| Barium Stearate | Weifang Jahwa Chemical Co., Ltd. (Weifang Fengtai New Material Co., Ltd.) | Barium Stearate is a white powder that has a barium content of 20%. This product is often used as a flatting and sanding agent in lacquers, coatings and inks. | |
| Benzidine Yellow 10G | Brill International Trade (Tianjin) Co., Ltd. | Benzidine Yellow 10G is an organic pigment with a greenish yellow shade. It has the chemical family of Disazo, a molecular weight of 754.49, a density of 1.6, and a heat resistance of 180°C. Its main application is in industrial paint, although it can als...展开 Benzidine Yellow 10G is an organic pigment with a greenish yellow shade. It has the chemical family of Disazo, a molecular weight of 754.49, a density of 1.6, and a heat resistance of 180°C. Its main application is in industrial paint, although it can also be used in plastic. 收起 | |
| Benzidine Yellow DHG | Brill International Trade (Tianjin) Co., Ltd. | Benzidine Yellow DHG is an organic pigment with a bright yellow shade. It has the chemical family of Disazo, a molecular weight of 629.49, a density of 1.5, and a heat resistance of 180°C. Its main application is in offset ink, although it can also be use...展开 Benzidine Yellow DHG is an organic pigment with a bright yellow shade. It has the chemical family of Disazo, a molecular weight of 629.49, a density of 1.5, and a heat resistance of 180°C. Its main application is in offset ink, although it can also be used in textile printing. 收起 | |
| Benzidine Yellow G | Brill International Trade (Tianjin) Co., Ltd. | Benzidine Yellow G is an organic pigment with a reddish yellow, semitransparent, shade. It has the chemical family of Disazo, a molecular weight of 629.49, a density of 1.5, and a heat resistance of 180°C. Its main applications are in plastics and offset ...展开 Benzidine Yellow G is an organic pigment with a reddish yellow, semitransparent, shade. It has the chemical family of Disazo, a molecular weight of 629.49, a density of 1.5, and a heat resistance of 180°C. Its main applications are in plastics and offset ink, although it can also be used in textile printing and water-based ink. 收起 | |
| Benzidine Yellow G-A | Brill International Trade (Tianjin) Co., Ltd. | Benzidine Yellow G-A is an organic pigment with a reddish yellow shade. It has the chemical family of Disazo, a molecular weight of 629.49, a density of 1.5, and a heat resistance of 180°C. Its main application is in offset ink, although it can also be us...展开 Benzidine Yellow G-A is an organic pigment with a reddish yellow shade. It has the chemical family of Disazo, a molecular weight of 629.49, a density of 1.5, and a heat resistance of 180°C. Its main application is in offset ink, although it can also be used in textile printing, plastic, and water-based ink. 收起 | |
| Benzidine Yellow G-B | Brill International Trade (Tianjin) Co., Ltd. | Benzidine Yellow G-B is an organic pigment with a greenish yellow, semitransparent, shade. It has the chemical family of Disazo, a molecular weight of 629.49, a density of 1.5, and a heat resistance of 180°C. Its main applications are in plastics and offs...展开 Benzidine Yellow G-B is an organic pigment with a greenish yellow, semitransparent, shade. It has the chemical family of Disazo, a molecular weight of 629.49, a density of 1.5, and a heat resistance of 180°C. Its main applications are in plastics and offset ink, although it can also be used in textile printing and water-based ink. 收起 | |
| Benzidine Yellow H121 | Brill International Trade (Tianjin) Co., Ltd. | Benzidine Yellow H121 is an organic pigment with a bright yellow shade. It has the chemical family of Disazo, a molecular weight of 629.49, a density of 1.5, and a heat resistance of 180°C. Its main applications are in NC and PA ink, although it can also ...展开 Benzidine Yellow H121 is an organic pigment with a bright yellow shade. It has the chemical family of Disazo, a molecular weight of 629.49, a density of 1.5, and a heat resistance of 180°C. Its main applications are in NC and PA ink, although it can also be used in toluene base ink and PP ink. 收起 | |
| Bronze Red C | Brill International Trade (Tianjin) Co., Ltd. | Bronze Red C is an organic pigment with a yellowish red shade. It has the chemical family of Mono Azo, a molecular weight of 888.98, a density of 1.8, and a heat resistance of 180°C. Its main application is in offset ink, although it can also be used in p...展开 Bronze Red C is an organic pigment with a yellowish red shade. It has the chemical family of Mono Azo, a molecular weight of 888.98, a density of 1.8, and a heat resistance of 180°C. Its main application is in offset ink, although it can also be used in plastic and water-based ink. 收起 | |
| Bronze Red C-P | Brill International Trade (Tianjin) Co., Ltd. | Bronze Red C-P is an organic pigment with a yellowish red shade. It has the chemical family of Mono Azo, a molecular weight of 888.98, a density of 1.8, and a heat resistance of 230°C. Its main application is in plastic, although it can also be used in of...展开 Bronze Red C-P is an organic pigment with a yellowish red shade. It has the chemical family of Mono Azo, a molecular weight of 888.98, a density of 1.8, and a heat resistance of 230°C. Its main application is in plastic, although it can also be used in offset ink. 收起 | |
