UL Prospector

成功!

成功保存搜索结果
Request Sample ADDITOL® P 791 Allnex - Powder Coating Resins 粉末涂料树脂 固体脂肪族聚酸酐固化剂,结合含缩水甘油基的固体丙烯酸树脂制备粉末涂料。基料比例与所采用缩水甘油基树脂的当量有关。适合丙烯酸应用
Request Sample ADDITOL® P 824 Allnex - Powder Coating Resins 粉末涂料树脂 流平促进母料,用于粉末涂料。在户外耐候羟基聚酯基体中含有15%的活性剂。用于要求光泽和流平的应用场合
Request Sample ADDITOL® P 890 Allnex - Powder Coating Resins 粉末涂料树脂 流平促进剂母料,适用于室内室外用透明粉末涂料。在羟基聚酯载体上含约10%的活性组分。在粉末涂料配方中的建议添加量为7-8%
Request Sample ADDITOL® P 891 Allnex - Powder Coating Resins 粉末涂料树脂 ADDITOL® P 891 is a flow promoter masterbatch suitable for use in clear powder coatings. ADDITOL® P 891 contains approximately 5% active substance in an outdoor resistant carboxylated polyester matrix.The addition of 7-10% on binder is suggested for the m...展开 ADDITOL® P 891 is a flow promoter masterbatch suitable for use in clear powder coatings. ADDITOL® P 891 contains approximately 5% active substance in an outdoor resistant carboxylated polyester matrix.The addition of 7-10% on binder is suggested for the manufacture of haze-free clear coatings with very good flow. 收起
Request Sample ADDITOL® P 896 Allnex - Powder Coating Resins 粉末涂料树脂 流平促进母料,适用于有色粉末涂料。
Request Sample ADDITOL® P 920 Allnex - Powder Coating Resins 粉末涂料树脂 催化剂母料,设计用于制造皱纹效果。在羟基聚酯基体中含有5%的活性物质。适合需要皱纹表面效果的应用
Request Sample ADDITOL® P 932 Allnex - Powder Coating Resins 粉末涂料树脂 ADDITOL® P 932 is an aliphatic urethane pre-polymer crosslinking agent for use with hydroxyl terminated polyester resins for the manufacture of polyurethane powder coatings.
Request Sample ADDITOL® P 950 Allnex - Powder Coating Resins 粉末涂料树脂 具有摩擦带电活性的母料,用于混合型,TGIC型,聚氨酯型和TGIC替换体系。户内户外均可使用
Request Sample ADDITOL® P 964 Allnex - Powder Coating Resins 粉末涂料树脂 催化剂母料,设计用于混合型、TGIC或Araldite PT-910体系
Request Sample ADDITOL® P 965 Allnex - Powder Coating Resins 粉末涂料树脂 一种芳香族氨基甲酸酯加合物,用作羟基聚酯树脂交联剂,用于制备聚氨酯粉末涂料
Request Sample ADDITOL® P 966 Allnex - Powder Coating Resins 粉末涂料树脂 ADDITOL® P 966 is a catalyst masterbatch for use in TGIC or ARALDITE® PT-910 systems. This resin contains 5% active ingredient in a superdurable polyester resin matrix. ADDITOL® P 966 is easily handled and greatly improves dispersion of the catalyst in po...展开 ADDITOL® P 966 is a catalyst masterbatch for use in TGIC or ARALDITE® PT-910 systems. This resin contains 5% active ingredient in a superdurable polyester resin matrix. ADDITOL® P 966 is easily handled and greatly improves dispersion of the catalyst in powder coating formulations when mixed with superdurable resins. This material can also be used with CRYLCOAT® 4420-0 and CRYLCOAT® 4430-0 at varying levels in dry-blend systems to achieve adjustable low gloss values. 收起
Request Sample BECKOPOX® EH 694 Allnex - Powder Coating Resins 粉末涂料树脂 BECKOPOX® EH 694是一种酸酐固化剂,可结合固体环氧树脂,OH-官能团聚酯或作为环氧/聚酯混合体系附加的交联剂,用于制备粉末涂料。基于BECKOPOX® EH 694的配方具有良好的耐化学品和耐过烘烤性能。
BURGESS 2211 Burgess Pigment Company BURGESS 2211 is a surface modified calcined aluminum silicate that has low warpage and high impact strength. This product is often used in urethane and polyester applications, and can also be used as an extender or filler in paints, coatings, adhesives, a...展开 BURGESS 2211 is a surface modified calcined aluminum silicate that has low warpage and high impact strength. This product is often used in urethane and polyester applications, and can also be used as an extender or filler in paints, coatings, adhesives, and sealants. 收起
BURGESS 30P® Burgess Pigment Company BURGESS 30P® is a flash calcined median particle size clay used extensively in PVC compounds for improving electricals. This product exhibits low specific gravity and excellent color, and can be used as an extender or filler in paints, coatings, adhesives...展开 BURGESS 30P® is a flash calcined median particle size clay used extensively in PVC compounds for improving electricals. This product exhibits low specific gravity and excellent color, and can be used as an extender or filler in paints, coatings, adhesives, and sealants. 收起
BURGESS 5178 Burgess Pigment Company BURGESS 5178 is hydrophobic and a chemical bond between the calcined clay and the polymer exists. This product has been designed to provide excellent wet and dry electrical properties through a proprietary surface treatment. It is often used as an extende...展开 BURGESS 5178 is hydrophobic and a chemical bond between the calcined clay and the polymer exists. This product has been designed to provide excellent wet and dry electrical properties through a proprietary surface treatment. It is often used as an extender or filler in paints, coatings, adhesives, and sealants. 收起
BURGESS CB Burgess Pigment Company BURGESS CB is a surface modified calcined aluminum silicate that has been designed for use in crosslinked polyethylene and polyester. This product can be used as an extender or filler in paints, coatings, adhesives, and sealants.
