| CF1-141 | NuSil Silicone Technology 1 | CF1-141 is a high technology silicone primer that is specially formulated to be used with platinum-cured systems and is colored red to provide an easy visual determination of surface coverage. It is a lower Volatile Organic Component (VOC) product and air...展开 CF1-141 is a high technology silicone primer that is specially formulated to be used with platinum-cured systems and is colored red to provide an easy visual determination of surface coverage. It is a lower Volatile Organic Component (VOC) product and air dries. This primer improves adhesion of addition-cured systems to various substrates such as glass, metals, plastics, ceramics and other silicone materials. 收起 | |
| CF1-3800 | NuSil Silicone Technology 1 | CF1-3800 is a thermally conductive, fluorosilicone elastomer that cures at room temperature, or rapidly with the addition of heat. It can be used to adhere covers on housings, modules, and other configurations that require a non-flowable material. This pr...展开 CF1-3800 is a thermally conductive, fluorosilicone elastomer that cures at room temperature, or rapidly with the addition of heat. It can be used to adhere covers on housings, modules, and other configurations that require a non-flowable material. This product can also be utilized as an adhesive, sealant or molding material when solvent resistance is needed. It can provide the transfer of heat between electrical components and heat sinks, and can operate at a temperature range of -65°C to 225°C (-85°F to 437°F). 收起 | |
| CF2-135 | NuSil Silicone Technology 1 | CF2-135 is a silicone primer that is specifically designed to be used with platinum-cured systems where conventional primers will not be sufficient. This product will help to improve the adhesion of addition-cured systems to various substrates such as woo...展开 CF2-135 is a silicone primer that is specifically designed to be used with platinum-cured systems where conventional primers will not be sufficient. This product will help to improve the adhesion of addition-cured systems to various substrates such as wood, metals, ceramics, plastics, and other silicone materials. For the best bonding results, be sure that the surface being primed is clean and degreased. 收起 | |
| CF5-3521-2 | NuSil Silicone Technology 1 | CF5-3521-2 is a two part, 50 mole % fluorosilicone that has a 1:1 Mix Ratio (Part A:B). It can be cured at room temperature, or more rapidly by heating it in an oven or with a heating lamp. The product is especially useful as a coating, sealant, adhesive ...展开 CF5-3521-2 is a two part, 50 mole % fluorosilicone that has a 1:1 Mix Ratio (Part A:B). It can be cured at room temperature, or more rapidly by heating it in an oven or with a heating lamp. The product is especially useful as a coating, sealant, adhesive or molding material in applications that require solvent resistance. 收起 | |
| CF6-135 | NuSil Silicone Technology 1 | CF6-135 is a one-component, high technology silicone primer that is translucent to preserve visibility with translucent products. It is specially designed to be used with platinum cured systems where conventional primers are insufficient. This product wil...展开 CF6-135 is a one-component, high technology silicone primer that is translucent to preserve visibility with translucent products. It is specially designed to be used with platinum cured systems where conventional primers are insufficient. This product will improve the adhesion of addition-cured systems to many different substrates such as glass, metals, plastics, ceramics and other silicone material. 收起 | |
| CV-1161 | NuSil Silicone Technology 1 | CV-1161 is a pressure sensitive silicone adhesive that retains its adhesive qualities in the presence of minor liquid and particulate contaminants. It can be used in applications that require low outgassing and minimal volatile condesable materials. This ...展开 CV-1161 is a pressure sensitive silicone adhesive that retains its adhesive qualities in the presence of minor liquid and particulate contaminants. It can be used in applications that require low outgassing and minimal volatile condesable materials. This product is ideal for adhering and bonding silicone elastomers, metals, paper, glass, fabric organics rubbers, some synthetics, and films such as polyester or kapton. 收起 | |
| CV-1500 | NuSil Silicone Technology 1 | CV-1500 is a one part, black, electrically conductive RTV silicone adhesive/sealant that can be used for RFI and EMI shielding in electrical and space applications that require static dissipation. It can also protect components from extremes in temperatur...展开 CV-1500 is a one part, black, electrically conductive RTV silicone adhesive/sealant that can be used for RFI and EMI shielding in electrical and space applications that require static dissipation. It can also protect components from extremes in temperature, humidity, radiation, thermal and mechanical stress. This adhesive is well suited for form-in-place conductive gaskets and attaching heating coils to solar collector plates. 收起 | |
| CV-2500 | NuSil Silicone Technology 1 | CV-2500 is a strong silicone based adhesive that is made to handle extreme conditions in space applications including condensation, humidity, radiation, and both mechanical and thermal stress. It can also be an adhesive in applications that involve solar ...展开 CV-2500 is a strong silicone based adhesive that is made to handle extreme conditions in space applications including condensation, humidity, radiation, and both mechanical and thermal stress. It can also be an adhesive in applications that involve solar cell arrays where clarity and low volatility is needed. 收起 | |
| CV-2566 | NuSil Silicone Technology 1 | CV-2566 is a flowable silicone adhesive that has a broad operating temperature range. The primary use for this product is to be used for applications that require low outgassing and helps eliminate condensation in sensitive devices. In space and electroni...展开 CV-2566 is a flowable silicone adhesive that has a broad operating temperature range. The primary use for this product is to be used for applications that require low outgassing and helps eliminate condensation in sensitive devices. In space and electronic applications, it can be utilized as a sealant or adhesive to help control high vacuum environments. 收起 | |
| CV-2567 | NuSil Silicone Technology 1 | CV-2567 is a pourable RTV siicone that can be used as a diluent for reducing the viscosity of other controlled volatility silicones. This product meets the ASTM 595 low outgas specifications outlined in NASA and the European Space Agency. It can be used a...展开 CV-2567 is a pourable RTV siicone that can be used as a diluent for reducing the viscosity of other controlled volatility silicones. This product meets the ASTM 595 low outgas specifications outlined in NASA and the European Space Agency. It can be used as an adhesive or sealant for electronic and space applications. 收起 | |
| CV-2568 | NuSil Silicone Technology 1 | CV-2568 is a thixotropic RTV silicone that has a low density and has controlled volatility. This product act as a bonding or sealant in space applications. It has a broad operating temperature range and can provide radiation resistance, oxidation and ther...展开 CV-2568 is a thixotropic RTV silicone that has a low density and has controlled volatility. This product act as a bonding or sealant in space applications. It has a broad operating temperature range and can provide radiation resistance, oxidation and thermal stability. It can also be utilized in applications that require low outgassing under extreme operating conditions. 收起 | |
