| 1-Vinylimidazole, VIM | BASF SE, Intermediates Division 巴斯夫中间体 | UV涂料（油墨、胶粘剂、一般工业涂料）的活性稀释剂。水溶性特殊聚合物（油田&化妆品）单体。可应用于UV涂料、UV油墨和UV胶粘剂。高活性，用于自由基聚合，可增进对塑胶的润湿和附着力 | |
| 1,2-Dimethylimidazole, Lupragen DMI | BASF SE, Intermediates Division 巴斯夫中间体 | 环氧和氨基甲酸酯反应的选择性催化剂。1,2-二甲基咪唑可用于双组分环氧体系，可用于改性环氧树脂，可制备聚氨酯 | |
| 1,3-Diaminopropane | BASF SE, Intermediates Division 巴斯夫中间体 | 环氧树脂交联剂，聚酰胺的基础原料。1,3-二氨基丙烷通常可用于环氧涂料、环氧复合材料和环氧胶粘剂 | |
| 1,4-Butanediol, BDO | BASF SE, Intermediates Division 巴斯夫中间体 | 不饱和聚酯、饱和聚酯和聚氨酯的基础原料。它适合柔韧的家具涂料和修补腻子，可用于柔韧的溶剂型油漆、增塑剂和聚氨酯软质链段 | |
| 1,4-Cyclohexane dimethanol divinyl ether, CHDM di | BASF SE, Intermediates Division 巴斯夫中间体 | 1,4-环己烷化二甲醇化二乙烯基醚是一种活性稀释剂，适合不饱和聚酯、UV涂料、UV油墨、UV胶粘剂、离型涂料和人造大理石。1,4-环己烷化二甲醇化二乙烯基醚，适用于UV涂料（木器、印刷油墨、包装）和UV胶粘剂 | |
| 1,4-Cyclohexane dimethanol mono vinyl ether, CHDM Mono | BASF SE, Intermediates Division 巴斯夫中间体 | 大分子单体和乙烯基共聚物单体，UV涂料活性稀释剂的基础原料。UV涂料和胶粘剂的活性稀释剂。可用于水性和溶剂型羟基官能团乙烯基聚合物，可与聚异氰酸酯和三聚氰胺树脂交联 | |
| 1,5-Pentanediol, PDO | BASF SE, Intermediates Division 巴斯夫中间体 | 1,5-戊二醇是饱和聚酯、不饱和聚酯和聚氨酯的基础原料，喷墨油墨配方的溶剂。它可用于溶剂型涂料（烤漆、双组分漆、易拉罐和卷钢涂料）用聚酯，聚酯增塑剂，并作为聚氨酯的软质链段 | |
| 1,6-Hexanediol HDO® | BASF SE, Intermediates Division 巴斯夫中间体 | 饱和聚酯和1,6-己二醇的聚氨酯丙烯酸酯可作为活性稀释剂应用于UV涂料。1,6-己二醇可制备聚酯用于溶剂型油漆、汽车烤漆、易拉罐和卷材涂料以及一般工业应用。它很适用于双组分塑胶涂料和修补涂料。它适用于聚酯增塑剂和聚氨酯软质链段 | |
| 1,8-Diazabicyclo-5,4,0-undecene-7 Lupragen® N 700 | BASF SE, Intermediates Division 巴斯夫中间体 | 氨基甲酸酯反应催化剂， 1,8-二偶氮杂双螺环[5.4.0]十一-7-烯可用于制备聚氨酯和作为催化剂应用于双组分OEM汽车漆、修补漆、塑胶漆和一般工业漆。1,8-二偶氮杂双螺环[5.4.0]十一-7-烯高度有效。作为一种液体，它易处理并与树脂具有高相容性 | |
| 2-(2-Aminoethoxy) ethanol | BASF SE, Intermediates Division 巴斯夫中间体 | 环氧树脂改性的基础原料。2-（2-氨基乙氧基）乙醇改性环氧树脂适用于阳离子电沉积涂料 | |
| 2-Ethyl-4-Methylimidazole | BASF SE, Intermediates Division 巴斯夫中间体 | 环氧和氨基甲酸酯反应的选择性催化剂。2-乙基-4-甲基咪唑可用于双组分环氧体系，可用于改性环氧树脂和制备聚氨酯 | |
| 2-Ethylhexanoic Acid, 2-EHA | BASF SE, Intermediates Division 巴斯夫中间体 | 醇酸树脂和制备有机金属盐的基础原料。经2-乙基己酸改性的醇酸树脂适用于烤漆和双组分油漆（底漆和面漆）。2-乙基己酸的金属盐可用于催干氧化干燥漆和印刷油墨 | |
| 2-Ethylhexylvinylether, EHVE | BASF SE, Intermediates Division 巴斯夫中间体 | 乙烯基氯(Laroflex®)或TFCE 1,1,2-三氟-2-氯乙共聚物的单体。与2-乙基己基乙烯基醚的共聚物可用于溶剂型防腐涂料。乙烯基醚可与缺电子单体，例如乙烯基氯、马来酸酐、TFCE，通过电荷转移络合聚合形成交替共聚物，可获得更佳的溶解性和柔韧性 | |
| 2-Ethylimidazole | BASF SE, Intermediates Division 巴斯夫中间体 | 环氧和氨基甲酸酯反应的选择性催化剂。2-乙基咪唑可用于双组分环氧体系，可用于改性环氧树脂和制备聚氨酯 | |
| 2-Mercaptoethanol | BASF SE, Intermediates Division 巴斯夫中间体 | 该产品的应用领域：锡类稳定剂、聚合过程的链转移剂和油田防腐体系。巯基乙醇可用于水性涂料的丙烯酸树脂生产 | |
| 2-Methylimidazole | BASF SE, Intermediates Division 巴斯夫中间体 | 环氧和氨基甲酸酯反应的选择性催化剂。2-甲基咪唑可用于双组分环氧体系，可用于改性环氧树脂和制备聚氨酯 | |
| 2,4,7,9-Tetramethyl-decyne-5-diol-4,7, TMDD | BASF SE, Intermediates Division 巴斯夫中间体 | 水性涂料和油墨的防沫剂和润湿剂。TMDD适用于所有水性涂料（ED涂料、水性烤漆、水性家用和墙面漆)和油墨 | |
| 3-(Cyclohexylamino) propylamine | BASF SE, Intermediates Division 巴斯夫中间体 | 环氧树脂交联剂。3-氨丙基环己胺适用于双组分环氧涂料、环氧基塑料零件。3-氨丙基环己胺与共用树脂非常相容，并可提高成膜时的耐潮湿性能 | |
| 3-(Dimethylamino) propylamine | BASF SE, Intermediates Division 巴斯夫中间体 | 环氧树脂改性的基础原料。3-(二甲氨基)丙胺改性环氧树脂适用于阳离子电沉积涂料 | |
| 3,3'-Dimethyl-4,4'-diamino-dicyclohexyl-methan | BASF SE, Intermediates Division 巴斯夫中间体 | 环氧树脂交联剂，聚酰胺和聚氨酯的基础原料。 2,2'-二甲基-4,4'-亚甲基双（环己胺）适合双组分环氧涂料、环氧基胶粘剂和环氧复合材料。2,2'-二甲基-4,4'-亚甲基双（环己胺）的憎水结构可增进抗水解性能，增加环氧涂料的反应活性和相容性 | |
| 4-Hydroxybutyl vinyl ether (HBVE) | BASF SE, Intermediates Division 巴斯夫中间体 | 大分子单体、乙烯基共聚物单体和UV涂料活性稀释剂的基础原料。乙氧基HBVE可作为单体用于混凝土添加剂。用于水性和溶剂型羟基官能团乙烯基聚合物，可与聚异氰酸酯和三聚氰胺树脂交联 | |
| 4,4'-Diaminodicyclo-hexylmethane | BASF SE, Intermediates Division 巴斯夫中间体 | 环氧树脂交联剂，聚酰胺的基础原料。 二氨基二环己基甲烷可用于双组分环氧涂料和环氧胶粘剂。二氨基二环己基甲烷可优化硬度和柔韧性之间的平衡 | |
| 4,4'-Methylenedianiline, MDA | BASF SE, Intermediates Division 巴斯夫中间体 | 聚酰亚胺、聚酰胺酰亚胺，聚酯酰亚胺，环氧树脂特种交联剂。聚酰亚胺、聚酰胺酰亚胺和聚酯酰亚胺树脂基于4,4'-亚甲基双苯胺，可用于电绝缘涂料，4,4'-亚甲基双苯胺也可作为环氧交联剂用于特殊环氧粉末涂料中 | |
