| ANTIGEL® | Bernd Schwegmann GmbH & Co. KG | Antigel®主要用于基于醇酸、醇酸/三聚氰胺、硝化纤维化合物和聚酯的含溶剂体系。Antigel®应用于基于醇酸或醇酸/丙烯酸的水稀释体系中，也具有上述性能 | |
| ANTIGEL® HS | Bernd Schwegmann GmbH & Co. KG | 具有良好润湿性和分散性的粘度稳定剂，尤其适合高固体份涂料体系，不含酮肟和芳香族化合物，可生物降解 | |
| ANTIGEL® KF | Bernd Schwegmann GmbH & Co. KG | ANTIGEL® KF是一种多功能助剂，适合溶剂型和水性涂料体系。它不含酮肟和芳香族化合物，可生物降解。ANTIGEL® KF-D的多功能性源于各组分的协同增效作用。其稳定作用基于抗氧化剂的氧结合特性。ANTIGEL® KF-D改善了流平性和全干性。ANTIGEL® KF-D降低常用亲水颜料和憎水基料之间的界面张力。颜料颗粒分布均匀，因而色度深。可减少分散时间、絮凝和沉降现象，提升光泽度。大大避免了沉降发生。由于它具有出色的润湿性，可获得最佳的颜色深度 | |
| ANTIGEL® KF-D | Bernd Schwegmann GmbH & Co. KG | Antigel® KF/KF-D可用于几乎所有常规水性和溶剂型油漆体系中 | |
| Benzidine Orange R | Emperor Pigment Co., Ltd. | Benzidine Orange R is a yellowish colored pigment that is used in solvent inks, aqueous inks, and aqueous coatings. It has a density value of 1.4 and a pH value of 7. This product has a color index number of Pigment Orange 16, a CAS number of 6505-28-8, a...展开 Benzidine Orange R is a yellowish colored pigment that is used in solvent inks, aqueous inks, and aqueous coatings. It has a density value of 1.4 and a pH value of 7. This product has a color index number of Pigment Orange 16, a CAS number of 6505-28-8, and an EU number of 229-388-1. 收起 | |
| Benzidine Yellow 121H | Emperor Pigment Co., Ltd. | Benzidine Yellow 121H is a pigment that is bright yellow in color. It has a color index number of Pigment Yellow 12, a CAS number of 6358-85-6, and an EU number of 228-787-8. This product has a density value of 1.5, a pH value of 6.0 to 7.0, and is used i...展开 Benzidine Yellow 121H is a pigment that is bright yellow in color. It has a color index number of Pigment Yellow 12, a CAS number of 6358-85-6, and an EU number of 228-787-8. This product has a density value of 1.5, a pH value of 6.0 to 7.0, and is used in PA inks, NC inks, PP inks, and Toluene based inks. 收起 | |
| Benzidine Yellow DHG | Emperor Pigment Co., Ltd. | Benzidine Yellow DHG is a bright yellow colored pigment that is used in offset inks and textile printing. It has a density value of 1.5 and a pH value of 6.0 to 7.0. This product has a color index number of Pigment Yellow 12, a CAS number of 6358-85-6, an...展开 Benzidine Yellow DHG is a bright yellow colored pigment that is used in offset inks and textile printing. It has a density value of 1.5 and a pH value of 6.0 to 7.0. This product has a color index number of Pigment Yellow 12, a CAS number of 6358-85-6, and an EU number of 228-787-8. 收起 | |
| Benzidine Yellow G | Emperor Pigment Co., Ltd. | Benzidine Yellow G is a pigment that is reddish yellow and transparent in color. It has a color index number of Pigment Yellow 12, a CAS number of 6358-85-6, and an EU number of 228-787-8. This product has a density value of 1.5, a pH value of 6.0 to 7.0,...展开 Benzidine Yellow G is a pigment that is reddish yellow and transparent in color. It has a color index number of Pigment Yellow 12, a CAS number of 6358-85-6, and an EU number of 228-787-8. This product has a density value of 1.5, a pH value of 6.0 to 7.0, and is used in offset inks, waterbased inks, and textile printing. 收起 | |
| Benzidine Yellow G-A | Emperor Pigment Co., Ltd. | Benzidine Yellow G-A is a pigment that is reddish yellow in color. It has a color index number of Pigment Yellow 12, a CAS number of 6358-85-6, and an EU number of 228-787-8. This product has a density value of 1.5, a pH value of 6.0 to 7.0, and is used i...展开 Benzidine Yellow G-A is a pigment that is reddish yellow in color. It has a color index number of Pigment Yellow 12, a CAS number of 6358-85-6, and an EU number of 228-787-8. This product has a density value of 1.5, a pH value of 6.0 to 7.0, and is used in offset inks, waterbased inks, and textile printing. 收起 | |