| Bronze Red C-S | Brill International Trade (Tianjin) Co., Ltd. | Bronze Red C-S is an organic pigment with a yellowish red shade. It has the chemical family of Mono Azo, a molecular weight of 888.98, a density of 1.8, and a heat resistance of 180°C. Its main application is in NC ink, although it can also be used in PP,...展开 Bronze Red C-S is an organic pigment with a yellowish red shade. It has the chemical family of Mono Azo, a molecular weight of 888.98, a density of 1.8, and a heat resistance of 180°C. Its main application is in NC ink, although it can also be used in PP, PA, and offset ink. 收起 | |
| Bronze Red C-W | Brill International Trade (Tianjin) Co., Ltd. | Bronze Red C-W is an organic pigment with a yellowish red shade. It has the chemical family of Mono Azo, a molecular weight of 888.98, a density of 1.8, and a heat resistance of 180°C. Its main application is in water-based ink, although it can also be us...展开 Bronze Red C-W is an organic pigment with a yellowish red shade. It has the chemical family of Mono Azo, a molecular weight of 888.98, a density of 1.8, and a heat resistance of 180°C. Its main application is in water-based ink, although it can also be used in offset ink. 收起 | |
| Cinilex® DPP Orange SJ1C | CINIC Chemicals (Shanghai) Co., Ltd. | Cinilex® DPP Orange SJ1C is a highly opaque, high color strength, and saturated orange pigment. This product can provide high opacity, better flow, longer drying times, and high color strength. It is most commonly used in decorative, industrial, and selec...展开 Cinilex® DPP Orange SJ1C is a highly opaque, high color strength, and saturated orange pigment. This product can provide high opacity, better flow, longer drying times, and high color strength. It is most commonly used in decorative, industrial, and selected powder coating applications. 收起 | |
| Cinilex® DPP Red SR1C | CINIC Chemicals (Shanghai) Co., Ltd. | Cinilex® DPP Red SR1C is an opaque and highly weather resistant mid shade red organic pigment. This product can provide good chemical and solvent resistance and improve weather stability. It is most commonly used in architectural powder coating, coil coat...展开 Cinilex® DPP Red SR1C is an opaque and highly weather resistant mid shade red organic pigment. This product can provide good chemical and solvent resistance and improve weather stability. It is most commonly used in architectural powder coating, coil coating, baking paints, water-based paints, and industrial coating applications. 收起 | |
| Cinilex® DPP Red SR2P | CINIC Chemicals (Shanghai) Co., Ltd. | Cinilex® DPP Red SR2P is a high strength, highly resistant mid shade red organic pigment. This product can improve overpainting resistance and heat stability of the coatings. It is most commonly used in water based decorative coatings, powder coatings, an...展开 Cinilex® DPP Red SR2P is a high strength, highly resistant mid shade red organic pigment. This product can improve overpainting resistance and heat stability of the coatings. It is most commonly used in water based decorative coatings, powder coatings, and industrial coating applications. 收起 | |
| Cinilex® DPP Red ST | CINIC Chemicals (Shanghai) Co., Ltd. | Cinilex® DPP Red ST is an extremely transparent and saturated, high strength DPP based mid shade red organic pigment. This product can be used in conjunction with mica and aluminium pigments. It is most commonly used in car refinish applications, baking p...展开 Cinilex® DPP Red ST is an extremely transparent and saturated, high strength DPP based mid shade red organic pigment. This product can be used in conjunction with mica and aluminium pigments. It is most commonly used in car refinish applications, baking paints, nitrocellulose paints, and water-based paints. 收起 | |
| Cinilex® DPP Rubine SR5H | CINIC Chemicals (Shanghai) Co., Ltd. | Cinilex® DPP Rubine SR5H is a highly opaque, bluish red pigment. This product can provide outstanding light, weather, heat, overpainting and solvent resistance. It is most commonly used in baking paints, acid cured paints, water based paints, and coating ...展开 Cinilex® DPP Rubine SR5H is a highly opaque, bluish red pigment. This product can provide outstanding light, weather, heat, overpainting and solvent resistance. It is most commonly used in baking paints, acid cured paints, water based paints, and coating applications. 收起 | |
| Cinilex® DPP Rubine SR6T | CINIC Chemicals (Shanghai) Co., Ltd. | Cinilex® DPP Rubine SR6T is a transparent and saturated, highly weather resistant, DPP based blue shade red organic pigment. This product can be used in conjunction with mica and aluminium pigments. It is most commonly used in automotive OEM, car refinish...展开 Cinilex® DPP Rubine SR6T is a transparent and saturated, highly weather resistant, DPP based blue shade red organic pigment. This product can be used in conjunction with mica and aluminium pigments. It is most commonly used in automotive OEM, car refinish and commercial transportation applications. 收起 | |
| Cinilex® Red SR3C | CINIC Chemicals (Shanghai) Co., Ltd. | Cinilex® Red SR3C is a highly transparent, bluish red pigment. This product is most commonly used in automotive OEM, car refinish, and powder coating applications. | |
| Cinilex® Red SR4C | CINIC Chemicals (Shanghai) Co., Ltd. | Cinilex® Red SR4C is a highly transparent blush red pigment. This product can be used in conjunction with pearlescent and mica pigments. It is most commonly used in industrial coating and motorcycle paint applications. | |