| 4,7,10-Trioxatridecan- 1,13-diamine | BASF SE, Intermediates Division 巴斯夫中间体 | 环氧树脂交联剂，聚氨酯和聚脲的基础原料。 4,7,10-三恶十三烷-1,13-二胺适用于双组分环氧涂料，可结合聚异氰酸酯加合物用于聚脲涂料。它也可增加涂料的柔韧性 | |
| 4,9-Dioxadodecan- 1,12-diamine | BASF SE, Intermediates Division 巴斯夫中间体 | 环氧树脂交联剂，聚氨酯和聚脲的基础原料。4,9-二恶十二烷-1,12-二胺适用于双组分环氧涂料，可结合聚异氰酸酯加合物用于聚脲涂料。它也可增加涂料的柔韧性 | |
| Aromatic Urethane Hexaacrylate SM6329 | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | SM6329是一种芳香族聚氨酯六丙烯酸酯。它提供了很高的反应性和硬度，并提供了耐磨性和耐化学性。SM6329广泛用于UV固化涂料、粘合剂和油墨。 | |
| Baxxodur™ EC 201 | BASF SE, Intermediates Division 巴斯夫中间体 | BAXXODUR™ EC 201是一种脂环族胺基固化剂，具有低粘度和中等反应活性。应用为：结构胶、地板材料、薄胶泥、涂料等，用于建筑、复合层合材料、铸造和封装、重型保护涂料 | |
| Baxxodur™ EC 301 | BASF SE, Intermediates Division 巴斯夫中间体 | BAXXODUR™ 301是一种聚醚胺基固化剂，具有低粘度和长开罐使用时间。应用为：结构胶、建筑物、复合层合材料、铸造和封装、装饰和保护涂料 | |
| Baxxodur™ EC 302 | BASF SE, Intermediates Division 巴斯夫中间体 | BAXXODUR™ 302是一种聚醚胺基固化剂，具有低粘度和长开罐使用时间。应用为：复合材料、结构胶、环氧增韧剂 | |
| Baxxodur™ EC 110 | BASF SE, Intermediates Division 巴斯夫中间体 | BAXXODUR™ EC 110是一种脂肪族胺基快速固化剂，具有低粘度。应用为：建筑用环氧薄胶泥、船舶和修补用环氧涂料、铸造和封装、复合层合材料、以及聚酰胺中间体 | |
| Baxxodur™ EC 130 | BASF SE, Intermediates Division 巴斯夫中间体 | BAXXODUR™ EC 130是一种聚醚胺基固化剂，具有低粘度和高反应活性。应用为：结构胶、复合层合材料 | |
| Baxxodur™ EC 252 | BASF SE, Intermediates Division 巴斯夫中间体 | BAXXODUR™ EC 252是一种脂环族胺基固化剂，具有非常低的粘度和中等反应活性。应用为：结构胶、重型环氧涂料、复合层合材料、铸造和封装、环氧预浸料坯 | |
| Benzidine Orange R | Emperor Pigment Co., Ltd. | Benzidine Orange R is a yellowish colored pigment that is used in solvent inks, aqueous inks, and aqueous coatings. It has a density value of 1.4 and a pH value of 7. This product has a color index number of Pigment Orange 16, a CAS number of 6505-28-8, a...展开 Benzidine Orange R is a yellowish colored pigment that is used in solvent inks, aqueous inks, and aqueous coatings. It has a density value of 1.4 and a pH value of 7. This product has a color index number of Pigment Orange 16, a CAS number of 6505-28-8, and an EU number of 229-388-1. 收起 | |
| Benzidine Yellow 121H | Emperor Pigment Co., Ltd. | Benzidine Yellow 121H is a pigment that is bright yellow in color. It has a color index number of Pigment Yellow 12, a CAS number of 6358-85-6, and an EU number of 228-787-8. This product has a density value of 1.5, a pH value of 6.0 to 7.0, and is used i...展开 Benzidine Yellow 121H is a pigment that is bright yellow in color. It has a color index number of Pigment Yellow 12, a CAS number of 6358-85-6, and an EU number of 228-787-8. This product has a density value of 1.5, a pH value of 6.0 to 7.0, and is used in PA inks, NC inks, PP inks, and Toluene based inks. 收起 | |
| Benzidine Yellow DHG | Emperor Pigment Co., Ltd. | Benzidine Yellow DHG is a bright yellow colored pigment that is used in offset inks and textile printing. It has a density value of 1.5 and a pH value of 6.0 to 7.0. This product has a color index number of Pigment Yellow 12, a CAS number of 6358-85-6, an...展开 Benzidine Yellow DHG is a bright yellow colored pigment that is used in offset inks and textile printing. It has a density value of 1.5 and a pH value of 6.0 to 7.0. This product has a color index number of Pigment Yellow 12, a CAS number of 6358-85-6, and an EU number of 228-787-8. 收起 | |
| Benzidine Yellow G | Emperor Pigment Co., Ltd. | Benzidine Yellow G is a pigment that is reddish yellow and transparent in color. It has a color index number of Pigment Yellow 12, a CAS number of 6358-85-6, and an EU number of 228-787-8. This product has a density value of 1.5, a pH value of 6.0 to 7.0,...展开 Benzidine Yellow G is a pigment that is reddish yellow and transparent in color. It has a color index number of Pigment Yellow 12, a CAS number of 6358-85-6, and an EU number of 228-787-8. This product has a density value of 1.5, a pH value of 6.0 to 7.0, and is used in offset inks, waterbased inks, and textile printing. 收起 | |