| CV-2900 | NuSil Silicone Technology 1 | CV-2900 is a non-corrosive silicone adhesive that is designed for enhanced performance in extreme low and high temperatures. It can be used as a bond and sealant for applications such as overhead or vertical joints that require a non-slumping and one-part...展开 CV-2900 is a non-corrosive silicone adhesive that is designed for enhanced performance in extreme low and high temperatures. It can be used as a bond and sealant for applications such as overhead or vertical joints that require a non-slumping and one-part material. It can also be utilized as an adhesive , caulking or potting material in electronics/space applications that require minimal outgassing and provides protection from condensation in sensitive devices. 收起 | |
| CV-2943 | NuSil Silicone Technology 1 | CV-2943 is a thermally conductive RTV silicone that has controlled volatility and is designed for enhanced performance in extreme high or low temperatures. It can be used for applications that require low outgassing and minimal volatile condensables under...展开 CV-2943 is a thermally conductive RTV silicone that has controlled volatility and is designed for enhanced performance in extreme high or low temperatures. It can be used for applications that require low outgassing and minimal volatile condensables under extreme operating conditions. This product is also utilized as an adhesive for openings in housings or modules where grooves and other configurations require a limited flow material. 收起 | |
| CV2-1142 | NuSil Silicone Technology 1 | CV2-1142 is a non-corrosive, non-slumping, translucent RTV silicone adhesive/sealant that has controlled volatility. It can be used in applications that require low outgassing under extreme operating conditions. This product is useful for sealing and bond...展开 CV2-1142 is a non-corrosive, non-slumping, translucent RTV silicone adhesive/sealant that has controlled volatility. It can be used in applications that require low outgassing under extreme operating conditions. This product is useful for sealing and bonding in applications such as overhead or vertical joints that require a non-slumping, one-part material. It can also be utilized as a sealant, caulking, adhesive or potting material in space and electrical applications that require minimal outgassing. 收起 | |
| CV2-1161 | NuSil Silicone Technology 1 | CV2-1161 is a pressure sensitive silicone adhesive that retains its adhesive qualities in the presence of minor liquid particulate contaminants. It is able to withstand normal pressure variations as well as high temperature exposure. This product is ideal...展开 CV2-1161 is a pressure sensitive silicone adhesive that retains its adhesive qualities in the presence of minor liquid particulate contaminants. It is able to withstand normal pressure variations as well as high temperature exposure. This product is ideal for bonding and adhering silicone elastomers, paper, metals, glass, fabric, films, and some synthetics. It can also be used for applications that require low outgassing and minimal volatile condensable materials. 收起 | |
| CV3-2500 | NuSil Silicone Technology 1 | CV3-2500 is an optically clear silicone that is has controlled volatility. It is an ideal product for applications that require a low viscosity to create a superior flow and low outgassing. This is how it helps keep condensation from affecting sensitive d...展开 CV3-2500 is an optically clear silicone that is has controlled volatility. It is an ideal product for applications that require a low viscosity to create a superior flow and low outgassing. This is how it helps keep condensation from affecting sensitive devices. It can also be utilized as an adhesive for projects involving solar arrays. 收起 | |
| CV4-1161-5 | NuSil Silicone Technology 1 | CV4-1161-5 is a one-part, double-sided pressure sensitive adhesive tape that is best used to adhere and bond metals, paper, glass, fabric, organic rubbers, synthetics and films. It has the ability to collect dust in and around sensitive electronic compone...展开 CV4-1161-5 is a one-part, double-sided pressure sensitive adhesive tape that is best used to adhere and bond metals, paper, glass, fabric, organic rubbers, synthetics and films. It has the ability to collect dust in and around sensitive electronic components and is designed to withstand extreme temperature/pressure variations. 收起 | |
| CV4-2289-1 | NuSil Silicone Technology 1 | CV4-2289-1 is a thixotropic silicone elastomer that can be used as an adhesive that offers superior tear strength. This silicone also demonstrates flexibility at extremely low temperatures with a stiffening temperature of approximately -115°C. It can be u...展开 CV4-2289-1 is a thixotropic silicone elastomer that can be used as an adhesive that offers superior tear strength. This silicone also demonstrates flexibility at extremely low temperatures with a stiffening temperature of approximately -115°C. It can be used to protect electronic components, cable harness breakouts, seals, and gaskets from harsh environmental conditions. 收起 | |
| CV7-1142-1 | NuSil Silicone Technology 1 | CV7-1142-1 is a non corrosive material that has a white color and it is a non-slumping silicone RTV. It can be used as a caulking, adhesive or sealant that protects sensitive circuits, connectors and switches in space applications. This product has a broa...展开 CV7-1142-1 is a non corrosive material that has a white color and it is a non-slumping silicone RTV. It can be used as a caulking, adhesive or sealant that protects sensitive circuits, connectors and switches in space applications. This product has a broad operating temperature range so it can withstand hot and cold conditions. It also can be used for sealing openings in modules or housings where grooves or other configurations require a non-flowable to limited flow material. 收起 | |
| Deco-Coat DC-2501R | Epoxies, Etc. | Deco-Coat DC-2501R is a two part, high gloss, epoxy resin that forms a hard enamel "bubble free" finish. It is solvent- and odor-free, produces a tough, durable coating, and displays excellent adhesion. This product is ideal for applications such as costu...展开 Deco-Coat DC-2501R is a two part, high gloss, epoxy resin that forms a hard enamel "bubble free" finish. It is solvent- and odor-free, produces a tough, durable coating, and displays excellent adhesion. This product is ideal for applications such as costume and fashion jewelry, decals, labels, pins, emblems, and wooden floors and tables. 收起 | |
| Deco-Coat DC-2510 | Epoxies, Etc. | Deco-Coat DC-2510 is an ultra clear, two part, rigid epoxy doming resin. It is a low viscosity formulation with UV stabilizers and other additives which helps prevent premature yellowing and degradation. It will cure at room temperature or may be accelera...展开 Deco-Coat DC-2510 is an ultra clear, two part, rigid epoxy doming resin. It is a low viscosity formulation with UV stabilizers and other additives which helps prevent premature yellowing and degradation. It will cure at room temperature or may be accelerated with mild heat and contains a proprietary air release additive which allows for an air bubble free high gloss dome coating. 收起 | |
| Deco-Coat DC-2550 | Epoxies, Etc. | Deco-Coat DC-2550 is a low viscosity, two part, flexible epoxy doming resin that cures at room temperature to form a “bubble free”, flexible coating, impervious to moisture and chemicals. Exhibiting excellent adhesion to a variety of substrates, this prod...展开 Deco-Coat DC-2550 is a low viscosity, two part, flexible epoxy doming resin that cures at room temperature to form a “bubble free”, flexible coating, impervious to moisture and chemicals. Exhibiting excellent adhesion to a variety of substrates, this product is ideal for use in applications such as labels, plaques, emblems, badges, key & luggage tags, and wood trim kits. 收起 | |
