| R-2180-2 | NuSil Silicone Technology 1 | R-2180-2 is a two-part silicone elastomer dispersed in xylene and two medium viscosity parts of this product blend easily in a 1:1 ratio (Part A:B). This coating is an ideal product to use for dip casting and heat-curing of thin elastomeric films. It tak...展开 R-2180-2 is a two-part silicone elastomer dispersed in xylene and two medium viscosity parts of this product blend easily in a 1:1 ratio (Part A:B). This coating is an ideal product to use for dip casting and heat-curing of thin elastomeric films. It takes a minimum of 30 minutes to cure at an ambient temperature and humidity: 45 minutes @ 75°C (167°F), and 135 minutes @ 150°C (302°F). 收起 | |
| R-2182 | NuSil Silicone Technology 1 | R-2182 is a low coefficient of friction silicone coating that cures to a smooth film that decreases the friction and increases abrasion resistance for moving, sliding, and rubbing parts. It provides a heat-cured, low friction coating on cured silicone sub...展开 R-2182 is a low coefficient of friction silicone coating that cures to a smooth film that decreases the friction and increases abrasion resistance for moving, sliding, and rubbing parts. It provides a heat-cured, low friction coating on cured silicone substrates and results in a reduction of surface tack. It is best to apply by spraying or dipping. 收起 | |
| R-2188 | NuSil Silicone Technology 1 | R-2188 is a silicone potting and encapsulating elastomer that is pourable, self-leveling, and cures at room temperature. This product is ideal for the encapsulating, potting and coating of modules, relays, and a variety of AC/DC converters including high ...展开 R-2188 is a silicone potting and encapsulating elastomer that is pourable, self-leveling, and cures at room temperature. This product is ideal for the encapsulating, potting and coating of modules, relays, and a variety of AC/DC converters including high power and planar packages. It can help protect against shock, vibration, moisture, contaminants and dust. The low viscosity of this elastomer will allow the potting of complex geometries, and it will not trap air. 收起 | |
| R-2370 | NuSil Silicone Technology 1 | R-2370 is a two-part, RTV silicone rubber foam that has a 100:6 Mix Ratio (Base: Catalyst). It yields a low density silicone rubber foam when catalyzed. It is best utilized in shock and vibration dampening situations that require a flexible, light weight ...展开 R-2370 is a two-part, RTV silicone rubber foam that has a 100:6 Mix Ratio (Base: Catalyst). It yields a low density silicone rubber foam when catalyzed. It is best utilized in shock and vibration dampening situations that require a flexible, light weight foam with exceptional electrical and thermal properties. 收起 | |
| R-2380 | NuSil Silicone Technology 1 | R-2380 is a two-part, RTV silicone rubber foam that yields a medium density, and has a 100:6 Mix Ratio (Base: Catalyst). This product is specifically designed to be used in vibration and shock dampening situations that require a lightweight, flexible foam...展开 R-2380 is a two-part, RTV silicone rubber foam that yields a medium density, and has a 100:6 Mix Ratio (Base: Catalyst). This product is specifically designed to be used in vibration and shock dampening situations that require a lightweight, flexible foam that also has exceptional thermal and electrical properties. 收起 | |
| R-2550 | NuSil Silicone Technology 1 | R-2550 is a translucent RTV silicone elastomer has a wide service temperature range. It can be utilized as a heat shielding material for potting, sealing and bonding applications. This product will also be useful in aerospace applications for ablative coa...展开 R-2550 is a translucent RTV silicone elastomer has a wide service temperature range. It can be utilized as a heat shielding material for potting, sealing and bonding applications. This product will also be useful in aerospace applications for ablative coatings that require a material that pours. It can withstand extreme temperatures, operating in a range of -115 to 260°C (-178 to 500°F). 收起 | |
| R-2560 | NuSil Silicone Technology 1 | R-2560 is a two part, pourable, red RTV silicone elastomer that has a base of dimethyl diphenyl silicone copolymer. It can withstand extreme temperatures and can be used for applications that require an operating temperature range of 115°C to 260°C (-175°...展开 R-2560 is a two part, pourable, red RTV silicone elastomer that has a base of dimethyl diphenyl silicone copolymer. It can withstand extreme temperatures and can be used for applications that require an operating temperature range of 115°C to 260°C (-175°F to 500°F). This product can be used for thermal insulating as a firewall sealant, or as an ablative coating in missiles, rockets, aircraft and launch equipment. 收起 | |
| R-2630 | NuSil Silicone Technology 1 | R-2630 is a black, electrically conductive RTV silicone that has a high durometer. It is based on a methyl silicone polymer and has a broad temperature range. This product can be used to adhere covers on housings or where grooves or other configurations r...展开 R-2630 is a black, electrically conductive RTV silicone that has a high durometer. It is based on a methyl silicone polymer and has a broad temperature range. This product can be used to adhere covers on housings or where grooves or other configurations require a flowable to limited flow material with a low viscosity. It can also be used for RFI and EMI shielding for space and electrical applications. It is well suited for formed in place conductive gaskets and has an operating temperature range of 65°C to 200°C (-85°F to 392°F). 收起 | |
| R-2631 | NuSil Silicone Technology 1 | R-2631 is a two-part, black, static dissipative RTV silicone that has a base of methyl silicone polymer. It can provide protection from humidity, radiation, mechanical and thermal stress. This product can also act as an adhesive to bond covers on housings...展开 R-2631 is a two-part, black, static dissipative RTV silicone that has a base of methyl silicone polymer. It can provide protection from humidity, radiation, mechanical and thermal stress. This product can also act as an adhesive to bond covers on housings or where grooves or other configurations require a flowable to limited flow material with a moderate extrusion rate. It is excellent for formed-in-place conductive gaskets and can provide shielding for RFI and EMI in industrial applications. 收起 | |
