| ACEMATT® 3300 | Evonik Operations GmbH, BL Coating Additives | ACEMATT® 3300是一种气相二氧化硅，是ACEMATT® 消光剂产品家族的一种，具有很多激动人心的优点。ACEMATT® 3300也具有附加的优点，可为柔感涂料提供一种雅致的消光表面，可提升质感，也就是众所周知的柔软触感 | Request Sample |
| ACEMATT® 3400 | Evonik Operations GmbH, BL Coating Additives | ACEMATT® 3400 is a matting agent exhibiting a multitude of exciting benefits. In solvent and waterborne coatings, the surface modification leads to an outstanding suspension behavior. In waterborne systems, there is only a minimum adsorption of associativ...展开 ACEMATT® 3400 is a matting agent exhibiting a multitude of exciting benefits. In solvent and waterborne coatings, the surface modification leads to an outstanding suspension behavior. In waterborne systems, there is only a minimum adsorption of associative thickeners resulting in improved rheology stability. Excellent transparency is obtained making it ideal for clear wood coatings, as observed by the depth of color when applied over colored substrates. 收起 | Request Sample |
| ACEMATT® 3600 | Evonik Operations GmbH, BL Coating Additives | ACEMATT® 3600是一种微颗粒状二氧化硅，作为特别有机聚合物使用，是专门为低光泽的辐射固化涂料而设计的。与传统的二氧化硅消光剂相比，ACEMATT® 3600对UV涂料的粘性影响较小。ACEMATT® 3600还具有高消光效率，在UV涂料系统中出色的透明度和易于加工等其他特点。 | Request Sample |
| ACEMATT® 790 | Evonik Operations GmbH, BL Coating Additives | ACEMATT® 790 as untreated, fine particle sized precipitated silica is distinguished by high matting efficiency and particularly suitable for pigmented coatings systems. | Request Sample |
| ACEMATT® 810 | Evonik Operations GmbH, BL Coating Additives | 赢创的新型消光剂ACEMATT®810：在过去的两年内，由很多客户测试和验证过其高消光效率，ACEMATT®810是赢创消光剂组合中不可或缺的一部分。ACEMATT®810作为未经处理的粗粒沉淀二氧化硅，由于高光效率高而区别于其他产品，并特别适合用于色漆系统。 | Request Sample |
| ACEMATT® HK 125 | Evonik Operations GmbH, BL Coating Additives | ACEMATT®消光剂是高性能二氧化硅，适合各种油漆和涂料应用。ACEMATT® HK 125是一种经济的未经处理的硅土，具有不同种类的粒径分布，适合一般用途 | Request Sample |
| ACEMATT® HK 390 | Evonik Operations GmbH, BL Coating Additives | ACEMATT® HK 390 is an untreated, finer grade matting agent based on precipitated silica. Providing very high compatibility it can be used in a large variety of coatings. The improved orientation in coating systems effectively prevents mottling. | Request Sample |
| ACEMATT® HK 400 | Evonik Operations GmbH, BL Coating Additives | ACEMATT®消光剂是高性能二氧化硅，适合各种油漆和涂料应用。ACEMATT® HK 400是一种通用型未经处理的消光剂。它适合所有不需要有机表面处理的应用 | Request Sample |
| ACEMATT® HK 440 | Evonik Operations GmbH, BL Coating Additives | ACEMATT® HK 440是一种非常高效的未经处理的消光（无光）助剂。ACEMATT® HK 440设计用于需要低光泽的涂料应用例如卷钢涂料、屋顶涂料、醇酸清漆 | Request Sample |
| ACEMATT® HK 520 | Evonik Operations GmbH, BL Coating Additives | ACEMATT® HK 520 is an untreated, medium particle-sized precipitated silica. Providing very high compatibility it can be used in a large variety of coatings. The improved orientation in coating systems effectively prevents mottling. | Request Sample |
| ACEMATT® OK 390 | Evonik Operations GmbH, BL Coating Additives | ACEMATT® OK 390 is a wax-treated, finer-grade matting agent based on precipitated silica. Providing very high compatibility it can be used in a large variety of coatings. | Request Sample |
| ACEMATT® OK 412 | Evonik Operations GmbH, BL Coating Additives | ACEMATT®消光剂是高性能二氧化硅，适合各种油漆和涂料应用。ACEMATT® OK 412是一种有机表面处理的易分散的消光剂，适合一般应用。该消光剂可获取异常杰出的表面特性，以及出色的滑爽效果，也适合有色涂料。由于它具有杰出的悬浮效果，它特别适合用于透明涂料 | Request Sample |
| ACEMATT® OK 500 | Evonik Operations GmbH, BL Coating Additives | ACEMATT®消光剂是高性能二氧化硅，适合各种油漆和涂料应用。ACEMATT® OK 500是一种经有机表面处理的易分散的消光剂，适合一般应用。该消光剂具有异常杰出的表面特性以及出色的滑爽效果，也适合有色涂料。由于它具有杰出的悬浮特性，它尤其适合用于透明涂料 | Request Sample |
| ACEMATT® OK 520 | Evonik Operations GmbH, BL Coating Additives | ACEMATT®消光剂是高性能二氧化硅，适合各种油漆和涂料应用。ACEMATT® OK 520是一种易分散、经有机表面处理的消光剂，适合一般应用。该消光剂具有异常杰出的表面特性以及出色的滑爽效果，也适合有色涂料。由于它具有杰出的悬浮特性，它尤其适合用于透明涂料 | Request Sample |
| ACEMATT® OK 607 | Evonik Operations GmbH, BL Coating Additives | ACEMATT®消光剂是高性能二氧化硅，适合各种油漆和涂料应用。ACEMATT® OK 607是一种易分散、经有机表面处理的消光剂，具有非常低的平均粒径。该消光剂具有异常杰出的表面特性以及出色的滑爽效果，也适合有色涂料。由于它具有杰出的悬浮特性，它尤其适合用于透明涂料 | Request Sample |
| ACEMATT® OK 607 LC | Evonik Operations GmbH, BL Coating Additives | ACEMATT® OK 607 LC is a very fine-grained wax after-treated precipitated silica. It is mainly used as a high-purity filler for e-coats due to its outstanding suspension behaviour and low electrical conductivity. | Request Sample |
| ACEMATT® OK 900 | Evonik Operations GmbH, BL Coating Additives | ACEMATT® OK 900 is a highly efficient, medium particle-sized, wax-treated precipitated silica. It is especially recommended for coil coatings as well as general industrial coatings. | Request Sample |
| ACEMATT® TS 100 | Evonik Operations GmbH, BL Coating Additives | ACEMATT®消光剂是高性能二氧化硅，适合各种油漆和涂料应用。ACEMATT® TS 100是一种热的未经处理的消光剂。ACEMATT® TS 100的特征是它的杰出的消光效率和透明度 | Request Sample |
| ADDID® 900 | Evonik Operations GmbH, BL Coating Additives | 二氨基官能三甲氧基硅烷增粘剂。 | Request Sample |
