UL Prospector

成功!

成功保存搜索结果
Request Sample Aromatic Urethane Hexaacrylate SM6329 Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 SM6329是一种芳香族聚氨酯六丙烯酸酯。它提供了很高的反应性和硬度,并提供了耐磨性和耐化学性。SM6329广泛用于UV固化涂料、粘合剂和油墨。
BLUESIL ADD 10086 Elkem Silicones BLUESIL ADD 10086 is a polydimethylsiloxane gum in solvent solution especially developed to obtain hammer effects in combination with thixotropic polyurethane bases. It is also suitable for use with classical, polyurethane bases, thixotropic alkyd paints ...展开 BLUESIL ADD 10086 is a polydimethylsiloxane gum in solvent solution especially developed to obtain hammer effects in combination with thixotropic polyurethane bases. It is also suitable for use with classical, polyurethane bases, thixotropic alkyd paints and silicone binders. 收起
BLUESIL ADD 11013 Elkem Silicones BLUESIL ADD 11013 is a polyether-modified polydimethylsiloxane for use in solventless paints and varnishes, and in water-based paints and inks.
BLUESIL BP 9705 Elkem Silicones BLUESIL BP 9705 is a non ionic, APEO free, polyorganosiloxane aqueous emulsion, to be used as a water repellent additive in various formulations for building materials.
BLUESIL BP 9710 Elkem Silicones BLUESIL BP 9710 is an emulsion with an alkylpolysiloxane oligomer base designed to protect surfaces against moisture. This waterproofing system respects the environment since it is entirely formulated in a water base, it is free of any organic solvent and...展开 BLUESIL BP 9710 is an emulsion with an alkylpolysiloxane oligomer base designed to protect surfaces against moisture. This waterproofing system respects the environment since it is entirely formulated in a water base, it is free of any organic solvent and it does not contain ecotoxic surfactant. After it has dried on the surface, BLUESIL BP 9710 repels water and allows walls to breathe. Experience acquired over more than 40 years shows that silicone water repellents are a good answer to humidity problems in construction materials, particularly when for esthetical reasons the natural aspect of the material should be preserved. BLUESIL BP 9710 has been awarded a test certificate by CSTC (Centre Scientifique et Technique de - ): ref HD-340/133-151 on the 2006.02.20. 收起
BLUESIL BP 9800 Elkem Silicones BLUESIL BP 9800 is an aqueous APE-free polymethylsiloxane resin emulsion. This emulsion is designed for use in facade coatings, to optimise the balance between water repellency and water vapour permeability.
BLUESIL BP 9821 Elkem Silicones BLUESIL BP 9821 is an aqueous APE-free polymethylsiloxane resin emulsion with low VOC content. This emulsion is designed for use in facade coatings, to optimise the balance between water repellency and water vapour permeability.
BLUESIL BP 9878 Elkem Silicones BLUESIL BP 9878 is an aqueous polymethylsiloxane resin emulsion.This emulsion provides two fundamental properties of the silicone technology to the paint film: water repellency and permeability to water vapour.
BLUESIL BP 9900 Elkem Silicones BLUESIL BP 9900 is a non ionic, APEO free, polyorganosiloxane aqueous emulsion, to be used as a water repellent additive for building materials.
BLUESIL BP 9920 Elkem Silicones BLUESIL BP 9920is anon-ionic, APEO free, polyorganosiloxane aqueous emulsion, to be used as a water repellent additive in various formulations for building materials.
BLUESIL EMUL 1803 Elkem Silicones BLUESIL EMUL 1803 is a non-ionic silicone emulsion containing silicone oil and resin. This emulsion is intended for mould-release of cast polyurethane elastomers.
BLUESIL EMUL 269 Elkem Silicones BLUESIL EMUL 269 is an aqueous emulsion of an hydrogeno polysiloxane.