| Benzidine Yellow G-A | Emperor Pigment Co., Ltd. | Benzidine Yellow G-A is a pigment that is reddish yellow in color. It has a color index number of Pigment Yellow 12, a CAS number of 6358-85-6, and an EU number of 228-787-8. This product has a density value of 1.5, a pH value of 6.0 to 7.0, and is used i...展开 Benzidine Yellow G-A is a pigment that is reddish yellow in color. It has a color index number of Pigment Yellow 12, a CAS number of 6358-85-6, and an EU number of 228-787-8. This product has a density value of 1.5, a pH value of 6.0 to 7.0, and is used in offset inks, waterbased inks, and textile printing. 收起 | |
| Benzidine Yellow G-B | Emperor Pigment Co., Ltd. | Benzidine Yellow G-B is a greenish yellow and semitransparent colored pigment that is used in offset inks, waterbased inks, and textile printing. It has a color index number of Pigment Yellow 12, a CAS number of 6358-85-6, and an EU number of 228-787-8. T...展开 Benzidine Yellow G-B is a greenish yellow and semitransparent colored pigment that is used in offset inks, waterbased inks, and textile printing. It has a color index number of Pigment Yellow 12, a CAS number of 6358-85-6, and an EU number of 228-787-8. This product has a density value of 1.5 and a pH value of 6.0 to 7.0. 收起 | |
| Benzimidazolone Orange | Emperor Pigment Co., Ltd. | Benzimidazolone Orange is a pigment that is orange in color. It has a color index number of Pigment Orange 64 and a CAS number of 72102-84-2. This product has a heat stability value of 250 degrees Celsius, an oil absorption value of 40 to 60 grams per 100...展开 Benzimidazolone Orange is a pigment that is orange in color. It has a color index number of Pigment Orange 64 and a CAS number of 72102-84-2. This product has a heat stability value of 250 degrees Celsius, an oil absorption value of 40 to 60 grams per 100 grams, and is used in paints and printing inks. 收起 | |
| Benzimidazolone Orange HL | Emperor Pigment Co., Ltd. | Benzimidazolone Orange HL is an orange colored pigment that is used in offset inks, solvent inks, aqueous inks, and paints. It has a color index number of Pigment Orange 36, a CAS number of 12236-62-3, and an EU number of 235-462-4. This product has a den...展开 Benzimidazolone Orange HL is an orange colored pigment that is used in offset inks, solvent inks, aqueous inks, and paints. It has a color index number of Pigment Orange 36, a CAS number of 12236-62-3, and an EU number of 235-462-4. This product has a density value of 1.4 and a pH value of 6.5. 收起 | |
| Benzylamine | BASF SE, Intermediates Division 巴斯夫中间体 | 结晶脲的基础原料。基于苄胺的结晶脲作为流挂控制剂应用于烤漆中 | |
| Bisphenol A Epoxy Diacrylate SM6104 | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | SM6104是标准双酚A环氧丙烯酸酯。它带来低粘度与浅色，并且提供高光泽，硬度和优良的耐化学性。本产品广泛应用于紫外线涂料、油墨和粘合剂等。 | |
| Bisphenol A Epoxy Resin SM601 | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Bisphenol A Epoxy Resin SM601 is a low molecular weight, transparent solid without obvious mechanical impurity. It can be used in anti-corrosive coatings, electrophoretic paint, powder coatings, baking paint, can paint and coil coatings. | |
| Bisphenol A Epoxy Resin SM601R | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Bisphenol A Epoxy Resin SM601R is a low molecular weight, transparent solid without obvious mechanical impurity. It can be used in anti-corrosive coatings, electrophoretic paint, powder coatings, baking paint, can paint and coil coatings. | |
