| #249 HI-TECH | PCI Group, Inc. | #249 HI-TECH is a clear blend of Alkyl-Aryl modified silicones. It is designed for high solids coating systems to improve mar resistance without the standard recoat problems. Designed for use in virtually all high solids solvent-borne systems. | |
| 901-GDA-2 | PCI Group, Inc. | 901-GDA-2 is a clear, silicone-free polyvinyl isobutyl ether solution used to improve color development, leveling and gloss while controlling surface flooding and floating. It can be used with acrylic resin, alkyd (long, medium and short oils), polyamide,...展开 901-GDA-2 is a clear, silicone-free polyvinyl isobutyl ether solution used to improve color development, leveling and gloss while controlling surface flooding and floating. It can be used with acrylic resin, alkyd (long, medium and short oils), polyamide, polyester and urethane for pigmented and non-pigmented systems. 收起 | |
| 941 LBA | PCI Group, Inc. | 941 LBA is a clear, linear polydimethylsiloxane polymer designed for use in systems containing non-leafing aluminums. It provides higher brightness, controlled uniformity and burnishing and helps prevent “black” float. | |
| AMA | PCI Group, Inc. | AMA is a clear-colored dimethyl silicone which improves mar resistance and reduces surface tension in conventional solvent based coatings. Systems include: acrylic resins, alkyd, epoxy, lacquer, phenolic, polyester and urethane. It is recommended for clea...展开 AMA is a clear-colored dimethyl silicone which improves mar resistance and reduces surface tension in conventional solvent based coatings. Systems include: acrylic resins, alkyd, epoxy, lacquer, phenolic, polyester and urethane. It is recommended for clear topcoats. 收起 | |
| AMAFCA | PCI Group, Inc. | AMAFCA is a clear-colored Alkyl-Aryl silicone designed control foaming during application. It also promotes improved mar resistance for virtually all solvent based coating systems. It can control foaming in roller coater, flow coater, curtain coater, dip,...展开 AMAFCA is a clear-colored Alkyl-Aryl silicone designed control foaming during application. It also promotes improved mar resistance for virtually all solvent based coating systems. It can control foaming in roller coater, flow coater, curtain coater, dip, conventional and airless spray systems. 收起 | |
| AMMA | PCI Group, Inc. | AMMA is a non-ionic, clear-colored polyalkyeneoxide-modified polydimethylsiloxane developed for high solids / high solids metallic coatings. It helps prevent mottling, enhances color uniformity and increases the sharpness of gloss. Systems include: acryl...展开 AMMA is a non-ionic, clear-colored polyalkyeneoxide-modified polydimethylsiloxane developed for high solids / high solids metallic coatings. It helps prevent mottling, enhances color uniformity and increases the sharpness of gloss. Systems include: acrylic resins, alkyds, epoxy, melamine, phenolic, polyamide, polyester, urea and urethane. 收起 | |
| Anti-Spalling Compound | ADM | Anti-Spalling Compound, in the form of a semi viscous to viscous liquid, is a blend of scientific boiled linseed oil and mineral spirits. It has many applications, such as varnishes, paints, alkyd resins, hardboard, inks, coatings, and more. | |
| ASAFA | PCI Group, Inc. | ASAFA is a pale amber colored blend of a dimethyl silicone and refined naphthenic base oil. Designed for use in conventional systems such as acrylic resins, alkyds, polyamide, polyester and urethane. It acts to control silking, flooding and pigment float ...展开 ASAFA is a pale amber colored blend of a dimethyl silicone and refined naphthenic base oil. Designed for use in conventional systems such as acrylic resins, alkyds, polyamide, polyester and urethane. It acts to control silking, flooding and pigment float while sharpening gloss, improving pigment wetting and enhancing leveling. 收起 | |
| ASAFA #3 | PCI Group, Inc. | ASAFA #3 is a clear-colored linear polydimethylsiloxane polymer used where floating or silking is a problem. It effectively balances out solvents during the air dry process. It can be used in coating systems such as alkyds, modified alkyds, acrylics, epox...展开 ASAFA #3 is a clear-colored linear polydimethylsiloxane polymer used where floating or silking is a problem. It effectively balances out solvents during the air dry process. It can be used in coating systems such as alkyds, modified alkyds, acrylics, epoxies, vinyls and most oleo-resinous non-aqueous systems. 收起 | |
| ASAFAMA | PCI Group, Inc. | ASAFAMA is a clear-colored, highly-modified silicone fluid designed for use in systems where a dimethyl silicone may be a problem. It is useful for enhancing the defoaming properties of applied coatings, and sharpens gloss, improves color acceptance and i...展开 ASAFAMA is a clear-colored, highly-modified silicone fluid designed for use in systems where a dimethyl silicone may be a problem. It is useful for enhancing the defoaming properties of applied coatings, and sharpens gloss, improves color acceptance and improves mar resistance without recoating problems. 收起 | |
| ASASWA | PCI Group, Inc. | ASASWA is a light amber, highly modified reactive polyamide resin solution. It can be used in acid-catalyzed, alkyds (short, medium and long oils), epoxy, epoxy ester, polyurethane and high solids polyester systems. It increases resistance to sag, allows ...展开 ASASWA is a light amber, highly modified reactive polyamide resin solution. It can be used in acid-catalyzed, alkyds (short, medium and long oils), epoxy, epoxy ester, polyurethane and high solids polyester systems. It increases resistance to sag, allows for enhanced pigment wetting and color development and eliminates hard settling. 收起 | |
