| Mowinyl 7502 | Nippon Gohsei | Mowinyl 7502 is a water-based synthetic resin emulsion composed of a styrene/acrylic copolymer. With good elasticity and film thickening potential, this product is well suited for use in chip-resistant paints and coatings. | |
| Mowinyl 752 | Nippon Gohsei | Mowinyl 752 is a water-based synthetic resin emulsion composed of a styrene/acrylic copolymer. With good water and alkaline resistance, this product is well suited for use in slate roofing paint, sand-textured coating, and floor coating applications. | |
| Mowinyl 7525 | Nippon Gohsei | Mowinyl 7525 is a synthetic acrylic resin emulsion that provides good coloration and miscibility with pigments. This product is well suited for use in multi-colored paint and coating applications. | |
| Mowinyl 7720 | Nippon Gohsei | Mowinyl 7720 is a synthetic acrylic resin emulsion that provides good solvent resistance and miscibility with various agents. This product is well suited for use in interiors paint and coating applications. | |
| Mowinyl 7820 | Nippon Gohsei | Mowinyl 7820 is a synthetic acrylic resin emulsion that provides good solvent resistance and miscibility with various agents. This product is well suited for use in interior paint and coating applications. | |
| Mowinyl 801 | Nippon Gohsei | Mowinyl 801 is a water-based synthetic resin emulsion composed of a vinyl acetate/VeoVa copolymer. Featuring good miscibility with various agents, this product is well suited for use in heat-resistant paint and sand-textured coating applications. | |
| Mowinyl 8020 | Nippon Gohsei | Mowinyl 8020 is a water-based synthetic resin emulsion composed of an acrylic/colloidal silica copolymer. It provides good adherence to various substrates, low contamination, and good heat resistance. This product is well suited for use in corrosion-resis...展开 Mowinyl 8020 is a water-based synthetic resin emulsion composed of an acrylic/colloidal silica copolymer. It provides good adherence to various substrates, low contamination, and good heat resistance. This product is well suited for use in corrosion-resistant paints and coatings, clear coats, and gloss varnishes for paper. 收起 | |
| Mowinyl 8030 | Nippon Gohsei | Mowinyl 8030 is a water-based synthetic resin emulsion composed of an acrylic/colloidal silica copolymer. It provides good adherence to various substrates, low contamination, and good heat resistance. This product is well suited for use in corrosion-resis...展开 Mowinyl 8030 is a water-based synthetic resin emulsion composed of an acrylic/colloidal silica copolymer. It provides good adherence to various substrates, low contamination, and good heat resistance. This product is well suited for use in corrosion-resistant paints and coatings, clear coats, and gloss varnishes for paper. 收起 | |
| Mowinyl 880 | Nippon Gohsei | Mowinyl 880 is a water-based synthetic resin emulsion composed of a styrene/acrylic copolymer. Featuring good miscible stability with colloidal silica, this product is well suited for use in clear coat and sealer applications. | |
| Mowinyl 940 | Nippon Gohsei | Mowinyl 940 is a water-based synthetic resin emulsion composed of a styrene/acrylic copolymer. With good adherence to base materials, this product is well suited for use in primer and sealer applications. | |
| Mowinyl 972 | Nippon Gohsei | Mowinyl 972 is a water-based synthetic resin emulsion composed of a styrene/acrylic copolymer. Featuring a high glass transition temperature (Tg) and good antiblocking properties, this product is well suited for use in paint, coating, and printing toner a...展开 Mowinyl 972 is a water-based synthetic resin emulsion composed of a styrene/acrylic copolymer. Featuring a high glass transition temperature (Tg) and good antiblocking properties, this product is well suited for use in paint, coating, and printing toner applications. 收起 | |
| Mowinyl DM60 | Nippon Gohsei | Mowinyl DM60 is a water-based synthetic resin emulsion composed of a styrene/acrylic copolymer. With good elasticity and pigment mixing stability, this product is well suited for use in exterior paint and sand-textured coating applications. | |
| Mowinyl DM772 | Nippon Gohsei | Mowinyl DM772 is a synthetic acrylic resin emulsion that provides good adherence to various substrates. This product is well suited for use in clear coats and paints for pavement applications. | |
| Mowinyl DM774 | Nippon Gohsei | Mowinyl DM774 is a synthetic acrylic resin emulsion that provides good adherence to various substrates. This product is well suited for use in clear coat and floor coating applications. | |
| Mowinyl LDM6740 | Nippon Gohsei | Mowinyl LDM6740 is a water-based synthetic resin emulsion composed of a styrene/acrylic copolymer. With good pigment fixing strength and water resistance, this product is well suited for use in sand-textured coating applications. | |
| Mowinyl LDM7010 | Nippon Gohsei | Mowinyl LDM7010 is a synthetic acrylic resin emulsion with good alkaline viscosity and thickening properties. This product is well suited for use in paint and coating applications. | |
| Mowinyl LDM7156 | Nippon Gohsei | Mowinyl LDM7156 is a synthetic acrylic resin emulsion with an added auxiliary filming agent. Featuring high weather resistance, this product is well suited for use in exterior paint applications. | |
| Mowinyl LDM7512 | Nippon Gohsei | Mowinyl LDM7512 is a synthetic acrylic resin emulsion with low VOC content. This product is well suited for use in interior paint and coating applications. | |
| Mowinyl LDM7520 | Nippon Gohsei | Mowinyl LDM7520 is a synthetic acrylic resin emulsion featuring good pigment mixing stability, water resistance, and hardening properties. This product is well suited for use in sand-textured coating applications. | |
| Mowinyl LDM7522 | Nippon Gohsei | Mowinyl LDM7522 is a synthetic acrylic resin emulsion with low VOC content. This product is well suited for use in interior paint and coating applications. | |
| Mowinyl LDM7523 | Nippon Gohsei | Mowinyl LDM7523 is a water-based synthetic resin emulsion composed of an acrylic/silicone copolymer. Featuring high weather resistance, this product is well suited for use in exterior paint and coating applications. | |
| Mowinyl VDM7410 | Nippon Gohsei | Mowinyl VDM7410 is a water-based synthetic resin emulsion composed of a styrene/acrylic copolymer. With low VOC content, this product is well suited for use in interior and exterior paints and coatings. | |
| Nichigo-Polyester HR-0038 | Nippon Gohsei | Nichigo-Polyester HR-0038 is a high molecular weight saturated polyester resin that features a high refractive index and good heat and humidity resistance. This product is well suited for use in a wide variety of applications, including coatings and prime...展开 Nichigo-Polyester HR-0038 is a high molecular weight saturated polyester resin that features a high refractive index and good heat and humidity resistance. This product is well suited for use in a wide variety of applications, including coatings and primers, film and label adhesives, and printing paper applications. 收起 | |
