| ACRIBEN RF 450 | Benasedo | ACRIBEN RF 450 is a low hydroxyl content binder suitable to be crosslinked both with aliphatic and aromatic isocyanates, when producing enamels for metals or for plastic substrates, to be cured at room temperature or in the oven. | |
| ACRIBEN SA 338 | Benasedo | ACRIBEN SA 338 is a self crosslinking acrylic polymer endowed with very good transparency, good chemical resistance, and non-yellowing properties. It is suitable to formulate fast drying clear and pigmented water based top-coats for furniture. | |
| ACRIBEN SA 437 | Benasedo | ACRIBEN SA 437 is a self crosslinking acrylic polymer. It is suitable to formulate fast drying clear and pigmented water based sealers for furniture. | |
| ACRIBEN SA 5302 | Benasedo | ACRIBEN SA 5302 is a self crosslinking acrylic polymer endowed with high blocking resistance, good early water resistance, good alkaline resistance, very good transparency, and non yellowing properties. It is suitable to formulate clear and pigmented fast...展开 ACRIBEN SA 5302 is a self crosslinking acrylic polymer endowed with high blocking resistance, good early water resistance, good alkaline resistance, very good transparency, and non yellowing properties. It is suitable to formulate clear and pigmented fast drying and fast blocking resistant coatings for Joinery, suitable both for interior and exterior applications. 收起 | |
| BENALAC 5660 | Benasedo | BENALAC 5660 is an air-dryng long-oil alkyd resin specially designed for “off-set inks”. It is endowed with good setting and drying characteristics, excellent wetting power, colour development and scuff resistance, flow and non- yellowing properties. | |
| BENALAC UR 81 | Benasedo | BENALAC UR 81 is a solventless aromatic urethane modified oil endowed with fast air drying properties, hardness and gloss. It finds applications as a vehicle in “off set“ inks by reducing the tack-free time and improving levelling and rub test resistance....展开 BENALAC UR 81 is a solventless aromatic urethane modified oil endowed with fast air drying properties, hardness and gloss. It finds applications as a vehicle in “off set“ inks by reducing the tack-free time and improving levelling and rub test resistance. Due to its excellent pigments wetting properties is particularly suitable as grinding vehicle. It is also suitable for interior and exterior clear varnishes and for wood stains in compliance with CE 2004 – 42 requirements for the VOC reduction. 收起 | |
| Benasol 1804 | Benasedo | Benasol 1804 is a Linseed - Tung Phenolic oil, with a 68% oil content. It contains 70% solids, Z1-Z2 visc. [G.H], 6-12 A.V. solids, and a 9 color [G.H.] max. It is used in anticorrosive primers, enamels and clear finishes with excellent resistance to mari...展开 Benasol 1804 is a Linseed - Tung Phenolic oil, with a 68% oil content. It contains 70% solids, Z1-Z2 visc. [G.H], 6-12 A.V. solids, and a 9 color [G.H.] max. It is used in anticorrosive primers, enamels and clear finishes with excellent resistance to marine corrosion. 收起 | |
| BENASOL 4377 | Benasedo | BENASOL 4377 is a low viscosity, plasticizing, non yellowing alkyd resin suitable to produce nitrocellulose wood lacquers, endowed with very fast solvent release, high build-up flow, gloss and lifting resistance. | |
| Benasol 4V | Benasedo | Benasol 4V is a very fast air drying alkyd resin phenolic modified having good through dry. It is especially recommended for rust-inhibitive metal and nitrocellulose non lifting primers, fast air–drying enamels for farm and industrial equipment. | |
| Benasol 5097 in White Spirit | Benasedo | Benasol 5097 in White Spirit is used in quick air-drying primers and enamels with excellent chemical and outdoor resistance. It is made from Linseed - Tung Phenolic oil and has an oil content of 42%. This product contains 50% solids, a viscosity [G.H.] of...展开 Benasol 5097 in White Spirit is used in quick air-drying primers and enamels with excellent chemical and outdoor resistance. It is made from Linseed - Tung Phenolic oil and has an oil content of 42%. This product contains 50% solids, a viscosity [G.H.] of X-Z, an A.V. solids amount of 6-15, and a color [G.H] max. of 9. Its application is for air. 收起 | |