BLUESIL EMUL 284 Elkem Silicones ​BLUESIL EMUL 284 is a slightly ionic oil-in-water type emulsion of a high viscosity a/w-hydroxydimethylpolysiloxane fluid. BLUESIL EMUL 284 is characterised by its reactivity, its outstanding stability, its lubricating power and its fabric softening prop...展开 ​BLUESIL EMUL 284 is a slightly ionic oil-in-water type emulsion of a high viscosity a/w-hydroxydimethylpolysiloxane fluid. BLUESIL EMUL 284 is characterised by its reactivity, its outstanding stability, its lubricating power and its fabric softening properties (textile applications). 收起
BLUESIL EMUL 3500 Elkem Silicones BLUESIL EMUL 3500 is a general purpose; non-ionic oil in water silicone emulsion, of a high viscosity hydroxyl terminated polysiloxane.
BLUESIL EMUL 35B Elkem Silicones BLUESIL EMUL 35B is an oil-in-water emulsion containing 35 % silicone oil, which is diluted for use, generally in a proportion of one part of BLUESIL EMUL 35B to 20 to 200 parts of water. Its characteristics are as follows:Practically no tendency to cream...展开 BLUESIL EMUL 35B is an oil-in-water emulsion containing 35 % silicone oil, which is diluted for use, generally in a proportion of one part of BLUESIL EMUL 35B to 20 to 200 parts of water. Its characteristics are as follows:Practically no tendency to cream, neither during storage nor in use.Perfect stability in contact with hard water or zinc (i.e. in galvanized metal containers).Excellent heat stability after dilution.Very good wetting power. 收起
BLUESIL EMUL 55 Elkem Silicones BLUESIL EMUL 55 is a non-ionic, silicone oil-based aqueous emulsion with 35 % active material. It is mainly used as a mould-stripping agent in foundries, and also has applications in the rubber and plastics industries. Moreover, it is one of the component...展开 BLUESIL EMUL 55 is a non-ionic, silicone oil-based aqueous emulsion with 35 % active material. It is mainly used as a mould-stripping agent in foundries, and also has applications in the rubber and plastics industries. Moreover, it is one of the component elements making up polishes and cleaners for artificial leather fabrics (PVC, PUR) and furniture polishes. 收起
BLUESIL EMUL 872 Elkem Silicones BLUESIL EMUL 872 is a slightly anionic aqueous emulsion with a 60% dry content, for general purposes. This is a concentrated version of BLUESIL EMUL E1P.
BLUESIL EMUL E1P Elkem Silicones BLUESIL EMUL E1P is an oil in water emulsion containing 35 % of a silicone oil. It can be used in many industries.
BLUESIL EMUL E1P U1 Elkem Silicones BLUESIL EMUL E1P U1 is a general purpose, non-ionic, aqueous silicone emulsion.
BLUESIL EMULSION 2400 Elkem Silicones ​BLUESIL EMUL 2400 is a general purpose; non-ionic oil in water silicone emulsion of a methyl-hydrogen polysiloxane.
BLUESIL FLD 21625 Elkem Silicones ​BLUESIL FLD 21625is anα/ω-epoxy functionalised polydimethylsiloxane fluid.
BLUESIL FLD 45 Elkem Silicones BLUESIL FLD 45 is a low viscosity dimethylpolysiloxane oil used to prevent floating and flooding and improve leveling of air-drying paints.
BLUESIL FLD 47V1 000 Elkem Silicones BLUESIL FLD 47 V 50 to 47 V 1000 are straight chained polydimethylsiloxanic fluids.
BLUESIL FLD 47V100 Elkem Silicones BLUESIL FLD 47 V 50 to 47 V 1000 are straight chained polydimethylsiloxanic fluids.
BLUESIL FLD 47V350 Elkem Silicones BLUESIL FLD 47 V 50 to 47 V 1000 are straight chained polydimethylsiloxanic fluids.
BLUESIL FLD 47V50 Elkem Silicones BLUESIL FLD 47 V 50 to 47 V 1000 are straight chained polydimethylsiloxanic fluids.
BLUESIL FLD 47V500 Elkem Silicones BLUESIL FLD 47 V 50 to 47 V 1000 are straight chained polydimethylsiloxanic fluids.
BLUESIL PI 2074 Elkem Silicones BLUESIL PI 2074 is a cationic photoinitiator for use with epoxy resins, vinyl ethers or any other type of oligomer which polymerises cationically. It is also suited to the formulation of hybrid radical / cationic systems.