BURGESS ICEBERG® Burgess Pigment Company BURGESS ICEBERG® is a conventionally calcined median particle size, 91-93 GE brightness clay used as an extender of TiO2. It is used in trade sales interior/exterior flat paints and as a filler in polyurethane sealants. This product can provide better opa...展开 BURGESS ICEBERG® is a conventionally calcined median particle size, 91-93 GE brightness clay used as an extender of TiO2. It is used in trade sales interior/exterior flat paints and as a filler in polyurethane sealants. This product can provide better opacity, higher degree of whiteness, better tint strength, easy dispersion, and low moisture levels in moisture sensitive applications. 收起
BURGESS ICECAP KSF Burgess Pigment Company BURGESS ICECAP KSF is a medium particle size anhydrous (calcined) kaolin clay that is used extensively as a “mild abrasive agent” in various polish applications. This product is a very finely ground dry white powder that exhibits dispersion and extremely ...展开 BURGESS ICECAP KSF is a medium particle size anhydrous (calcined) kaolin clay that is used extensively as a “mild abrasive agent” in various polish applications. This product is a very finely ground dry white powder that exhibits dispersion and extremely low 325 (45 micron) mesh residue. 收起
BURGESS ICECAP K® Burgess Pigment Company BURGESS ICECAP K® is an excellent extender for TiO2 in coatings where a high hegman grind is required. It has good electricals, low compression set, and low water absorption. This product can be used as an extender or filler in paints, coatings, adhesives...展开 BURGESS ICECAP K® is an excellent extender for TiO2 in coatings where a high hegman grind is required. It has good electricals, low compression set, and low water absorption. This product can be used as an extender or filler in paints, coatings, adhesives, and sealants. 收起
BURGESS KE Burgess Pigment Company BURGESS KE is an uniquely processed silane modified anhydrous aluminum silicate designed for use in crosslinked polyethylene and polyester systems. This product is a very pure, high brightness, low residue, calcined kaolin that can be used as an extender ...展开 BURGESS KE is an uniquely processed silane modified anhydrous aluminum silicate designed for use in crosslinked polyethylene and polyester systems. This product is a very pure, high brightness, low residue, calcined kaolin that can be used as an extender or filler in paints, coatings, adhesives, and sealants. 收起
BURGESS NO. 10 Burgess Pigment Company BURGESS NO. 10 is a fine particle size, medium brightness hydrous kaolin clay. This product exhibits dispersion in water based, acid pH, alkyd, or solvent based coatings and inks, electrodeposition body primers, as well as EIFS.
BURGESS NO. 17 Burgess Pigment Company BURGESS NO. 17 is a fine particle size, high brightness hydrous kaolin clay used to extend TiO2 in semigloss paints and inks. This product is well ground, has excellent whiteness and dispersion, and high brightness.
BURGESS NO. 20 Burgess Pigment Company BURGESS NO. 20 is a fine particle size, medium brightness hydrous kaolin clay. This product is used in jacketing layer of wire and cable insulation compounds, rubber roll covers, polishing compounds and concrete curing compounds. It can also be used as an...展开 BURGESS NO. 20 is a fine particle size, medium brightness hydrous kaolin clay. This product is used in jacketing layer of wire and cable insulation compounds, rubber roll covers, polishing compounds and concrete curing compounds. It can also be used as an extender or filler in paints, coatings, adhesives, and sealants. 收起
BURGESS NO. 27 Burgess Pigment Company BURGESS NO. 27 is an ultra fine particle size, medium brightness hydrous kaolin clay. This product is used as an extender in semigloss, satin, and gloss paints.
BURGESS NO. 28 Burgess Pigment Company BURGESS NO. 28 is an ultra fine particle size, higher brightness hydrous kaolin clay. This product is used to extend TiO2 while maintaining tint strength and gloss. It is used extensively in water based satin and semigloss coating systems.