| EPM-2420 | NuSil Silicone Technology 1 | EPM-2420 is a general purpose silicone adhesive that has a low volatility and a 1:1 Mix Ratio (Part A: Part B). The primary function of this adhesive is to protect electric components and assemblies against vibration, shock, dust, moisture, chemicals and ...展开 EPM-2420 is a general purpose silicone adhesive that has a low volatility and a 1:1 Mix Ratio (Part A: Part B). The primary function of this adhesive is to protect electric components and assemblies against vibration, shock, dust, moisture, chemicals and other hazards. It is also ideal for applications where a low viscosity and clarity are important. 收起 | |
| EPM-2890 | NuSil Silicone Technology 1 | EPM-2890 is a one part, white, silicone adhesive that is thermally conductive and non corrosive. It has the ability to operate on a wide temperature range and provide moderate heat transfer between electrical components and their heat sinks. This product ...展开 EPM-2890 is a one part, white, silicone adhesive that is thermally conductive and non corrosive. It has the ability to operate on a wide temperature range and provide moderate heat transfer between electrical components and their heat sinks. This product can also function as a caulking, sealing, potting or adhesive material in electronics applications that require minimal outgassing to prevent condensation from building in sensitive devices. 收起 | |
| Epoxies® 20-3004 HV | Epoxies, Etc. | Epoxies® 20-3004 HV is a high viscosity, two part, chemical resistant epoxy system that has been developed for potting, coating and adhesive applications requiring superior chemical resistance. It exhibits outstanding bonds to a variety of substrates incl...展开 Epoxies® 20-3004 HV is a high viscosity, two part, chemical resistant epoxy system that has been developed for potting, coating and adhesive applications requiring superior chemical resistance. It exhibits outstanding bonds to a variety of substrates including most metals and plastics. 20-3004's high viscosity prevents sagging and is noncorrosive. 收起 | |
| Epoxies® 20-3004 LV | Epoxies, Etc. | Epoxies® 20-3004 LV is a low viscosity, two part, chemical resistant epoxy system that has been developed for potting, coating and adhesive applications requiring superior chemical resistance. It exhibits outstanding bonds to a variety of substrates inclu...展开 Epoxies® 20-3004 LV is a low viscosity, two part, chemical resistant epoxy system that has been developed for potting, coating and adhesive applications requiring superior chemical resistance. It exhibits outstanding bonds to a variety of substrates including most metals and plastics. 20-3004's low viscosity lends itself to being a self leveling system and is noncorrosive. 收起 | |
| Epoxies® 20-3064 NC | Epoxies, Etc. | Epoxies® 20-3064 NC is a filled, flexible epoxy potting compound and adhesive, developed to give the end user the ability to control the hardness of the cured casting. By varying the mix ratio the hardness can be varied from 60 Shore A to 85 Shore D. 20-3...展开 Epoxies® 20-3064 NC is a filled, flexible epoxy potting compound and adhesive, developed to give the end user the ability to control the hardness of the cured casting. By varying the mix ratio the hardness can be varied from 60 Shore A to 85 Shore D. 20-3064 NC provides excellent thermal shock resistance and outstanding adhesion. 收起 | |
| Epoxies® 20-3064 NC LV | Epoxies, Etc. | Epoxies® 20-3064 NC LV is a low viscosity, flexible epoxy potting compound and adhesive, developed to give the end user the ability to control the hardness of the cured casting. By varying the mix ratio the hardness can be varied from 60 Shore A to 85 Sho...展开 Epoxies® 20-3064 NC LV is a low viscosity, flexible epoxy potting compound and adhesive, developed to give the end user the ability to control the hardness of the cured casting. By varying the mix ratio the hardness can be varied from 60 Shore A to 85 Shore D. 20-3064 NC provides excellent thermal shock resistance and outstanding adhesion. 收起 | |
| Epoxies® 20-3068 | Epoxies, Etc. | Epoxies® 20-3068 is a two part epoxy adhesive and potting compound that can cure in room temperatures and has excellent chemical and corrosion resistance. This product provides good water resistance, adhesion, and toughness and is well suited for use with...展开 Epoxies® 20-3068 is a two part epoxy adhesive and potting compound that can cure in room temperatures and has excellent chemical and corrosion resistance. This product provides good water resistance, adhesion, and toughness and is well suited for use with most electronics. 20-3068 Epoxy System meets the Food and Drug Administration (FDA) regulations permitting use in “indirect” food contact applications. The raw materials used in the products comply with the FDA regulations of Title 21 Code of Federal Regulations under Sections 175.105 and 175.300. 收起 | |
| Epoxies® 20-3236 | Epoxies, Etc. | Epoxies® 20-3236 is a low viscosity, copolymer elastomer made of a modified epoxy resin that is specifically designed for bonding vinyls and neoprenes. It can be used in many difficult bonding applications and has an extended working time with a convenien...展开 Epoxies® 20-3236 is a low viscosity, copolymer elastomer made of a modified epoxy resin that is specifically designed for bonding vinyls and neoprenes. It can be used in many difficult bonding applications and has an extended working time with a convenient 2:1 mix ratio. 20-3236 Resin can also be used for the encapsulation of vinyl insulated electrical components or sealing vinyl lead wires. 收起 | |
| Epoxies® 20-3302 | Epoxies, Etc. | Epoxies® 20-3302 is a two part, water clear, optically transparent epoxy potting compound and adhesive. This high purity grade polymer system is formulated with proprietary ultraviolet protectors to minimize yellowing of the cured epoxy. It provides excel...展开 Epoxies® 20-3302 is a two part, water clear, optically transparent epoxy potting compound and adhesive. This high purity grade polymer system is formulated with proprietary ultraviolet protectors to minimize yellowing of the cured epoxy. It provides excellent optical transmission along with outstanding adhesion and electrical properties. 20-3302 is a low viscosity system designed for L.E.D. encapsulating, fiber optics, and any potting or adhesive application requiring a bubble free and glass smooth finish with optimum clarity. 收起 | |
| Epoxies® 20-3302NCLV | Epoxies, Etc. | Epoxies® 20-3302NCLV is a two part, water clear, optically transparent epoxy potting compound and adhesive. This high purity grade polymer system is formulated with proprietary ultraviolet protectors to minimize yellowing of the cured epoxy. It provides e...展开 Epoxies® 20-3302NCLV is a two part, water clear, optically transparent epoxy potting compound and adhesive. This high purity grade polymer system is formulated with proprietary ultraviolet protectors to minimize yellowing of the cured epoxy. It provides excellent optical transmission along with outstanding adhesion and electrical properties. 20-3302NCLV is a very low viscosity system designed for L.E.D. encapsulating, fiber optics, and any potting or adhesive application requiring a bubble free and glass smooth finish with optimum clarity. 收起 | |