| Nichigo-Polyester LP011 | Nippon Gohsei | Nichigo-Polyester LP011 is a high molecular weight saturated polyester resin that features good solution stability. This product is well suited for use in a wide variety of applications, including laminates and adhesives, inks, can and coil coatings, and ...展开 Nichigo-Polyester LP011 is a high molecular weight saturated polyester resin that features good solution stability. This product is well suited for use in a wide variety of applications, including laminates and adhesives, inks, can and coil coatings, and magnetic paints. 收起 | |
| Nichigo-Polyester LP033 | Nippon Gohsei | Nichigo-Polyester LP033 is a high molecular weight saturated polyester resin featuring good metal adhesion. This product is well suited for use in coatings, primers, laminates, and polyester adhesives. | |
| Nichigo-Polyester LP035 | Nippon Gohsei | Nichigo-Polyester LP035 is a high molecular weight saturated polyester resin featuring good weather and chemical resistance. This product is well suited for use in electronic and plastic coatings, laminates, polyester adhesives, and PVC backing applicatio...展开 Nichigo-Polyester LP035 is a high molecular weight saturated polyester resin featuring good weather and chemical resistance. This product is well suited for use in electronic and plastic coatings, laminates, polyester adhesives, and PVC backing applications. 收起 | |
| Nichigo-Polyester TP217 | Nippon Gohsei | Nichigo-Polyester TP217 is a high molecular weight saturated polyester resin featuring good workability. This product is well suited for use in general and electronic coating applications. | |
| Nichigo-Polyester TP219 | Nippon Gohsei | Nichigo-Polyester TP219 is a low molecular weight saturated polyester resin that is well suited for use in optical adhesives and general and electronic coating applications. | |
| Nichigo-Polyester TP220 | Nippon Gohsei | Nichigo-Polyester TP220 is a high molecular weight saturated polyester resin with a high glass transition temperature (Tg). This product is well suited for use in general and electronic coatings, adhesive films and labels, primers, optical and polyester a...展开 Nichigo-Polyester TP220 is a high molecular weight saturated polyester resin with a high glass transition temperature (Tg). This product is well suited for use in general and electronic coatings, adhesive films and labels, primers, optical and polyester adhesives, and PVC backing materials. 收起 | |
| Nichigo-Polyester TP235 | Nippon Gohsei | Nichigo-Polyester TP235 is a high molecular weight saturated polyester resin. It is formulated to have good adhesion with ultraviolet (UV) inks. This product is well suited for use in coatings and primers for plastics and electronics, film and label adhes...展开 Nichigo-Polyester TP235 is a high molecular weight saturated polyester resin. It is formulated to have good adhesion with ultraviolet (UV) inks. This product is well suited for use in coatings and primers for plastics and electronics, film and label adhesives, polyester adhesives, and PVC backing materials. 收起 | |
| Nichigo-Polyester TP236 | Nippon Gohsei | Nichigo-Polyester TP236 is a high molecular weight saturated polyester resin featuring good pigment dispersion. This product is well suited for use in plastic and electronic coatings and primers, adhesive films and labels, polyester adhesives, and PVC bac...展开 Nichigo-Polyester TP236 is a high molecular weight saturated polyester resin featuring good pigment dispersion. This product is well suited for use in plastic and electronic coatings and primers, adhesive films and labels, polyester adhesives, and PVC backing materials. 收起 | |
| Nichigo-Polyester TP249 | Nippon Gohsei | Nichigo-Polyester TP249 is a high molecular weight saturated polyester resin featuring good dispersibility of magnetic elements. This product is well suited for use in plastic and electronic coatings and optical adhesives. | |
| Nichigo-Polyester TP290 | Nippon Gohsei | Nichigo-Polyester TP290 is a high molecular weight saturated polyester resin featuring good staining properties. This product is well suited for use in general and electronic coating applications. | |
| Nichigo-Polyester W-0030 | Nippon Gohsei | Nichigo-Polyester W-0030 is a high molecular weight saturated polyester resin featuring a high acid value, good adhesion, and good heat and humidity resistance. This product is well suited for use in adhesive films and labels, plastic and electronic coati...展开 Nichigo-Polyester W-0030 is a high molecular weight saturated polyester resin featuring a high acid value, good adhesion, and good heat and humidity resistance. This product is well suited for use in adhesive films and labels, plastic and electronic coatings and primers, and optical adhesives. 收起 | |
| Nichigo-Polyester WR-901 | Nippon Gohsei | Nichigo-Polyester WR-901 is a high molecular weight saturated polyester resin featuring good heat and humidity resistance, as well as good ultraviolet (UV) ink printability. This product is well suited for use in optical adhesives, plastic and electronic ...展开 Nichigo-Polyester WR-901 is a high molecular weight saturated polyester resin featuring good heat and humidity resistance, as well as good ultraviolet (UV) ink printability. This product is well suited for use in optical adhesives, plastic and electronic coatings and primers, and adhesive films and labels. 收起 | |
| Nichigo-Polyester WR-905 | Nippon Gohsei | Nichigo-Polyester WR-905 is a high molecular weight saturated polyester resin featuring good solution stability and ultraviolet (UV) ink printability. This product is well suited for use in optical adhesives, plastic and electronic coatings and primers, a...展开 Nichigo-Polyester WR-905 is a high molecular weight saturated polyester resin featuring good solution stability and ultraviolet (UV) ink printability. This product is well suited for use in optical adhesives, plastic and electronic coatings and primers, and adhesive films and labels. 收起 | |
| Nichigo-Polyester WR-961 | Nippon Gohsei | Nichigo-Polyester WR-961 is a high molecular weight saturated polyester resin featuring good adhesion and humidity resistance. This product is well suited for use in optical adhesives, plastic and electronic coatings and primers, and adhesive films and la...展开 Nichigo-Polyester WR-961 is a high molecular weight saturated polyester resin featuring good adhesion and humidity resistance. This product is well suited for use in optical adhesives, plastic and electronic coatings and primers, and adhesive films and labels. 收起 | |
| Permanent Yellow 1301 | Emperor Pigment Co., Ltd. | Permanent Yellow 1301 is a pigment that is reddish yellow and transparent in color. It has a color index number of Pigment Yellow 13, a CAS number of 5102-83-0, and an EU number of 225-822-9. This product has a density value of 1.6, a pH value of 6.0 to 7...展开 Permanent Yellow 1301 is a pigment that is reddish yellow and transparent in color. It has a color index number of Pigment Yellow 13, a CAS number of 5102-83-0, and an EU number of 225-822-9. This product has a density value of 1.6, a pH value of 6.0 to 7.0, and is used in NC inks, PA inks, offset inks, and PP inks. 收起 | |
