UL Prospector

成功!

成功保存搜索结果
Cinilex® DPP Orange SJ1C CINIC Chemicals (Shanghai) Co., Ltd. Cinilex® DPP Orange SJ1C is a highly opaque, high color strength, and saturated orange pigment. This product can provide high opacity, better flow, longer drying times, and high color strength. It is most commonly used in decorative, industrial, and selec...展开 Cinilex® DPP Orange SJ1C is a highly opaque, high color strength, and saturated orange pigment. This product can provide high opacity, better flow, longer drying times, and high color strength. It is most commonly used in decorative, industrial, and selected powder coating applications. 收起
Cinilex® DPP Red SR1C CINIC Chemicals (Shanghai) Co., Ltd. Cinilex® DPP Red SR1C is an opaque and highly weather resistant mid shade red organic pigment. This product can provide good chemical and solvent resistance and improve weather stability. It is most commonly used in architectural powder coating, coil coat...展开 Cinilex® DPP Red SR1C is an opaque and highly weather resistant mid shade red organic pigment. This product can provide good chemical and solvent resistance and improve weather stability. It is most commonly used in architectural powder coating, coil coating, baking paints, water-based paints, and industrial coating applications. 收起
Cinilex® DPP Red SR2P CINIC Chemicals (Shanghai) Co., Ltd. Cinilex® DPP Red SR2P is a high strength, highly resistant mid shade red organic pigment. This product can improve overpainting resistance and heat stability of the coatings. It is most commonly used in water based decorative coatings, powder coatings, an...展开 Cinilex® DPP Red SR2P is a high strength, highly resistant mid shade red organic pigment. This product can improve overpainting resistance and heat stability of the coatings. It is most commonly used in water based decorative coatings, powder coatings, and industrial coating applications. 收起
Cinilex® DPP Red ST CINIC Chemicals (Shanghai) Co., Ltd. Cinilex® DPP Red ST is an extremely transparent and saturated, high strength DPP based mid shade red organic pigment. This product can be used in conjunction with mica and aluminium pigments. It is most commonly used in car refinish applications, baking p...展开 Cinilex® DPP Red ST is an extremely transparent and saturated, high strength DPP based mid shade red organic pigment. This product can be used in conjunction with mica and aluminium pigments. It is most commonly used in car refinish applications, baking paints, nitrocellulose paints, and water-based paints. 收起
Cinilex® DPP Rubine SR5H CINIC Chemicals (Shanghai) Co., Ltd. Cinilex® DPP Rubine SR5H is a highly opaque, bluish red pigment. This product can provide outstanding light, weather, heat, overpainting and solvent resistance. It is most commonly used in baking paints, acid cured paints, water based paints, and coating ...展开 Cinilex® DPP Rubine SR5H is a highly opaque, bluish red pigment. This product can provide outstanding light, weather, heat, overpainting and solvent resistance. It is most commonly used in baking paints, acid cured paints, water based paints, and coating applications. 收起
Cinilex® DPP Rubine SR6T CINIC Chemicals (Shanghai) Co., Ltd. Cinilex® DPP Rubine SR6T is a transparent and saturated, highly weather resistant, DPP based blue shade red organic pigment. This product can be used in conjunction with mica and aluminium pigments. It is most commonly used in automotive OEM, car refinish...展开 Cinilex® DPP Rubine SR6T is a transparent and saturated, highly weather resistant, DPP based blue shade red organic pigment. This product can be used in conjunction with mica and aluminium pigments. It is most commonly used in automotive OEM, car refinish and commercial transportation applications. 收起
Cinilex® Red SR3C CINIC Chemicals (Shanghai) Co., Ltd. Cinilex® Red SR3C is a highly transparent, bluish red pigment. This product is most commonly used in automotive OEM, car refinish, and powder coating applications.
Cinilex® Red SR4C CINIC Chemicals (Shanghai) Co., Ltd. Cinilex® Red SR4C is a highly transparent blush red pigment. This product can be used in conjunction with pearlescent and mica pigments. It is most commonly used in industrial coating and motorcycle paint applications.
Cinilex® Yellow SY1H CINIC Chemicals (Shanghai) Co., Ltd. Cinilex® Yellow SY1H is a weather resistant, high performance, red shade organic yellow pigment. This product maintains its outstanding performance in highly reduced shades with titanium dioxide or other inorganic pigments. It is most commonly used in ind...展开 Cinilex® Yellow SY1H is a weather resistant, high performance, red shade organic yellow pigment. This product maintains its outstanding performance in highly reduced shades with titanium dioxide or other inorganic pigments. It is most commonly used in industrial, powder, decorative, automotive, and coil coating applications. 收起
Cinilex® Yellow SY2T CINIC Chemicals (Shanghai) Co., Ltd. Cinilex® Yellow SY2T is a transparent, weather resistant, isoindolinone based red shade yellow organic pigment. This product can be used in conjunction with mica and aluminium pigments. It is most commonly used in automotive OEM and car refinish applicati...展开 Cinilex® Yellow SY2T is a transparent, weather resistant, isoindolinone based red shade yellow organic pigment. This product can be used in conjunction with mica and aluminium pigments. It is most commonly used in automotive OEM and car refinish applications. 收起
Epoxy Resin E-10 Anhui Shanfu New Material Technology Co., Ltd. Epoxy Resin E-10 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a light yellow solid granular powder that has good mechanical and anti-corrosive properties. It can be used in paints and powder coatings.