| R-2634 | NuSil Silicone Technology 1 | R-2634 is a two-part, electrically conductive RTV silicone that is designed for enhanced performance in extreme high and low temperatures. It can be used as an adhesive to bond covers on housings or where grooves and other configurations require a non-flo...展开 R-2634 is a two-part, electrically conductive RTV silicone that is designed for enhanced performance in extreme high and low temperatures. It can be used as an adhesive to bond covers on housings or where grooves and other configurations require a non-flowable material. This product is especially useful for sealing formed-in-place conductive gaskets and grounding connections. It can also be used for EMI and RFI shielding for aerospace and electrical applications. 收起 | |
| R-2637 | NuSil Silicone Technology 1 | R-2637 is a tan, electrically conductive RTV silicone that is designed to cure at room temperature and more rapidly at elevated temperatures. It can be used for RFI and EMI shielding for aerospace applications. This product is excellent for formed-in-plac...展开 R-2637 is a tan, electrically conductive RTV silicone that is designed to cure at room temperature and more rapidly at elevated temperatures. It can be used for RFI and EMI shielding for aerospace applications. This product is excellent for formed-in-place conductive grounding connections and gaskets. It can also be used to adhere covers on housings that require a non-flowable to limited flow material. 收起 | |
| R-2655 | NuSil Silicone Technology 1 | R-2655 is a high strength, transparent RTV silicone elastomer that has a low viscosity and an accelerated cure rate when heat is added. This product can be used to provide environmental protection in potting, encapsulating and coating applications where r...展开 R-2655 is a high strength, transparent RTV silicone elastomer that has a low viscosity and an accelerated cure rate when heat is added. This product can be used to provide environmental protection in potting, encapsulating and coating applications where radiation resistance, low temperature flexibility, oxidation and thermal stability are needed. The low viscosity of this elastomer allows for easy flow around complex parts and it provides exceptional shock and electrical insulation resistance. 收起 | |
| R-2682-12 | NuSil Silicone Technology 1 | R-2682-12 is a RTV silicone film adhesive that cures at room temperature, or rapidly with heat from in an oven or with a heating lamp. It can be used for bonding or sealing silicone elastomers and some metals or plastic. This product can also be used for ...展开 R-2682-12 is a RTV silicone film adhesive that cures at room temperature, or rapidly with heat from in an oven or with a heating lamp. It can be used for bonding or sealing silicone elastomers and some metals or plastic. This product can also be used for applications that would require shorter processing times, easy clean-up, and consistent bond thickness. 收起 | |
| R-2930 | NuSil Silicone Technology 1 | R-2930 is a two-part, white, thermally conductive silicone that cures rapidly with the addition of heat. This product can be used as an adhesive for integrated circuit substrates, heat sinks, base plates or where grooves or other configurations require a ...展开 R-2930 is a two-part, white, thermally conductive silicone that cures rapidly with the addition of heat. This product can be used as an adhesive for integrated circuit substrates, heat sinks, base plates or where grooves or other configurations require a non-flowable to limited flow material. It can also provide the transfer of heat between electrical/electronic components and their heat sinks. 收起 | |
| R-2939 | NuSil Silicone Technology 1 | R-2939 is a two-part, white, pourable, thermally conductive silicone that has a low viscosity and cures rapidly with the addition of heat. It can provide the transfer of heat between electrical/electronic components and their heat sinks. This product is i...展开 R-2939 is a two-part, white, pourable, thermally conductive silicone that has a low viscosity and cures rapidly with the addition of heat. It can provide the transfer of heat between electrical/electronic components and their heat sinks. This product is ideally used as an adhesive for openings in modules and housings where grooves or other configurations require a non-flowable to limited flow material. 收起 | |
| R-2940 | NuSil Silicone Technology 1 | R-2940 is a thermally conductive silicone that has a high strength that can be cured rapidly with the addition of heat. It can be used to adhere base plates, integrated circuit substrates, heat sinks, and other configurations that require a material that ...展开 R-2940 is a thermally conductive silicone that has a high strength that can be cured rapidly with the addition of heat. It can be used to adhere base plates, integrated circuit substrates, heat sinks, and other configurations that require a material that is non-flowable to a limited flow. It can also be used to provide heat transfer between electrical/electronic components and their heat sinks. 收起 | |
| R-2949 | NuSil Silicone Technology 1 | R-2949 is a two-part, white, thermally conductive silicone that can cure rapidly with the addition of heat. It is an ideal product to be used in applications that require protection against extreme low and high temperatures. It can be used as an adhesive ...展开 R-2949 is a two-part, white, thermally conductive silicone that can cure rapidly with the addition of heat. It is an ideal product to be used in applications that require protection against extreme low and high temperatures. It can be used as an adhesive to bond openings in housings and modules where grooves or other configurations require a limited flow material with moderate thermal conductivity. It can also provide the transfer of heat between electrical components and their heat sinks. 收起 | |