| Cinilex® Yellow SY1H | CINIC Chemicals (Shanghai) Co., Ltd. | Cinilex® Yellow SY1H is a weather resistant, high performance, red shade organic yellow pigment. This product maintains its outstanding performance in highly reduced shades with titanium dioxide or other inorganic pigments. It is most commonly used in ind...展开 Cinilex® Yellow SY1H is a weather resistant, high performance, red shade organic yellow pigment. This product maintains its outstanding performance in highly reduced shades with titanium dioxide or other inorganic pigments. It is most commonly used in industrial, powder, decorative, automotive, and coil coating applications. 收起 | |
| Cinilex® Yellow SY2T | CINIC Chemicals (Shanghai) Co., Ltd. | Cinilex® Yellow SY2T is a transparent, weather resistant, isoindolinone based red shade yellow organic pigment. This product can be used in conjunction with mica and aluminium pigments. It is most commonly used in automotive OEM and car refinish applicati...展开 Cinilex® Yellow SY2T is a transparent, weather resistant, isoindolinone based red shade yellow organic pigment. This product can be used in conjunction with mica and aluminium pigments. It is most commonly used in automotive OEM and car refinish applications. 收起 | |
| Coated Deep Chrome Yellow QS3000 | Brill International Trade (Tianjin) Co., Ltd. | Coated Deep Chrome Yellow QS3000 is an inorganic pigment used in paints. It has oil absorption of 30 g/100g or less, a water soluble matter of 1% or less, and a PH of 6 to 8. | |
| Coated Light Chrome Yellow QS1500 | Brill International Trade (Tianjin) Co., Ltd. | Coated Light Chrome Yellow QS1500 is an inorganic pigment used in paints. It has oil absorption of 32 g/100g or less, a water soluble matter of 1% or less, and a PH of 6 to 8. | |
| Coated medium Chrome Yellow QS2900 | Brill International Trade (Tianjin) Co., Ltd. | Coated medium Chrome Yellow QS2900 is an inorganic pigment used in paints. It has oil absorption of 32 g/100g or less, a water soluble matter of 1% or less, and a PH of 6 to 8. | |
| Coated medium Chrome Yellow QS2901 | Brill International Trade (Tianjin) Co., Ltd. | Coated medium Chrome Yellow QS2901 is an inorganic pigment used in paints. It has oil absorption of 32 g/100g or less, a water soluble matter of 1% or less, and a PH of 6 to 8. | |
| Coated Medium Chrome Yellow QS2920 | Brill International Trade (Tianjin) Co., Ltd. | Coated Medium Chrome Yellow QS2920 is an inorganic pigment used in paints. It has oil absorption of 26 g/100g or less, a water soluble matter of 1% or less, and a PH of 6 to 8. | |
| Coated Molybdate Orange QS7000 | Brill International Trade (Tianjin) Co., Ltd. | Coated Molybdate Orange QS7000 is an inorganic pigment used in paint. It has oil absorption of 32 g/100g or less, a water soluble matter of 1% or less, and a PH of 6 to 8. | |
| Coated Molybdate Orange QS8000 | Brill International Trade (Tianjin) Co., Ltd. | Coated Molybdate Orange QS8000 is an inorganic pigment used in paint. It has oil absorption of 32 g/100g or less, a water soluble matter of 1% or less, and a PH of 6 to 8. | |
| Coated orange Chrome Yellow QS3500 | Brill International Trade (Tianjin) Co., Ltd. | Coated orange Chrome Yellow QS3500 is an inorganic pigment used in paints. It has oil absorption of 25 g/100g or less, a water soluble matter of 1% or less, and a PH of 6 to 8. | |
| Coattun Q.-2500+1200 | Kaltun Mining Co. | Coattun Q.-2500+1200 is a high quality quartz that is white in color and suitable for use in the coating industry. This product has a hardness of 7mohs and a density of 2.65g/cm3. | |
| Coattun Q.-300+100 | Kaltun Mining Co. | Coattun Q.-300+100 is a high quality quartz that is white in color and suitable for use in the coating industry. This product has a hardness of 7mohs and a density of 2.65g/cm3. | |
| Coattun Q.-4000+2500 | Kaltun Mining Co. | Coattun Q.-4000+2500 is a high quality quartz that is white in color and suitable for use in the coating industry. This product has a hardness of 7mohs and a density of 2.65g/cm3. | |
| Coattun Q.-500+100 | Kaltun Mining Co. | Coattun Q.-500+100 is a high quality quartz that is white in color and suitable for use in the coating industry. This product has a hardness of 7mohs and a density of 2.65g/cm3. | |
| Coattun Q.-700+300 | Kaltun Mining Co. | Coattun Q.-700+300 is a high quality quartz that is white in color and suitable for use in the coating industry. This product has a hardness of 7mohs and a density of 2.65g/cm3. | |
| Coattun Q.15 | Kaltun Mining Co. | Coattun Q.15 is a high quality quartz that is white in color and suitable for use in the coating industry. This product has an oil absorption of 26g/100g and a density of 2.65g/cm3. | |
| Coattun Q.3 | Kaltun Mining Co. | Coattun Q.3 is a high quality quartz that is white in color and suitable for use in the coating industry. This product has an oil absorption of 33g/100g and a density of 2.65g/cm3. | |
| Coattun Q.30 | Kaltun Mining Co. | Coattun Q.30 is a high quality quartz that is white in color and suitable for use in the coating industry. This product has an oil absorption of 24g/100g and a density of 2.65g/cm3. | |
| Coattun Q.40 | Kaltun Mining Co. | Coattun Q.40 is a high quality quartz that is white in color and suitable for use in the coating industry. This product has an oil absorption of 21g/100g and a density of 2.65g/cm3. | |