| Permanent Yellow 1401 | Emperor Pigment Co., Ltd. | Permanent Yellow 1401 is a pigment that is bright yellow in color. It has a color index number of Pigment Yellow 14, a CAS number of 5468-75-7, and an EU number of 226-789-3. This product has a density value of 1.6, a pH value of 6.0 to 7.0, and is used i...展开 Permanent Yellow 1401 is a pigment that is bright yellow in color. It has a color index number of Pigment Yellow 14, a CAS number of 5468-75-7, and an EU number of 226-789-3. This product has a density value of 1.6, a pH value of 6.0 to 7.0, and is used in PA inks, NC inks, and PP inks. 收起 | |
| Permanent Yellow 2G | Emperor Pigment Co., Ltd. | Permanent Yellow 2G is a pigment that is greenish yellow and transparent in color. It has a color index number of Pigment Yellow 17, a CAS number of 4531-49-1, and an EU number of 224-867-1. This product has a density value of 1.6, a pH value of 6.0 to 7....展开 Permanent Yellow 2G is a pigment that is greenish yellow and transparent in color. It has a color index number of Pigment Yellow 17, a CAS number of 4531-49-1, and an EU number of 224-867-1. This product has a density value of 1.6, a pH value of 6.0 to 7.0, and is used in offset inks. 收起 | |
| Permanent Yellow 2GS | Emperor Pigment Co., Ltd. | Permanent Yellow 2GS is a greenish yellow colored pigment that is used in offset inks, textile printing, and waterbased inks. It has a density value of 1.6 and a pH value of 6.0 to 7.0. This product has a color index number of Pigment Yellow 14, a CAS num...展开 Permanent Yellow 2GS is a greenish yellow colored pigment that is used in offset inks, textile printing, and waterbased inks. It has a density value of 1.6 and a pH value of 6.0 to 7.0. This product has a color index number of Pigment Yellow 14, a CAS number of 5468-75-7, and an EU number of 226-789-3. 收起 | |
| Permanent Yellow 5GX | Emperor Pigment Co., Ltd. | Permanent Yellow 5GX is a pigment that is bright yellow in color. It has a color index number of Pigment Yellow 74, a CAS number of 6358-31-2, and an EU number of 228-768-4. This product has a density value of 1.6, a pH value of 6.0 to 7.0, and is used in...展开 Permanent Yellow 5GX is a pigment that is bright yellow in color. It has a color index number of Pigment Yellow 74, a CAS number of 6358-31-2, and an EU number of 228-768-4. This product has a density value of 1.6, a pH value of 6.0 to 7.0, and is used in industrial paints, waterbased paints, and waterbased inks. 收起 | |
| Permanent Yellow G-W | Emperor Pigment Co., Ltd. | Permanent Yellow G-W is a bright yellow colored pigment that is used in waterbased inks and textile printing. It has a color index number of Pigment Yellow 14, a CAS number of 5468-75-7, and an EU number of 226-789-3. This product has a density value of 1...展开 Permanent Yellow G-W is a bright yellow colored pigment that is used in waterbased inks and textile printing. It has a color index number of Pigment Yellow 14, a CAS number of 5468-75-7, and an EU number of 226-789-3. This product has a density value of 1.6 and a pH value of 6.0 to 7.0. 收起 | |
| Permanent Yellow GR | Emperor Pigment Co., Ltd. | Permanent Yellow GR is a reddish yellow and semitransparent colored pigment that is used in offset inks, waterbased inks, and textile printing. It has a color index number of Pigment Yellow 13, a CAS number of 5102-83-0, and an EU number of 225-822-9. Thi...展开 Permanent Yellow GR is a reddish yellow and semitransparent colored pigment that is used in offset inks, waterbased inks, and textile printing. It has a color index number of Pigment Yellow 13, a CAS number of 5102-83-0, and an EU number of 225-822-9. This product has a density value of 1.5 and a pH value of 6.0 to 7.0. 收起 | |
| Permanent Yellow RN | Emperor Pigment Co., Ltd. | Permanent Yellow RN is a reddish yellow colored pigment that is used in industrial paints. It has a density value of 1.6 and a pH value of 6.0 to 7.0. This product has a color index number of Pigment Yellow 65, a CAS number of 6528-34-3, and an EU number ...展开 Permanent Yellow RN is a reddish yellow colored pigment that is used in industrial paints. It has a density value of 1.6 and a pH value of 6.0 to 7.0. This product has a color index number of Pigment Yellow 65, a CAS number of 6528-34-3, and an EU number of 229-419-9. 收起 | |
| Phthalo Blue BGSF | Emperor Pigment Co., Ltd. | Phthalo Blue BGSF is a pigment that is blue in color. It has a color index number of Pigment Blue 15:4, a heat resistance value of 250 degrees Celsius, and an oil absorption value of less than 35 grams per 100 grams. This product is used in inks and solve...展开 Phthalo Blue BGSF is a pigment that is blue in color. It has a color index number of Pigment Blue 15:4, a heat resistance value of 250 degrees Celsius, and an oil absorption value of less than 35 grams per 100 grams. This product is used in inks and solvent based paints. 收起 | |
| Pigment Blue 15:6 | Emperor Pigment Co., Ltd. | Pigment Blue 15:6 is a pigment that is blue in color. It has a color index number of Pigment Blue 15:6, and a CAS number of 147-14-8. This product has a density value of 1.4 to 1.6, an oil absorption value of 30 to 60 mL/100g, and is used in coatings and ...展开 Pigment Blue 15:6 is a pigment that is blue in color. It has a color index number of Pigment Blue 15:6, and a CAS number of 147-14-8. This product has a density value of 1.4 to 1.6, an oil absorption value of 30 to 60 mL/100g, and is used in coatings and paints. 收起 | |
| PSA-1170 | NuSil Silicone Technology 1 | PSA-1170 is a one-part, non-curing, pressure sensitive silicone adhesive that has a translucent appearance and a low viscosity. It can be used for temporarily adhering to various substrates such as silicone, glass, metals, and organic rubbers. PSA-1170 is...展开 PSA-1170 is a one-part, non-curing, pressure sensitive silicone adhesive that has a translucent appearance and a low viscosity. It can be used for temporarily adhering to various substrates such as silicone, glass, metals, and organic rubbers. PSA-1170 is supplied in flammable solvents so it needs to be handled cautiously. Allow solvent to evaporate before adhering or attaching adhesive-coated objects together. 收起 | |
| Quinacridone Violet | Emperor Pigment Co., Ltd. | Quinacridone Violet is a pigment that is violet in color. It has a color index number of Pigment Violet 19, a CAS number of 1047-16-1, and an EU number of 213-879-2. This product has a density value of 1.7, a pH value of 7, and is used in coloring printin...展开 Quinacridone Violet is a pigment that is violet in color. It has a color index number of Pigment Violet 19, a CAS number of 1047-16-1, and an EU number of 213-879-2. This product has a density value of 1.7, a pH value of 7, and is used in coloring printing inks, paints, and pigment printing. 收起 | |
| R-1008-0 | NuSil Silicone Technology 1 | R-1008-0 is a translucent, one part, flowable silicone elastomer dispersion that cures in 7 days at room temperature when exposed to atmospheric moisture. It can be used as a marking ink for silicone rubber parts and other components where the coating mus...展开 R-1008-0 is a translucent, one part, flowable silicone elastomer dispersion that cures in 7 days at room temperature when exposed to atmospheric moisture. It can be used as a marking ink for silicone rubber parts and other components where the coating must maintain long term stability. It is best used for applications that require an operating temperature of 65°C to 260°C (-85°F to 465°F). 收起 | |