| Benzidine Yellow G-B | Emperor Pigment Co., Ltd. | Benzidine Yellow G-B is a greenish yellow and semitransparent colored pigment that is used in offset inks, waterbased inks, and textile printing. It has a color index number of Pigment Yellow 12, a CAS number of 6358-85-6, and an EU number of 228-787-8. T...展开 Benzidine Yellow G-B is a greenish yellow and semitransparent colored pigment that is used in offset inks, waterbased inks, and textile printing. It has a color index number of Pigment Yellow 12, a CAS number of 6358-85-6, and an EU number of 228-787-8. This product has a density value of 1.5 and a pH value of 6.0 to 7.0. 收起 | |
| Benzimidazolone Orange | Emperor Pigment Co., Ltd. | Benzimidazolone Orange is a pigment that is orange in color. It has a color index number of Pigment Orange 64 and a CAS number of 72102-84-2. This product has a heat stability value of 250 degrees Celsius, an oil absorption value of 40 to 60 grams per 100...展开 Benzimidazolone Orange is a pigment that is orange in color. It has a color index number of Pigment Orange 64 and a CAS number of 72102-84-2. This product has a heat stability value of 250 degrees Celsius, an oil absorption value of 40 to 60 grams per 100 grams, and is used in paints and printing inks. 收起 | |
| Benzimidazolone Orange HL | Emperor Pigment Co., Ltd. | Benzimidazolone Orange HL is an orange colored pigment that is used in offset inks, solvent inks, aqueous inks, and paints. It has a color index number of Pigment Orange 36, a CAS number of 12236-62-3, and an EU number of 235-462-4. This product has a den...展开 Benzimidazolone Orange HL is an orange colored pigment that is used in offset inks, solvent inks, aqueous inks, and paints. It has a color index number of Pigment Orange 36, a CAS number of 12236-62-3, and an EU number of 235-462-4. This product has a density value of 1.4 and a pH value of 6.5. 收起 | |
| BLISTER FREE 3 | Bernd Schwegmann GmbH & Co. KG | Blister Free 3可用于含溶剂和水稀释体系。在含溶剂体系中，Blister Free 3作为消泡剂尤为有效，也可部分作为流平剂。它适用于以下基料：醇酸、醇酸/聚酯-、不饱和聚酯-、NC-、AC-、PU和丙烯酸体系。Blister Free 3在水稀释涂料体系中也非常有效，尤其是基于醇酸/丙烯酸、饱和聚酯和环氧体系 | |
| BLISTER FREE 45 | Bernd Schwegmann GmbH & Co. KG | Blister Free 45在以下溶剂型体系中具有良好的消泡效果，基于硝基纤维素、酸催化、通用聚氨酯。Blister Free 45对于水稀释涂料也具有非常好的消泡效果，基于以下基料：聚酯、酸性树脂、丙烯酸 | |
| BLISTER FREE 54 | Bernd Schwegmann GmbH & Co. KG | Blister Free 54可有效应用于几乎所有含溶剂单或多组分油漆和涂料体系，包括自干和烘烤醇酸、环氧体系、PU体系、丙烯酸，特殊的应用领域是印刷油墨和卷材涂料体系 | |
| BLISTER FREE 55 | Bernd Schwegmann GmbH & Co. KG | Blister Free 55在各种水性醇酸体系中具有出色的消泡效果，例如那些中和后变水溶性，以及在醇酸乳液中，含或不含助溶剂的。在很多改性醇酸和醇酸/丙烯酸混合体系中也具有非常好的消泡效果 | |
| BLISTER FREE 56 | Bernd Schwegmann GmbH & Co. KG | Blister Free 56 可用于UV固化体系。它可用于下面提到的水稀释体系。Blister Free 56具有良好的消泡效果，它在这些体系：醇酸/丙烯酸油漆、饱和聚酯、环氧中有部分流平功能 | |
| BLISTER FREE 66 | Bernd Schwegmann GmbH & Co. KG | Blister Free 66可作为消泡剂应用于所有常规涂料体系中。Blister Free 66 在基于聚酯、聚氨酯和丙烯酸酯的体系中尤为有效 | |
| BLISTER FREE 75 | Bernd Schwegmann GmbH & Co. KG | Blister Free 75在常规NC体系和NC混合体系、AC和环氧体系、PU和自干丙烯酸体系中具有良好的消泡效果。Blister Free 75在基于以下基料：长油度醇酸、中油度醇酸、丙烯酸酯/中油度醇酸、丙烯酸酯/长油度醇酸、环氧的水稀释涂料体系中具有非常好的消泡效果 | |
| BLISTER FREE 77 | Bernd Schwegmann GmbH & Co. KG | 完全消泡是形成一个出色涂膜的必要条件。吸附的空气、针孔会导致灰尘粘附并造成喷涂面漆和抛光操作困难。除了导致这些表面缺陷，它也经常会降低光泽和耐水性。Blister Free 77可相当大程度上减少气泡形成，造成强烈消泡，并均一地形成不饱和聚酯蜡层 | |