| ASLA | PCI Group, Inc. | ASLA is a clear, silicone-free, polyvinyl ethyl ether solution used to improve color development, leveling and gloss while controllling surface flooding and floating. It can be used in acrylic resins, alkyds (long, med., short oils), polyamide, polyester ...展开 ASLA is a clear, silicone-free, polyvinyl ethyl ether solution used to improve color development, leveling and gloss while controllling surface flooding and floating. It can be used in acrylic resins, alkyds (long, med., short oils), polyamide, polyester and urethane pigmented and non-pigmented systems. 收起 | |
| Bleached Linseed Oil | ADM | Bleached Linseed Oil, in the form of amber clear liquid, is an all-purpose refined, free from mineral acids, grinding oil. It has many applications, such as varnishes, paints, alkyd resins, hardboard, inks, coatings, and more. | |
| C-485-FBRA | PCI Group, Inc. | C-485-FBRA is a clear alkyl-aryl air release agent which acts as a foam and bubble release agent. It is compatible with conventional systems: acrylic resins, alkyds, lacquers, melamine, phenolic, polyamide, polyester and urethane. It also acts to improve ...展开 C-485-FBRA is a clear alkyl-aryl air release agent which acts as a foam and bubble release agent. It is compatible with conventional systems: acrylic resins, alkyds, lacquers, melamine, phenolic, polyamide, polyester and urethane. It also acts to improve leveling and slip. 收起 | |
| CHEM-REZ A-1050 | PCI Group, Inc. | CHEM-REZ A-1050 is a clear poly vinyl ethyl isoburyl ether solution recommended for use in most conventional and high solid coating systems. It increases adhesion and flexibility, improves flow and leveling, acts as a plasticizer for coatings and inks and...展开 CHEM-REZ A-1050 is a clear poly vinyl ethyl isoburyl ether solution recommended for use in most conventional and high solid coating systems. It increases adhesion and flexibility, improves flow and leveling, acts as a plasticizer for coatings and inks and is useful in dip and flow coater systems. 收起 | |
| CLAWB | PCI Group, Inc. | CLAWB is a clear, colorless liquid comprised of and epoxy functional silane which serves as a crosslinker and adhesion promoter. It is intended for formulations containing acrylic latexes and polyurethane dispersions with carboxy or amino functionality. W...展开 CLAWB is a clear, colorless liquid comprised of and epoxy functional silane which serves as a crosslinker and adhesion promoter. It is intended for formulations containing acrylic latexes and polyurethane dispersions with carboxy or amino functionality. Waterborne coating formulations using CLAWB show improved solvent, impact and mar resistance, superior wet and dry adhesion, gloss retention upon aging and improved stain resistance in wood coatings. 收起 | |
| DYHARD® 100 | AlzChem AG | DYHARD® 100 is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations...展开 DYHARD® 100 is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations and to improve handling. The products of the DYHARD® 100 series do not react with epoxy resins at moderate temperatures. Dispersed in epoxy resin the mixture remains stable until activated by heat. 收起 | |
| DYHARD® 100S | AlzChem AG | DYHARD® 100S is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomeration...展开 DYHARD® 100S is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations and to improve handling. The products of the DYHARD® 100 series do not react with epoxy resins at moderate temperatures. Dispersed in epoxy resin the mixture remains stable until activated by heat. 收起 | |
| DYHARD® 100SF | AlzChem AG | DYHARD® 100SF is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomeratio...展开 DYHARD® 100SF is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations and to improve handling. The products of the DYHARD® 100 series do not react with epoxy resins at moderate temperatures. Dispersed in epoxy resin the mixture remains stable until activated by heat. 收起 | |
| DYHARD® 100SH | AlzChem AG | DYHARD® 100SH is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomeratio...展开 DYHARD® 100SH is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations and to improve handling. The products of the DYHARD® 100 series do not react with epoxy resins at moderate temperatures. Dispersed in epoxy resin the mixture remains stable until activated by heat. 收起 | |
| DYHARD® CAAB | AlzChem AG | DYHARD® CAAB is a curing agent for matt finish powder coatings based on epoxy or epoxy-polyester hybrid formulations. Usually it is used together with DYHARD® PIN to realize these matt finishes. For low gloss applications the optimal mixing ratio between ...展开 DYHARD® CAAB is a curing agent for matt finish powder coatings based on epoxy or epoxy-polyester hybrid formulations. Usually it is used together with DYHARD® PIN to realize these matt finishes. For low gloss applications the optimal mixing ratio between DYHARD® PIN and DYHARD® CAAB is 45:55. This ideal mixture is also available in the ready to use premix DYHARD® PMC for an easy handling. 收起 | |
| DYHARD® D50EP | AlzChem AG | DYHARD® D50EP is a master batch of 50% DYHARD® 100S in standard bisphenol A epoxy resin (EEW 182-192). Advantages include a dust-free production environment, as well as easier dosage and incorporation. It is cost-effective due to easy handling, and offers...展开 DYHARD® D50EP is a master batch of 50% DYHARD® 100S in standard bisphenol A epoxy resin (EEW 182-192). Advantages include a dust-free production environment, as well as easier dosage and incorporation. It is cost-effective due to easy handling, and offers the same reactivity, latency, and mechanical properties as the DYHARD® 100 series. This product is recommended for one-component thermosetting epoxy resin formulations for the automotive, sporting goods, and aerospace industry, for adhesives, for encapsulation compounds, and more. 收起 | |
| DYHARD® DF50EP | AlzChem AG | DYHARD® DF50EP is a master batch of 50% DYHARD® 100SF in standard bisphenol A epoxy resin (EEW 182-192). Products of the DYHARD® master batches are widely used for all kinds of one component thermosetting epoxy resin formulations | |