| R-1008-1 | NuSil Silicone Technology 1 | R-1008-1 is a white, RTV silicone coating and marking ink that is a one part, flowable silicone elastomer dispersion and cures in 7 days at room temperature when exposed to atmospheric moisture. It is best used for applications that require an operating t...展开 R-1008-1 is a white, RTV silicone coating and marking ink that is a one part, flowable silicone elastomer dispersion and cures in 7 days at room temperature when exposed to atmospheric moisture. It is best used for applications that require an operating temperature of 65°C to 260°C (-85°F to 465°F).This product can be used as a marking ink for silicone rubber parts and other components where the coating must maintain long term stability. 收起 | |
| R-1008-2 | NuSil Silicone Technology 1 | R-1008-2 is a black RTV silicone coating and marking ink that is a one part, flowable silicone elastomer dispersion, and cures in 7 days at room temperature when exposed to atmospheric moisture. It is best used for applications that require an operating t...展开 R-1008-2 is a black RTV silicone coating and marking ink that is a one part, flowable silicone elastomer dispersion, and cures in 7 days at room temperature when exposed to atmospheric moisture. It is best used for applications that require an operating temperature of 65°C to 260°C (-85°F to 465°F).This product can be used on silicone rubber parts as a marking ink where the coating must maintain long term stability. 收起 | |
| R-1008-3 | NuSil Silicone Technology 1 | R-1008-3 is a red, non corrosive, flowable silicone elastomer dispersion that cures in 7 days at room temperature. This product is long lasting, and is used as a marking ink for silicone rubber parts as well as other components that require a coating with...展开 R-1008-3 is a red, non corrosive, flowable silicone elastomer dispersion that cures in 7 days at room temperature. This product is long lasting, and is used as a marking ink for silicone rubber parts as well as other components that require a coating with long term stability. 收起 | |
| R-1008-4 | NuSil Silicone Technology 1 | R-1008-4 is an orange, one part, flowable silicone elastomer dispersion that cures in 7 days at room temperature when exposed to atmospheric moisture. It can be used as a marking ink for silicone rubber parts and other components where the coating must ma...展开 R-1008-4 is an orange, one part, flowable silicone elastomer dispersion that cures in 7 days at room temperature when exposed to atmospheric moisture. It can be used as a marking ink for silicone rubber parts and other components where the coating must maintain long term stability. It is best used for applications that require an operating temperature of 65°C to 260°C (-85°F to 465°F). 收起 | |
| R-1008-5 | NuSil Silicone Technology 1 | R-1008-5 is a yellow, one part, flowable silicone elastomer dispersion that cures in 7 days at room temperature when exposed to atmospheric moisture. It can be used as a marking ink for silicone rubber parts and other components where the coating must mai...展开 R-1008-5 is a yellow, one part, flowable silicone elastomer dispersion that cures in 7 days at room temperature when exposed to atmospheric moisture. It can be used as a marking ink for silicone rubber parts and other components where the coating must maintain long term stability. It is best used for applications that require an operating temperature of 65°C to 260°C (-85°F to 465°F). 收起 | |
| R-1008-6 | NuSil Silicone Technology 1 | R-1008-6 is a green, one part, flowable silicone elastomer dispersion that cures in 7 days at room temperature when exposed to atmospheric moisture. It can be used as a marking ink for silicone rubber parts and other components where the coating must main...展开 R-1008-6 is a green, one part, flowable silicone elastomer dispersion that cures in 7 days at room temperature when exposed to atmospheric moisture. It can be used as a marking ink for silicone rubber parts and other components where the coating must maintain long term stability. It is best used for applications that require an operating temperature of 65°C to 260°C (-85°F to 465°F). 收起 | |
| R-1008-7 | NuSil Silicone Technology 1 | R-1008-7 is a blue, one part, flowable silicone elastomer dispersion that cures in 7 days at room temperature when exposed to atmospheric moisture. It can be used as a marking ink for silicone rubber parts and other components where the coating must maint...展开 R-1008-7 is a blue, one part, flowable silicone elastomer dispersion that cures in 7 days at room temperature when exposed to atmospheric moisture. It can be used as a marking ink for silicone rubber parts and other components where the coating must maintain long term stability. It is best used for applications that require an operating temperature of 65°C to 260°C (-85°F to 465°F). 收起 | |
| R-1008-8 | NuSil Silicone Technology 1 | R-1008-8 is a violet, one part, flowable silicone elastomer dispersion that cures in 7 days at room temperature when exposed to atmospheric moisture. It can be used as a marking ink for silicone rubber parts and other components where the coating must mai...展开 R-1008-8 is a violet, one part, flowable silicone elastomer dispersion that cures in 7 days at room temperature when exposed to atmospheric moisture. It can be used as a marking ink for silicone rubber parts and other components where the coating must maintain long term stability. It is best used for applications that require an operating temperature of 65°C to 260°C (-85°F to 465°F). 收起 | |
| R-1009 | NuSil Silicone Technology 1 | R-1009 is a high-strength, flowing, one-part RTV silicone rubber that is dispersed in VM&P Naphtha. It cures to a transparent film within 24 hours and has excellent release characteristics. This product can be used for making conformal bags that are used ...展开 R-1009 is a high-strength, flowing, one-part RTV silicone rubber that is dispersed in VM&P Naphtha. It cures to a transparent film within 24 hours and has excellent release characteristics. This product can be used for making conformal bags that are used in the manufacturing of composite parts. It also can be utilized as a protective coating to prevent corrosion and erosion of different surfaces in missiles, rockets, aircraft and launch equipment. 收起 | |
| R-1082 | NuSil Silicone Technology 1 | R-1082 is a one part, translucent RTV silicone elastomer that is dispersed in xylene. This product is specifically designed for spraying, dip casting, and room temperature curing of thin, elastomeric films. It is important to thoroughly mix the product ju...展开 R-1082 is a one part, translucent RTV silicone elastomer that is dispersed in xylene. This product is specifically designed for spraying, dip casting, and room temperature curing of thin, elastomeric films. It is important to thoroughly mix the product just prior to adding a solvent and to exercise care to prevent solvent loss during dearing. 收起 | |