| Coattun Q.5 | Kaltun Mining Co. | Coattun Q.5 is a high quality quartz that is white in color and suitable for use in the coating industry. This product has an oil absorption of 31g/100g and a density of 2.65g/cm3. | |
| Coattun Q.65 | Kaltun Mining Co. | Coattun Q.65 is a high quality quartz that is white in color and suitable for use in the coating industry. This product has a hardness of 7mohs and a density of 2.65g/cm3. | |
| Coattun Q.8 | Kaltun Mining Co. | Coattun Q.8 is a high quality quartz that is white in color and suitable for use in the coating industry. This product has an oil absorption of 28g/100g and a density of 2.65g/cm3. | |
| Coattun SMW.100 | Kaltun Mining Co. | Coattun SMW.100 is a high quality mica that is white in color and suitable for use in the coating industry. This product has an oil absorption of 67g/100g and a density of 2.85g/cm3. | |
| Coattun SMW.115 | Kaltun Mining Co. | Coattun SMW.115 is a high quality mica that is white in color and suitable for use in the coating industry. This product has an oil absorption of 75g/100g and a density of 2.85g/cm3. | |
| Coattun SMW.1200 | Kaltun Mining Co. | Coattun SMW.1200 is a high quality mica that is white in color and suitable for use in the coating industry. This product has a hardness of 2.5mohs and a density of 2.85 g/cm3. | |
| Coattun SMW.125 | Kaltun Mining Co. | Coattun SMW.125 is a high quality mica that is white in color and suitable for use in the coating industry. This product has an oil absorption of 73g/100g and a density of 2.85g/cm3. | |
| Coattun SMW.145 | Kaltun Mining Co. | Coattun SMW.145 is a high quality mica that is white in color and suitable for use in the coating industry. This product has an oil absorption of 69g/100g and a density of 2.85g/cm3. | |
| Coattun SMW.215 | Kaltun Mining Co. | Coattun SMW.215 is a high quality mica that is white in color and suitable for use in the coating industry. This product has an oil absorption of 72g/100g and a density of 2.85g/cm3. | |
| Coattun SMW.225 | Kaltun Mining Co. | Coattun SMW.225 is a high quality mica that is white in color and suitable for use in the coating industry. This product has an oil absorption of 70g/100g and a density of 2.85g/cm3. | |
| Coattun SMW.300 | Kaltun Mining Co. | Coattun SMW.300 is a high quality mica that is white in color and suitable for use in the coating industry. This product has a hardness of 2.5mohs and a density of 2.85g/cm3. | |
| Coattun SMW.375 | Kaltun Mining Co. | Coattun SMW.375 is a high quality mica that is white in color and suitable for use in the coating industry. This product has an oil absorption of 66g/100g and a density of 2.85g/cm3. | |
| Coattun SMW.390 | Kaltun Mining Co. | Coattun SMW.390 is a high quality mica that is white in color and suitable for use in the coating industry. This product has an oil absorption of 68g/100g and a density of 2.85g/cm3. | |
| Coattun S.PR.C150 | Kaltun Mining Co. | Coattun S.PR.C150 is a sodium feldspar that is white in color and suitable for use in the coating industry. This product has a hardness of 6mohs and a density of 2.6g/cm3. | |
| Coattun S.PR.C25 | Kaltun Mining Co. | Coattun S.PR.C25 is a sodium feldspar that is white in color and suitable for use in the coating industry. This product has an oil absorption of 27g/100g and a density of 2.60g/cm3. | |
| Coattun S.PR.C3 | Kaltun Mining Co. | Coattun S.PR.C3 is a sodium feldspar that is white in color and suitable for use in the coating industry. This product has an oil absorption of 37g/100g and a density of 2.60g/cm3. | |
| Coattun S.PR.C30 | Kaltun Mining Co. | Coattun S.PR.C30 is a sodium feldspar that is white in color and suitable for use in the coating industry. This product has an oil absorption of 25g/100g and a density of 2.60g/cm3. | |
| Coattun S.PR.C300 | Kaltun Mining Co. | Coattun S.PR.C300 is a sodium feldspar that is white in color and suitable for use in the coating industry. This product has a hardness of 6mohs and a density of 2.60g/cm3. | |
| Coattun S.PR.C5 | Kaltun Mining Co. | Coattun S.PR.C5 is a sodium feldspar that is white in color and suitable for use in the coating industry. This product has an oil absorption of 31g/100g and a density of 2.60g/cm3. | |
| Coattun S.PR.C50 | Kaltun Mining Co. | Coattun S.PR.C50 is a sodium feldspar that is white in color and suitable for use in the coating industry. This product has an oil absorption of 22g/100g and a density of 2.60g/cm3. | |
| Deep Chrome Yellow 124 | Brill International Trade (Tianjin) Co., Ltd. | Deep Chrome Yellow 124 is an inorganic pigment used in inks and paints. It has oil absorption of 20 g/100g or less, a water soluble matter of 1% or less, and a PH of 4 to 8. | |
| Deep Chrome Yellow 124GQ | Brill International Trade (Tianjin) Co., Ltd. | Deep Chrome Yellow 124GQ is an inorganic pigment used in inks and paints. It has oil absorption of 20 g/100g or less, a water soluble matter of 1% or less, and a PH of 4 to 8. | |
| ECOPOL-518P | Economy Polymers & Chemicals | ECOPOL-518P is a chemically modified guar designed to provide thixotropic, shear-thinning viscosity over a broad pH range. This product appears as a yellow powder and is intended for use as a thickening agent in aqueous emulsion paint systems. | |