BURGESS NO. 30® Burgess Pigment Company BURGESS NO. 30® is a partially calcined clay used extensively in PVC compounds to improve insulation resistance. This product exhibits excellent dispersion and color uniformity, and can be used as an extender or filler in paints, coatings, adhesives, and ...展开 BURGESS NO. 30® is a partially calcined clay used extensively in PVC compounds to improve insulation resistance. This product exhibits excellent dispersion and color uniformity, and can be used as an extender or filler in paints, coatings, adhesives, and sealants. 收起
BURGESS NO. 40 Burgess Pigment Company BURGESS NO. 40 is a median particle size, medium brightness hydrous kaolin clay. This product is an acid pH clay exhibiting excellent dispersion properties, and can be used in trade sales coatings and adhesives.
BURGESS NO. 50® Burgess Pigment Company BURGESS NO. 50® is a high brightness, fine particle size calcined kaolin that is an extender of TiO2 in coatings or polymeric systems. This product facilitates reduction of prime pigment while maintaining opacity, whiteness, and tint strength of coatings ...展开 BURGESS NO. 50® is a high brightness, fine particle size calcined kaolin that is an extender of TiO2 in coatings or polymeric systems. This product facilitates reduction of prime pigment while maintaining opacity, whiteness, and tint strength of coatings and retention of physical properties in filled polymeric systems. 收起
BURGESS NO. 60 Burgess Pigment Company BURGESS NO. 60 is an acid pH, fine particle size, medium brightness hydrous kaolin clay with excellent dispersion properties. This product is used in inks, adhesives and industrial finishes, electrostatic deposition body primers, and EIFS.
BURGESS NO. 97 Burgess Pigment Company BURGESS NO. 97 is an ultra fine particle size, medium brightness hydrous kaolin clay that exhibits excellent tint strength. This product is a well-ground extender of TiO2 in semigloss, satin, and gloss paints.
BURGESS NO. 98 Burgess Pigment Company BURGESS NO. 98 is an ultra fine particle size, higher brightness hydrous kaolin clay that exhibits excellent tint strength and dispersion. This product is a well ground, premium extender of TiO2 in water based, solvent or alkyd semigloss, satin, and gloss...展开 BURGESS NO. 98 is an ultra fine particle size, higher brightness hydrous kaolin clay that exhibits excellent tint strength and dispersion. This product is a well ground, premium extender of TiO2 in water based, solvent or alkyd semigloss, satin, and gloss paints. 收起
BURGESS OPTIPOZZ® Burgess Pigment Company BURGESS OPTIPOZZ® is a high reactivity metakaolin produced by a patented process. This product increases chemical resistance and durability, and reduces shrinkage. It can be used as an extender or filler in paints, coatings, adhesives, and sealants.
BURGESS OPTIWHITE MX® Burgess Pigment Company BURGESS OPTIWHITE MX® is a flash calcined clay exhibiting GE Brightness and extension of TiO2, whiteness, touchup, and tint strength. This product is used extensively in flat or low sheen interior/exterior trade sales water-based, alkyd, or solvent-based ...展开 BURGESS OPTIWHITE MX® is a flash calcined clay exhibiting GE Brightness and extension of TiO2, whiteness, touchup, and tint strength. This product is used extensively in flat or low sheen interior/exterior trade sales water-based, alkyd, or solvent-based coatings by reducing the amount of TiO2 and lowering raw material costs while maintaining opacity, whiteness, and tint strength. 收起
BURGESS OPTIWHITE P® Burgess Pigment Company BURGESS OPTIWHITE P® is a flash calcined clay used extensively to extend TiO2. This product exhibits GE Brightness, improves touchup, scrub, and burnish resistance. It is used in flat interior trade sales paints which do not require maximum whiteness.
BURGESS OPTIWHITE® Burgess Pigment Company BURGESS OPTIWHITE® is a premium whiteness flash calcined extender for TiO2 exhibiting GE brightness used extensively in First Line interior/exterior flat or low sheen water based and alkyd paint systems. This product exhibits excellent whiteness retention...展开 BURGESS OPTIWHITE® is a premium whiteness flash calcined extender for TiO2 exhibiting GE brightness used extensively in First Line interior/exterior flat or low sheen water based and alkyd paint systems. This product exhibits excellent whiteness retention and hiding when embedded in coatings and polymers. It can provide excellent dispersion, high hiding, and improved film properties. 收起
BURGESS POLYCLAY Burgess Pigment Company BURGESS POLYCLAY is a fine particle size, medium brightness hydrous kaolin clay used in inks.
