UL Prospector

成功!

成功保存搜索结果
Aromatic Urethane Hexaacrylate SM6329 Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 SM6329是一种芳香族聚氨酯六丙烯酸酯。它提供了很高的反应性和硬度,并提供了耐磨性和耐化学性。SM6329广泛用于UV固化涂料、粘合剂和油墨。
BPA Epoxy Resin SM-601RX75 Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 BPA Epoxy Resin SM-601RX75 is a Xylene solvent based epoxy resin used in the coatings industry.
BPA Epoxy Resin SM-601X75 Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 BPA Epoxy Resin SM-601X75 is a Xylene solvent based epoxy resin used in the coatings industry.
BPA Epoxy Resin SM-634RX80 Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 BPA Epoxy Resin SM-634RX80 is a Xylene solvent based epoxy resin used in the coatings industry.
BPA Epoxy Resin SM-634RX90 Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 BPA Epoxy Resin SM-634RX90 is a Xylene solvent based epoxy resin used in the coatings industry.
BPA Epoxy Resin SM-828X90 Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 BPA Epoxy Resin SM-828X90 is a Xylene solvent based epoxy resin used in the coatings industry.
Benzidine Orange R Emperor Pigment Co., Ltd. Benzidine Orange R is a yellowish colored pigment that is used in solvent inks, aqueous inks, and aqueous coatings. It has a density value of 1.4 and a pH value of 7. This product has a color index number of Pigment Orange 16, a CAS number of 6505-28-8, a...展开 Benzidine Orange R is a yellowish colored pigment that is used in solvent inks, aqueous inks, and aqueous coatings. It has a density value of 1.4 and a pH value of 7. This product has a color index number of Pigment Orange 16, a CAS number of 6505-28-8, and an EU number of 229-388-1. 收起
Benzidine Yellow 121H Emperor Pigment Co., Ltd. Benzidine Yellow 121H is a pigment that is bright yellow in color. It has a color index number of Pigment Yellow 12, a CAS number of 6358-85-6, and an EU number of 228-787-8. This product has a density value of 1.5, a pH value of 6.0 to 7.0, and is used i...展开 Benzidine Yellow 121H is a pigment that is bright yellow in color. It has a color index number of Pigment Yellow 12, a CAS number of 6358-85-6, and an EU number of 228-787-8. This product has a density value of 1.5, a pH value of 6.0 to 7.0, and is used in PA inks, NC inks, PP inks, and Toluene based inks. 收起
Benzidine Yellow DHG Emperor Pigment Co., Ltd. Benzidine Yellow DHG is a bright yellow colored pigment that is used in offset inks and textile printing. It has a density value of 1.5 and a pH value of 6.0 to 7.0. This product has a color index number of Pigment Yellow 12, a CAS number of 6358-85-6, an...展开 Benzidine Yellow DHG is a bright yellow colored pigment that is used in offset inks and textile printing. It has a density value of 1.5 and a pH value of 6.0 to 7.0. This product has a color index number of Pigment Yellow 12, a CAS number of 6358-85-6, and an EU number of 228-787-8. 收起
Benzidine Yellow G Emperor Pigment Co., Ltd. Benzidine Yellow G is a pigment that is reddish yellow and transparent in color. It has a color index number of Pigment Yellow 12, a CAS number of 6358-85-6, and an EU number of 228-787-8. This product has a density value of 1.5, a pH value of 6.0 to 7.0,...展开 Benzidine Yellow G is a pigment that is reddish yellow and transparent in color. It has a color index number of Pigment Yellow 12, a CAS number of 6358-85-6, and an EU number of 228-787-8. This product has a density value of 1.5, a pH value of 6.0 to 7.0, and is used in offset inks, waterbased inks, and textile printing. 收起
Benzidine Yellow G-A Emperor Pigment Co., Ltd. Benzidine Yellow G-A is a pigment that is reddish yellow in color. It has a color index number of Pigment Yellow 12, a CAS number of 6358-85-6, and an EU number of 228-787-8. This product has a density value of 1.5, a pH value of 6.0 to 7.0, and is used i...展开 Benzidine Yellow G-A is a pigment that is reddish yellow in color. It has a color index number of Pigment Yellow 12, a CAS number of 6358-85-6, and an EU number of 228-787-8. This product has a density value of 1.5, a pH value of 6.0 to 7.0, and is used in offset inks, waterbased inks, and textile printing. 收起
Benzidine Yellow G-B Emperor Pigment Co., Ltd. Benzidine Yellow G-B is a greenish yellow and semitransparent colored pigment that is used in offset inks, waterbased inks, and textile printing. It has a color index number of Pigment Yellow 12, a CAS number of 6358-85-6, and an EU number of 228-787-8. T...展开 Benzidine Yellow G-B is a greenish yellow and semitransparent colored pigment that is used in offset inks, waterbased inks, and textile printing. It has a color index number of Pigment Yellow 12, a CAS number of 6358-85-6, and an EU number of 228-787-8. This product has a density value of 1.5 and a pH value of 6.0 to 7.0. 收起
