| 205 | U.S. Zinc | 205 is a French Process in powder form, statistically measured zinc oxide formed from zinc metal. This grade is used by the zinc chemicals, paint/coating, ceramics industries, rubber, and in those applications where reasonable purity is required. 205 is a...展开 205 is a French Process in powder form, statistically measured zinc oxide formed from zinc metal. This grade is used by the zinc chemicals, paint/coating, ceramics industries, rubber, and in those applications where reasonable purity is required. 205 is available in a pelleted form (205P) and with surface treatment (205S). It has a surface area range of 4.0 to 6.0 m2 /g, a specific gravity of 5.6, and an apparent density (in powder form) of 20 to 40 and (in pellet form) of 50 to 85. 收起 | |
| 205H | U.S. Zinc | 205H is a small particle size French Process in powder form, statistically measured zinc oxide formed from zinc metal. It has a greater surface area and is used by the paint, latex, plastic, and zinc chemicals industries and in applications where moderate...展开 205H is a small particle size French Process in powder form, statistically measured zinc oxide formed from zinc metal. It has a greater surface area and is used by the paint, latex, plastic, and zinc chemicals industries and in applications where moderate purity and greater reactivity are required. Grade 205H is available in a pelleted form (205HS) and with surface treatment (205HS). 205H has a surface area range of 6.0 to 8.5 m2 /g, a specific gravity of 5.6, and an apparent density (in powder form) of 20 to 40 and (in pellet form) of 50 to 85. 收起 | |
| 205HSA | U.S. Zinc | 205HSA is an exceptionally small particle size French Process in powder form, statistically measured zinc oxide formed from zinc metal. It has a greater surface area and is used by the plastic, latex, and transparent rubber industries and in those applica...展开 205HSA is an exceptionally small particle size French Process in powder form, statistically measured zinc oxide formed from zinc metal. It has a greater surface area and is used by the plastic, latex, and transparent rubber industries and in those applications where great reactivity is required. 205HSA is obtainable with surface treatment (205HSA-S). It has a surface area range of 8.0 to 10.0 m2 /g, a specific gravity of 5.6, and an apparent density of 20 to 40 (pounds/ft3). 收起 | |
| 205L | U.S. Zinc | 205L is a large particle size French Process in powder form, statistically measured zinc oxide formed from zinc metal. It has a lower surface area and is used by the paint and ceramics industries and in those applications where benefits result from larger...展开 205L is a large particle size French Process in powder form, statistically measured zinc oxide formed from zinc metal. It has a lower surface area and is used by the paint and ceramics industries and in those applications where benefits result from larger than average particles. Grade 205L is available in a pelleted form (205LP) and with surface treatment (205LS). 205L has a surface area range of 3.0 to 5.0 m2 /g, a specific gravity of 5.6, and an apparent density (in powder form) of 20 to 40 and (in pellet form) of 50 to 85. 收起 | |
| 205XL | U.S. Zinc | 205XL is a large particle size French Process in powder form, statistically measured zinc oxide. 205XL is used by the electronics, coating, ceramics, and paint industries and in those applications which develop benefits from larger than average particles....展开 205XL is a large particle size French Process in powder form, statistically measured zinc oxide. 205XL is used by the electronics, coating, ceramics, and paint industries and in those applications which develop benefits from larger than average particles. It has a surface area range of 2.5 to 3.5 m2 /g, a specific gravity of 5.6, and an apparent density (in powder form) of 20 to 40 and (in pellet form) of 15 to 30. 收起 | |
| 210 | U.S. Zinc | 210 is a French Process in powder form, statistically measured zinc oxide formed from zinc metal. This grade is used by the zinc chemicals, rubber, tape/adhesives, oil additives, traffic paint, wire insulation, glass/ceramics, electrogalvanizing, brake li...展开 210 is a French Process in powder form, statistically measured zinc oxide formed from zinc metal. This grade is used by the zinc chemicals, rubber, tape/adhesives, oil additives, traffic paint, wire insulation, glass/ceramics, electrogalvanizing, brake lining, and agriculture industries and in applications where General purpose zinc oxide could be used. 210 is available in a pelleted form (210P) and with surface treatment (210S). It has a surface area range of 4.0 to 6.0 m2 /g, a specific gravity of 5.6, and an apparent density (in powder form) of 20 to 40 and (in pellet form) of 50 to 85. 收起 | |
| 210E | U.S. Zinc | 210E is common purpose French Process, in powder form, statistically measured zinc oxide formed from zinc metal. This grade is used in an assortment of applications, including electronics, brake lining, paint, zinc chemicals, coating, and rubber industrie...展开 210E is common purpose French Process, in powder form, statistically measured zinc oxide formed from zinc metal. This grade is used in an assortment of applications, including electronics, brake lining, paint, zinc chemicals, coating, and rubber industries. 210E is available in pelleted form (210E-P) and with surface treatment (210ES). It has a surface area range of 4.0 to 6.0 m2 /g, a specific gravity of 5.6, and an apparent density (in powder form) of 20 to 40 and (in pellet form) of 50 to 85. 收起 | |
