| Aliphatic C5 Hydrocarbon Resin E1102 | Aquent Impex | Aliphatic C5 Hydrocarbon Resin E1102 is an amorphous, glassy, low-molecular-weight hydrocarbon polymer that promotes adhesion and tack in hot-melt and pressure-sensitive adhesives. Aliphatic C5 Hydrocarbon Resin E1102 has an initial colour (YI) value of 2...展开 Aliphatic C5 Hydrocarbon Resin E1102 is an amorphous, glassy, low-molecular-weight hydrocarbon polymer that promotes adhesion and tack in hot-melt and pressure-sensitive adhesives. Aliphatic C5 Hydrocarbon Resin E1102 has an initial colour (YI) value of 28. It can also be used as a modifier in polymer & rubber compounding and film applications. 收起 | |
| Aliphatic C5 Hydrocarbon Resin E1202 | Aquent Impex | Aliphatic C5 Hydrocarbon Resin E1202 is a amorphous, glassy, low-molecular-weight hydrocarbon polymer that promotes adhesion and tack in hot-melt and pressure-sensitive adhesives. Aliphatic C5 Hydrocarbon Resin E1202 has an initial colour (YI) value of 23...展开 Aliphatic C5 Hydrocarbon Resin E1202 is a amorphous, glassy, low-molecular-weight hydrocarbon polymer that promotes adhesion and tack in hot-melt and pressure-sensitive adhesives. Aliphatic C5 Hydrocarbon Resin E1202 has an initial colour (YI) value of 23. It can also be used as a modifier in polymer & rubber compounding and film applications. 收起 | |
| Aliphatic C5 Hydrocarbon Resin E1204 LS | Aquent Impex | Aliphatic C5 Hydrocarbon Resin E1204 LS is a amorphous, glassy, low-molecular-weight hydrocarbon polymer that promotes adhesion and tack in hot-melt and pressure-sensitive adhesives. Aliphatic C5 Hydrocarbon Resin E1204 LS has an initial colour (YI) value...展开 Aliphatic C5 Hydrocarbon Resin E1204 LS is a amorphous, glassy, low-molecular-weight hydrocarbon polymer that promotes adhesion and tack in hot-melt and pressure-sensitive adhesives. Aliphatic C5 Hydrocarbon Resin E1204 LS has an initial colour (YI) value of 31. It can also be used as a modifier in polymer & rubber compounding and film applications. 收起 | |
| Aliphatic C5 Hydrocarbon Resin E1304 | Aquent Impex | Aliphatic C5 Hydrocarbon Resin E1304 is a amorphous, glassy, low-molecular-weight hydrocarbon polymer that promotes adhesion and tack in hot-melt and pressure-sensitive adhesives. Aliphatic C5 Hydrocarbon Resin E1304 has an initial colour (YI) value of 29...展开 Aliphatic C5 Hydrocarbon Resin E1304 is a amorphous, glassy, low-molecular-weight hydrocarbon polymer that promotes adhesion and tack in hot-melt and pressure-sensitive adhesives. Aliphatic C5 Hydrocarbon Resin E1304 has an initial colour (YI) value of 29. It can also be used as a modifier in polymer & rubber compounding and film applications. 收起 | |
| Aliphatic C5 Hydrocarbon Resin E1310 | Aquent Impex | Aliphatic C5 Hydrocarbon Resin E1310 is a amorphous, glassy, low-molecular-weight hydrocarbon polymer that promotes adhesion and tack in hot-melt and pressure-sensitive adhesives. Aliphatic C5 Hydrocarbon Resin E1310 has an initial colour (YI) value of 25...展开 Aliphatic C5 Hydrocarbon Resin E1310 is a amorphous, glassy, low-molecular-weight hydrocarbon polymer that promotes adhesion and tack in hot-melt and pressure-sensitive adhesives. Aliphatic C5 Hydrocarbon Resin E1310 has an initial colour (YI) value of 25. It can also be used as a modifier in polymer & rubber compounding and film applications. 收起 | |
| Aliphatic C5 Hydrocarbon Resin E1401 | Aquent Impex | Aliphatic C5 Hydrocarbon Resin E1401 is a amorphous, glassy, low-molecular-weight hydrocarbon polymer that promotes adhesion and tack in hot-melt and pressure-sensitive adhesives. Aliphatic C5 Hydrocarbon Resin E1401 has an initial colour (YI) value of 31...展开 Aliphatic C5 Hydrocarbon Resin E1401 is a amorphous, glassy, low-molecular-weight hydrocarbon polymer that promotes adhesion and tack in hot-melt and pressure-sensitive adhesives. Aliphatic C5 Hydrocarbon Resin E1401 has an initial colour (YI) value of 31. It can also be used as a modifier in polymer & rubber compounding and film applications. 收起 | |
| Aliphatic C5 Hydrocarbon Resin E2203 LC | Aquent Impex | Aliphatic C5 Hydrocarbon Resin E2203 LC is a tackifier resin which provides tack and adherence to varied surfaces and also influence through low color, odorless, and stable product. As a tackifier, it offers high thermal stability, light color, polymer co...展开 Aliphatic C5 Hydrocarbon Resin E2203 LC is a tackifier resin which provides tack and adherence to varied surfaces and also influence through low color, odorless, and stable product. As a tackifier, it offers high thermal stability, light color, polymer compatibility, and low odor. Aliphatic C5 Hydrocarbon Resin E2203 LC has an initial colour (YI) value of 23. 收起 | |
| Aliphatic C5 Hydrocarbon Resin ECR 213 | Aquent Impex | Aliphatic C5 Hydrocarbon Resin ECR 213 is a tackifier resin which provides tack and adherence to varied surfaces and also influence through low color, odorless, and stable product. As a tackifier, it offers high thermal stability, light color, polymer com...展开 Aliphatic C5 Hydrocarbon Resin ECR 213 is a tackifier resin which provides tack and adherence to varied surfaces and also influence through low color, odorless, and stable product. As a tackifier, it offers high thermal stability, light color, polymer compatibility, and low odor. Aliphatic C5 Hydrocarbon Resin ECR 213 has an initial colour (YI) value of 87. 收起 | |
| Aliphatic C5 Hydrocarbon Resin ECR 288S | Aquent Impex | Aliphatic C5 Hydrocarbon Resin ECR 288S is a amorphous, glassy, low-molecular-weight hydrocarbon polymer that promotes adhesion and tack in hot-melt and pressure-sensitive adhesives. Aliphatic C5 Hydrocarbon Resin ECR 288S has an initial colour (YI) value...展开 Aliphatic C5 Hydrocarbon Resin ECR 288S is a amorphous, glassy, low-molecular-weight hydrocarbon polymer that promotes adhesion and tack in hot-melt and pressure-sensitive adhesives. Aliphatic C5 Hydrocarbon Resin ECR 288S has an initial colour (YI) value of 31. It can also be used as a modifier in polymer & rubber compounding and film applications. 收起 | |
| Aliphatic C5 Hydrocarbon Resin ECR 807 | Aquent Impex | Aliphatic C5 Hydrocarbon Resin ECR 807 is a tackifier resin which provides tack and adherence to varied surfaces and also influence through low color, odorless, and stable product. As a tackifier, it offers high thermal stability, light color, polymer com...展开 Aliphatic C5 Hydrocarbon Resin ECR 807 is a tackifier resin which provides tack and adherence to varied surfaces and also influence through low color, odorless, and stable product. As a tackifier, it offers high thermal stability, light color, polymer compatibility, and low odor. Aliphatic C5 Hydrocarbon Resin ECR 807 has an initial colour (YI) value of 32. 收起 | |
| Aqualac AYD-127 | Aquent Impex | Aqualac AYD-127 is a high quality, high performance, easy to use basic epoxy resin. It is colorless or yellow viscous liquid with low toxicity. Applications include use in coatings, adhesives, anticorrosion, electric insulation, laminated plates and potti...展开 Aqualac AYD-127 is a high quality, high performance, easy to use basic epoxy resin. It is colorless or yellow viscous liquid with low toxicity. Applications include use in coatings, adhesives, anticorrosion, electric insulation, laminated plates and potting fields or used as the raw material for high –grade epoxy resin processing. It has an epoxy equivalences of 180-190 (g/eq). 收起 | |