Benzimidazolone Orange Emperor Pigment Co., Ltd. Benzimidazolone Orange is a pigment that is orange in color. It has a color index number of Pigment Orange 64 and a CAS number of 72102-84-2. This product has a heat stability value of 250 degrees Celsius, an oil absorption value of 40 to 60 grams per 100...展开 Benzimidazolone Orange is a pigment that is orange in color. It has a color index number of Pigment Orange 64 and a CAS number of 72102-84-2. This product has a heat stability value of 250 degrees Celsius, an oil absorption value of 40 to 60 grams per 100 grams, and is used in paints and printing inks. 收起
Benzimidazolone Orange HL Emperor Pigment Co., Ltd. Benzimidazolone Orange HL is an orange colored pigment that is used in offset inks, solvent inks, aqueous inks, and paints. It has a color index number of Pigment Orange 36, a CAS number of 12236-62-3, and an EU number of 235-462-4. This product has a den...展开 Benzimidazolone Orange HL is an orange colored pigment that is used in offset inks, solvent inks, aqueous inks, and paints. It has a color index number of Pigment Orange 36, a CAS number of 12236-62-3, and an EU number of 235-462-4. This product has a density value of 1.4 and a pH value of 6.5. 收起
Benzoin Zhejiang Changming Chemical Products Co., Ltd. Benzoin is a disinfectant agent in the form of a white or yellowish needle crystal. This product is used to eliminate air bubbles and pinholes in all kinds of powder coating applications.
Bisphenol A Epoxy Diacrylate SM6104 Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 SM6104是标准双酚A环氧丙烯酸酯。它带来低粘度与浅色,并且提供高光泽,硬度和优良的耐化学性。本产品广泛应用于紫外线涂料、油墨和粘合剂等。
Bisphenol A Epoxy Resin SM601 Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 Bisphenol A Epoxy Resin SM601 is a low molecular weight, transparent solid without obvious mechanical impurity. It can be used in anti-corrosive coatings, electrophoretic paint, powder coatings, baking paint, can paint and coil coatings.
Bisphenol A Epoxy Resin SM601R Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 Bisphenol A Epoxy Resin SM601R is a low molecular weight, transparent solid without obvious mechanical impurity. It can be used in anti-corrosive coatings, electrophoretic paint, powder coatings, baking paint, can paint and coil coatings.
Bisphenol A Epoxy Resin SM602R Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 Bisphenol A Epoxy Resin SM602R is a low molecular weight, transparent solid without obvious mechanical impurity. It can be used in anti-corrosive coatings, electrophoretic paint, powder coatings, baking paint, can paint and coil coatings.
Bisphenol A Epoxy Resin SM603R Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 Bisphenol A Epoxy Resin SM603R is a low molecular weight, transparent solid without obvious mechanical impurity. It can be used in anti-corrosive coatings, electrophoretic paint, powder coatings, baking paint, can paint and coil coatings.
Bisphenol A Epoxy Resin SM603RP Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 Bisphenol A Epoxy Resin SM603RP is a medium molecular weight, transparent solid without obvious mechanical impurity. It can be used in anti-corrosive coatings, electrophoretic paint, powder coatings, baking paint, can paint and coil coatings.
Bisphenol A Epoxy Resin SM604R Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 Bisphenol A Epoxy Resin SM604R is a medium molecular weight, transparent solid without obvious mechanical impurity. It can be used in anti-corrosive coatings, electrophoretic paint, powder coatings, baking paint, can paint and coil coatings.
Bisphenol A Epoxy Resin SM607 Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 Bisphenol A Epoxy Resin SM607 is a medium molecular weight, transparent solid without obvious mechanical impurity. It can be used in anti-corrosive coatings, electrophoretic paint, powder coatings, baking paint, can paint and coil coatings.
Bisphenol A Epoxy Resin SM607R Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 Bisphenol A Epoxy Resin SM607R is a high molecular weight, transparent solid without obvious mechanical impurity. It can be used in anti-corrosive coatings, electrophoretic paint, powder coatings, baking paint, can paint and coil coatings.
Bisphenol A Epoxy Resin SM609 Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 Bisphenol A Epoxy Resin SM609 is a high molecular weight, transparent solid without obvious mechanical impurity. It can be used in anti-corrosive coatings, electrophoretic paint, powder coatings, baking paint, can paint and coil coatings.
Bisphenol A Epoxy Resin SM6091 Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 Bisphenol A Epoxy Resin SM6091 is a high molecular weight, transparent solid without obvious mechanical impurity. It can be used in anti-corrosive coatings, electrophoretic paint, powder coatings, baking paint, can paint and coil coatings.
