| AEPD® VOX 1000 | ANGUS Chemical Company 安格斯化学公司 | 一个新的多官能团添加剂，用于低气味，零VOC户内水性油漆。它具有非常温和的气味，高沸点和低蒸汽压。这些特点使之成为需要符合EU directive 2004/42/EC法规的油漆生产商一个理想的配方工具 | |
| ALKATERGE®-T | ANGUS Chemical Company 安格斯化学公司 | ALKATERGE®-T is one of a series of oxazoline-type non-volatile surface active agents, and is only slightly soluble in water. It is an excellent aid for the dispersion of pigments (nonaqueous solvents base) and also indicated as a primary water in oil emu...展开 ALKATERGE®-T is one of a series of oxazoline-type non-volatile surface active agents, and is only slightly soluble in water. It is an excellent aid for the dispersion of pigments (nonaqueous solvents base) and also indicated as a primary water in oil emulsifier. At ordinary room temperature, ALKATERGE®-T is a waxy solid which is highly soluble in aromatic hydrocarbons and lower alcohols or ketones, moderately soluble in aliphatic hydrocarbons, and miscible with most vegetable oils. In its liquid state, ALKATERGE®-T is miscible with almost all organic liquids. ALKATERGE®-T is useful as a surface active agent which is indicated by the fact that 0.1% in mineral oil reduces the interfacial surface tension against water approximately 95%, or to less than 2 dynes/cm. 收起 | |
| AMP® | ANGUS Chemical Company 安格斯化学公司 | 这是一种无色，低粘度流体，大量用于金属加工流体，涂料，锅炉水体系和个人护理等领域。它可用作中和树脂的胺，协同分散剂，脱甲醛剂，腐蚀抑制剂以及作为合成的原料。 | |
| AMP-95® | ANGUS Chemical Company 安格斯化学公司 | 被普遍认为是一种用于所有类型的乳胶漆的多功能添加剂。 | |
| AVANTANE® PA 4000 | ANGUS Chemical Company 安格斯化学公司 | 一种专门设计用于满足溶剂型轮转凹印和柔印印刷性能要求的添加剂。 | |
| DMAMP-80® | ANGUS Chemical Company 安格斯化学公司 | DMAMP-80® (80% aqueous solution of 2-dimethylamino-2-methyl-1-propanol) is one of the strongest tertiary amines commercially available. Because it is a strong base, DMAMP-80™ can be used in water systems to provide formulations of exceptional clarity, wet...展开 DMAMP-80® (80% aqueous solution of 2-dimethylamino-2-methyl-1-propanol) is one of the strongest tertiary amines commercially available. Because it is a strong base, DMAMP-80™ can be used in water systems to provide formulations of exceptional clarity, wettability and stability. This product is recommended for use as an emulsifying agent, corrosion inhibitor, resin solubilizer, catalyst, additive, and synthesis agent. 收起 | |
| ECOPOL-518P | Economy Polymers & Chemicals | ECOPOL-518P is a chemically modified guar designed to provide thixotropic, shear-thinning viscosity over a broad pH range. This product appears as a yellow powder and is intended for use as a thickening agent in aqueous emulsion paint systems. | |
| ECOPOL-PP18S | Economy Polymers & Chemicals | ECOPOL-PP18S is a chemically modified guar designed to provide thixotropic, shear-thinning viscosity over a broad pH range. This product appears as a yellow powder and is intended for use as a thickening agent in aqueous emulsion paint systems. | |
| ECOPOL-PP400S | Economy Polymers & Chemicals | ECOPOL-PP400S is a chemically modified guar designed to provide thixotropic, shear-thinning viscosity over a broad pH range. This product is intended for use as a thickening agent in aqueous emulsion paint systems. | |
| ECOPOL-PP518S | Economy Polymers & Chemicals | ECOPOL-PP518S is a chemically modified guar designed to provide thixotropic, shear-thinning viscosity over a broad pH range. This product is intended for use as a thickening agent in aqueous emulsion paint systems. | |
| FLEXITANE® CA 6000 | ANGUS Chemical Company 安格斯化学公司 | 一种经过改进的万能专业涂料助剂，是一种有效的溶液，能够满足涂料配方的要求，减少特殊助剂的用量。 | |
| GENGLAZE® EC-2447 | Synthomer | GENGLAZE® EC-2447 is a heat-activated in-mold coating designed to enhance the surface of molded parts. GENGLAZE® EC-2447 in-mold coating surface finish is incorporated during compression molding instead of being applied separately. It is environmentally f...展开 GENGLAZE® EC-2447 is a heat-activated in-mold coating designed to enhance the surface of molded parts. GENGLAZE® EC-2447 in-mold coating surface finish is incorporated during compression molding instead of being applied separately. It is environmentally friendly as it does not contain solvents (100% solids), and reduces the number of surface finishing steps and manufacturing costs. 收起 | |