| BLISTER FREE 88 | Bernd Schwegmann GmbH & Co. KG | Blister Free 88是一种表面活性添加剂，会影响表面张力。该性能可减少在油漆的生产或施工过程中气泡的形成。任何形成的气泡都可被快速摧毁。通常Blister Free 88对涂膜流平具有良好的效果 | |
| CCR 110 | CINKARNA | CCR is an ultrafine, nanoparticle version of a rutile titanium dioxide pigment. This product has been surface modified. It can be used in transparent UV coatings for various substrates. | |
| CCR 130 | CINKARNA | CCR 130 is an ultrafine, nanoparticle version of a rutile titanium dioxide pigment. This product has been surface modified. It can be used in transparent UV coatings for various substrates. | |
| CCR 150 | CINKARNA | CCR 150 is an ultrafine, nanoparticle version of a rutile titanium dioxide pigment. This product has been surface-modified. It can be used in transparent UV coatings for various substrates. | |
| CF1-135 | NuSil Silicone Technology 1 | CF1-135 is high technology translucent silicone primer that is specifically formulated for use with platinum cured systems where conventional primers are insufficient. This product can help improve the adhesion of addition-cured systems to different subst...展开 CF1-135 is high technology translucent silicone primer that is specifically formulated for use with platinum cured systems where conventional primers are insufficient. This product can help improve the adhesion of addition-cured systems to different substrates such as metals, ceramics, glass, some plastics and other silicone material. It is a one-component primer that is supplied in VM&P Napththa and it requires no mixing. 收起 | |
| CF1-141 | NuSil Silicone Technology 1 | CF1-141 is a high technology silicone primer that is specially formulated to be used with platinum-cured systems and is colored red to provide an easy visual determination of surface coverage. It is a lower Volatile Organic Component (VOC) product and air...展开 CF1-141 is a high technology silicone primer that is specially formulated to be used with platinum-cured systems and is colored red to provide an easy visual determination of surface coverage. It is a lower Volatile Organic Component (VOC) product and air dries. This primer improves adhesion of addition-cured systems to various substrates such as glass, metals, plastics, ceramics and other silicone materials. 收起 | |
| CF1-3510 | NuSil Silicone Technology 1 | CF1-3510 is a fluorosilicone potting and encapsulating elastomer that cures with the addition of heat. It is best used for applications that require solvent resistance and for molding parts such as stoppers, o-rings, and seals. This product can also be us...展开 CF1-3510 is a fluorosilicone potting and encapsulating elastomer that cures with the addition of heat. It is best used for applications that require solvent resistance and for molding parts such as stoppers, o-rings, and seals. This product can also be used as an encapsulating, potting and sealing material and it is best used in applications requiring an operating temperature range of -65°C to 240°C (-85°F to 465°F). 收起 | |
| CF1-3710-2 | NuSil Silicone Technology 1 | CF1-3710-2 is a fluorosilicone foam that has a 1:1 ratio with a white Part A and gray Part B for easy identification and mixing. This product cures very quickly at room temperature to an elastomeric foam. It can be used as a solvent resistant seal or in s...展开 CF1-3710-2 is a fluorosilicone foam that has a 1:1 ratio with a white Part A and gray Part B for easy identification and mixing. This product cures very quickly at room temperature to an elastomeric foam. It can be used as a solvent resistant seal or in shock and vibration dampening situations that require a flexible, light weight foam with exceptional radiation resistance and thermal insulation. This foam is especially useful where stability at higher and lower temperatures is required. 收起 | |