| 210H | U.S. Zinc | 210H is a small particle French Process, in powder form, statistically measured zinc oxide formed from zinc metal. This grade has a higher surface area and reactivity and is used by the latex, paint, plastic, and zinc chemicals industries. 210H is availab...展开 210H is a small particle French Process, in powder form, statistically measured zinc oxide formed from zinc metal. This grade has a higher surface area and reactivity and is used by the latex, paint, plastic, and zinc chemicals industries. 210H is available in a pelleted form (210HP) and with surface treatment (210HS). It has a surface area range of 6.0 to 8.5 m2 /g, a specific gravity of 5.6, and an apparent density (in powder form) of 20 to 40 and (in pellet form) of 50 to 85. 收起 | |
| 210HSA | U.S. Zinc | 210HSA is an exceptionally small particle French Process, in powder form, statistically measured zinc oxide formed from zinc metal. This grade has a higher surface area and reactivity and is used by the plastic, latex, and transparent rubber industries an...展开 210HSA is an exceptionally small particle French Process, in powder form, statistically measured zinc oxide formed from zinc metal. This grade has a higher surface area and reactivity and is used by the plastic, latex, and transparent rubber industries and in applications where high reactivity is required. 210HSA is available with surface treatment (210HSA-S). It has a surface area range of 8 to 10 m2 /g, a specific gravity of 5.6, and an apparent density (in powder form) of 20 to 40. 收起 | |
| 210L | U.S. Zinc | 210L is a large particle French Process, in powder form, statistically measured zinc oxide formed from zinc metal. This grade has a lower surface area and is used by the ceramics and paint industries. 210L is available in a pelleted form (210LP) and with ...展开 210L is a large particle French Process, in powder form, statistically measured zinc oxide formed from zinc metal. This grade has a lower surface area and is used by the ceramics and paint industries. 210L is available in a pelleted form (210LP) and with surface treatment (210LS). It has a surface area range of 3.0 to 5.0 m2 /g, a specific gravity of 5.6, and an apparent density (in powder form) of 20 to 40 and (in pellet form) of 50 to 85. 收起 | |
| Aromatic Urethane Hexaacrylate SM6329 | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | SM6329是一种芳香族聚氨酯六丙烯酸酯。它提供了很高的反应性和硬度，并提供了耐磨性和耐化学性。SM6329广泛用于UV固化涂料、粘合剂和油墨。 | |
| AZO66 | U.S. Zinc | AZO66 is an exceptionally pure French Process, in powder form, statistically measured zinc oxide formed from zinc metal. AZO66 provides greater color and is vastly efficient in white or light colored goods. This grade is used in the zinc chemical, paint/c...展开 AZO66 is an exceptionally pure French Process, in powder form, statistically measured zinc oxide formed from zinc metal. AZO66 provides greater color and is vastly efficient in white or light colored goods. This grade is used in the zinc chemical, paint/coating, ceramic, oil additive industries and in those applications where great purity is dire. Grade AZO66 is available in a pelleted form (AZO66P), in a treated pelleted form (AZO66PT), and with surface treatment (AZO66T). AZO66 has a surface area range of 4.0 to 6.0 m2 /g, a specific gravity of 5.6, and an apparent density (in powder form) of 20 to 40 and (in pellet form) of 50 to 85. 收起 | |
| AZO66L | U.S. Zinc | AZO66L is an exceptionally pure French Process, a large particle, statistically measured zinc oxide formed from zinc metal. This grade is used by the zinc chemical, paint, and coating industries and in those applications which stem from greater than norma...展开 AZO66L is an exceptionally pure French Process, a large particle, statistically measured zinc oxide formed from zinc metal. This grade is used by the zinc chemical, paint, and coating industries and in those applications which stem from greater than normal high purity particles. Grade AZO66L is available in a pelleted form (AZO66LP) and with the surface treatment (AZO66LT). AZO66L has a surface area range of 3.0 to 5.0 m2 /g, a specific gravity of 5.6, and an apparent density (in powder form) of 20 to 40 and (in pellet form) of 50 to 85. 收起 | |
| AZO66XL | U.S. Zinc | AZO66XL is an exceptionally pure French Process, a large particle, statistically measured zinc oxide formed from zinc metal. This grade is used by the electronic, ceramic, paint, and coating industries and in those applications which stem from greater tha...展开 AZO66XL is an exceptionally pure French Process, a large particle, statistically measured zinc oxide formed from zinc metal. This grade is used by the electronic, ceramic, paint, and coating industries and in those applications which stem from greater than normal high purity particles. AZO66XL has a surface area range of 2.5 to 3.5 m2 /g, a specific gravity of 5.6, and an apparent density (in powder form) of 20 to 40 and (in pellet form) of 15 to 30. 收起 | |
| AZO77H | U.S. Zinc | AZO77H is an exceptionally pure powder, small particle size French Process, statistically measured zinc oxide formed from zinc metal. It is used for the manufacture of various chemicals, in the plastic, paint, latex, and coating industries and in those ap...展开 AZO77H is an exceptionally pure powder, small particle size French Process, statistically measured zinc oxide formed from zinc metal. It is used for the manufacture of various chemicals, in the plastic, paint, latex, and coating industries and in those applications where high purity and reactivity is required. Grade AZO77H is available with surface treatment (AZO77HT). It has a surface area range of 6.0 to 8.5 m2 /g, a specific gravity of 5.6, and an apparent density of 20 to 40 (lbs. /cu. Ft.). 收起 | |