| Bisphenol A Epoxy Resin SM602R | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Bisphenol A Epoxy Resin SM602R is a low molecular weight, transparent solid without obvious mechanical impurity. It can be used in anti-corrosive coatings, electrophoretic paint, powder coatings, baking paint, can paint and coil coatings. | |
| Bisphenol A Epoxy Resin SM603R | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Bisphenol A Epoxy Resin SM603R is a low molecular weight, transparent solid without obvious mechanical impurity. It can be used in anti-corrosive coatings, electrophoretic paint, powder coatings, baking paint, can paint and coil coatings. | |
| Bisphenol A Epoxy Resin SM603RP | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Bisphenol A Epoxy Resin SM603RP is a medium molecular weight, transparent solid without obvious mechanical impurity. It can be used in anti-corrosive coatings, electrophoretic paint, powder coatings, baking paint, can paint and coil coatings. | |
| Bisphenol A Epoxy Resin SM604R | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Bisphenol A Epoxy Resin SM604R is a medium molecular weight, transparent solid without obvious mechanical impurity. It can be used in anti-corrosive coatings, electrophoretic paint, powder coatings, baking paint, can paint and coil coatings. | |
| Bisphenol A Epoxy Resin SM607 | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Bisphenol A Epoxy Resin SM607 is a medium molecular weight, transparent solid without obvious mechanical impurity. It can be used in anti-corrosive coatings, electrophoretic paint, powder coatings, baking paint, can paint and coil coatings. | |
| Bisphenol A Epoxy Resin SM607R | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Bisphenol A Epoxy Resin SM607R is a high molecular weight, transparent solid without obvious mechanical impurity. It can be used in anti-corrosive coatings, electrophoretic paint, powder coatings, baking paint, can paint and coil coatings. | |
| Bisphenol A Epoxy Resin SM609 | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Bisphenol A Epoxy Resin SM609 is a high molecular weight, transparent solid without obvious mechanical impurity. It can be used in anti-corrosive coatings, electrophoretic paint, powder coatings, baking paint, can paint and coil coatings. | |
| Bisphenol A Epoxy Resin SM6091 | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Bisphenol A Epoxy Resin SM6091 is a high molecular weight, transparent solid without obvious mechanical impurity. It can be used in anti-corrosive coatings, electrophoretic paint, powder coatings, baking paint, can paint and coil coatings. | |
| Bisphenol A Epoxy Resin SM609R | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Bisphenol A Epoxy Resin SM609R is a high molecular weight, transparent solid without obvious mechanical impurity. It can be used in anti-corrosive coatings, electrophoretic paint, powder coatings, baking paint, can paint and coil coatings. | |
| Bisphenol A Epoxy Resin SM6101 | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Bisphenol A Epoxy Resin SM6101 is a transparent liquid without obvious mechanical impurity and a moderate viscosity. It can be used for the coatings industry. | |
| Bisphenol A Epoxy Resin SM618 | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Bisphenol A Epoxy Resin SM618 is a transparent liquid without obvious mechanical impurity and a low viscosity. It has good electric insulation and is used in solvent-free coatings, self-leveling coatings, electronic and electrical equipments, potting comp...展开 Bisphenol A Epoxy Resin SM618 is a transparent liquid without obvious mechanical impurity and a low viscosity. It has good electric insulation and is used in solvent-free coatings, self-leveling coatings, electronic and electrical equipments, potting compounds and laminated material. 收起 | |