| MOR-SHINE™ 4U | Synthomer | MOR-SHINE™ 4U is a general purpose and cost effective floor polish concentrate. MOR-SHINE™ 4U dry-bright polish concentrate with excellent gloss retention, as well as mar and scratch resistance, is used for general purpose finishes that respond to low and...展开 MOR-SHINE™ 4U is a general purpose and cost effective floor polish concentrate. MOR-SHINE™ 4U dry-bright polish concentrate with excellent gloss retention, as well as mar and scratch resistance, is used for general purpose finishes that respond to low and high maintenance schedules. 收起 | |
| MOR-SHINE™ ULTRA CSG | Synthomer | MOR-SHINE™ ULTRA CSG is a concentrated surface protectant for use on polished or decorative concrete surfaces. MOR-SHINE™ ULTRA CSG penetrates into functional concrete surfaces and provides excellent durability and protection from stains and abrasion. | |
| ONEX MB 1000RE | Glonatech S.A. | ONEX MB 1000RE is a multi-wall carbon nanotube masterbatch that is designed to provide high dispersion, thermal stability, and thermal conductivity. This product is a liquid dispersion and tested with microscopic analysis techniques. Common applications o...展开 ONEX MB 1000RE is a multi-wall carbon nanotube masterbatch that is designed to provide high dispersion, thermal stability, and thermal conductivity. This product is a liquid dispersion and tested with microscopic analysis techniques. Common applications of this product include adhesives, marine coatings, and resin-based parts. 收起 | |
| ONEX MW 1000C1 | Glonatech S.A. | ONEX MW 1000C1 are high purity, multi-wall carbon nanotubes that are designed to provide mechanical, electrical, and thermal properties in final products where a high strength to weight ratio is required. This product has a carbon purity of ≥94.0% and is ...展开 ONEX MW 1000C1 are high purity, multi-wall carbon nanotubes that are designed to provide mechanical, electrical, and thermal properties in final products where a high strength to weight ratio is required. This product has a carbon purity of ≥94.0% and is commonly applied in coatings and automotive/marine applications. 收起 | |
| ONEX MW 1000C2 | Glonatech S.A. | ONEX MW 1000C2 are high purity, multi-wall carbon nanotubes that are designed to provide mechanical, electrical, and thermal properties in final products where a high strength to weight ratio is required. This product has a carbon purity of ≥90.0% and is ...展开 ONEX MW 1000C2 are high purity, multi-wall carbon nanotubes that are designed to provide mechanical, electrical, and thermal properties in final products where a high strength to weight ratio is required. This product has a carbon purity of ≥90.0% and is commonly applied in coatings and automotive/marine applications. 收起 | |
| ONEX MW 1000C3 | Glonatech S.A. | ONEX MW 1000C3 are high purity, multi-wall carbon nanotubes that are designed to provide mechanical, electrical, and thermal properties in final products where a high strength to weight ratio is required. This product has a carbon purity of ≥98.0% and is ...展开 ONEX MW 1000C3 are high purity, multi-wall carbon nanotubes that are designed to provide mechanical, electrical, and thermal properties in final products where a high strength to weight ratio is required. This product has a carbon purity of ≥98.0% and is commonly applied in coatings and automotive/marine applications. 收起 | |