| Benasol 5097 in Xylene | Benasedo | Benasol 5097 in Xylene is used in quick air-drying primers and enamels with excellent chemical and outdoor resistance. This product has an oil content of 42%, a solids amount of 50%, an A.V. solids amount of 6-15, and a viscosity [G.H.] of U-W. Its applic...展开 Benasol 5097 in Xylene is used in quick air-drying primers and enamels with excellent chemical and outdoor resistance. This product has an oil content of 42%, a solids amount of 50%, an A.V. solids amount of 6-15, and a viscosity [G.H.] of U-W. Its application is for air. 收起 | |
| BENASOL A 240 | Benasedo | BENASOL A 240 is a very fast curing binder suitable for two pack wood lacquers, sealers and top coats, where it shows good sandability hardness and filling properties. It has excellent lifting resistance and good compatibility with nitrocellulose. | |
| Benasol AS 280 | Benasedo | Benasol AS 280 is used in fast air-drying and low-bake enamels with excellent chemical resistance. It is made from soya oil and has a 28% oil content. It contains 60% solids, has a viscosity [G.H.] of Y-Z1, an A.V. solids amount of 6-15, and a colour [G.H...展开 Benasol AS 280 is used in fast air-drying and low-bake enamels with excellent chemical resistance. It is made from soya oil and has a 28% oil content. It contains 60% solids, has a viscosity [G.H.] of Y-Z1, an A.V. solids amount of 6-15, and a colour [G.H.] maximum of 5. This product has applications for air, bake, nitro and catalyze. 收起 | |
| BENASOL AS 308 in XYLENE | Benasedo | BENASOL AS 308 in XYLENE is a medium-oil non–yellowing alkyd resin having fast trough drying, good gloss, hardness, adhesion and outdoor resistance. It is suitable to produce enamels for building and industrial applications, also in combination with chlor...展开 BENASOL AS 308 in XYLENE is a medium-oil non–yellowing alkyd resin having fast trough drying, good gloss, hardness, adhesion and outdoor resistance. It is suitable to produce enamels for building and industrial applications, also in combination with chlorinated rubber, for farm machinery enamels, when sudden outdoor exposure is required. 收起 | |
| BENASOL AS 308 in XYLENE /WHITE SPIRIT (30/15) | Benasedo | BENASOL AS 308 in XYLENE /WHITE SPIRIT (30/15) is a medium-oil non–yellowing alkyd resin having fast trough drying, good gloss, hardness, adhesion and outdoor resistance. It is suitable to produce enamels for building and industrial applications, also in ...展开 BENASOL AS 308 in XYLENE /WHITE SPIRIT (30/15) is a medium-oil non–yellowing alkyd resin having fast trough drying, good gloss, hardness, adhesion and outdoor resistance. It is suitable to produce enamels for building and industrial applications, also in combination with chlorinated rubber, for farm machinery enamels, when sudden outdoor exposure is required. 收起 | |
| BENASOL AS 3716 | Benasedo | BENASOL AS 3716 is a non–yellowing alkyd resin having fast trough drying, good gloss, hardness, adhesion and outdoor resistance. It is suitable to produce high-solids enamels for building and industrial applications, also combining with chlorinated rubber...展开 BENASOL AS 3716 is a non–yellowing alkyd resin having fast trough drying, good gloss, hardness, adhesion and outdoor resistance. It is suitable to produce high-solids enamels for building and industrial applications, also combining with chlorinated rubber, for farm machinery enamels, when sudden outdoor exposure is required. 收起 | |
| Benasol AS 379 | Benasedo | Benasol AS 379 is used in fast air-drying white and coloured enamels for industrial applications. It is made from special fatty acids with 43% oil content and 60% solids content. This product has a viscosity [G.H.] of Z1-Z2, an A.V. solids amount of 6-12,...展开 Benasol AS 379 is used in fast air-drying white and coloured enamels for industrial applications. It is made from special fatty acids with 43% oil content and 60% solids content. This product has a viscosity [G.H.] of Z1-Z2, an A.V. solids amount of 6-12, and a color [G.H.] maximum of 5. It has application for air. 收起 | |
