| CV-1161 | NuSil Silicone Technology 1 | CV-1161 is a pressure sensitive silicone adhesive that retains its adhesive qualities in the presence of minor liquid and particulate contaminants. It can be used in applications that require low outgassing and minimal volatile condesable materials. This ...展开 CV-1161 is a pressure sensitive silicone adhesive that retains its adhesive qualities in the presence of minor liquid and particulate contaminants. It can be used in applications that require low outgassing and minimal volatile condesable materials. This product is ideal for adhering and bonding silicone elastomers, metals, paper, glass, fabric organics rubbers, some synthetics, and films such as polyester or kapton. 收起 | |
| CV-1500 | NuSil Silicone Technology 1 | CV-1500 is a one part, black, electrically conductive RTV silicone adhesive/sealant that can be used for RFI and EMI shielding in electrical and space applications that require static dissipation. It can also protect components from extremes in temperatur...展开 CV-1500 is a one part, black, electrically conductive RTV silicone adhesive/sealant that can be used for RFI and EMI shielding in electrical and space applications that require static dissipation. It can also protect components from extremes in temperature, humidity, radiation, thermal and mechanical stress. This adhesive is well suited for form-in-place conductive gaskets and attaching heating coils to solar collector plates. 收起 | |
| CV-2500 | NuSil Silicone Technology 1 | CV-2500 is a strong silicone based adhesive that is made to handle extreme conditions in space applications including condensation, humidity, radiation, and both mechanical and thermal stress. It can also be an adhesive in applications that involve solar ...展开 CV-2500 is a strong silicone based adhesive that is made to handle extreme conditions in space applications including condensation, humidity, radiation, and both mechanical and thermal stress. It can also be an adhesive in applications that involve solar cell arrays where clarity and low volatility is needed. 收起 | |
| CV-2566 | NuSil Silicone Technology 1 | CV-2566 is a flowable silicone adhesive that has a broad operating temperature range. The primary use for this product is to be used for applications that require low outgassing and helps eliminate condensation in sensitive devices. In space and electroni...展开 CV-2566 is a flowable silicone adhesive that has a broad operating temperature range. The primary use for this product is to be used for applications that require low outgassing and helps eliminate condensation in sensitive devices. In space and electronic applications, it can be utilized as a sealant or adhesive to help control high vacuum environments. 收起 | |
| CV-2567 | NuSil Silicone Technology 1 | CV-2567 is a pourable RTV siicone that can be used as a diluent for reducing the viscosity of other controlled volatility silicones. This product meets the ASTM 595 low outgas specifications outlined in NASA and the European Space Agency. It can be used a...展开 CV-2567 is a pourable RTV siicone that can be used as a diluent for reducing the viscosity of other controlled volatility silicones. This product meets the ASTM 595 low outgas specifications outlined in NASA and the European Space Agency. It can be used as an adhesive or sealant for electronic and space applications. 收起 | |
| CV-2900 | NuSil Silicone Technology 1 | CV-2900 is a non-corrosive silicone adhesive that is designed for enhanced performance in extreme low and high temperatures. It can be used as a bond and sealant for applications such as overhead or vertical joints that require a non-slumping and one-part...展开 CV-2900 is a non-corrosive silicone adhesive that is designed for enhanced performance in extreme low and high temperatures. It can be used as a bond and sealant for applications such as overhead or vertical joints that require a non-slumping and one-part material. It can also be utilized as an adhesive , caulking or potting material in electronics/space applications that require minimal outgassing and provides protection from condensation in sensitive devices. 收起 | |
| CV2-1142 | NuSil Silicone Technology 1 | CV2-1142 is a non-corrosive, non-slumping, translucent RTV silicone adhesive/sealant that has controlled volatility. It can be used in applications that require low outgassing under extreme operating conditions. This product is useful for sealing and bond...展开 CV2-1142 is a non-corrosive, non-slumping, translucent RTV silicone adhesive/sealant that has controlled volatility. It can be used in applications that require low outgassing under extreme operating conditions. This product is useful for sealing and bonding in applications such as overhead or vertical joints that require a non-slumping, one-part material. It can also be utilized as a sealant, caulking, adhesive or potting material in space and electrical applications that require minimal outgassing. 收起 | |