| ADDID® 911 | Evonik Operations GmbH, BL Coating Additives | ADDID® 911 is an adhesion promoter for solventborne and waterborneprimers and coating formulations. It is based on an epoxy-functional silane. | Request Sample |
| AERODISP® W 7520 | Evonik Operations GmbH, BL Coating Additives | 低粘度AEROSIL®气相二氧化硅水性乳液，具有轻微碱性pH值 | Request Sample |
| AERODISP® W 7520 N | Evonik Operations GmbH, BL Coating Additives | AERODISP® W 7520 N是一种AEROSIL®气相二氧化硅的低粘度水性乳液，具有轻微碱性的pH值 | Request Sample |
| AERODISP® W 7520 NF | Evonik Operations GmbH, BL Coating Additives | AERODISP® W 7520 NF is an aqueous dispersion of a hydrophilic fumed silica with an alkaline pH-value, which is recommended for food contact applications. | Request Sample |
| AERODISP® W 7520 P | Evonik Operations GmbH, BL Coating Additives | AERODISP® W 7520 P is a low viscosity, water-based dispersionof AEROSIL® fumed silica, with a slightly alkaline pH. | Request Sample |
| AERODISP® WF 7620 | Evonik Operations GmbH, BL Coating Additives | AERODISP® WF 7620 is an aqueous dispersion containing 20 weight % active material of a functionalized AEROSIL®. | Request Sample |
| AERODISP® WR 8520 | Evonik Operations GmbH, BL Coating Additives | AERODISP® WR 8520是一种憎水型AEROSIL®的特殊的、纹理的、高填充的乳液。它可轻易有效地改善水性有色涂料和水性透明涂料的增稠和触变性、抗沉降性、颜料稳定效果以及机械性能 | Request Sample |
| AEROSIL® 200 | Evonik Operations GmbH, BL Coating Additives | 一种亲水气相二氧化硅，比表面积为200m2/g。用于油漆、涂料、粘胶和密封剂、印刷油墨、食品和化妆品、电缆复合材料和凝胶、硅树脂橡胶，也用于工厂防护。 | Request Sample |
| AEROSIL® 300 | Evonik Operations GmbH, BL Coating Additives | 一种亲水气相二氧化硅，比表面积为300m2/g。用于油漆、涂料、粘胶和密封剂、印刷油墨、电缆复合材料和凝胶、硅树脂橡胶。 | Request Sample |
| AEROSIL® 380 | Evonik Operations GmbH, BL Coating Additives | 一种亲水气相二氧化硅，比表面积为380m2/g。用于油漆、涂料、粘胶和密封剂、印刷油墨、电缆复合材料和凝胶、硅树脂橡胶。 | Request Sample |
| AEROSIL® 4200 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® 4200 is a hydrophilic fumed silica with a specific 200 m²/g surface area. With this product, rheology and thixotropy control of liquid systems, binders, and polymers is easily possible. It is also used to improve the free flow and anti-caking cha...展开 AEROSIL® 4200 is a hydrophilic fumed silica with a specific 200 m²/g surface area. With this product, rheology and thixotropy control of liquid systems, binders, and polymers is easily possible. It is also used to improve the free flow and anti-caking characteristics of powders as well as an anti-settling, thickening, and anti-sagging agent. 收起 | Request Sample |
| AEROSIL® COK 84 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® COK 84 is a formulated product with highly dispersed fumed aluminium oxide in the ratio of 5:1. | Request Sample |
| AEROSIL® E 805 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® E 805 is a fumed silica after being treated with organosilane. It provides extraordinary rheological properties by keeping brilliant transparency. In addition, it is very easy to disperse. | Request Sample |
| AEROSIL® E 812 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® E 812 is a fumed silica post-treated with organosilane (HMDS) and a high specific surface area combined with exceptional hydrophobicity. In addition, it is very easy to disperse. | Request Sample |
| AEROSIL® E 9200 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® E 9200 is a structure-modified, hydrophobic fumed silica. Enables high loading levels at low viscosities. In addition, it is very easy to disperse. | Request Sample |
| AEROSIL® E 972 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® E 972 is a fumed silica after being treated with DDS (dimethyldichlorosilane). It is a very efficient Rheology Modifier suitable for a broad range of applications while being very easy to disperse. | Request Sample |
| AEROSIL® MOX 80 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® MOX 80是一种含二氧化硅和约1%氧化铝的混合氧化物，通过AEROSIL®工艺制备 | Request Sample |
| AEROSIL® OX 50 | Evonik Operations GmbH, BL Coating Additives | 具有最小比表面积的颗粒热解法氧化物。高化学纯度、独特的低增稠性和聚集性为典型特征。被用于PET膜、牙复合物和制造超纯度的石英玻璃。 | Request Sample |
| AEROSIL® R 106 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® R 106 is a hydrophobic fumed silica surface treated with D4 (octamethylcyclotetrasiloxane). | Request Sample |
| AEROSIL® R 202 | Evonik Operations GmbH, BL Coating Additives | 气相二氧化硅，用聚甲基硅氧烷做后处理。 用于粘胶和密封剂、乙烯环氧树脂和电缆胶衣。 | Request Sample |
| AEROSIL® R 208 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® R 208是一种经聚二甲硅氧烷处理的气相二氧化硅。它显示了良好的增稠性和在复杂极性液体（如环氧基树脂，聚氨酯或乙烯基树脂等）中良好的触变性。它同时有良好的抗流挂性和出色的耐水性。 | Request Sample |
| AEROSIL® R 7200 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® R 7200 is a structure modified fumed silica after treated with methacrylsilane. | Request Sample |
| AEROSIL® R 805 | Evonik Operations GmbH, BL Coating Additives | 气相二氧化硅，在Aerosil® 200基础上用辛基硅烷做后处理。 用于油漆和涂料、粘胶和密封剂，以及环氧复合涂料体系。 | Request Sample |