Epoxy Resin E-12 Anhui Shanfu New Material Technology Co., Ltd. Epoxy Resin E-12 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a light yellow, solid granular powder that has good electrostatic spraying performance, chemical resistance, and anti-corrosive properties. It can be used in epoxy polye...展开 Epoxy Resin E-12 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a light yellow, solid granular powder that has good electrostatic spraying performance, chemical resistance, and anti-corrosive properties. It can be used in epoxy polyester powder coatings, or mixed with an amine curing agent for use in anti-corrosion and insulation coatings. 收起
Epoxy Resin E-14 Anhui Shanfu New Material Technology Co., Ltd. Epoxy Resin E-14 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a light yellow, solid granular powder that has good electrostatic spraying performance, chemical resistance, and anti-corrosive properties. It can be used in top-grade e...展开 Epoxy Resin E-14 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a light yellow, solid granular powder that has good electrostatic spraying performance, chemical resistance, and anti-corrosive properties. It can be used in top-grade epoxy polyester powder coatings, electrophoretic paints, and anti-corrosion coatings. 收起
Epoxy Resin E-20 Anhui Shanfu New Material Technology Co., Ltd. Epoxy Resin E-20 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a light yellow, solid granular powder that has good bending performance, chemical resistance, solvent resistance, and strong adhesion properties. It can be used in anti-...展开 Epoxy Resin E-20 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a light yellow, solid granular powder that has good bending performance, chemical resistance, solvent resistance, and strong adhesion properties. It can be used in anti-corrosion coatings, zinc powder primers, floor coatings, decorative coatings and varnishes. 收起
Epoxy Resin SF801 Anhui Shanfu New Material Technology Co., Ltd. Epoxy Resin SF801 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a transparent granular powder that is curable at room temperature or higher temperatures. It can be used in anti-corrosion coatings, electrophoretic paint, floor coatin...展开 Epoxy Resin SF801 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a transparent granular powder that is curable at room temperature or higher temperatures. It can be used in anti-corrosion coatings, electrophoretic paint, floor coatings, decorative coatings, and powder coatings. It has an epoxy equivalent of 450-520 g/eq and a softening point of 65-75°C. 收起
Epoxy Resin SF801A Anhui Shanfu New Material Technology Co., Ltd. Epoxy Resin SF801A is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a transparent granular powder that is curable at room temperature or higher temperatures. It can be used in anti-corrosion coatings, electrophoretic paint, floor coati...展开 Epoxy Resin SF801A is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a transparent granular powder that is curable at room temperature or higher temperatures. It can be used in anti-corrosion coatings, electrophoretic paint, floor coatings, decorative coatings, and powder coatings. It has an epoxy equivalent of 530-570 g/eq and a softening point of 65-75°C. 收起
Epoxy Resin SF808 Anhui Shanfu New Material Technology Co., Ltd. Epoxy Resin SF808 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a transparent, solid granular powder that has good electrostatic spraying performance and plate leveling capacity. It can be used in top-grade epoxy polyester powder co...展开 Epoxy Resin SF808 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a transparent, solid granular powder that has good electrostatic spraying performance and plate leveling capacity. It can be used in top-grade epoxy polyester powder coatings, electrophoretic paints, and anti-corrosion coatings. 收起
Epoxy Resin SF818 Anhui Shanfu New Material Technology Co., Ltd. Epoxy Resin SF818 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a transparent, solid granular powder that has good mechanical performance and electrostatic spraying performance. It can be used in electrophoretic paints, top-grade ep...展开 Epoxy Resin SF818 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a transparent, solid granular powder that has good mechanical performance and electrostatic spraying performance. It can be used in electrophoretic paints, top-grade epoxy poleyster powder coatings, and anti-corrosion coatings. 收起
Epoxy Resin SF828 Anhui Shanfu New Material Technology Co., Ltd. Epoxy Resin SF828 is a MMW solid Bisphenol-A type epoxy resin. This product appears as a transparent, solid granular powder that has good electrostatic spraying performance, chemical resistance, and high impact strength. It can be used in electrophoretic ...展开 Epoxy Resin SF828 is a MMW solid Bisphenol-A type epoxy resin. This product appears as a transparent, solid granular powder that has good electrostatic spraying performance, chemical resistance, and high impact strength. It can be used in electrophoretic paints, top-grade epoxy polyester powder coatings, and anti-corrosion coatings. 收起
Epoxy Resin SF838 Anhui Shanfu New Material Technology Co., Ltd. Epoxy Resin SF838 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a transparent, solid granular powder that has good chemical resistance, electrostatic spraying performance, and anti-corrosive properties. It can be used in electrophor...展开 Epoxy Resin SF838 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a transparent, solid granular powder that has good chemical resistance, electrostatic spraying performance, and anti-corrosive properties. It can be used in electrophoretic paints and anti-corrosion coatings. 收起
ExBar™ 200 Excalibar Minerals LLC ExBar™ 200 is a raw mineral material that is manufactured from natural barium sulfate ore. This product is used in many different applications such as paints, adhesives and sealants. It has a median particle size of 15.0u and an oil absorption of 9.
ExBar™ 325 Excalibar Minerals LLC ExBar™ 325 is a raw mineral material that is manufactured from natural barium sulfate ore. This product is used in many different applications such as paints, adhesives and sealants. It has a median particle size of 10.0u and an oil absorption of 10.
ExBar™ 400 Excalibar Minerals LLC ExBar™ 400 is a raw mineral material that is manufactured from natural barium sulfate ore. This product is used in many different applications such as paints, adhesives and sealants. It has a median particle size of 8.0u and an oil absorption of 12.