| R-1130 | NuSil Silicone Technology 1 | R-1130 is a non-corrosive, rapid curing, nun-slumping RTV silicone adhesive that can be used as a coating for semi-conductors and integrated circuits. It can also be utilized as an adhesive/sealant for electrical wires, terminals, mounting resistors and ...展开 R-1130 is a non-corrosive, rapid curing, nun-slumping RTV silicone adhesive that can be used as a coating for semi-conductors and integrated circuits. It can also be utilized as an adhesive/sealant for electrical wires, terminals, mounting resistors and connectors. It is ideal for overhead or side wall applications due to its non-slumping characteristics. 收起 | |
| R-1140 | NuSil Silicone Technology 1 | R-1140 is a one part, translucent, non-slumping silicone adhesive that is supplied in ready to use Semco® cartridges. This product bonds aggressively to most surfaces including glass, ceramics, metals, natural and synthetic fibers, wood, painted surfaces ...展开 R-1140 is a one part, translucent, non-slumping silicone adhesive that is supplied in ready to use Semco® cartridges. This product bonds aggressively to most surfaces including glass, ceramics, metals, natural and synthetic fibers, wood, painted surfaces and other silicone rubbers. It is best used for applications that require an operating temperature rang of 65 to 240°C (-85 to 465°F). 收起 | |
| R-1182 | NuSil Silicone Technology 1 | R-1182 is a low coefficient of friction silicone coating and is cured with acetoxy. This product cures to a smooth silicone film that decreases the coefficient of friction (CoF) and increases abrasion resistance for moving, sliding, and rubbing parts. It ...展开 R-1182 is a low coefficient of friction silicone coating and is cured with acetoxy. This product cures to a smooth silicone film that decreases the coefficient of friction (CoF) and increases abrasion resistance for moving, sliding, and rubbing parts. It will provide a RTV, low friction coating on cured silicone substrates. For the best results this coating needs to be applied by spraying or dipping. 收起 | |
| R-1505 | NuSil Silicone Technology 1 | R-1505 is a non-corrosive, static dissipative RTV silicone that cures at room temperature to form a flexible, resilient, conductive bond or seal. It is best used for applications that require a non-corrosive adhesive/sealant. This product provides protect...展开 R-1505 is a non-corrosive, static dissipative RTV silicone that cures at room temperature to form a flexible, resilient, conductive bond or seal. It is best used for applications that require a non-corrosive adhesive/sealant. This product provides protection from extremes in humidity, temperature, radiation, thermal stress and mechanical stress. It can also be utilized as a shielding for RFI and EMI in electronic applications. 收起 | |
| R-2100-1 | NuSil Silicone Technology 1 | R-2100-1 is a white silicone ink that has a strong adhesion to other silicones and is dipersed in Xylene. It is designed to be used in application that require a rapid cure schedule and it provides a high capacity for single print applications. It is idea...展开 R-2100-1 is a white silicone ink that has a strong adhesion to other silicones and is dipersed in Xylene. It is designed to be used in application that require a rapid cure schedule and it provides a high capacity for single print applications. It is ideal as a marking ink on silicone parts as well as other components where the coating must demonstrate a long-term stability. 收起 | |
| R-2100-2 | NuSil Silicone Technology 1 | R-2100-2 is a black silicone ink that has a strong adhesion to other silicones and is dipersed in Xylene. It is designed to be used in application that require a rapid cure schedule and it provides a high capacity for single print applications. It is idea...展开 R-2100-2 is a black silicone ink that has a strong adhesion to other silicones and is dipersed in Xylene. It is designed to be used in application that require a rapid cure schedule and it provides a high capacity for single print applications. It is ideal as a marking ink on silicone parts as well as other components where the coating must demonstrate a long-term stability. 收起 | |
| R-2100-3 | NuSil Silicone Technology 1 | R-2100-3 is a red silicone ink that has a strong adhesion to other silicones and is dipersed in Xylene. It is designed to be used in application that require a rapid cure schedule and it provides a high capacity for single print applications. It is ideal ...展开 R-2100-3 is a red silicone ink that has a strong adhesion to other silicones and is dipersed in Xylene. It is designed to be used in application that require a rapid cure schedule and it provides a high capacity for single print applications. It is ideal as a marking ink on silicone parts as well as other components where the coating must demonstrate a long-term stability. 收起 | |
| R-2100-6 | NuSil Silicone Technology 1 | R-2100-6 is a green silicone ink that has a strong adhesion to other silicones and is dipersed in Xylene. It is designed to be used in application that require a rapid cure schedule and it provides a high capacity for single print applications. It is idea...展开 R-2100-6 is a green silicone ink that has a strong adhesion to other silicones and is dipersed in Xylene. It is designed to be used in application that require a rapid cure schedule and it provides a high capacity for single print applications. It is ideal as a marking ink on silicone parts as well as other components where the coating must demonstrate a long-term stability. 收起 | |
| R-2145 | NuSil Silicone Technology 1 | R1-2145 is an extremely tough gray silicone adhesive that does not require atmospheric moisture to cure and the product is available in easy to use, airless side by side kits that eliminate mixing and deairing. It rapidly cures at room temperature by appl...展开 R1-2145 is an extremely tough gray silicone adhesive that does not require atmospheric moisture to cure and the product is available in easy to use, airless side by side kits that eliminate mixing and deairing. It rapidly cures at room temperature by applying heat in an oven or a heat gun or lamp. This adhesive can be used for bonding and sealing silicones to each other and other substrates such as metals and plastics. It is ready for rapid production or prototyping due to the a rapid cure. 收起 | |
| R-2160 | NuSil Silicone Technology 1 | R-2160 is a two-part, red, pourable silicone system that cures at room temperature or rapidly with heat. This product has a high tear strength and good physical properties. It is ideal for use in potting connectors, cable harness breakouts, molded high vo...展开 R-2160 is a two-part, red, pourable silicone system that cures at room temperature or rapidly with heat. This product has a high tear strength and good physical properties. It is ideal for use in potting connectors, cable harness breakouts, molded high voltage terminals. seals and gaskets due to its high physical strength. It is best used for applications that require an operating temperature range of -65°C to 315°C (-85°F to 600°F). 收起 | |