| CV2-1161 | NuSil Silicone Technology 1 | CV2-1161 is a pressure sensitive silicone adhesive that retains its adhesive qualities in the presence of minor liquid particulate contaminants. It is able to withstand normal pressure variations as well as high temperature exposure. This product is ideal...展开 CV2-1161 is a pressure sensitive silicone adhesive that retains its adhesive qualities in the presence of minor liquid particulate contaminants. It is able to withstand normal pressure variations as well as high temperature exposure. This product is ideal for bonding and adhering silicone elastomers, paper, metals, glass, fabric, films, and some synthetics. It can also be used for applications that require low outgassing and minimal volatile condensable materials. 收起 | |
| CV3-2500 | NuSil Silicone Technology 1 | CV3-2500 is an optically clear silicone that is has controlled volatility. It is an ideal product for applications that require a low viscosity to create a superior flow and low outgassing. This is how it helps keep condensation from affecting sensitive d...展开 CV3-2500 is an optically clear silicone that is has controlled volatility. It is an ideal product for applications that require a low viscosity to create a superior flow and low outgassing. This is how it helps keep condensation from affecting sensitive devices. It can also be utilized as an adhesive for projects involving solar arrays. 收起 | |
| CV4-2289-1 | NuSil Silicone Technology 1 | CV4-2289-1 is a thixotropic silicone elastomer that can be used as an adhesive that offers superior tear strength. This silicone also demonstrates flexibility at extremely low temperatures with a stiffening temperature of approximately -115°C. It can be u...展开 CV4-2289-1 is a thixotropic silicone elastomer that can be used as an adhesive that offers superior tear strength. This silicone also demonstrates flexibility at extremely low temperatures with a stiffening temperature of approximately -115°C. It can be used to protect electronic components, cable harness breakouts, seals, and gaskets from harsh environmental conditions. 收起 | |
| CV7-1142-1 | NuSil Silicone Technology 1 | CV7-1142-1 is a non corrosive material that has a white color and it is a non-slumping silicone RTV. It can be used as a caulking, adhesive or sealant that protects sensitive circuits, connectors and switches in space applications. This product has a broa...展开 CV7-1142-1 is a non corrosive material that has a white color and it is a non-slumping silicone RTV. It can be used as a caulking, adhesive or sealant that protects sensitive circuits, connectors and switches in space applications. This product has a broad operating temperature range so it can withstand hot and cold conditions. It also can be used for sealing openings in modules or housings where grooves or other configurations require a non-flowable to limited flow material. 收起 | |
| ECOPOL LB-64 | Ecopol Tech | ECOPOL LB-64 is a monocomponent hybrid organic-inorganic fluorinated polyurethane dispersed in butyl acetate solvent, which undergoes cross-linking in the presence of moisture and drying. This product stands out for its resistance to abrasion, ink repelle...展开 ECOPOL LB-64 is a monocomponent hybrid organic-inorganic fluorinated polyurethane dispersed in butyl acetate solvent, which undergoes cross-linking in the presence of moisture and drying. This product stands out for its resistance to abrasion, ink repellence, cigarette burns, and stains like coffee, while also exhibiting resistance to steam, high temperatures, and stability against UV radiation. It serves as an excellent hydrophobic and oleophobic coating and it has a high adhesion to inorganic surfaces. ECOPOL LB-64 is particularly recommended as a final coating for materials highly exposed to corrosion or erosion, such as aluminum (and other metals), high-pressure laminates (HPL), wood, and glass, among others. 收起 | |
| ECOPOLBUILD 1 | Ecopol Tech | ECOPOLBUILD 1 is an anionic aqueous dispersion of organic-inorganic hybrid cross-linked polyurethane, specially designed for protective coating for the construction industry with high hydrolytic stability. Once applied and cured, the product exhibits wate...展开 ECOPOLBUILD 1 is an anionic aqueous dispersion of organic-inorganic hybrid cross-linked polyurethane, specially designed for protective coating for the construction industry with high hydrolytic stability. Once applied and cured, the product exhibits water repellent properties, thus providing good moisture resistance. It also imparts high abrasion and alkali resistance. This product contains approximately 85% biobased products. 收起 | |
| ECOPOLBUILD 16 | Ecopol Tech | ECOPOLBUILD 16 is an anionic aqueous dispersion of organic-inorganic hybrid cross-linked polycarbonate-polyurethane, specially designed for protective coatings in the construction and wood industry with excellent hydrolysis and solvent stability. Once app...展开 ECOPOLBUILD 16 is an anionic aqueous dispersion of organic-inorganic hybrid cross-linked polycarbonate-polyurethane, specially designed for protective coatings in the construction and wood industry with excellent hydrolysis and solvent stability. Once applied and cured, the product exhibits water-repellent properties, providing good moisture resistance. Additionally, it imparts excellent abrasion and alkali resistance. This product contains more than 70% biobased products. 收起 | |