| Bisphenol A Epoxy Resin SM634 | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Bisphenol A Epoxy Resin SM634 is an unmodified semi-solid diglycidyl ether of Bisphenol A. It is used in high solid protective coatings, tank linings, adhesives, coal tar based coatings and flooring. | |
| Bisphenol A Epoxy Resin SM634H | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Bisphenol A Epoxy Resin SM634H is a transparent semi-solid without obvious mechanical impurity. It is used in casting material, coatings and reinforced plastic products. | |
| Bisphenol A Epoxy Resin SM638 | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Bisphenol A Epoxy Resin SM638 is an unmodified semi-solid diglycidyl ether of Bisphenol A. It is used in high solid protective coatings, electrical castings and adhesives. | |
| Bisphenol A Epoxy Resin SM815CA | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Bisphenol A Epoxy Resin SM815CA is a transparent liquid without obvious mechanical impurity and a low viscosity. It has good electric insulation and is used in solvent-free coatings, self-leveling coatings, electronic and electrical equipments, potting co...展开 Bisphenol A Epoxy Resin SM815CA is a transparent liquid without obvious mechanical impurity and a low viscosity. It has good electric insulation and is used in solvent-free coatings, self-leveling coatings, electronic and electrical equipments, potting compounds and laminated material. 收起 | |
| Bisphenol A Epoxy Resin SM827 | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Bisphenol A Epoxy Resin SM827 is an unmodified high purity, medium viscosity, general purpose diglycidyl ether of Bisphenal A. It has lower viscosity, lower reactivity with amines and anhydrides. It is used in high solid solvent free coatings, potting, la...展开 Bisphenol A Epoxy Resin SM827 is an unmodified high purity, medium viscosity, general purpose diglycidyl ether of Bisphenal A. It has lower viscosity, lower reactivity with amines and anhydrides. It is used in high solid solvent free coatings, potting, laminates, electrical and electronics. 收起 | |
| Bisphenol A Epoxy Resin SM828 | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Bisphenol A Epoxy Resin SM828 is an unmodified liquid diglycidyl ether of Bisphenol A. It provides excellent mechanical strength and chemical resistance in a cured state. It has a very low level of ionic impurities and can be used in adhesives, grouts, CE...展开 Bisphenol A Epoxy Resin SM828 is an unmodified liquid diglycidyl ether of Bisphenol A. It provides excellent mechanical strength and chemical resistance in a cured state. It has a very low level of ionic impurities and can be used in adhesives, grouts, CED paints, potting, solvent-free coatings, electrical and electronics. 收起 | |
| Bisphenol A Epoxy Resin SM828S | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Bisphenol A Epoxy Resin SM828S is an unmodified liquid epoxy resin reaction product of Bisphenol A and epichlorohydrin. It shows much better crystallization resistance compared for standard liquid resin. When it is cured with the appropriate hardener, it ...展开 Bisphenol A Epoxy Resin SM828S is an unmodified liquid epoxy resin reaction product of Bisphenol A and epichlorohydrin. It shows much better crystallization resistance compared for standard liquid resin. When it is cured with the appropriate hardener, it gives excellent mechanical, chemical and adhesion properties. It is used in high solid solvent-free coatings, adhesives, composites, civil engineering and construction. 收起 | |