| Aqualac AYD-128 | Aquent Impex | Aqualac AYD-128 is a high quality, high performance, easy to use basic epoxy resin. It is colorless or yellow viscous liquid with low toxicity. Applications include use in coatings, adhesives, anticorrosion, electric insulation, laminated plates and potti...展开 Aqualac AYD-128 is a high quality, high performance, easy to use basic epoxy resin. It is colorless or yellow viscous liquid with low toxicity. Applications include use in coatings, adhesives, anticorrosion, electric insulation, laminated plates and potting fields or used as the raw material for high –grade epoxy resin processing. It has an epoxy equivalences of 184-194 (g/eq). 收起 | |
| Aqualac AYD-801 | Aquent Impex | Aqualac AYD-801 is a light yellow functional epoxy resin with low toxicity, characterized by higher softening point with wide molecule weight distribution. It is of high-molecule-weight compound of even polymerization degree. The product of such material ...展开 Aqualac AYD-801 is a light yellow functional epoxy resin with low toxicity, characterized by higher softening point with wide molecule weight distribution. It is of high-molecule-weight compound of even polymerization degree. The product of such material has stronger impact resistance and flexibility. It is mainly used in coating and painting business. Aqualac AYD-801 has and epoxy equivalent of 450~500 (g/eq) and softening point of 65~75 (℃). 收起 | |
| Aqualac AYD-802 | Aquent Impex | Aqualac AYD-802 is a light yellow functional epoxy resin with low toxicity, characterized by higher softening point with wide molecule weight distribution. It is of high-molecule-weight compound of even polymerization degree. The product of such material ...展开 Aqualac AYD-802 is a light yellow functional epoxy resin with low toxicity, characterized by higher softening point with wide molecule weight distribution. It is of high-molecule-weight compound of even polymerization degree. The product of such material has stronger impact resistance and flexibility. It is mainly used in coating and painting business. Aqualac AYD-802 has and epoxy equivalent of 600~700 (g/eq) and softening point of 81~89 (℃). 收起 | |
| Aqualac AYD-803 | Aquent Impex | Aqualac AYD-803 is a light yellow functional epoxy resin with low toxicity, characterized by higher softening point with wide molecule weight distribution. It is of high-molecule-weight compound of even polymerization degree. The product of such material ...展开 Aqualac AYD-803 is a light yellow functional epoxy resin with low toxicity, characterized by higher softening point with wide molecule weight distribution. It is of high-molecule-weight compound of even polymerization degree. The product of such material has stronger impact resistance and flexibility. It is mainly used in coating and painting business. Aqualac AYD-803 has and epoxy equivalent of 700~900 (g/eq) and softening point of 90~96 (℃). 收起 | |
| Aqualac AYD-803U | Aquent Impex | Aqualac AYD-804 is a light yellow functional epoxy resin with low toxicity, characterized by higher softening point with wide molecule weight distribution. It is of high-molecule-weight compound of even polymerization degree. The product of such material ...展开 Aqualac AYD-804 is a light yellow functional epoxy resin with low toxicity, characterized by higher softening point with wide molecule weight distribution. It is of high-molecule-weight compound of even polymerization degree. The product of such material has stronger impact resistance and flexibility. It is mainly used in coating and painting business. Aqualac AYD-804 has and epoxy equivalent of 900~1000 (g/eq) and softening point of 96~107 (℃). 收起 | |
| Aqualac AYD-804 | Aquent Impex | Aqualac AYD-804 is a light yellow functional epoxy resin with low toxicity, characterized by higher softening point with wide molecule weight distribution. It is of high-molecule-weight compound of even polymerization degree. The product of such material ...展开 Aqualac AYD-804 is a light yellow functional epoxy resin with low toxicity, characterized by higher softening point with wide molecule weight distribution. It is of high-molecule-weight compound of even polymerization degree. The product of such material has stronger impact resistance and flexibility. It is mainly used in coating and painting business. Aqualac AYD-804 has and epoxy equivalent of 900~1000 (g/eq) and softening point of 96~107 (℃). 收起 | |
| Aqualac AYDPG- 660 | Aquent Impex | Aqualac AYDPG- 660 is a nonpoisonous, non-harmful epoxy resin. It is suitable for adhesives, casting, coatings, and non-solvent paints. It has an epoxy equivalent of 140-200 (g/eq). | |
| Aqualac AYDPG- 669 | Aquent Impex | Aqualac AYDPG- 669 is a nonpoisonous, non-harmful epoxy resin. It is suitable for adhesives, casting, coatings, and non-solvent paints. It has an epoxy equivalent of 125-143 (g/eq). | |
| Aqualac AYDPG-300 | Aquent Impex | Aqualac AYDPG-300 is a nonpoisonous, non-harmful epoxy resin. It is suitable for adhesives, casting, coatings, and non-solvent paints. It has an epoxy equivalent of 285-310 (g/eq). | |
| Aqualac AYDW-112W50 | Aquent Impex | Aqualac AYDW-112W50 is a waterborne Epoxy resin that has wonderful prospect of application due to its properties. Especially in terms of the application of this epoxy resin in combination with cement mortar, the introduction of hydrophilic groups into epo...展开 Aqualac AYDW-112W50 is a waterborne Epoxy resin that has wonderful prospect of application due to its properties. Especially in terms of the application of this epoxy resin in combination with cement mortar, the introduction of hydrophilic groups into epoxy makes this high performance organic & inorganic compound available with the high performance epoxy resin as a precondition. The outstanding advantage of waterborne epoxy resin lies on that this compound can be cured at atmospheric temperature & humidity with reasonable curing time. It can be mixed with such common cement-based material as cement mortar & concrete to enhance the early strength, tenacity, impact resistance & waterproof ability of above materials with very high cross-linking density. Applications include environmentally friendly, paint, car coatings, and cement floors. 收起 | |