BLUESIL RES 6405 Elkem Silicones BLUESIL RES 6405 is a 50% solids methylphenylsilicone resin in Toluene (6405) or Xylene solution (6405X). This resin is ideal for the formulation of heat resistant coatings for industrial applications with improved weatherability.
BLUESIL RES 6405X Elkem Silicones BLUESIL RES 6405X is a 50% solids methylphenylsilicone resin in Toluene (6405) or Xylene solution (6405X). This resin is ideal for the formulation of heat resistant coatings for industrial applications with improved weatherability.
BLUESIL RES 6406XM Elkem Silicones BLUESIL RES 6406XM is a 60% solids methylphenylsilicone resin in Xylene solution. This resin is designed to formulate heat resistant coatings for industrial applications with improved weatherability.
BLUESIL RES 6407 Elkem Silicones BLUESIL RES 6407 is a 70% solids methylphenylsilicone resin in Toluene solution. This resin is designed to formulate heat resistant coatings for industrial applications with improved weatherability.
BLUESIL RES 6482X Elkem Silicones BLUESIL RES 6482X is a reactive silicone resin which was developed for use in the manufacture of decorative medium temperature paints. Currently this resin is mainly used for the manufacture of air drying, temperature resistant silicone alkyd paints. It i...展开 BLUESIL RES 6482X is a reactive silicone resin which was developed for use in the manufacture of decorative medium temperature paints. Currently this resin is mainly used for the manufacture of air drying, temperature resistant silicone alkyd paints. It is also more compatible than other silicones with urea-formaldehyde, melamine-formaldehyde, epoxy, polyurethane and acrylic resins. Another use is as an additive for epoxy paints. It also improves weathering resistance. 收起
BLUESIL SP 3300 Elkem Silicones BLUESIL SP 3300 is a non hydrolysable silicone polyether copolymer.
BLUESIL SP 3303 Elkem Silicones BLUESIL SP 3303 is a polyether modified polysiloxane.
BLUESIL SP 3307 Elkem Silicones BLUESIL SP 3307 is a polyether modified polysiloxane.
BLUESIL TCS 7001 Elkem Silicones BLUESIL TCS 7001 is an alkyl polysiloxane solution in solvent phase specifically developed for the waterproofing of fabrics and leathers exposed to difficult weather conditions by spraying or impregnating.
Request Sample BPA Epoxy Resin SM-601RX75 Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 BPA Epoxy Resin SM-601RX75 is a Xylene solvent based epoxy resin used in the coatings industry.
Request Sample BPA Epoxy Resin SM-601X75 Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 BPA Epoxy Resin SM-601X75 is a Xylene solvent based epoxy resin used in the coatings industry.
Request Sample BPA Epoxy Resin SM-634RX80 Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 BPA Epoxy Resin SM-634RX80 is a Xylene solvent based epoxy resin used in the coatings industry.
Request Sample BPA Epoxy Resin SM-634RX90 Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 BPA Epoxy Resin SM-634RX90 is a Xylene solvent based epoxy resin used in the coatings industry.
Request Sample BPA Epoxy Resin SM-828X90 Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 BPA Epoxy Resin SM-828X90 is a Xylene solvent based epoxy resin used in the coatings industry.