ExBar™ W 1 Excalibar Minerals LLC ExBar™ W 1 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 1 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 1u and an oil absorption of 15. 收起
ExBar™ W 2 Excalibar Minerals LLC ExBar™ W 2 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 2 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 2u and an oil absorption of 13. 收起
ExBar™ W 3 Excalibar Minerals LLC ExBar™ W 3 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 3 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 3u and an oil absorption of 13. 收起
ExBar™ W 325 Excalibar Minerals LLC ExBar™ W 325 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are pr...展开 ExBar™ W 325 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. 收起
ExBar™ W 4 Excalibar Minerals LLC ExBar™ W 4 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 4 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 4u and an oil absorption of 12. 收起
ExBar™ W 400 Excalibar Minerals LLC ExBar™ W 400 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are pr...展开 ExBar™ W 400 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 8u and an oil absorption of 10. 收起
ExCal® 100 Excalibar Minerals LLC ExCal® 100 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications.
ExCal® 200 Excalibar Minerals LLC ExCal® 200 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications.
ExCal® 325 Excalibar Minerals LLC ExCal® 325 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications.
ExCal® 400 Excalibar Minerals LLC ExCal® 400 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications.
ExCal® CW 100 Excalibar Minerals LLC ExCal® CW 100 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand ar...展开 ExCal® CW 100 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand are a standard. 收起
ExCal® CW 200 Excalibar Minerals LLC ExCal® CW 200 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand ar...展开 ExCal® CW 200 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand are a standard. 收起
ExCal® CW 325 Excalibar Minerals LLC ExCal® CW 325 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand ar...展开 ExCal® CW 325 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand are a standard. 收起
HESS NCS-10 Hess Pumice (NCS) Microfine Functional Fillers HESS NCS-10 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...展开 HESS NCS-10 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起
HESS NCS-12 Hess Pumice (NCS) Microfine Functional Fillers HESS NCS-12 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...展开 HESS NCS-12 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起
HESS NCS-15 Hess Pumice (NCS) Microfine Functional Fillers HESS NCS-15 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...展开 HESS NCS-15 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起
HESS NCS-3 Hess Pumice (NCS) Microfine Functional Fillers HESS NCS-3 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...展开 HESS NCS-3 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起
HESS NCS-5 Hess Pumice (NCS) Microfine Functional Fillers HESS NCS-5 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...展开 HESS NCS-5 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起
HESS NCS-8 Hess Pumice (NCS) Microfine Functional Fillers HESS NCS-8 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...展开 HESS NCS-8 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起
Hao Pu R-2196 CNNC Hua Yuan Titanium Dioxide Co., Ltd. Hao Pu R-2196 is a rutile titanium dioxide pigment that has been created by the sulfate process. This product appears as a white powder with high gloss, high weather resistance, and high hiding powder. It can be used in exterior and interior wall emulsion...展开 Hao Pu R-2196 is a rutile titanium dioxide pigment that has been created by the sulfate process. This product appears as a white powder with high gloss, high weather resistance, and high hiding powder. It can be used in exterior and interior wall emulsion paints, industrial coatings, and surface or tin printing inks. 收起
Hao Pu R-2219 CNNC Hua Yuan Titanium Dioxide Co., Ltd. Hao Pu R-2219 is a rutile titanium dioxide pigment that has been created by the sulfate process. This product appears as a white powder with high gloss, high dispersibility, and high temperature resistance. It can be used in powder coatings and traffic pa...展开 Hao Pu R-2219 is a rutile titanium dioxide pigment that has been created by the sulfate process. This product appears as a white powder with high gloss, high dispersibility, and high temperature resistance. It can be used in powder coatings and traffic paints. 收起
Hao Pu RM-1 CNNC Hua Yuan Titanium Dioxide Co., Ltd. Hao Pu RM-1 is a rutile titanium dioxide pigment that has been created by the sulfate process. This product has high hiding power, high dispersibility, and high weather resistance. It can be used in exterior and interior wall emulsion paints, industrial a...展开 Hao Pu RM-1 is a rutile titanium dioxide pigment that has been created by the sulfate process. This product has high hiding power, high dispersibility, and high weather resistance. It can be used in exterior and interior wall emulsion paints, industrial and powder coatings, and compound or flexible printing inks. 收起
KLX 7997 Nokxeller Quimica Ltda KLX 7997 is a versatile polyether based aromatic isocyanate anionic dispersion for high tack formulations. It has a very soft and flexible film that can be used as a high initial and final bond strength and heat resistance. Typical applications are for mo...展开 KLX 7997 is a versatile polyether based aromatic isocyanate anionic dispersion for high tack formulations. It has a very soft and flexible film that can be used as a high initial and final bond strength and heat resistance. Typical applications are for modifying pressure sensitive textile & construction adhesives, neoprene, EVA and other plastic & leather primer applications. Once crosslinked shows outstanding water resistance. 收起
Maleic Anhydride Yixing Qiancheng Bio-Engineering Co., Ltd. Maleic Anhydride is a white flaky crystalline granule with a heavy irritant odor that is soluble in alcohol, ether, acetone, water and maelic acid. This product is designed for use in the production of unsaturated polyester resins, coatings, pharmaceutics...展开 Maleic Anhydride is a white flaky crystalline granule with a heavy irritant odor that is soluble in alcohol, ether, acetone, water and maelic acid. This product is designed for use in the production of unsaturated polyester resins, coatings, pharmaceutics, agricultural insecticide, oil products, plastics and surfacants. Maleic Anhydride has a crystallization point of ≥52.4℃ and a molecular weight of 98.058. 收起