| AEROSIL® R 812 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® R 812 is a fumed silica after-treated with organosilane (HDMDS) with high specific surface and marked hydrophobia. | Request Sample |
| AEROSIL® R 812 S | Evonik Operations GmbH, BL Coating Additives | 气相二氧化硅，在Aerosil® 300基础上用HMDS做后处理。 用于油漆和涂料、粘胶和密封剂，以及硅树脂橡胶。 | Request Sample |
| AEROSIL® R 816 | Evonik Operations GmbH, BL Coating Additives | 气相二氧化硅， 以Aerosil® 200为基础用十六烷基硅烷做后处理。 用于水性涂料。 | Request Sample |
| AEROSIL® R 8200 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® R 8200 is a structure-modified, highly hydrophobic fumed silica. Due to its low thickening efficiency, high loading levels at low viscosities are achievable. | Request Sample |
| AEROSIL® R 9200 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® R 9200 is a structure modified, hydrophobic fumed silica. | Request Sample |
| AEROSIL® R 972 | Evonik Operations GmbH, BL Coating Additives | 一种憎水气相二氧化硅，基于比表面积为130 m2/g的亲水气相二氧化硅，用二甲基二氯硅烷后处理。 | Request Sample |
| AEROSIL® R 972 V | Evonik Operations GmbH, BL Coating Additives | AEROSIL® R 972 V is a densified hydrophobic fumed silica, after treated with DDS (Dimethyldichlorosilane). Due to the densification it shows a weaker rheological effect than AEROSIL® R 972. | Request Sample |
| AEROSIL® R 974 | Evonik Operations GmbH, BL Coating Additives | 一种憎水气相二氧化硅，基于比表面积为200 m2/g的亲水气相二氧化硅，用二甲基二氯硅烷后处理。 | Request Sample |
| AEROSIL® TT 600 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® TT 600 is a fumed silica characterized by a particularly high degree of agglomeration. The combination of relatively high specific surface area coupled simultaneously with larger primary structures produces a unique profile of properties, which i...展开 AEROSIL® TT 600 is a fumed silica characterized by a particularly high degree of agglomeration. The combination of relatively high specific surface area coupled simultaneously with larger primary structures produces a unique profile of properties, which is different from all other silica grades in the portfolio. For instance, the product is recommended as a matting agent or anti-blocking additive with adsorption properties and high transparency. 收起 | Request Sample |
| AEROXIDE® ALU 130 | Evonik Operations GmbH, BL Coating Additives | AEROXIDE® ALU 130 is a very fine-particle fumed aluminum oxide with a very high specific surface area. The positive surface charge makes it ideal to control the electrostatic charge in powder coatings. | Request Sample |
| AEROXIDE® ALU C | Evonik Operations GmbH, BL Coating Additives | 它是一种火法工艺制成的颗粒非常细的氧化金属，具有高比表面积。由于正电荷的特殊性能，产品具有多种用途。可用于PET-膜、荧光灯和灯泡、粉末涂料和高品质纸张喷墨涂料。 | Request Sample |
| AIRASE® 5100 | Evonik Operations GmbH, BL Coating Additives | AIRASE® 5100 is a highly effective defoamer concentrate based on polyether siloxane technology. Excellent defoaming ability. | Request Sample |
| Airase® 5355 Defoamer | Evonik Operations GmbH, BL Coating Additives | Airase® 5355 Defoamer is a relatively strong proprietary siloxane based defoamer designed to control and quickly eliminate foam without generating surface defects in waterbased pigment grinds, inks, overprint varnishes, adhesives and coatings. It does not...展开 Airase® 5355 Defoamer is a relatively strong proprietary siloxane based defoamer designed to control and quickly eliminate foam without generating surface defects in waterbased pigment grinds, inks, overprint varnishes, adhesives and coatings. It does not contain added mineral oils, hazardous air pollutants (HAPs) or alkyl phenol ethoxylates (APEs). Airase® 5355 Defoamer is especially suited for waterbased applications requiring broad food contact compliances. 收起 | Request Sample |
| Airase® 8070 Deaerator | Evonik Operations GmbH, BL Coating Additives | Airase® 8070 Deaerator is a proprietary, formulated, modified-siloxane deaerator designed to eliminate foam, pinholing, and solvent-popping problems in water-based coatings applied by airless (or air-assisted) spray technologies without generating surface...展开 Airase® 8070 Deaerator is a proprietary, formulated, modified-siloxane deaerator designed to eliminate foam, pinholing, and solvent-popping problems in water-based coatings applied by airless (or air-assisted) spray technologies without generating surface defects. Airase® 8070 Deaerator can be especially effective against microfoam because it is designed to leave a defect-free surface, even when thick layers are applied or highly vicous coatings are sprayed. Airase® 8070 Deaerator contains no chemicals that are considered VOCs per the European Solvent Directive or the European Decorative Paint Directive; it contributes no VOCs nder EPA Method 24 testing conditions when evaluated at typical used levels (1% by weight) in a zero-VOC coating formulation. Additionally, Airase® 8070 Deaerator contains no added alkylphenol ethoxylates (APEs) or hazardous air pollutants (HAPs). 收起 | Request Sample |