| Epoxies® 40-3900 | Epoxies, Etc. | Epoxies® 40-3900 is a two part, silver filled, epoxy resin adhesive that is electrically conductive and has a very low resistance value of less than 1x10-4 ohm-cm. 40-3900 is specifically designed for adhesive bonding in microelectronic and optoelectronic...展开 Epoxies® 40-3900 is a two part, silver filled, epoxy resin adhesive that is electrically conductive and has a very low resistance value of less than 1x10-4 ohm-cm. 40-3900 is specifically designed for adhesive bonding in microelectronic and optoelectronic applications. Due to its excellent continuity, it has also been used extensively in applications such as micro-wave EMI and RFI shielding, in the assembly or repair of printed circuit boards, wave guides, electronic modules, flat cable, high frequency shields, connectors, circuitry, and as a cold solder. 收起 | |
| Epoxies® 40-3905 | Epoxies, Etc. | Epoxies® 40-3905 is an electrically epoxy adhesive and coating system designed for applications requiring low temperature cures. It will cure at room temperature in 18-24 hours and can be accelerated with mild heat. Epoxies® 40-3905 is a solvent free epo...展开 Epoxies® 40-3905 is an electrically epoxy adhesive and coating system designed for applications requiring low temperature cures. It will cure at room temperature in 18-24 hours and can be accelerated with mild heat. Epoxies® 40-3905 is a solvent free epoxy filled with pure silver for improved electrical conduction and heat transfer. It has outstanding adhesion to plastics, aluminum, copper, magnesium, steel, bronze, nickel, kovar, ceramic, glass, phenolic, and printed circuit boards. 40-3905 can also be thinned with up to 10% Toluol for many coating applications. 收起 | |
| Epoxies® 40-3909 | Epoxies, Etc. | Epoxies® 40-3909 is a two part epoxy resin adhesive and coating compound, filled with a highly conductive, silver coated nickel. It is designed to provide low volume resistivity of less than 5x10-3 ohm-cm. Silver coated nickel offers a lower cost alternat...展开 Epoxies® 40-3909 is a two part epoxy resin adhesive and coating compound, filled with a highly conductive, silver coated nickel. It is designed to provide low volume resistivity of less than 5x10-3 ohm-cm. Silver coated nickel offers a lower cost alternative to many silver filled epoxy systems. 40-3909 has a convenient 1:1 mix ratio by weight and can cure at room temperature overnight but can also be accelerated with mild heat. It is well suited for use in the assembly or repairs of printed circuit boards, connectors, wave guides, high frequency shields, and as a cold solder. 收起 | |
| Epoxies® 40-3911 | Epoxies, Etc. | Epoxies® 40-3911 is an electrically conductive, silver filled, epoxy adhesive that is formulated without solvents and is 100% solids. Because of it is highly filled with silver, it has a very low volume resistance rating of 5 X 10-4 ohm-cm. This one part ...展开 Epoxies® 40-3911 is an electrically conductive, silver filled, epoxy adhesive that is formulated without solvents and is 100% solids. Because of it is highly filled with silver, it has a very low volume resistance rating of 5 X 10-4 ohm-cm. This one part system cures quickly at elevated temperatures making it a suitable adhesive for many electronic assembly operations. And it is a good choice for lid sealing and die bonding applications. 收起 | |
| Epoxies® 50-3112 | Epoxies, Etc. | Epoxies® 50-3112 is a two part, fast curing thermally conductive epoxy adhesive. Dark grey in color when mixed, this product a simple 1:1 mix ratio and develops a 1,400 psi Lap Shear strength bond (aluminum to aluminum) in four hours at room temperature ...展开 Epoxies® 50-3112 is a two part, fast curing thermally conductive epoxy adhesive. Dark grey in color when mixed, this product a simple 1:1 mix ratio and develops a 1,400 psi Lap Shear strength bond (aluminum to aluminum) in four hours at room temperature and 2,200 psi. just after 20 hours. 50-3112 offers fast heat dissipation for a wide range of electronic applications. The black resin and white hardener provide an excellent visual indication of a complete mix. 收起 | |
| Epoxies® 50-3122 | Epoxies, Etc. | Epoxies® 50-3122 is a one part epoxy adhesive with both high sheer and high peel strength properties. It is also able to maintain exceptionally strong bonds over a wide temperature range of -60 to +205°C. 50-3122 is both a thermally conductive and electri...展开 Epoxies® 50-3122 is a one part epoxy adhesive with both high sheer and high peel strength properties. It is also able to maintain exceptionally strong bonds over a wide temperature range of -60 to +205°C. 50-3122 is both a thermally conductive and electrically insulating epoxy adhesive. It is suitable for electronic, electrical, aerospace, appliance, automotive and industrial applications. 收起 | |
| Epoxies® 50-3186 NC | Epoxies, Etc. | Epoxies® 50-3186 NC is a two part thermally conductive epoxy adhesive. This thixotropic adhesive provides high temperature bonds to a variety of substrates. 50-3186 NC is a perfect choice for applications requiring high thermal conductivity, low thermal e...展开 Epoxies® 50-3186 NC is a two part thermally conductive epoxy adhesive. This thixotropic adhesive provides high temperature bonds to a variety of substrates. 50-3186 NC is a perfect choice for applications requiring high thermal conductivity, low thermal expansion, and high operating temperature performance. 收起 | |
| Epoxies® 70-3812 NC | Epoxies, Etc. | Epoxies® 70-3812 NC is a two part, aluminum filled, high thermal transfer epoxy. Primarily used for the production of heat resistant tools, parts, or bonds that require the highest thermal conductivity and heat resistance. Epoxies® 70-3812 NC is formulate...展开 Epoxies® 70-3812 NC is a two part, aluminum filled, high thermal transfer epoxy. Primarily used for the production of heat resistant tools, parts, or bonds that require the highest thermal conductivity and heat resistance. Epoxies® 70-3812 NC is formulated with a unique combination of fillers, particle sizes and dispersion techniques. It is well suited for use with a variety of heat sink applications and its viscosity is particularly good for Fin bonding. 收起 | |
| FS-3730-2 | NuSil Silicone Technology 1 | FS-3730-2 is a black adhesive/sealant that is based on a fluorosilicone polymer with 100 mole % fluorosilicone. It can be utilized to bond or protect hardware components that are exposed to aviation fuels or gasoline. This product can also be used for sea...展开 FS-3730-2 is a black adhesive/sealant that is based on a fluorosilicone polymer with 100 mole % fluorosilicone. It can be utilized to bond or protect hardware components that are exposed to aviation fuels or gasoline. This product can also be used for sealing or bonding applications requiring fuel and/or solvent resistance. Another strong property is that it bonds aggressively to most surfaces. 收起 | |
| FS1-3730 | NuSil Silicone Technology 1 | FS1-3730 is an adhesive/sealant that is translucent and based on a 100 mole % fluorosilicone polymer. This product can be utilized for sealing and bonding applications that require solvent and/or fuel resistance. It is a very strong product and will bond ...展开 FS1-3730 is an adhesive/sealant that is translucent and based on a 100 mole % fluorosilicone polymer. This product can be utilized for sealing and bonding applications that require solvent and/or fuel resistance. It is a very strong product and will bond aggressively to most surfaces. 收起 | |
| FS3-3730 | NuSil Silicone Technology 1 | FS3-3730 is a translucent, one-part, adhesive/sealant that has 100 mole % flouorosilicone. It is strong and will bond aggressively to most surfaces. This product can be utilized for bonding and sealing applications that require solven and/or fuel resistan...展开 FS3-3730 is a translucent, one-part, adhesive/sealant that has 100 mole % flouorosilicone. It is strong and will bond aggressively to most surfaces. This product can be utilized for bonding and sealing applications that require solven and/or fuel resistance. It can also be used for protecting or bonding hardware components that have been exposed to gasoline or aviation fuels. 收起 | |