Benzidine Orange R Emperor Pigment Co., Ltd. Benzidine Orange R is a yellowish colored pigment that is used in solvent inks, aqueous inks, and aqueous coatings. It has a density value of 1.4 and a pH value of 7. This product has a color index number of Pigment Orange 16, a CAS number of 6505-28-8, a...展开 Benzidine Orange R is a yellowish colored pigment that is used in solvent inks, aqueous inks, and aqueous coatings. It has a density value of 1.4 and a pH value of 7. This product has a color index number of Pigment Orange 16, a CAS number of 6505-28-8, and an EU number of 229-388-1. 收起
Benzidine Yellow 121H Emperor Pigment Co., Ltd. Benzidine Yellow 121H is a pigment that is bright yellow in color. It has a color index number of Pigment Yellow 12, a CAS number of 6358-85-6, and an EU number of 228-787-8. This product has a density value of 1.5, a pH value of 6.0 to 7.0, and is used i...展开 Benzidine Yellow 121H is a pigment that is bright yellow in color. It has a color index number of Pigment Yellow 12, a CAS number of 6358-85-6, and an EU number of 228-787-8. This product has a density value of 1.5, a pH value of 6.0 to 7.0, and is used in PA inks, NC inks, PP inks, and Toluene based inks. 收起
Benzidine Yellow DHG Emperor Pigment Co., Ltd. Benzidine Yellow DHG is a bright yellow colored pigment that is used in offset inks and textile printing. It has a density value of 1.5 and a pH value of 6.0 to 7.0. This product has a color index number of Pigment Yellow 12, a CAS number of 6358-85-6, an...展开 Benzidine Yellow DHG is a bright yellow colored pigment that is used in offset inks and textile printing. It has a density value of 1.5 and a pH value of 6.0 to 7.0. This product has a color index number of Pigment Yellow 12, a CAS number of 6358-85-6, and an EU number of 228-787-8. 收起
Benzidine Yellow G Emperor Pigment Co., Ltd. Benzidine Yellow G is a pigment that is reddish yellow and transparent in color. It has a color index number of Pigment Yellow 12, a CAS number of 6358-85-6, and an EU number of 228-787-8. This product has a density value of 1.5, a pH value of 6.0 to 7.0,...展开 Benzidine Yellow G is a pigment that is reddish yellow and transparent in color. It has a color index number of Pigment Yellow 12, a CAS number of 6358-85-6, and an EU number of 228-787-8. This product has a density value of 1.5, a pH value of 6.0 to 7.0, and is used in offset inks, waterbased inks, and textile printing. 收起
Benzidine Yellow G-A Emperor Pigment Co., Ltd. Benzidine Yellow G-A is a pigment that is reddish yellow in color. It has a color index number of Pigment Yellow 12, a CAS number of 6358-85-6, and an EU number of 228-787-8. This product has a density value of 1.5, a pH value of 6.0 to 7.0, and is used i...展开 Benzidine Yellow G-A is a pigment that is reddish yellow in color. It has a color index number of Pigment Yellow 12, a CAS number of 6358-85-6, and an EU number of 228-787-8. This product has a density value of 1.5, a pH value of 6.0 to 7.0, and is used in offset inks, waterbased inks, and textile printing. 收起
Benzidine Yellow G-B Emperor Pigment Co., Ltd. Benzidine Yellow G-B is a greenish yellow and semitransparent colored pigment that is used in offset inks, waterbased inks, and textile printing. It has a color index number of Pigment Yellow 12, a CAS number of 6358-85-6, and an EU number of 228-787-8. T...展开 Benzidine Yellow G-B is a greenish yellow and semitransparent colored pigment that is used in offset inks, waterbased inks, and textile printing. It has a color index number of Pigment Yellow 12, a CAS number of 6358-85-6, and an EU number of 228-787-8. This product has a density value of 1.5 and a pH value of 6.0 to 7.0. 收起
Benzimidazolone Orange Emperor Pigment Co., Ltd. Benzimidazolone Orange is a pigment that is orange in color. It has a color index number of Pigment Orange 64 and a CAS number of 72102-84-2. This product has a heat stability value of 250 degrees Celsius, an oil absorption value of 40 to 60 grams per 100...展开 Benzimidazolone Orange is a pigment that is orange in color. It has a color index number of Pigment Orange 64 and a CAS number of 72102-84-2. This product has a heat stability value of 250 degrees Celsius, an oil absorption value of 40 to 60 grams per 100 grams, and is used in paints and printing inks. 收起
Benzimidazolone Orange HL Emperor Pigment Co., Ltd. Benzimidazolone Orange HL is an orange colored pigment that is used in offset inks, solvent inks, aqueous inks, and paints. It has a color index number of Pigment Orange 36, a CAS number of 12236-62-3, and an EU number of 235-462-4. This product has a den...展开 Benzimidazolone Orange HL is an orange colored pigment that is used in offset inks, solvent inks, aqueous inks, and paints. It has a color index number of Pigment Orange 36, a CAS number of 12236-62-3, and an EU number of 235-462-4. This product has a density value of 1.4 and a pH value of 6.5. 收起
Request Sample Bisphenol A Epoxy Diacrylate SM6104 Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 SM6104是标准双酚A环氧丙烯酸酯。它带来低粘度与浅色,并且提供高光泽,硬度和优良的耐化学性。本产品广泛应用于紫外线涂料、油墨和粘合剂等。
Request Sample Bisphenol A Epoxy Resin SM601 Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 Bisphenol A Epoxy Resin SM601 is a low molecular weight, transparent solid without obvious mechanical impurity. It can be used in anti-corrosive coatings, electrophoretic paint, powder coatings, baking paint, can paint and coil coatings.