NKX 144 Nokxeller Quimica Ltda NKX 144 is a small particle size high gloss PU polyesther aliphatic topcoat. It forms a transparent film of medium hardness suitable as a final varnish or topcoat where high gloss, abrasion resistance and clarity are required. When crosslinked, presents e...展开 NKX 144 is a small particle size high gloss PU polyesther aliphatic topcoat. It forms a transparent film of medium hardness suitable as a final varnish or topcoat where high gloss, abrasion resistance and clarity are required. When crosslinked, presents excellent weatherability. It is ideal for use as a topcoat for leather finish and PVC, indoor paints formulation, etc. 收起
NKX 176 Nokxeller Quimica Ltda NKX 176 is a soft and elastic PUD with outstanding film-forming properties. NKX 176 is a NON IONIC VOC free soft non tacky and elastic PUD with outstanding film-forming properties. It can be used as a universal coating resin for textile due to its varied ...展开 NKX 176 is a soft and elastic PUD with outstanding film-forming properties. NKX 176 is a NON IONIC VOC free soft non tacky and elastic PUD with outstanding film-forming properties. It can be used as a universal coating resin for textile due to its varied possibility of uses. NKX 176 has a flexible and soft but non-tacky handle. It has varied applications especially in textile finishes where body handle, durability are required. It is ideal for use as a print binder and as an universal coating resin in textile applications, garment leather finish, and coatings for digital printing in fabrics. 收起
NKX 183 Nokxeller Quimica Ltda NKX 180 based resin, with higher concentration.Multipurpose resin of extreme adhesion, outstanding toughness and abrasion resistance suitable for coatings for the following substrates: plastic, synthetic fabric, metal, shoe finish, etc. Due to its high cr...展开 NKX 180 based resin, with higher concentration.Multipurpose resin of extreme adhesion, outstanding toughness and abrasion resistance suitable for coatings for the following substrates: plastic, synthetic fabric, metal, shoe finish, etc. Due to its high crystalline segment concentration the polymer presents itself tough, yet flexible and resistant. 收起
NKX 201 NMP-Free Nokxeller Quimica Ltda NKX 201 NMP-Free shows excellent chemical, weathering and abrasion resistance due to higher resistance of this kind of polyol. NKX 201 presents wide use possibilities considering its high gloss and transparency properties as in synthetic substrates, as hi...展开 NKX 201 NMP-Free shows excellent chemical, weathering and abrasion resistance due to higher resistance of this kind of polyol. NKX 201 presents wide use possibilities considering its high gloss and transparency properties as in synthetic substrates, as high gloss topcoats in leather finish, wood flooring or print screen putties, metallic applications. 收起
NKX 240 Nokxeller Quimica Ltda NKX 240 is a multipurpose resin of exceptional properties was developed to serve a wide range of applications for flexible and rigid substrates. NKX 240 shows up a clear film with good gloss retention and presents high adhesion and heat resistance.
NKX 245 Nokxeller Quimica Ltda NKX-245 is a modified polyester type suitable for glossy aqueous coatings as wood flooring. NKX 245 has a very hard film providing high abrasion resistance, and adhesion and can be easily formulated along with other components such as acrylic resins, pigm...展开 NKX-245 is a modified polyester type suitable for glossy aqueous coatings as wood flooring. NKX 245 has a very hard film providing high abrasion resistance, and adhesion and can be easily formulated along with other components such as acrylic resins, pigment dispersions, fillers, thickeners, etc. 收起
NKX 250 Nokxeller Quimica Ltda NKX-250 is a very hard PUD polyester type adequate for clear or pigmented waterbased topcoat for rigid substrates specially furniture, metal or hard synthetic substrates. Its hard, transparent and glossy film provides good abrasion resistance, adhesion an...展开 NKX-250 is a very hard PUD polyester type adequate for clear or pigmented waterbased topcoat for rigid substrates specially furniture, metal or hard synthetic substrates. Its hard, transparent and glossy film provides good abrasion resistance, adhesion and gloss. 收起
NKX 274 Nokxeller Quimica Ltda NKX 274 is a high solid small particle size resin with excellent chemical resistance. It is adequate for varied market segments wherever is necessary to replace a solventborne for a waterborne paint. Typical uses in metal, soles, PVC, other synthetic subs...展开 NKX 274 is a high solid small particle size resin with excellent chemical resistance. It is adequate for varied market segments wherever is necessary to replace a solventborne for a waterborne paint. Typical uses in metal, soles, PVC, other synthetic substrate paint compositions wherever high gloss, good adhesions and chemical resistance are necessary. 收起
NKX 279 Nokxeller Quimica Ltda NKX 279 is a fine particle size resin and developed to formulate water topcoats of high adhesion and very good chemical resistance. Typical end use applications include top coatings for rigid and flexible substrates including wood, paper, metallic surface...展开 NKX 279 is a fine particle size resin and developed to formulate water topcoats of high adhesion and very good chemical resistance. Typical end use applications include top coatings for rigid and flexible substrates including wood, paper, metallic surface , plastics and especially PVC and other synthetic laminates.NKX 279 is high performance water based coating and can replace traditional solvent based coatings in wide applications possibilities. 收起
Nipol® 1001 Zeon Corporation Nipol® 1001 is a high nitrile rubber (NBR) that can be used in strong cements and adhesives. This product is a standard high acrylonitrile NBR for hot polymerization systems. Its specific gravity is 1.00 and it contains 40.5% bound acrylonitrile NBR.
Nipol® 1041 Zeon Corporation Nipol® 1041 is a high nitrile rubber (NBR) that can be used in strong cements and adhesives. This product is a standard high acrylonitrile NBR for cold polymerization systems. Its specific gravity is 1.00 and it contains 40.5% bound acrylonitrile NBR.