| CF1-3800 | NuSil Silicone Technology 1 | CF1-3800 is a thermally conductive, fluorosilicone elastomer that cures at room temperature, or rapidly with the addition of heat. It can be used to adhere covers on housings, modules, and other configurations that require a non-flowable material. This pr...展开 CF1-3800 is a thermally conductive, fluorosilicone elastomer that cures at room temperature, or rapidly with the addition of heat. It can be used to adhere covers on housings, modules, and other configurations that require a non-flowable material. This product can also be utilized as an adhesive, sealant or molding material when solvent resistance is needed. It can provide the transfer of heat between electrical components and heat sinks, and can operate at a temperature range of -65°C to 225°C (-85°F to 437°F). 收起 | |
| CF19-2186 | NuSil Silicone Technology 1 | CF19-2186 is a general purpose silicone elastomer that has a medium cure rate and is provided in mix and dispense applicators. This product can provide protection for assemblies and electronic components against, vibration, shock, ozone, moisture, dust an...展开 CF19-2186 is a general purpose silicone elastomer that has a medium cure rate and is provided in mix and dispense applicators. This product can provide protection for assemblies and electronic components against, vibration, shock, ozone, moisture, dust and other contaminants. It can also be utilized as an encapsulating or potting material, and can replicate surfaces and devices. 收起 | |
| CF19-2615 | NuSil Silicone Technology 1 | CF19-2615 is a two-part, silicone elastomer that is optically clear and solvent free. It cures at room temperature or rapidly with the addition of heat. This product can be use for photonics applications such as photo detectors, HBLEDs, lasers, flat panel...展开 CF19-2615 is a two-part, silicone elastomer that is optically clear and solvent free. It cures at room temperature or rapidly with the addition of heat. This product can be use for photonics applications such as photo detectors, HBLEDs, lasers, flat panel displays and discrete optics that require a 1.41 refractive index. It can also provide protection to electronic components and assemblies against vibration, shock, moisture, dust and other environmental hazards. 收起 | |
| CF2-135 | NuSil Silicone Technology 1 | CF2-135 is a silicone primer that is specifically designed to be used with platinum-cured systems where conventional primers will not be sufficient. This product will help to improve the adhesion of addition-cured systems to various substrates such as woo...展开 CF2-135 is a silicone primer that is specifically designed to be used with platinum-cured systems where conventional primers will not be sufficient. This product will help to improve the adhesion of addition-cured systems to various substrates such as wood, metals, ceramics, plastics, and other silicone materials. For the best bonding results, be sure that the surface being primed is clean and degreased. 收起 | |