| ECOPOLBUILD 3 | Ecopol Tech | ECOPOLBUILD 3 is a cationic aqueous dispersion of organic-inorganic hybrid cross-linked polyurethane, specially designed for protective coating for the construction industry with high hydrolytic stability. Once applied and cured, the product exhibits wate...展开 ECOPOLBUILD 3 is a cationic aqueous dispersion of organic-inorganic hybrid cross-linked polyurethane, specially designed for protective coating for the construction industry with high hydrolytic stability. Once applied and cured, the product exhibits water repellent properties, thus providing good moisture resistance. It also imparts high abrasion resistance. This product contains approximately 85% biobased products. 收起 | |
| ECOPOLCOAT CSS 052 | Ecopol Tech | ECOPOLCOAT CSS 052 is a unique product in the field of textile coatings as it represents a cationic aqueous organic-inorganic hybrid polyurethane dispersion developed to serve as a top coating. It exhibits superb superhydrophobic characteristics, impartin...展开 ECOPOLCOAT CSS 052 is a unique product in the field of textile coatings as it represents a cationic aqueous organic-inorganic hybrid polyurethane dispersion developed to serve as a top coating. It exhibits superb superhydrophobic characteristics, imparting high water repellency to coated materials. ECOPOLCOAT CSS 052 is environmentally friendly as it is water-based, fluorine-free, and made from 84% natural resources. The dispersion imparts a silky feel to textiles. It is suitable for all types of fabrics, enhancing their performance by improving abrasion resistance. In essence, ECOPOLCOAT CSS 052 emerges as a versatile, high-performance coating solution, combining functionality, aesthetics and ecological principles. 收起 | |
| ECOPOLCOAT FF 052 | Ecopol Tech | ECOPOLCOAT FF 052 is a cationic aqueous dispersion of organic-inorganic hybrid cross-linked polyurethane. Once cured, it has a high resistance to abrasion, water, oil, and dirt. It also shows good resistance to weathering (rain, sun, dirt, particles, etc....展开 ECOPOLCOAT FF 052 is a cationic aqueous dispersion of organic-inorganic hybrid cross-linked polyurethane. Once cured, it has a high resistance to abrasion, water, oil, and dirt. It also shows good resistance to weathering (rain, sun, dirt, particles, etc.). It contains CF2 chains in the polyurethane backbone. This CF2 is biodegradable. 收起 | |
| ECOPOLCOAT FF 30 | Ecopol Tech | ECOPOLCOAT FF 052 is an anionic aqueous dispersion of organic-inorganic hybrid cross-linked polyurethane. Once cured, it has a high resistance to abrasion, water, alkali, oil, and dirt. It also shows good resistance to weathering (rain, sun, dirt, particl...展开 ECOPOLCOAT FF 052 is an anionic aqueous dispersion of organic-inorganic hybrid cross-linked polyurethane. Once cured, it has a high resistance to abrasion, water, alkali, oil, and dirt. It also shows good resistance to weathering (rain, sun, dirt, particles, etc.). It contains CF2 chains in the polyurethane backbone. This CF2 is biodegradable. 收起 | |
| ECOPOLEDER-BASE | Ecopol Tech | ECOPOLEDER-BASE is an anionic aqueous polyurethane-polyester dispersion with a solids content of 40%. Specifically designed for impregnation applications it provides adhesive strength, which creates a robust and durable bond to the leather substrate. ECOP...展开 ECOPOLEDER-BASE is an anionic aqueous polyurethane-polyester dispersion with a solids content of 40%. Specifically designed for impregnation applications it provides adhesive strength, which creates a robust and durable bond to the leather substrate. ECOPOLEDER-BASE imparts an excellent elasticity to the material, significantly improving its flexibility. This translates into a superior handling experience, making it the ideal choice for applications that demand both strength and ease of handling. ECOPOLEDER-BASE represents a solution, which incorporates a synthesis of advanced polyurethane-polyester technology to offer increased performance and versatility in leather impregnation processes. 收起 | |
| ECOPOLEDER-BT | Ecopol Tech | ECOPOLEDER-BT is an aqueous anionic polyurethane dispersion with a solids content of 30%. In particular, its cross-linking process is activated during the drying phase, which improves its performance characteristics. Designed for leather impregnation and ...展开 ECOPOLEDER-BT is an aqueous anionic polyurethane dispersion with a solids content of 30%. In particular, its cross-linking process is activated during the drying phase, which improves its performance characteristics. Designed for leather impregnation and finishing applications, this dispersion significantly increases the abrasion resistance, conferring durability to the material. It has a high hardness, providing solid protection against wear. ECOPOLEDER-BT has specific binding properties with leather, ensuring strong and durable adhesion. In addition, the dispersion offers alkali resistance, extending its suitability for various conditions. With inherent waterproof properties, it further enhances the durability and utility of leather in various environments. In addition, ECOPOLEDER-BT is environmentally friendly, as more than 40% of its dry composition comes from organic sources. 收起 | |