| ONEX MW 1000C4 | Glonatech S.A. | ONEX MW 1000C4 are high purity, multi-wall carbon nanotubes that are designed to provide mechanical, electrical, and thermal properties in final products where a high strength to weight ratio is required. This product has a carbon purity of ≥90.0-98.0% an...展开 ONEX MW 1000C4 are high purity, multi-wall carbon nanotubes that are designed to provide mechanical, electrical, and thermal properties in final products where a high strength to weight ratio is required. This product has a carbon purity of ≥90.0-98.0% and is commonly applied in coatings and automotive/marine applications. 收起 | |
| ONEX MW 1001 | Glonatech S.A. | ONEX MW 1001 is a carboxyl functionalized multi-wall carbon nanotube that is designed to provide high dispersibility in a wide range of organic solvents that are incorporated into plastics and resins. Common applications of this product include marine coa...展开 ONEX MW 1001 is a carboxyl functionalized multi-wall carbon nanotube that is designed to provide high dispersibility in a wide range of organic solvents that are incorporated into plastics and resins. Common applications of this product include marine coatings and adhesives. 收起 | |
| ONEX MW 1002 | Glonatech S.A. | ONEX MW 1002 is a phenol functionalized multi-wall carbon nanotube that is designed to provide high dispersibility in a wide range of organic solvents that are incorporated into plastics and resins. Common applications of this product include marine coati...展开 ONEX MW 1002 is a phenol functionalized multi-wall carbon nanotube that is designed to provide high dispersibility in a wide range of organic solvents that are incorporated into plastics and resins. Common applications of this product include marine coatings and adhesives. 收起 | |
| ONEX MW 1003 | Glonatech S.A. | ONEX MW 1003 is a amino functionalized multi-wall carbon nanotube that is designed to provide high dispersibility in a wide range of organic solvents that are incorporated into plastics and resins. Common applications of this product include marine coatin...展开 ONEX MW 1003 is a amino functionalized multi-wall carbon nanotube that is designed to provide high dispersibility in a wide range of organic solvents that are incorporated into plastics and resins. Common applications of this product include marine coatings and adhesives. 收起 | |
| PLIOLITE® AC80 | Synthomer | PLIOLITE® AC80, often used in combination with PLIOLITE® AC4 or PLIOLITE® AC5G, forms though abrasion and chemically resistant films that have excellent adhesion, UV resistance and exterior weathering properties. Newtonian resin for exterior masonry coati...展开 PLIOLITE® AC80, often used in combination with PLIOLITE® AC4 or PLIOLITE® AC5G, forms though abrasion and chemically resistant films that have excellent adhesion, UV resistance and exterior weathering properties. Newtonian resin for exterior masonry coatings, anticarbonation, metal protective and intumescent coatings. 收起 | |
| POLYFOX™ PF-136A | Synthomer | POLYFOX™ PF-136A is an anionic fluorinated (CF3) polyether diammonium sulfate for aqueous formulations. POLYFOX™ PF-136A wetting, flow and leveling agent is suitable for use in a wide variety of aqueous coating, floor finish, and ink applications. | |
| POLYFOX™ PF-154N | Synthomer | POLYFOX™ PF-154N is a 25 % active Nonionic fluorinated (C2F5) polyether ethoxylated. POLYFOX™ PF-154N wetting, flow and leveling agent is suitable for use in a wide variety of aqueous coating, ink, and electronics applications. | |
| POLYFOX™ PF-156A | Synthomer | POLYFOX™ PF-156A is an anionic fluorinated (C2F5) polyether diammonium disulfate for aqueous formulations. POLYFOX™ PF-156A wetting, flow and leveling agent is suitable for use in a wide variety of aqueous coating, floor finish, and ink applications. | |