| ECOPOL-PP18S | Economy Polymers & Chemicals | ECOPOL-PP18S is a chemically modified guar designed to provide thixotropic, shear-thinning viscosity over a broad pH range. This product appears as a yellow powder and is intended for use as a thickening agent in aqueous emulsion paint systems. | |
| ECOPOL-PP400S | Economy Polymers & Chemicals | ECOPOL-PP400S is a chemically modified guar designed to provide thixotropic, shear-thinning viscosity over a broad pH range. This product is intended for use as a thickening agent in aqueous emulsion paint systems. | |
| ECOPOL-PP518S | Economy Polymers & Chemicals | ECOPOL-PP518S is a chemically modified guar designed to provide thixotropic, shear-thinning viscosity over a broad pH range. This product is intended for use as a thickening agent in aqueous emulsion paint systems. | |
| Epoxy Resin E-10 | Anhui Shanfu New Material Technology Co., Ltd. | Epoxy Resin E-10 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a light yellow solid granular powder that has good mechanical and anti-corrosive properties. It can be used in paints and powder coatings. | |
| Epoxy Resin E-12 | Anhui Shanfu New Material Technology Co., Ltd. | Epoxy Resin E-12 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a light yellow, solid granular powder that has good electrostatic spraying performance, chemical resistance, and anti-corrosive properties. It can be used in epoxy polye...展开 Epoxy Resin E-12 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a light yellow, solid granular powder that has good electrostatic spraying performance, chemical resistance, and anti-corrosive properties. It can be used in epoxy polyester powder coatings, or mixed with an amine curing agent for use in anti-corrosion and insulation coatings. 收起 | |
| Epoxy Resin E-14 | Anhui Shanfu New Material Technology Co., Ltd. | Epoxy Resin E-14 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a light yellow, solid granular powder that has good electrostatic spraying performance, chemical resistance, and anti-corrosive properties. It can be used in top-grade e...展开 Epoxy Resin E-14 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a light yellow, solid granular powder that has good electrostatic spraying performance, chemical resistance, and anti-corrosive properties. It can be used in top-grade epoxy polyester powder coatings, electrophoretic paints, and anti-corrosion coatings. 收起 | |
| Epoxy Resin E-20 | Anhui Shanfu New Material Technology Co., Ltd. | Epoxy Resin E-20 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a light yellow, solid granular powder that has good bending performance, chemical resistance, solvent resistance, and strong adhesion properties. It can be used in anti-...展开 Epoxy Resin E-20 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a light yellow, solid granular powder that has good bending performance, chemical resistance, solvent resistance, and strong adhesion properties. It can be used in anti-corrosion coatings, zinc powder primers, floor coatings, decorative coatings and varnishes. 收起 | |
| Epoxy Resin SF801 | Anhui Shanfu New Material Technology Co., Ltd. | Epoxy Resin SF801 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a transparent granular powder that is curable at room temperature or higher temperatures. It can be used in anti-corrosion coatings, electrophoretic paint, floor coatin...展开 Epoxy Resin SF801 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a transparent granular powder that is curable at room temperature or higher temperatures. It can be used in anti-corrosion coatings, electrophoretic paint, floor coatings, decorative coatings, and powder coatings. It has an epoxy equivalent of 450-520 g/eq and a softening point of 65-75°C. 收起 | |
| Epoxy Resin SF801A | Anhui Shanfu New Material Technology Co., Ltd. | Epoxy Resin SF801A is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a transparent granular powder that is curable at room temperature or higher temperatures. It can be used in anti-corrosion coatings, electrophoretic paint, floor coati...展开 Epoxy Resin SF801A is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a transparent granular powder that is curable at room temperature or higher temperatures. It can be used in anti-corrosion coatings, electrophoretic paint, floor coatings, decorative coatings, and powder coatings. It has an epoxy equivalent of 530-570 g/eq and a softening point of 65-75°C. 收起 | |
| Epoxy Resin SF808 | Anhui Shanfu New Material Technology Co., Ltd. | Epoxy Resin SF808 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a transparent, solid granular powder that has good electrostatic spraying performance and plate leveling capacity. It can be used in top-grade epoxy polyester powder co...展开 Epoxy Resin SF808 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a transparent, solid granular powder that has good electrostatic spraying performance and plate leveling capacity. It can be used in top-grade epoxy polyester powder coatings, electrophoretic paints, and anti-corrosion coatings. 收起 | |
| Epoxy Resin SF818 | Anhui Shanfu New Material Technology Co., Ltd. | Epoxy Resin SF818 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a transparent, solid granular powder that has good mechanical performance and electrostatic spraying performance. It can be used in electrophoretic paints, top-grade ep...展开 Epoxy Resin SF818 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a transparent, solid granular powder that has good mechanical performance and electrostatic spraying performance. It can be used in electrophoretic paints, top-grade epoxy poleyster powder coatings, and anti-corrosion coatings. 收起 | |