| CF2-3521 | NuSil Silicone Technology 1 | CF2-3521 is a translucent fluorosilicone elastomer that cures rapidly with heat from an oven or heating lamp, or at room temperature. It can be utilized in applications that would require a good solvent resistance. This product is especially useful for mo...展开 CF2-3521 is a translucent fluorosilicone elastomer that cures rapidly with heat from an oven or heating lamp, or at room temperature. It can be utilized in applications that would require a good solvent resistance. This product is especially useful for molding parts such as O-rings, stoppers, and seals. 收起 | |
| CF2-3521-2 | NuSil Silicone Technology 1 | CF2-3521-2 is a two part, black, 50 mole % fluorosilicone elastomer that cures at room temperature, or rapidly with heat from a heating lamp or oven. This product can be especially useful for molding parts such as stoppers, seals, and O-rings. It can also...展开 CF2-3521-2 is a two part, black, 50 mole % fluorosilicone elastomer that cures at room temperature, or rapidly with heat from a heating lamp or oven. This product can be especially useful for molding parts such as stoppers, seals, and O-rings. It can also be used in applications that would require a solvent resistance. 收起 | |
| CF3-3521 | NuSil Silicone Technology 1 | CF3-3521 is a fluorosilicone elastomer that can be used with with liquid injection molding equipment. It is an exceptional product to use for molding high quality parts such as gaskets, seals and o-rings. It is also ideal for applications that require a m...展开 CF3-3521 is a fluorosilicone elastomer that can be used with with liquid injection molding equipment. It is an exceptional product to use for molding high quality parts such as gaskets, seals and o-rings. It is also ideal for applications that require a medium hardness silicone and solvent resistance. This product is best utilized in applications that require an operating temperature range of -65 to 240°C (-85 to 465°F). 收起 | |
| CF5-3521-2 | NuSil Silicone Technology 1 | CF5-3521-2 is a two part, 50 mole % fluorosilicone that has a 1:1 Mix Ratio (Part A:B). It can be cured at room temperature, or more rapidly by heating it in an oven or with a heating lamp. The product is especially useful as a coating, sealant, adhesive ...展开 CF5-3521-2 is a two part, 50 mole % fluorosilicone that has a 1:1 Mix Ratio (Part A:B). It can be cured at room temperature, or more rapidly by heating it in an oven or with a heating lamp. The product is especially useful as a coating, sealant, adhesive or molding material in applications that require solvent resistance. 收起 | |
| CF6-135 | NuSil Silicone Technology 1 | CF6-135 is a one-component, high technology silicone primer that is translucent to preserve visibility with translucent products. It is specially designed to be used with platinum cured systems where conventional primers are insufficient. This product wil...展开 CF6-135 is a one-component, high technology silicone primer that is translucent to preserve visibility with translucent products. It is specially designed to be used with platinum cured systems where conventional primers are insufficient. This product will improve the adhesion of addition-cured systems to many different substrates such as glass, metals, plastics, ceramics and other silicone material. 收起 | |
| Chicure® 2300 | Double Bond Chemical Ind., Co., Ltd. 双键化工股份有限公司 | Chicure® 2300 has various applications, It could be used as non-yellowing chain extender in PU application, curing agent in one pack epoxy resin, formaldehyde quenching agent, anti-NOx agent. | |