| ECOPOLEDER-D-BASE | Ecopol Tech | ECOPOLEDER-D-BASE is an anionic aqueous polyurethane-polyester dispersion, which stands out for its significant solids content of 50%. Designed with a focus on durability and performance, this dispersion features high hydrolysis resistance, ensuring longe...展开 ECOPOLEDER-D-BASE is an anionic aqueous polyurethane-polyester dispersion, which stands out for its significant solids content of 50%. Designed with a focus on durability and performance, this dispersion features high hydrolysis resistance, ensuring longevity in applications. Adapted to leather impregnation processes, ECOPOLEDER-D-BASE offers exceptional elasticity, contributing to the flexibility and strength of the material. In particular, ECOPOLEDER-D-BASE exhibits exceptional adhesive strength, creating solid bonds with the leather substrate. This dispersion features advanced polymer technology, offering a high solids solution that elevates leather properties in durability, flexibility and handling. 收起 | |
| ECOPOLEDER-PC-TOP | Ecopol Tech | ECOPOLEDER-PC-TOP is an anionic aqueous polycarbonate-polyurethane dispersion of bio-based origin with a solids content of 35%. This coating serves to enhance the strength and durability of leather, providing an additional layer that acts as a protective ...展开 ECOPOLEDER-PC-TOP is an anionic aqueous polycarbonate-polyurethane dispersion of bio-based origin with a solids content of 35%. This coating serves to enhance the strength and durability of leather, providing an additional layer that acts as a protective barrier against scratches, stains and general wear and tear. Its application finds diverse uses, most notably in the manufacture of handbags, belts, footwear and other leather products. 收起 | |
| ECOPOLEDER-S-BASE | Ecopol Tech | ECOPOLEDER-BASE is an anionic aqueous polyurethane-polyester dispersion with a solids content of 40% adding groups with specific adhesion to leather. It is designed for impregnation applications, providing increased adhesive strength that creates a strong...展开 ECOPOLEDER-BASE is an anionic aqueous polyurethane-polyester dispersion with a solids content of 40% adding groups with specific adhesion to leather. It is designed for impregnation applications, providing increased adhesive strength that creates a strong, robust, and more durable bond to the leather substrate. ECOPOLEDER-BASE imparts good elasticity to the material, significantly improving its flexibility. This translates into a superior handling experience, making it the ideal choice for applications that demand strength and ease of handling. ECOPOLEDER-BASE represents a solution that incorporates a synthesis of advanced polyurethane-polyester technology to offer increased performance and versatility in leather impregnation processes. 收起 | |
| ECOPOLEDER-S-TOP | Ecopol Tech | ECOPOLEDER-S-TOP is a cationic aqueous polyurethane-silicone copolymer dispersion with a solids content of 30%. Its crosslinking mechanism is initiated during the drying process, which significantly increases its performance attributes. Designed primarily...展开 ECOPOLEDER-S-TOP is a cationic aqueous polyurethane-silicone copolymer dispersion with a solids content of 30%. Its crosslinking mechanism is initiated during the drying process, which significantly increases its performance attributes. Designed primarily for leather finishing applications, this dispersion substantially increases abrasion resistance, contributing to improved material durability. The high hardness of the formulation ensures solid wear protection, complemented by specific binding properties that establish a strong and durable adhesion to the leather. ECOPOLEDER-S-TOP goes beyond conventional functionalities by introducing a silky feel to the leather surface. In addition, it exhibits superhydrophobic properties, reinforcing the leather's resistance in various environmental conditions. In addition, more than 40% of its dry composition comes from bio-based materials. ECOPOLEDER-S-TOP is a sophisticated solution that combines the advantages of polyurethane polymers with silicone in the backbone to improve the performance and feel of leather products. 收起 | |
| ECOPOLEDER-TOP | Ecopol Tech | ECOPOLEDER-TOP constitutes an aqueous cationic polyurethane dispersion characterized by a 30% solids content. Significantly, its cross-linking mechanism is activated during the drying phase, culminating in an enhancement of its inherent properties. Tailor...展开 ECOPOLEDER-TOP constitutes an aqueous cationic polyurethane dispersion characterized by a 30% solids content. Significantly, its cross-linking mechanism is activated during the drying phase, culminating in an enhancement of its inherent properties. Tailored for leather finishing applications, this dispersion markedly augments abrasion resistance, thereby conferring a notable degree of durability to the material. The elevated hardness of ECOPOLEDER-TOP ensures robust protection against wear and tear, complemented by specific binding properties that guarantee a resilient and enduring adhesion to the leather substrate. With intrinsic waterproof attributes, it further fortifies the leather's durability and adaptability across diverse environmental conditions. In addition to its functional attributes, ECOPOLEDER-TOP aligns seamlessly with environmental considerations, as more than 40% of its dry composition is derived from organic sources. This renders it a judicious and sustainable choice, harmonizing ecological consciousness with unwavering performance standards. 收起 | |