| ALBIDUR® 1223 | Evonik Operations GmbH, BL Coating Additives | ALBIDUR® 1223可提高基于SILIKOPON® EF和SILIKOFTAL® ED的防腐涂料的柔韧性，使配方性能更加完善。它不会迁移、不含有机溶剂且不受标签要求的限制。 | Request Sample |
| ALBIDUR® EP 2240 A | Evonik Operations GmbH, BL Coating Additives | ALBIDUR® EP 2240 A shows the highest performance in enhancing impact resistance without influencing chemical or corrosion resistance properties of pigmented epoxy coatings. | Request Sample |
| ALBIDUR® PU 5640 | Evonik Operations GmbH, BL Coating Additives | ALBIFLEX® 348是一种黄色不透明的液体，双酚A环氧硅嵌段共聚物。该活性树脂改性剂用于底漆/填料和面漆，用于溶剂型和无溶剂型双组分和热固化环氧树脂配方。该产品不会降低透明度，具有出色的柔韧性。它也增加了附着力和极好的耐水性。ALBIFLEX® 348良好的保存了网密度，不改变机械性能，对芳香族环氧树脂具有良好的相容性。 | Request Sample |
| Benzidine Orange R | Emperor Pigment Co., Ltd. | Benzidine Orange R is a yellowish colored pigment that is used in solvent inks, aqueous inks, and aqueous coatings. It has a density value of 1.4 and a pH value of 7. This product has a color index number of Pigment Orange 16, a CAS number of 6505-28-8, a...展开 Benzidine Orange R is a yellowish colored pigment that is used in solvent inks, aqueous inks, and aqueous coatings. It has a density value of 1.4 and a pH value of 7. This product has a color index number of Pigment Orange 16, a CAS number of 6505-28-8, and an EU number of 229-388-1. 收起 | |
| Benzidine Yellow 121H | Emperor Pigment Co., Ltd. | Benzidine Yellow 121H is a pigment that is bright yellow in color. It has a color index number of Pigment Yellow 12, a CAS number of 6358-85-6, and an EU number of 228-787-8. This product has a density value of 1.5, a pH value of 6.0 to 7.0, and is used i...展开 Benzidine Yellow 121H is a pigment that is bright yellow in color. It has a color index number of Pigment Yellow 12, a CAS number of 6358-85-6, and an EU number of 228-787-8. This product has a density value of 1.5, a pH value of 6.0 to 7.0, and is used in PA inks, NC inks, PP inks, and Toluene based inks. 收起 | |
| Benzidine Yellow DHG | Emperor Pigment Co., Ltd. | Benzidine Yellow DHG is a bright yellow colored pigment that is used in offset inks and textile printing. It has a density value of 1.5 and a pH value of 6.0 to 7.0. This product has a color index number of Pigment Yellow 12, a CAS number of 6358-85-6, an...展开 Benzidine Yellow DHG is a bright yellow colored pigment that is used in offset inks and textile printing. It has a density value of 1.5 and a pH value of 6.0 to 7.0. This product has a color index number of Pigment Yellow 12, a CAS number of 6358-85-6, and an EU number of 228-787-8. 收起 | |
| Benzidine Yellow G | Emperor Pigment Co., Ltd. | Benzidine Yellow G is a pigment that is reddish yellow and transparent in color. It has a color index number of Pigment Yellow 12, a CAS number of 6358-85-6, and an EU number of 228-787-8. This product has a density value of 1.5, a pH value of 6.0 to 7.0,...展开 Benzidine Yellow G is a pigment that is reddish yellow and transparent in color. It has a color index number of Pigment Yellow 12, a CAS number of 6358-85-6, and an EU number of 228-787-8. This product has a density value of 1.5, a pH value of 6.0 to 7.0, and is used in offset inks, waterbased inks, and textile printing. 收起 | |
| Benzidine Yellow G-A | Emperor Pigment Co., Ltd. | Benzidine Yellow G-A is a pigment that is reddish yellow in color. It has a color index number of Pigment Yellow 12, a CAS number of 6358-85-6, and an EU number of 228-787-8. This product has a density value of 1.5, a pH value of 6.0 to 7.0, and is used i...展开 Benzidine Yellow G-A is a pigment that is reddish yellow in color. It has a color index number of Pigment Yellow 12, a CAS number of 6358-85-6, and an EU number of 228-787-8. This product has a density value of 1.5, a pH value of 6.0 to 7.0, and is used in offset inks, waterbased inks, and textile printing. 收起 | |
| Benzidine Yellow G-B | Emperor Pigment Co., Ltd. | Benzidine Yellow G-B is a greenish yellow and semitransparent colored pigment that is used in offset inks, waterbased inks, and textile printing. It has a color index number of Pigment Yellow 12, a CAS number of 6358-85-6, and an EU number of 228-787-8. T...展开 Benzidine Yellow G-B is a greenish yellow and semitransparent colored pigment that is used in offset inks, waterbased inks, and textile printing. It has a color index number of Pigment Yellow 12, a CAS number of 6358-85-6, and an EU number of 228-787-8. This product has a density value of 1.5 and a pH value of 6.0 to 7.0. 收起 | |
| Benzimidazolone Orange | Emperor Pigment Co., Ltd. | Benzimidazolone Orange is a pigment that is orange in color. It has a color index number of Pigment Orange 64 and a CAS number of 72102-84-2. This product has a heat stability value of 250 degrees Celsius, an oil absorption value of 40 to 60 grams per 100...展开 Benzimidazolone Orange is a pigment that is orange in color. It has a color index number of Pigment Orange 64 and a CAS number of 72102-84-2. This product has a heat stability value of 250 degrees Celsius, an oil absorption value of 40 to 60 grams per 100 grams, and is used in paints and printing inks. 收起 | |