| BENASOL AS 452 | Benasedo | BENASOL AS 452 is an air-drying low-viscosity, non-yellowing alkyd resin especially modified so to guarantee very good wetting properties with pigments, fillers and wide compatibility with various binder types used in different formulations. | |
| BENASOL AS 453 | Benasedo | BENASOL AS 453 is an air-drying low-viscosity, non-yellowing alkyd resin especially modified so to guarantee very good wetting properties with pigments, fillers and wide compatibility with various binder types used in different formulations. | |
| Benasol B1 | Benasedo | Benasol B1 is used in urethane two-component mat finishes and sealers with high reactivity and easy sandability, and it has nitro and catalyze applications. This product contains vegetable fatty acids, with 30% oil content and a 50% solids amount. It has ...展开 Benasol B1 is used in urethane two-component mat finishes and sealers with high reactivity and easy sandability, and it has nitro and catalyze applications. This product contains vegetable fatty acids, with 30% oil content and a 50% solids amount. It has a viscosity [G.H.] of X-Y, an A.V. solids amount of 6-15, a color [G.H.] max. of 5, and an OH solids of 2.6-2.8%. 收起 | |
| Benasol C 300 | Benasedo | Benasol C 300 is used in non-yellowing baking enamels, polyurethane finishes and nitrocellulose lacquers. It contains coconut fatty acids, with a 33% oil content. This product has a 60% solids content, a viscosity [G.H.] of Z1-Z2, an A.V. solids amount of...展开 Benasol C 300 is used in non-yellowing baking enamels, polyurethane finishes and nitrocellulose lacquers. It contains coconut fatty acids, with a 33% oil content. This product has a 60% solids content, a viscosity [G.H.] of Z1-Z2, an A.V. solids amount of 6-15, and an OH solids of 2.8-3.0%. Benasol C 300 has bake, nitro and catalyze applications. 收起 | |
| BENASOL CO 34 | Benasedo | BENASOL CO 34 is an alkyd resin with a particular molecular structure,endowed with very fast drying properties, good performances in adhesion,hardness and through-dry. It is suggested to formulate industrial sealer and finishes, i.e. machinery,aerosol ena...展开 BENASOL CO 34 is an alkyd resin with a particular molecular structure,endowed with very fast drying properties, good performances in adhesion,hardness and through-dry. It is suggested to formulate industrial sealer and finishes, i.e. machinery,aerosol enamels,traffic-paints. 收起 | |
| Benasol CO 35 in Xylene | Benasedo | Benasol CO 35 in Xylene is used in very fast air-drying enamels for industrial applications and traffic-paints. It is made using soya fatty acids, with a 44% oil content. It has a viscosity [G.H.] of Z2-Z4, a 60% solids amount, an A.V. solids content of 6...展开 Benasol CO 35 in Xylene is used in very fast air-drying enamels for industrial applications and traffic-paints. It is made using soya fatty acids, with a 44% oil content. It has a viscosity [G.H.] of Z2-Z4, a 60% solids amount, an A.V. solids content of 6-15, and a colour [G.H.] of maximum 8. This product has air applications. 收起 | |
| Benasol CO 35 in Xylene/Butylacetate | Benasedo | Benasol CO 35 in Xylene/Butylacetate is used in very fast air-drying enamels for industrial applications and traffic-paints, and also has air applications. It is made using soya fatty acids, with a 44% oil content. It has a viscosity [G.H.] of Z2-Z3, a 65...展开 Benasol CO 35 in Xylene/Butylacetate is used in very fast air-drying enamels for industrial applications and traffic-paints, and also has air applications. It is made using soya fatty acids, with a 44% oil content. It has a viscosity [G.H.] of Z2-Z3, a 65% solids amount, an A.V. solids content of 6-15, and a colour [G.H.] of maximum 4. 收起 | |
| Benasol CO 37 in BUTYL ACETATE | Benasedo | Benasol CO 37 in BUTYL ACETATE is used in very fast non-yellowing air-drying enamels for exterior applications, particularly farm equipment. It is made using special fatty acids and Urethane Aliphatic, and has a 37% oil content. This product contains 65% ...展开 Benasol CO 37 in BUTYL ACETATE is used in very fast non-yellowing air-drying enamels for exterior applications, particularly farm equipment. It is made using special fatty acids and Urethane Aliphatic, and has a 37% oil content. This product contains 65% solids, a viscosity [G.H.] of Z1-Z2, an A.V. solids content of 5-12, and a color [G.H.] maximum of 4. This product has air applications. 收起 | |