BURGESS THERMOGLACE H Burgess Pigment Company BURGESS THERMOGLACE H is a delaminated, fine particle size, medium brightness hydrous kaolin clay. This product is used in primers and trade sales coatings for the reduction of mud-cracking (micro-cracking due to film stress) and reduction of permeability...展开 BURGESS THERMOGLACE H is a delaminated, fine particle size, medium brightness hydrous kaolin clay. This product is used in primers and trade sales coatings for the reduction of mud-cracking (micro-cracking due to film stress) and reduction of permeability. 收起
Request Sample CRYLCOAT® 1501-6 Allnex - Powder Coating Resins 粉末涂料树脂 高反应活性羧基聚酯树脂,可用于制备50/50混合型粉末涂料。该树脂设计用于与低粘度环氧树脂一起使用,适合用于制备低温至130°C固化的MDF基材用涂料。基于该产品的涂料兼具良好的流平性、高光泽和耐化学品性能
Request Sample CRYLCOAT® 1506-0 Allnex - Powder Coating Resins 粉末涂料树脂 CRYLCOAT® 1506-0 is a highly reactive carboxylated polyester resin for use in the production of 50/50 hybrid powder coatings. Formulations based on CRYLCOAT® 1506-0 exhibit good overbake and solvent resistance, good mechanical properties and very good flo...展开 CRYLCOAT® 1506-0 is a highly reactive carboxylated polyester resin for use in the production of 50/50 hybrid powder coatings. Formulations based on CRYLCOAT® 1506-0 exhibit good overbake and solvent resistance, good mechanical properties and very good flow. 收起
Request Sample CRYLCOAT® 1506-6 Allnex - Powder Coating Resins 粉末涂料树脂 高反应活性羧基聚酯树脂,以50/50制备混合型粉末涂料。该树脂结合低粘度的环氧树脂用于制备纹理涂料。用于要求反应性、低温烘烤和纹理的应用场合
Request Sample CRYLCOAT® 1510-0 Allnex - Powder Coating Resins 粉末涂料树脂 CRYLCOAT® 1510-0 is a carboxylated polyester resin for use in the production of 50/50 hybrid powder coatings. Coatings based on CRYLCOAT® 1510-0 exhibit excellent flow, high gloss, and excellent wetting of fillers and pigments.
Request Sample CRYLCOAT® 1514-2 Allnex - Powder Coating Resins 粉末涂料树脂 中等反应活性的羧基树脂,设计用于50/50混合型粉末涂料。具有良好的流平和出色的耐过烘烤性能
Request Sample CRYLCOAT® 1540-0 Allnex - Powder Coating Resins 粉末涂料树脂 高反应活性羧基聚酯树脂,以50/50制备混合型粉末涂料。具有出色的流平性和高光泽,以及良好的填料和颜料润湿性。用于需要润湿的应用场合和器械应用
Request Sample CRYLCOAT® 1544-0 Allnex - Powder Coating Resins 粉末涂料树脂 CRYLCOAT® 1544-0 is a low reactive carboxyl functional polyester resin for use in the manufacture of 50/50 or 60/40 hybrid powder coatings. CRYLCOAT® 1544-0 is compatible with other carboxyl functional polyester resins and can be blended in all ratios to ...展开 CRYLCOAT® 1544-0 is a low reactive carboxyl functional polyester resin for use in the manufacture of 50/50 or 60/40 hybrid powder coatings. CRYLCOAT® 1544-0 is compatible with other carboxyl functional polyester resins and can be blended in all ratios to provide intermediate reactivity. 收起
Request Sample CRYLCOAT® 1545-6 Allnex - Powder Coating Resins 粉末涂料树脂 CRYLCOAT® 1545-6 is a tin-free highly reactive carboxylated polyester resin for use in 50/50 hybrid powder coatings suitable for heat sensitive substrates. Coatings based on CRYLCOAT® 1545-6 exhibit good mechanical properties and physical ageing stability...展开 CRYLCOAT® 1545-6 is a tin-free highly reactive carboxylated polyester resin for use in 50/50 hybrid powder coatings suitable for heat sensitive substrates. Coatings based on CRYLCOAT® 1545-6 exhibit good mechanical properties and physical ageing stability. 收起
Request Sample CRYLCOAT® 1572-0 Allnex - Powder Coating Resins 粉末涂料树脂 CRYLCOAT® 1572-0是一种高反应活性羧基官能团聚酯树脂,可用于制备50/50混合型粉末涂料。采用CRYLCOAT® 1572-0制备的涂料在130 °C固化后具有良好的机械性能
Request Sample CRYLCOAT® 1572-6 Allnex - Powder Coating Resins 粉末涂料树脂 CRYLCOAT® 1572-6 is a high reactive carboxyl functional polyester resin for use in the production of 50/50 hybrids powder coatings. Coatings made with CRYLCOAT® 1572-6 exhibit good mechanical properties when cured at a temperature level of 130 °C.