| R-2165 | NuSil Silicone Technology 1 | R-2165 is a thermally conductive, silicone, potting elastomer that is pourable, self-leveling, and cures at room temperature. This product has enhanced thermal conductivity for removal of heat and improved reliability. It can be used in multiple applicati...展开 R-2165 is a thermally conductive, silicone, potting elastomer that is pourable, self-leveling, and cures at room temperature. This product has enhanced thermal conductivity for removal of heat and improved reliability. It can be used in multiple applications such as potting for sensors, relays, and other electronic components that require protection from vibration and other harsh environmental conditions. 收起 | |
| R-2175 | NuSil Silicone Technology 1 | R-2175 is a two-part, black, pourable, self-leveling silicone potting elastomer that cures at room temperature. The low viscosity of this product allows for the potting of complex geometries without entrapping air. It is thermally stable, flowable, and ha...展开 R-2175 is a two-part, black, pourable, self-leveling silicone potting elastomer that cures at room temperature. The low viscosity of this product allows for the potting of complex geometries without entrapping air. It is thermally stable, flowable, and has several applications which include potting for connectors, sensors, relays, power devices and other electronic components that require protection from shock, vibration and other environmental hazards. 收起 | |
| R-2180 | NuSil Silicone Technology 1 | R-2180 is a two-part silicone elastomer dispersed in xylene, and two medium viscosity parts of this product blend easily in a 1:1 ratio (Part A:B). This ice phobic coating is an ideal product to use for dip casting and heat-curing of thin elastomeric fil...展开 R-2180 is a two-part silicone elastomer dispersed in xylene, and two medium viscosity parts of this product blend easily in a 1:1 ratio (Part A:B). This ice phobic coating is an ideal product to use for dip casting and heat-curing of thin elastomeric films. It can also be used as a coating to protect certain components from ice adhesion. 收起 | |
| R-2180-2 | NuSil Silicone Technology 1 | R-2180-2 is a two-part silicone elastomer dispersed in xylene and two medium viscosity parts of this product blend easily in a 1:1 ratio (Part A:B). This coating is an ideal product to use for dip casting and heat-curing of thin elastomeric films. It tak...展开 R-2180-2 is a two-part silicone elastomer dispersed in xylene and two medium viscosity parts of this product blend easily in a 1:1 ratio (Part A:B). This coating is an ideal product to use for dip casting and heat-curing of thin elastomeric films. It takes a minimum of 30 minutes to cure at an ambient temperature and humidity: 45 minutes @ 75°C (167°F), and 135 minutes @ 150°C (302°F). 收起 | |
| R-2182 | NuSil Silicone Technology 1 | R-2182 is a low coefficient of friction silicone coating that cures to a smooth film that decreases the friction and increases abrasion resistance for moving, sliding, and rubbing parts. It provides a heat-cured, low friction coating on cured silicone sub...展开 R-2182 is a low coefficient of friction silicone coating that cures to a smooth film that decreases the friction and increases abrasion resistance for moving, sliding, and rubbing parts. It provides a heat-cured, low friction coating on cured silicone substrates and results in a reduction of surface tack. It is best to apply by spraying or dipping. 收起 | |
| R-2188 | NuSil Silicone Technology 1 | R-2188 is a silicone potting and encapsulating elastomer that is pourable, self-leveling, and cures at room temperature. This product is ideal for the encapsulating, potting and coating of modules, relays, and a variety of AC/DC converters including high ...展开 R-2188 is a silicone potting and encapsulating elastomer that is pourable, self-leveling, and cures at room temperature. This product is ideal for the encapsulating, potting and coating of modules, relays, and a variety of AC/DC converters including high power and planar packages. It can help protect against shock, vibration, moisture, contaminants and dust. The low viscosity of this elastomer will allow the potting of complex geometries, and it will not trap air. 收起 | |
| R-2370 | NuSil Silicone Technology 1 | R-2370 is a two-part, RTV silicone rubber foam that has a 100:6 Mix Ratio (Base: Catalyst). It yields a low density silicone rubber foam when catalyzed. It is best utilized in shock and vibration dampening situations that require a flexible, light weight ...展开 R-2370 is a two-part, RTV silicone rubber foam that has a 100:6 Mix Ratio (Base: Catalyst). It yields a low density silicone rubber foam when catalyzed. It is best utilized in shock and vibration dampening situations that require a flexible, light weight foam with exceptional electrical and thermal properties. 收起 | |
| R-2380 | NuSil Silicone Technology 1 | R-2380 is a two-part, RTV silicone rubber foam that yields a medium density, and has a 100:6 Mix Ratio (Base: Catalyst). This product is specifically designed to be used in vibration and shock dampening situations that require a lightweight, flexible foam...展开 R-2380 is a two-part, RTV silicone rubber foam that yields a medium density, and has a 100:6 Mix Ratio (Base: Catalyst). This product is specifically designed to be used in vibration and shock dampening situations that require a lightweight, flexible foam that also has exceptional thermal and electrical properties. 收起 | |
| R-2550 | NuSil Silicone Technology 1 | R-2550 is a translucent RTV silicone elastomer has a wide service temperature range. It can be utilized as a heat shielding material for potting, sealing and bonding applications. This product will also be useful in aerospace applications for ablative coa...展开 R-2550 is a translucent RTV silicone elastomer has a wide service temperature range. It can be utilized as a heat shielding material for potting, sealing and bonding applications. This product will also be useful in aerospace applications for ablative coatings that require a material that pours. It can withstand extreme temperatures, operating in a range of -115 to 260°C (-178 to 500°F). 收起 | |
| R-2560 | NuSil Silicone Technology 1 | R-2560 is a two part, pourable, red RTV silicone elastomer that has a base of dimethyl diphenyl silicone copolymer. It can withstand extreme temperatures and can be used for applications that require an operating temperature range of 115°C to 260°C (-175°...展开 R-2560 is a two part, pourable, red RTV silicone elastomer that has a base of dimethyl diphenyl silicone copolymer. It can withstand extreme temperatures and can be used for applications that require an operating temperature range of 115°C to 260°C (-175°F to 500°F). This product can be used for thermal insulating as a firewall sealant, or as an ablative coating in missiles, rockets, aircraft and launch equipment. 收起 | |