| Epoxy Resin SF828 | Anhui Shanfu New Material Technology Co., Ltd. | Epoxy Resin SF828 is a MMW solid Bisphenol-A type epoxy resin. This product appears as a transparent, solid granular powder that has good electrostatic spraying performance, chemical resistance, and high impact strength. It can be used in electrophoretic ...展开 Epoxy Resin SF828 is a MMW solid Bisphenol-A type epoxy resin. This product appears as a transparent, solid granular powder that has good electrostatic spraying performance, chemical resistance, and high impact strength. It can be used in electrophoretic paints, top-grade epoxy polyester powder coatings, and anti-corrosion coatings. 收起 | |
| Epoxy Resin SF838 | Anhui Shanfu New Material Technology Co., Ltd. | Epoxy Resin SF838 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a transparent, solid granular powder that has good chemical resistance, electrostatic spraying performance, and anti-corrosive properties. It can be used in electrophor...展开 Epoxy Resin SF838 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a transparent, solid granular powder that has good chemical resistance, electrostatic spraying performance, and anti-corrosive properties. It can be used in electrophoretic paints and anti-corrosion coatings. 收起 | |
| ExBar™ 200 | Excalibar Minerals LLC | ExBar™ 200 is a raw mineral material that is manufactured from natural barium sulfate ore. This product is used in many different applications such as paints, adhesives and sealants. It has a median particle size of 15.0u and an oil absorption of 9. | |
| ExBar™ 325 | Excalibar Minerals LLC | ExBar™ 325 is a raw mineral material that is manufactured from natural barium sulfate ore. This product is used in many different applications such as paints, adhesives and sealants. It has a median particle size of 10.0u and an oil absorption of 10. | |
| ExBar™ 400 | Excalibar Minerals LLC | ExBar™ 400 is a raw mineral material that is manufactured from natural barium sulfate ore. This product is used in many different applications such as paints, adhesives and sealants. It has a median particle size of 8.0u and an oil absorption of 12. | |
| ExBar™ W 1 | Excalibar Minerals LLC | ExBar™ W 1 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 1 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 1u and an oil absorption of 15. 收起 | |
| ExBar™ W 2 | Excalibar Minerals LLC | ExBar™ W 2 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 2 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 2u and an oil absorption of 13. 收起 | |
| ExBar™ W 3 | Excalibar Minerals LLC | ExBar™ W 3 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 3 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 3u and an oil absorption of 13. 收起 | |
| ExBar™ W 325 | Excalibar Minerals LLC | ExBar™ W 325 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are pr...展开 ExBar™ W 325 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. 收起 | |
| ExBar™ W 4 | Excalibar Minerals LLC | ExBar™ W 4 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 4 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 4u and an oil absorption of 12. 收起 | |
| ExBar™ W 400 | Excalibar Minerals LLC | ExBar™ W 400 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are pr...展开 ExBar™ W 400 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 8u and an oil absorption of 10. 收起 | |
| ExCal® 100 | Excalibar Minerals LLC | ExCal® 100 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications. | |
| ExCal® 200 | Excalibar Minerals LLC | ExCal® 200 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications. | |
| ExCal® 325 | Excalibar Minerals LLC | ExCal® 325 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications. | |
| ExCal® 400 | Excalibar Minerals LLC | ExCal® 400 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications. | |
| ExCal® CW 100 | Excalibar Minerals LLC | ExCal® CW 100 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand ar...展开 ExCal® CW 100 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand are a standard. 收起 | |
| ExCal® CW 200 | Excalibar Minerals LLC | ExCal® CW 200 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand ar...展开 ExCal® CW 200 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand are a standard. 收起 | |
| ExCal® CW 325 | Excalibar Minerals LLC | ExCal® CW 325 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand ar...展开 ExCal® CW 325 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand are a standard. 收起 | |
| EXOCOAT™ 143 | Axcentive Sarl | EXOCOAT® 143 by Axcentive is a solvent-based organometallic resin (60% solids in Butyl acetate). It is characterized by non-sticky, hydrophobic, and oleophobic properties. Provides strong adhesion to steel, aluminum, glass, and plastics like PMMA and ABS ...展开 EXOCOAT® 143 by Axcentive is a solvent-based organometallic resin (60% solids in Butyl acetate). It is characterized by non-sticky, hydrophobic, and oleophobic properties. Provides strong adhesion to steel, aluminum, glass, and plastics like PMMA and ABS as well as to old coating layers. It covalently bonds with the substrate resulting in a very durable finish. It can be used as a standalone resin or might be formulated with other raw materials like white and colored pigments, organic resins, fillers, and additives. The use of water-based raw materials should be avoided. Durability is a unique feature of EXOCOAT® 143. It can sustain mechanical abrasion, and chemical attack and is UV stable. When applied at a very low layer thickness of 0.5 to 2µm it provides the surface with a protective hard coating that shows durable easy-to-clean, dirt resistance, anti-graffiti, and strong water repellency properties. It is suitable for ambient or force-cured, high-performance industrial coatings such as protective, coil, marine, and automotive. EXOCOAT® 143-based paints may be brushed, rolled, or sprayed by HVLP or airless spray. 收起 | |