| PSA-1170 | NuSil Silicone Technology 1 | PSA-1170 is a one-part, non-curing, pressure sensitive silicone adhesive that has a translucent appearance and a low viscosity. It can be used for temporarily adhering to various substrates such as silicone, glass, metals, and organic rubbers. PSA-1170 is...展开 PSA-1170 is a one-part, non-curing, pressure sensitive silicone adhesive that has a translucent appearance and a low viscosity. It can be used for temporarily adhering to various substrates such as silicone, glass, metals, and organic rubbers. PSA-1170 is supplied in flammable solvents so it needs to be handled cautiously. Allow solvent to evaporate before adhering or attaching adhesive-coated objects together. 收起 | |
| R-1008-0 | NuSil Silicone Technology 1 | R-1008-0 is a translucent, one part, flowable silicone elastomer dispersion that cures in 7 days at room temperature when exposed to atmospheric moisture. It can be used as a marking ink for silicone rubber parts and other components where the coating mus...展开 R-1008-0 is a translucent, one part, flowable silicone elastomer dispersion that cures in 7 days at room temperature when exposed to atmospheric moisture. It can be used as a marking ink for silicone rubber parts and other components where the coating must maintain long term stability. It is best used for applications that require an operating temperature of 65°C to 260°C (-85°F to 465°F). 收起 | |
| R-1008-1 | NuSil Silicone Technology 1 | R-1008-1 is a white, RTV silicone coating and marking ink that is a one part, flowable silicone elastomer dispersion and cures in 7 days at room temperature when exposed to atmospheric moisture. It is best used for applications that require an operating t...展开 R-1008-1 is a white, RTV silicone coating and marking ink that is a one part, flowable silicone elastomer dispersion and cures in 7 days at room temperature when exposed to atmospheric moisture. It is best used for applications that require an operating temperature of 65°C to 260°C (-85°F to 465°F).This product can be used as a marking ink for silicone rubber parts and other components where the coating must maintain long term stability. 收起 | |
| R-1008-2 | NuSil Silicone Technology 1 | R-1008-2 is a black RTV silicone coating and marking ink that is a one part, flowable silicone elastomer dispersion, and cures in 7 days at room temperature when exposed to atmospheric moisture. It is best used for applications that require an operating t...展开 R-1008-2 is a black RTV silicone coating and marking ink that is a one part, flowable silicone elastomer dispersion, and cures in 7 days at room temperature when exposed to atmospheric moisture. It is best used for applications that require an operating temperature of 65°C to 260°C (-85°F to 465°F).This product can be used on silicone rubber parts as a marking ink where the coating must maintain long term stability. 收起 | |
| R-1008-8 | NuSil Silicone Technology 1 | R-1008-8 is a violet, one part, flowable silicone elastomer dispersion that cures in 7 days at room temperature when exposed to atmospheric moisture. It can be used as a marking ink for silicone rubber parts and other components where the coating must mai...展开 R-1008-8 is a violet, one part, flowable silicone elastomer dispersion that cures in 7 days at room temperature when exposed to atmospheric moisture. It can be used as a marking ink for silicone rubber parts and other components where the coating must maintain long term stability. It is best used for applications that require an operating temperature of 65°C to 260°C (-85°F to 465°F). 收起 | |
| R-1130 | NuSil Silicone Technology 1 | R-1130 is a non-corrosive, rapid curing, nun-slumping RTV silicone adhesive that can be used as a coating for semi-conductors and integrated circuits. It can also be utilized as an adhesive/sealant for electrical wires, terminals, mounting resistors and ...展开 R-1130 is a non-corrosive, rapid curing, nun-slumping RTV silicone adhesive that can be used as a coating for semi-conductors and integrated circuits. It can also be utilized as an adhesive/sealant for electrical wires, terminals, mounting resistors and connectors. It is ideal for overhead or side wall applications due to its non-slumping characteristics. 收起 | |
| R-1140 | NuSil Silicone Technology 1 | R-1140 is a one part, translucent, non-slumping silicone adhesive that is supplied in ready to use Semco® cartridges. This product bonds aggressively to most surfaces including glass, ceramics, metals, natural and synthetic fibers, wood, painted surfaces ...展开 R-1140 is a one part, translucent, non-slumping silicone adhesive that is supplied in ready to use Semco® cartridges. This product bonds aggressively to most surfaces including glass, ceramics, metals, natural and synthetic fibers, wood, painted surfaces and other silicone rubbers. It is best used for applications that require an operating temperature rang of 65 to 240°C (-85 to 465°F). 收起 | |
| R-2100-1 | NuSil Silicone Technology 1 | R-2100-1 is a white silicone ink that has a strong adhesion to other silicones and is dipersed in Xylene. It is designed to be used in application that require a rapid cure schedule and it provides a high capacity for single print applications. It is idea...展开 R-2100-1 is a white silicone ink that has a strong adhesion to other silicones and is dipersed in Xylene. It is designed to be used in application that require a rapid cure schedule and it provides a high capacity for single print applications. It is ideal as a marking ink on silicone parts as well as other components where the coating must demonstrate a long-term stability. 收起 | |
| R-2100-2 | NuSil Silicone Technology 1 | R-2100-2 is a black silicone ink that has a strong adhesion to other silicones and is dipersed in Xylene. It is designed to be used in application that require a rapid cure schedule and it provides a high capacity for single print applications. It is idea...展开 R-2100-2 is a black silicone ink that has a strong adhesion to other silicones and is dipersed in Xylene. It is designed to be used in application that require a rapid cure schedule and it provides a high capacity for single print applications. It is ideal as a marking ink on silicone parts as well as other components where the coating must demonstrate a long-term stability. 收起 | |
| R-2100-3 | NuSil Silicone Technology 1 | R-2100-3 is a red silicone ink that has a strong adhesion to other silicones and is dipersed in Xylene. It is designed to be used in application that require a rapid cure schedule and it provides a high capacity for single print applications. It is ideal ...展开 R-2100-3 is a red silicone ink that has a strong adhesion to other silicones and is dipersed in Xylene. It is designed to be used in application that require a rapid cure schedule and it provides a high capacity for single print applications. It is ideal as a marking ink on silicone parts as well as other components where the coating must demonstrate a long-term stability. 收起 | |
| R-2100-6 | NuSil Silicone Technology 1 | R-2100-6 is a green silicone ink that has a strong adhesion to other silicones and is dipersed in Xylene. It is designed to be used in application that require a rapid cure schedule and it provides a high capacity for single print applications. It is idea...展开 R-2100-6 is a green silicone ink that has a strong adhesion to other silicones and is dipersed in Xylene. It is designed to be used in application that require a rapid cure schedule and it provides a high capacity for single print applications. It is ideal as a marking ink on silicone parts as well as other components where the coating must demonstrate a long-term stability. 收起 | |