| Benzimidazolone Orange HL | Emperor Pigment Co., Ltd. | Benzimidazolone Orange HL is an orange colored pigment that is used in offset inks, solvent inks, aqueous inks, and paints. It has a color index number of Pigment Orange 36, a CAS number of 12236-62-3, and an EU number of 235-462-4. This product has a den...展开 Benzimidazolone Orange HL is an orange colored pigment that is used in offset inks, solvent inks, aqueous inks, and paints. It has a color index number of Pigment Orange 36, a CAS number of 12236-62-3, and an EU number of 235-462-4. This product has a density value of 1.4 and a pH value of 6.5. 收起 | |
| Carbowet® 106 Surfactant | Evonik Operations GmbH, BL Coating Additives | 多官能团、低起泡、不含溶剂和烷基酚乙氧基化物的助剂，用于颜料和基材润湿 | Request Sample |
| CARBOWET® 109 Surfactant | Evonik Operations GmbH, BL Coating Additives | 经济有效的表面活性剂，可提供快速的基材和颜料润湿，适合各种应用场合 | Request Sample |
| Carbowet® 138 Surfactant | Evonik Operations GmbH, BL Coating Additives | CARBOWET® 138表面活性剂是一种多功能添加剂，适用于颜料和基材润湿。这种非离子型表面活性剂通常是单独使用或与阴离子表面活性剂组合使用。该成本有效的表面活性剂可提供快速基材和颜料润湿性，并适合各种应用。 | Request Sample |
| Carbowet® GA-100 Surfactant | Evonik Operations GmbH, BL Coating Additives | 该表面活性剂是非离子型表面活性剂的混合物，其特征为多功能、低起泡、无溶剂、无烷基酚乙氧基化物添加剂，用于颜料和基材润湿。该独特专利技术的混合物，可用于提供快速基材和颜料润湿，而且在建筑漆配方和水性颜料分散体中具有与共用增稠剂更佳的相容性 | Request Sample |
| Carbowet® GA-210 Surfactant | Evonik Operations GmbH, BL Coating Additives | Carbowet® GA-210 Surfactant is a formulated nonionic additive for use in a wide range of applications. This multifunctional, low- foaming grind aid can provide rapid pigment and substrate wetting and is an environmentally preferable alternative to APE- co...展开 Carbowet® GA-210 Surfactant is a formulated nonionic additive for use in a wide range of applications. This multifunctional, low- foaming grind aid can provide rapid pigment and substrate wetting and is an environmentally preferable alternative to APE- containing surfactants. It is designed to assist in the formulation of low- to zero-VOC coatings while offering improved color development, freeze-thaw stability, and scrub resistance. The performance advantages provided by Carbowet® GA-210 surfactant extend to a variety of applications where surface tension reduction and wetting combined in a compatible, easy-to-incorporate liquid are desired. Carbowet® GA-210 surfactant offers the most universal and balanced properties suitable for all applications. 收起 | Request Sample |
| Carbowet® GA-211 Surfactant | Evonik Operations GmbH, BL Coating Additives | 作为一种基材润湿剂，Surfynol CT-211 可应用于水性涂料、油墨、胶粘剂和许多其它体系中。用量约为总配方量的0.1～3.0% | Request Sample |
| Carbowet® GA-221 Surfactant | Evonik Operations GmbH, BL Coating Additives | 在颜料碾磨应用中，Surfynol CT-221 可通过对颜料颗粒较好的润湿和碾磨气泡控制来增加展色性。它可在高颜料负载量下提供低粘度和出色的分散稳定性 | Request Sample |
| CCR 110 | CINKARNA | CCR is an ultrafine, nanoparticle version of a rutile titanium dioxide pigment. This product has been surface modified. It can be used in transparent UV coatings for various substrates. | |
| CCR 130 | CINKARNA | CCR 130 is an ultrafine, nanoparticle version of a rutile titanium dioxide pigment. This product has been surface modified. It can be used in transparent UV coatings for various substrates. | |
| CCR 150 | CINKARNA | CCR 150 is an ultrafine, nanoparticle version of a rutile titanium dioxide pigment. This product has been surface-modified. It can be used in transparent UV coatings for various substrates. | |
| CF1-135 | NuSil Silicone Technology 1 | CF1-135 is high technology translucent silicone primer that is specifically formulated for use with platinum cured systems where conventional primers are insufficient. This product can help improve the adhesion of addition-cured systems to different subst...展开 CF1-135 is high technology translucent silicone primer that is specifically formulated for use with platinum cured systems where conventional primers are insufficient. This product can help improve the adhesion of addition-cured systems to different substrates such as metals, ceramics, glass, some plastics and other silicone material. It is a one-component primer that is supplied in VM&P Napththa and it requires no mixing. 收起 | |
| CF1-141 | NuSil Silicone Technology 1 | CF1-141 is a high technology silicone primer that is specially formulated to be used with platinum-cured systems and is colored red to provide an easy visual determination of surface coverage. It is a lower Volatile Organic Component (VOC) product and air...展开 CF1-141 is a high technology silicone primer that is specially formulated to be used with platinum-cured systems and is colored red to provide an easy visual determination of surface coverage. It is a lower Volatile Organic Component (VOC) product and air dries. This primer improves adhesion of addition-cured systems to various substrates such as glass, metals, plastics, ceramics and other silicone materials. 收起 | |