| R-3930 | NuSil Silicone Technology 1 | R-3930 is a one-part RTV silicone elastomer dispersed in tert butyl acetate and the slight addition of heat will accelerate the curing process. It is designed for spraying, dip casting, and RTV curing of thin elastomeric films. It can also be utilized for...展开 R-3930 is a one-part RTV silicone elastomer dispersed in tert butyl acetate and the slight addition of heat will accelerate the curing process. It is designed for spraying, dip casting, and RTV curing of thin elastomeric films. It can also be utilized for bonding, coating, and sealing applications that require solvent and/or fuel resistance. It bonds aggressively to most surfaces and can help minimize ice adhesion. 收起 | |
| R-3975 | NuSil Silicone Technology 1 | R-3975 is a one-part RTV silicone elastomer dispersed in tert butyl acetate and the slight addition of heat will accelerate the curing process. It can be utilized for bonding, coating, and sealing applications that require solvent and/or fuel resistance. ...展开 R-3975 is a one-part RTV silicone elastomer dispersed in tert butyl acetate and the slight addition of heat will accelerate the curing process. It can be utilized for bonding, coating, and sealing applications that require solvent and/or fuel resistance. It bonds aggressively to most surfaces and can help minimize ice adhesion. It is designed for spraying, dip casting, and RTV curing of thin elastomeric films. 收起 | |
| R1-2145 | NuSil Silicone Technology 1 | R1-2145 is an extremely tough gray silicone adhesive that rapidly cures at room temperature by applying heat in an oven or a heat gun or lamp. It does not require atmospheric moisture to cure and the product is available in easy to use, airless side by si...展开 R1-2145 is an extremely tough gray silicone adhesive that rapidly cures at room temperature by applying heat in an oven or a heat gun or lamp. It does not require atmospheric moisture to cure and the product is available in easy to use, airless side by side kits that eliminate mixing and deairing, This adhesive can be used for bonding and sealing silicones to each other and other substrates such as metals and plastics. It is ready for rapid production or prototyping due to the a rapid cure. 收起 | |
| R1-3930-11 | NuSil Silicone Technology 1 | R1-3930-11 is a gray fluorosilicone, adhesive, sealant, and coating that bonds aggressively to most surfaces. This product can be utilized for sealing, coating, and bonding applications that require solvent and/or fuel resistance. It can also be used for ...展开 R1-3930-11 is a gray fluorosilicone, adhesive, sealant, and coating that bonds aggressively to most surfaces. This product can be utilized for sealing, coating, and bonding applications that require solvent and/or fuel resistance. It can also be used for bonding or protecting hardware components exposed to gasoline or aviation fuels. It can be further dispersed for spraying applications. 收起 | |
| R2-3930-11 | NuSil Silicone Technology 1 | R2-3930-11 is a gray, two-part, RTV silicone that can be further dispersed for spraying applications. This product can be used to bond or protect hardware components that are exposed to aviation fuels or gasoline. It can also be utilized in applications w...展开 R2-3930-11 is a gray, two-part, RTV silicone that can be further dispersed for spraying applications. This product can be used to bond or protect hardware components that are exposed to aviation fuels or gasoline. It can also be utilized in applications where coating, sealing, and bonding are necessary for fuel and /or solvent resistance. It has strong physical attributes which make it bond aggressively to most surfaces. 收起 | |
| R21-2615 | NuSil Silicone Technology 1 | R21-2615 is a high durometer silicone elastomer that is flowable and optically clear. This product can be used in any application that requires a high durometer, flowable material. It can be used to encapsulating and potting electronic devices and for mak...展开 R21-2615 is a high durometer silicone elastomer that is flowable and optically clear. This product can be used in any application that requires a high durometer, flowable material. It can be used to encapsulating and potting electronic devices and for making molded parts. 收起 | |
| R3-1075 | NuSil Silicone Technology 1 | R3-1075 is a one part, RTV silicone dispersion that has a non-corrosive cure. This product can be used as a protective coating that will prevent erosion and corrosion of various parts and surfaces in rockets, missiles, aircraft and launch equipment. It ca...展开 R3-1075 is a one part, RTV silicone dispersion that has a non-corrosive cure. This product can be used as a protective coating that will prevent erosion and corrosion of various parts and surfaces in rockets, missiles, aircraft and launch equipment. It can also be utilized as a conformal coating for electrical and electronic components including rigid and flexible printed circuit boards. 收起 | |
| R3-2160 | NuSil Silicone Technology 1 | R3-2160 is a two-part, pourable silicone system that has a high tear strength and good physical properties. It is designed for enhance performance in extreme high and low temperatures. The ideal use for this high temperature adhesive/sealant is for pottin...展开 R3-2160 is a two-part, pourable silicone system that has a high tear strength and good physical properties. It is designed for enhance performance in extreme high and low temperatures. The ideal use for this high temperature adhesive/sealant is for potting connectors, seals and gaskets, molded high voltage terminals, and cable harness breakouts. 收起 | |
| R3-3930-11 | NuSil Silicone Technology 1 | R3-3930-11 is a gray, two-part, RTV silicone that can be further dispersed for spraying applications. It has strong physical attributes which make it bond aggressively to most surfaces. It can also be utilized in applications where coating, sealing, and ...展开 R3-3930-11 is a gray, two-part, RTV silicone that can be further dispersed for spraying applications. It has strong physical attributes which make it bond aggressively to most surfaces. It can also be utilized in applications where coating, sealing, and bonding are necessary for fuel and /or solvent resistance.This product can be used to bond or protect hardware components that are exposed to gasoline or aviation fuels. 收起 | |