| Aqualac AYDW-113W50 | Aquent Impex | Aqualac AYDW-112W50 is a waterborne Epoxy resin that has wonderful prospect of application due to its properties. Especially in terms of the application of this epoxy resin in combination with cement mortar, the introduction of hydrophilic groups into epo...展开 Aqualac AYDW-112W50 is a waterborne Epoxy resin that has wonderful prospect of application due to its properties. Especially in terms of the application of this epoxy resin in combination with cement mortar, the introduction of hydrophilic groups into epoxy makes this high performance organic & inorganic compound available with the high performance epoxy resin as a precondition. The outstanding advantage of waterborne epoxy resin lies on that this compound can be cured at atmospheric temperature & humidity with reasonable curing time. It can be mixed with such common cement-based material as cement mortar & concrete to enhance the early strength, tenacity, impact resistance & waterproof ability of above materials with very high cross-linking density. Applications include environmentally friendly, paint, car coatings, and cement floors. 收起 | |
| Aromatic C9 Hydrocarbon Resin Aquatac I100 | Aquent Impex | Aromatic C9 Hydrocarbon Resin Aquatac I100 is a tackifier resin which provides tack and adherence to varied surfaces and also influence through low color, odorless, and stable product. As a tackifier, it offers high thermal stability, light color, polymer...展开 Aromatic C9 Hydrocarbon Resin Aquatac I100 is a tackifier resin which provides tack and adherence to varied surfaces and also influence through low color, odorless, and stable product. As a tackifier, it offers high thermal stability, light color, polymer compatibility, and low odor. Aromatic C9 Hydrocarbon Resin Aquatac I100 has an Gardner colour value of 3-4. 收起 | |
| Aromatic C9 Hydrocarbon Resin Aquatac I120S | Aquent Impex | Aromatic C9 Hydrocarbon Resin Aquatac I120S is a tackifier resin which provides tack and adherence to varied surfaces and also influence through low color, odorless, and stable product. As a tackifier, it offers high thermal stability, light color, polyme...展开 Aromatic C9 Hydrocarbon Resin Aquatac I120S is a tackifier resin which provides tack and adherence to varied surfaces and also influence through low color, odorless, and stable product. As a tackifier, it offers high thermal stability, light color, polymer compatibility, and low odor. Aromatic C9 Hydrocarbon Resin Aquatac I120S has an Gardner colour value of 4-5. 收起 | |
| Aromatic C9 Hydrocarbon Resin Aquatac I140 | Aquent Impex | Aromatic C9 Hydrocarbon Resin Aquatac I140 is a tackifier resin which provides tack and adherence to varied surfaces and also influence through low color, odorless, and stable product. As a tackifier, it offers high thermal stability, light color, polymer...展开 Aromatic C9 Hydrocarbon Resin Aquatac I140 is a tackifier resin which provides tack and adherence to varied surfaces and also influence through low color, odorless, and stable product. As a tackifier, it offers high thermal stability, light color, polymer compatibility, and low odor. Aromatic C9 Hydrocarbon Resin Aquatac I140 has an Gardner colour value of 5-6. 收起 | |
| BURGESS 2211 | Burgess Pigment Company | BURGESS 2211 is a surface modified calcined aluminum silicate that has low warpage and high impact strength. This product is often used in urethane and polyester applications, and can also be used as an extender or filler in paints, coatings, adhesives, a...展开 BURGESS 2211 is a surface modified calcined aluminum silicate that has low warpage and high impact strength. This product is often used in urethane and polyester applications, and can also be used as an extender or filler in paints, coatings, adhesives, and sealants. 收起 | |
| BURGESS 30P® | Burgess Pigment Company | BURGESS 30P® is a flash calcined median particle size clay used extensively in PVC compounds for improving electricals. This product exhibits low specific gravity and excellent color, and can be used as an extender or filler in paints, coatings, adhesives...展开 BURGESS 30P® is a flash calcined median particle size clay used extensively in PVC compounds for improving electricals. This product exhibits low specific gravity and excellent color, and can be used as an extender or filler in paints, coatings, adhesives, and sealants. 收起 | |
| BURGESS 5178 | Burgess Pigment Company | BURGESS 5178 is hydrophobic and a chemical bond between the calcined clay and the polymer exists. This product has been designed to provide excellent wet and dry electrical properties through a proprietary surface treatment. It is often used as an extende...展开 BURGESS 5178 is hydrophobic and a chemical bond between the calcined clay and the polymer exists. This product has been designed to provide excellent wet and dry electrical properties through a proprietary surface treatment. It is often used as an extender or filler in paints, coatings, adhesives, and sealants. 收起 | |
| BURGESS CB | Burgess Pigment Company | BURGESS CB is a surface modified calcined aluminum silicate that has been designed for use in crosslinked polyethylene and polyester. This product can be used as an extender or filler in paints, coatings, adhesives, and sealants. | |
| BURGESS ICEBERG® | Burgess Pigment Company | BURGESS ICEBERG® is a conventionally calcined median particle size, 91-93 GE brightness clay used as an extender of TiO2. It is used in trade sales interior/exterior flat paints and as a filler in polyurethane sealants. This product can provide better opa...展开 BURGESS ICEBERG® is a conventionally calcined median particle size, 91-93 GE brightness clay used as an extender of TiO2. It is used in trade sales interior/exterior flat paints and as a filler in polyurethane sealants. This product can provide better opacity, higher degree of whiteness, better tint strength, easy dispersion, and low moisture levels in moisture sensitive applications. 收起 | |
| BURGESS ICECAP K® | Burgess Pigment Company | BURGESS ICECAP K® is an excellent extender for TiO2 in coatings where a high hegman grind is required. It has good electricals, low compression set, and low water absorption. This product can be used as an extender or filler in paints, coatings, adhesives...展开 BURGESS ICECAP K® is an excellent extender for TiO2 in coatings where a high hegman grind is required. It has good electricals, low compression set, and low water absorption. This product can be used as an extender or filler in paints, coatings, adhesives, and sealants. 收起 | |
| BURGESS ICECAP KSF | Burgess Pigment Company | BURGESS ICECAP KSF is a medium particle size anhydrous (calcined) kaolin clay that is used extensively as a “mild abrasive agent” in various polish applications. This product is a very finely ground dry white powder that exhibits dispersion and extremely ...展开 BURGESS ICECAP KSF is a medium particle size anhydrous (calcined) kaolin clay that is used extensively as a “mild abrasive agent” in various polish applications. This product is a very finely ground dry white powder that exhibits dispersion and extremely low 325 (45 micron) mesh residue. 收起 | |
| BURGESS KE | Burgess Pigment Company | BURGESS KE is an uniquely processed silane modified anhydrous aluminum silicate designed for use in crosslinked polyethylene and polyester systems. This product is a very pure, high brightness, low residue, calcined kaolin that can be used as an extender ...展开 BURGESS KE is an uniquely processed silane modified anhydrous aluminum silicate designed for use in crosslinked polyethylene and polyester systems. This product is a very pure, high brightness, low residue, calcined kaolin that can be used as an extender or filler in paints, coatings, adhesives, and sealants. 收起 | |