| AZO77HSA | U.S. Zinc | AZO77HSA is an exceptionally small particle size French Process in powder form, statistically measured zinc oxide formed from zinc metal. AZO77HSA was explicitly developed to have the highest viscosity, reactivity, purity, and fineness. This grade is used...展开 AZO77HSA is an exceptionally small particle size French Process in powder form, statistically measured zinc oxide formed from zinc metal. AZO77HSA was explicitly developed to have the highest viscosity, reactivity, purity, and fineness. This grade is used in can sealants, latex compounds, zinc chemicals, plastics, paint/coating, and in the food can liner coating industry where the particularly fine particles freely convert certain accessible soluble into white sulfide, thus avoiding discoloration of food from sulfides of tin or iron. AZO77HSA is available with surface treatment (AZO77HSA-T), has a surface area range of 8.0 to 10.0 m2 /g, a specific gravity of 5.6, and an apparent density of 20 to 40 (lbs. /cu. Ft.). 收起 | |
| Benzidine Orange R | Emperor Pigment Co., Ltd. | Benzidine Orange R is a yellowish colored pigment that is used in solvent inks, aqueous inks, and aqueous coatings. It has a density value of 1.4 and a pH value of 7. This product has a color index number of Pigment Orange 16, a CAS number of 6505-28-8, a...展开 Benzidine Orange R is a yellowish colored pigment that is used in solvent inks, aqueous inks, and aqueous coatings. It has a density value of 1.4 and a pH value of 7. This product has a color index number of Pigment Orange 16, a CAS number of 6505-28-8, and an EU number of 229-388-1. 收起 | |
| Benzidine Yellow 121H | Emperor Pigment Co., Ltd. | Benzidine Yellow 121H is a pigment that is bright yellow in color. It has a color index number of Pigment Yellow 12, a CAS number of 6358-85-6, and an EU number of 228-787-8. This product has a density value of 1.5, a pH value of 6.0 to 7.0, and is used i...展开 Benzidine Yellow 121H is a pigment that is bright yellow in color. It has a color index number of Pigment Yellow 12, a CAS number of 6358-85-6, and an EU number of 228-787-8. This product has a density value of 1.5, a pH value of 6.0 to 7.0, and is used in PA inks, NC inks, PP inks, and Toluene based inks. 收起 | |
| Benzidine Yellow DHG | Emperor Pigment Co., Ltd. | Benzidine Yellow DHG is a bright yellow colored pigment that is used in offset inks and textile printing. It has a density value of 1.5 and a pH value of 6.0 to 7.0. This product has a color index number of Pigment Yellow 12, a CAS number of 6358-85-6, an...展开 Benzidine Yellow DHG is a bright yellow colored pigment that is used in offset inks and textile printing. It has a density value of 1.5 and a pH value of 6.0 to 7.0. This product has a color index number of Pigment Yellow 12, a CAS number of 6358-85-6, and an EU number of 228-787-8. 收起 | |
| Benzidine Yellow G | Emperor Pigment Co., Ltd. | Benzidine Yellow G is a pigment that is reddish yellow and transparent in color. It has a color index number of Pigment Yellow 12, a CAS number of 6358-85-6, and an EU number of 228-787-8. This product has a density value of 1.5, a pH value of 6.0 to 7.0,...展开 Benzidine Yellow G is a pigment that is reddish yellow and transparent in color. It has a color index number of Pigment Yellow 12, a CAS number of 6358-85-6, and an EU number of 228-787-8. This product has a density value of 1.5, a pH value of 6.0 to 7.0, and is used in offset inks, waterbased inks, and textile printing. 收起 | |
| Benzidine Yellow G-A | Emperor Pigment Co., Ltd. | Benzidine Yellow G-A is a pigment that is reddish yellow in color. It has a color index number of Pigment Yellow 12, a CAS number of 6358-85-6, and an EU number of 228-787-8. This product has a density value of 1.5, a pH value of 6.0 to 7.0, and is used i...展开 Benzidine Yellow G-A is a pigment that is reddish yellow in color. It has a color index number of Pigment Yellow 12, a CAS number of 6358-85-6, and an EU number of 228-787-8. This product has a density value of 1.5, a pH value of 6.0 to 7.0, and is used in offset inks, waterbased inks, and textile printing. 收起 | |
| Benzidine Yellow G-B | Emperor Pigment Co., Ltd. | Benzidine Yellow G-B is a greenish yellow and semitransparent colored pigment that is used in offset inks, waterbased inks, and textile printing. It has a color index number of Pigment Yellow 12, a CAS number of 6358-85-6, and an EU number of 228-787-8. T...展开 Benzidine Yellow G-B is a greenish yellow and semitransparent colored pigment that is used in offset inks, waterbased inks, and textile printing. It has a color index number of Pigment Yellow 12, a CAS number of 6358-85-6, and an EU number of 228-787-8. This product has a density value of 1.5 and a pH value of 6.0 to 7.0. 收起 | |
| Benzimidazolone Orange | Emperor Pigment Co., Ltd. | Benzimidazolone Orange is a pigment that is orange in color. It has a color index number of Pigment Orange 64 and a CAS number of 72102-84-2. This product has a heat stability value of 250 degrees Celsius, an oil absorption value of 40 to 60 grams per 100...展开 Benzimidazolone Orange is a pigment that is orange in color. It has a color index number of Pigment Orange 64 and a CAS number of 72102-84-2. This product has a heat stability value of 250 degrees Celsius, an oil absorption value of 40 to 60 grams per 100 grams, and is used in paints and printing inks. 收起 | |