Bisphenol A Epoxy Resin SM609R Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 Bisphenol A Epoxy Resin SM609R is a high molecular weight, transparent solid without obvious mechanical impurity. It can be used in anti-corrosive coatings, electrophoretic paint, powder coatings, baking paint, can paint and coil coatings.
Bisphenol A Epoxy Resin SM6101 Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 Bisphenol A Epoxy Resin SM6101 is a transparent liquid without obvious mechanical impurity and a moderate viscosity. It can be used for the coatings industry.
Bisphenol A Epoxy Resin SM618 Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 Bisphenol A Epoxy Resin SM618 is a transparent liquid without obvious mechanical impurity and a low viscosity. It has good electric insulation and is used in solvent-free coatings, self-leveling coatings, electronic and electrical equipments, potting comp...展开 Bisphenol A Epoxy Resin SM618 is a transparent liquid without obvious mechanical impurity and a low viscosity. It has good electric insulation and is used in solvent-free coatings, self-leveling coatings, electronic and electrical equipments, potting compounds and laminated material. 收起
Bisphenol A Epoxy Resin SM634 Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 Bisphenol A Epoxy Resin SM634 is an unmodified semi-solid diglycidyl ether of Bisphenol A. It is used in high solid protective coatings, tank linings, adhesives, coal tar based coatings and flooring.
Bisphenol A Epoxy Resin SM634H Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 Bisphenol A Epoxy Resin SM634H is a transparent semi-solid without obvious mechanical impurity. It is used in casting material, coatings and reinforced plastic products.
Bisphenol A Epoxy Resin SM638 Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 Bisphenol A Epoxy Resin SM638 is an unmodified semi-solid diglycidyl ether of Bisphenol A. It is used in high solid protective coatings, electrical castings and adhesives.
Bisphenol A Epoxy Resin SM815CA Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 Bisphenol A Epoxy Resin SM815CA is a transparent liquid without obvious mechanical impurity and a low viscosity. It has good electric insulation and is used in solvent-free coatings, self-leveling coatings, electronic and electrical equipments, potting co...展开 Bisphenol A Epoxy Resin SM815CA is a transparent liquid without obvious mechanical impurity and a low viscosity. It has good electric insulation and is used in solvent-free coatings, self-leveling coatings, electronic and electrical equipments, potting compounds and laminated material. 收起
Bisphenol A Epoxy Resin SM827 Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 Bisphenol A Epoxy Resin SM827 is an unmodified high purity, medium viscosity, general purpose diglycidyl ether of Bisphenal A. It has lower viscosity, lower reactivity with amines and anhydrides. It is used in high solid solvent free coatings, potting, la...展开 Bisphenol A Epoxy Resin SM827 is an unmodified high purity, medium viscosity, general purpose diglycidyl ether of Bisphenal A. It has lower viscosity, lower reactivity with amines and anhydrides. It is used in high solid solvent free coatings, potting, laminates, electrical and electronics. 收起
Bisphenol A Epoxy Resin SM828 Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 Bisphenol A Epoxy Resin SM828 is an unmodified liquid diglycidyl ether of Bisphenol A. It provides excellent mechanical strength and chemical resistance in a cured state. It has a very low level of ionic impurities and can be used in adhesives, grouts, CE...展开 Bisphenol A Epoxy Resin SM828 is an unmodified liquid diglycidyl ether of Bisphenol A. It provides excellent mechanical strength and chemical resistance in a cured state. It has a very low level of ionic impurities and can be used in adhesives, grouts, CED paints, potting, solvent-free coatings, electrical and electronics. 收起
Bisphenol A Epoxy Resin SM828S Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 Bisphenol A Epoxy Resin SM828S is an unmodified liquid epoxy resin reaction product of Bisphenol A and epichlorohydrin. It shows much better crystallization resistance compared for standard liquid resin. When it is cured with the appropriate hardener, it ...展开 Bisphenol A Epoxy Resin SM828S is an unmodified liquid epoxy resin reaction product of Bisphenol A and epichlorohydrin. It shows much better crystallization resistance compared for standard liquid resin. When it is cured with the appropriate hardener, it gives excellent mechanical, chemical and adhesion properties. It is used in high solid solvent-free coatings, adhesives, composites, civil engineering and construction. 收起
Bisphenol F Epoxy Resin (BPF) Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 Bisphenol F Epoxy Resin (BPF) is an epoxy resin used in the paints and coatings industry.
Bisphenol F Epoxy Resin SMF-170 Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 Bisphenol F Epoxy Resin SMF-170 is a general-purpose unmodified low viscosity diglycidyl ether of Bisphenol F. In addition to offering advantage in terms of processing due to viscosity, it provides better chemical resistance compared to Bisphenol-A based ...展开 Bisphenol F Epoxy Resin SMF-170 is a general-purpose unmodified low viscosity diglycidyl ether of Bisphenol F. In addition to offering advantage in terms of processing due to viscosity, it provides better chemical resistance compared to Bisphenol-A based liquid resins. It is used in adhesives for electronic applications, chemical resistance coatings, industrial floors and laminates. 收起
Bisphenol F Epoxy Resin SMF-175S Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 Bisphenol F Epoxy Resin SMF-175S is an epoxy resin used for coatings, building and electrical insulating materials.