| EXOCOAT™ 151A | Axcentive Sarl | EXOCOAT® 151A by Axcentive is a photocatalytic nano-titanium oxide sol with a strong self-cleaning performance. The photocatalytic effect results in effective radical formation which breaks down organic matter like dirt and soil. Airborne particles like V...展开 EXOCOAT® 151A by Axcentive is a photocatalytic nano-titanium oxide sol with a strong self-cleaning performance. The photocatalytic effect results in effective radical formation which breaks down organic matter like dirt and soil. Airborne particles like VOCs, NOx, and biopollution are also eradicated by EXOCOAT® 151A. It can be used as a general air purifier. Though most effective in outdoor light conditions, it is adapted for use under visible light as found in the interior. In all cases, it should be used as a topcoat to ensure its full effect. Glass and walls coated with EXOCOAT® 151A are super hydrophilic enhancing water-sheeting, also called the wash-off effect. It may be used on other flat surfaces such as plastics or coated substrates yet only interior. It dries under room temperature conditions. Spray application is recommended to reach thin monolayers which prove to be more effective. It is listed with EINECS. TSCA, AICS, and CEPA. 收起 | |
| EXOCOAT™ 151B | Axcentive Sarl | EXOCOAT® 151B by Axcentive is a photocatalytic nano-titanium oxide sol with a strong self-cleaning performance. The photocatalytic effect results in effective radical formation which breaks down organic matter like dirt and soil. Airborne particles like V...展开 EXOCOAT® 151B by Axcentive is a photocatalytic nano-titanium oxide sol with a strong self-cleaning performance. The photocatalytic effect results in effective radical formation which breaks down organic matter like dirt and soil. Airborne particles like VOCs, NOx, and biopollution are also eradicated by EXOCOAT® 151B. In all cases, it should be used as a topcoat to ensure its full effect. EXOCOAT® 151B coated walls are super hydrophilic enhancing water-sheeting, also called the wash-off effect. It is targeted for porous substrates like concrete, brickwork, and gypsum. It is not meant for glass substrates. It dries under room temperature conditions. Brush, roller, or Spray application is recommended to reach homogeneous coatings. It is listed with EINECS. TSCA, AICS, and CEPA. 收起 | |
| EXOCOAT™ 161 | Axcentive Sarl | EXOCOAT® 161 by Axcentive is a multipurpose, high-performance coating resin. It is preceramic, as it cures the ceramic layer. Upon curing, it converts to an inorganic highly cross linked layer with excellent barrier properties, high durability, and extre...展开 EXOCOAT® 161 by Axcentive is a multipurpose, high-performance coating resin. It is preceramic, as it cures the ceramic layer. Upon curing, it converts to an inorganic highly cross linked layer with excellent barrier properties, high durability, and extreme hardness (9H). Offers chemical-, scratch-, oxidation resistance, and temperature resistance over 1000°C for prolonged time. It can function as stand-alone resin at a layer thickness of 0.5 to 2 µm to form a durable finish that can be easy to clean. It bonds to substrates such as steel, aluminum, glass, and old coating layers. It can be used as conversion coating replacing Cr(VI). It may be co-formulated with the most frequently used coating ingredients from the group of pigments, fillers, resins, additives, and (co-)solvents and creates colored, super hard, or matte surfaces. EXOCOAT® 161 is highly advised to be used in aprotic solvents. It has a shelf life of 6 months. 收起 | |
| EXOCOAT™ AC | Axcentive Sarl | EXOCOAT® AC by Axcentive is a hybrid sol-gel resin for anti-corrosive conversion coatings in 60% ethanol. It is covalently bonded to the surface and applied directly to metal (iron alloy, galvanized steel, phosphate steel, stainless steel, and aluminum). ...展开 EXOCOAT® AC by Axcentive is a hybrid sol-gel resin for anti-corrosive conversion coatings in 60% ethanol. It is covalently bonded to the surface and applied directly to metal (iron alloy, galvanized steel, phosphate steel, stainless steel, and aluminum). It functions as a replacement for the Cr3+ and Cr6+ based system as used in metal plating and automotive industries. It converts the metal hydroxide surface into a stable, inert covalently bound monolayer. It can also be used as micrometer-thin primers under conventional organic coatings. It can be overcoated by epoxy primer or polyurethane topcoat systems. EXOCOAT® AC is suitable for conventional low & high pressure airless and air-mixing spraying, dipping, rolling, and brushing. It has a shelf life of 12 months. 收起 | |