| Benzimidazolone Orange HL | Emperor Pigment Co., Ltd. | Benzimidazolone Orange HL is an orange colored pigment that is used in offset inks, solvent inks, aqueous inks, and paints. It has a color index number of Pigment Orange 36, a CAS number of 12236-62-3, and an EU number of 235-462-4. This product has a den...展开 Benzimidazolone Orange HL is an orange colored pigment that is used in offset inks, solvent inks, aqueous inks, and paints. It has a color index number of Pigment Orange 36, a CAS number of 12236-62-3, and an EU number of 235-462-4. This product has a density value of 1.4 and a pH value of 6.5. 收起 | |
| Bisphenol A Epoxy Diacrylate SM6104 | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | SM6104是标准双酚A环氧丙烯酸酯。它带来低粘度与浅色，并且提供高光泽，硬度和优良的耐化学性。本产品广泛应用于紫外线涂料、油墨和粘合剂等。 | |
| Bisphenol A Epoxy Resin SM601 | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Bisphenol A Epoxy Resin SM601 is a low molecular weight, transparent solid without obvious mechanical impurity. It can be used in anti-corrosive coatings, electrophoretic paint, powder coatings, baking paint, can paint and coil coatings. | |
| Bisphenol A Epoxy Resin SM601R | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Bisphenol A Epoxy Resin SM601R is a low molecular weight, transparent solid without obvious mechanical impurity. It can be used in anti-corrosive coatings, electrophoretic paint, powder coatings, baking paint, can paint and coil coatings. | |
| Bisphenol A Epoxy Resin SM602R | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Bisphenol A Epoxy Resin SM602R is a low molecular weight, transparent solid without obvious mechanical impurity. It can be used in anti-corrosive coatings, electrophoretic paint, powder coatings, baking paint, can paint and coil coatings. | |
| Bisphenol A Epoxy Resin SM603R | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Bisphenol A Epoxy Resin SM603R is a low molecular weight, transparent solid without obvious mechanical impurity. It can be used in anti-corrosive coatings, electrophoretic paint, powder coatings, baking paint, can paint and coil coatings. | |
| Bisphenol A Epoxy Resin SM603RP | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Bisphenol A Epoxy Resin SM603RP is a medium molecular weight, transparent solid without obvious mechanical impurity. It can be used in anti-corrosive coatings, electrophoretic paint, powder coatings, baking paint, can paint and coil coatings. | |
| Bisphenol A Epoxy Resin SM604R | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Bisphenol A Epoxy Resin SM604R is a medium molecular weight, transparent solid without obvious mechanical impurity. It can be used in anti-corrosive coatings, electrophoretic paint, powder coatings, baking paint, can paint and coil coatings. | |
| Bisphenol A Epoxy Resin SM607 | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Bisphenol A Epoxy Resin SM607 is a medium molecular weight, transparent solid without obvious mechanical impurity. It can be used in anti-corrosive coatings, electrophoretic paint, powder coatings, baking paint, can paint and coil coatings. | |
| Bisphenol A Epoxy Resin SM607R | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Bisphenol A Epoxy Resin SM607R is a high molecular weight, transparent solid without obvious mechanical impurity. It can be used in anti-corrosive coatings, electrophoretic paint, powder coatings, baking paint, can paint and coil coatings. | |
| Bisphenol A Epoxy Resin SM609 | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Bisphenol A Epoxy Resin SM609 is a high molecular weight, transparent solid without obvious mechanical impurity. It can be used in anti-corrosive coatings, electrophoretic paint, powder coatings, baking paint, can paint and coil coatings. | |
| Bisphenol A Epoxy Resin SM6091 | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Bisphenol A Epoxy Resin SM6091 is a high molecular weight, transparent solid without obvious mechanical impurity. It can be used in anti-corrosive coatings, electrophoretic paint, powder coatings, baking paint, can paint and coil coatings. | |
| Bisphenol A Epoxy Resin SM609R | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Bisphenol A Epoxy Resin SM609R is a high molecular weight, transparent solid without obvious mechanical impurity. It can be used in anti-corrosive coatings, electrophoretic paint, powder coatings, baking paint, can paint and coil coatings. | |
| Bisphenol A Epoxy Resin SM6101 | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Bisphenol A Epoxy Resin SM6101 is a transparent liquid without obvious mechanical impurity and a moderate viscosity. It can be used for the coatings industry. | |
| Bisphenol A Epoxy Resin SM618 | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Bisphenol A Epoxy Resin SM618 is a transparent liquid without obvious mechanical impurity and a low viscosity. It has good electric insulation and is used in solvent-free coatings, self-leveling coatings, electronic and electrical equipments, potting comp...展开 Bisphenol A Epoxy Resin SM618 is a transparent liquid without obvious mechanical impurity and a low viscosity. It has good electric insulation and is used in solvent-free coatings, self-leveling coatings, electronic and electrical equipments, potting compounds and laminated material. 收起 | |
| Bisphenol A Epoxy Resin SM634 | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Bisphenol A Epoxy Resin SM634 is an unmodified semi-solid diglycidyl ether of Bisphenol A. It is used in high solid protective coatings, tank linings, adhesives, coal tar based coatings and flooring. | |
| Bisphenol A Epoxy Resin SM634H | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Bisphenol A Epoxy Resin SM634H is a transparent semi-solid without obvious mechanical impurity. It is used in casting material, coatings and reinforced plastic products. | |