| Chicure® 764 | Double Bond Chemical Ind., Co., Ltd. 双键化工股份有限公司 | Chicure® 764 is an ammonium salt catalyst that decomposes to tertial amine during high temperature processes, reducing the reaction energy of carboxylic with epoxied group, lowering curing temperature. | |
| Chicure® 800 | Double Bond Chemical Ind., Co., Ltd. 双键化工股份有限公司 | Chicure® 800 is a non-toxic β-hydroxyalkylamide (HAA) type cross-linking agent for carboxyl functional polyester powder coatings. These coating systems suitable for exterior use exhibit low toxicity, no skin irritation, outstanding UV, hydrolytic, chalkin...展开 Chicure® 800 is a non-toxic β-hydroxyalkylamide (HAA) type cross-linking agent for carboxyl functional polyester powder coatings. These coating systems suitable for exterior use exhibit low toxicity, no skin irritation, outstanding UV, hydrolytic, chalking resistance as well as excellent gloss retention, fewer color deviation and supreme chalking resistance after a long-term exposure. 收起 | |
| Chicure® AAA | Double Bond Chemical Ind., Co., Ltd. 双键化工股份有限公司 | Chicure® AAA is a white crystalline powder that is soluble in benzene, toluene, and xylene. It is used as a hardening accelerator for epoxy, phenol, silicone, and acrylic resins. | |
| Chicure® TPP | Double Bond Chemical Ind., Co., Ltd. 双键化工股份有限公司 | Chicure® TPP is a widely used metal complex and phase transfer catalysts for organic and polymerization reactions. | |
| Chimatt® 1000 | Double Bond Chemical Ind., Co., Ltd. 双键化工股份有限公司 | 环氧体系用最受欢迎消光剂的一种。它是一种多羧酸和咪唑啉的单盐。使用CHIMATT 1000的纯环氧或环氧/聚酯配方体系具有良好的消光效果，可消至低光（<20%），并具有出色的流平性。涂膜颜色和物理性能可一定程度上通过颜料和填料来控制。 | |
| Chimatt® 1200 | Double Bond Chemical Ind., Co., Ltd. 双键化工股份有限公司 | 含缩水甘油基官能团的丙烯酸树脂。它设计作为一步法户外消光剂，用于羧基聚酯树脂粉末涂料体系。基于CHIMATT® 1200 的涂料具有出众的机械性能和户外耐候性 | |
| Chimatt® 766 | Double Bond Chemical Ind., Co., Ltd. 双键化工股份有限公司 | 固体颜色稳定的消光剂，适用于室内和户外用环氧和聚酯粉末涂料。除对流平性、雾影或耐候性无负面影响外，Chimatt 766用于粉末涂料的最重要的优点是涂料的机械性能完全不会改变或只改变很小的程度，取决于聚酯类型 | |
| Chimatt® 900 | Double Bond Chemical Ind., Co., Ltd. 双键化工股份有限公司 | 环氧体系用最常使用的消光剂的一种。它是一种多羧酸和咪唑啉的二盐。使用CHIMATT 900的纯环氧或环氧/聚酯配方体系具有良好的消光效果，可消至半光（通常20-100%），并具有出色的流平性。涂膜颜色和物理性能可一定程度上通过颜料和填料来控制。 | |
| Chinox® 1010 | Double Bond Chemical Ind., Co., Ltd. 双键化工股份有限公司 | 高分子量位阻酚抗氧化剂。由于其特殊的化学结构和低挥发性，Chinox® 1010具有出色的抗氧化效果、热稳定性、耐萃取性以及与树脂良好的相容性 | |
| Chinox® 1024 | Double Bond Chemical Ind., Co., Ltd. 双键化工股份有限公司 | 一种高效的金属钝化剂，可与金属尤其是和铜离子形成稳定的复合体。因而，使用Chinox® 1024可大幅提高聚合物和铜接触的稳定性。 | |
| Chinox® 1076 | Double Bond Chemical Ind., Co., Ltd. 双键化工股份有限公司 | 位阻酚抗氧化剂，可保护一系列有机物和聚合物基材，例如塑料、人造纤维、弹性体、PU、TPU。由于其特殊的化学结构和低挥发性，Chinox® 1076具有非常高的性能，包括抗氧化效果、长期热稳定性、不变色性能、耐萃取性以及与大多数基材的相容性 | |
| Chinox® 1098 | Double Bond Chemical Ind., Co., Ltd. 双键化工股份有限公司 | 一种聚合物抗氧化剂，特别开发用于尼龙、聚酰胺聚合物。 | |
| Chinox® 1330 | Double Bond Chemical Ind., Co., Ltd. 双键化工股份有限公司 | 常规聚合物抗氧化剂，主要开发用于PE/PP和其它工程塑料，如：汽车工业用PE/PP、热水管、可交联PE，具有高耐温性。 | |
| Chinox® 1677 | Double Bond Chemical Ind., Co., Ltd. 双键化工股份有限公司 | 抗氧化剂和光稳定剂的混合物，Chinox® 1677保护石油树脂避免氧化和光下暴晒。外观：白色粉末，挥发份含量最大0.5%。Chinox® 1677可用于石油树脂，应保存于紧密密封的容器中，放置在通风良好、阴凉干燥的位置，避免阳光直射和受热 | |
| Chinox® 168 | Double Bond Chemical Ind., Co., Ltd. 双键化工股份有限公司 | 固体亚磷酸盐加工稳定剂，具有低挥发性和杰出的水解稳定性。该二级抗氧化剂可提供出色的热稳定性和抗氧化性，良好的树脂相容性和出色的耐萃取性能。 | |
| Chinox® 1790 | Double Bond Chemical Ind., Co., Ltd. 双键化工股份有限公司 | 一种出色的抗氧化剂，主要设计用于PU、PE、PP以及其它耐高温工程塑料，如弹性PU、TPU。 | |
| Chinox® 2174 | Double Bond Chemical Ind., Co., Ltd. 双键化工股份有限公司 | 位阻酚抗氧化剂，可保护一系列有机物和聚合物基材，例如塑料、人造纤维、弹性体、PU、TPU。由于其特殊的化学结构和低挥发性，Chinox 2174具有非常高的性能，包括抗氧化效果、长期热稳定性、不变色性能、耐萃取性以及与大多数基材的相容性 | |