Request Sample CRYLCOAT® 1573-0 Allnex - Powder Coating Resins 粉末涂料树脂 中等反应活性羧基官能团聚酯树脂,结合环氧当量700-900的环氧树脂以50/50制备混合型粉末涂料。具有出色的流平性能和非常好的光泽。适合新型应用场合
Request Sample CRYLCOAT® 1574-6 Allnex - Powder Coating Resins 粉末涂料树脂 CRYLCOAT® 1574-6 is a highly reactive carboxylated polyester resin for use in the production of 50/50 hybrid powder coatings. The resin is particularly suitable for the production of coatings for cure at temperatures between 130° and 140° C on MDF substra...展开 CRYLCOAT® 1574-6 is a highly reactive carboxylated polyester resin for use in the production of 50/50 hybrid powder coatings. The resin is particularly suitable for the production of coatings for cure at temperatures between 130° and 140° C on MDF substrates. Coatings based on CRYLCOAT® 1574-6 combine good flow with high gloss. 收起
Request Sample CRYLCOAT® 1581-6 Allnex - Powder Coating Resins 粉末涂料树脂 CRYLCOAT® 1581-6 is an organo-tin free highly reactive carboxyl functional polyester resin for use in the production of 50/50 hybrid powder coatings. This resin is designed for use with low viscosity epoxy resins and is suitable for the production of coat...展开 CRYLCOAT® 1581-6 is an organo-tin free highly reactive carboxyl functional polyester resin for use in the production of 50/50 hybrid powder coatings. This resin is designed for use with low viscosity epoxy resins and is suitable for the production of coatings at cure temperatures as low as 130° C on MDF substrates. 收起
Request Sample CRYLCOAT® 1593-0 Allnex - Powder Coating Resins 粉末涂料树脂 高反应活性羧基聚酯树脂,可结合环氧树脂EEW 700-900按比例50/50制备混合型粉末涂料。基于Crylcoat™ 1593-0的涂料结合了良好的流平性和良好的光泽。用于新一代要求中温烘烤的应用场合
Request Sample CRYLCOAT® 1616-2 Allnex - Powder Coating Resins 粉末涂料树脂 低反应活性羧基官能团聚酯树脂,具有高Tg值,结合环氧当量700-900的环氧树脂以60/40制备混合型粉末涂料。具有出色的流平性能和非常好的光泽。适合新生代和要求高Tg的应用场合
Request Sample CRYLCOAT® 1620-0 Allnex - Powder Coating Resins 粉末涂料树脂 羧基官能团聚酯树脂,与环氧树脂EEW 700-900以50/50到60/40比例制备混合型粉末涂料。适合器械,金属制办公家具应用
Request Sample CRYLCOAT® 1622-0 Allnex - Powder Coating Resins 粉末涂料树脂 低反应活性羧基官能团聚酯树脂,结合环氧树脂EEW 700-900,按50/50到60/40比例制造混合型粉末涂料。用于要求流平、低光泽的应用场合以及器械和汽车应用
Request Sample CRYLCOAT® 1626-0 Allnex - Powder Coating Resins 粉末涂料树脂 CRYLCOAT® 1626-0 is a carboxylated polyester resin for use in medium-cure 60/40 hybrid powder coatings. Formulations based on CRYLCOAT® 1626-0 exhibit excellent flow and can be used in economical formulations.
Request Sample CRYLCOAT® 1627-0 Allnex - Powder Coating Resins 粉末涂料树脂 羧基树脂,与环氧树脂EEW 700-900以60-40比例制备混合型粉末涂料。结合了出色的流平性和非常好的光泽。适合新一代要求良好流平性、良好消光性、高Tg的应用场合和金属制办公家具应用
Request Sample CRYLCOAT® 1630-0 Allnex - Powder Coating Resins 粉末涂料树脂 低反应活性羧基官能团聚酯树脂,结合环氧树脂EEW 700-900,按50/50到60/40比例使用
Request Sample CRYLCOAT® 1631-0 Allnex - Powder Coating Resins 粉末涂料树脂 中等反应活性羧基官能团聚酯树脂,结合环氧当量700-900的环氧树脂以50/50到60/40制备混合型粉末涂料。具有良好的储藏稳定性。适合要求高Tg和流平性的应用场合
Request Sample CRYLCOAT® 1632-0 Allnex - Powder Coating Resins 粉末涂料树脂 CRYLCOAT® 1632-0是一种中等反应活性羧基官能团聚酯树脂,结合环氧当量为700-900的环氧树脂,以50/50到60/40制备混合型粉末涂料
Request Sample CRYLCOAT® 1648-2 Allnex - Powder Coating Resins 粉末涂料树脂 羧基聚酯树脂,可用于制备中速固化的60/40混合型粉末涂料。基于CRYLCOAT® E 04148的涂料具有良好的流平、出色的机械性能和耐水煮测试性能。CRYLCOAT® E 04148是一支正在开发中的产品
Request Sample CRYLCOAT® 1650-2 Allnex - Powder Coating Resins 粉末涂料树脂 低反应活性羧基树脂,用于制备60/40混合型粉末涂料。结合了高光泽和出色的流平性能。适合消光和设备上应用
Request Sample CRYLCOAT® 1660-0 Allnex - Powder Coating Resins 粉末涂料树脂 低反应活性、羧基官能团聚酯树脂,设计用于制备60/40混合型粉末涂料。当使用高含量填料时,它仍具有良好的柔韧性、高光泽和杰出的流平。应用于需要流平的场合和金属办公家具
Request Sample CRYLCOAT® 1660-5 Allnex - Powder Coating Resins 粉末涂料树脂 CRYLCOAT® 1660-5 is a carboxyl functional poly-ester resin for use in medium-reactive 60/40 hybrid powder coatings. Coatings based on CRYLCOAT® 1660-5 exhibit good flexibility, high gloss, and outstanding flow using high amounts of filler.