| Bisphenol A Epoxy Resin SM638 | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Bisphenol A Epoxy Resin SM638 is an unmodified semi-solid diglycidyl ether of Bisphenol A. It is used in high solid protective coatings, electrical castings and adhesives. | |
| Bisphenol A Epoxy Resin SM815CA | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Bisphenol A Epoxy Resin SM815CA is a transparent liquid without obvious mechanical impurity and a low viscosity. It has good electric insulation and is used in solvent-free coatings, self-leveling coatings, electronic and electrical equipments, potting co...展开 Bisphenol A Epoxy Resin SM815CA is a transparent liquid without obvious mechanical impurity and a low viscosity. It has good electric insulation and is used in solvent-free coatings, self-leveling coatings, electronic and electrical equipments, potting compounds and laminated material. 收起 | |
| Bisphenol A Epoxy Resin SM827 | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Bisphenol A Epoxy Resin SM827 is an unmodified high purity, medium viscosity, general purpose diglycidyl ether of Bisphenal A. It has lower viscosity, lower reactivity with amines and anhydrides. It is used in high solid solvent free coatings, potting, la...展开 Bisphenol A Epoxy Resin SM827 is an unmodified high purity, medium viscosity, general purpose diglycidyl ether of Bisphenal A. It has lower viscosity, lower reactivity with amines and anhydrides. It is used in high solid solvent free coatings, potting, laminates, electrical and electronics. 收起 | |
| Bisphenol A Epoxy Resin SM828 | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Bisphenol A Epoxy Resin SM828 is an unmodified liquid diglycidyl ether of Bisphenol A. It provides excellent mechanical strength and chemical resistance in a cured state. It has a very low level of ionic impurities and can be used in adhesives, grouts, CE...展开 Bisphenol A Epoxy Resin SM828 is an unmodified liquid diglycidyl ether of Bisphenol A. It provides excellent mechanical strength and chemical resistance in a cured state. It has a very low level of ionic impurities and can be used in adhesives, grouts, CED paints, potting, solvent-free coatings, electrical and electronics. 收起 | |
| Bisphenol A Epoxy Resin SM828S | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Bisphenol A Epoxy Resin SM828S is an unmodified liquid epoxy resin reaction product of Bisphenol A and epichlorohydrin. It shows much better crystallization resistance compared for standard liquid resin. When it is cured with the appropriate hardener, it ...展开 Bisphenol A Epoxy Resin SM828S is an unmodified liquid epoxy resin reaction product of Bisphenol A and epichlorohydrin. It shows much better crystallization resistance compared for standard liquid resin. When it is cured with the appropriate hardener, it gives excellent mechanical, chemical and adhesion properties. It is used in high solid solvent-free coatings, adhesives, composites, civil engineering and construction. 收起 | |
| Bisphenol F Epoxy Resin (BPF) | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Bisphenol F Epoxy Resin (BPF) is an epoxy resin used in the paints and coatings industry. | |
| Bisphenol F Epoxy Resin SMF-170 | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Bisphenol F Epoxy Resin SMF-170 is a general-purpose unmodified low viscosity diglycidyl ether of Bisphenol F. In addition to offering advantage in terms of processing due to viscosity, it provides better chemical resistance compared to Bisphenol-A based ...展开 Bisphenol F Epoxy Resin SMF-170 is a general-purpose unmodified low viscosity diglycidyl ether of Bisphenol F. In addition to offering advantage in terms of processing due to viscosity, it provides better chemical resistance compared to Bisphenol-A based liquid resins. It is used in adhesives for electronic applications, chemical resistance coatings, industrial floors and laminates. 收起 | |
| Bisphenol F Epoxy Resin SMF-175S | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Bisphenol F Epoxy Resin SMF-175S is an epoxy resin used for coatings, building and electrical insulating materials. | |
| Bisphenol F Epoxy Resin SMF-2001 | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Bisphenol F Epoxy Resin SMF-2001 is an epoxy resin used for material, building and electrical insulating materials. | |
| Bisphenol F Epoxy Resin SMF-2004 | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Bisphenol F Epoxy Resin SMF-2004 is an epoxy resin with a high softening point and good flexibility. It is used in powder coatings. | |
| Bisphenol F Epoxy Resin SMF-2005 | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Bisphenol F Epoxy Resin SMF-2005 is an epoxy resin with a high softening point and good flexibility. It is used in powder coatings. | |
| BPA Epoxy Resin SM-601RX75 | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | BPA Epoxy Resin SM-601RX75 is a Xylene solvent based epoxy resin used in the coatings industry. | |
| BPA Epoxy Resin SM-601X75 | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | BPA Epoxy Resin SM-601X75 is a Xylene solvent based epoxy resin used in the coatings industry. | |
| BPA Epoxy Resin SM-634RX80 | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | BPA Epoxy Resin SM-634RX80 is a Xylene solvent based epoxy resin used in the coatings industry. | |
| BPA Epoxy Resin SM-634RX90 | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | BPA Epoxy Resin SM-634RX90 is a Xylene solvent based epoxy resin used in the coatings industry. | |
| BPA Epoxy Resin SM-828X90 | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | BPA Epoxy Resin SM-828X90 is a Xylene solvent based epoxy resin used in the coatings industry. | |