| DYHARD® Fluid 111 | AlzChem AG | DYHARD® Fluid 111 is a liquid latent curing agent for thermosetting epoxy resin formulations. | |
| DYHARD® Fluid 212 | AlzChem AG | DYHARD® Fluid 212 is a liquid latent curing agent. It features a long pot life in the impregnation bath, a rapid cure at 120ºC, optical clearness, and high transparency. This makes it ideal for use in filament winding applications. | |
| DYHARD® MCA10 | AlzChem AG | DYHARD® MCA10 is a special formulated curing agent for low temperature cure, or very fast cure at standard cure temperatures. A formulated 1K-Epoxy resins system with DYHARD® MCA10 still has an acceptable long latency of a few weeks at room temperature. | |
| DYHARD® MCA30 | AlzChem AG | DYHARD® MCA30 is a non toxic, special formulated curing agent for low temperature cure, high gloss epoxy powder coatings. | |
| DYHARD® MI-C | AlzChem AG | DYHARD® MI-C is used as a very active but also reasonably latent accelerator in thermosetting epoxy resin formulations. It is typically used for fast curing, or low temperature cure, resin systems with low latency requirements. | |
| DYHARD® MI-FF | AlzChem AG | DYHARD® MI-FF is used as a very active but also reasonably latent accelerator in thermosetting epoxy resin formulations. It is typically used for fast curing, or low temperature cure, resin systems with low latency requirements. | |
| DYHARD® MIA5 | AlzChem AG | DYHARD® MIA5 is used as a very active but also reasonably latent accelerator in thermosetting epoxy resin formulations. It’s use is particularly suited in combination with micronized dicyandiamide from the DYHARD® CU-Line, or with the dicyandiamide master...展开 DYHARD® MIA5 is used as a very active but also reasonably latent accelerator in thermosetting epoxy resin formulations. It’s use is particularly suited in combination with micronized dicyandiamide from the DYHARD® CU-Line, or with the dicyandiamide master batches from the DYHARD® MB-Line. 收起 | |
| DYHARD® OTB | AlzChem AG | DYHARD® OTB represents a medium reactive curing agent for high gloss epoxy powder coatings. With it’s ideal distribution properties in epoxy resins high quality finishes at low curing temperatures are provided. | |
| DYHARD® PI | AlzChem AG | DYHARD® PI represents an imidazole based accelerator and/or hardener for thermosetting epoxy resin systems. It has a larger particle size than DYHARD® PI-FF, which is more suitable where lower reactiviy's are needed. | |
| DYHARD® PI-FF | AlzChem AG | DYHARD® PI-FF represents an imidazole based accelerator and/or hardener for thermosetting epoxy resin systems. DYHARD® PI-FF has a smaller particle size than DYHARD® PI and hence is more suitable where higher reactivity's are needed. | |
| DYHARD® PIN | AlzChem AG | DYHARD® PIN represents a curing agent which is used in low gloss epoxy and epoxy-polyester hybrid powder coatings. It’s ideal distribution properties in both resin systems provides high quality finishes with a very good color stability. | |
| DYHARD® PMC | AlzChem AG | DYHARD® PMC represents a matt curing agent for low gloss epoxy and epoxy-polyester hybrid powder coatings. With its ideal distribution properties in both resins systems, high quality finishes with a very good color stability are provided. | |
| DYHARD® UR200 | AlzChem AG | DYHARD® UR200 represents a latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. | |
| DYHARD® UR300 | AlzChem AG | DYHARD® UR300 represents a latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. | |
| DYHARD® UR300AB | AlzChem AG | DYHARD® UR300AB represents a latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. | |
| DYHARD® UR400 | AlzChem AG | DYHARD® UR400 represents a bi-functional, micronized accelerator based on a substituted urea. Being an active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in...展开 DYHARD® UR400 represents a bi-functional, micronized accelerator based on a substituted urea. Being an active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. 收起 | |
| DYHARD® UR500 | AlzChem AG | DYHARD® UR500 represents a bi-functional, micronized accelerator based on a substituted urea. Being a highly active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 ser...展开 DYHARD® UR500 represents a bi-functional, micronized accelerator based on a substituted urea. Being a highly active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. 收起 | |
| DYHARD® UR700 | AlzChem AG | DYHARD® UR700 represents a highly latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. In addit...展开 DYHARD® UR700 represents a highly latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. In addition, DYHARD® UR700 is soluble in water, which makes it a preferred accelerator for waterborne applications. 收起 | |
| DYHARD® UR800 | AlzChem AG | DYHARD® UR800 represents a very latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. | |
| DYHARD® URAcc13 | AlzChem AG | DYHARD® URAcc13 represents a formulated latent, micronized accelerator based on a substituted urea. Being an active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 ser...展开 DYHARD® URAcc13 represents a formulated latent, micronized accelerator based on a substituted urea. Being an active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. 收起 | |
| DYHARD® URAcc57 | AlzChem AG | DYHARD® URAcc57 represents a latent, micronized accelerator based on a substituted urea. Being a very highly active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 ser...展开 DYHARD® URAcc57 represents a latent, micronized accelerator based on a substituted urea. Being a very highly active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. 收起 | |