| Benasol E 114 | Benasedo | Benasol E 114 is used in clear and pigmented finishes for metals and wood. It has a large compatibility with acrylics, polyesters, alkyds, film-forming vehicles and universal tinting-systems. It contains synthetic fatty acids, with a 25% oil amount. This ...展开 Benasol E 114 is used in clear and pigmented finishes for metals and wood. It has a large compatibility with acrylics, polyesters, alkyds, film-forming vehicles and universal tinting-systems. It contains synthetic fatty acids, with a 25% oil amount. This product has a viscosity [G.H.] of Z3-Z5, a colour max. of 3, an OH solids amount of 5.4-5.6, and solids amount of 75%. Benasol E 114 has bake, nitro, and catalyze applications. 收起 | |
| Benasol E 184 | Benasedo | Benasol E 184 is made using synthetic fatty acids, with an oil content of 28% and a solids amount of 70%. This product has a viscosity [G.H.] of Z1-Z3, an OH solids amount of 2.3-2.5, and a colour [G.H.] maximum of 3. It is used in non-yellowing nitrocell...展开 Benasol E 184 is made using synthetic fatty acids, with an oil content of 28% and a solids amount of 70%. This product has a viscosity [G.H.] of Z1-Z3, an OH solids amount of 2.3-2.5, and a colour [G.H.] maximum of 3. It is used in non-yellowing nitrocellulose lacquers for automotive finishes, bake and two-component polyurethane enamels. Benasol E 184 has bake, nitro and catalyze applications. 收起 | |
| Benasol F 71 | Benasedo | Benasol F 71 is used in two-component polyurethane gloss or mat finishes and sealers endowed with high transparence, and has catalyze applications. This product is made using hydrogenated castor oil and vegetable fatty acids, with an oil content of 41%. T...展开 Benasol F 71 is used in two-component polyurethane gloss or mat finishes and sealers endowed with high transparence, and has catalyze applications. This product is made using hydrogenated castor oil and vegetable fatty acids, with an oil content of 41%. This product has an OH solids amount of 4.4-4.6, an A.V. solids level of 15-20, a colour [G.H.] maximum of 4, and a viscosity of Z1-Z2. 收起 | |
| Benasol F 73 | Benasedo | Benasol F 73 is used in high-quality clear and pigmented polyurethane finishes for wood, and has catalyze applications. It uses hydrogenated castor oil, with a 43% oil and 60% solids content. This product has a 4.5-4.7% OH solids amount, a 15-23 A.V. soli...展开 Benasol F 73 is used in high-quality clear and pigmented polyurethane finishes for wood, and has catalyze applications. It uses hydrogenated castor oil, with a 43% oil and 60% solids content. This product has a 4.5-4.7% OH solids amount, a 15-23 A.V. solids level, and a Y-Z viscosity [G.H.]. 收起 | |
| BENASOL FL 34 | Benasedo | BENASOL FL 34 is a fast air drying long oil alkyd resin, modified with aromatic isocyanate, having a pale colour and giving hard and tough films. It is suggested for clear and pigmented finishes with high gloss, high body, excellent brushability and dryin...展开 BENASOL FL 34 is a fast air drying long oil alkyd resin, modified with aromatic isocyanate, having a pale colour and giving hard and tough films. It is suggested for clear and pigmented finishes with high gloss, high body, excellent brushability and drying. It is employed for silk – glossy paints or flat one-coat wall finishes, pigmented sealers for wood and primers endowed with easy sanding properties and applied by brush or roll. Wide compatibility with medium-long-oil alkyd resins. 收起 | |
| BENASOL FL 40 | Benasedo | BENASOL FL 40 is a non yellowing, slightly thixotropic high-molecular weight alkyd resin, endowed with very good flow, fast drying and wide compatibility with medium-long-oil alkyd resins. In combination with medium-oil alkyd resins, is suitable for seale...展开 BENASOL FL 40 is a non yellowing, slightly thixotropic high-molecular weight alkyd resin, endowed with very good flow, fast drying and wide compatibility with medium-long-oil alkyd resins. In combination with medium-oil alkyd resins, is suitable for sealers, matt and semi-glossy paints employed in building and costruction industries endowed with good outdoor resistance properties. 收起 | |