| BRB Siloen® DA 290 | BRB International BV | BRB Siloen® DA 290 is solvent solution of a fluorosilicone fluid. It can be used as a silicone defoamer for solvent-free, solvent-borne, printing inks and ambient curing plastic system (epoxy and PU). | |
| BRB Siloen® LA 271 | BRB International BV | BRB Siloen® LA 271 is a glycol-modified silicone fluid. It is an additive for ink and coating applications, especially suitable for solvent and radiation curing with good substrate wetting. | |
| BRB Siloen® PDA 222 | BRB International BV | BRB Siloen® PDA 222 is an alkyl modified siloxane. It can be used as a dispersant processing aid for pigments, fillers and additives used in paints or plastic applications. | |
| BRB Siloen® SMA 280 | BRB International BV | BRB Siloen® SMA 280 is a 50% Polyether-modified siloxane solution in Di-propylene Glycol Methylether. It is a silicone additive for waterborne and solvent coatings with excellent slip and smoothness. | |
| BRB Siloen® SMA 283 | BRB International BV | BRB Siloen® SMA 283 is a Polyether-modified siloxane. It can be used as a silicone additive for waterborne and solvent coatings with excellent slip, smoothness and anti-crater effect. | |
| BRB Siloen® SMA 284 | BRB International BV | BRB Siloen® SMA 284 is an 80% active dispersion of a high molecular weight silicone gum. It can be used as a silicone additive for waterborne and solvent coatings providing excellent slip, mar resistance, gloss and anti-blocking effect. | |
| BRB Siloen® SMA 285 | BRB International BV | BRB Siloen® SMA 285 is a 30% active emulsion of a high molecular weight silicone urethane resin. It can be used as a silicone additive for water-based coatings. | |
| BRB Siloen® SMA 286 | BRB International BV | BRB Siloen® SMA 286 is a 100% active cross-linkable silicone acrylate pre-polymer. It is a silicone additive, especially designed for radiation cure coatings such as overprint varnishes for packaging, inks, coating with release properties and wood coating...展开 BRB Siloen® SMA 286 is a 100% active cross-linkable silicone acrylate pre-polymer. It is a silicone additive, especially designed for radiation cure coatings such as overprint varnishes for packaging, inks, coating with release properties and wood coatings. It can also act as an intermediate for polymers modification. 收起 | |
| BRB Siloen® SR 313 | BRB International BV | BRB Siloen® SR 313 is a medium hard methyl phenyl silicone resin for heat resistant paints. It can be used as a binder for heat resistant and anti-corrosive paints. | |
| BRB Siloen® SR 379 | BRB International BV | BRB Siloen® SR 379 is a hard methyl silicone resin 50% active in organic solvents. It can be used as a binder for heat resistant and anti-corrosive paints. | |
| BRB Siloen® SR 379N | BRB International BV | BRB Siloen® SR 379N is a medium hard methyl silicone resin; when dried at room temperature, it is a bit softer than BRB Siloen® SR 379 and has some more tacky residue. After baking, hardness is practically equivalent. It can be used as a binder for heat r...展开 BRB Siloen® SR 379N is a medium hard methyl silicone resin; when dried at room temperature, it is a bit softer than BRB Siloen® SR 379 and has some more tacky residue. After baking, hardness is practically equivalent. It can be used as a binder for heat resistant and anti-corrosive paints. 收起 | |
| BRB Siloen® SR 383 | BRB International BV | BRB Siloen® SR 383 is a medium hard methyl phenyl silicone resin for heat resistant paints. It can be used as a binder for heat resistant and anti-corrosive paints. | |
| BRB Siloen® SR 385 FD | BRB International BV | BRB Siloen® SR 385 FD is a medium hardness Methyl-Phenyl resin supplied at 50 % solid in Xilene, designed to produce non-stick coating materials in contact with foodstuff. It can be used in non-sticking bakery pans for bread, rusks, biscuits, cakes, etc.,...展开 BRB Siloen® SR 385 FD is a medium hardness Methyl-Phenyl resin supplied at 50 % solid in Xilene, designed to produce non-stick coating materials in contact with foodstuff. It can be used in non-sticking bakery pans for bread, rusks, biscuits, cakes, etc., as well as non-stick coatings for toaster, grills, BBQs, etc. 收起 | |
| BRB Siloen® SR 833 | BRB International BV | BRB Siloen® SR 833 is a solventless, solvent thinnable alkoxy methyl silicone oligomer. It is suitable as ambient moisture cure binder for the manufacture of heat resistant coatings. In combination with suitable catalyst, pigments and fillers, can be used...展开 BRB Siloen® SR 833 is a solventless, solvent thinnable alkoxy methyl silicone oligomer. It is suitable as ambient moisture cure binder for the manufacture of heat resistant coatings. In combination with suitable catalyst, pigments and fillers, can be used for ambient curing heat resistant paint. (Automotive parts, industrial coatings, ovens, stoves and barbecues). 收起 | |
| BRB Siloen® TA 394 | BRB International BV | BRB Siloen® TA 394 is a solvent based high molecular weight polydimethylsiloxane formulation, designed as a hammertone finish additive. It provides a hammertone finish effect to paints and coatings. | |
| BRB Siloen® WA 261 | BRB International BV | BRB Siloen® WA 261 is a modified trisiloxane that provides outstanding surface tension reduction and super spreading properties. It is a surface wetting additive for coatings and inks. | |
| BRB Siloen® WA 264 | BRB International BV | BRB Siloen® WA 264 is a polyether-modified siloxane. It is a silicone surfactant for aqueous coatings with excellent wetting and levelling properties. | |