Bisphenol F Epoxy Resin SMF-2001 Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 Bisphenol F Epoxy Resin SMF-2001 is an epoxy resin used for material, building and electrical insulating materials.
Bisphenol F Epoxy Resin SMF-2004 Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 Bisphenol F Epoxy Resin SMF-2004 is an epoxy resin with a high softening point and good flexibility. It is used in powder coatings.
Bisphenol F Epoxy Resin SMF-2005 Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 Bisphenol F Epoxy Resin SMF-2005 is an epoxy resin with a high softening point and good flexibility. It is used in powder coatings.
Brominated Epoxy Resin EX-23-80 Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 Brominated Epoxy Resin EX-23-80 is an epoxy resin treated for flame retardant coatings.
Brominated Epoxy Resin EX-23-80A Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 Brominated Epoxy Resin EX-23-80A is an epoxy resin treated for flame retardant coatings.
Brominated Epoxy Resin SMB-360 Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 Brominated Epoxy Resin SMB-360 is an epoxy resin treated for flame retardant coatings.
Brominated Epoxy Resin SMB-400 Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 Brominated Epoxy Resin SMB-400 is an epoxy resin treated for flame retardant coatings.
Brominated Epoxy Resin SMB-400EK60 Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 Brominated Epoxy Resin SMB-400EK60 is an epoxy resin treated for flame retardant coatings.
Brominated Epoxy Resin SMB-400T60 Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 Brominated Epoxy Resin SMB-400T60 is an epoxy resin treated for flame retardant coatings.
Brominated Epoxy Resin SMB-405 Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 Brominated Epoxy Resin SMB-405 is an epoxy resin treated for flame retardant coatings.
Brominated Epoxy Resin SMB-450A-80 Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 Brominated Epoxy Resin SMB-450A-80 is an epoxy resin treated for flame retardant coatings.
Brominated Epoxy Resin SMB-500A-80 Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 Brominated Epoxy Resin SMB-500A-80 is an epoxy resin treated for flame retardant coatings.
Brominated Epoxy Resin SMB-500EK-80 Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 Brominated Epoxy Resin SMB-500EK-80 is an epoxy resin treated for flame retardant coatings.
Brominated Epoxy Resin SMB-530EK-80 Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 Brominated Epoxy Resin SMB-530EK-80 is an epoxy resin treated for flame retardant coatings.
CAC (2-Ethoxyethyl Acetate) Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 CAC是一种无色液体,能与一般有机溶剂混溶,溶于水。有令人愉快的酯类香。用作溶剂,与其他化合物配合用作皮革粘合剂、油漆剥离剂、金属热镀抗腐蚀涂料等。
CCR 110 CINKARNA CCR is an ultrafine, nanoparticle version of a rutile titanium dioxide pigment. This product has been surface modified. It can be used in transparent UV coatings for various substrates.
CCR 130 CINKARNA CCR 130 is an ultrafine, nanoparticle version of a rutile titanium dioxide pigment. This product has been surface modified. It can be used in transparent UV coatings for various substrates.
CCR 150 CINKARNA CCR 150 is an ultrafine, nanoparticle version of a rutile titanium dioxide pigment. This product has been surface-modified. It can be used in transparent UV coatings for various substrates.