| Bisphenol F Epoxy Resin (BPF) | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Bisphenol F Epoxy Resin (BPF) is an epoxy resin used in the paints and coatings industry. | |
| Bisphenol F Epoxy Resin SMF-170 | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Bisphenol F Epoxy Resin SMF-170 is a general-purpose unmodified low viscosity diglycidyl ether of Bisphenol F. In addition to offering advantage in terms of processing due to viscosity, it provides better chemical resistance compared to Bisphenol-A based ...展开 Bisphenol F Epoxy Resin SMF-170 is a general-purpose unmodified low viscosity diglycidyl ether of Bisphenol F. In addition to offering advantage in terms of processing due to viscosity, it provides better chemical resistance compared to Bisphenol-A based liquid resins. It is used in adhesives for electronic applications, chemical resistance coatings, industrial floors and laminates. 收起 | |
| Bisphenol F Epoxy Resin SMF-175S | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Bisphenol F Epoxy Resin SMF-175S is an epoxy resin used for coatings, building and electrical insulating materials. | |
| Bisphenol F Epoxy Resin SMF-2001 | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Bisphenol F Epoxy Resin SMF-2001 is an epoxy resin used for material, building and electrical insulating materials. | |
| Bisphenol F Epoxy Resin SMF-2004 | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Bisphenol F Epoxy Resin SMF-2004 is an epoxy resin with a high softening point and good flexibility. It is used in powder coatings. | |
| Bisphenol F Epoxy Resin SMF-2005 | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Bisphenol F Epoxy Resin SMF-2005 is an epoxy resin with a high softening point and good flexibility. It is used in powder coatings. | |
| BPA Epoxy Resin SM-601RX75 | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | BPA Epoxy Resin SM-601RX75 is a Xylene solvent based epoxy resin used in the coatings industry. | |
| BPA Epoxy Resin SM-601X75 | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | BPA Epoxy Resin SM-601X75 is a Xylene solvent based epoxy resin used in the coatings industry. | |
| BPA Epoxy Resin SM-634RX80 | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | BPA Epoxy Resin SM-634RX80 is a Xylene solvent based epoxy resin used in the coatings industry. | |
| BPA Epoxy Resin SM-634RX90 | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | BPA Epoxy Resin SM-634RX90 is a Xylene solvent based epoxy resin used in the coatings industry. | |
| BPA Epoxy Resin SM-828X90 | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | BPA Epoxy Resin SM-828X90 is a Xylene solvent based epoxy resin used in the coatings industry. | |
| Brominated Epoxy Resin EX-23-80 | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Brominated Epoxy Resin EX-23-80 is an epoxy resin treated for flame retardant coatings. | |
| Brominated Epoxy Resin EX-23-80A | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Brominated Epoxy Resin EX-23-80A is an epoxy resin treated for flame retardant coatings. | |
| Brominated Epoxy Resin SMB-360 | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Brominated Epoxy Resin SMB-360 is an epoxy resin treated for flame retardant coatings. | |
| Brominated Epoxy Resin SMB-400 | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Brominated Epoxy Resin SMB-400 is an epoxy resin treated for flame retardant coatings. | |
| Brominated Epoxy Resin SMB-400EK60 | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Brominated Epoxy Resin SMB-400EK60 is an epoxy resin treated for flame retardant coatings. | |
| Brominated Epoxy Resin SMB-400T60 | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Brominated Epoxy Resin SMB-400T60 is an epoxy resin treated for flame retardant coatings. | |