| BRB Siloen® WA 265 | BRB International BV | BRB Siloen® WA 265 is an organo-modified trisiloxane. It provides outstanding surface tension reduction and super spreading properties to any aqueous solution. It is a silicone wetting agent for waterborne and radiation curable coating, inks and overprint...展开 BRB Siloen® WA 265 is an organo-modified trisiloxane. It provides outstanding surface tension reduction and super spreading properties to any aqueous solution. It is a silicone wetting agent for waterborne and radiation curable coating, inks and overprint varnishes. 收起 | |
| Brominated Epoxy Resin EX-23-80 | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Brominated Epoxy Resin EX-23-80 is an epoxy resin treated for flame retardant coatings. | |
| Brominated Epoxy Resin EX-23-80A | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Brominated Epoxy Resin EX-23-80A is an epoxy resin treated for flame retardant coatings. | |
| Brominated Epoxy Resin SMB-360 | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Brominated Epoxy Resin SMB-360 is an epoxy resin treated for flame retardant coatings. | |
| Brominated Epoxy Resin SMB-400 | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Brominated Epoxy Resin SMB-400 is an epoxy resin treated for flame retardant coatings. | |
| Brominated Epoxy Resin SMB-400EK60 | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Brominated Epoxy Resin SMB-400EK60 is an epoxy resin treated for flame retardant coatings. | |
| Brominated Epoxy Resin SMB-400T60 | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Brominated Epoxy Resin SMB-400T60 is an epoxy resin treated for flame retardant coatings. | |
| Brominated Epoxy Resin SMB-405 | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Brominated Epoxy Resin SMB-405 is an epoxy resin treated for flame retardant coatings. | |
| Brominated Epoxy Resin SMB-450A-80 | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Brominated Epoxy Resin SMB-450A-80 is an epoxy resin treated for flame retardant coatings. | |
| Brominated Epoxy Resin SMB-500A-80 | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Brominated Epoxy Resin SMB-500A-80 is an epoxy resin treated for flame retardant coatings. | |
| Brominated Epoxy Resin SMB-500EK-80 | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Brominated Epoxy Resin SMB-500EK-80 is an epoxy resin treated for flame retardant coatings. | |
| Brominated Epoxy Resin SMB-530EK-80 | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Brominated Epoxy Resin SMB-530EK-80 is an epoxy resin treated for flame retardant coatings. | |
| CAC (2-Ethoxyethyl Acetate) | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | CAC是一种无色液体，能与一般有机溶剂混溶，溶于水。有令人愉快的酯类香。用作溶剂，与其他化合物配合用作皮革粘合剂、油漆剥离剂、金属热镀抗腐蚀涂料等。 | |
| CCR 110 | CINKARNA | CCR is an ultrafine, nanoparticle version of a rutile titanium dioxide pigment. This product has been surface modified. It can be used in transparent UV coatings for various substrates. | |
| CCR 130 | CINKARNA | CCR 130 is an ultrafine, nanoparticle version of a rutile titanium dioxide pigment. This product has been surface modified. It can be used in transparent UV coatings for various substrates. | |
| CCR 150 | CINKARNA | CCR 150 is an ultrafine, nanoparticle version of a rutile titanium dioxide pigment. This product has been surface-modified. It can be used in transparent UV coatings for various substrates. | |
| CF1-135 | NuSil Silicone Technology 1 | CF1-135 is high technology translucent silicone primer that is specifically formulated for use with platinum cured systems where conventional primers are insufficient. This product can help improve the adhesion of addition-cured systems to different subst...展开 CF1-135 is high technology translucent silicone primer that is specifically formulated for use with platinum cured systems where conventional primers are insufficient. This product can help improve the adhesion of addition-cured systems to different substrates such as metals, ceramics, glass, some plastics and other silicone material. It is a one-component primer that is supplied in VM&P Napththa and it requires no mixing. 收起 | |
| CF1-141 | NuSil Silicone Technology 1 | CF1-141 is a high technology silicone primer that is specially formulated to be used with platinum-cured systems and is colored red to provide an easy visual determination of surface coverage. It is a lower Volatile Organic Component (VOC) product and air...展开 CF1-141 is a high technology silicone primer that is specially formulated to be used with platinum-cured systems and is colored red to provide an easy visual determination of surface coverage. It is a lower Volatile Organic Component (VOC) product and air dries. This primer improves adhesion of addition-cured systems to various substrates such as glass, metals, plastics, ceramics and other silicone materials. 收起 | |
| CF1-3510 | NuSil Silicone Technology 1 | CF1-3510 is a fluorosilicone potting and encapsulating elastomer that cures with the addition of heat. It is best used for applications that require solvent resistance and for molding parts such as stoppers, o-rings, and seals. This product can also be us...展开 CF1-3510 is a fluorosilicone potting and encapsulating elastomer that cures with the addition of heat. It is best used for applications that require solvent resistance and for molding parts such as stoppers, o-rings, and seals. This product can also be used as an encapsulating, potting and sealing material and it is best used in applications requiring an operating temperature range of -65°C to 240°C (-85°F to 465°F). 收起 | |