| R-2630 | NuSil Silicone Technology 1 | R-2630 is a black, electrically conductive RTV silicone that has a high durometer. It is based on a methyl silicone polymer and has a broad temperature range. This product can be used to adhere covers on housings or where grooves or other configurations r...展开 R-2630 is a black, electrically conductive RTV silicone that has a high durometer. It is based on a methyl silicone polymer and has a broad temperature range. This product can be used to adhere covers on housings or where grooves or other configurations require a flowable to limited flow material with a low viscosity. It can also be used for RFI and EMI shielding for space and electrical applications. It is well suited for formed in place conductive gaskets and has an operating temperature range of 65°C to 200°C (-85°F to 392°F). 收起 | |
| R-2631 | NuSil Silicone Technology 1 | R-2631 is a two-part, black, static dissipative RTV silicone that has a base of methyl silicone polymer. It can provide protection from humidity, radiation, mechanical and thermal stress. This product can also act as an adhesive to bond covers on housings...展开 R-2631 is a two-part, black, static dissipative RTV silicone that has a base of methyl silicone polymer. It can provide protection from humidity, radiation, mechanical and thermal stress. This product can also act as an adhesive to bond covers on housings or where grooves or other configurations require a flowable to limited flow material with a moderate extrusion rate. It is excellent for formed-in-place conductive gaskets and can provide shielding for RFI and EMI in industrial applications. 收起 | |
| R-2634 | NuSil Silicone Technology 1 | R-2634 is a two-part, electrically conductive RTV silicone that is designed for enhanced performance in extreme high and low temperatures. It can be used as an adhesive to bond covers on housings or where grooves and other configurations require a non-flo...展开 R-2634 is a two-part, electrically conductive RTV silicone that is designed for enhanced performance in extreme high and low temperatures. It can be used as an adhesive to bond covers on housings or where grooves and other configurations require a non-flowable material. This product is especially useful for sealing formed-in-place conductive gaskets and grounding connections. It can also be used for EMI and RFI shielding for aerospace and electrical applications. 收起 | |
| R-2637 | NuSil Silicone Technology 1 | R-2637 is a tan, electrically conductive RTV silicone that is designed to cure at room temperature and more rapidly at elevated temperatures. It can be used for RFI and EMI shielding for aerospace applications. This product is excellent for formed-in-plac...展开 R-2637 is a tan, electrically conductive RTV silicone that is designed to cure at room temperature and more rapidly at elevated temperatures. It can be used for RFI and EMI shielding for aerospace applications. This product is excellent for formed-in-place conductive grounding connections and gaskets. It can also be used to adhere covers on housings that require a non-flowable to limited flow material. 收起 | |
| R-2655 | NuSil Silicone Technology 1 | R-2655 is a high strength, transparent RTV silicone elastomer that has a low viscosity and an accelerated cure rate when heat is added. This product can be used to provide environmental protection in potting, encapsulating and coating applications where r...展开 R-2655 is a high strength, transparent RTV silicone elastomer that has a low viscosity and an accelerated cure rate when heat is added. This product can be used to provide environmental protection in potting, encapsulating and coating applications where radiation resistance, low temperature flexibility, oxidation and thermal stability are needed. The low viscosity of this elastomer allows for easy flow around complex parts and it provides exceptional shock and electrical insulation resistance. 收起 | |
| R-2682-12 | NuSil Silicone Technology 1 | R-2682-12 is a RTV silicone film adhesive that cures at room temperature, or rapidly with heat from in an oven or with a heating lamp. It can be used for bonding or sealing silicone elastomers and some metals or plastic. This product can also be used for ...展开 R-2682-12 is a RTV silicone film adhesive that cures at room temperature, or rapidly with heat from in an oven or with a heating lamp. It can be used for bonding or sealing silicone elastomers and some metals or plastic. This product can also be used for applications that would require shorter processing times, easy clean-up, and consistent bond thickness. 收起 | |
| R-2930 | NuSil Silicone Technology 1 | R-2930 is a two-part, white, thermally conductive silicone that cures rapidly with the addition of heat. This product can be used as an adhesive for integrated circuit substrates, heat sinks, base plates or where grooves or other configurations require a ...展开 R-2930 is a two-part, white, thermally conductive silicone that cures rapidly with the addition of heat. This product can be used as an adhesive for integrated circuit substrates, heat sinks, base plates or where grooves or other configurations require a non-flowable to limited flow material. It can also provide the transfer of heat between electrical/electronic components and their heat sinks. 收起 | |
| R-2939 | NuSil Silicone Technology 1 | R-2939 is a two-part, white, pourable, thermally conductive silicone that has a low viscosity and cures rapidly with the addition of heat. It can provide the transfer of heat between electrical/electronic components and their heat sinks. This product is i...展开 R-2939 is a two-part, white, pourable, thermally conductive silicone that has a low viscosity and cures rapidly with the addition of heat. It can provide the transfer of heat between electrical/electronic components and their heat sinks. This product is ideally used as an adhesive for openings in modules and housings where grooves or other configurations require a non-flowable to limited flow material. 收起 | |
| R-2940 | NuSil Silicone Technology 1 | R-2940 is a thermally conductive silicone that has a high strength that can be cured rapidly with the addition of heat. It can be used to adhere base plates, integrated circuit substrates, heat sinks, and other configurations that require a material that ...展开 R-2940 is a thermally conductive silicone that has a high strength that can be cured rapidly with the addition of heat. It can be used to adhere base plates, integrated circuit substrates, heat sinks, and other configurations that require a material that is non-flowable to a limited flow. It can also be used to provide heat transfer between electrical/electronic components and their heat sinks. 收起 | |
| R-2949 | NuSil Silicone Technology 1 | R-2949 is a two-part, white, thermally conductive silicone that can cure rapidly with the addition of heat. It is an ideal product to be used in applications that require protection against extreme low and high temperatures. It can be used as an adhesive ...展开 R-2949 is a two-part, white, thermally conductive silicone that can cure rapidly with the addition of heat. It is an ideal product to be used in applications that require protection against extreme low and high temperatures. It can be used as an adhesive to bond openings in housings and modules where grooves or other configurations require a limited flow material with moderate thermal conductivity. It can also provide the transfer of heat between electrical components and their heat sinks. 收起 | |