| ECOPOLEDER-TRANS | Ecopol Tech | ECOPOLEDER-TRANS is an anionic aqueous polyurethane-polyester dispersion, which is distinguished by an impressive 60% solids content with a low viscosity. This dispersion is designed to provide a protective coating and improve various leather properties. ...展开 ECOPOLEDER-TRANS is an anionic aqueous polyurethane-polyester dispersion, which is distinguished by an impressive 60% solids content with a low viscosity. This dispersion is designed to provide a protective coating and improve various leather properties. The high solids content of ECOPOLEDER-TRANS allows for a reduced application rate in transfer processes, optimising coating efficiency. ECOPOLEDER-TRANS provides increased wear resistance, flexibility and durability. 收起 | |
| ECOPOLSEC | Ecopol Tech | ECOPOLSEC is a white powder of amorphous precipitated silica with a homogeneous particle size and high absorption capacity. It stands out for its absorption capacity without gel formation. It is specifically used in the sludge drying process. | |
| ECOPUD EW-10 | Ecopol Tech | ECOPUD EW-10 is an anionic polyurethane in aqueous dispersion. It can be directly applied to porous materials (wood, paper) using various techniques (brush, roller, spray) without prior drying, with absorption tests recommended. It can also be applied to ...展开 ECOPUD EW-10 is an anionic polyurethane in aqueous dispersion. It can be directly applied to porous materials (wood, paper) using various techniques (brush, roller, spray) without prior drying, with absorption tests recommended. It can also be applied to previously dry surfaces. ECOPUD EW-10 is used in industries such as wood, graphic arts, lamination, footwear, textiles, paper, automotive, and construction. 收起 | |
| ECOPUD-42-45 | Ecopol Tech | ECOPUD 42-45 is an anionic dispersion of high-molecular-weight amorphous polyurethane, highly resistant to hydrolysis. It is utilized in the formulation of heat-activated adhesives and for wet bonding. This product serves as a key component in the formula...展开 ECOPUD 42-45 is an anionic dispersion of high-molecular-weight amorphous polyurethane, highly resistant to hydrolysis. It is utilized in the formulation of heat-activated adhesives and for wet bonding. This product serves as a key component in the formulation of adhesives for furniture, automotive, footwear, textiles, leather, cork, and the construction industry. ECOPUD 42-45 is particularly well-suited for wet bonding of textile substrates due to the softness of the polymer film and its resistance to high temperatures. The product is free of NMP, NEP, and VOC’s and organo-TIN free. 收起 | |
| ECOPUD-54 | Ecopol Tech | ECOPUD-54 is an aqueous anionic dispersion of high molecular weight polyurethane, used as a raw material in the formulation of heat-activated adhesives for various applications, such as furniture, automotive, footwear, leather, cork, and the construction ...展开 ECOPUD-54 is an aqueous anionic dispersion of high molecular weight polyurethane, used as a raw material in the formulation of heat-activated adhesives for various applications, such as furniture, automotive, footwear, leather, cork, and the construction industry. Due to its polymeric structure, ECOPUD-54 is particularly well-suited for applications involving plasticized PVC substrates. 收起 | |
| EPM-2420 | NuSil Silicone Technology 1 | EPM-2420 is a general purpose silicone adhesive that has a low volatility and a 1:1 Mix Ratio (Part A: Part B). The primary function of this adhesive is to protect electric components and assemblies against vibration, shock, dust, moisture, chemicals and ...展开 EPM-2420 is a general purpose silicone adhesive that has a low volatility and a 1:1 Mix Ratio (Part A: Part B). The primary function of this adhesive is to protect electric components and assemblies against vibration, shock, dust, moisture, chemicals and other hazards. It is also ideal for applications where a low viscosity and clarity are important. 收起 | |
| EPM-2890 | NuSil Silicone Technology 1 | EPM-2890 is a one part, white, silicone adhesive that is thermally conductive and non corrosive. It has the ability to operate on a wide temperature range and provide moderate heat transfer between electrical components and their heat sinks. This product ...展开 EPM-2890 is a one part, white, silicone adhesive that is thermally conductive and non corrosive. It has the ability to operate on a wide temperature range and provide moderate heat transfer between electrical components and their heat sinks. This product can also function as a caulking, sealing, potting or adhesive material in electronics applications that require minimal outgassing to prevent condensation from building in sensitive devices. 收起 | |
| FS-3730-2 | NuSil Silicone Technology 1 | FS-3730-2 is a black adhesive/sealant that is based on a fluorosilicone polymer with 100 mole % fluorosilicone. It can be utilized to bond or protect hardware components that are exposed to aviation fuels or gasoline. This product can also be used for sea...展开 FS-3730-2 is a black adhesive/sealant that is based on a fluorosilicone polymer with 100 mole % fluorosilicone. It can be utilized to bond or protect hardware components that are exposed to aviation fuels or gasoline. This product can also be used for sealing or bonding applications requiring fuel and/or solvent resistance. Another strong property is that it bonds aggressively to most surfaces. 收起 | |