Request Sample CRYLCOAT® 1680-6 Allnex - Powder Coating Resins 粉末涂料树脂 高反应活性羧基聚酯树脂,用于制备60/40混合型粉末涂料。结合了良好的柔韧性和流平性以及高光泽。使用Crylcoat™ 1680-6的配方中可以加入较多的填料。用于要求反应活性、中温烘烤、流平性和填料负载的应用场合
Request Sample CRYLCOAT® 1690-0 Allnex - Powder Coating Resins 粉末涂料树脂 羧基聚酯树脂,可用于制备180°C固化的60/40混合型粉末涂料。基于CRYLCOAT® 1690-0的涂料具有杰出的流平性和出色的机械性能以及耐清洗剂性能
Request Sample CRYLCOAT® 1701-0 Allnex - Powder Coating Resins 粉末涂料树脂 高反应活性饱和聚酯树脂,用于70/30混合型粉末涂料。具有出色的机械性能,非常好的流平性和耐过烘烤性能。用于要求高Tg和中等烘烤温度的应用场合
Request Sample CRYLCOAT® 1702-0 Allnex - Powder Coating Resins 粉末涂料树脂 饱和聚酯树脂,用于制备70/30混合型粉末涂料。具有出色的流平以及低反应活性和固化速度,可通过促进剂加速。适合要求流平的应用场合
Request Sample CRYLCOAT® 1703-1 Allnex - Powder Coating Resins 粉末涂料树脂 不含TMA,具有摩擦带电活性的羧基聚酯树脂,设计用于制备70/30混合型粉末涂料。具有出色的流平和良好的光泽。适合要求过烘烤性能的应用场合
Request Sample CRYLCOAT® 1716-0 Allnex - Powder Coating Resins 粉末涂料树脂 中等反应活性羧基聚酯树脂,设计用于制备70/30混合型粉末涂料。具有良好的流平性能和非常高的光泽。可结合Vestagon B68 (Degussa)制备低光涂料。适合要求流平和金属办公家具应用场合
Request Sample CRYLCOAT® 1732-0 Allnex - Powder Coating Resins 粉末涂料树脂 CRYLCOAT® 1732-0 is a carboxyl functional polyester resin for use with epoxy resins in a 70/30 ratio to manufacture low bake hybrid powder coatings suitable for curing at a temperature level of 160 °C. Formulations based on CRYLCOAT® 1732-0 provide good f...展开 CRYLCOAT® 1732-0 is a carboxyl functional polyester resin for use with epoxy resins in a 70/30 ratio to manufacture low bake hybrid powder coatings suitable for curing at a temperature level of 160 °C. Formulations based on CRYLCOAT® 1732-0 provide good flow and gloss combined with improved flexibility and ageing resistance. 收起
Request Sample CRYLCOAT® 1756-0 Allnex - Powder Coating Resins 粉末涂料树脂 CRYLCOAT® 1756-0 is a highly reactive, TMA-free carboxylated polyester resin for use in the production of 70/30 hybrid powder coatings. Formulations based on CRYLCOAT® 1756-0 exhibit excellent flow and good gloss.
Request Sample CRYLCOAT® 1770-0 Allnex - Powder Coating Resins 粉末涂料树脂 中等反应活性羧基官能团聚酯树脂,结合环氧当量700-900的环氧树脂以70/30制备混合型粉末涂料。可与Crylcoat™ 1783-0以任意比例混合,提供中间反应活性。适合金属办公家具应用场合
Request Sample CRYLCOAT® 1781-0 Allnex - Powder Coating Resins 粉末涂料树脂 中等反应活性羧基官能团聚酯树脂,具有高Tg,结合环氧当量700-900的环氧树脂以70/30制备混合型粉末涂料。具有良好的流平性和非常好的光泽。适合新型,要求高Tg,流平性和金属办公家具应用场合
Request Sample CRYLCOAT® 1791-2 Allnex - Powder Coating Resins 粉末涂料树脂 中等反应活性羧基官能团聚酯树脂,可与环氧当量700-900的环氧树脂,以70/30的比例制备混合型粉末涂料。含CRYLCOAT® E 04281的配方具有良好的流平、机械性能以及非常好的燃气炉耐受性
Request Sample CRYLCOAT® 1843-0 Allnex - Powder Coating Resins 粉末涂料树脂 羧基官能团聚酯树脂,与环氧树脂EEW 700-900以80/20的比例制备混合型粉末涂料。适合新一代要求高Tg的应用场合
Request Sample CRYLCOAT® 2401-2 Allnex - Powder Coating Resins 粉末涂料树脂 低反应活性羧基聚酯树脂,与TGIC,以93/7制备粉末涂料。具有杰出的流平性,高柔韧性和出色的户外耐候性。适合要求流平性能的应用场合
Request Sample CRYLCOAT® 2409-0 Allnex - Powder Coating Resins 粉末涂料树脂 高反应活性,无TMA的羧基聚酯树脂,结合TGIC用于制造粉末涂料。具有杰出的流平性,出色的户外耐候性,可稳定地用于直燃式燃气炉
Request Sample CRYLCOAT® 2411-2 Allnex - Powder Coating Resins 粉末涂料树脂 CRYLCOAT® 2411-2 is a carboxylated polyester resin for use in 93/7 TGIC powder coatings. Coatings based on CRYLCOAT® 2411-2 exhibit outstanding flow, very good flexibility, improved ageing stability and excellent outdoor durability.