| BURGESS NO. 10 | Burgess Pigment Company | BURGESS NO. 10 is a fine particle size, medium brightness hydrous kaolin clay. This product exhibits dispersion in water based, acid pH, alkyd, or solvent based coatings and inks, electrodeposition body primers, as well as EIFS. | |
| BURGESS NO. 17 | Burgess Pigment Company | BURGESS NO. 17 is a fine particle size, high brightness hydrous kaolin clay used to extend TiO2 in semigloss paints and inks. This product is well ground, has excellent whiteness and dispersion, and high brightness. | |
| BURGESS NO. 20 | Burgess Pigment Company | BURGESS NO. 20 is a fine particle size, medium brightness hydrous kaolin clay. This product is used in jacketing layer of wire and cable insulation compounds, rubber roll covers, polishing compounds and concrete curing compounds. It can also be used as an...展开 BURGESS NO. 20 is a fine particle size, medium brightness hydrous kaolin clay. This product is used in jacketing layer of wire and cable insulation compounds, rubber roll covers, polishing compounds and concrete curing compounds. It can also be used as an extender or filler in paints, coatings, adhesives, and sealants. 收起 | |
| BURGESS NO. 27 | Burgess Pigment Company | BURGESS NO. 27 is an ultra fine particle size, medium brightness hydrous kaolin clay. This product is used as an extender in semigloss, satin, and gloss paints. | |
| BURGESS NO. 28 | Burgess Pigment Company | BURGESS NO. 28 is an ultra fine particle size, higher brightness hydrous kaolin clay. This product is used to extend TiO2 while maintaining tint strength and gloss. It is used extensively in water based satin and semigloss coating systems. | |
| BURGESS NO. 30® | Burgess Pigment Company | BURGESS NO. 30® is a partially calcined clay used extensively in PVC compounds to improve insulation resistance. This product exhibits excellent dispersion and color uniformity, and can be used as an extender or filler in paints, coatings, adhesives, and ...展开 BURGESS NO. 30® is a partially calcined clay used extensively in PVC compounds to improve insulation resistance. This product exhibits excellent dispersion and color uniformity, and can be used as an extender or filler in paints, coatings, adhesives, and sealants. 收起 | |
| BURGESS NO. 40 | Burgess Pigment Company | BURGESS NO. 40 is a median particle size, medium brightness hydrous kaolin clay. This product is an acid pH clay exhibiting excellent dispersion properties, and can be used in trade sales coatings and adhesives. | |
| BURGESS NO. 50® | Burgess Pigment Company | BURGESS NO. 50® is a high brightness, fine particle size calcined kaolin that is an extender of TiO2 in coatings or polymeric systems. This product facilitates reduction of prime pigment while maintaining opacity, whiteness, and tint strength of coatings ...展开 BURGESS NO. 50® is a high brightness, fine particle size calcined kaolin that is an extender of TiO2 in coatings or polymeric systems. This product facilitates reduction of prime pigment while maintaining opacity, whiteness, and tint strength of coatings and retention of physical properties in filled polymeric systems. 收起 | |
| BURGESS NO. 60 | Burgess Pigment Company | BURGESS NO. 60 is an acid pH, fine particle size, medium brightness hydrous kaolin clay with excellent dispersion properties. This product is used in inks, adhesives and industrial finishes, electrostatic deposition body primers, and EIFS. | |
| BURGESS NO. 97 | Burgess Pigment Company | BURGESS NO. 97 is an ultra fine particle size, medium brightness hydrous kaolin clay that exhibits excellent tint strength. This product is a well-ground extender of TiO2 in semigloss, satin, and gloss paints. | |
| BURGESS NO. 98 | Burgess Pigment Company | BURGESS NO. 98 is an ultra fine particle size, higher brightness hydrous kaolin clay that exhibits excellent tint strength and dispersion. This product is a well ground, premium extender of TiO2 in water based, solvent or alkyd semigloss, satin, and gloss...展开 BURGESS NO. 98 is an ultra fine particle size, higher brightness hydrous kaolin clay that exhibits excellent tint strength and dispersion. This product is a well ground, premium extender of TiO2 in water based, solvent or alkyd semigloss, satin, and gloss paints. 收起 | |
| BURGESS OPTIPOZZ® | Burgess Pigment Company | BURGESS OPTIPOZZ® is a high reactivity metakaolin produced by a patented process. This product increases chemical resistance and durability, and reduces shrinkage. It can be used as an extender or filler in paints, coatings, adhesives, and sealants. | |
| BURGESS OPTIWHITE® | Burgess Pigment Company | BURGESS OPTIWHITE® is a premium whiteness flash calcined extender for TiO2 exhibiting GE brightness used extensively in First Line interior/exterior flat or low sheen water based and alkyd paint systems. This product exhibits excellent whiteness retention...展开 BURGESS OPTIWHITE® is a premium whiteness flash calcined extender for TiO2 exhibiting GE brightness used extensively in First Line interior/exterior flat or low sheen water based and alkyd paint systems. This product exhibits excellent whiteness retention and hiding when embedded in coatings and polymers. It can provide excellent dispersion, high hiding, and improved film properties. 收起 | |
| BURGESS OPTIWHITE MX® | Burgess Pigment Company | BURGESS OPTIWHITE MX® is a flash calcined clay exhibiting GE Brightness and extension of TiO2, whiteness, touchup, and tint strength. This product is used extensively in flat or low sheen interior/exterior trade sales water-based, alkyd, or solvent-based ...展开 BURGESS OPTIWHITE MX® is a flash calcined clay exhibiting GE Brightness and extension of TiO2, whiteness, touchup, and tint strength. This product is used extensively in flat or low sheen interior/exterior trade sales water-based, alkyd, or solvent-based coatings by reducing the amount of TiO2 and lowering raw material costs while maintaining opacity, whiteness, and tint strength. 收起 | |
| BURGESS OPTIWHITE P® | Burgess Pigment Company | BURGESS OPTIWHITE P® is a flash calcined clay used extensively to extend TiO2. This product exhibits GE Brightness, improves touchup, scrub, and burnish resistance. It is used in flat interior trade sales paints which do not require maximum whiteness. | |
| BURGESS POLYCLAY | Burgess Pigment Company | BURGESS POLYCLAY is a fine particle size, medium brightness hydrous kaolin clay used in inks. | |
| BURGESS THERMOGLACE H | Burgess Pigment Company | BURGESS THERMOGLACE H is a delaminated, fine particle size, medium brightness hydrous kaolin clay. This product is used in primers and trade sales coatings for the reduction of mud-cracking (micro-cracking due to film stress) and reduction of permeability...展开 BURGESS THERMOGLACE H is a delaminated, fine particle size, medium brightness hydrous kaolin clay. This product is used in primers and trade sales coatings for the reduction of mud-cracking (micro-cracking due to film stress) and reduction of permeability. 收起 | |