| Benasol FX 97 | Benasedo | Benasol FX 97 is a new Alkyd Resin with 98% solid content, which allows the formulators to stay below the requested limits. Benasol FX 97 is easy to apply by brush and widely compatible with different types of resins; due to its properties, can be used as...展开 Benasol FX 97 is a new Alkyd Resin with 98% solid content, which allows the formulators to stay below the requested limits. Benasol FX 97 is easy to apply by brush and widely compatible with different types of resins; due to its properties, can be used as grinding vehicle and can be completed with a wide range of Long Oil Alkyd Resins. It is also suggested to improve gloss and build-up of conventional paints. 收起 | |
| Benasol FX66 | Benasedo | Benasol FX66 is used in high performance non-yellowing paints for interior and exterior, for building industry and "do-it-yourself". It provides very good colour retention, and has air applications. This product uses special unsaturated fatty acids, with ...展开 Benasol FX66 is used in high performance non-yellowing paints for interior and exterior, for building industry and "do-it-yourself". It provides very good colour retention, and has air applications. This product uses special unsaturated fatty acids, with a 67% oil and 70% solids content. This product has a colour [G.H.] maximum of 3, an A.V. solids amount of 6-10, and a viscosity [G.H.] of Z1-Z2. 收起 | |
| BENASOL GEL 220 | Benasedo | BENASOL GEL 220 is a soft-gel fast drying thixotropic alkyd resin, endowed with very good flow , body and color ritention. It is employed alone or combined with medium-long oil alkyd resins to formulate enamels, glossy paints, flat one-coat wall finishes ...展开 BENASOL GEL 220 is a soft-gel fast drying thixotropic alkyd resin, endowed with very good flow , body and color ritention. It is employed alone or combined with medium-long oil alkyd resins to formulate enamels, glossy paints, flat one-coat wall finishes or pigmented sealers for wood and “do it Your self”, applied by brush or roller. 收起 | |
| BENASOL HS 120 | Benasedo | BENASOL HS 120 is an air – dryng, non yellowing, long-oil alkyd resin with a particular molecular structure, endowed with fast air drying, good gloss, colour retention, good flow and superficial hardness. It’s easy to apply by brush and it’s widely compat...展开 BENASOL HS 120 is an air – dryng, non yellowing, long-oil alkyd resin with a particular molecular structure, endowed with fast air drying, good gloss, colour retention, good flow and superficial hardness. It’s easy to apply by brush and it’s widely compatible with different types of resins, showing excellent wetting properties. Due to its properties, can be used as grinding vehicle and to produce tinting pastes. It is also suggested to improve gloss and build-up of conventional paints. 收起 | |
| BENASOL HS 6922 | Benasedo | BENASOL HS 6922 is a non yellowing alkyd resin with a particular molecular structure, endowed with very fast air drying, good gloss and colour retention, good flow, superficial hardness. Easy to be applied by brush. It is suggested for white and coloured ...展开 BENASOL HS 6922 is a non yellowing alkyd resin with a particular molecular structure, endowed with very fast air drying, good gloss and colour retention, good flow, superficial hardness. Easy to be applied by brush. It is suggested for white and coloured air-drying enamels with high solid content, in the building sector and for internal and external maintenance. 收起 | |
| BENASOL HS 7100 | Benasedo | BENASOL HS 7100 is a non yellowing alkyd resin with a particular molecular structure, endowed with very fast air drying, good gloss and colour retention, good flow, superficial hardness. Easy to be applied by brush. It is suggested for white and coloured ...展开 BENASOL HS 7100 is a non yellowing alkyd resin with a particular molecular structure, endowed with very fast air drying, good gloss and colour retention, good flow, superficial hardness. Easy to be applied by brush. It is suggested for white and coloured air-drying enamels with high solid content, in the building sector and for internal and external maintenance. 收起 | |