CF1-135 NuSil Silicone Technology 1 CF1-135 is high technology translucent silicone primer that is specifically formulated for use with platinum cured systems where conventional primers are insufficient. This product can help improve the adhesion of addition-cured systems to different subst...展开 CF1-135 is high technology translucent silicone primer that is specifically formulated for use with platinum cured systems where conventional primers are insufficient. This product can help improve the adhesion of addition-cured systems to different substrates such as metals, ceramics, glass, some plastics and other silicone material. It is a one-component primer that is supplied in VM&P Napththa and it requires no mixing. 收起
CF1-141 NuSil Silicone Technology 1 CF1-141 is a high technology silicone primer that is specially formulated to be used with platinum-cured systems and is colored red to provide an easy visual determination of surface coverage. It is a lower Volatile Organic Component (VOC) product and air...展开 CF1-141 is a high technology silicone primer that is specially formulated to be used with platinum-cured systems and is colored red to provide an easy visual determination of surface coverage. It is a lower Volatile Organic Component (VOC) product and air dries. This primer improves adhesion of addition-cured systems to various substrates such as glass, metals, plastics, ceramics and other silicone materials. 收起
CF1-3510 NuSil Silicone Technology 1 CF1-3510 is a fluorosilicone potting and encapsulating elastomer that cures with the addition of heat. It is best used for applications that require solvent resistance and for molding parts such as stoppers, o-rings, and seals. This product can also be us...展开 CF1-3510 is a fluorosilicone potting and encapsulating elastomer that cures with the addition of heat. It is best used for applications that require solvent resistance and for molding parts such as stoppers, o-rings, and seals. This product can also be used as an encapsulating, potting and sealing material and it is best used in applications requiring an operating temperature range of -65°C to 240°C (-85°F to 465°F). 收起
CF1-3710-2 NuSil Silicone Technology 1 CF1-3710-2 is a fluorosilicone foam that has a 1:1 ratio with a white Part A and gray Part B for easy identification and mixing. This product cures very quickly at room temperature to an elastomeric foam. It can be used as a solvent resistant seal or in s...展开 CF1-3710-2 is a fluorosilicone foam that has a 1:1 ratio with a white Part A and gray Part B for easy identification and mixing. This product cures very quickly at room temperature to an elastomeric foam. It can be used as a solvent resistant seal or in shock and vibration dampening situations that require a flexible, light weight foam with exceptional radiation resistance and thermal insulation. This foam is especially useful where stability at higher and lower temperatures is required. 收起
CF1-3800 NuSil Silicone Technology 1 CF1-3800 is a thermally conductive, fluorosilicone elastomer that cures at room temperature, or rapidly with the addition of heat. It can be used to adhere covers on housings, modules, and other configurations that require a non-flowable material. This pr...展开 CF1-3800 is a thermally conductive, fluorosilicone elastomer that cures at room temperature, or rapidly with the addition of heat. It can be used to adhere covers on housings, modules, and other configurations that require a non-flowable material. This product can also be utilized as an adhesive, sealant or molding material when solvent resistance is needed. It can provide the transfer of heat between electrical components and heat sinks, and can operate at a temperature range of -65°C to 225°C (-85°F to 437°F). 收起
CF19-2186 NuSil Silicone Technology 1 CF19-2186 is a general purpose silicone elastomer that has a medium cure rate and is provided in mix and dispense applicators. This product can provide protection for assemblies and electronic components against, vibration, shock, ozone, moisture, dust an...展开 CF19-2186 is a general purpose silicone elastomer that has a medium cure rate and is provided in mix and dispense applicators. This product can provide protection for assemblies and electronic components against, vibration, shock, ozone, moisture, dust and other contaminants. It can also be utilized as an encapsulating or potting material, and can replicate surfaces and devices. 收起
CF19-2615 NuSil Silicone Technology 1 CF19-2615 is a two-part, silicone elastomer that is optically clear and solvent free. It cures at room temperature or rapidly with the addition of heat. This product can be use for photonics applications such as photo detectors, HBLEDs, lasers, flat panel...展开 CF19-2615 is a two-part, silicone elastomer that is optically clear and solvent free. It cures at room temperature or rapidly with the addition of heat. This product can be use for photonics applications such as photo detectors, HBLEDs, lasers, flat panel displays and discrete optics that require a 1.41 refractive index. It can also provide protection to electronic components and assemblies against vibration, shock, moisture, dust and other environmental hazards. 收起
CF2-135 NuSil Silicone Technology 1 CF2-135 is a silicone primer that is specifically designed to be used with platinum-cured systems where conventional primers will not be sufficient. This product will help to improve the adhesion of addition-cured systems to various substrates such as woo...展开 CF2-135 is a silicone primer that is specifically designed to be used with platinum-cured systems where conventional primers will not be sufficient. This product will help to improve the adhesion of addition-cured systems to various substrates such as wood, metals, ceramics, plastics, and other silicone materials. For the best bonding results, be sure that the surface being primed is clean and degreased. 收起
CF2-3521 NuSil Silicone Technology 1 CF2-3521 is a translucent fluorosilicone elastomer that cures rapidly with heat from an oven or heating lamp, or at room temperature. It can be utilized in applications that would require a good solvent resistance. This product is especially useful for mo...展开 CF2-3521 is a translucent fluorosilicone elastomer that cures rapidly with heat from an oven or heating lamp, or at room temperature. It can be utilized in applications that would require a good solvent resistance. This product is especially useful for molding parts such as O-rings, stoppers, and seals. 收起