| FCABA 2 | PCI Group, Inc. | FCABA 2 is a slightly cloudy blend of silicone and organic acid esters. It can be used in most non-aqueous based coating systems, adhesives and inks. It will prevent bubble and foaming in flow coat, curtain coater, dip, roller coater, conventional and air...展开 FCABA 2 is a slightly cloudy blend of silicone and organic acid esters. It can be used in most non-aqueous based coating systems, adhesives and inks. It will prevent bubble and foaming in flow coat, curtain coater, dip, roller coater, conventional and airless spray applications. It is stable over a wide temperature range. 收起 | |
| FSDS | PCI Group, Inc. | FSDS is a clear liquid comprised of a blend of fluorosurfactant diols. It is intended to provide improved flow, leveling and reduced surface waviness and orange peel without associated air entrainment problems. It reduces the need for multiple additives b...展开 FSDS is a clear liquid comprised of a blend of fluorosurfactant diols. It is intended to provide improved flow, leveling and reduced surface waviness and orange peel without associated air entrainment problems. It reduces the need for multiple additives by acting as a de-aerator and flow / leveling agent. It is well suited for clear formulations and readily miscible with alkyds, polyesters, cellulosics, acrylics and high solids coating systems. 收起 | |
| HSADA-42 | PCI Group, Inc. | HSADA-42 is a clear fluoroaliphatic polymeric ester used in solvent, high solids and UV curable coating systems. It is non-ionic and works to reduce or eliminate problems associated with surface tension such as craters, fisheyes, picture framing and orang...展开 HSADA-42 is a clear fluoroaliphatic polymeric ester used in solvent, high solids and UV curable coating systems. It is non-ionic and works to reduce or eliminate problems associated with surface tension such as craters, fisheyes, picture framing and orange peel. HSADA-42 is active throughout the curing process and demonstrates significantly less foam development than many other fluorosurfactants. 收起 | |
| HSADA-44 | PCI Group, Inc. | HSADA-44 is a clear, fluoroaliphatic polymeric ester used in solvent, high solids and aqueous coating systems. It is non-ionic and works to reduce or eliminate problems associated with surface tension such as craters, fish-eyes, picture framing and orange...展开 HSADA-44 is a clear, fluoroaliphatic polymeric ester used in solvent, high solids and aqueous coating systems. It is non-ionic and works to reduce or eliminate problems associated with surface tension such as craters, fish-eyes, picture framing and orange peel. HSADA-44 is active throughout the curing process and demonstrates significantly less foam development than other fluorosurfactants. 收起 | |
| HSWADA | PCI Group, Inc. | HSWADA is an amber-colored blend of a pale tall oil fatty acid with moderate rosin acid content and an anionic wetting and dispersing agent. It improves substrate wetting, enhances viscosity stability and prevents hard settling while increasing the pigmen...展开 HSWADA is an amber-colored blend of a pale tall oil fatty acid with moderate rosin acid content and an anionic wetting and dispersing agent. It improves substrate wetting, enhances viscosity stability and prevents hard settling while increasing the pigment grinding speed. It is designed for systems such as alkyds, drying oils, amino resins, vinyls, acrylics, oil modified urethanes, polyesters, and epoxy esters. 收起 | |
| HSWADA-60 | PCI Group, Inc. | HSWADA-60 is an amber colored blend of a functional capped amine with tall oil fatty acid. The resulting product is a wetting agent with high efficiency toward alkaline based pigments. It can be used with alkyd, drying oil, amino resin, vinyl, acrylic, oi...展开 HSWADA-60 is an amber colored blend of a functional capped amine with tall oil fatty acid. The resulting product is a wetting agent with high efficiency toward alkaline based pigments. It can be used with alkyd, drying oil, amino resin, vinyl, acrylic, oil modified urethane, polyester, epoxy, and epoxy ester coating systems. 收起 | |
| HSWADA-B | PCI Group, Inc. | HSWADA-B is an amber colored blend of amine chemistry with dimerized acids. The resulting product is a wetting agent with high efficiency toward acidic based pigments. It has an affinity for alkaline pigments. It can be used with alkyd, drying oil, amino ...展开 HSWADA-B is an amber colored blend of amine chemistry with dimerized acids. The resulting product is a wetting agent with high efficiency toward acidic based pigments. It has an affinity for alkaline pigments. It can be used with alkyd, drying oil, amino resin, vinyl, acrylic, oil modified urethane, polyester, epoxy, epoxy ester and polyester coating systems. 收起 | |
| MFA 31 | PCI Group, Inc. | MFA 31 is a non-ionic, clear, recoatable polyalkyeneoxide modified polydimethylsiloxane developed for water-borne and water-reducible systems. It can be used to eliminate film defects, such as craters, through refined flow and leveling. It also enhances c...展开 MFA 31 is a non-ionic, clear, recoatable polyalkyeneoxide modified polydimethylsiloxane developed for water-borne and water-reducible systems. It can be used to eliminate film defects, such as craters, through refined flow and leveling. It also enhances color uniformity and allows for sharper gloss. 收起 | |
| NOFO 1032 | PCI Group, Inc. | NOFO 1032 is a blend of clear silicone and organic acid esters. It is used in most non-aqueous based coating systems, adhesives and inks. It fosters the release of air from high build epoxy, urethane, and casting resins. It is stable over a wide temperatu...展开 NOFO 1032 is a blend of clear silicone and organic acid esters. It is used in most non-aqueous based coating systems, adhesives and inks. It fosters the release of air from high build epoxy, urethane, and casting resins. It is stable over a wide temperature range and will not cause surface defects associated with most silicone defoamers. 收起 | |