| Chinox® 2245 | Double Bond Chemical Ind., Co., Ltd. 双键化工股份有限公司 | 高分子量位阻酚类抗氧剂混合物。由于结构特殊和分解温度高，Chinox® 2245具有非常好的耐热性。其特征为出色的抗氧化效果、热稳定性、耐萃取性以及与树脂具有良好的相容性 | |
| Chinox® 245 | Double Bond Chemical Ind., Co., Ltd. 双键化工股份有限公司 | 高分子量位阻酚抗氧化剂。由于其特殊的化学结构和低挥发性，Chinox® 245具有出色的抗氧化效果、热稳定性、耐萃取性以及与树脂良好的相容性 | |
| Chinox® 246 | Double Bond Chemical Ind., Co., Ltd. 双键化工股份有限公司 | 一种出色的不变色不污染的空间位阻酚稳定剂。 | |
| Chinox® 246L | Double Bond Chemical Ind., Co., Ltd. 双键化工股份有限公司 | 丁醇改性的酚类抗氧化剂乳液，特别设计用于水性树脂的合成和加工过程，例如NBR/SBR/MBS乳胶，ABS 乳液聚合，水性PU。Chinox 246L保护上述聚合物免受氧化伤害，可避免黄变、脆化和开裂问题 | |
| Chinox® 246T | Double Bond Chemical Ind., Co., Ltd. 双键化工股份有限公司 | 一种出色的不变色不污染的空间位阻酚稳定剂。 | |
| Chinox® 248 | Double Bond Chemical Ind., Co., Ltd. 双键化工股份有限公司 | 一种出色的不变色不污染的空间位阻酚稳定剂。 | |
| Chinox® 300 | Double Bond Chemical Ind., Co., Ltd. 双键化工股份有限公司 | 酚类硫醚抗氧化剂，能为塑料提供保护，在塑料加工过程中提供抗氧化性和防止黄变。能广泛的应用于交联聚乙烯电缆配方以及用于松香。与DLTDP和DSTDP共同使用具有良好的协同效应 | |
| Chinox® 3114 | Double Bond Chemical Ind., Co., Ltd. 双键化工股份有限公司 | 一种抗氧化剂，特别开发用于PE/PP，以及工程塑料，耐高温。 | |
| Chinox® 35 | Double Bond Chemical Ind., Co., Ltd. 双键化工股份有限公司 | 一种出色的受阻酚类抗氧化剂，设计用于各种聚合物。特别适用于PU体系，如PU泡沫材料、皮革涂料、薄膜等。由于其化学结构特殊、挥发性低、具有更好的溶剂可溶性和良好的树脂相容性，Chinox® 35保护聚合物时具有出色的加工和长期热稳定性。 | |
| Chinox® 3520 | Double Bond Chemical Ind., Co., Ltd. 双键化工股份有限公司 | 液体酚类抗氧化剂，可用于弹性体、塑料、胶粘剂、密封剂、油和滑润剂等有机基材。能有效保护基材免受加工过程和长时间热老化的热氧化降解伤害。Chinox® 3520具有耐污染、不变色、低挥发和光热稳定的特性 | |
| Chinox® 4018 | Double Bond Chemical Ind., Co., Ltd. 双键化工股份有限公司 | 丁羟基苯酚抗氧化剂，开发用于水性体系树脂，如PVC聚合、SBR/MBS乳胶、ABS乳液聚合、水性PU。它可保护免受氧化伤害，可避免黄变、脆化和开裂问题 | |
| Chinox® 5018 | Double Bond Chemical Ind., Co., Ltd. 双键化工股份有限公司 | 设计用于水性体系树脂，如：PVC聚合、 SBR/MBS乳胶、ABS乳液聚合、水性PU。它可保护免受氧化伤害，可避免黄变、脆化和开裂问题 | |
| Chinox® 5726 | Double Bond Chemical Ind., Co., Ltd. 双键化工股份有限公司 | 固体酚抗氧化剂，适合用作有机聚合物的稳定剂，例如胶粘材料特别是热熔性、溶剂型和水性胶粘剂，可用于如SBS和SIS的嵌段共聚物，也可用于如PUR密封剂的PUR产品 | |
| Chinox® 618 | Double Bond Chemical Ind., Co., Ltd. 双键化工股份有限公司 | 高性能色彩稳定剂，用于聚烯烃、聚酯、弹性体、苯乙烯、工程热塑料和胶粘剂配方 | |
| Chinox® 626 | Double Bond Chemical Ind., Co., Ltd. 双键化工股份有限公司 | Chinox® 626 is a high performance solid organophosphite antioxidant for polymers. It is the most effective phosphite in protecting polymers during processing and in lifetime. In addition this, Chinox® 626 acts in improving the discoloration of polymer art...展开 Chinox® 626 is a high performance solid organophosphite antioxidant for polymers. It is the most effective phosphite in protecting polymers during processing and in lifetime. In addition this, Chinox® 626 acts in improving the discoloration of polymer articles exposed to Nitrogen Oxides and in enhancing the UV resistance. 收起 | |
| Chinox® 62S | Double Bond Chemical Ind., Co., Ltd. 双键化工股份有限公司 | 高性能固体有机亚磷酸盐抗氧化剂，是聚合物的抗水解助剂。它是在加工过程和长期保护聚合物过程中最有效的亚磷酸盐。另外，Chinox®62S 能改善聚合物暴露于氮氧化物中的变色性，提高耐紫外光能力 | |
| Chinox® 7 | Double Bond Chemical Ind., Co., Ltd. 双键化工股份有限公司 | 丁羟基苯酚低聚物抗氧化剂。 | |
| Chinox® 850 | Double Bond Chemical Ind., Co., Ltd. 双键化工股份有限公司 | Weston 619的防水解版本。由于Weston 619具有高抗氧化性，但缺乏水解稳定性，通过混合Chinox 1010及造粒，相比Weston 619，Chinox 850具有低起尘性能和更高的软化点，更适合用于大多数塑料加工过程。Chinox 850特别推荐用于涉及水分散和高水份含量的加工过程 | |
| Chinox® AO-40L | Double Bond Chemical Ind., Co., Ltd. 双键化工股份有限公司 | 丁醇改性的酚类抗氧化剂乳液，特别设计用于水性树脂的合成和加工过程，例如PVC聚合，SBR/MBS乳胶，ABS 乳液聚合，水性PU。Chinox AO-40L保护上述聚合物免受氧化伤害，可避免黄变、脆化和开裂问题 | |
| Chinox® AO-5400 | Double Bond Chemical Ind., Co., Ltd. 双键化工股份有限公司 | 丁醇改性的酚类抗氧化剂，特别设计用于水性树脂，例如PVC聚合，SBR/MBS乳胶，ABS 乳液聚合和水性PU。它可保护基材免受氧化伤害，可避免黄变、脆化和开裂问题 | |