Request Sample Bisphenol A Epoxy Resin SM601R Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 Bisphenol A Epoxy Resin SM601R is a low molecular weight, transparent solid without obvious mechanical impurity. It can be used in anti-corrosive coatings, electrophoretic paint, powder coatings, baking paint, can paint and coil coatings.
Request Sample Bisphenol A Epoxy Resin SM602R Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 Bisphenol A Epoxy Resin SM602R is a low molecular weight, transparent solid without obvious mechanical impurity. It can be used in anti-corrosive coatings, electrophoretic paint, powder coatings, baking paint, can paint and coil coatings.
Request Sample Bisphenol A Epoxy Resin SM603R Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 Bisphenol A Epoxy Resin SM603R is a low molecular weight, transparent solid without obvious mechanical impurity. It can be used in anti-corrosive coatings, electrophoretic paint, powder coatings, baking paint, can paint and coil coatings.
Request Sample Bisphenol A Epoxy Resin SM603RP Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 Bisphenol A Epoxy Resin SM603RP is a medium molecular weight, transparent solid without obvious mechanical impurity. It can be used in anti-corrosive coatings, electrophoretic paint, powder coatings, baking paint, can paint and coil coatings.
Request Sample Bisphenol A Epoxy Resin SM604R Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 Bisphenol A Epoxy Resin SM604R is a medium molecular weight, transparent solid without obvious mechanical impurity. It can be used in anti-corrosive coatings, electrophoretic paint, powder coatings, baking paint, can paint and coil coatings.
Request Sample Bisphenol A Epoxy Resin SM607 Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 Bisphenol A Epoxy Resin SM607 is a medium molecular weight, transparent solid without obvious mechanical impurity. It can be used in anti-corrosive coatings, electrophoretic paint, powder coatings, baking paint, can paint and coil coatings.
Request Sample Bisphenol A Epoxy Resin SM607R Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 Bisphenol A Epoxy Resin SM607R is a high molecular weight, transparent solid without obvious mechanical impurity. It can be used in anti-corrosive coatings, electrophoretic paint, powder coatings, baking paint, can paint and coil coatings.
Request Sample Bisphenol A Epoxy Resin SM609 Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 Bisphenol A Epoxy Resin SM609 is a high molecular weight, transparent solid without obvious mechanical impurity. It can be used in anti-corrosive coatings, electrophoretic paint, powder coatings, baking paint, can paint and coil coatings.
Request Sample Bisphenol A Epoxy Resin SM6091 Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 Bisphenol A Epoxy Resin SM6091 is a high molecular weight, transparent solid without obvious mechanical impurity. It can be used in anti-corrosive coatings, electrophoretic paint, powder coatings, baking paint, can paint and coil coatings.
Request Sample Bisphenol A Epoxy Resin SM609R Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 Bisphenol A Epoxy Resin SM609R is a high molecular weight, transparent solid without obvious mechanical impurity. It can be used in anti-corrosive coatings, electrophoretic paint, powder coatings, baking paint, can paint and coil coatings.
Request Sample Bisphenol A Epoxy Resin SM6101 Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 Bisphenol A Epoxy Resin SM6101 is a transparent liquid without obvious mechanical impurity and a moderate viscosity. It can be used for the coatings industry.