| FS1-3730 | NuSil Silicone Technology 1 | FS1-3730 is an adhesive/sealant that is translucent and based on a 100 mole % fluorosilicone polymer. This product can be utilized for sealing and bonding applications that require solvent and/or fuel resistance. It is a very strong product and will bond ...展开 FS1-3730 is an adhesive/sealant that is translucent and based on a 100 mole % fluorosilicone polymer. This product can be utilized for sealing and bonding applications that require solvent and/or fuel resistance. It is a very strong product and will bond aggressively to most surfaces. 收起 | |
| FS3-3730 | NuSil Silicone Technology 1 | FS3-3730 is a translucent, one-part, adhesive/sealant that has 100 mole % flouorosilicone. It is strong and will bond aggressively to most surfaces. This product can be utilized for bonding and sealing applications that require solven and/or fuel resistan...展开 FS3-3730 is a translucent, one-part, adhesive/sealant that has 100 mole % flouorosilicone. It is strong and will bond aggressively to most surfaces. This product can be utilized for bonding and sealing applications that require solven and/or fuel resistance. It can also be used for protecting or bonding hardware components that have been exposed to gasoline or aviation fuels. 收起 | |
| PSA-1170 | NuSil Silicone Technology 1 | PSA-1170 is a one-part, non-curing, pressure sensitive silicone adhesive that has a translucent appearance and a low viscosity. It can be used for temporarily adhering to various substrates such as silicone, glass, metals, and organic rubbers. PSA-1170 is...展开 PSA-1170 is a one-part, non-curing, pressure sensitive silicone adhesive that has a translucent appearance and a low viscosity. It can be used for temporarily adhering to various substrates such as silicone, glass, metals, and organic rubbers. PSA-1170 is supplied in flammable solvents so it needs to be handled cautiously. Allow solvent to evaporate before adhering or attaching adhesive-coated objects together. 收起 | |
| R-1008-0 | NuSil Silicone Technology 1 | R-1008-0 is a translucent, one part, flowable silicone elastomer dispersion that cures in 7 days at room temperature when exposed to atmospheric moisture. It can be used as a marking ink for silicone rubber parts and other components where the coating mus...展开 R-1008-0 is a translucent, one part, flowable silicone elastomer dispersion that cures in 7 days at room temperature when exposed to atmospheric moisture. It can be used as a marking ink for silicone rubber parts and other components where the coating must maintain long term stability. It is best used for applications that require an operating temperature of 65°C to 260°C (-85°F to 465°F). 收起 | |
| R-1130 | NuSil Silicone Technology 1 | R-1130 is a non-corrosive, rapid curing, nun-slumping RTV silicone adhesive that can be used as a coating for semi-conductors and integrated circuits. It can also be utilized as an adhesive/sealant for electrical wires, terminals, mounting resistors and ...展开 R-1130 is a non-corrosive, rapid curing, nun-slumping RTV silicone adhesive that can be used as a coating for semi-conductors and integrated circuits. It can also be utilized as an adhesive/sealant for electrical wires, terminals, mounting resistors and connectors. It is ideal for overhead or side wall applications due to its non-slumping characteristics. 收起 | |
| R-1140 | NuSil Silicone Technology 1 | R-1140 is a one part, translucent, non-slumping silicone adhesive that is supplied in ready to use Semco® cartridges. This product bonds aggressively to most surfaces including glass, ceramics, metals, natural and synthetic fibers, wood, painted surfaces ...展开 R-1140 is a one part, translucent, non-slumping silicone adhesive that is supplied in ready to use Semco® cartridges. This product bonds aggressively to most surfaces including glass, ceramics, metals, natural and synthetic fibers, wood, painted surfaces and other silicone rubbers. It is best used for applications that require an operating temperature rang of 65 to 240°C (-85 to 465°F). 收起 | |
| R-2100-3 | NuSil Silicone Technology 1 | R-2100-3 is a red silicone ink that has a strong adhesion to other silicones and is dipersed in Xylene. It is designed to be used in application that require a rapid cure schedule and it provides a high capacity for single print applications. It is ideal ...展开 R-2100-3 is a red silicone ink that has a strong adhesion to other silicones and is dipersed in Xylene. It is designed to be used in application that require a rapid cure schedule and it provides a high capacity for single print applications. It is ideal as a marking ink on silicone parts as well as other components where the coating must demonstrate a long-term stability. 收起 | |