| Brominated Epoxy Resin SMB-405 | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Brominated Epoxy Resin SMB-405 is an epoxy resin treated for flame retardant coatings. | |
| Brominated Epoxy Resin SMB-450A-80 | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Brominated Epoxy Resin SMB-450A-80 is an epoxy resin treated for flame retardant coatings. | |
| Brominated Epoxy Resin SMB-500A-80 | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Brominated Epoxy Resin SMB-500A-80 is an epoxy resin treated for flame retardant coatings. | |
| Brominated Epoxy Resin SMB-500EK-80 | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Brominated Epoxy Resin SMB-500EK-80 is an epoxy resin treated for flame retardant coatings. | |
| Brominated Epoxy Resin SMB-530EK-80 | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Brominated Epoxy Resin SMB-530EK-80 is an epoxy resin treated for flame retardant coatings. | |
| CAC (2-Ethoxyethyl Acetate) | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | CAC是一种无色液体，能与一般有机溶剂混溶，溶于水。有令人愉快的酯类香。用作溶剂，与其他化合物配合用作皮革粘合剂、油漆剥离剂、金属热镀抗腐蚀涂料等。 | |
| Capromer™ PD1–10 | BASF SE, Intermediates Division 巴斯夫中间体 | CAPROMER™ PD1–10是一种聚已酸内酯基聚酯多醇，适用于聚氨酯涂料。该双官能团产品基于新戊二醇，分子量为1000。它可应用于需要独特性能组合的场合，包括水解稳定性、出色的耐候性、良好的动态特性和杰出的低温柔韧性 | |
| Capromer™ PD1–10 A | BASF SE, Intermediates Division 巴斯夫中间体 | CAPROMER™ PD1–10 A类似于Capromer PD1-10，但进一步提高了水解稳定性 | |
| Capromer™ PD1–20 | BASF SE, Intermediates Division 巴斯夫中间体 | CAPROMER™ PD1–20是一种聚已酸内酯基聚酯多醇，适用于聚氨酯涂料。该双官能团产品基于新戊二醇，分子量为2000。它可应用于需要独特性能组合的场合，包括水解稳定性、出色的耐候性、良好的动态特性和杰出的低温柔韧性 | |
| Capromer™ PD1–20 A | BASF SE, Intermediates Division 巴斯夫中间体 | CAPROMER™ PD1–20 A类似于Capromer PD1-20，但进一步提高了水解稳定性 | |
| Capromer™ PD4-05 (PolyCLO DEG550) | BASF SE, Intermediates Division 巴斯夫中间体 | CAPROMER™ PD4-05是一种聚已酸内酯基聚酯多醇，适用于聚氨酯涂料。该双官能团产品基于二甘醇，分子量为550。它可应用于需要独特性能组合的场合，包括水解稳定性、出色的耐候性、良好的动态特性和杰出的低温柔韧性 | |
| Capromer™ PT1–05 (PolyCLO TMP540) | BASF SE, Intermediates Division 巴斯夫中间体 | CAPROMER™ PT1–05是一种聚已酸内酯基聚酯多醇，适用于聚氨酯涂料和胶粘剂。该三官能团产品基于三羟甲基丙烷，分子量为540。它可应用于需要独特性能组合的场合，包括水解稳定性、出色的耐候性、良好的动态特性和杰出的低温柔韧性 | |
| CCR 110 | CINKARNA | CCR is an ultrafine, nanoparticle version of a rutile titanium dioxide pigment. This product has been surface modified. It can be used in transparent UV coatings for various substrates. | |
| CCR 130 | CINKARNA | CCR 130 is an ultrafine, nanoparticle version of a rutile titanium dioxide pigment. This product has been surface modified. It can be used in transparent UV coatings for various substrates. | |
| CCR 150 | CINKARNA | CCR 150 is an ultrafine, nanoparticle version of a rutile titanium dioxide pigment. This product has been surface-modified. It can be used in transparent UV coatings for various substrates. | |
| CF1-135 | NuSil Silicone Technology 1 | CF1-135 is high technology translucent silicone primer that is specifically formulated for use with platinum cured systems where conventional primers are insufficient. This product can help improve the adhesion of addition-cured systems to different subst...展开 CF1-135 is high technology translucent silicone primer that is specifically formulated for use with platinum cured systems where conventional primers are insufficient. This product can help improve the adhesion of addition-cured systems to different substrates such as metals, ceramics, glass, some plastics and other silicone material. It is a one-component primer that is supplied in VM&P Napththa and it requires no mixing. 收起 | |