| CF1-3710-2 | NuSil Silicone Technology 1 | CF1-3710-2 is a fluorosilicone foam that has a 1:1 ratio with a white Part A and gray Part B for easy identification and mixing. This product cures very quickly at room temperature to an elastomeric foam. It can be used as a solvent resistant seal or in s...展开 CF1-3710-2 is a fluorosilicone foam that has a 1:1 ratio with a white Part A and gray Part B for easy identification and mixing. This product cures very quickly at room temperature to an elastomeric foam. It can be used as a solvent resistant seal or in shock and vibration dampening situations that require a flexible, light weight foam with exceptional radiation resistance and thermal insulation. This foam is especially useful where stability at higher and lower temperatures is required. 收起 | |
| CF1-3800 | NuSil Silicone Technology 1 | CF1-3800 is a thermally conductive, fluorosilicone elastomer that cures at room temperature, or rapidly with the addition of heat. It can be used to adhere covers on housings, modules, and other configurations that require a non-flowable material. This pr...展开 CF1-3800 is a thermally conductive, fluorosilicone elastomer that cures at room temperature, or rapidly with the addition of heat. It can be used to adhere covers on housings, modules, and other configurations that require a non-flowable material. This product can also be utilized as an adhesive, sealant or molding material when solvent resistance is needed. It can provide the transfer of heat between electrical components and heat sinks, and can operate at a temperature range of -65°C to 225°C (-85°F to 437°F). 收起 | |
| CF19-2186 | NuSil Silicone Technology 1 | CF19-2186 is a general purpose silicone elastomer that has a medium cure rate and is provided in mix and dispense applicators. This product can provide protection for assemblies and electronic components against, vibration, shock, ozone, moisture, dust an...展开 CF19-2186 is a general purpose silicone elastomer that has a medium cure rate and is provided in mix and dispense applicators. This product can provide protection for assemblies and electronic components against, vibration, shock, ozone, moisture, dust and other contaminants. It can also be utilized as an encapsulating or potting material, and can replicate surfaces and devices. 收起 | |
| CF19-2615 | NuSil Silicone Technology 1 | CF19-2615 is a two-part, silicone elastomer that is optically clear and solvent free. It cures at room temperature or rapidly with the addition of heat. This product can be use for photonics applications such as photo detectors, HBLEDs, lasers, flat panel...展开 CF19-2615 is a two-part, silicone elastomer that is optically clear and solvent free. It cures at room temperature or rapidly with the addition of heat. This product can be use for photonics applications such as photo detectors, HBLEDs, lasers, flat panel displays and discrete optics that require a 1.41 refractive index. It can also provide protection to electronic components and assemblies against vibration, shock, moisture, dust and other environmental hazards. 收起 | |
| CF2-135 | NuSil Silicone Technology 1 | CF2-135 is a silicone primer that is specifically designed to be used with platinum-cured systems where conventional primers will not be sufficient. This product will help to improve the adhesion of addition-cured systems to various substrates such as woo...展开 CF2-135 is a silicone primer that is specifically designed to be used with platinum-cured systems where conventional primers will not be sufficient. This product will help to improve the adhesion of addition-cured systems to various substrates such as wood, metals, ceramics, plastics, and other silicone materials. For the best bonding results, be sure that the surface being primed is clean and degreased. 收起 | |
| CF2-3521 | NuSil Silicone Technology 1 | CF2-3521 is a translucent fluorosilicone elastomer that cures rapidly with heat from an oven or heating lamp, or at room temperature. It can be utilized in applications that would require a good solvent resistance. This product is especially useful for mo...展开 CF2-3521 is a translucent fluorosilicone elastomer that cures rapidly with heat from an oven or heating lamp, or at room temperature. It can be utilized in applications that would require a good solvent resistance. This product is especially useful for molding parts such as O-rings, stoppers, and seals. 收起 | |
| CF2-3521-2 | NuSil Silicone Technology 1 | CF2-3521-2 is a two part, black, 50 mole % fluorosilicone elastomer that cures at room temperature, or rapidly with heat from a heating lamp or oven. This product can be especially useful for molding parts such as stoppers, seals, and O-rings. It can also...展开 CF2-3521-2 is a two part, black, 50 mole % fluorosilicone elastomer that cures at room temperature, or rapidly with heat from a heating lamp or oven. This product can be especially useful for molding parts such as stoppers, seals, and O-rings. It can also be used in applications that would require a solvent resistance. 收起 | |
| CF3-3521 | NuSil Silicone Technology 1 | CF3-3521 is a fluorosilicone elastomer that can be used with with liquid injection molding equipment. It is an exceptional product to use for molding high quality parts such as gaskets, seals and o-rings. It is also ideal for applications that require a m...展开 CF3-3521 is a fluorosilicone elastomer that can be used with with liquid injection molding equipment. It is an exceptional product to use for molding high quality parts such as gaskets, seals and o-rings. It is also ideal for applications that require a medium hardness silicone and solvent resistance. This product is best utilized in applications that require an operating temperature range of -65 to 240°C (-85 to 465°F). 收起 |