| POLYFOX™ PF-159 | Synthomer | POLYFOX™ PF-159 is a 100 % active Nonionic fluorinated (C2F5) polyether ethoxylated. POLYFOX™ PF-159 highly efficient wetting, flow and leveling agent is suitable for use in a broad variety of aqueous, solvent, 100% solid coating, ink, and adhesive applic...展开 POLYFOX™ PF-159 is a 100 % active Nonionic fluorinated (C2F5) polyether ethoxylated. POLYFOX™ PF-159 highly efficient wetting, flow and leveling agent is suitable for use in a broad variety of aqueous, solvent, 100% solid coating, ink, and adhesive applications. 收起 | |
| POLYFOX™ PF-2002 | Synthomer | POLYFOX™ PF-2002 is an anionic fluorinated (C2F5) polyether diammonium disulfate for aqueous formulations. POLYFOX™ PF-2002 wetting, flow and leveling agent is designed for US DfE compliant floor finish applications. | |
| POLYFOX™ PF-2003 | Synthomer | POLYFOX™ PF-2003 is an anionic fluorinated (CF3) polyether diammonium disulfate for aqueous formulations. POLYFOX™ PF-2003 wetting, flow and leveling agent is designed for US DfE compliant floor finish applications. | |
| POLYFOX™ PF-6320 | Synthomer | POLYFOX™ PF-6320 is a solvent soluble diol functional fluorinated (CF3) polyether diol terminated. POLYFOX™ PF-6320 wetting, flow and leveling agent or reactive intermediate is suitable for solvent based industrial and maintenance coatings, adhesives, ele...展开 POLYFOX™ PF-6320 is a solvent soluble diol functional fluorinated (CF3) polyether diol terminated. POLYFOX™ PF-6320 wetting, flow and leveling agent or reactive intermediate is suitable for solvent based industrial and maintenance coatings, adhesives, electronics, and lubricants. 收起 | |
| POLYFOX™ PF-636 | Synthomer | POLYFOX™ PF-636 is a solvent soluble diol functional fluorinated (CF3) polyether diol terminated. POLYFOX™ PF-636 wetting, flow and leveling agent or reactive intermediate is suitable for solvent based industrial and maintenance coatings, adhesives, elect...展开 POLYFOX™ PF-636 is a solvent soluble diol functional fluorinated (CF3) polyether diol terminated. POLYFOX™ PF-636 wetting, flow and leveling agent or reactive intermediate is suitable for solvent based industrial and maintenance coatings, adhesives, electronics, and lubricants. 收起 | |
| POLYFOX™ PF-652-NF | Synthomer | POLYFOX™ PF-652-NF is a 50% active solvent soluble fluorinated (C2F5) ethoxylate A-B-A tri-block copolymer. POLYFOX™ PF-652-NF wetting, flow and leveling agent or reactive intermediate is suitable for solvent based industrial and maintenance coatings, adh...展开 POLYFOX™ PF-652-NF is a 50% active solvent soluble fluorinated (C2F5) ethoxylate A-B-A tri-block copolymer. POLYFOX™ PF-652-NF wetting, flow and leveling agent or reactive intermediate is suitable for solvent based industrial and maintenance coatings, adhesives, and litho plate coatings. 收起 | |
| POLYFOX™ PF-6520 | Synthomer | POLYFOX™ PF-6520 is a solvent soluble diol functional fluorinated (C2F5) polyether diol terminated. POLYFOX™ PF-6520 wetting, flow and leveling agent or reactive intermediate is suitable for solvent based industrial and maintenance coatings, adhesives, el...展开 POLYFOX™ PF-6520 is a solvent soluble diol functional fluorinated (C2F5) polyether diol terminated. POLYFOX™ PF-6520 wetting, flow and leveling agent or reactive intermediate is suitable for solvent based industrial and maintenance coatings, adhesives, electronics, and lubricants. 收起 | |
| POLYFOX™ PF-656 | Synthomer | POLYFOX™ PF-656 is a solvent soluble diol functional fluorinated (C2F5) polyether diol terminated. POLYFOX™ PF-656 wetting, flow and leveling agent or reactive intermediate is suitable for solvent based industrial and maintenance coatings, adhesives, elec...展开 POLYFOX™ PF-656 is a solvent soluble diol functional fluorinated (C2F5) polyether diol terminated. POLYFOX™ PF-656 wetting, flow and leveling agent or reactive intermediate is suitable for solvent based industrial and maintenance coatings, adhesives, electronics, and lubricants. 收起 | |
| ZOLDINE® MS-PLUS | ANGUS Chemical Company 安格斯化学公司 | 快速反应、低黏度呃唑烷基湿气净化剂，用于聚氨酯涂料、密封剂和弹性体。 |