| R31-2186 | NuSil Silicone Technology 1 | R31-2186 is a translucent, thixotropic, silicone adhesive that has a high tear strength and cures at room temperature, and rapidly with the addition of heat. The consistency of this product allows it to be supplied in easy-to-use, airless side-by-side kit...展开 R31-2186 is a translucent, thixotropic, silicone adhesive that has a high tear strength and cures at room temperature, and rapidly with the addition of heat. The consistency of this product allows it to be supplied in easy-to-use, airless side-by-side kits that remove the need to mix. It can be used as an adhesive for sealing and bonding silicones to each other and other substrates such as plastics and metals. 收起 | |
| R32-2186 | NuSil Silicone Technology 1 | R32-2186 is a two-part, translucent, thixotropic, high tear strength silicone adhesive that cures rapidly with the application of heat in an oven, or by a heat gun or lamp. It does not require atmospheric moisture to cure. This adhesive can be used for bo...展开 R32-2186 is a two-part, translucent, thixotropic, high tear strength silicone adhesive that cures rapidly with the application of heat in an oven, or by a heat gun or lamp. It does not require atmospheric moisture to cure. This adhesive can be used for bonding and sealing silicones to each other and other substrates such as metals and plastics. This product is ready for rapid production or prototyping due to its rapid cure rate. 收起 | |
| R33-2186 | NuSil Silicone Technology 1 | R33-2183 is a fast-curing silicone adhesive that cures at room temperature, or rapidly with the use of heat in an oven, or a heat gun lamp. It does not require atmospheric moisture to cure. This product can be used as an adhesive for sealing and bonding s...展开 R33-2183 is a fast-curing silicone adhesive that cures at room temperature, or rapidly with the use of heat in an oven, or a heat gun lamp. It does not require atmospheric moisture to cure. This product can be used as an adhesive for sealing and bonding silicones to each other and other substrates such as metals and plastics. It is best used for applications requiring an operating temperature range of –65°C to 240°C (-85 to 465°F). 收起 | |
| R4-1140 | NuSil Silicone Technology 1 | R4-1140 is a one-part, self leveling, solvent-free silicone adhesive that cures at room temperature upon exposure to atmospheric moisture. This product bonds aggressively to many surfaces including ceramics, metals, glass, synthetic and natural fibers, wo...展开 R4-1140 is a one-part, self leveling, solvent-free silicone adhesive that cures at room temperature upon exposure to atmospheric moisture. This product bonds aggressively to many surfaces including ceramics, metals, glass, synthetic and natural fibers, wood, painted surfaces, many plastics and other silicone rubbers. 收起 | |
| R7-3521-11 | NuSil Silicone Technology 1 | R7-3521-11 is a dark grey, 50 mole % fluorosilicone elastomer that can be cured with heat in an oven or heat lamp, and can also be cured at room temperature. This product has a 1:1 Mix Ratio (Part A:B). It can be used for molding parts such as seals, stop...展开 R7-3521-11 is a dark grey, 50 mole % fluorosilicone elastomer that can be cured with heat in an oven or heat lamp, and can also be cured at room temperature. This product has a 1:1 Mix Ratio (Part A:B). It can be used for molding parts such as seals, stoppers, and O-rings. It can also be used for applications that require a good solvent resistance. 收起 | |
| RC 8 | CINKARNA | RC 8 is a milled, rutile titanium dioxide pigment. This product has not been micronized, but has been lattice-stabilized with aluminum compounds. It can be used in road-marking paints. | |
| RC 813 | CINKARNA | RC 813 is a micronized, rutile titanium dioxide pigment. This product has been lattice-stabilized with alumina and surface-treated with aluminum compounds. It can be used in industrial and decorative coatings, radiator paints, domestic appliance finishe...展开 RC 813 is a micronized, rutile titanium dioxide pigment. This product has been lattice-stabilized with alumina and surface-treated with aluminum compounds. It can be used in industrial and decorative coatings, radiator paints, domestic appliance finishes, package lacquers, and printing inks. 收起 | |
| RC 82 | CINKARNA | RC 82 is a micronized, rutile titanium dioxide pigment. This product has been lattice-stabilized with alumina and surface-treated with aluminum and silicon compounds. It can be used in dispersion paints, industrial, decorative and wallpaper coatings, pl...展开 RC 82 is a micronized, rutile titanium dioxide pigment. This product has been lattice-stabilized with alumina and surface-treated with aluminum and silicon compounds. It can be used in dispersion paints, industrial, decorative and wallpaper coatings, plaster paints, and powder coatings, among other applications. 收起 | |
| RC 823 | CINKARNA | RC 823 is a micronized, rutile titanium dioxide pigment. This product has been lattice-stabilized with alumina and surface-treated with aluminum and silicon compounds. It can be used in dispersion paints, industrial and decorative coatings, package lacq...展开 RC 823 is a micronized, rutile titanium dioxide pigment. This product has been lattice-stabilized with alumina and surface-treated with aluminum and silicon compounds. It can be used in dispersion paints, industrial and decorative coatings, package lacquers, and powder coatings, among other applications. 收起 | |
| RC 833 | CINKARNA | RC 833 is a micronized, rutile titanium dioxide pigment. This product has been lattice-stabilized with alumina and surface-treated with aluminum and zirconium compounds. It can be used in dispersion paints, industrial and decorative coatings, powder coa...展开 RC 833 is a micronized, rutile titanium dioxide pigment. This product has been lattice-stabilized with alumina and surface-treated with aluminum and zirconium compounds. It can be used in dispersion paints, industrial and decorative coatings, powder coatings, plaster paints, and printing inks. 收起 | |
| RC 84 | CINKARNA | RC 84 is a micronized, rutile titanium dioxide pigment. This product has been lattice-stabilized with alumina and surface treated with aluminum and silicon compounds. It can be used in dispersion paints, wallpaper coatings, mastics and sealants, plaster...展开 RC 84 is a micronized, rutile titanium dioxide pigment. This product has been lattice-stabilized with alumina and surface treated with aluminum and silicon compounds. It can be used in dispersion paints, wallpaper coatings, mastics and sealants, plaster and silicon paints. 收起 | |