CF2-3521-2 NuSil Silicone Technology 1 CF2-3521-2 is a two part, black, 50 mole % fluorosilicone elastomer that cures at room temperature, or rapidly with heat from a heating lamp or oven. This product can be especially useful for molding parts such as stoppers, seals, and O-rings. It can also...展开 CF2-3521-2 is a two part, black, 50 mole % fluorosilicone elastomer that cures at room temperature, or rapidly with heat from a heating lamp or oven. This product can be especially useful for molding parts such as stoppers, seals, and O-rings. It can also be used in applications that would require a solvent resistance. 收起
CF3-3521 NuSil Silicone Technology 1 CF3-3521 is a fluorosilicone elastomer that can be used with with liquid injection molding equipment. It is an exceptional product to use for molding high quality parts such as gaskets, seals and o-rings. It is also ideal for applications that require a m...展开 CF3-3521 is a fluorosilicone elastomer that can be used with with liquid injection molding equipment. It is an exceptional product to use for molding high quality parts such as gaskets, seals and o-rings. It is also ideal for applications that require a medium hardness silicone and solvent resistance. This product is best utilized in applications that require an operating temperature range of -65 to 240°C (-85 to 465°F). 收起
CF5-3521-2 NuSil Silicone Technology 1 CF5-3521-2 is a two part, 50 mole % fluorosilicone that has a 1:1 Mix Ratio (Part A:B). It can be cured at room temperature, or more rapidly by heating it in an oven or with a heating lamp. The product is especially useful as a coating, sealant, adhesive ...展开 CF5-3521-2 is a two part, 50 mole % fluorosilicone that has a 1:1 Mix Ratio (Part A:B). It can be cured at room temperature, or more rapidly by heating it in an oven or with a heating lamp. The product is especially useful as a coating, sealant, adhesive or molding material in applications that require solvent resistance. 收起
CF6-135 NuSil Silicone Technology 1 CF6-135 is a one-component, high technology silicone primer that is translucent to preserve visibility with translucent products. It is specially designed to be used with platinum cured systems where conventional primers are insufficient. This product wil...展开 CF6-135 is a one-component, high technology silicone primer that is translucent to preserve visibility with translucent products. It is specially designed to be used with platinum cured systems where conventional primers are insufficient. This product will improve the adhesion of addition-cured systems to many different substrates such as glass, metals, plastics, ceramics and other silicone material. 收起
CM101-4 Zhejiang Changming Chemical Products Co., Ltd. CM101-4 is a surface modification agent with low water absorption and small particle size. This product can increase the amount of filling materials and modify the mechanical properties and flowing in any powder coating applications.
CM101-5 Zhejiang Changming Chemical Products Co., Ltd. CM101-5 is a surface modification agent with low water absorption and small particle size. This product can increase the amount of filling materials and modify the mechanical properties and flowing in any powder coating applications.
CM105 Zhejiang Changming Chemical Products Co., Ltd. CM105 is a curing agent in the form of a white powder or flake solid. It has good mechanical properties and weather resistance and has a melting point of 124-129°C. This product is designed to be used in polyester powder coating applications.
CM105A Zhejiang Changming Chemical Products Co., Ltd. CM105A is a curing agent in the form of a white powder or flake solid. It has good mechanical properties and weather resistance and has a melting point of 130-145°C. This product is designed to be used in polyester powder coating applications.
CM208 Zhejiang Changming Chemical Products Co., Ltd. CM208 is a matting agent in the form of a yellowish powder. It is an organic metallic complex with a good curing effect and it can reduce curing time. This product can be used in polyester or primid powder coating applications.
CM31 Zhejiang Changming Chemical Products Co., Ltd. CM31 is a low temperature quick hardener in the form of a pale yellow crystal. It increases mechanical properties and chemical resistance, and provides higher surface gloss. This product can be used in powder coating applications, and is also applicable t...展开 CM31 is a low temperature quick hardener in the form of a pale yellow crystal. It increases mechanical properties and chemical resistance, and provides higher surface gloss. This product can be used in powder coating applications, and is also applicable to epoxy-polyester powders. 收起
CM500W Zhejiang Changming Chemical Products Co., Ltd. CM500W is a slip and degassing agent in the form of a white or pale yellow powder or granule. It helps to reduce coating meltflow viscosity and provide weather resistance. This product can be used in powder coating applications.
CM501 Zhejiang Changming Chemical Products Co., Ltd. CM501 is a liquid flow modifier in the form of a clear viscous resin with a pale yellow color. It reduces surface defects such as craters, fisheyes, pinholes, and orange peel as well as to promote flow and leveling properties in desired products. This pro...展开 CM501 is a liquid flow modifier in the form of a clear viscous resin with a pale yellow color. It reduces surface defects such as craters, fisheyes, pinholes, and orange peel as well as to promote flow and leveling properties in desired products. This product is widely used in various powder coating and liquid coating applications. 收起
CM503 Zhejiang Changming Chemical Products Co., Ltd. CM503 is a solid flow modifier in the form of a pale yellow granular resinous material. It is used to reduce or eliminate coating surface defects such as craters, fisheyes, pinholes, and orange peel as well as to promote flow and leveling properties in de...展开 CM503 is a solid flow modifier in the form of a pale yellow granular resinous material. It is used to reduce or eliminate coating surface defects such as craters, fisheyes, pinholes, and orange peel as well as to promote flow and leveling properties in desired products. This product can be used in powder coating and liquid coating applications. 收起
CM506 Zhejiang Changming Chemical Products Co., Ltd. CM506 is a flow agent in the form of a free-flowing white powder. It does not contain silicon or ketone and it can eliminate the orange peel and craters of film. This product can be used in any powder coating systems.