| BENASOL HS 7380 | Benasedo | BENASOL HS 7380 is a non yellowing alkyd resin with a particular molecular structure, endowed with good air drying, gloss and colour retention. It is suggested for white and coloured air-drying enamels with high solid content, in the building sector and f...展开 BENASOL HS 7380 is a non yellowing alkyd resin with a particular molecular structure, endowed with good air drying, gloss and colour retention. It is suggested for white and coloured air-drying enamels with high solid content, in the building sector and for internal and external maintenance in compliance with the CE 2004 – 42 requirements for the VOC reduction . 收起 | |
| BENASOL HS 75 | Benasedo | BENASOL HS 75 is a non yellowing alkyd resin with a particular molecular structure, endowed with very fast air drying, good gloss and colour retention, good flow, superficial hardness and ease of brush application. It is suggested for white and coloured a...展开 BENASOL HS 75 is a non yellowing alkyd resin with a particular molecular structure, endowed with very fast air drying, good gloss and colour retention, good flow, superficial hardness and ease of brush application. It is suggested for white and coloured air-drying enamels with high solid content, in the building sector and for internal and external maintenance. 收起 | |
| BENASOL HS 753 | Benasedo | BENASOL HS 753 is a non yellowing alkyd resin , endowed with good air drying, gloss and colour retention. It is suggested for white and coloured air-drying enamels with high solid content, in the building sector and for internal and external maintenance. | |
| Benasol HS 754 | Benasedo | Benasol HS 754 is a non yellowing alkyd resin , endowed with good air drying, gloss and colour retention. It is suggested for white and coloured air-drying enamels with high solid content, in the building sector and for internal and external maintenance. | |
| BENASOL HS 86 | Benasedo | BENASOL HS 86 is a non yellowing alkyd resin with a particular molecular structure, endowed with very fast air drying, good gloss and colour retention, good flow, superficial hardness. Easy to be applied by brush. It is suggested for white and coloured ai...展开 BENASOL HS 86 is a non yellowing alkyd resin with a particular molecular structure, endowed with very fast air drying, good gloss and colour retention, good flow, superficial hardness. Easy to be applied by brush. It is suggested for white and coloured air-drying enamels with high solid content, in the building sector and for internal and external maintenance. 收起 | |
| BENASOL L 50 AV | Benasedo | BENASOL L 50 is an air-drying alkyd resin, endowed with good body, gloss and pigment wetting power. It is suitable for sealers, rust-inhibitive primers, clear and pigmented finishes for building and industrial maintenance both when used alone or in combin...展开 BENASOL L 50 is an air-drying alkyd resin, endowed with good body, gloss and pigment wetting power. It is suitable for sealers, rust-inhibitive primers, clear and pigmented finishes for building and industrial maintenance both when used alone or in combination with other alkyd resins. 收起 | |
| BENASOL L 65 | Benasedo | BENASOL L 65 is a long oil, low viscosity alkyd resin,endowed with a very good,trough dryng properties also in thick film, gloss and color retention, hardness,built and brushability. It is suggested for formulating sinthetic enamels, clear and pigmented p...展开 BENASOL L 65 is a long oil, low viscosity alkyd resin,endowed with a very good,trough dryng properties also in thick film, gloss and color retention, hardness,built and brushability. It is suggested for formulating sinthetic enamels, clear and pigmented paints for “ Do it Yourself “ and maintenance, alone or combined with oils urethane modified binders. 收起 | |