| RC 86 | CINKARNA | RC 86 is a micronized, rutile titanium dioxide pigment. This product has been lattice-stabilized with alumina and surface treated with aluminum and silicon compounds. It can be used in dispersion paints, aqueous and solvent flat paints, paper and wallpa...展开 RC 86 is a micronized, rutile titanium dioxide pigment. This product has been lattice-stabilized with alumina and surface treated with aluminum and silicon compounds. It can be used in dispersion paints, aqueous and solvent flat paints, paper and wallpaper coatings, and silicon paints. 收起 | |
| SCV-2585 | NuSil Silicone Technology 1 | SCV-2585 is a silicone elastomer that features Ultra Low OutgassingTM and also has a high tear strength. This makes it an ideal product to provide protection to electronic components against shock, vibration, moisture, dust and other environmental hazards...展开 SCV-2585 is a silicone elastomer that features Ultra Low OutgassingTM and also has a high tear strength. This makes it an ideal product to provide protection to electronic components against shock, vibration, moisture, dust and other environmental hazards. It can also perform under a broad temperature range for electronic and space applications. 收起 | |
| SCV-2586 | NuSil Silicone Technology 1 | SCV-2586 a potting and encapsulated silicone elastomer that features Ultra Low OutgassingTM. It can be applied to provide radiation resistance, thermal and oxidation stability. This product is especially useful to bond solar cells to solar array panels an...展开 SCV-2586 a potting and encapsulated silicone elastomer that features Ultra Low OutgassingTM. It can be applied to provide radiation resistance, thermal and oxidation stability. This product is especially useful to bond solar cells to solar array panels and for applications that require a product with minimal volatility. 收起 | |
| SCV-2590 | NuSil Silicone Technology 1 | SCV-2590 is a two-part, clear silicone elastomer that can be used as an adhesive in low strength applications such as solar cell arrays where clarity, and a low volatility are needed. In electronic and space applications it can prevent condensation from b...展开 SCV-2590 is a two-part, clear silicone elastomer that can be used as an adhesive in low strength applications such as solar cell arrays where clarity, and a low volatility are needed. In electronic and space applications it can prevent condensation from building in sensitive devices. This product also features Ultra Low OutgassingTM which exceeds specifications outlined in NASA and the European Space Agency. 收起 | |
| SCV-2590-2 | NuSil Silicone Technology 1 | SCV-2590-2 is a black silicone that has low viscosity and can be utilized as an adhesive in optical applications requiring a black material to block light. This product offers a broad operating temperature range and can be used to protect electronic assem...展开 SCV-2590-2 is a black silicone that has low viscosity and can be utilized as an adhesive in optical applications requiring a black material to block light. This product offers a broad operating temperature range and can be used to protect electronic assemblies from extreme temperatures, humidity and radiation. It also features Ultra Low OutgassingTM which makes it ideal to protect sensitive devices from condensation. 收起 | |
| SCV-2596 | NuSil Silicone Technology 1 | SCV-2596 is a two-part, black electrically conductive RTV silicone that can be used for RFI and EMI shielding in electronic and space applications. This product can be used to adhere covers onto housing or for any application where grooves and other confi...展开 SCV-2596 is a two-part, black electrically conductive RTV silicone that can be used for RFI and EMI shielding in electronic and space applications. This product can be used to adhere covers onto housing or for any application where grooves and other configurations require a flowable to limited flow material. It features Ultra Low OutgassingTM which helps it perform under extreme operating conditions and helps avoid condensation in sensitive devices. 收起 | |
| SCV1-2590 | NuSil Silicone Technology 1 | SCV1-2590 is an optically clear silicone system with low viscosity and is a suitable adhesive in applications such as solar cell arrays, where clarity and low volatility are important. It can also be used in space and electric applications that require lo...展开 SCV1-2590 is an optically clear silicone system with low viscosity and is a suitable adhesive in applications such as solar cell arrays, where clarity and low volatility are important. It can also be used in space and electric applications that require low outgassing to avoid condensation in sensitive devices. 收起 | |
| SCV1-2596 | NuSil Silicone Technology 1 | SCV1-2596 is an electrically conductive silicone adhesive/sealant that features Ultra Low OutgassingTM. It can be utilized in applications that require minimal volatile condensables under extreme operating conditions. This product can also be used for RFI...展开 SCV1-2596 is an electrically conductive silicone adhesive/sealant that features Ultra Low OutgassingTM. It can be utilized in applications that require minimal volatile condensables under extreme operating conditions. This product can also be used for RFI and EMI shielding in electrical and space applications and is well suited to for form-in-place conductive gaskets. 收起 | |
| SCV1-2599 | NuSil Silicone Technology 1 | SCV1-2599 is a two-part, white, thermally conductive silicone that cures with the addition of heat. It provides heat transfer between electrical/electronic components and their heat sinks. This product can be used to adhere integrated circuit substrates, ...展开 SCV1-2599 is a two-part, white, thermally conductive silicone that cures with the addition of heat. It provides heat transfer between electrical/electronic components and their heat sinks. This product can be used to adhere integrated circuit substrates, base plates, heat sinks or where grooves require a non-flowable to limited flow material. 收起 | |