| R-2100-6 | NuSil Silicone Technology 1 | R-2100-6 is a green silicone ink that has a strong adhesion to other silicones and is dipersed in Xylene. It is designed to be used in application that require a rapid cure schedule and it provides a high capacity for single print applications. It is idea...展开 R-2100-6 is a green silicone ink that has a strong adhesion to other silicones and is dipersed in Xylene. It is designed to be used in application that require a rapid cure schedule and it provides a high capacity for single print applications. It is ideal as a marking ink on silicone parts as well as other components where the coating must demonstrate a long-term stability. 收起 | |
| R-2145 | NuSil Silicone Technology 1 | R1-2145 is an extremely tough gray silicone adhesive that does not require atmospheric moisture to cure and the product is available in easy to use, airless side by side kits that eliminate mixing and deairing. It rapidly cures at room temperature by appl...展开 R1-2145 is an extremely tough gray silicone adhesive that does not require atmospheric moisture to cure and the product is available in easy to use, airless side by side kits that eliminate mixing and deairing. It rapidly cures at room temperature by applying heat in an oven or a heat gun or lamp. This adhesive can be used for bonding and sealing silicones to each other and other substrates such as metals and plastics. It is ready for rapid production or prototyping due to the a rapid cure. 收起 | |
| R-3930 | NuSil Silicone Technology 1 | R-3930 is a one-part RTV silicone elastomer dispersed in tert butyl acetate and the slight addition of heat will accelerate the curing process. It is designed for spraying, dip casting, and RTV curing of thin elastomeric films. It can also be utilized for...展开 R-3930 is a one-part RTV silicone elastomer dispersed in tert butyl acetate and the slight addition of heat will accelerate the curing process. It is designed for spraying, dip casting, and RTV curing of thin elastomeric films. It can also be utilized for bonding, coating, and sealing applications that require solvent and/or fuel resistance. It bonds aggressively to most surfaces and can help minimize ice adhesion. 收起 | |
| R-3975 | NuSil Silicone Technology 1 | R-3975 is a one-part RTV silicone elastomer dispersed in tert butyl acetate and the slight addition of heat will accelerate the curing process. It can be utilized for bonding, coating, and sealing applications that require solvent and/or fuel resistance. ...展开 R-3975 is a one-part RTV silicone elastomer dispersed in tert butyl acetate and the slight addition of heat will accelerate the curing process. It can be utilized for bonding, coating, and sealing applications that require solvent and/or fuel resistance. It bonds aggressively to most surfaces and can help minimize ice adhesion. It is designed for spraying, dip casting, and RTV curing of thin elastomeric films. 收起 | |
| R1-2145 | NuSil Silicone Technology 1 | R1-2145 is an extremely tough gray silicone adhesive that rapidly cures at room temperature by applying heat in an oven or a heat gun or lamp. It does not require atmospheric moisture to cure and the product is available in easy to use, airless side by si...展开 R1-2145 is an extremely tough gray silicone adhesive that rapidly cures at room temperature by applying heat in an oven or a heat gun or lamp. It does not require atmospheric moisture to cure and the product is available in easy to use, airless side by side kits that eliminate mixing and deairing, This adhesive can be used for bonding and sealing silicones to each other and other substrates such as metals and plastics. It is ready for rapid production or prototyping due to the a rapid cure. 收起 | |
| R1-3930-11 | NuSil Silicone Technology 1 | R1-3930-11 is a gray fluorosilicone, adhesive, sealant, and coating that bonds aggressively to most surfaces. This product can be utilized for sealing, coating, and bonding applications that require solvent and/or fuel resistance. It can also be used for ...展开 R1-3930-11 is a gray fluorosilicone, adhesive, sealant, and coating that bonds aggressively to most surfaces. This product can be utilized for sealing, coating, and bonding applications that require solvent and/or fuel resistance. It can also be used for bonding or protecting hardware components exposed to gasoline or aviation fuels. It can be further dispersed for spraying applications. 收起 | |
| R3-2160 | NuSil Silicone Technology 1 | R3-2160 is a two-part, pourable silicone system that has a high tear strength and good physical properties. It is designed for enhance performance in extreme high and low temperatures. The ideal use for this high temperature adhesive/sealant is for pottin...展开 R3-2160 is a two-part, pourable silicone system that has a high tear strength and good physical properties. It is designed for enhance performance in extreme high and low temperatures. The ideal use for this high temperature adhesive/sealant is for potting connectors, seals and gaskets, molded high voltage terminals, and cable harness breakouts. 收起 | |
| R3-3930-11 | NuSil Silicone Technology 1 | R3-3930-11 is a gray, two-part, RTV silicone that can be further dispersed for spraying applications. It has strong physical attributes which make it bond aggressively to most surfaces. It can also be utilized in applications where coating, sealing, and ...展开 R3-3930-11 is a gray, two-part, RTV silicone that can be further dispersed for spraying applications. It has strong physical attributes which make it bond aggressively to most surfaces. It can also be utilized in applications where coating, sealing, and bonding are necessary for fuel and /or solvent resistance.This product can be used to bond or protect hardware components that are exposed to gasoline or aviation fuels. 收起 | |