| C9 Resin | Yangzhou Sunchem Co., Ltd. | C9 Resin is a light yellow granular synthetic resin that has a pH value of 6-8 and an acid value of 0.5 mgKOH/g maximum. This product is used as a raw material for adhesives, sealants, coatings, and printing inks. | |
| Cinilex® DPP Orange SJ1C | CINIC Chemicals (Shanghai) Co., Ltd. | Cinilex® DPP Orange SJ1C is a highly opaque, high color strength, and saturated orange pigment. This product can provide high opacity, better flow, longer drying times, and high color strength. It is most commonly used in decorative, industrial, and selec...展开 Cinilex® DPP Orange SJ1C is a highly opaque, high color strength, and saturated orange pigment. This product can provide high opacity, better flow, longer drying times, and high color strength. It is most commonly used in decorative, industrial, and selected powder coating applications. 收起 | |
| Cinilex® DPP Red SR1C | CINIC Chemicals (Shanghai) Co., Ltd. | Cinilex® DPP Red SR1C is an opaque and highly weather resistant mid shade red organic pigment. This product can provide good chemical and solvent resistance and improve weather stability. It is most commonly used in architectural powder coating, coil coat...展开 Cinilex® DPP Red SR1C is an opaque and highly weather resistant mid shade red organic pigment. This product can provide good chemical and solvent resistance and improve weather stability. It is most commonly used in architectural powder coating, coil coating, baking paints, water-based paints, and industrial coating applications. 收起 | |
| Cinilex® DPP Red SR2P | CINIC Chemicals (Shanghai) Co., Ltd. | Cinilex® DPP Red SR2P is a high strength, highly resistant mid shade red organic pigment. This product can improve overpainting resistance and heat stability of the coatings. It is most commonly used in water based decorative coatings, powder coatings, an...展开 Cinilex® DPP Red SR2P is a high strength, highly resistant mid shade red organic pigment. This product can improve overpainting resistance and heat stability of the coatings. It is most commonly used in water based decorative coatings, powder coatings, and industrial coating applications. 收起 | |
| Cinilex® DPP Red ST | CINIC Chemicals (Shanghai) Co., Ltd. | Cinilex® DPP Red ST is an extremely transparent and saturated, high strength DPP based mid shade red organic pigment. This product can be used in conjunction with mica and aluminium pigments. It is most commonly used in car refinish applications, baking p...展开 Cinilex® DPP Red ST is an extremely transparent and saturated, high strength DPP based mid shade red organic pigment. This product can be used in conjunction with mica and aluminium pigments. It is most commonly used in car refinish applications, baking paints, nitrocellulose paints, and water-based paints. 收起 | |
| Cinilex® DPP Rubine SR5H | CINIC Chemicals (Shanghai) Co., Ltd. | Cinilex® DPP Rubine SR5H is a highly opaque, bluish red pigment. This product can provide outstanding light, weather, heat, overpainting and solvent resistance. It is most commonly used in baking paints, acid cured paints, water based paints, and coating ...展开 Cinilex® DPP Rubine SR5H is a highly opaque, bluish red pigment. This product can provide outstanding light, weather, heat, overpainting and solvent resistance. It is most commonly used in baking paints, acid cured paints, water based paints, and coating applications. 收起 | |
| Cinilex® DPP Rubine SR6T | CINIC Chemicals (Shanghai) Co., Ltd. | Cinilex® DPP Rubine SR6T is a transparent and saturated, highly weather resistant, DPP based blue shade red organic pigment. This product can be used in conjunction with mica and aluminium pigments. It is most commonly used in automotive OEM, car refinish...展开 Cinilex® DPP Rubine SR6T is a transparent and saturated, highly weather resistant, DPP based blue shade red organic pigment. This product can be used in conjunction with mica and aluminium pigments. It is most commonly used in automotive OEM, car refinish and commercial transportation applications. 收起 | |
| Cinilex® Red SR3C | CINIC Chemicals (Shanghai) Co., Ltd. | Cinilex® Red SR3C is a highly transparent, bluish red pigment. This product is most commonly used in automotive OEM, car refinish, and powder coating applications. | |
| Cinilex® Red SR4C | CINIC Chemicals (Shanghai) Co., Ltd. | Cinilex® Red SR4C is a highly transparent blush red pigment. This product can be used in conjunction with pearlescent and mica pigments. It is most commonly used in industrial coating and motorcycle paint applications. | |
| Cinilex® Yellow SY1H | CINIC Chemicals (Shanghai) Co., Ltd. | Cinilex® Yellow SY1H is a weather resistant, high performance, red shade organic yellow pigment. This product maintains its outstanding performance in highly reduced shades with titanium dioxide or other inorganic pigments. It is most commonly used in ind...展开 Cinilex® Yellow SY1H is a weather resistant, high performance, red shade organic yellow pigment. This product maintains its outstanding performance in highly reduced shades with titanium dioxide or other inorganic pigments. It is most commonly used in industrial, powder, decorative, automotive, and coil coating applications. 收起 | |
| Cinilex® Yellow SY2T | CINIC Chemicals (Shanghai) Co., Ltd. | Cinilex® Yellow SY2T is a transparent, weather resistant, isoindolinone based red shade yellow organic pigment. This product can be used in conjunction with mica and aluminium pigments. It is most commonly used in automotive OEM and car refinish applicati...展开 Cinilex® Yellow SY2T is a transparent, weather resistant, isoindolinone based red shade yellow organic pigment. This product can be used in conjunction with mica and aluminium pigments. It is most commonly used in automotive OEM and car refinish applications. 收起 | |
| Epotec® RD 103 | Aditya Birla | Epotec® RD 103 is a low viscosity, aliphatic di-epoxide compound based on 1,4-butane diol. It is a reactive diluent for high viscosity epoxy resins. This product is well suited for use in structural adhesives and coatings for filament winding, lamination,...展开 Epotec® RD 103 is a low viscosity, aliphatic di-epoxide compound based on 1,4-butane diol. It is a reactive diluent for high viscosity epoxy resins. This product is well suited for use in structural adhesives and coatings for filament winding, lamination, electronic encapsulation, and other industrial applications. 收起 | |
| Epotec® RD 104 | Aditya Birla | Epotec® RD 104 is a mono-functional, phenol-based glycidyl ether, primarily used for reducing the viscosity of conventional epoxy resins. This product is ideal for use in adhesives and casting, flooring, and construction applications. | |
| Epotec® RD 105 | Aditya Birla | Epotec® RD 105 is a mono-functional, o-Cresol-based reactive diluent primarily used for reducing the viscosity of conventional epoxy resins. It features excellent retention of mechanical and chemical resistance properties, with no influence on reactivity....展开 Epotec® RD 105 is a mono-functional, o-Cresol-based reactive diluent primarily used for reducing the viscosity of conventional epoxy resins. It features excellent retention of mechanical and chemical resistance properties, with no influence on reactivity. This product is ideal for use in adhesives and flooring, casting, & construction coatings. 收起 | |