| SCV2-2590 | NuSil Silicone Technology 1 | SCV2-2590 is a clear silicone that features Ultra Low OutgassingTM and has a low viscosity. It exceeds low outgas specifications outlined in NASA and the European Space Agency. This product can act as an embedding compound for environmental protection of ...展开 SCV2-2590 is a clear silicone that features Ultra Low OutgassingTM and has a low viscosity. It exceeds low outgas specifications outlined in NASA and the European Space Agency. This product can act as an embedding compound for environmental protection of electronic components. It will protect against extreme temperatures, humidity, radiation, thermal and mechanical stress. 收起 | |
| SCV2-2599 | NuSil Silicone Technology 1 | SCV2-2599 is a thixotropic, thermally conductive silicone that is designed to allow bond line thicknesses of < or = 50 microns. This product cures with the addition of heat and provides heat transfer between electrical/electronic components and their heat...展开 SCV2-2599 is a thixotropic, thermally conductive silicone that is designed to allow bond line thicknesses of < or = 50 microns. This product cures with the addition of heat and provides heat transfer between electrical/electronic components and their heat sinks. It can also be used as an adhesive for base plates, integrated circuit substrates, heat sinks or where grooves require a non-flow material. 收起 | |
| SFM5-2350 | NuSil Silicone Technology 1 | SFM5-2350 is a flame retardant, RTV silicone foam that yields a medium density. It can be utilized as a flame retardant seal and for intricate back-filling due to a low viscosity and longer work time. This product can also be utilized in shock and vibrati...展开 SFM5-2350 is a flame retardant, RTV silicone foam that yields a medium density. It can be utilized as a flame retardant seal and for intricate back-filling due to a low viscosity and longer work time. This product can also be utilized in shock and vibration dampening situations that require a lightweight, flexible foam, and provides excellent thermal insulation and radiation resistance. It is useful where stability at higher and lower temperatures is required. 收起 | |
| SP-120 | NuSil Silicone Technology 1 | SP-120 is a silicone primer that is formulated for use with one and two-part RTV systems, and does not need mixing.The translucent color of SP-120 helps to preserve visibility with other translucent products. This primer will also improve the adhesion of ...展开 SP-120 is a silicone primer that is formulated for use with one and two-part RTV systems, and does not need mixing.The translucent color of SP-120 helps to preserve visibility with other translucent products. This primer will also improve the adhesion of the RTV systems to other substrates such as metals, ceramics, glass, and wood. 收起 | |
| SP-121 | NuSil Silicone Technology 1 | SP-121 is a specially formulated silicone primer that is designed to be used with one and two-part RTV systems. This primer is red in color and provides an easy visual determination of surface coverage when using it. It will also improve the adhesion of t...展开 SP-121 is a specially formulated silicone primer that is designed to be used with one and two-part RTV systems. This primer is red in color and provides an easy visual determination of surface coverage when using it. It will also improve the adhesion of the RTV systems to various substrates such as glass, metals, rigid plastics, and ceramics. 收起 | |
| SP-124 | NuSil Silicone Technology 1 | SP-124 is a silicone primer that is designed for use with condensation cured systems where conventional silicone primers are ineffective. This product will help to improve the adhesion of one and two-part condensation cured systems to various substrates s...展开 SP-124 is a silicone primer that is designed for use with condensation cured systems where conventional silicone primers are ineffective. This product will help to improve the adhesion of one and two-part condensation cured systems to various substrates such as glass, ceramics, metal, rigid plastics, wood and some composites. It can be applied by wiping, brushing or dipping a uniform thin film onto the substrates. 收起 | |
| SP-142 | NuSil Silicone Technology 1 | SP-142 is a translucent silicone primer that is specially designed to be used with platinum-cured systems on polycarbonates. This one-component primer is supplied in VM&P Naphtha and requires no mixing. When brushed, wiped, or dipped on a polycarbonate, i...展开 SP-142 is a translucent silicone primer that is specially designed to be used with platinum-cured systems on polycarbonates. This one-component primer is supplied in VM&P Naphtha and requires no mixing. When brushed, wiped, or dipped on a polycarbonate, it will help improve the adhesion with addition-cured systems. 收起 | |
| SP-270 | NuSil Silicone Technology 1 | SP-270 is a silicone primer that was specifically designed for use with platinum-cured systems where other conventional primers are insufficient. It is a one-component primer supplied in VM&P Naphtha so it requires no mixing at all. When applied to additi...展开 SP-270 is a silicone primer that was specifically designed for use with platinum-cured systems where other conventional primers are insufficient. It is a one-component primer supplied in VM&P Naphtha so it requires no mixing at all. When applied to addition-cured systems with iridite coated materials, it will improve the adhesion. This also holds true with other substrates including glass, metals, some plastics and other silicone materials. 收起 | |
| SP-271 | NuSil Silicone Technology 1 | SP-271 is a one component primer that is supplied in VM&P Naphtha and it requires no mixing. It is designed specifically to be used with platinum catalyzed, addition cured systems. This product can help improve the adhesion of platinum catalyzed, addition...展开 SP-271 is a one component primer that is supplied in VM&P Naphtha and it requires no mixing. It is designed specifically to be used with platinum catalyzed, addition cured systems. This product can help improve the adhesion of platinum catalyzed, addition cured systems to polymethylmethacrylate (PMMA) as well as other various substrates such as glass, metals, ceramics, other silicone materials, and some plastics. 收起 | |
| SP1-204 | NuSil Silicone Technology 1 | SP1-204 is a specially formulated translucent primer that is designed for use with one and two-part RTV systemts. This primer requires no mixing and air dries. It is an ideal product to help improve the adhesion of one and two-part systems to various subs...展开 SP1-204 is a specially formulated translucent primer that is designed for use with one and two-part RTV systemts. This primer requires no mixing and air dries. It is an ideal product to help improve the adhesion of one and two-part systems to various substrates such as glass, metals, plastics, ceramics and wood. 收起 | |