| NVOCF-WB | PCI Group, Inc. | NVOCF-WB is a clear liquid, non-ionic, water soluble fluorosurfactant designed to improve flow, leveling and surface appearance of water based coating systems. It contains no volatile organic components, has excellent water solubility and is recommended f...展开 NVOCF-WB is a clear liquid, non-ionic, water soluble fluorosurfactant designed to improve flow, leveling and surface appearance of water based coating systems. It contains no volatile organic components, has excellent water solubility and is recommended for use in clear coatings. NVOCF-WB can be added at any point during the manufacturing and/or use processes. 收起 | |
| OptiXan™ 40 | ADM | OptiXan™ 40 is an emulsifier and thickener in the form of a cream to tan colored, free-flowing powder or granules with a characteristic odor, and a mesh size of 40. This product is intended for use in non-food applications as thickener and rheology contro...展开 OptiXan™ 40 is an emulsifier and thickener in the form of a cream to tan colored, free-flowing powder or granules with a characteristic odor, and a mesh size of 40. This product is intended for use in non-food applications as thickener and rheology control agent, such as in paints, printing inks, and coatings. 收起 | |
| OptiXan™ Dispersible | ADM | OptiXan™ Dispersible is an emulsifier and thickener in the form of a cream to tan colored, free-flowing powder or granules with a characteristic odor. This product is intended for use in non-food applications as thickener and rheology control agent, such ...展开 OptiXan™ Dispersible is an emulsifier and thickener in the form of a cream to tan colored, free-flowing powder or granules with a characteristic odor. This product is intended for use in non-food applications as thickener and rheology control agent, such as in paints, printing inks, and coatings. 收起 | |
| OWSS | PCI Group, Inc. | OWSS is a non-ionic, clear liquid which acts as a multifunctional solubilizer and surfactant. It can be used in a wide range of products and applications including paint & coatings, water based degreasers and printing inks. | |
| Pale Grinders | ADM | Pale Grinders, in the form of amber clear liquid, is linseed oil with linseed fatty acids, high acidity, good wetting properties, and light in color. It has many applications, such as varnishes, paints, alkyd resins, hardboard, inks, coatings, and more. | |
| RAMA | PCI Group, Inc. | RAMA is a recoatable, clear-colored blend of Alkyl-Aryl modified silicones. It is used to improve mar resistance without the standard recoat problems of common silicones. It can be used in virtually all solvent-borne systems to reduce flooding and floatin...展开 RAMA is a recoatable, clear-colored blend of Alkyl-Aryl modified silicones. It is used to improve mar resistance without the standard recoat problems of common silicones. It can be used in virtually all solvent-borne systems to reduce flooding and floating, improve flow, sharpen gloss and improve slip. 收起 | |
| SA #1 | PCI Group, Inc. | SA #1 is a clear-colored silicone blend useful in high solids coatings. Its primary function is to improve flow and leveling during application, including elimination of bubbles during application, reducing orange peel and improving the final product's ma...展开 SA #1 is a clear-colored silicone blend useful in high solids coatings. Its primary function is to improve flow and leveling during application, including elimination of bubbles during application, reducing orange peel and improving the final product's mar resistance. It can be used in virtually all high solids resins. 收起 | |
| SAFA 302 | PCI Group, Inc. | SAFA 302 is a clear-colored blend comprised of polyether modified dimethlylpolysiloxane and silicone glycol co-polymer. Together, these provide defoaming, mar resistance, increased resin compatibility, surface tension reduction and lowering of the coeffic...展开 SAFA 302 is a clear-colored blend comprised of polyether modified dimethlylpolysiloxane and silicone glycol co-polymer. Together, these provide defoaming, mar resistance, increased resin compatibility, surface tension reduction and lowering of the coefficient of friction. It is compatible with most types of solvent and water systems, including emulsions. 收起 | |
| Silzot® HQ plus (Powder) | AlzChem AG | Silzot® HQ plus (Powder) is a grey powder derived from the direct chemical reaction of silicon and nitrogen. | |
| Silzot® HQ (Powder) | AlzChem AG | Silzot® HQ (Powder) is a grey powder derived from the direct chemical reaction of silicon and nitrogen. | |
| Silzot® SQ | AlzChem AG | Silzot® SQ is a fine powder derived from the direct chemical reaction of highly purified silicon and nitrogen. | |
| Silzot® TQ (Powder) | AlzChem AG | Silzot® TQ (Powder) is a grey powder derived from the direct chemical reaction of silicon and nitrogen. | |
| So-Thick 30 | PCI Group, Inc. | So-Thick 30 is a translucent, non-ionic, non-urethane based associative thickener. It is specifically designed for high quality latex paints, high gloss, semi gloss and flat finishes in interior or exterior applications. It provides flow, leveling and thi...展开 So-Thick 30 is a translucent, non-ionic, non-urethane based associative thickener. It is specifically designed for high quality latex paints, high gloss, semi gloss and flat finishes in interior or exterior applications. It provides flow, leveling and thinning enhancements, good color acceptance and sag resistance. It can also be used in adhesives, sealants and inks. 收起 | |
| SWASW | PCI Group, Inc. | SWASW is a nonionic, clear liquid comprised of a fluoropolymer/silicone glycol polymer hybrid superspreader and a superwetting agent. It can be used in both solvent and waterborne systems. It is designed to significantly reduce surface tension, improve fl...展开 SWASW is a nonionic, clear liquid comprised of a fluoropolymer/silicone glycol polymer hybrid superspreader and a superwetting agent. It can be used in both solvent and waterborne systems. It is designed to significantly reduce surface tension, improve flow, leveling, surface appearance and overall performance by direct addition into coating and ink systems. 收起 | |