Request Sample Bisphenol A Epoxy Resin SM618 Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 Bisphenol A Epoxy Resin SM618 is a transparent liquid without obvious mechanical impurity and a low viscosity. It has good electric insulation and is used in solvent-free coatings, self-leveling coatings, electronic and electrical equipments, potting comp...展开 Bisphenol A Epoxy Resin SM618 is a transparent liquid without obvious mechanical impurity and a low viscosity. It has good electric insulation and is used in solvent-free coatings, self-leveling coatings, electronic and electrical equipments, potting compounds and laminated material. 收起
Request Sample Bisphenol A Epoxy Resin SM634 Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 Bisphenol A Epoxy Resin SM634 is an unmodified semi-solid diglycidyl ether of Bisphenol A. It is used in high solid protective coatings, tank linings, adhesives, coal tar based coatings and flooring.
Request Sample Bisphenol A Epoxy Resin SM634H Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 Bisphenol A Epoxy Resin SM634H is a transparent semi-solid without obvious mechanical impurity. It is used in casting material, coatings and reinforced plastic products.
Request Sample Bisphenol A Epoxy Resin SM638 Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 Bisphenol A Epoxy Resin SM638 is an unmodified semi-solid diglycidyl ether of Bisphenol A. It is used in high solid protective coatings, electrical castings and adhesives.
Request Sample Bisphenol A Epoxy Resin SM815CA Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 Bisphenol A Epoxy Resin SM815CA is a transparent liquid without obvious mechanical impurity and a low viscosity. It has good electric insulation and is used in solvent-free coatings, self-leveling coatings, electronic and electrical equipments, potting co...展开 Bisphenol A Epoxy Resin SM815CA is a transparent liquid without obvious mechanical impurity and a low viscosity. It has good electric insulation and is used in solvent-free coatings, self-leveling coatings, electronic and electrical equipments, potting compounds and laminated material. 收起
Request Sample Bisphenol A Epoxy Resin SM827 Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 Bisphenol A Epoxy Resin SM827 is an unmodified high purity, medium viscosity, general purpose diglycidyl ether of Bisphenal A. It has lower viscosity, lower reactivity with amines and anhydrides. It is used in high solid solvent free coatings, potting, la...展开 Bisphenol A Epoxy Resin SM827 is an unmodified high purity, medium viscosity, general purpose diglycidyl ether of Bisphenal A. It has lower viscosity, lower reactivity with amines and anhydrides. It is used in high solid solvent free coatings, potting, laminates, electrical and electronics. 收起
Request Sample Bisphenol A Epoxy Resin SM828 Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 Bisphenol A Epoxy Resin SM828 is an unmodified liquid diglycidyl ether of Bisphenol A. It provides excellent mechanical strength and chemical resistance in a cured state. It has a very low level of ionic impurities and can be used in adhesives, grouts, CE...展开 Bisphenol A Epoxy Resin SM828 is an unmodified liquid diglycidyl ether of Bisphenol A. It provides excellent mechanical strength and chemical resistance in a cured state. It has a very low level of ionic impurities and can be used in adhesives, grouts, CED paints, potting, solvent-free coatings, electrical and electronics. 收起
Request Sample Bisphenol A Epoxy Resin SM828S Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 Bisphenol A Epoxy Resin SM828S is an unmodified liquid epoxy resin reaction product of Bisphenol A and epichlorohydrin. It shows much better crystallization resistance compared for standard liquid resin. When it is cured with the appropriate hardener, it ...展开 Bisphenol A Epoxy Resin SM828S is an unmodified liquid epoxy resin reaction product of Bisphenol A and epichlorohydrin. It shows much better crystallization resistance compared for standard liquid resin. When it is cured with the appropriate hardener, it gives excellent mechanical, chemical and adhesion properties. It is used in high solid solvent-free coatings, adhesives, composites, civil engineering and construction. 收起
Request Sample Bisphenol F Epoxy Resin (BPF) Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 Bisphenol F Epoxy Resin (BPF) is an epoxy resin used in the paints and coatings industry.
Request Sample Bisphenol F Epoxy Resin SMF-170 Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 Bisphenol F Epoxy Resin SMF-170 is a general-purpose unmodified low viscosity diglycidyl ether of Bisphenol F. In addition to offering advantage in terms of processing due to viscosity, it provides better chemical resistance compared to Bisphenol-A based ...展开 Bisphenol F Epoxy Resin SMF-170 is a general-purpose unmodified low viscosity diglycidyl ether of Bisphenol F. In addition to offering advantage in terms of processing due to viscosity, it provides better chemical resistance compared to Bisphenol-A based liquid resins. It is used in adhesives for electronic applications, chemical resistance coatings, industrial floors and laminates. 收起
Request Sample Bisphenol F Epoxy Resin SMF-175S Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 Bisphenol F Epoxy Resin SMF-175S is an epoxy resin used for coatings, building and electrical insulating materials.