Nipol® 1041L Zeon Corporation Nipol® 1041L is a high nitrile rubber (NBR) that can be used in strong cements and adhesives. This product is a standard high acrylonitrile NBR for cold polymerization systems. Its specific gravity is 1.00 and it contains 40.5% bound acrylonitrile NBR. ...展开 Nipol® 1041L is a high nitrile rubber (NBR) that can be used in strong cements and adhesives. This product is a standard high acrylonitrile NBR for cold polymerization systems. Its specific gravity is 1.00 and it contains 40.5% bound acrylonitrile NBR. This product is a low Mooney version of N21 that provides good processability. 收起
Nipol® 1072 Zeon Corporation Nipol® 1072 is a high nitrile rubber (NBR) terpolymer that can be used in adhesives and industrial parts. This product is a carboxylated NBR that provides good abrasion resistance and tensile strength. Its specific gravity is 0.98 and it contains 27.0% ...展开 Nipol® 1072 is a high nitrile rubber (NBR) terpolymer that can be used in adhesives and industrial parts. This product is a carboxylated NBR that provides good abrasion resistance and tensile strength. Its specific gravity is 0.98 and it contains 27.0% bound acrylonitrile NBR. 收起
Nipol® 1562 Zeon Corporation Nipol® 1562 is a latex of an acrylonitrile butadiene copolymer that can be used in adhesives. This product's pH is 10.0 and it contains 41% solids. Its average particle diameter is 50 nanometers, and its glass transition temperature is -21 degrees Celsi...展开 Nipol® 1562 is a latex of an acrylonitrile butadiene copolymer that can be used in adhesives. This product's pH is 10.0 and it contains 41% solids. Its average particle diameter is 50 nanometers, and its glass transition temperature is -21 degrees Celsius. 收起
Nipol® 1571C2 Zeon Corporation Nipol® 1571C2 is a latex of an acrylonitrile butadiene rubber that can be used in adhesives. This product's pH is 8.5 and it contains 45% solids. Its average particle diameter is 120 nanometers and its glass transition temperature is -10 degrees Celsius...展开 Nipol® 1571C2 is a latex of an acrylonitrile butadiene rubber that can be used in adhesives. This product's pH is 8.5 and it contains 45% solids. Its average particle diameter is 120 nanometers and its glass transition temperature is -10 degrees Celsius. 收起
Nipol® 1571CL Zeon Corporation Nipol® 1571CL is a latex of an acrylonitrile butadiene rubber that can be used in adhesives. This product's pH is 8.0 and it contains 38% solids. Its average particle diameter is 100 nanometers and its glass transition temperature is -11 degrees Celsius...展开 Nipol® 1571CL is a latex of an acrylonitrile butadiene rubber that can be used in adhesives. This product's pH is 8.0 and it contains 38% solids. Its average particle diameter is 100 nanometers and its glass transition temperature is -11 degrees Celsius. 收起
Nipol® 1571H Zeon Corporation Nipol® 1571H is a latex of an acrylonitrile butadiene copolymer that can be used in adhesives. This product's pH is 8.3 and it contains 40% solids. Its average particle diameter is 120 nanometers and its glass transition temperature is -8 degrees Celsiu...展开 Nipol® 1571H is a latex of an acrylonitrile butadiene copolymer that can be used in adhesives. This product's pH is 8.3 and it contains 40% solids. Its average particle diameter is 120 nanometers and its glass transition temperature is -8 degrees Celsius. 收起
Nipol® DN101 Zeon Corporation Nipol® DN101 is a high nitrile rubber (NBR) that can be used in strong cements and adhesives. This product has good resistance to mold fouling and good metal corrosion resistance. Its specific gravity is 1.00 and it contains 42.5% bound acrylonitrile ru...展开 Nipol® DN101 is a high nitrile rubber (NBR) that can be used in strong cements and adhesives. This product has good resistance to mold fouling and good metal corrosion resistance. Its specific gravity is 1.00 and it contains 42.5% bound acrylonitrile rubber. 收起
Nipol® DN101L Zeon Corporation Nipol® DN101L is a high nitrile rubber (NBR) that can be used in strong cements and adhesives. This product has good resistance to mold fouling and good metal corrosion resistance. Its specific gravity is 1.00 and it contains 42.5% bound acrylonitrile r...展开 Nipol® DN101L is a high nitrile rubber (NBR) that can be used in strong cements and adhesives. This product has good resistance to mold fouling and good metal corrosion resistance. Its specific gravity is 1.00 and it contains 42.5% bound acrylonitrile rubber. This product has a lower Mooney viscosity than DN101. 收起
Nipol® LX110 Zeon Corporation Nipol® LX110 is a latex of a styrene-butadiene copolymer that can be used adhesives. This product's pH is 11.5 and it contains 40.5% solids. its average particle diameter is 80 nanometers and its glass transition temperature is -47 degrees Celsius.
Nipol® LX112 Zeon Corporation Nipol® LX112 is a latex of a styrene-butadiene copolymer that can be used in adhesives. This product's pH is 11.0 and it contains 40.5% solids. Its average particle diameter is 80 nanometers and its glass transition temperature is -47 degrees Celsius.
Nipol® LX426 Zeon Corporation Nipol® LX426 is a latex of a styrene-butadiene copolymer that can be used in adhesives. This product's pH is 8.5 and it contains 50% solids. Its average particle diameter is 120 nanometers and its glass transition temperature is -39 degrees Celsius.