| R31-2186 | NuSil Silicone Technology 1 | R31-2186 is a translucent, thixotropic, silicone adhesive that has a high tear strength and cures at room temperature, and rapidly with the addition of heat. The consistency of this product allows it to be supplied in easy-to-use, airless side-by-side kit...展开 R31-2186 is a translucent, thixotropic, silicone adhesive that has a high tear strength and cures at room temperature, and rapidly with the addition of heat. The consistency of this product allows it to be supplied in easy-to-use, airless side-by-side kits that remove the need to mix. It can be used as an adhesive for sealing and bonding silicones to each other and other substrates such as plastics and metals. 收起 | |
| R32-2186 | NuSil Silicone Technology 1 | R32-2186 is a two-part, translucent, thixotropic, high tear strength silicone adhesive that cures rapidly with the application of heat in an oven, or by a heat gun or lamp. It does not require atmospheric moisture to cure. This adhesive can be used for bo...展开 R32-2186 is a two-part, translucent, thixotropic, high tear strength silicone adhesive that cures rapidly with the application of heat in an oven, or by a heat gun or lamp. It does not require atmospheric moisture to cure. This adhesive can be used for bonding and sealing silicones to each other and other substrates such as metals and plastics. This product is ready for rapid production or prototyping due to its rapid cure rate. 收起 | |
| R33-2186 | NuSil Silicone Technology 1 | R33-2183 is a fast-curing silicone adhesive that cures at room temperature, or rapidly with the use of heat in an oven, or a heat gun lamp. It does not require atmospheric moisture to cure. This product can be used as an adhesive for sealing and bonding s...展开 R33-2183 is a fast-curing silicone adhesive that cures at room temperature, or rapidly with the use of heat in an oven, or a heat gun lamp. It does not require atmospheric moisture to cure. This product can be used as an adhesive for sealing and bonding silicones to each other and other substrates such as metals and plastics. It is best used for applications requiring an operating temperature range of –65°C to 240°C (-85 to 465°F). 收起 | |
| SCV-2590 | NuSil Silicone Technology 1 | SCV-2590 is a two-part, clear silicone elastomer that can be used as an adhesive in low strength applications such as solar cell arrays where clarity, and a low volatility are needed. In electronic and space applications it can prevent condensation from b...展开 SCV-2590 is a two-part, clear silicone elastomer that can be used as an adhesive in low strength applications such as solar cell arrays where clarity, and a low volatility are needed. In electronic and space applications it can prevent condensation from building in sensitive devices. This product also features Ultra Low OutgassingTM which exceeds specifications outlined in NASA and the European Space Agency. 收起 | |
| SCV-2590-2 | NuSil Silicone Technology 1 | SCV-2590-2 is a black silicone that has low viscosity and can be utilized as an adhesive in optical applications requiring a black material to block light. This product offers a broad operating temperature range and can be used to protect electronic assem...展开 SCV-2590-2 is a black silicone that has low viscosity and can be utilized as an adhesive in optical applications requiring a black material to block light. This product offers a broad operating temperature range and can be used to protect electronic assemblies from extreme temperatures, humidity and radiation. It also features Ultra Low OutgassingTM which makes it ideal to protect sensitive devices from condensation. 收起 | |
| SCV1-2590 | NuSil Silicone Technology 1 | SCV1-2590 is an optically clear silicone system with low viscosity and is a suitable adhesive in applications such as solar cell arrays, where clarity and low volatility are important. It can also be used in space and electric applications that require lo...展开 SCV1-2590 is an optically clear silicone system with low viscosity and is a suitable adhesive in applications such as solar cell arrays, where clarity and low volatility are important. It can also be used in space and electric applications that require low outgassing to avoid condensation in sensitive devices. 收起 | |
| SCV1-2596 | NuSil Silicone Technology 1 | SCV1-2596 is an electrically conductive silicone adhesive/sealant that features Ultra Low OutgassingTM. It can be utilized in applications that require minimal volatile condensables under extreme operating conditions. This product can also be used for RFI...展开 SCV1-2596 is an electrically conductive silicone adhesive/sealant that features Ultra Low OutgassingTM. It can be utilized in applications that require minimal volatile condensables under extreme operating conditions. This product can also be used for RFI and EMI shielding in electrical and space applications and is well suited to for form-in-place conductive gaskets. 收起 |