| Epotec® RD 106 | Aditya Birla | Epotec® RD 106 is an aromatic, mono-functional, p-tertiary butyl phenol-based reactive diluent. It features a combination of good electrical properties, low viscosity, low volatility, and low odor level. This product is ideal for use in coatings, adhesive...展开 Epotec® RD 106 is an aromatic, mono-functional, p-tertiary butyl phenol-based reactive diluent. It features a combination of good electrical properties, low viscosity, low volatility, and low odor level. This product is ideal for use in coatings, adhesives, laminates, and flooring applications. 收起 | |
| Epotec® RD 107 | Aditya Birla | Epotec® RD 107 is a low viscosity, aliphatic di-epoxide compound based on 1,6-hexanediol, designed for use as a reactive diluent for high viscosity epoxy resins. It helps to improve toughness and retain chemical resistance in final formulations. This prod...展开 Epotec® RD 107 is a low viscosity, aliphatic di-epoxide compound based on 1,6-hexanediol, designed for use as a reactive diluent for high viscosity epoxy resins. It helps to improve toughness and retain chemical resistance in final formulations. This product is ideal for use in structural adhesives, coatings, and filament winding, lamination, & electronic encapsulation applications. 收起 | |
| Epotec® RD 108 | Aditya Birla | Epotec® RD 108 is a mono-glycidyl ether of C12-C14 fatty alcohol, primarily used as a reactive diluent for high viscosity epoxy resins. It features improved non-yellowing characteristics, excellent wetting properties, and low odor. This product is ideal f...展开 Epotec® RD 108 is a mono-glycidyl ether of C12-C14 fatty alcohol, primarily used as a reactive diluent for high viscosity epoxy resins. It features improved non-yellowing characteristics, excellent wetting properties, and low odor. This product is ideal for use in self-leveling flooring & screed applications, metal and concrete primers & coatings, and general purpose adhesives. 收起 | |
| Epotec® RD 109 | Aditya Birla | Epotec® RD 109 is a mono-glycidyl ether of C12-C13 fatty alcohol, primarily used as a reactive diluent for high viscosity epoxy resins. This product is ideal for use in self-leveling flooring applications, general purpose coatings, and general purpose adh...展开 Epotec® RD 109 is a mono-glycidyl ether of C12-C13 fatty alcohol, primarily used as a reactive diluent for high viscosity epoxy resins. This product is ideal for use in self-leveling flooring applications, general purpose coatings, and general purpose adhesives. 收起 | |
| Epotec® RD 110 | Aditya Birla | Epotec® RD 110 is a mono-glycidyl ether of 2-ethyl hexanol, primarily used as a reactive diluent for high viscosity epoxy resins. It features very low viscosity and exceptional dilution efficiency. This product is ideal for use in flooring applications, c...展开 Epotec® RD 110 is a mono-glycidyl ether of 2-ethyl hexanol, primarily used as a reactive diluent for high viscosity epoxy resins. It features very low viscosity and exceptional dilution efficiency. This product is ideal for use in flooring applications, coatings, and general purpose adhesives. 收起 | |
| Epotec® RD 111 | Aditya Birla | Epotec® RD 111 is a low viscosity, cyclo-aliphatic, di-functional epoxy reactive diluent based on cyclohexane dimethanol. It is designed primarily for use with high viscosity epoxy resins and offers improved UV resistance. This product is ideal for use in...展开 Epotec® RD 111 is a low viscosity, cyclo-aliphatic, di-functional epoxy reactive diluent based on cyclohexane dimethanol. It is designed primarily for use with high viscosity epoxy resins and offers improved UV resistance. This product is ideal for use in coatings, civil applications, and electronic encapsulation. 收起 | |
| Epotec® RD 113 | Aditya Birla | Epotec® RD 113 is a low viscosity, trifunctional epoxy reactive diluent based on trimethylol propane. It features good cross-link density, which helps improve chemical resistance in formulations based on conventional BPA epoxy resins. This product is idea...展开 Epotec® RD 113 is a low viscosity, trifunctional epoxy reactive diluent based on trimethylol propane. It features good cross-link density, which helps improve chemical resistance in formulations based on conventional BPA epoxy resins. This product is ideal for chemical resistant coatings, fast setting adhesives & sealants, tank linings, abrasion resistant castings, and encapsulation & other electronic applications. 收起 | |
| Epotec® RD 114LE | Aditya Birla | Epotec® RD 114LE is a diglycidyl ether of neopentyl glycol, designed primarily as a reactive diluent for high viscosity epoxy resins. This product is ideal for use in coatings and adhesives. | |
| Epotec® RD 119LE | Aditya Birla | Epotec® RD 119LE is a diglycidyl ether of polypropylene glycol which, when blended with conventional epoxy resins, improves flexibility, increases elongation, improves impact resistance, and reduces viscosity. This product is ideal for use in automotive c...展开 Epotec® RD 119LE is a diglycidyl ether of polypropylene glycol which, when blended with conventional epoxy resins, improves flexibility, increases elongation, improves impact resistance, and reduces viscosity. This product is ideal for use in automotive coatings & adhesives, tank linings, coil coatings, and flooring applications. 收起 | |
| Epotec® RD 121 | Aditya Birla | Epotec® RD 121 is a low color di-epoxide, based on dipropylene glycol, which improves flexibility and impact strength and increases elongation in cured systems. This product is ideal for use in adhesives and protective and marine coatings. | |
| Epotec® TH 7201 | Aditya Birla | Epotec® TH 7201 is a low viscosity, modified polyamine curing agent designed for use with liquid epoxy resins. It contributes to high chemical resistance - including outstanding resistance to strong oxidizing acids, many bases, chlorinated hydrocarbons, a...展开 Epotec® TH 7201 is a low viscosity, modified polyamine curing agent designed for use with liquid epoxy resins. It contributes to high chemical resistance - including outstanding resistance to strong oxidizing acids, many bases, chlorinated hydrocarbons, and methanol-gasoline mixtures. This product is ideal for use in chemical resistant flooring applications, chemical resistant coatings & linings, and solvent-free coatings. 收起 | |
| Epotec® TH 7202 | Aditya Birla | Epotec® TH 7202 is a low viscosity, modified polyamine curing agent designed for use with liquid epoxy resins. Highly reactive and fast setting, it features good chemical resistance and can be used alone or as an accelerator for other curing agents. This ...展开 Epotec® TH 7202 is a low viscosity, modified polyamine curing agent designed for use with liquid epoxy resins. Highly reactive and fast setting, it features good chemical resistance and can be used alone or as an accelerator for other curing agents. This product is ideal for use in fast setting adhesives and gel coats. 收起 | |