Nipol® LX430 Zeon Corporation Nipol® LX430 is a latex of a styrene-butadiene copolymer that can be used in wood adhesives. This product's pH is 7.0 and it contains 49% solids. Its average particle diameter is 150 nanometers and its glass transition temperature is 12 degrees Celsius.
Nipol® LX432M Zeon Corporation Nipol® LX432M is a latex of a styrene-butadiene copolymer that can be used in adhesives and primers for masking tape. This product's pH is 8.0 and it contains 41% solids. Its average particle diameter is 130 nanometers and its glass transition temperatu...展开 Nipol® LX432M is a latex of a styrene-butadiene copolymer that can be used in adhesives and primers for masking tape. This product's pH is 8.0 and it contains 41% solids. Its average particle diameter is 130 nanometers and its glass transition temperature is -55 degrees Celsius. 收起
Nipol® LX435 Zeon Corporation Nipol® LX435 is a latex of a styrene-butadiene copolymer that can be used in adhesives. This product's pH is 8.5 and it contains 50% solids. Its average particle diameter is 120 nanometers and its glass transition temperature is -14 degrees Celsius.
Nipol® LX473D Zeon Corporation Nipol® LX473D is a latex of a styrene-butadiene copolymer that can be used in flooring adhesives. This product's average particle diameter is 80 nanometers and it contains 47.5% solids. Its pH is 8.5 and its glass transition temperature is -15 degrees C...展开 Nipol® LX473D is a latex of a styrene-butadiene copolymer that can be used in flooring adhesives. This product's average particle diameter is 80 nanometers and it contains 47.5% solids. Its pH is 8.5 and its glass transition temperature is -15 degrees Celsius. 收起
Nipol® LX511A Zeon Corporation Nipol® LX511A is a latex of an acrylonitrile butadiene copolymer that can be used in adhesives. This product's pH is 8.0 and it contains 46% solids. Its average particle diameter is 170 nanometers and its glass transition temperature is -19 degrees Cels...展开 Nipol® LX511A is a latex of an acrylonitrile butadiene copolymer that can be used in adhesives. This product's pH is 8.0 and it contains 46% solids. Its average particle diameter is 170 nanometers and its glass transition temperature is -19 degrees Celsius. 收起
Nipol® LX513 Zeon Corporation Nipol® LX513 is a latex of an acrylonitrile butadiene copolymer that can be used in adhesives. This product's pH is 10.0 and it contains 45% solids. Its average particle diameter is 140 nanometers and its glass transition temperature is -31 degrees Cels...展开 Nipol® LX513 is a latex of an acrylonitrile butadiene copolymer that can be used in adhesives. This product's pH is 10.0 and it contains 45% solids. Its average particle diameter is 140 nanometers and its glass transition temperature is -31 degrees Celsius. 收起
Nipol® LX517B Zeon Corporation Nipol® LX517B is a latex of an acrylonitrile butadiene copolymer that can be used in adhesives. This product's pH is 8.0 and it contains 40% solids. Its average particle diameter is 120 nanometers and its glass transition temperature is -16 degrees Cels...展开 Nipol® LX517B is a latex of an acrylonitrile butadiene copolymer that can be used in adhesives. This product's pH is 8.0 and it contains 40% solids. Its average particle diameter is 120 nanometers and its glass transition temperature is -16 degrees Celsius. 收起
Nipol® LX550 Zeon Corporation Nipol® LX550 is a latex of an acrylonitrile butadiene copolymer that can be used in adhesives. This product's pH is 8.5 and it contains 45% solids. Its average particle diameter is 110 nanometers and its glass transition temperature is -27 degrees Celsi...展开 Nipol® LX550 is a latex of an acrylonitrile butadiene copolymer that can be used in adhesives. This product's pH is 8.5 and it contains 45% solids. Its average particle diameter is 110 nanometers and its glass transition temperature is -27 degrees Celsius. 收起
Nipol® LX550L Zeon Corporation Nipol® LX550L is a latex of an acrylonitrile butadiene copolymer that can be used in adhesives. This product's pH is 8.3 and it contains 45% solids. Its average particle diameter is 110 nanometers and its glass transition temperature is -27 degrees Cels...展开 Nipol® LX550L is a latex of an acrylonitrile butadiene copolymer that can be used in adhesives. This product's pH is 8.3 and it contains 45% solids. Its average particle diameter is 110 nanometers and its glass transition temperature is -27 degrees Celsius. 收起
Nipol® LX551 Zeon Corporation Nipol® LX551 is a latex of an acrylonitrile butadiene copolymer that can be used in adhesives. This product's pH is 8.5 and it contains 45% solids. Its average particle diameter is 120 nanometers and its glass transition temperature is -14 degrees Celsi...展开 Nipol® LX551 is a latex of an acrylonitrile butadiene copolymer that can be used in adhesives. This product's pH is 8.5 and it contains 45% solids. Its average particle diameter is 120 nanometers and its glass transition temperature is -14 degrees Celsius. 收起
Nipol® LX552 Zeon Corporation Nipol® LX552 is a latex of an acrylonitrile butadiene copolymer that can be used in adhesives. This product's pH is 8.0 and it contains 45% solids. Its average particle diameter is 110 nanometers and its glass transition temperature is -12 degrees Celsi...展开 Nipol® LX552 is a latex of an acrylonitrile butadiene copolymer that can be used in adhesives. This product's pH is 8.0 and it contains 45% solids. Its average particle diameter is 110 nanometers and its glass transition temperature is -12 degrees Celsius. 收起