| R-2145 | NuSil Silicone Technology 1 | R1-2145 is an extremely tough gray silicone adhesive that does not require atmospheric moisture to cure and the product is available in easy to use, airless side by side kits that eliminate mixing and deairing. It rapidly cures at room temperature by appl...展开 R1-2145 is an extremely tough gray silicone adhesive that does not require atmospheric moisture to cure and the product is available in easy to use, airless side by side kits that eliminate mixing and deairing. It rapidly cures at room temperature by applying heat in an oven or a heat gun or lamp. This adhesive can be used for bonding and sealing silicones to each other and other substrates such as metals and plastics. It is ready for rapid production or prototyping due to the a rapid cure. 收起 | |
| R-2634 | NuSil Silicone Technology 1 | R-2634 is a two-part, electrically conductive RTV silicone that is designed for enhanced performance in extreme high and low temperatures. It can be used as an adhesive to bond covers on housings or where grooves and other configurations require a non-flo...展开 R-2634 is a two-part, electrically conductive RTV silicone that is designed for enhanced performance in extreme high and low temperatures. It can be used as an adhesive to bond covers on housings or where grooves and other configurations require a non-flowable material. This product is especially useful for sealing formed-in-place conductive gaskets and grounding connections. It can also be used for EMI and RFI shielding for aerospace and electrical applications. 收起 | |
| R-2949 | NuSil Silicone Technology 1 | R-2949 is a two-part, white, thermally conductive silicone that can cure rapidly with the addition of heat. It is an ideal product to be used in applications that require protection against extreme low and high temperatures. It can be used as an adhesive ...展开 R-2949 is a two-part, white, thermally conductive silicone that can cure rapidly with the addition of heat. It is an ideal product to be used in applications that require protection against extreme low and high temperatures. It can be used as an adhesive to bond openings in housings and modules where grooves or other configurations require a limited flow material with moderate thermal conductivity. It can also provide the transfer of heat between electrical components and their heat sinks. 收起 | |
| R-3930 | NuSil Silicone Technology 1 | R-3930 is a one-part RTV silicone elastomer dispersed in tert butyl acetate and the slight addition of heat will accelerate the curing process. It is designed for spraying, dip casting, and RTV curing of thin elastomeric films. It can also be utilized for...展开 R-3930 is a one-part RTV silicone elastomer dispersed in tert butyl acetate and the slight addition of heat will accelerate the curing process. It is designed for spraying, dip casting, and RTV curing of thin elastomeric films. It can also be utilized for bonding, coating, and sealing applications that require solvent and/or fuel resistance. It bonds aggressively to most surfaces and can help minimize ice adhesion. 收起 | |
| R-3975 | NuSil Silicone Technology 1 | R-3975 is a one-part RTV silicone elastomer dispersed in tert butyl acetate and the slight addition of heat will accelerate the curing process. It can be utilized for bonding, coating, and sealing applications that require solvent and/or fuel resistance. ...展开 R-3975 is a one-part RTV silicone elastomer dispersed in tert butyl acetate and the slight addition of heat will accelerate the curing process. It can be utilized for bonding, coating, and sealing applications that require solvent and/or fuel resistance. It bonds aggressively to most surfaces and can help minimize ice adhesion. It is designed for spraying, dip casting, and RTV curing of thin elastomeric films. 收起 | |
| R1-2145 | NuSil Silicone Technology 1 | R1-2145 is an extremely tough gray silicone adhesive that rapidly cures at room temperature by applying heat in an oven or a heat gun or lamp. It does not require atmospheric moisture to cure and the product is available in easy to use, airless side by si...展开 R1-2145 is an extremely tough gray silicone adhesive that rapidly cures at room temperature by applying heat in an oven or a heat gun or lamp. It does not require atmospheric moisture to cure and the product is available in easy to use, airless side by side kits that eliminate mixing and deairing, This adhesive can be used for bonding and sealing silicones to each other and other substrates such as metals and plastics. It is ready for rapid production or prototyping due to the a rapid cure. 收起 | |
| R1-3930-11 | NuSil Silicone Technology 1 | R1-3930-11 is a gray fluorosilicone, adhesive, sealant, and coating that bonds aggressively to most surfaces. This product can be utilized for sealing, coating, and bonding applications that require solvent and/or fuel resistance. It can also be used for ...展开 R1-3930-11 is a gray fluorosilicone, adhesive, sealant, and coating that bonds aggressively to most surfaces. This product can be utilized for sealing, coating, and bonding applications that require solvent and/or fuel resistance. It can also be used for bonding or protecting hardware components exposed to gasoline or aviation fuels. It can be further dispersed for spraying applications. 收起 | |
| R3-2160 | NuSil Silicone Technology 1 | R3-2160 is a two-part, pourable silicone system that has a high tear strength and good physical properties. It is designed for enhance performance in extreme high and low temperatures. The ideal use for this high temperature adhesive/sealant is for pottin...展开 R3-2160 is a two-part, pourable silicone system that has a high tear strength and good physical properties. It is designed for enhance performance in extreme high and low temperatures. The ideal use for this high temperature adhesive/sealant is for potting connectors, seals and gaskets, molded high voltage terminals, and cable harness breakouts. 收起 | |
| R3-3930-11 | NuSil Silicone Technology 1 | R3-3930-11 is a gray, two-part, RTV silicone that can be further dispersed for spraying applications. It has strong physical attributes which make it bond aggressively to most surfaces. It can also be utilized in applications where coating, sealing, and ...展开 R3-3930-11 is a gray, two-part, RTV silicone that can be further dispersed for spraying applications. It has strong physical attributes which make it bond aggressively to most surfaces. It can also be utilized in applications where coating, sealing, and bonding are necessary for fuel and /or solvent resistance.This product can be used to bond or protect hardware components that are exposed to gasoline or aviation fuels. 收起 | |
| R31-2186 | NuSil Silicone Technology 1 | R31-2186 is a translucent, thixotropic, silicone adhesive that has a high tear strength and cures at room temperature, and rapidly with the addition of heat. The consistency of this product allows it to be supplied in easy-to-use, airless side-by-side kit...展开 R31-2186 is a translucent, thixotropic, silicone adhesive that has a high tear strength and cures at room temperature, and rapidly with the addition of heat. The consistency of this product allows it to be supplied in easy-to-use, airless side-by-side kits that remove the need to mix. It can be used as an adhesive for sealing and bonding silicones to each other and other substrates such as plastics and metals. 收起 | |