Request Sample CRYLCOAT® 2415-2 Allnex - Powder Coating Resins 粉末涂料树脂 CRYLCOAT® 2415-2 is a carboxylated polyester resin for use with TGIC in a 90/10 ratio to manufacture powder coatings preferably smooth G 20 matte dry blend systems in com- bination with CRYLCOAT® 2452-2. Formulations based on CRYLCOAT® 2415-2 exhibit good...展开 CRYLCOAT® 2415-2 is a carboxylated polyester resin for use with TGIC in a 90/10 ratio to manufacture powder coatings preferably smooth G 20 matte dry blend systems in com- bination with CRYLCOAT® 2452-2. Formulations based on CRYLCOAT® 2415-2 exhibit good flow, high solvent resistance, excellent outdoor weathering resistance and outstanding storage stability. 收起
Request Sample CRYLCOAT® 2419-2 Allnex - Powder Coating Resins 粉末涂料树脂 低反应活性羧基聚酯树脂,可与TGIC或Primid® XL 552固化。基于CRYLCOAT® E 04219的配方需要的固化剂量低,具有良好的过烘烤耐受性和户外耐候性
Request Sample CRYLCOAT® 2421-5 Allnex - Powder Coating Resins 粉末涂料树脂 中等反应活性,不含TMA的羧基聚酯树脂,结合TGIC使用。具有杰出的流平性能,并且对热稳定。可考虑用于PCM应用场合。适合卷材和PCM应用
Request Sample CRYLCOAT® 2425-0 Allnex - Powder Coating Resins 粉末涂料树脂 中等反应活性羧基官能团聚酯树脂,用于配制TGIC固化的粉末涂料。含有Crylcoat™ 2425-0的配方具有良好的户外耐久性,良好的流平性和机械性能。适合要求高Tg的应用场合,汽车以及草坪和花园器械应用
Request Sample CRYLCOAT® 2430-0 Allnex - Powder Coating Resins 粉末涂料树脂 羧基聚酯树脂,用于TGIC或PT-910固化粉末涂料。用Araldite PT-910制备的涂料配方具有高玻璃化转变温度。适合要求高Tg的应用场合和卡车底盘应用
Request Sample CRYLCOAT® 2431-0 Allnex - Powder Coating Resins 粉末涂料树脂 羧基聚酯树脂,200° C下固化。具有良好的流平性,高耐溶剂性,出色的户外耐候性和杰出的储存稳定性。适合低光干混涂料和建材应用
Request Sample CRYLCOAT® 2432-0 Allnex - Powder Coating Resins 粉末涂料树脂 CRYLCOAT® 2432-0 is a carboxylated polyester resin for use with TGIC in a 96/4 ratio for the production of powder coatings.Coatings based on CRYLCOAT® 2432-0 can be dry-blended with CRYLCOAT® 2414-0 based powders to give matte coatings that exhibit good s...展开 CRYLCOAT® 2432-0 is a carboxylated polyester resin for use with TGIC in a 96/4 ratio for the production of powder coatings.Coatings based on CRYLCOAT® 2432-0 can be dry-blended with CRYLCOAT® 2414-0 based powders to give matte coatings that exhibit good smoothness and good outdoor durability. 收起
Request Sample CRYLCOAT® 2433-2 Allnex - Powder Coating Resins 粉末涂料树脂 羧基聚酯树脂,设计用于93/7 TGIC快速固化粉末涂料配方。具有良好的流平性,高柔韧性以及出色的户外耐候性。适合要求反应活性的应用场合
Request Sample CRYLCOAT® 2437-2 Allnex - Powder Coating Resins 粉末涂料树脂 CRYLCOAT® 2437-2 is a TMA-free carboxyl functional polyester resin for use with TGIC in the manufacture of powder coatings. Formulations based on CRYLCOAT® 2437-2 are non-blooming and exhibit outstanding flow, excellent outdoor durability and are stabiliz...展开 CRYLCOAT® 2437-2 is a TMA-free carboxyl functional polyester resin for use with TGIC in the manufacture of powder coatings. Formulations based on CRYLCOAT® 2437-2 are non-blooming and exhibit outstanding flow, excellent outdoor durability and are stabilized for direct fired gas ovens. 收起
Request Sample CRYLCOAT® 2440-2 Allnex - Powder Coating Resins 粉末涂料树脂 羧基聚酯树脂,用于93/7 TGIC粉末涂料。具有杰出的流平性,良好的柔韧性和出色的户外耐候性
Request Sample CRYLCOAT® 2441-2 Allnex - Powder Coating Resins 粉末涂料树脂 CRYLCOAT® 2441-2 is a carboxylated polyester resin for use in 93/7 TGIC powder coatings. Coatings based on CRYLCOAT® 2441-2 exhibit outstanding flow, very good flexibility, improved ageing stability and excellent outdoor durability.