| R-3930 | NuSil Silicone Technology 1 | R-3930 is a one-part RTV silicone elastomer dispersed in tert butyl acetate and the slight addition of heat will accelerate the curing process. It is designed for spraying, dip casting, and RTV curing of thin elastomeric films. It can also be utilized for...展开 R-3930 is a one-part RTV silicone elastomer dispersed in tert butyl acetate and the slight addition of heat will accelerate the curing process. It is designed for spraying, dip casting, and RTV curing of thin elastomeric films. It can also be utilized for bonding, coating, and sealing applications that require solvent and/or fuel resistance. It bonds aggressively to most surfaces and can help minimize ice adhesion. 收起 | |
| R-3975 | NuSil Silicone Technology 1 | R-3975 is a one-part RTV silicone elastomer dispersed in tert butyl acetate and the slight addition of heat will accelerate the curing process. It can be utilized for bonding, coating, and sealing applications that require solvent and/or fuel resistance. ...展开 R-3975 is a one-part RTV silicone elastomer dispersed in tert butyl acetate and the slight addition of heat will accelerate the curing process. It can be utilized for bonding, coating, and sealing applications that require solvent and/or fuel resistance. It bonds aggressively to most surfaces and can help minimize ice adhesion. It is designed for spraying, dip casting, and RTV curing of thin elastomeric films. 收起 | |
| R1-2145 | NuSil Silicone Technology 1 | R1-2145 is an extremely tough gray silicone adhesive that rapidly cures at room temperature by applying heat in an oven or a heat gun or lamp. It does not require atmospheric moisture to cure and the product is available in easy to use, airless side by si...展开 R1-2145 is an extremely tough gray silicone adhesive that rapidly cures at room temperature by applying heat in an oven or a heat gun or lamp. It does not require atmospheric moisture to cure and the product is available in easy to use, airless side by side kits that eliminate mixing and deairing, This adhesive can be used for bonding and sealing silicones to each other and other substrates such as metals and plastics. It is ready for rapid production or prototyping due to the a rapid cure. 收起 | |
| R1-3930-11 | NuSil Silicone Technology 1 | R1-3930-11 is a gray fluorosilicone, adhesive, sealant, and coating that bonds aggressively to most surfaces. This product can be utilized for sealing, coating, and bonding applications that require solvent and/or fuel resistance. It can also be used for ...展开 R1-3930-11 is a gray fluorosilicone, adhesive, sealant, and coating that bonds aggressively to most surfaces. This product can be utilized for sealing, coating, and bonding applications that require solvent and/or fuel resistance. It can also be used for bonding or protecting hardware components exposed to gasoline or aviation fuels. It can be further dispersed for spraying applications. 收起 | |
| R2-3930-11 | NuSil Silicone Technology 1 | R2-3930-11 is a gray, two-part, RTV silicone that can be further dispersed for spraying applications. This product can be used to bond or protect hardware components that are exposed to aviation fuels or gasoline. It can also be utilized in applications w...展开 R2-3930-11 is a gray, two-part, RTV silicone that can be further dispersed for spraying applications. This product can be used to bond or protect hardware components that are exposed to aviation fuels or gasoline. It can also be utilized in applications where coating, sealing, and bonding are necessary for fuel and /or solvent resistance. It has strong physical attributes which make it bond aggressively to most surfaces. 收起 | |
| R21-2615 | NuSil Silicone Technology 1 | R21-2615 is a high durometer silicone elastomer that is flowable and optically clear. This product can be used in any application that requires a high durometer, flowable material. It can be used to encapsulating and potting electronic devices and for mak...展开 R21-2615 is a high durometer silicone elastomer that is flowable and optically clear. This product can be used in any application that requires a high durometer, flowable material. It can be used to encapsulating and potting electronic devices and for making molded parts. 收起 | |
| R3-1075 | NuSil Silicone Technology 1 | R3-1075 is a one part, RTV silicone dispersion that has a non-corrosive cure. This product can be used as a protective coating that will prevent erosion and corrosion of various parts and surfaces in rockets, missiles, aircraft and launch equipment. It ca...展开 R3-1075 is a one part, RTV silicone dispersion that has a non-corrosive cure. This product can be used as a protective coating that will prevent erosion and corrosion of various parts and surfaces in rockets, missiles, aircraft and launch equipment. It can also be utilized as a conformal coating for electrical and electronic components including rigid and flexible printed circuit boards. 收起 | |
| R3-2160 | NuSil Silicone Technology 1 | R3-2160 is a two-part, pourable silicone system that has a high tear strength and good physical properties. It is designed for enhance performance in extreme high and low temperatures. The ideal use for this high temperature adhesive/sealant is for pottin...展开 R3-2160 is a two-part, pourable silicone system that has a high tear strength and good physical properties. It is designed for enhance performance in extreme high and low temperatures. The ideal use for this high temperature adhesive/sealant is for potting connectors, seals and gaskets, molded high voltage terminals, and cable harness breakouts. 收起 | |
| R3-3930-11 | NuSil Silicone Technology 1 | R3-3930-11 is a gray, two-part, RTV silicone that can be further dispersed for spraying applications. It has strong physical attributes which make it bond aggressively to most surfaces. It can also be utilized in applications where coating, sealing, and ...展开 R3-3930-11 is a gray, two-part, RTV silicone that can be further dispersed for spraying applications. It has strong physical attributes which make it bond aggressively to most surfaces. It can also be utilized in applications where coating, sealing, and bonding are necessary for fuel and /or solvent resistance.This product can be used to bond or protect hardware components that are exposed to gasoline or aviation fuels. 收起 | |
| R31-2186 | NuSil Silicone Technology 1 | R31-2186 is a translucent, thixotropic, silicone adhesive that has a high tear strength and cures at room temperature, and rapidly with the addition of heat. The consistency of this product allows it to be supplied in easy-to-use, airless side-by-side kit...展开 R31-2186 is a translucent, thixotropic, silicone adhesive that has a high tear strength and cures at room temperature, and rapidly with the addition of heat. The consistency of this product allows it to be supplied in easy-to-use, airless side-by-side kits that remove the need to mix. It can be used as an adhesive for sealing and bonding silicones to each other and other substrates such as plastics and metals. 收起 |