| Spicosolv-M | Manali Petrochemical Ltd. | Spicosolv-M is a clear, colorless to pale yellow liquid propylene glycol mono methyl ether. This eco-friendly highly active solvent used for dissolving a variety of resins, oils, dyes and waxes as well as a coalescing agent in solvent and water-based syst...展开 Spicosolv-M is a clear, colorless to pale yellow liquid propylene glycol mono methyl ether. This eco-friendly highly active solvent used for dissolving a variety of resins, oils, dyes and waxes as well as a coalescing agent in solvent and water-based systems. It can be applied to paint varnish and printing ink. 收起 | |
| SUNMUN NV6600 | Suzhou Sunmun Technology Co., Ltd. | SUNMUN NV6600 is a white water based colorant with a density of 2.08 that is designed for emulsion paint. This product is environmentally friendly, has a high content of pigment, strong color strength, and good color dispersion. | |
| SUNMUN NV6800 | Suzhou Sunmun Technology Co., Ltd. | SUNMUN NV6800 is a carbon black water based colorant with a density of 1.24 that is designed for emulsion paint. This product is environmentally friendly, has a high content of pigment, strong color strength, and good color dispersion. | |
| SUNMUN NV6805 | Suzhou Sunmun Technology Co., Ltd. | SUNMUN NV6805 is a phthalo blue water based colorant with a density of 1.24 that is designed for emulsion paint. This product is environmentally friendly, has a high content of pigment, strong color strength, and good color dispersion. | |
| SUNMUN NV6806 | Suzhou Sunmun Technology Co., Ltd. | SUNMUN NV6806 is a phthalo green water based colorant with a density of 1.3 that is designed for emulsion paint. This product is environmentally friendly, has a high content of pigment, strong color strength, and good color dispersion. | |
| SUNMUN NV8810 | Suzhou Sunmun Technology Co., Ltd. | SUNMUN NV8810 is an iron yellow water based colorant with a density of 1.82 that is designed for emulsion paint. This product is environmentally friendly, has a high content of pigment, strong color strength, and good color dispersion. | |
| SUNMUN NV8811 | Suzhou Sunmun Technology Co., Ltd. | SUNMUN NV8811 is an iron red water based colorant with a density of 2.2 that is designed for emulsion paint. This product is environmentally friendly, has a high content of pigment, strong color strength, and good color dispersion. | |
| SUNMUN NV9802 | Suzhou Sunmun Technology Co., Ltd. | SUNMUN NV9802 is a DPP orange water based colorant with a density of 1.18 that is designed for emulsion paint. This product is environmentally friendly, has a high content of pigment, strong color strength, and good color dispersion. | |
| SUNMUN NV9803 | Suzhou Sunmun Technology Co., Ltd. | SUNMUN NV9803 is a violet water based colorant with a density of 1.16 that is designed for emulsion paint. This product is environmentally friendly, has a high content of pigment, strong color strength, and good color dispersion. | |
| SUNMUN NV9806 | Suzhou Sunmun Technology Co., Ltd. | SUNMUN NV9806 is a yellow water based colorant with a density of 1.2 that is designed for emulsion paint. This product is environmentally friendly, has a high content of pigment, strong color strength, and good color dispersion. | |
| SUNMUN NV9808 | Suzhou Sunmun Technology Co., Ltd. | SUNMUN NV9808 is a yellow water based colorant with a density of 1.2 that is designed for emulsion paint. This product is environmentally friendly, has a high content of pigment, strong color strength, and good color dispersion. | |
| SUNMUN NV9809 | Suzhou Sunmun Technology Co., Ltd. | SUNMUN NV9809 is a magenta based colorant with a density of 1.12 that is designed for emulsion paint. This product is environmentally friendly, has a high content of pigment, strong color strength, and good color dispersion. | |
| SUNMUN NV9811 | Suzhou Sunmun Technology Co., Ltd. | SUNMUN NV9811 is a red water based colorant with a density of 1.18 that is designed for emulsion paint. This product is environmentally friendly, has a high content of pigment, strong color strength, and good color dispersion. | |
| SUNMUN NV9812 | Suzhou Sunmun Technology Co., Ltd. | SUNMUN NV9812 is an orange water based colorant with a density of 1.19 that is designed for emulsion paint. This product is environmentally friendly, has a high content of pigment, strong color strength, and good color dispersion. | |
| SUNMUN NV9814 | Suzhou Sunmun Technology Co., Ltd. | SUNMUN NV9814 is a yellow water based colorant with a density of 1.15 that is designed for emulsion paint. This product is environmentally friendly, has a high content of pigment, strong color strength, and good color dispersion. | |
| SUNMUN NV9815 | Suzhou Sunmun Technology Co., Ltd. | SUNMUN NV9815 is a red water based colorant with a density of 1.23 that is designed for emulsion paint. This product is environmentally friendly, has a high content of pigment, strong color strength, and good color dispersion. | |
| SUNMUN NV9815R | Suzhou Sunmun Technology Co., Ltd. | SUNMUN NV9815R is a red water based colorant with a density of 1.17 that is designed for emulsion paint. This product is environmentally friendly, has a high content of pigment, strong color strength, and good color dispersion. | |
| SUNMUN NV9816 | Suzhou Sunmun Technology Co., Ltd. | SUNMUN NV9816 is a yellow water based colorant with a density of 1.18 that is designed for emulsion paint. This product is environmentally friendly, has a high content of pigment, strong color strength, and good color dispersion. | |
| SUNMUN SM6800 | Suzhou Sunmun Technology Co., Ltd. | SUNMUN SM6800 is a carbon black water based colorant with a density of 1.23 that is designed for emulsion paint. This product has a high content of pigment, strong color strength, and good color dispersion. | |
| SUNMUN SM6804 | Suzhou Sunmun Technology Co., Ltd. | SUNMUN SM6804 is a phthalo blue water based colorant with a density of 1.23 that is designed for emulsion paint. This product has a high content of pigment, strong color strength, and good color dispersion. | |