| TA-816 | PCI Group, Inc. | TA-816 is a reactive siloxane polymer blend which can produce a rough or textured appearance to paints and coatings. It can be used with lacquers, alkyd, epoxy, melamine phenolic, polyester and urethane systems. | |
| TOYNOL® CATB-61 | Tianjin Surfychem T&D Co., Ltd. | TOYNOL® CATB-61, in the form of a transparent yellow liquid, is an alkyne alcohol catalyst that can be used in silicone coatings and adhesives. This product contains above 98% active content. Its boiling point is 150-151℃. | |
| TOYNOL® CATB-72 | Tianjin Surfychem T&D Co., Ltd. | TOYNOL® CATB-72, in the form of a transparent yellow liquid, is an alkyne alcohol catalyst that can be used in silicone coatings and adhesives. This product contains above 98% active content. Its boiling point is 170-172℃. | |
| TOYNOL® D-504 | Tianjin Surfychem T&D Co., Ltd. | TOYNOL® D-504, in the form of a pale yellow liquid, is a modified acetylenic diol nonionic surfactant. This product can be used as a non-foam wetting agent in water-borne pigments for inkjet inks, water-based pigment pastes, aqueous textile digital print...展开 TOYNOL® D-504, in the form of a pale yellow liquid, is a modified acetylenic diol nonionic surfactant. This product can be used as a non-foam wetting agent in water-borne pigments for inkjet inks, water-based pigment pastes, aqueous textile digital printing inks, water-based coatings, and paper coatings. It is dispersible in water. 收起 | |
| TOYNOL® DF-110B | Tianjin Surfychem T&D Co., Ltd. | TOYNOL® DF-110B, in the form of a clear, pale yellow liquid, is a macromolecular acetylenic diol. This product is a defoamer that can be used in waterborne inks, varnishes, adhesives, waterborne automotive coatings, and non-stick coatings, among other us...展开 TOYNOL® DF-110B, in the form of a clear, pale yellow liquid, is a macromolecular acetylenic diol. This product is a defoamer that can be used in waterborne inks, varnishes, adhesives, waterborne automotive coatings, and non-stick coatings, among other uses. It contains 50% active content and its flash point starts above 80℃. 收起 | |
| TOYNOL® DF-220 | Tianjin Surfychem T&D Co., Ltd. | TOYNOL® DF-220, in the form of an emulsion liquid, is a polyether defoamer. This product can be used in water-based adhesives, water-based printing inks, water-based automotive coatings, and paper coatings. It contains 100% active content and is dispers...展开 TOYNOL® DF-220, in the form of an emulsion liquid, is a polyether defoamer. This product can be used in water-based adhesives, water-based printing inks, water-based automotive coatings, and paper coatings. It contains 100% active content and is dispersed in water. 收起 | |
| TOYNOL® DF-220M | Tianjin Surfychem T&D Co., Ltd. | TOYNOL® DF-220M, in the form of an emulsion liquid, is a polyether defoamer. This product can be used in water-based adhesives, water-based printing inks, water-based automotive coatings, and paper coatings. It contains 50% active content and is dispers...展开 TOYNOL® DF-220M, in the form of an emulsion liquid, is a polyether defoamer. This product can be used in water-based adhesives, water-based printing inks, water-based automotive coatings, and paper coatings. It contains 50% active content and is dispersed in water. 收起 | |
| TOYNOL® DF-220S | Tianjin Surfychem T&D Co., Ltd. | TOYNOL® DF-220S, in the form of an emulsion liquid, is a polyether defoamer. This product can be used in water-based adhesives, water-based printing inks, water-based automotive coatings, and paper coatings. It contains 20% active content and is dispers...展开 TOYNOL® DF-220S, in the form of an emulsion liquid, is a polyether defoamer. This product can be used in water-based adhesives, water-based printing inks, water-based automotive coatings, and paper coatings. It contains 20% active content and is dispersed in water. 收起 | |
| TOYNOL® DF-58 | Tianjin Surfychem T&D Co., Ltd. | TOYNOL® DF-58, in the form of a pale yellow liquid, is a mineral oil. This product is a defoamer and foam controlling agent for water-based coatings, adhesives, printing inks, and paper coatings. It is slightly soluble in water and contains 100% active ...展开 TOYNOL® DF-58, in the form of a pale yellow liquid, is a mineral oil. This product is a defoamer and foam controlling agent for water-based coatings, adhesives, printing inks, and paper coatings. It is slightly soluble in water and contains 100% active content. 收起 | |
| TOYNOL® DF-58S | Tianjin Surfychem T&D Co., Ltd. | TOYNOL® DF-58S, in the form of a pale yellow liquid, is a mineral oil. This product is a defoamer and foam controlling agent for water-based coatings, adhesives, printing inks, and paper coatings. It is slightly soluble in water and contains 100% active...展开 TOYNOL® DF-58S, in the form of a pale yellow liquid, is a mineral oil. This product is a defoamer and foam controlling agent for water-based coatings, adhesives, printing inks, and paper coatings. It is slightly soluble in water and contains 100% active content. 收起 | |
| TOYNOL® DF-59 | Tianjin Surfychem T&D Co., Ltd. | TOYNOL® DF-59, in the form of a light-yellow transparent liquid, is an acetylenic diol-modified non-ionic surfactant. This product is a defoamer that can be used in water-based ink and varnishes, aqueous adhesives, water-borne automotive coatings, and pa...展开 TOYNOL® DF-59, in the form of a light-yellow transparent liquid, is an acetylenic diol-modified non-ionic surfactant. This product is a defoamer that can be used in water-based ink and varnishes, aqueous adhesives, water-borne automotive coatings, and paper coatings. This product is dispersible in water. 收起 | |