Request Sample Bisphenol F Epoxy Resin SMF-2001 Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 Bisphenol F Epoxy Resin SMF-2001 is an epoxy resin used for material, building and electrical insulating materials.
Request Sample Bisphenol F Epoxy Resin SMF-2004 Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 Bisphenol F Epoxy Resin SMF-2004 is an epoxy resin with a high softening point and good flexibility. It is used in powder coatings.
Request Sample Bisphenol F Epoxy Resin SMF-2005 Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 Bisphenol F Epoxy Resin SMF-2005 is an epoxy resin with a high softening point and good flexibility. It is used in powder coatings.
Request Sample Brominated Epoxy Resin EX-23-80 Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 Brominated Epoxy Resin EX-23-80 is an epoxy resin treated for flame retardant coatings.
Request Sample Brominated Epoxy Resin EX-23-80A Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 Brominated Epoxy Resin EX-23-80A is an epoxy resin treated for flame retardant coatings.
Request Sample Brominated Epoxy Resin SMB-360 Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 Brominated Epoxy Resin SMB-360 is an epoxy resin treated for flame retardant coatings.
Request Sample Brominated Epoxy Resin SMB-400 Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 Brominated Epoxy Resin SMB-400 is an epoxy resin treated for flame retardant coatings.
Request Sample Brominated Epoxy Resin SMB-400EK60 Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 Brominated Epoxy Resin SMB-400EK60 is an epoxy resin treated for flame retardant coatings.
Request Sample Brominated Epoxy Resin SMB-400T60 Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 Brominated Epoxy Resin SMB-400T60 is an epoxy resin treated for flame retardant coatings.
Request Sample Brominated Epoxy Resin SMB-405 Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 Brominated Epoxy Resin SMB-405 is an epoxy resin treated for flame retardant coatings.
Request Sample Brominated Epoxy Resin SMB-450A-80 Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 Brominated Epoxy Resin SMB-450A-80 is an epoxy resin treated for flame retardant coatings.
Request Sample Brominated Epoxy Resin SMB-500A-80 Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 Brominated Epoxy Resin SMB-500A-80 is an epoxy resin treated for flame retardant coatings.
Request Sample Brominated Epoxy Resin SMB-500EK-80 Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 Brominated Epoxy Resin SMB-500EK-80 is an epoxy resin treated for flame retardant coatings.
Request Sample Brominated Epoxy Resin SMB-530EK-80 Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 Brominated Epoxy Resin SMB-530EK-80 is an epoxy resin treated for flame retardant coatings.
Request Sample CAC (2-Ethoxyethyl Acetate) Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 CAC是一种无色液体,能与一般有机溶剂混溶,溶于水。有令人愉快的酯类香。用作溶剂,与其他化合物配合用作皮革粘合剂、油漆剥离剂、金属热镀抗腐蚀涂料等。
CAF 2534 Elkem Silicones CAF 2534 is a one component silicone rubber that cures when in contact with air humidity. It is intended for use as a formulation base for the development of tie-coats in the fouling release treatment of boat hulls.
CCR 110 CINKARNA CCR is an ultrafine, nanoparticle version of a rutile titanium dioxide pigment. This product has been surface modified. It can be used in transparent UV coatings for various substrates.
CCR 130 CINKARNA CCR 130 is an ultrafine, nanoparticle version of a rutile titanium dioxide pigment. This product has been surface modified. It can be used in transparent UV coatings for various substrates.
CCR 150 CINKARNA CCR 150 is an ultrafine, nanoparticle version of a rutile titanium dioxide pigment. This product has been surface-modified. It can be used in transparent UV coatings for various substrates.