| CF1-3510 | NuSil Silicone Technology 1 | CF1-3510 is a fluorosilicone potting and encapsulating elastomer that cures with the addition of heat. It is best used for applications that require solvent resistance and for molding parts such as stoppers, o-rings, and seals. This product can also be us...展开 CF1-3510 is a fluorosilicone potting and encapsulating elastomer that cures with the addition of heat. It is best used for applications that require solvent resistance and for molding parts such as stoppers, o-rings, and seals. This product can also be used as an encapsulating, potting and sealing material and it is best used in applications requiring an operating temperature range of -65°C to 240°C (-85°F to 465°F). 收起 | |
| CF1-3710-2 | NuSil Silicone Technology 1 | CF1-3710-2 is a fluorosilicone foam that has a 1:1 ratio with a white Part A and gray Part B for easy identification and mixing. This product cures very quickly at room temperature to an elastomeric foam. It can be used as a solvent resistant seal or in s...展开 CF1-3710-2 is a fluorosilicone foam that has a 1:1 ratio with a white Part A and gray Part B for easy identification and mixing. This product cures very quickly at room temperature to an elastomeric foam. It can be used as a solvent resistant seal or in shock and vibration dampening situations that require a flexible, light weight foam with exceptional radiation resistance and thermal insulation. This foam is especially useful where stability at higher and lower temperatures is required. 收起 | |
| CF1-3800 | NuSil Silicone Technology 1 | CF1-3800 is a thermally conductive, fluorosilicone elastomer that cures at room temperature, or rapidly with the addition of heat. It can be used to adhere covers on housings, modules, and other configurations that require a non-flowable material. This pr...展开 CF1-3800 is a thermally conductive, fluorosilicone elastomer that cures at room temperature, or rapidly with the addition of heat. It can be used to adhere covers on housings, modules, and other configurations that require a non-flowable material. This product can also be utilized as an adhesive, sealant or molding material when solvent resistance is needed. It can provide the transfer of heat between electrical components and heat sinks, and can operate at a temperature range of -65°C to 225°C (-85°F to 437°F). 收起 | |
| CF19-2186 | NuSil Silicone Technology 1 | CF19-2186 is a general purpose silicone elastomer that has a medium cure rate and is provided in mix and dispense applicators. This product can provide protection for assemblies and electronic components against, vibration, shock, ozone, moisture, dust an...展开 CF19-2186 is a general purpose silicone elastomer that has a medium cure rate and is provided in mix and dispense applicators. This product can provide protection for assemblies and electronic components against, vibration, shock, ozone, moisture, dust and other contaminants. It can also be utilized as an encapsulating or potting material, and can replicate surfaces and devices. 收起 | |
| CF19-2615 | NuSil Silicone Technology 1 | CF19-2615 is a two-part, silicone elastomer that is optically clear and solvent free. It cures at room temperature or rapidly with the addition of heat. This product can be use for photonics applications such as photo detectors, HBLEDs, lasers, flat panel...展开 CF19-2615 is a two-part, silicone elastomer that is optically clear and solvent free. It cures at room temperature or rapidly with the addition of heat. This product can be use for photonics applications such as photo detectors, HBLEDs, lasers, flat panel displays and discrete optics that require a 1.41 refractive index. It can also provide protection to electronic components and assemblies against vibration, shock, moisture, dust and other environmental hazards. 收起 | |
| CF2-135 | NuSil Silicone Technology 1 | CF2-135 is a silicone primer that is specifically designed to be used with platinum-cured systems where conventional primers will not be sufficient. This product will help to improve the adhesion of addition-cured systems to various substrates such as woo...展开 CF2-135 is a silicone primer that is specifically designed to be used with platinum-cured systems where conventional primers will not be sufficient. This product will help to improve the adhesion of addition-cured systems to various substrates such as wood, metals, ceramics, plastics, and other silicone materials. For the best bonding results, be sure that the surface being primed is clean and degreased. 收起 | |