Nipol® LX811H Zeon Corporation Nipol® LX811H is a latex of copolymerized alkylester acrylic acid and alkylester metacrylic acid, which can be used in adhesives. This product's pH is 6.5 and it contains 50% solids. Its viscosity is 170 mPas and its glass transition temperature is 1 de...展开 Nipol® LX811H is a latex of copolymerized alkylester acrylic acid and alkylester metacrylic acid, which can be used in adhesives. This product's pH is 6.5 and it contains 50% solids. Its viscosity is 170 mPas and its glass transition temperature is 1 degree Celsius. 收起
Nipol® LX814 Zeon Corporation Nipol® LX814 is a latex of copolymerized alkylester acrylic acid and alkylester metacrylic acid, which can be used in adhesives. This product's pH is 6.0 and it contains 46% solids. Its viscosity is 30 mPas and its glass transition temperature is 25 deg...展开 Nipol® LX814 is a latex of copolymerized alkylester acrylic acid and alkylester metacrylic acid, which can be used in adhesives. This product's pH is 6.0 and it contains 46% solids. Its viscosity is 30 mPas and its glass transition temperature is 25 degrees Celsius. 收起
Nipol® LX816A Zeon Corporation Nipol® LX816A is a latex of copolymerized alkylester acrylic acid and alkylester metacrylic acid, which can be used in adhesives and pigment printing. This product's pH is 2.0 and it contains 42% solids. Its viscosity is 30 mPas and its glass transition...展开 Nipol® LX816A is a latex of copolymerized alkylester acrylic acid and alkylester metacrylic acid, which can be used in adhesives and pigment printing. This product's pH is 2.0 and it contains 42% solids. Its viscosity is 30 mPas and its glass transition temperature is -10 degrees Celsius. 收起
Nipol® LX820A Zeon Corporation Nipol® LX820A is a latex of copolymerized alkylester acrylic acid and alkylester metacrylic acid, which can be used in adhesives and paints. This product's pH is 7.5 and it contains 55% solids. Its viscosity is 3,000 mPas and its glass transition temper...展开 Nipol® LX820A is a latex of copolymerized alkylester acrylic acid and alkylester metacrylic acid, which can be used in adhesives and paints. This product's pH is 7.5 and it contains 55% solids. Its viscosity is 3,000 mPas and its glass transition temperature is -43 degrees Celsius. 收起
Nipol® LX851C Zeon Corporation Nipol® LX851C is a latex of copolymerized alkylester acrylic acid and alkylester metacrylic acid that can be used in pigment printing applications. This product contains extremely low formaldehyde and resists discoloration from light and age. It cont...展开 Nipol® LX851C is a latex of copolymerized alkylester acrylic acid and alkylester metacrylic acid that can be used in pigment printing applications. This product contains extremely low formaldehyde and resists discoloration from light and age. It contains 45% solids and its pH is 6.5. 收起
Nipol® LX851E Zeon Corporation Nipol® LX851E is a latex of copolymerized alkylester acrylic acid and alkylester metacrylic acid that can be used in pigment printing applications. This product contains extremely low formaldehyde and resists discoloration from light and age. It contai...展开 Nipol® LX851E is a latex of copolymerized alkylester acrylic acid and alkylester metacrylic acid that can be used in pigment printing applications. This product contains extremely low formaldehyde and resists discoloration from light and age. It contains 45% solids and its pH is 6.0. 收起
Nipol® LX851F2 Zeon Corporation Nipol® LX851F2 is a latex of copolymerized alkylester acrylic acid and alkylester metacrylic acid that can be used in pigment printing applications. This product contains extremely low formaldehyde and resists discoloration from light and age. It contain...展开 Nipol® LX851F2 is a latex of copolymerized alkylester acrylic acid and alkylester metacrylic acid that can be used in pigment printing applications. This product contains extremely low formaldehyde and resists discoloration from light and age. It contains 45% solids and its pH is 7.0. 收起
Nipol® LX852B Zeon Corporation Nipol® LX852B is a latex of copolymerized alkylester acrylic acid and alkylester metacrylic acid that can be used in pigment printing applications. This product contains extremely low formaldehyde and resists discoloration from light and age. It contains...展开 Nipol® LX852B is a latex of copolymerized alkylester acrylic acid and alkylester metacrylic acid that can be used in pigment printing applications. This product contains extremely low formaldehyde and resists discoloration from light and age. It contains 45% solids and its pH is 6.5. 收起
Nipol® LX854E Zeon Corporation Nipol® LX854E is a latex of copolymerized alkylester acrylic acid and alkylester metacrylic acid that can be used in pigment printing applications. This product contains low formaldehyde and 45% solids. Its pH is 6.5 and its glass transition temperature...展开 Nipol® LX854E is a latex of copolymerized alkylester acrylic acid and alkylester metacrylic acid that can be used in pigment printing applications. This product contains low formaldehyde and 45% solids. Its pH is 6.5 and its glass transition temperature is -10 degrees Celsius. 收起
Nipol® LX874 Zeon Corporation Nipol® LX874 is a latex of copolymerized alkylester acrylic acid and alkylester metacrylic acid, which can be used in adhesives and pigment printing. This product is resistant to dry cleaning with good waterproofing characteristics. It contains 45% soli...展开 Nipol® LX874 is a latex of copolymerized alkylester acrylic acid and alkylester metacrylic acid, which can be used in adhesives and pigment printing. This product is resistant to dry cleaning with good waterproofing characteristics. It contains 45% solids and its pH is 6.5. 收起