Request Sample CRYLCOAT® 2441-2HR Allnex - Powder Coating Resins 粉末涂料树脂 羧基聚酯树脂,用于93/7 TGIC粉末涂料。具有杰出的流平性,非常好的柔韧性,出色的户外耐候性和非常好的储存稳定性。适合建材,HVAC和汽车应用
Request Sample CRYLCOAT® 2441-3 Allnex - Powder Coating Resins 粉末涂料树脂 羧基聚酯,用于制备93/7 TGIC粉末涂料。结合了良好的机械性能和出色的流平性,具有摩擦带电性
Request Sample CRYLCOAT® 2443-3 Allnex - Powder Coating Resins 粉末涂料树脂 CRYLCOAT® 2443-3 is a tribo enhanced carboxyl functional polyester resin for the formulation of powder coatings with 7% TGIC.
Request Sample CRYLCOAT® 2450-2 Allnex - Powder Coating Resins 粉末涂料树脂 中等反应活性羧基聚酯树脂,结合TGIC以93/7制备粉末涂料。具有良好的流平性能,良好的柔韧性和出色的户外耐候性。适合建材应用场合
Request Sample CRYLCOAT® 2451-6 Allnex - Powder Coating Resins 粉末涂料树脂 CRYLCOAT® 2451-6 is a low viscosity carboxyl- functional polyester resin for use with TGIC in the production of low bake powder coatings as shown in cure curve for 93/7 ratio. Coatings based on CRYLCOAT® 2451-6 cured at 10 min x 150°C combine excellent fl...展开 CRYLCOAT® 2451-6 is a low viscosity carboxyl- functional polyester resin for use with TGIC in the production of low bake powder coatings as shown in cure curve for 93/7 ratio. Coatings based on CRYLCOAT® 2451-6 cured at 10 min x 150°C combine excellent flexibility, adhesion, gloss and film hardness. 收起
Request Sample CRYLCOAT® 2452-2 Allnex - Powder Coating Resins 粉末涂料树脂 羧基聚酯树脂,200°C下固化。具有良好的流平性,高耐溶剂性,出色的户外耐候性和杰出的储存稳定性。用于低光干混涂料和建材应用
Request Sample CRYLCOAT® 2453-2 Allnex - Powder Coating Resins 粉末涂料树脂 CRYLCOAT® 2453-2 is a carboxyl functional polyester resin for use with 7% TGIC in the production of powder coatings. Formulations based on CRYLCOAT® 2453-2 exhibit good flow, excellent outdoor durability, flexibility and improved boiling water resistance.
Request Sample CRYLCOAT® 2454-2 Allnex - Powder Coating Resins 粉末涂料树脂 CRYLCOAT® 2454-2 is a carboxyl functional polyester resin for use with 7% TGIC in the production of powder coatings. Formulations based on CRYLCOAT® 2454-2 exhibit out-standing flow, excellent outdoor durability, very good flexibility, physical aging and ...展开 CRYLCOAT® 2454-2 is a carboxyl functional polyester resin for use with 7% TGIC in the production of powder coatings. Formulations based on CRYLCOAT® 2454-2 exhibit out-standing flow, excellent outdoor durability, very good flexibility, physical aging and storage stability. 收起
Request Sample CRYLCOAT® 2468-5 Allnex - Powder Coating Resins 粉末涂料树脂 CRYLCOAT® 2468-5 is a low reactive, carboxyl functional polyester resin for use with 7% TGIC in the production of industrial powder coatings. CRYLCOAT® 2468-5 has good suitability to formulate matte coatings. Formulations based on CRYLCOAT® 2468-5 exhibit...展开 CRYLCOAT® 2468-5 is a low reactive, carboxyl functional polyester resin for use with 7% TGIC in the production of industrial powder coatings. CRYLCOAT® 2468-5 has good suitability to formulate matte coatings. Formulations based on CRYLCOAT® 2468-5 exhibit good outdoor durability, flow and mechanical properties. 收起
Request Sample CRYLCOAT® 2471-4 Allnex - Powder Coating Resins 粉末涂料树脂 羧基聚酯树脂,与TGIC以93/7制备透明户外耐候粉末涂料。具有最佳流平性和透明度。适合要求流平的应用场合
Request Sample CRYLCOAT® 2472-4 Allnex - Powder Coating Resins 粉末涂料树脂 羧基聚酯树脂,与TGIC以93/7制备透明户外耐候粉末涂料。具有最佳流平性和透明度。适合要求高Tg的应用场合