| CF2-3521 | NuSil Silicone Technology 1 | CF2-3521 is a translucent fluorosilicone elastomer that cures rapidly with heat from an oven or heating lamp, or at room temperature. It can be utilized in applications that would require a good solvent resistance. This product is especially useful for mo...展开 CF2-3521 is a translucent fluorosilicone elastomer that cures rapidly with heat from an oven or heating lamp, or at room temperature. It can be utilized in applications that would require a good solvent resistance. This product is especially useful for molding parts such as O-rings, stoppers, and seals. 收起 | |
| CF2-3521-2 | NuSil Silicone Technology 1 | CF2-3521-2 is a two part, black, 50 mole % fluorosilicone elastomer that cures at room temperature, or rapidly with heat from a heating lamp or oven. This product can be especially useful for molding parts such as stoppers, seals, and O-rings. It can also...展开 CF2-3521-2 is a two part, black, 50 mole % fluorosilicone elastomer that cures at room temperature, or rapidly with heat from a heating lamp or oven. This product can be especially useful for molding parts such as stoppers, seals, and O-rings. It can also be used in applications that would require a solvent resistance. 收起 | |
| CF3-3521 | NuSil Silicone Technology 1 | CF3-3521 is a fluorosilicone elastomer that can be used with with liquid injection molding equipment. It is an exceptional product to use for molding high quality parts such as gaskets, seals and o-rings. It is also ideal for applications that require a m...展开 CF3-3521 is a fluorosilicone elastomer that can be used with with liquid injection molding equipment. It is an exceptional product to use for molding high quality parts such as gaskets, seals and o-rings. It is also ideal for applications that require a medium hardness silicone and solvent resistance. This product is best utilized in applications that require an operating temperature range of -65 to 240°C (-85 to 465°F). 收起 | |
| CF5-3521-2 | NuSil Silicone Technology 1 | CF5-3521-2 is a two part, 50 mole % fluorosilicone that has a 1:1 Mix Ratio (Part A:B). It can be cured at room temperature, or more rapidly by heating it in an oven or with a heating lamp. The product is especially useful as a coating, sealant, adhesive ...展开 CF5-3521-2 is a two part, 50 mole % fluorosilicone that has a 1:1 Mix Ratio (Part A:B). It can be cured at room temperature, or more rapidly by heating it in an oven or with a heating lamp. The product is especially useful as a coating, sealant, adhesive or molding material in applications that require solvent resistance. 收起 | |
| CF6-135 | NuSil Silicone Technology 1 | CF6-135 is a one-component, high technology silicone primer that is translucent to preserve visibility with translucent products. It is specially designed to be used with platinum cured systems where conventional primers are insufficient. This product wil...展开 CF6-135 is a one-component, high technology silicone primer that is translucent to preserve visibility with translucent products. It is specially designed to be used with platinum cured systems where conventional primers are insufficient. This product will improve the adhesion of addition-cured systems to many different substrates such as glass, metals, plastics, ceramics and other silicone material. 收起 | |
| COLOROL® F | Evonik Operations GmbH, BL Coating Additives | 用于溶剂型体系的润湿和分散添加剂。 | Request Sample |
| CV-1142 | NuSil Silicone Technology 1 | CV-1142 is a non corrosive that has controlled volatility, RTV silicone adhesive/sealant.. It is best used as a sealing, caulking, adhesive or potting material in applications that require little outgassing. This helps to avoid condensation in sensitive d...展开 CV-1142 is a non corrosive that has controlled volatility, RTV silicone adhesive/sealant.. It is best used as a sealing, caulking, adhesive or potting material in applications that require little outgassing. This helps to avoid condensation in sensitive devices. Furthermore, it is also best used for applications requiring extremely low temperatures. 收起 | |
| CV-1143 | NuSil Silicone Technology 1 | CV-1143 is a silicone adhesive/sealant that is best used in applications that require low outgassing and minimal volatile condensables under extreme operating conditions. It is also used as a bond and sealant in applications such as overhead or vertical j...展开 CV-1143 is a silicone adhesive/sealant that is best used in applications that require low outgassing and minimal volatile condensables under extreme operating conditions. It is also used as a bond and sealant in applications such as overhead or vertical joints that require a non-slumping, and one-part materials. 收起 | |