| R32-2186 | NuSil Silicone Technology 1 | R32-2186 is a two-part, translucent, thixotropic, high tear strength silicone adhesive that cures rapidly with the application of heat in an oven, or by a heat gun or lamp. It does not require atmospheric moisture to cure. This adhesive can be used for bo...展开 R32-2186 is a two-part, translucent, thixotropic, high tear strength silicone adhesive that cures rapidly with the application of heat in an oven, or by a heat gun or lamp. It does not require atmospheric moisture to cure. This adhesive can be used for bonding and sealing silicones to each other and other substrates such as metals and plastics. This product is ready for rapid production or prototyping due to its rapid cure rate. 收起 | |
| R33-2186 | NuSil Silicone Technology 1 | R33-2183 is a fast-curing silicone adhesive that cures at room temperature, or rapidly with the use of heat in an oven, or a heat gun lamp. It does not require atmospheric moisture to cure. This product can be used as an adhesive for sealing and bonding s...展开 R33-2183 is a fast-curing silicone adhesive that cures at room temperature, or rapidly with the use of heat in an oven, or a heat gun lamp. It does not require atmospheric moisture to cure. This product can be used as an adhesive for sealing and bonding silicones to each other and other substrates such as metals and plastics. It is best used for applications requiring an operating temperature range of –65°C to 240°C (-85 to 465°F). 收起 | |
| R4-1140 | NuSil Silicone Technology 1 | R4-1140 is a one-part, self leveling, solvent-free silicone adhesive that cures at room temperature upon exposure to atmospheric moisture. This product bonds aggressively to many surfaces including ceramics, metals, glass, synthetic and natural fibers, wo...展开 R4-1140 is a one-part, self leveling, solvent-free silicone adhesive that cures at room temperature upon exposure to atmospheric moisture. This product bonds aggressively to many surfaces including ceramics, metals, glass, synthetic and natural fibers, wood, painted surfaces, many plastics and other silicone rubbers. 收起 | |
| SCV-2590 | NuSil Silicone Technology 1 | SCV-2590 is a two-part, clear silicone elastomer that can be used as an adhesive in low strength applications such as solar cell arrays where clarity, and a low volatility are needed. In electronic and space applications it can prevent condensation from b...展开 SCV-2590 is a two-part, clear silicone elastomer that can be used as an adhesive in low strength applications such as solar cell arrays where clarity, and a low volatility are needed. In electronic and space applications it can prevent condensation from building in sensitive devices. This product also features Ultra Low OutgassingTM which exceeds specifications outlined in NASA and the European Space Agency. 收起 | |
| SCV-2590-2 | NuSil Silicone Technology 1 | SCV-2590-2 is a black silicone that has low viscosity and can be utilized as an adhesive in optical applications requiring a black material to block light. This product offers a broad operating temperature range and can be used to protect electronic assem...展开 SCV-2590-2 is a black silicone that has low viscosity and can be utilized as an adhesive in optical applications requiring a black material to block light. This product offers a broad operating temperature range and can be used to protect electronic assemblies from extreme temperatures, humidity and radiation. It also features Ultra Low OutgassingTM which makes it ideal to protect sensitive devices from condensation. 收起 | |
| SCV1-2590 | NuSil Silicone Technology 1 | SCV1-2590 is an optically clear silicone system with low viscosity and is a suitable adhesive in applications such as solar cell arrays, where clarity and low volatility are important. It can also be used in space and electric applications that require lo...展开 SCV1-2590 is an optically clear silicone system with low viscosity and is a suitable adhesive in applications such as solar cell arrays, where clarity and low volatility are important. It can also be used in space and electric applications that require low outgassing to avoid condensation in sensitive devices. 收起 | |
| SCV1-2596 | NuSil Silicone Technology 1 | SCV1-2596 is an electrically conductive silicone adhesive/sealant that features Ultra Low OutgassingTM. It can be utilized in applications that require minimal volatile condensables under extreme operating conditions. This product can also be used for RFI...展开 SCV1-2596 is an electrically conductive silicone adhesive/sealant that features Ultra Low OutgassingTM. It can be utilized in applications that require minimal volatile condensables under extreme operating conditions. This product can also be used for RFI and EMI shielding in electrical and space applications and is well suited to for form-in-place conductive gaskets. 收起 | |
| SP-120 | NuSil Silicone Technology 1 | SP-120 is a silicone primer that is formulated for use with one and two-part RTV systems, and does not need mixing.The translucent color of SP-120 helps to preserve visibility with other translucent products. This primer will also improve the adhesion of ...展开 SP-120 is a silicone primer that is formulated for use with one and two-part RTV systems, and does not need mixing.The translucent color of SP-120 helps to preserve visibility with other translucent products. This primer will also improve the adhesion of the RTV systems to other substrates such as metals, ceramics, glass, and wood. 收起 | |
| SP-121 | NuSil Silicone Technology 1 | SP-121 is a specially formulated silicone primer that is designed to be used with one and two-part RTV systems. This primer is red in color and provides an easy visual determination of surface coverage when using it. It will also improve the adhesion of t...展开 SP-121 is a specially formulated silicone primer that is designed to be used with one and two-part RTV systems. This primer is red in color and provides an easy visual determination of surface coverage when using it. It will also improve the adhesion of the RTV systems to various substrates such as glass, metals, rigid plastics, and ceramics. 收起 | |
| SP-124 | NuSil Silicone Technology 1 | SP-124 is a silicone primer that is designed for use with condensation cured systems where conventional silicone primers are ineffective. This product will help to improve the adhesion of one and two-part condensation cured systems to various substrates s...展开 SP-124 is a silicone primer that is designed for use with condensation cured systems where conventional silicone primers are ineffective. This product will help to improve the adhesion of one and two-part condensation cured systems to various substrates such as glass, ceramics, metal, rigid plastics, wood and some composites. It can be applied by wiping, brushing or dipping a uniform thin film onto the substrates. 收起 | |
| SP-142 | NuSil Silicone Technology 1 | SP-142 is a translucent silicone primer that is specially designed to be used with platinum-cured systems on polycarbonates. This one-component primer is supplied in VM&P Naphtha and requires no mixing. When brushed, wiped, or dipped on a polycarbonate, i...展开 SP-142 is a translucent silicone primer that is specially designed to be used with platinum-cured systems on polycarbonates. This one-component primer is supplied in VM&P Naphtha and requires no mixing. When brushed, wiped, or dipped on a polycarbonate, it will help improve the adhesion with addition-cured systems. 收起 | |