CF1-135 NuSil Silicone Technology 1 CF1-135 is high technology translucent silicone primer that is specifically formulated for use with platinum cured systems where conventional primers are insufficient. This product can help improve the adhesion of addition-cured systems to different subst...展开 CF1-135 is high technology translucent silicone primer that is specifically formulated for use with platinum cured systems where conventional primers are insufficient. This product can help improve the adhesion of addition-cured systems to different substrates such as metals, ceramics, glass, some plastics and other silicone material. It is a one-component primer that is supplied in VM&P Napththa and it requires no mixing. 收起
CF1-141 NuSil Silicone Technology 1 CF1-141 is a high technology silicone primer that is specially formulated to be used with platinum-cured systems and is colored red to provide an easy visual determination of surface coverage. It is a lower Volatile Organic Component (VOC) product and air...展开 CF1-141 is a high technology silicone primer that is specially formulated to be used with platinum-cured systems and is colored red to provide an easy visual determination of surface coverage. It is a lower Volatile Organic Component (VOC) product and air dries. This primer improves adhesion of addition-cured systems to various substrates such as glass, metals, plastics, ceramics and other silicone materials. 收起
CF1-3510 NuSil Silicone Technology 1 CF1-3510 is a fluorosilicone potting and encapsulating elastomer that cures with the addition of heat. It is best used for applications that require solvent resistance and for molding parts such as stoppers, o-rings, and seals. This product can also be us...展开 CF1-3510 is a fluorosilicone potting and encapsulating elastomer that cures with the addition of heat. It is best used for applications that require solvent resistance and for molding parts such as stoppers, o-rings, and seals. This product can also be used as an encapsulating, potting and sealing material and it is best used in applications requiring an operating temperature range of -65°C to 240°C (-85°F to 465°F). 收起
CF1-3710-2 NuSil Silicone Technology 1 CF1-3710-2 is a fluorosilicone foam that has a 1:1 ratio with a white Part A and gray Part B for easy identification and mixing. This product cures very quickly at room temperature to an elastomeric foam. It can be used as a solvent resistant seal or in s...展开 CF1-3710-2 is a fluorosilicone foam that has a 1:1 ratio with a white Part A and gray Part B for easy identification and mixing. This product cures very quickly at room temperature to an elastomeric foam. It can be used as a solvent resistant seal or in shock and vibration dampening situations that require a flexible, light weight foam with exceptional radiation resistance and thermal insulation. This foam is especially useful where stability at higher and lower temperatures is required. 收起
CF1-3800 NuSil Silicone Technology 1 CF1-3800 is a thermally conductive, fluorosilicone elastomer that cures at room temperature, or rapidly with the addition of heat. It can be used to adhere covers on housings, modules, and other configurations that require a non-flowable material. This pr...展开 CF1-3800 is a thermally conductive, fluorosilicone elastomer that cures at room temperature, or rapidly with the addition of heat. It can be used to adhere covers on housings, modules, and other configurations that require a non-flowable material. This product can also be utilized as an adhesive, sealant or molding material when solvent resistance is needed. It can provide the transfer of heat between electrical components and heat sinks, and can operate at a temperature range of -65°C to 225°C (-85°F to 437°F). 收起
CF19-2186 NuSil Silicone Technology 1 CF19-2186 is a general purpose silicone elastomer that has a medium cure rate and is provided in mix and dispense applicators. This product can provide protection for assemblies and electronic components against, vibration, shock, ozone, moisture, dust an...展开 CF19-2186 is a general purpose silicone elastomer that has a medium cure rate and is provided in mix and dispense applicators. This product can provide protection for assemblies and electronic components against, vibration, shock, ozone, moisture, dust and other contaminants. It can also be utilized as an encapsulating or potting material, and can replicate surfaces and devices. 收起
CF19-2615 NuSil Silicone Technology 1 CF19-2615 is a two-part, silicone elastomer that is optically clear and solvent free. It cures at room temperature or rapidly with the addition of heat. This product can be use for photonics applications such as photo detectors, HBLEDs, lasers, flat panel...展开 CF19-2615 is a two-part, silicone elastomer that is optically clear and solvent free. It cures at room temperature or rapidly with the addition of heat. This product can be use for photonics applications such as photo detectors, HBLEDs, lasers, flat panel displays and discrete optics that require a 1.41 refractive index. It can also provide protection to electronic components and assemblies against vibration, shock, moisture, dust and other environmental hazards. 收起