| CV-1144-0 | NuSil Silicone Technology 1 | CV-1144-0 is an oxygen protective silicone overcoat that is used for applications where extremely low temperatures and low outgassing are a hazard. It functions as a protective overcoating for electric components and atomic oxygen resistance in space appl...展开 CV-1144-0 is an oxygen protective silicone overcoat that is used for applications where extremely low temperatures and low outgassing are a hazard. It functions as a protective overcoating for electric components and atomic oxygen resistance in space applications. This product also has a broad operating temperature range and can provide radiation and thermal stress resistance. 收起 | |
| CV-1146-2 | NuSil Silicone Technology 1 | CV-1146-2 is a one part, flat black silicone dispersion that meets outgas specifications outlined in NASA and the European Space Agency. It is an ideal product to use in space and electrical applications that require low outgassing under extreme operating...展开 CV-1146-2 is a one part, flat black silicone dispersion that meets outgas specifications outlined in NASA and the European Space Agency. It is an ideal product to use in space and electrical applications that require low outgassing under extreme operating conditions. It also provides an atomic oxygen protection and resistance to radiation and thermal stress. 收起 | |
| CV-1148 | NuSil Silicone Technology 1 | CV-1148 is a silicone atomic oxygen protective coating that can be use at a broad temperature range. This product is best used for applications that require low outgassing under extreme operating conditions. It exceeds the low outgas specifications outlin...展开 CV-1148 is a silicone atomic oxygen protective coating that can be use at a broad temperature range. This product is best used for applications that require low outgassing under extreme operating conditions. It exceeds the low outgas specifications outlined by NASA and the European Space Agency. 收起 | |
| CV-1152 | NuSil Silicone Technology 1 | CV-1152 is a silicone conformal coating that can be used for industrial or space applications that require low outgassing under extreme operating conditions. It can be utilized as a coating on rigid and flexible circuit boards, and can protect sensitive e...展开 CV-1152 is a silicone conformal coating that can be used for industrial or space applications that require low outgassing under extreme operating conditions. It can be utilized as a coating on rigid and flexible circuit boards, and can protect sensitive electronic components such as connectors and switches. This product can also provide protection against harsh environments while maintaining good dielectric properties. 收起 | |
| CV-1161 | NuSil Silicone Technology 1 | CV-1161 is a pressure sensitive silicone adhesive that retains its adhesive qualities in the presence of minor liquid and particulate contaminants. It can be used in applications that require low outgassing and minimal volatile condesable materials. This ...展开 CV-1161 is a pressure sensitive silicone adhesive that retains its adhesive qualities in the presence of minor liquid and particulate contaminants. It can be used in applications that require low outgassing and minimal volatile condesable materials. This product is ideal for adhering and bonding silicone elastomers, metals, paper, glass, fabric organics rubbers, some synthetics, and films such as polyester or kapton. 收起 | |
| CV-1500 | NuSil Silicone Technology 1 | CV-1500 is a one part, black, electrically conductive RTV silicone adhesive/sealant that can be used for RFI and EMI shielding in electrical and space applications that require static dissipation. It can also protect components from extremes in temperatur...展开 CV-1500 is a one part, black, electrically conductive RTV silicone adhesive/sealant that can be used for RFI and EMI shielding in electrical and space applications that require static dissipation. It can also protect components from extremes in temperature, humidity, radiation, thermal and mechanical stress. This adhesive is well suited for form-in-place conductive gaskets and attaching heating coils to solar collector plates. 收起 | |
| CV-2187 | NuSil Silicone Technology 1 | CV-2187 is a two-part, translucent, pourable silicone system that offers a high tear strength and good physical properties. Its primary function is to provide protection for electrical components against shock, vibration, moisture, dust, chemicals and oth...展开 CV-2187 is a two-part, translucent, pourable silicone system that offers a high tear strength and good physical properties. Its primary function is to provide protection for electrical components against shock, vibration, moisture, dust, chemicals and other environmental hazards. It can also protect potting connectors, cable and harness breakouts, molded high-voltage components, seals and gaskets. 收起 |