| TOYNOL® DF-62 | Tianjin Surfychem T&D Co., Ltd. | TOYNOL® DF-62, in the form of a translucent liquid, is a nonionic polyether. This product is a defoamer that can be used in water-based pressure-sensitive adhesives, label adhesives, textile coating emulsions, and building emulsions. It contains 30% act...展开 TOYNOL® DF-62, in the form of a translucent liquid, is a nonionic polyether. This product is a defoamer that can be used in water-based pressure-sensitive adhesives, label adhesives, textile coating emulsions, and building emulsions. It contains 30% active content. 收起 | |
| TOYNOL® DF-63 | Tianjin Surfychem T&D Co., Ltd. | TOYNOL® DF-63, in the form of a transparent liquid, is a nonionic polyether. This product is a defoamer that can be used in water-based pressure-sensitive adhesives, label adhesives, textile coating emulsions, and building emulsions. It contains 60% act...展开 TOYNOL® DF-63, in the form of a transparent liquid, is a nonionic polyether. This product is a defoamer that can be used in water-based pressure-sensitive adhesives, label adhesives, textile coating emulsions, and building emulsions. It contains 60% active content. 收起 | |
| TOYNOL® DF-64 | Tianjin Surfychem T&D Co., Ltd. | TOYNOL® DF-64, in the form of a transparent, pale yellow liquid, is a nonionic polyether. This product is a defoamer that can be used in water-based pressure-sensitive adhesives, label adhesives, textile coating emulsions, and building emulsions. It con...展开 TOYNOL® DF-64, in the form of a transparent, pale yellow liquid, is a nonionic polyether. This product is a defoamer that can be used in water-based pressure-sensitive adhesives, label adhesives, textile coating emulsions, and building emulsions. It contains 60% active content. 收起 | |
| TOYNOL® DF-66 | Tianjin Surfychem T&D Co., Ltd. | TOYNOL® DF-66, in the form of a translucent liquid, is a nonionic polyether. This product is a defoamer that can be used in water-based pressure-sensitive adhesives, label adhesives, textile coating emulsions, and building emulsions. It contains 50% act...展开 TOYNOL® DF-66, in the form of a translucent liquid, is a nonionic polyether. This product is a defoamer that can be used in water-based pressure-sensitive adhesives, label adhesives, textile coating emulsions, and building emulsions. It contains 50% active content. 收起 | |
| TOYNOL® DF-68 | Tianjin Surfychem T&D Co., Ltd. | TOYNOL® DF-68, in the form of a translucent liquid, is a nonionic polyether. This product is a defoamer that can be used in water-based pressure-sensitive adhesives, label adhesives, textile coating emulsions, and building emulsions. It contains 80% act...展开 TOYNOL® DF-68, in the form of a translucent liquid, is a nonionic polyether. This product is a defoamer that can be used in water-based pressure-sensitive adhesives, label adhesives, textile coating emulsions, and building emulsions. It contains 80% active content. 收起 | |
| TOYNOL® DF-70 | Tianjin Surfychem T&D Co., Ltd. | TOYNOL® DF-70, in the form of a pale yellow liquid, is a modified silicone oil and non-ionic alkynol compound surfactant. This product is a defoamer that can be used in water-based adhesives, water-based ink and varnishes, paper coatings, and water-based...展开 TOYNOL® DF-70, in the form of a pale yellow liquid, is a modified silicone oil and non-ionic alkynol compound surfactant. This product is a defoamer that can be used in water-based adhesives, water-based ink and varnishes, paper coatings, and water-based automotive coatings. It contains 30% active content and is slightly soluble in water. 收起 | |
| TOYNOL® DF-72 | Tianjin Surfychem T&D Co., Ltd. | TOYNOL® DF-72, in the form of a pale yellow liquid, is a modified silicone oil and non-ionic alkynol compound surfactant. This product is a defoamer that can be used in water-based adhesives, water-based ink and varnishes, paper coatings, and water-based...展开 TOYNOL® DF-72, in the form of a pale yellow liquid, is a modified silicone oil and non-ionic alkynol compound surfactant. This product is a defoamer that can be used in water-based adhesives, water-based ink and varnishes, paper coatings, and water-based automotive coatings. It contains 37% active content and is slightly soluble in water. 收起 | |
| TOYNOL® DF-80B | Tianjin Surfychem T&D Co., Ltd. | TOYNOL® DF-80B, in the form of a clear, pale yellow liquid, is a macromolecular acetylenic diol. This product is a defoamer that can be used in waterborne inks, varnishes, adhesives, waterborne automotive coatings, and non-stick coatings, among other use...展开 TOYNOL® DF-80B, in the form of a clear, pale yellow liquid, is a macromolecular acetylenic diol. This product is a defoamer that can be used in waterborne inks, varnishes, adhesives, waterborne automotive coatings, and non-stick coatings, among other uses. It contains 32% active content and its flash point starts above 80℃. 收起 | |
| TOYNOL® DF-80D | Tianjin Surfychem T&D Co., Ltd. | TOYNOL® DF-80D, in the form of a clear, pale yellow liquid, is a macromolecular acetylenic diol. This product is a defoamer that can be used in waterborne inks, varnishes, adhesives, waterborne automotive coatings, and non-stick coatings, among other use...展开 TOYNOL® DF-80D, in the form of a clear, pale yellow liquid, is a macromolecular acetylenic diol. This product is a defoamer that can be used in waterborne inks, varnishes, adhesives, waterborne automotive coatings, and non-stick coatings, among other uses. It contains 32% active content and its flash point starts above 100℃. 收起 | |
| TOYNOL® DF-80L | Tianjin Surfychem T&D Co., Ltd. | TOYNOL® DF-80L, in the form of a clear, pale yellow liquid, is a macromolecular acetylenic diol. This product is a defoamer that can be used in waterborne inks, varnishes, adhesives, waterborne automotive coatings, and non-stick coatings, among other use...展开 TOYNOL® DF-80L, in the form of a clear, pale yellow liquid, is a macromolecular acetylenic diol. This product is a defoamer that can be used in waterborne inks, varnishes, adhesives, waterborne automotive coatings, and non-stick coatings, among other uses. It contains 20% active content and its flash point starts above 100℃. 收起 | |