CM506A Zhejiang Changming Chemical Products Co., Ltd. CM506A is a flow agent in the form of a free-flowing white powder. It does not contain silicon or ketone and it can improve the gloss of the film. This product can be used in any powder coating systems, but it is best used in transparent powder coatings.
CM600 Zhejiang Changming Chemical Products Co., Ltd. CM600 is an electrostatic agent in the form of white to yellowish pearls. It prevents building up of direct current potentials during electrostatic powder spray coating, and it also provides improved storage stability because of a high melting point. This...展开 CM600 is an electrostatic agent in the form of white to yellowish pearls. It prevents building up of direct current potentials during electrostatic powder spray coating, and it also provides improved storage stability because of a high melting point. This product can be used as an excellent polar fatty acid ester electrostatic agent in powder coating applications. 收起
CM618 Zhejiang Changming Chemical Products Co., Ltd. CM618 is a sandy agent in the form of a white flowing powder. This product can cause a sandy texture in films and powder coating applications.
CM633 Zhejiang Changming Chemical Products Co., Ltd. CM633 is a matting agent in the form of a fine white powder. It provides good mechanical and matting properties, and it will not turn yellow even when the powder coatings are over baked. This product can be used in powder coating applications.
CM68 Zhejiang Changming Chemical Products Co., Ltd. CM68 is a matting hardener in the form of an almost white, very fine powder. It provides a smooth semi-matte and matte surface, along with good mechanical properties and chemical resistance. This product can be used in epoxy and epoxy-polyester powder coa...展开 CM68 is a matting hardener in the form of an almost white, very fine powder. It provides a smooth semi-matte and matte surface, along with good mechanical properties and chemical resistance. This product can be used in epoxy and epoxy-polyester powder coating applications. 收起
CM701 Zhejiang Changming Chemical Products Co., Ltd. CM701 is a moistening agent in the form of a white or yellowish powder. It is used to eliminate craters and pinholes and it does not contain silicone or ketone. This product can be used in any powder coating applications.
CM701A Zhejiang Changming Chemical Products Co., Ltd. CM701A is a moistening agent in the form of a white or yellowish powder. It is used to eliminate craters and pinholes and it does not contain silicone or ketone. This product can be used in any powder coating applications.
CV-1142 NuSil Silicone Technology 1 CV-1142 is a non corrosive that has controlled volatility, RTV silicone adhesive/sealant.. It is best used as a sealing, caulking, adhesive or potting material in applications that require little outgassing. This helps to avoid condensation in sensitive d...展开 CV-1142 is a non corrosive that has controlled volatility, RTV silicone adhesive/sealant.. It is best used as a sealing, caulking, adhesive or potting material in applications that require little outgassing. This helps to avoid condensation in sensitive devices. Furthermore, it is also best used for applications requiring extremely low temperatures. 收起
CV-1143 NuSil Silicone Technology 1 CV-1143 is a silicone adhesive/sealant that is best used in applications that require low outgassing and minimal volatile condensables under extreme operating conditions. It is also used as a bond and sealant in applications such as overhead or vertical j...展开 CV-1143 is a silicone adhesive/sealant that is best used in applications that require low outgassing and minimal volatile condensables under extreme operating conditions. It is also used as a bond and sealant in applications such as overhead or vertical joints that require a non-slumping, and one-part materials. 收起
CV-1144-0 NuSil Silicone Technology 1 CV-1144-0 is an oxygen protective silicone overcoat that is used for applications where extremely low temperatures and low outgassing are a hazard. It functions as a protective overcoating for electric components and atomic oxygen resistance in space appl...展开 CV-1144-0 is an oxygen protective silicone overcoat that is used for applications where extremely low temperatures and low outgassing are a hazard. It functions as a protective overcoating for electric components and atomic oxygen resistance in space applications. This product also has a broad operating temperature range and can provide radiation and thermal stress resistance. 收起
CV-1146-2 NuSil Silicone Technology 1 CV-1146-2 is a one part, flat black silicone dispersion that meets outgas specifications outlined in NASA and the European Space Agency. It is an ideal product to use in space and electrical applications that require low outgassing under extreme operating...展开 CV-1146-2 is a one part, flat black silicone dispersion that meets outgas specifications outlined in NASA and the European Space Agency. It is an ideal product to use in space and electrical applications that require low outgassing under extreme operating conditions. It also provides an atomic oxygen protection and resistance to radiation and thermal stress. 收起
CV-1148 NuSil Silicone Technology 1 CV-1148 is a silicone atomic oxygen protective coating that can be use at a broad temperature range. This product is best used for applications that require low outgassing under extreme operating conditions. It exceeds the low outgas specifications outlin...展开 CV-1148 is a silicone atomic oxygen protective coating that can be use at a broad temperature range. This product is best used for applications that require low outgassing under extreme operating conditions. It exceeds the low outgas specifications outlined by NASA and the European Space Agency. 收起