| EXOCOAT™ ACX-W | Axcentive Sarl | EXOCOAT® ACX-W by Axcentive is a water-dilutable nanoparticle-modified anticorrosive conversion coating that covalently bonds to the surface through nanoparticles. It is applied directly to metals (iron alloy, galvanized steel, phosphate steel, stainless ...展开 EXOCOAT® ACX-W by Axcentive is a water-dilutable nanoparticle-modified anticorrosive conversion coating that covalently bonds to the surface through nanoparticles. It is applied directly to metals (iron alloy, galvanized steel, phosphate steel, stainless steel, and aluminum). It converts the metal hydroxide surface into a stable, inert covalently bound monolayer. It is used as a replacement for chromium-based primers on aluminum and other metals. It can be used as a conversion primer for a coating system based on an epoxy coating and polyurethane topcoat. It may omit toxic chemicals and functions as a replacement for Cr3+ and Cr6+-based systems used in metal plating and aerospace industries. EXOCOAT® ACX-W is applied with conventional low-pressure and high-pressure airless and air-mix spraying, dipping, rolling and brushing. It has a shelf life of 12 months. 收起 | |
| EXOCOAT™ AM | Axcentive Sarl | EXOCOAT® AM by Axcentive is a water-based, doped nano-titanium oxide sol with a strong antimicrobial effect and anatase structure. It prevents the build-up of microbes as the photocatalytic effect results in effective radical formation which breaks down v...展开 EXOCOAT® AM by Axcentive is a water-based, doped nano-titanium oxide sol with a strong antimicrobial effect and anatase structure. It prevents the build-up of microbes as the photocatalytic effect results in effective radical formation which breaks down viruses and bacteria. It eradicates viruses such as influenza, SARS-COV-2, dengue & hepatitis and bacteria such as E. coli, MSRA, streptococcus, listeria, pneumonia, and salmonella. It is activated by light and displays quick drying at room temperature. Spray application is recommended to reach thin monolayers. It exhibits curing at room temperature up to 300°C and super hard particles (1GPa Vickers). It is easy to apply & durable, allowing longer disinfection intervals while preserving hygiene level. It shows non-silver leaching, efficacious even under low light conditions, lower service frequency, and no need for frequent disinfection routine. It is used in the state-of-the-art continuous antimicrobial coating for high-traffic areas. EXOCOAT® AM is suitable for topcoats for any surface inside buildings, stores, hospitals, and vehicles. The shelf life of this product is 9 months. 收起 | |
| EXOCOAT™ Clearview | Axcentive Sarl | EXOCOAT® Clearview by Axcentive is a 1K hybrid sol-gel system in ethanol. It has been designed for water-repellent, easy-to-clean coatings for glass and ceramic substrates. A substrate coated with EXOCOAT® Clearview will turn into a hard, water-repellent ...展开 EXOCOAT® Clearview by Axcentive is a 1K hybrid sol-gel system in ethanol. It has been designed for water-repellent, easy-to-clean coatings for glass and ceramic substrates. A substrate coated with EXOCOAT® Clearview will turn into a hard, water-repellent durable easy-to-clean surface. EXOCOAT® Clearview keeps windscreens clean from raindrops and improves vision drastically, especially in difficult wet road conditions, which can be experienced day and night. Besides, it can be used to make easy-to-clean, water shedding tiles and chrome for example used in kitchens and bathrooms. 收起 | |
| EXOCOAT™ Clearview-2 | Axcentive Sarl | EXOCOAT® Clearview-2 by Axcentive is a 2K hybrid sol-gel in ethanol. It is designed for durable water repellent, easy-to-clean, dirt resistant glass coatings. This solvent-based nanosystem can be applied in coatings for automotive windscreens, or glass ba...展开 EXOCOAT® Clearview-2 by Axcentive is a 2K hybrid sol-gel in ethanol. It is designed for durable water repellent, easy-to-clean, dirt resistant glass coatings. This solvent-based nanosystem can be applied in coatings for automotive windscreens, or glass bathroom doors. It can be applied as such or diluted, in coatings as a monolayer to obtain a very hard and durable hydrophobic surface. EXOCOAT® Clearview-2 keeps windows clean from raindrops and improves vision drastically, especially in difficult wet road conditions, which can be experienced day and night. In bathroom glass, it makes the water run down fast and avoids water spots. 收起 | |
| EXOCOAT™ SH | Axcentive Sarl | EXOCOAT® SH by Axcentive is an inorganic 1K superhydrophobic Sol-Gel system for breathable concrete and masonry sealers. It has extremely high water exclusion properties which helps to produce superhydrophobic coatings. It can be applied on concrete, pave...展开 EXOCOAT® SH by Axcentive is an inorganic 1K superhydrophobic Sol-Gel system for breathable concrete and masonry sealers. It has extremely high water exclusion properties which helps to produce superhydrophobic coatings. It can be applied on concrete, pavement, walls, and stucco to get the so-called Lotus Effect. The sol-gel system deposits superhydrophobic particles on the porous substrate. EXOCOAT® SH will not form a film and as a result, the wall stays breathable. With the contact angle of 145o water droplets bounce back from the surface and will roll down immediately upon touch. Thus, the wall remains dry, and clean and will behave as an efficient barrier against water. 收起 |