Quintone® 1325 Zeon Corporation Quintone® 1325 is a petroleum resin made mainly from high-purity dicyclopentadiene that has been abstracted from C5 fractions. This product can be used in oil and alkyd paints, printing inks, and as a tackifier for rubber adhesives. Its softening point ...展开 Quintone® 1325 is a petroleum resin made mainly from high-purity dicyclopentadiene that has been abstracted from C5 fractions. This product can be used in oil and alkyd paints, printing inks, and as a tackifier for rubber adhesives. Its softening point is 125 degrees Celsius and its molecular weight is 460. 收起
Quintone® 1345 Zeon Corporation Quintone® 1345 is a petroleum resin made mainly from high-purity dicyclopentadiene that has been abstracted from C5 fractions. This product can be used in oil and alkyd paints, printing inks, and as a tackifier for rubber adhesives. Its softening point ...展开 Quintone® 1345 is a petroleum resin made mainly from high-purity dicyclopentadiene that has been abstracted from C5 fractions. This product can be used in oil and alkyd paints, printing inks, and as a tackifier for rubber adhesives. Its softening point is 140 degrees Celsius and its molecular weight is 500. 收起
Quintone® 1500 Zeon Corporation Quintone® 1500 is a petroleum resin made mainly from high-purity dicyclopentadiene that has been abstracted from C5 fractions. This product can be used in nitrocellulose lacquer alkyd epoxies, polyester paints, and adhesives. Its softening point is 100 ...展开 Quintone® 1500 is a petroleum resin made mainly from high-purity dicyclopentadiene that has been abstracted from C5 fractions. This product can be used in nitrocellulose lacquer alkyd epoxies, polyester paints, and adhesives. Its softening point is 100 degrees Celsius and its molecular weight is 420. 收起
Quintone® 1525L Zeon Corporation Quintone® 1525L is a petroleum resin made mainly from high-purity dicyclopentadiene that has been abstracted from C5 fractions. This product can be used in nitrocellulose lacquer alkyd epoxies, polyester paints, and adhesives. Its softening point is 125...展开 Quintone® 1525L is a petroleum resin made mainly from high-purity dicyclopentadiene that has been abstracted from C5 fractions. This product can be used in nitrocellulose lacquer alkyd epoxies, polyester paints, and adhesives. Its softening point is 125 degrees Celsius and its molecular weight is 470. 收起
Quintone® A100 Zeon Corporation Quintone® A100 is a petroleum resin made mainly from high-purity 1,3-pentadiene that has been abstracted from C5 fractions. This product can be used in adhesives for natural rubber. Its softening point is 100 degrees Celsius and it contains less than 0....展开 Quintone® A100 is a petroleum resin made mainly from high-purity 1,3-pentadiene that has been abstracted from C5 fractions. This product can be used in adhesives for natural rubber. Its softening point is 100 degrees Celsius and it contains less than 0.1 mg of potassium hydroxide per gram. 收起
Quintone® B170 Zeon Corporation Quintone® B170 is a petroleum resin made mainly from high-purity 1,3-pentadiene that has been abstracted from C5 fractions. This product can be used in adhesives. Its softening point is 70 degrees Celsius, and it contains less than 0.1 mg of potassium h...展开 Quintone® B170 is a petroleum resin made mainly from high-purity 1,3-pentadiene that has been abstracted from C5 fractions. This product can be used in adhesives. Its softening point is 70 degrees Celsius, and it contains less than 0.1 mg of potassium hydroxide per gram. 收起
Quintone® C200H (ZCT) Zeon Corporation Quintone® C200H (ZCT) is a petroleum resin made mainly from 1,3-pentadiene that has been abstracted from C5 fractions. This product can be used in hot-melt traffic paints and provides good heat stability and colors. Its softening point is 101 degrees Ce...展开 Quintone® C200H (ZCT) is a petroleum resin made mainly from 1,3-pentadiene that has been abstracted from C5 fractions. This product can be used in hot-melt traffic paints and provides good heat stability and colors. Its softening point is 101 degrees Celsius and it contains 1.7 mg of potassium hydroxide per gram. 收起
Quintone® C200S Zeon Corporation Quintone® C200S is a petroleum made mainly from 1,3-pentadiene that has been abstracted from C5 fractions. This product can be used in hot-melt traffic paints and provides good heat stability and colors. Its softening point is 96 degrees Celsius and it ...展开 Quintone® C200S is a petroleum made mainly from 1,3-pentadiene that has been abstracted from C5 fractions. This product can be used in hot-melt traffic paints and provides good heat stability and colors. Its softening point is 96 degrees Celsius and it contains 1.7 mg of potassium hydroxide per gram. 收起
Quintone® C210 (ZCT) Zeon Corporation Quintone® C210 (ZCT) is a petroleum resin made mainly from 1,3-pentadiene that has been abstracted from C5 fractions. This product can be used in hot-melt traffic paints and provides good heat stability and colors. Its softening point is 110 degrees Cel...展开 Quintone® C210 (ZCT) is a petroleum resin made mainly from 1,3-pentadiene that has been abstracted from C5 fractions. This product can be used in hot-melt traffic paints and provides good heat stability and colors. Its softening point is 110 degrees Celsius and it contains 1.7 mg of potassium hydroxide per gram. 收起
Quintone® D100 Zeon Corporation Quintone® D100 is a petroleum resin made mainly from 1,3-pentadiene that has been abstracted from C5 and C9 fractions. This product is compatible with SBR and EVA and can be used in adhesive tapes and hot melt adhesives. Its softening point is 99 degree...展开 Quintone® D100 is a petroleum resin made mainly from 1,3-pentadiene that has been abstracted from C5 and C9 fractions. This product is compatible with SBR and EVA and can be used in adhesive tapes and hot melt adhesives. Its softening point is 99 degrees Celsius and contains less than 0.1 mg of potassium hydroxide per gram. 收起