CV-1152 NuSil Silicone Technology 1 CV-1152 is a silicone conformal coating that can be used for industrial or space applications that require low outgassing under extreme operating conditions. It can be utilized as a coating on rigid and flexible circuit boards, and can protect sensitive e...展开 CV-1152 is a silicone conformal coating that can be used for industrial or space applications that require low outgassing under extreme operating conditions. It can be utilized as a coating on rigid and flexible circuit boards, and can protect sensitive electronic components such as connectors and switches. This product can also provide protection against harsh environments while maintaining good dielectric properties. 收起
CV-1161 NuSil Silicone Technology 1 CV-1161 is a pressure sensitive silicone adhesive that retains its adhesive qualities in the presence of minor liquid and particulate contaminants. It can be used in applications that require low outgassing and minimal volatile condesable materials. This ...展开 CV-1161 is a pressure sensitive silicone adhesive that retains its adhesive qualities in the presence of minor liquid and particulate contaminants. It can be used in applications that require low outgassing and minimal volatile condesable materials. This product is ideal for adhering and bonding silicone elastomers, metals, paper, glass, fabric organics rubbers, some synthetics, and films such as polyester or kapton. 收起
CV-1500 NuSil Silicone Technology 1 CV-1500 is a one part, black, electrically conductive RTV silicone adhesive/sealant that can be used for RFI and EMI shielding in electrical and space applications that require static dissipation. It can also protect components from extremes in temperatur...展开 CV-1500 is a one part, black, electrically conductive RTV silicone adhesive/sealant that can be used for RFI and EMI shielding in electrical and space applications that require static dissipation. It can also protect components from extremes in temperature, humidity, radiation, thermal and mechanical stress. This adhesive is well suited for form-in-place conductive gaskets and attaching heating coils to solar collector plates. 收起
CV-2187 NuSil Silicone Technology 1 CV-2187 is a two-part, translucent, pourable silicone system that offers a high tear strength and good physical properties. Its primary function is to provide protection for electrical components against shock, vibration, moisture, dust, chemicals and oth...展开 CV-2187 is a two-part, translucent, pourable silicone system that offers a high tear strength and good physical properties. Its primary function is to provide protection for electrical components against shock, vibration, moisture, dust, chemicals and other environmental hazards. It can also protect potting connectors, cable and harness breakouts, molded high-voltage components, seals and gaskets. 收起
CV-2189-2 NuSil Silicone Technology 1 CV-2189-2 is a one-part, black, platinum catalyzed silicone glop-top that has a thixotropic consistency and a low modulus. The function of this product is to ensure microchip reliability by providing protection against vibration, shock, dust, chemicals an...展开 CV-2189-2 is a one-part, black, platinum catalyzed silicone glop-top that has a thixotropic consistency and a low modulus. The function of this product is to ensure microchip reliability by providing protection against vibration, shock, dust, chemicals and other hazards. It is also ideal for applications that require precise delivery configurations. 收起
CV-2287 NuSil Silicone Technology 1 CV-2287 is a pourable silicone elastomer that offers a high tear strength and a broad operating temperature range. The high tear strength of this product make it ideal for reinforcing potting connectors, cable harness breakouts, molded high-voltage compon...展开 CV-2287 is a pourable silicone elastomer that offers a high tear strength and a broad operating temperature range. The high tear strength of this product make it ideal for reinforcing potting connectors, cable harness breakouts, molded high-voltage components, seals and gaskets. It protects components against moisture, dust , chemicals, shock and vibration. 收起
CV-2289 NuSil Silicone Technology 1 CV-2289 is a two-part translucent silicone elastomer that is ideal for applications that require low outgassing and minimal volatile condensables under extreme operating conditions. This product has good physical properties including a high tear strength ...展开 CV-2289 is a two-part translucent silicone elastomer that is ideal for applications that require low outgassing and minimal volatile condensables under extreme operating conditions. This product has good physical properties including a high tear strength and broad operating temperature range. These properties make this a good product for protecting electric components against environmental hazards such as dust, moisture, shock and vibration. 收起
CV-2289-1 NuSil Silicone Technology 1 CV-2289-1 is a two-part, white silicone system that has a broad operating temperature range. This makes it an ideal product to use as an adhesive for extreme conditions. It can provide protection against moisture, dust, and other environmental hazards. Th...展开 CV-2289-1 is a two-part, white silicone system that has a broad operating temperature range. This makes it an ideal product to use as an adhesive for extreme conditions. It can provide protection against moisture, dust, and other environmental hazards. The high tear strength of this silicone elastomer make it affective in protecting seals, gaskets, and cable harness breakouts. 收起