| CF1-141 | NuSil Silicone Technology 1 | CF1-141 is a high technology silicone primer that is specially formulated to be used with platinum-cured systems and is colored red to provide an easy visual determination of surface coverage. It is a lower Volatile Organic Component (VOC) product and air...展开 CF1-141 is a high technology silicone primer that is specially formulated to be used with platinum-cured systems and is colored red to provide an easy visual determination of surface coverage. It is a lower Volatile Organic Component (VOC) product and air dries. This primer improves adhesion of addition-cured systems to various substrates such as glass, metals, plastics, ceramics and other silicone materials. 收起 | |
| CF1-3510 | NuSil Silicone Technology 1 | CF1-3510 is a fluorosilicone potting and encapsulating elastomer that cures with the addition of heat. It is best used for applications that require solvent resistance and for molding parts such as stoppers, o-rings, and seals. This product can also be us...展开 CF1-3510 is a fluorosilicone potting and encapsulating elastomer that cures with the addition of heat. It is best used for applications that require solvent resistance and for molding parts such as stoppers, o-rings, and seals. This product can also be used as an encapsulating, potting and sealing material and it is best used in applications requiring an operating temperature range of -65°C to 240°C (-85°F to 465°F). 收起 | |
| CF1-3710-2 | NuSil Silicone Technology 1 | CF1-3710-2 is a fluorosilicone foam that has a 1:1 ratio with a white Part A and gray Part B for easy identification and mixing. This product cures very quickly at room temperature to an elastomeric foam. It can be used as a solvent resistant seal or in s...展开 CF1-3710-2 is a fluorosilicone foam that has a 1:1 ratio with a white Part A and gray Part B for easy identification and mixing. This product cures very quickly at room temperature to an elastomeric foam. It can be used as a solvent resistant seal or in shock and vibration dampening situations that require a flexible, light weight foam with exceptional radiation resistance and thermal insulation. This foam is especially useful where stability at higher and lower temperatures is required. 收起 | |
| CF1-3800 | NuSil Silicone Technology 1 | CF1-3800 is a thermally conductive, fluorosilicone elastomer that cures at room temperature, or rapidly with the addition of heat. It can be used to adhere covers on housings, modules, and other configurations that require a non-flowable material. This pr...展开 CF1-3800 is a thermally conductive, fluorosilicone elastomer that cures at room temperature, or rapidly with the addition of heat. It can be used to adhere covers on housings, modules, and other configurations that require a non-flowable material. This product can also be utilized as an adhesive, sealant or molding material when solvent resistance is needed. It can provide the transfer of heat between electrical components and heat sinks, and can operate at a temperature range of -65°C to 225°C (-85°F to 437°F). 收起 | |
| CF19-2186 | NuSil Silicone Technology 1 | CF19-2186 is a general purpose silicone elastomer that has a medium cure rate and is provided in mix and dispense applicators. This product can provide protection for assemblies and electronic components against, vibration, shock, ozone, moisture, dust an...展开 CF19-2186 is a general purpose silicone elastomer that has a medium cure rate and is provided in mix and dispense applicators. This product can provide protection for assemblies and electronic components against, vibration, shock, ozone, moisture, dust and other contaminants. It can also be utilized as an encapsulating or potting material, and can replicate surfaces and devices. 收起 |