| TOYNOL® DF-80PG | Tianjin Surfychem T&D Co., Ltd. | TOYNOL® DF-80PG, in the form of a clear, pale yellow liquid, is a macromolecular acetylenic diol. This product is a defoamer that can be used in waterborne inks, varnishes, adhesives, waterborne automotive coatings, and non-stick coatings, among other us...展开 TOYNOL® DF-80PG, in the form of a clear, pale yellow liquid, is a macromolecular acetylenic diol. This product is a defoamer that can be used in waterborne inks, varnishes, adhesives, waterborne automotive coatings, and non-stick coatings, among other uses. It contains 50% active content and its flash point starts above 80℃. 收起 | |
| TOYNOL® DS-121 | Tianjin Surfychem T&D Co., Ltd. | TOYNOL® DS-121, in the form of a pale yellow liquid, is a dispersant for grinding pigments. This product is low-foaming and stabilizes color pastes well. It can be used in printing inks, coatings and pigment pastes. Its flash point starts above 100℃. | |
| TOYNOL® DS-136 | Tianjin Surfychem T&D Co., Ltd. | TOYNOL® DS-136, in the form of a brown liquid, is a dispersant for grinding pigments. This product is low-foaming and stabilizes color pastes well. It can be used in printing inks, coatings and in pigment pastes. Its flash point starts above 100℃. | |
| TOYNOL® DS-350 | Tianjin Surfychem T&D Co., Ltd. | TOYNOL® DS-350, in the form of a pale yellow liquid, is a modified acetylenic diol non-ionic surfactant. This product is a dispersible wetting agent that can be used in paper coatings. It contains 100% active content and is insoluble in water. | |
| TOYNOL® DS-5090 | Tianjin Surfychem T&D Co., Ltd. | TOYNOL® DS-5090, in the form of a pale yellow liquid, is a modified acetylenic diol non-ionic surfactant. This product is a dispersible wetting agent that can be used in paper coatings. It contains 66% active content. | |
| TOYNOL® DS-8090 | Tianjin Surfychem T&D Co., Ltd. | TOYNOL® DS-8090, in the form of a pale yellow liquid, is a modified acetylenic diol non-ionic surfactant. This product is a dispersible wetting agent that can be used in paper coatings. It contains 93% active content. | |
| TOYNOL® DS-950 | Tianjin Surfychem T&D Co., Ltd. | TOYNOL® DS-950, in the form of a pale yellow liquid, is a modified acetylenic diol non-ionic surfactant. This product is a dispersible wetting agent that can be used in paper coatings. It contains 100% active content and is self-dispersing in water. | |
| TOYNOL® DS-960 | Tianjin Surfychem T&D Co., Ltd. | TOYNOL® DS-960, in the form of a pale yellow liquid, is a modified acetylenic diol non-ionic surfactant. This product is a wetting agent that can be used in waterborne wood coatings, water-based industrial paints, plastic coatings, and glass coatings. I...展开 TOYNOL® DS-960, in the form of a pale yellow liquid, is a modified acetylenic diol non-ionic surfactant. This product is a wetting agent that can be used in waterborne wood coatings, water-based industrial paints, plastic coatings, and glass coatings. It contains 63% active content and is self-dispersing in water. 收起 | |
| TOYNOL® FS-204 | Tianjin Surfychem T&D Co., Ltd. | TOYNOL® FS-204, in the form of a waxy solid, is an acetylenic diol-based nonionic surfactant. This product is a defoaming wetting agent that can be used in waterborne inks, varnishes, adhesives, waterborne automotive coatings, and non-stick coatings, amo...展开 TOYNOL® FS-204, in the form of a waxy solid, is an acetylenic diol-based nonionic surfactant. This product is a defoaming wetting agent that can be used in waterborne inks, varnishes, adhesives, waterborne automotive coatings, and non-stick coatings, among other uses. It contains 100% active content. 收起 | |
| TOYNOL® FS-204A | Tianjin Surfychem T&D Co., Ltd. | TOYNOL® FS-204A, in the form of a pale yellow liquid, is an acetylenic diol-based nonionic surfactant. This product is a defoaming wetting agent that can be used in waterborne inks, varnishes, adhesives, waterborne automotive coatings, and non-stick coat...展开 TOYNOL® FS-204A, in the form of a pale yellow liquid, is an acetylenic diol-based nonionic surfactant. This product is a defoaming wetting agent that can be used in waterborne inks, varnishes, adhesives, waterborne automotive coatings, and non-stick coatings, among other uses. It contains 50% active content. 收起 | |
| TOYNOL® FS-204BC | Tianjin Surfychem T&D Co., Ltd. | TOYNOL® FS-204BC, in the form of a pale yellow liquid, is an acetylenic diol-based nonionic surfactant. This product is a defoaming wetting agent that can be used in waterborne inks, varnishes, adhesives, waterborne automotive coatings, and non-stick coa...展开 TOYNOL® FS-204BC, in the form of a pale yellow liquid, is an acetylenic diol-based nonionic surfactant. This product is a defoaming wetting agent that can be used in waterborne inks, varnishes, adhesives, waterborne automotive coatings, and non-stick coatings, among other uses. It contains 50% active content. 收起 | |
| TOYNOL® FS-204DPM | Tianjin Surfychem T&D Co., Ltd. | TOYNOL® FS-204DPM, in the form of a pale yellow liquid, is an acetylenic diol-based nonionic surfactant. This product is a defoaming wetting agent that can be used in waterborne inks, varnishes, adhesives, waterborne automotive coatings, and non-stick co...展开 TOYNOL® FS-204DPM, in the form of a pale yellow liquid, is an acetylenic diol-based nonionic surfactant. This product is a defoaming wetting agent that can be used in waterborne inks, varnishes, adhesives, waterborne automotive coatings, and non-stick coatings, among other uses. It contains 50% active content. 收起 |