| Chinox® AO-602L | Double Bond Chemical Ind., Co., Ltd. 双键化工股份有限公司 | 设计用于水性体系树脂，如：PVC聚合、 SBR/MBS乳胶、ABS乳液聚合、水性PU。 | |
| Chinox® B1004 | Double Bond Chemical Ind., Co., Ltd. 双键化工股份有限公司 | 抗氧剂混合物，建议用于SBS溶液聚合反应。Chinox® B1004能阻止烘箱烘烤过程中发生的黄变，同时预防高温加工过程中凝胶的形成 | |
| Chinox® B1026G | Double Bond Chemical Ind., Co., Ltd. 双键化工股份有限公司 | CHINOX®B1026G是一种新型受阻酚抗氧化剂。它可以有效地保护塑料，防止老化和黄化，并保持其物理性能。CHINOX®B1026G同时可以提供抗水解性和去离子能力。 | |
| Chinox® B1171 | Double Bond Chemical Ind., Co., Ltd. 双键化工股份有限公司 | 具有一级和二级抗氧化剂协同作用的优点，可用作塑料制造业中的加工助剂。 | |
| Chinox® B1411 | Double Bond Chemical Ind., Co., Ltd. 双键化工股份有限公司 | 具有一级和二级抗氧化剂协同作用的优点，可用作塑料制造业中的加工助剂。 | |
| Chinox® B1412 | Double Bond Chemical Ind., Co., Ltd. 双键化工股份有限公司 | 一种常规的Chinox B1412聚合物抗氧化剂，具有一级和二级抗氧化剂协同作用的优点，可用作塑料制造业中的加工助剂。 | |
| Chinox® B1688 | Double Bond Chemical Ind., Co., Ltd. 双键化工股份有限公司 | CHINOX® B 1688是一种新发明的高效抗氧化剂，它使用初级和二级协同抗氧化剂，作为塑料制造中的加工助剂。它可提供改进的熔融流动控制，浅初始颜色和出色的色彩维护，在高加工温度下具有优越的效能，成本和性能优势。本产品特别推荐用于聚烯烃中，推荐用量为0.05-0.3份。 | |
| Chinox® B1692 | Double Bond Chemical Ind., Co., Ltd. 双键化工股份有限公司 | 一种出色的受阻酚类抗氧剂，设计用于各种聚合物。特别适用于PU体系，如PU泡沫材料、皮革涂料、薄膜等。因其化学结构特殊、挥发性低、具有更好的溶剂溶解度和良好的树脂相容性，Chinox® B1692在聚合物保护方面展示出了出色的加工和长期热稳定性。 | |
| Chinox® B1851 | Double Bond Chemical Ind., Co., Ltd. 双键化工股份有限公司 | CHINOX®B1851专门为改善回收PE, PP以及和其他塑料混合的聚烯烃混合物的机械性和加工型而设计的添加剂。 | |
| Chinox® B215 | Double Bond Chemical Ind., Co., Ltd. 双键化工股份有限公司 | 具有一级和二级抗氧化剂协同作用的优点，可用作塑料制造业中的加工助剂。 | |
| Chinox® B225 | Double Bond Chemical Ind., Co., Ltd. 双键化工股份有限公司 | Chinox® B225具有一级和二级抗氧化剂协同作用的优点，可用作塑料制造业中的加工助剂。 | |
| Chinox® B245 | Double Bond Chemical Ind., Co., Ltd. 双键化工股份有限公司 | 具有一级和二级抗氧化剂协同作用的优点，可用作塑料制造业中的加工助剂。 | |
| Chinox® B300 | Double Bond Chemical Ind., Co., Ltd. 双键化工股份有限公司 | 位阻酚抗氧化剂、亚磷酸盐稳定剂和专利中心碳自由基清除剂的协同混合物。作为多官能团抗氧化剂，Chinox® B300可为PP、PE、PB、苯乙烯和胶粘剂等各种聚合物提供杰出的性能 | |
| Chinox® B31 | Double Bond Chemical Ind., Co., Ltd. 双键化工股份有限公司 | 具有一级和二级抗氧化剂协同作用的优点，可用作塑料制造业中的加工助剂。 | |
| Chinox® B41 | Double Bond Chemical Ind., Co., Ltd. 双键化工股份有限公司 | 具有一级和二级抗氧化剂协同作用的优点，可用作塑料制造业中的加工助剂。 | |
| Chinox® B43 | Double Bond Chemical Ind., Co., Ltd. 双键化工股份有限公司 | 具有一级和二级抗氧化剂协同作用的优点，可用作塑料制造业中的加工助剂。 | |
| Chinox® B561 | Double Bond Chemical Ind., Co., Ltd. 双键化工股份有限公司 | 具有一级和二级抗氧化剂协同作用的优点，可用作塑料制造业中的加工助剂。 | |
| Chinox® B640 | Double Bond Chemical Ind., Co., Ltd. 双键化工股份有限公司 | 具有一级和二级抗氧化剂协同作用的优点，可用作塑料制造业中的加工助剂。 | |
| Chinox® B900 | Double Bond Chemical Ind., Co., Ltd. 双键化工股份有限公司 | 具有一级和二级抗氧化剂协同作用的优点，可用作塑料制造业中的加工助剂。 | |
| Chinox® B921 | Double Bond Chemical Ind., Co., Ltd. 双键化工股份有限公司 | Chinox B921具有一级和二级抗氧化剂协同作用的优点，可用作塑料制造业中的加工助剂。 | |
| Chinox® DLTDP | Double Bond Chemical Ind., Co., Ltd. 双键化工股份有限公司 | 用于聚烯烃和其它聚合物体系的硫酯抗氧化剂。适用于保护塑料、橡胶、人造纤维、脂肪、油和石油产品以避免脱色、老化和腐臭。常用作增效剂结合酚类抗氧化剂使用，可提高聚乙烯、聚丙烯、聚乙烯和人造橡胶的长期耐环境老化性能 | |
| Chinox® DP | Double Bond Chemical Ind., Co., Ltd. 双键化工股份有限公司 | 一种抗氧化剂，用于环氧树脂、ABS和其他的工程塑料，耐高温。因其特殊结构和高含磷量，Chinox DP也可作为阻燃剂用于PCB等电子元件使用的纺织品和环氧树脂。 | |
| Chinox® DSTDP | Double Bond Chemical Ind., Co., Ltd. 双键化工股份有限公司 | 用于聚烯烃和其它聚合物体系的硫酯抗氧化剂。常作为增效剂结合酚类抗氧化剂使用，可用于聚乙烯(聚乙烯电力电缆、XLPE电力电缆、HDPE管)，聚丙烯，汽车引擎用聚烯烃，胶粘剂和人造橡胶，提高长期耐环境老化性能。允许用于生产食品包装材料 | |
| Chinox® F57 | Double Bond Chemical Ind., Co., Ltd. 双键化工股份有限公司 | Chinox® F57 is a liquid aromatic amine antioxidant designed for various polymers, such as polyols and polyurethane. The low volatility and liquid nature of this product makes it ideally suited to many substrates and applications. | |
| Chinox® GM | Double Bond Chemical Ind., Co., Ltd. 双键化工股份有限公司 | 一种出色的不变色不污染的空间受阻酚类抗氧化剂，可清除烷基自由基，类似于自由基清除剂。可保护有机基材防止热氧化和热老化。因其热稳定和光照稳定性、低挥发性、低迁移性和耐萃取性能，该产品适用于热塑性塑料、人造橡胶和胶粘剂。 |