| SP-270 | NuSil Silicone Technology 1 | SP-270 is a silicone primer that was specifically designed for use with platinum-cured systems where other conventional primers are insufficient. It is a one-component primer supplied in VM&P Naphtha so it requires no mixing at all. When applied to additi...展开 SP-270 is a silicone primer that was specifically designed for use with platinum-cured systems where other conventional primers are insufficient. It is a one-component primer supplied in VM&P Naphtha so it requires no mixing at all. When applied to addition-cured systems with iridite coated materials, it will improve the adhesion. This also holds true with other substrates including glass, metals, some plastics and other silicone materials. 收起 | |
| SP1-204 | NuSil Silicone Technology 1 | SP1-204 is a specially formulated translucent primer that is designed for use with one and two-part RTV systemts. This primer requires no mixing and air dries. It is an ideal product to help improve the adhesion of one and two-part systems to various subs...展开 SP1-204 is a specially formulated translucent primer that is designed for use with one and two-part RTV systemts. This primer requires no mixing and air dries. It is an ideal product to help improve the adhesion of one and two-part systems to various substrates such as glass, metals, plastics, ceramics and wood. 收起 | |
| UV Cure 60-7105 | Epoxies, Etc. | UV Cure 60-7105 is a low viscosity urethane adhesive, coating, and potting compound. This UV curable resin exhibits good adhesion, toughness, and exterior durability. UV Cure 60-7105 does not contain any solvents and is therefore a 100% solids system. Thi...展开 UV Cure 60-7105 is a low viscosity urethane adhesive, coating, and potting compound. This UV curable resin exhibits good adhesion, toughness, and exterior durability. UV Cure 60-7105 does not contain any solvents and is therefore a 100% solids system. This material is a good choice for products requiring deep section curing. 收起 | |
| UV Cure 60-7108 | Epoxies, Etc. | UV Cure 60-7108 is a low viscosity and optically clear UV curable epoxy system designed for fiber optic and other clear adhesive and potting applications. With good electrical insulation properties and moisture resistance, this product is ideal for use in...展开 UV Cure 60-7108 is a low viscosity and optically clear UV curable epoxy system designed for fiber optic and other clear adhesive and potting applications. With good electrical insulation properties and moisture resistance, this product is ideal for use in the manufacture of electronic assemblies. Low viscosity makes it suitable for a variety of other coating applications. 收起 | |
| UV Cure 60-7111 | Epoxies, Etc. | UV Cure 60-7111 is a non-yellowing, UV curable urethane adhesive and encapsulant featuring high impact strength and flexibility, as well as good water and weather resistance. This product is formulated to provide low stress on electronics and displays goo...展开 UV Cure 60-7111 is a non-yellowing, UV curable urethane adhesive and encapsulant featuring high impact strength and flexibility, as well as good water and weather resistance. This product is formulated to provide low stress on electronics and displays good adhesion to a variety of substances. 收起 | |
| UV Cure 60-7114 | Epoxies, Etc. | UV Cure 60-7114 is a low viscosity urethane adhesive, potting compound, and coating with very good adhesion to metal and plastic substrates. This UV curable resin is formulated to provide excellent water and chemical resistance, making it a good choice fo...展开 UV Cure 60-7114 is a low viscosity urethane adhesive, potting compound, and coating with very good adhesion to metal and plastic substrates. This UV curable resin is formulated to provide excellent water and chemical resistance, making it a good choice for potting electronic assemblies exposed to excessive moisture. 收起 | |
| UV Cure 60-7155 | Epoxies, Etc. | UV Cure 60-7155 is a one part epoxy adhesive and potting compound that cures with low intensity black light or high intensity UV lamps. Displaying good moisture and chemical resistance, along with a deep section cure, this product is ideal for potting and...展开 UV Cure 60-7155 is a one part epoxy adhesive and potting compound that cures with low intensity black light or high intensity UV lamps. Displaying good moisture and chemical resistance, along with a deep section cure, this product is ideal for potting and encapsulating applications. 收起 | |
| UV Cure 60-7156 | Epoxies, Etc. | UV Cure 60-7156 is a one part flexible epoxy adhesive and potting compound that can cure in low intensity black light or high intensity UV lamps. Its low durometer (flexibility) provides less stress on sensitive electronic components. This product is wate...展开 UV Cure 60-7156 is a one part flexible epoxy adhesive and potting compound that can cure in low intensity black light or high intensity UV lamps. Its low durometer (flexibility) provides less stress on sensitive electronic components. This product is water clear, moisture and chemical resistant, and designed to be used as an adhesive, coating, or encapsulant. 收起 | |
| UV Cure 60-7170 | Epoxies, Etc. | UV Cure 60-7170 is a one- component epoxy that cures with low intensity black light or high intensity UV lamps. This system is water clear, moisture and chemical resistant, and designed to be used as an adhesive, coating, or encapsulant. UV Cure 60-7170 i...展开 UV Cure 60-7170 is a one- component epoxy that cures with low intensity black light or high intensity UV lamps. This system is water clear, moisture and chemical resistant, and designed to be used as an adhesive, coating, or encapsulant. UV Cure 60-7170 is a good choice for potting and encapsulating applications due to its ability to deep section cure up to ¾ inch. Another unique and important feature is its ability to “dark cure.” Once exposed to UV light the UV Cure 60-7170 will continue to cure in the absence of light. 收起 | |
| UV Cure 60-7180 | Epoxies, Etc. | UV Cure 60-7180 is a one part, UV curable adhesive that is water clear and exhibits great yellowing resistance has been formulated to cure instantly when exposed to high intensity ultraviolet light. This product is ideal for use as an adhesive and coating...展开 UV Cure 60-7180 is a one part, UV curable adhesive that is water clear and exhibits great yellowing resistance has been formulated to cure instantly when exposed to high intensity ultraviolet light. This product is ideal for use as an adhesive and coating on a wide variety of substrates. It can also be used in small potting applications as well as decorative clear doming on labels, pins, key fobs, magnets, etc. 收起 | |
| UV Cure 7155 | Epoxies, Etc. | UV Cure 7155 is a rigid, low intensity UV Curable Epoxy Resin. It is water clear and cures to a smooth, bubble free finish with good aging and yellowing resistance. It can be used as protective coating due to its ability to resist moisture, chemicals and ...展开 UV Cure 7155 is a rigid, low intensity UV Curable Epoxy Resin. It is water clear and cures to a smooth, bubble free finish with good aging and yellowing resistance. It can be used as protective coating due to its ability to resist moisture, chemicals and thermal shock. UV Cure 7155 may be used as decorative ultra clear doming resins on labels, pins, key fobs, magnets, ceramics, etc. 收起 | |
| UV Cure 7156 | Epoxies, Etc. | UV Cure 7156 is a Flexible, low intensity UV Curable Epoxy Resin. It is water clear and cures to a smooth, bubble free finish with good aging and yellowing resistance. It can be used as protective coating due to its ability to resist moisture, chemicals a...展开 UV Cure 7156 is a Flexible, low intensity UV Curable Epoxy Resin. It is water clear and cures to a smooth, bubble free finish with good aging and yellowing resistance. It can be used as protective coating due to its ability to resist moisture, chemicals and thermal shock. UV Cure 7156 may be used as decorative ultra clear doming resins on labels, pins, key fobs, magnets, ceramics, etc. 收起 |
