | |
| DYHARD® MI-C | AlzChem AG | DYHARD® MI-C is used as a very active but also reasonably latent accelerator in thermosetting epoxy resin formulations. It is typically used for fast curing, or low temperature cure, resin systems with low latency requirements. | |
| DYHARD® MI-FF | AlzChem AG | DYHARD® MI-FF is used as a very active but also reasonably latent accelerator in thermosetting epoxy resin formulations. It is typically used for fast curing, or low temperature cure, resin systems with low latency requirements. | |
| DYHARD® MIA5 | AlzChem AG | DYHARD® MIA5 is used as a very active but also reasonably latent accelerator in thermosetting epoxy resin formulations. It’s use is particularly suited in combination with micronized dicyandiamide from the DYHARD® CU-Line, or with the dicyandiamide master...展开 DYHARD® MIA5 is used as a very active but also reasonably latent accelerator in thermosetting epoxy resin formulations. It’s use is particularly suited in combination with micronized dicyandiamide from the DYHARD® CU-Line, or with the dicyandiamide master batches from the DYHARD® MB-Line. 收起 | |
| DYHARD® OTB | AlzChem AG | DYHARD® OTB represents a medium reactive curing agent for high gloss epoxy powder coatings. With it’s ideal distribution properties in epoxy resins high quality finishes at low curing temperatures are provided. | |
| DYHARD® PI | AlzChem AG | DYHARD® PI represents an imidazole based accelerator and/or hardener for thermosetting epoxy resin systems. It has a larger particle size than DYHARD® PI-FF, which is more suitable where lower reactiviy's are needed. | |
| DYHARD® PI-FF | AlzChem AG | DYHARD® PI-FF represents an imidazole based accelerator and/or hardener for thermosetting epoxy resin systems. DYHARD® PI-FF has a smaller particle size than DYHARD® PI and hence is more suitable where higher reactivity's are needed. | |
| DYHARD® PIN | AlzChem AG | DYHARD® PIN represents a curing agent which is used in low gloss epoxy and epoxy-polyester hybrid powder coatings. It’s ideal distribution properties in both resin systems provides high quality finishes with a very good color stability. | |
| DYHARD® PMC | AlzChem AG | DYHARD® PMC represents a matt curing agent for low gloss epoxy and epoxy-polyester hybrid powder coatings. With its ideal distribution properties in both resins systems, high quality finishes with a very good color stability are provided. | |
| DYHARD® RF1000 | AlzChem AG | DYHARD® RF1000 is part of a fully formulated latent epoxy resin system, which has been specifically designed for resin transfer molding applications. | |
| DYHARD® RF2100 | AlzChem AG | DYHARD® RF2100 is a low viscos modified bisphenol A epoxy resin. It features a long pot life in the impregnation bath, a rapid cure at 120ºC, optical clearness, and high transparency. This makes it ideal for use in filament winding applications. | |
| DYHARD® UR200 | AlzChem AG | DYHARD® UR200 represents a latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. | |
| DYHARD® UR300 | AlzChem AG | DYHARD® UR300 represents a latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. | |
| DYHARD® UR300AB | AlzChem AG | DYHARD® UR300AB represents a latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. | |
| DYHARD® UR400 | AlzChem AG | DYHARD® UR400 represents a bi-functional, micronized accelerator based on a substituted urea. Being an active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in...展开 DYHARD® UR400 represents a bi-functional, micronized accelerator based on a substituted urea. Being an active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. 收起 | |
| DYHARD® UR500 | AlzChem AG | DYHARD® UR500 represents a bi-functional, micronized accelerator based on a substituted urea. Being a highly active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 ser...展开 DYHARD® UR500 represents a bi-functional, micronized accelerator based on a substituted urea. Being a highly active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. 收起 | |
| DYHARD® UR700 | AlzChem AG | DYHARD® UR700 represents a highly latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. In addit...展开 DYHARD® UR700 represents a highly latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. In addition, DYHARD® UR700 is soluble in water, which makes it a preferred accelerator for waterborne applications. 收起 | |
| DYHARD® UR800 | AlzChem AG | DYHARD® UR800 represents a very latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. | |
| DYHARD® URAcc13 | AlzChem AG | DYHARD® URAcc13 represents a formulated latent, micronized accelerator based on a substituted urea. Being an active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 ser...展开 DYHARD® URAcc13 represents a formulated latent, micronized accelerator based on a substituted urea. Being an active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. 收起 | |
| DYHARD® URAcc57 | AlzChem AG | DYHARD® URAcc57 represents a latent, micronized accelerator based on a substituted urea. Being a very highly active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 ser...展开 DYHARD® URAcc57 represents a latent, micronized accelerator based on a substituted urea. Being a very highly active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. 收起 | |
| ExBar™ 200 | Excalibar Minerals LLC | ExBar™ 200 is a raw mineral material that is manufactured from natural barium sulfate ore. This product is used in many different applications such as paints, adhesives and sealants. It has a median particle size of 15.0u and an oil absorption of 9. | |
| ExBar™ 325 | Excalibar Minerals LLC | ExBar™ 325 is a raw mineral material that is manufactured from natural barium sulfate ore. This product is used in many different applications such as paints, adhesives and sealants. It has a median particle size of 10.0u and an oil absorption of 10. | |
| ExBar™ 400 | Excalibar Minerals LLC | ExBar™ 400 is a raw mineral material that is manufactured from natural barium sulfate ore. This product is used in many different applications such as paints, adhesives and sealants. It has a median particle size of 8.0u and an oil absorption of 12. | |
| ExBar™ W 1 | Excalibar Minerals LLC | ExBar™ W 1 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 1 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 1u and an oil absorption of 15. 收起 | |
| ExBar™ W 2 | Excalibar Minerals LLC | ExBar™ W 2 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 2 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 2u and an oil absorption of 13. 收起 | |
| ExBar™ W 3 | Excalibar Minerals LLC | ExBar™ W 3 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 3 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 3u and an oil absorption of 13. 收起 | |
| ExBar™ W 325 | Excalibar Minerals LLC | ExBar™ W 325 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are pr...展开 ExBar™ W 325 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. 收起 | |
| ExBar™ W 4 | Excalibar Minerals LLC | ExBar™ W 4 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 4 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 4u and an oil absorption of 12. 收起 | |
| ExBar™ W 400 | Excalibar Minerals LLC | ExBar™ W 400 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are pr...展开 ExBar™ W 400 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 8u and an oil absorption of 10. 收起 | |
| ExCal® 100 | Excalibar Minerals LLC | ExCal® 100 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications. |