| Epotec® TH 7203 | Aditya Birla | Epotec® TH 7203 is a low viscosity, modified polyamine curing agent designed for use with liquid epoxy resins. It features good reactivity even at low temperatures, develops rapid physical and mechanical properties, and yields surfaces with good chemical ...展开 Epotec® TH 7203 is a low viscosity, modified polyamine curing agent designed for use with liquid epoxy resins. It features good reactivity even at low temperatures, develops rapid physical and mechanical properties, and yields surfaces with good chemical resistance. This product is ideal for use in chemical resistant coatings, secondary containment linings, and industrial protective coatings. 收起 | |
| Epotec® TH 7207 | Aditya Birla | Epotec® TH 7207 is a low viscosity, modified aliphatic polyamine curing agent designed for use with liquid epoxy resins. It features high reactivity even at low temperatures, rapid development of physical strength, and good compatibility & accelerator fun...展开 Epotec® TH 7207 is a low viscosity, modified aliphatic polyamine curing agent designed for use with liquid epoxy resins. It features high reactivity even at low temperatures, rapid development of physical strength, and good compatibility & accelerator functionality with other polyamine curing agents. This product is ideal for use in chemical resistant coatings and rapid setting adhesives. 收起 | |
| Epotec® TH 7210 | Aditya Birla | Epotec® TH 7210 is a low viscosity, modified aliphatic polyamine curing agent designed for use with liquid epoxy resins. Highly reactive and fast setting, it yields good chemical resistance and can be used alone or as an accelerator for other curing agent...展开 Epotec® TH 7210 is a low viscosity, modified aliphatic polyamine curing agent designed for use with liquid epoxy resins. Highly reactive and fast setting, it yields good chemical resistance and can be used alone or as an accelerator for other curing agents. This product is ideal for use in solvent-free coatings and fast setting adhesives. 收起 | |
| Epotec® TH 7211 | Aditya Birla | Epotec® TH 7211 is a low viscosity, modified aliphatic polyamine curing agent designed for use with liquid epoxy resins. It yields systems with long working times, excellent resistance to carbonation, and outstanding gloss, clarity, & toughness. This prod...展开 Epotec® TH 7211 is a low viscosity, modified aliphatic polyamine curing agent designed for use with liquid epoxy resins. It yields systems with long working times, excellent resistance to carbonation, and outstanding gloss, clarity, & toughness. This product is ideal for use in high solids & solvent-free coatings, adhesives, and floor toppings. 收起 | |
| Epotec® TH 7212 | Aditya Birla | Epotec® TH 7212 is a very low viscosity, modified aliphatic amine curing agent featuring good impact resistance, high reactivity, and good penetration in smaller cracks. This product is ideal for use in crack injection systems, adhesives, castings, and hi...展开 Epotec® TH 7212 is a very low viscosity, modified aliphatic amine curing agent featuring good impact resistance, high reactivity, and good penetration in smaller cracks. This product is ideal for use in crack injection systems, adhesives, castings, and high solids, low VOC, & solvent-free coatings. 收起 | |
| Epotec® TH 7301 | Aditya Birla | Epotec® TH 7301 is a low viscosity, low color, modified cycloaliphatic polyamine curing agent designed for use with liquid epoxy resins. It provides resistance to acids, alkalies, hydrocarbons, and water. This product is ideal for use in solvent-free, hig...展开 Epotec® TH 7301 is a low viscosity, low color, modified cycloaliphatic polyamine curing agent designed for use with liquid epoxy resins. It provides resistance to acids, alkalies, hydrocarbons, and water. This product is ideal for use in solvent-free, high solid coatings, self-leveling flooring applications, primers & screeds, transparent coatings, and chemical resistant linings. 收起 | |
| Epotec® TH 7302 | Aditya Birla | Epotec® TH 7302 is a low viscosity, modified cycloaliphatic polyamine curing agent designed for use with liquid epoxy resins. It provides good resistance to acids, alkalies, hydrocarbons, and water. This product is ideal for use in solvent-free, high soli...展开 Epotec® TH 7302 is a low viscosity, modified cycloaliphatic polyamine curing agent designed for use with liquid epoxy resins. It provides good resistance to acids, alkalies, hydrocarbons, and water. This product is ideal for use in solvent-free, high solids coatings, primers & screeds, chemical resistant linings, and water proofing applications. 收起 | |
| Epotec® TH 7310 | Aditya Birla | Epotec® TH 7310 is a moderate viscosity, low color epoxy curing agent which, when cured with standard epoxy resin, provides surfaces with high gloss and resistance to various chemicals. This product is ideal for use in self-leveling floors & top coats, hi...展开 Epotec® TH 7310 is a moderate viscosity, low color epoxy curing agent which, when cured with standard epoxy resin, provides surfaces with high gloss and resistance to various chemicals. This product is ideal for use in self-leveling floors & top coats, high solids & low VOC coatings, and clear or colored wood lacquers. 收起 | |
| Epotec® TH 7320 | Aditya Birla | Epotec® TH 7320 is a low viscosity, modified cycloaliphatic polyamine curing agent designed for use with liquid epoxy resins. This product is ideal for use in solvent-free, high-filled self-leveling coatings, primers & screeds, transparent coatings, and c...展开 Epotec® TH 7320 is a low viscosity, modified cycloaliphatic polyamine curing agent designed for use with liquid epoxy resins. This product is ideal for use in solvent-free, high-filled self-leveling coatings, primers & screeds, transparent coatings, and chemical resistant linings. 收起 | |
| Epotec® TH 7901 | Aditya Birla | Epotec® TH 7901 is a low viscosity, modified, cycloaliphatic polyamine-based mannich base curing agent for use with liquid epoxy resins. It is capable of curing in high humidity and low temperature conditions. This product is ideal for use in chemical res...展开 Epotec® TH 7901 is a low viscosity, modified, cycloaliphatic polyamine-based mannich base curing agent for use with liquid epoxy resins. It is capable of curing in high humidity and low temperature conditions. This product is ideal for use in chemical resistant high solids coatings, chemical resistant flooring coatings, and self-leveling floor toppings. 收起 | |
| Epotec® TH 7902 | Aditya Birla | Epotec® TH 7902 is a a low viscosity, modified, phenol-free, cycloaliphatic polyamine-based mannich base curing agent designed for use with liquid epoxy resins. It is capable of curing in high humidity and low temperature conditions. This product is ideal...展开 Epotec® TH 7902 is a a low viscosity, modified, phenol-free, cycloaliphatic polyamine-based mannich base curing agent designed for use with liquid epoxy resins. It is capable of curing in high humidity and low temperature conditions. This product is ideal for use in chemical resistant high solids coatings, chemical resistant flooring coatings, and concrete primers & repair compounds. 收起 | |