| SUNMUN SM6805 | Suzhou Sunmun Technology Co., Ltd. | SUNMUN SM6805 is a phthalo blue water based colorant with a density of 1.23 that is designed for emulsion paint. This product has a high content of pigment, strong color strength, and good color dispersion. | |
| SUNMUN SM6806 | Suzhou Sunmun Technology Co., Ltd. | SUNMUN SM6806 is a phthalo green water based colorant with a density of 1.3 that is designed for emulsion paint. This product has a high content of pigment, strong color strength, and good color dispersion. | |
| SUNMUN SM8805 | Suzhou Sunmun Technology Co., Ltd. | SUNMUN SM8805 is an iron red water based colorant with a density of 2.2 that is designed for emulsion paint. This product has a high content of pigment, strong color strength, and good color dispersion. | |
| SUNMUN SM8809 | Suzhou Sunmun Technology Co., Ltd. | SUNMUN SM8809 is an iron black water based colorant with a density of 1.9 that is designed for emulsion paint. This product has a high content of pigment, strong color strength, and good color dispersion. | |
| SUNMUN SM8810 | Suzhou Sunmun Technology Co., Ltd. | SUNMUN SM8810 is an iron yellow water based colorant with a density of 1.8 that is designed for emulsion paint. This product has a high content of pigment, strong color strength, and good color dispersion. | |
| SUNMUN SM8811 | Suzhou Sunmun Technology Co., Ltd. | SUNMUN SM8811 is an iron red water based colorant with a density of 2.2 that is designed for emulsion paint. This product has a high content of pigment, strong color strength, and good color dispersion. | |
| SUNMUN SM9802 | Suzhou Sunmun Technology Co., Ltd. | SUNMUN SM9802 is an orange water based colorant with a density of 1.1 that is designed for emulsion paint. This product has a high content of pigment, strong color strength, and good color dispersion. | |
| SUNMUN SM9803 | Suzhou Sunmun Technology Co., Ltd. | SUNMUN SM9803 is a violet water based colorant with a density of 1.15 that is designed for emulsion paint. This product has a high content of pigment, strong color strength, and good color dispersion. | |
| SUNMUN SM9805 | Suzhou Sunmun Technology Co., Ltd. | SUNMUN SM9805 is a yellow water based colorant with a density of 1.16 that is designed for emulsion paint. This product has a high content of pigment, strong color strength, and good color dispersion. | |
| SUNMUN SM9806 | Suzhou Sunmun Technology Co., Ltd. | SUNMUN SM9806 is a yellow water based colorant with a density of 1.1 that is designed for emulsion paint. This product has a high content of pigment, strong color strength, and good color dispersion. | |
| SUNMUN SM9807 | Suzhou Sunmun Technology Co., Ltd. | SUNMUN SM9807 is a red water based colorant with a density of 1.1 that is designed for emulsion paint. This product has a high content of pigment, strong color strength, and good color dispersion. | |
| SUNMUN SM9809 | Suzhou Sunmun Technology Co., Ltd. | SUNMUN SM9809 is a magenta water based colorant with a density of 1.1 that is designed for emulsion paint. This product has a high content of pigment, strong color strength, and good color dispersion. | |
| SUNMUN SM9811 | Suzhou Sunmun Technology Co., Ltd. | SUNMUN SM9811 is a red water based colorant with a density of 1.15 that is designed for emulsion paint. This product has a high content of pigment, strong color strength, and good color dispersion. | |
| SUNMUN SM9812 | Suzhou Sunmun Technology Co., Ltd. | SUNMUN SM9812 is an orange water based colorant with a density of 1.15 that is designed for emulsion paint. This product has a high content of pigment, strong color strength, and good color dispersion. | |
| SUNMUN SM9814 | Suzhou Sunmun Technology Co., Ltd. | SUNMUN SM9814 is a yellow water based colorant with a density of 1.1 that is designed for emulsion paint. This product has a high content of pigment, strong color strength, and good color dispersion. | |
| SUNMUN SM9814Y | Suzhou Sunmun Technology Co., Ltd. | SUNMUN SM9814Y is a yellow water based colorant with a density of 1.1 that is designed for emulsion paint. This product has a high content of pigment, strong color strength, and good color dispersion. | |
| SUNMUN SM9815 | Suzhou Sunmun Technology Co., Ltd. | SUNMUN SM9815 is a red water based colorant with a density of 1.15 that is designed for emulsion paint. This product has a high content of pigment, strong color strength, and good color dispersion. | |
| SUNMUN TP 070 | Suzhou Sunmun Technology Co., Ltd. | SUNMUN TP 070 is a black F water based colorant in the Le Coloring pigment pastes for textile printing and dyeing. This product is environmentally friendly, has high stability, and strong tinting strength. | |
| SUNMUN TP 071 | Suzhou Sunmun Technology Co., Ltd. | SUNMUN TP 071 is a red water based colorant in the Le Coloring pigment pastes for textile printing and dyeing. This product is environmentally friendly, has high stability, and strong tinting strength. | |
| SUNMUN TP 072 | Suzhou Sunmun Technology Co., Ltd. | SUNMUN TP 072 is a light yellow water based colorant in the Le Coloring pigment pastes for textile printing and dyeing. This product is environmentally friendly, has high stability, and strong tinting strength. | |
| SUNMUN TP 073 | Suzhou Sunmun Technology Co., Ltd. | SUNMUN TP 073 is a sapphire blue water based colorant in the Le Coloring pigment pastes for textile printing and dyeing. This product is environmentally friendly, has high stability, and strong tinting strength. | |
| SUNMUN TP 074 | Suzhou Sunmun Technology Co., Ltd. | SUNMUN TP 074 is a green F water based colorant in the Le Coloring pigment pastes for textile printing and dyeing. This product is environmentally friendly, has high stability, and strong tinting strength. | |
| SUNMUN TP 075 | Suzhou Sunmun Technology Co., Ltd. | SUNMUN TP 075 is a violet water based colorant in the Le Coloring pigment pastes for textile printing and dyeing. This product is environmentally friendly, has high stability, and strong tinting strength. | |
| SUNMUN TP 076 | Suzhou Sunmun Technology Co., Ltd. | SUNMUN TP 076 is an orange water based colorant in the Le Coloring pigment pastes for textile printing and dyeing. This product is environmentally friendly, has high stability, and strong tinting strength. |