| Epotec® TH 7903 | Aditya Birla | Epotec® TH 7903 is a low viscosity, modified, aliphatic polyamine-based mannich base curing agent designed for use with liquid epoxy resins. It is capable of curing in high humidity and low temperature conditions, as well as on damp surfaces. This product...展开 Epotec® TH 7903 is a low viscosity, modified, aliphatic polyamine-based mannich base curing agent designed for use with liquid epoxy resins. It is capable of curing in high humidity and low temperature conditions, as well as on damp surfaces. This product is ideal for use in chemical resistant coatings, adhesives, and concrete bonding compounds. 收起 | |
| Epotec® TH 7905 | Aditya Birla | Epotec® TH 7905 is a low viscosity, modified, aliphatic polyamine-based mannich base curing agent designed for use with liquid epoxy resins. It is capable of curing in high humidity and low temperature conditions, as well as on damp surfaces. This product...展开 Epotec® TH 7905 is a low viscosity, modified, aliphatic polyamine-based mannich base curing agent designed for use with liquid epoxy resins. It is capable of curing in high humidity and low temperature conditions, as well as on damp surfaces. This product is ideal for use in chemical resistant coatings, adhesives, and concrete bonding compounds. 收起 | |
| Epotec® TH 7940 | Aditya Birla | Epotec® TH 7940 is a phenalkamine curing agent designed for fast curing. Capable of curing at low temperatures and under high humidity conditions, it is also compatible with unmodified, modified, and solvent-based epoxy resins. This product is ideal for u...展开 Epotec® TH 7940 is a phenalkamine curing agent designed for fast curing. Capable of curing at low temperatures and under high humidity conditions, it is also compatible with unmodified, modified, and solvent-based epoxy resins. This product is ideal for use in solvent-based & high solids coatings, concrete floor coatings, pipe & tank linings, and anti-corrosive maintenance coatings. 收起 | |
| Epotec® TH 7940NB | Aditya Birla | Epotec® TH 7940NB is a phenalkamine curing agent in solvent, designed for a fast cure. It can be used with unmodified, modified, and solvent-based epoxy resins. This product is ideal for use in solvent-based and high solids coatings, pipe and tank linings...展开 Epotec® TH 7940NB is a phenalkamine curing agent in solvent, designed for a fast cure. It can be used with unmodified, modified, and solvent-based epoxy resins. This product is ideal for use in solvent-based and high solids coatings, pipe and tank linings, concrete floor coatings, and anti-corrosive maintenance coatings. 收起 | |
| Epotec® TH 7941 | Aditya Birla | Epotec® TH 7941 is a phenalkamine curing agent designed to cure even at low temperatures and in high humidity conditions. It is compatible with unmodified, modified, and solvent-based epoxy resins. This product is ideal for use in medium-to-high solids co...展开 Epotec® TH 7941 is a phenalkamine curing agent designed to cure even at low temperatures and in high humidity conditions. It is compatible with unmodified, modified, and solvent-based epoxy resins. This product is ideal for use in medium-to-high solids coatings, pipe & tank linings, and industrial, marine, & pipe coatings. 收起 | |
| Epotec® TH 7941S10 | Aditya Birla | Epotec® TH 7941S10 is a phenalkamine curing agent designed to cure even at low temperatures and in high humidity conditions. It is compatible with unmodified, modified, and solvent-based epoxy resins. This product is ideal for use in medium-to-high solids...展开 Epotec® TH 7941S10 is a phenalkamine curing agent designed to cure even at low temperatures and in high humidity conditions. It is compatible with unmodified, modified, and solvent-based epoxy resins. This product is ideal for use in medium-to-high solids coatings, pipe & tank linings, and industrial maintenance, marine, & pipe coatings. 收起 | |
| Epotec® TH 7942 | Aditya Birla | Epotec® TH 7942 is a phenalkamine curing agent in solvent, designed to cure even at low temperatures and in high humidity conditions. It is compatible with unmodified, modified, and solvent-based epoxy resins. This product is ideal for use in solvent-base...展开 Epotec® TH 7942 is a phenalkamine curing agent in solvent, designed to cure even at low temperatures and in high humidity conditions. It is compatible with unmodified, modified, and solvent-based epoxy resins. This product is ideal for use in solvent-based & high solids coatings, concrete floor coatings, pipe & tank linings, and anti-corrosive maintenance coatings. 收起 | |
| Epotec® TH 7966 | Aditya Birla | Epotec® TH 7966 is a phenalkamine curing agent designed to cure even at low temperatures and in high humidity conditions. It is compatible with unmodified, modified, and solvent-based epoxy resins. This product is ideal for use in medium-to-high solids co...展开 Epotec® TH 7966 is a phenalkamine curing agent designed to cure even at low temperatures and in high humidity conditions. It is compatible with unmodified, modified, and solvent-based epoxy resins. This product is ideal for use in medium-to-high solids coatings, pipe & tank linings, and industrial maintenance, marine, & pipe coatings. 收起 | |
| Epotec® TH 981 | Aditya Birla | Epotec® TH 981 is a solid phenolic hardener based on epoxy resin and bisphenol-A. This product is ideal for use in both decorative and functional powder coatings. | |
| Epotec® TH 982 | Aditya Birla | Epotec® TH 982 is a solid phenolic hardener based on epoxy resin and bisphenol-A, with an added curing accelerator. This product is ideal for use in both decorative and functional powder coatings. | |
| Epotec® TH 983 | Aditya Birla | Epotec® TH 983 is a solid phenolic hardener based on epoxy resin and bisphenol-A, with an added curing accelerator and flow modifier. This product is ideal for use in both decorative and protective powder coatings. | |
| Epotec® THW 4501 | Aditya Birla | Epotec® THW 4501 is a water-reducible, water-based, solvent-free epoxy curing agent. It features a low gloss finish and the ability to cure in thick coating applications as well as in damp and humid conditions. This product is ideal for use in self-leveli...展开 Epotec® THW 4501 is a water-reducible, water-based, solvent-free epoxy curing agent. It features a low gloss finish and the ability to cure in thick coating applications as well as in damp and humid conditions. This product is ideal for use in self-leveling and trowelable flooring applications. 收起 | |
| Epotec® THW 4502 | Aditya Birla | Epotec® THW 4502 is a water-reducible, water-based, solvent-free epoxy curing agent featuring zero VOC formulation capability, good gloss appearance, and high hardness properties. This product is ideal for use in metal & concrete coatings, primers & seale...展开 Epotec® THW 4502 is a water-reducible, water-based, solvent-free epoxy curing agent featuring zero VOC formulation capability, good gloss appearance, and high hardness properties. This product is ideal for use in metal & concrete coatings, primers & sealers for concrete floors, and general purpose maintenance coatings. 收起 |