| Benasol R 126 | Benasedo | Benasol R 126 is used in polyurethane clear finishes and lacquers for wood and metals, with nitro and catalyze applications. It is made using castor oil, with a 53% oil and 60% solids content. This product has an OH solids amount of 5.4-5.6%, a colour [G....展开 Benasol R 126 is used in polyurethane clear finishes and lacquers for wood and metals, with nitro and catalyze applications. It is made using castor oil, with a 53% oil and 60% solids content. This product has an OH solids amount of 5.4-5.6%, a colour [G.H.] maximum of 5, and a viscosity [G.H.] of X-Y. 收起 | |
| Benasol R 127 | Benasedo | Benasol R 127 is used in polyurethane high build-up clear finishes and lacquers endowed with good adhesion and flexibility for metals and wood. It is made using castor oil, with a 59% oil and 60% solids content. This product has an OH solids amount of 5.2...展开 Benasol R 127 is used in polyurethane high build-up clear finishes and lacquers endowed with good adhesion and flexibility for metals and wood. It is made using castor oil, with a 59% oil and 60% solids content. This product has an OH solids amount of 5.2-5.4%, a colour [G.H.] maximum of 5, a viscosity [G.H.] of W-Y, and an A.V. solids level of 6-15. Benasol R 127 has catalyze and nitro applications. 收起 | |
| BENASOL R 40 D | Benasedo | BENASOL R 40 D is an alkyd resin having good properties of adhesion and flexibility, gloss and colour retention, build – up and flow. It is suitable to produce low temperature bake enamels crosslinked with amino resins. BENASOL R 40 D is also suggested to...展开 BENASOL R 40 D is an alkyd resin having good properties of adhesion and flexibility, gloss and colour retention, build – up and flow. It is suitable to produce low temperature bake enamels crosslinked with amino resins. BENASOL R 40 D is also suggested to formulate clear and pigmented acid- curing coatings and nitrocellulose lacquers. 收起 | |
| Benasol RC 45 | Benasedo | Benasol RC 45 is used in polyurethane sealers and mat finishes for wood as well as for nitrocellulose lacquers, and can be used in bake, nitro and catalyze applications. This product uses castor and vegetable fatty acids oil, with a 41% oil and 60% solids...展开 Benasol RC 45 is used in polyurethane sealers and mat finishes for wood as well as for nitrocellulose lacquers, and can be used in bake, nitro and catalyze applications. This product uses castor and vegetable fatty acids oil, with a 41% oil and 60% solids content. Benasol RC 45 as a viscosity [G.H.] of Z1-Z3, an A.V. solids amount of 6-15, and an OH solids level of 4.2-4.4%. 收起 | |
| Benasol RC 75 | Benasedo | Benasol RC 75 is used in high-gloss polyurethane finishes and vehicles to improve the general performances of wood systems, with nitro and catalyze applications. It uses castor oil type, with a 78% oil and 80% solids content. This product has an OH solids...展开 Benasol RC 75 is used in high-gloss polyurethane finishes and vehicles to improve the general performances of wood systems, with nitro and catalyze applications. It uses castor oil type, with a 78% oil and 80% solids content. This product has an OH solids amount of 5.8-6.0%, an A.V. solids amount of 6-10, a colour [G.H.] maximum 5, and a viscosity [G.H.] of X-Y. 收起 | |
| Benasol RT 43 | Benasedo | Benasol RT 43 is a vehicle to be used alone or combined with other Benasol for polyurethane sealers or mat finishes. It is endowed with high-body and fast drying, and has catalyze applications. This product contains castor and Talloil, with a 43% oil and ...展开 Benasol RT 43 is a vehicle to be used alone or combined with other Benasol for polyurethane sealers or mat finishes. It is endowed with high-body and fast drying, and has catalyze applications. This product contains castor and Talloil, with a 43% oil and 60% solids amount. It has a viscosity [G.H.] of Z1-Z2, an A.V. solids amount of 6-15, a color [ G.H.] maximum of 6, and an OH solids levle of 4.0-4.2%. 收起 | |
| BENASOL S 50 | Benasedo | BENASOL S 50 is an air-drying alkyd resin, endowed with good body, gloss and pigment wetting power. It is suitable for sealers, rust-inhibitive primers, clear and pigmented finishes for building and industrial maintenance both when used alone or in combin...展开 BENASOL S 50 is an air-drying alkyd resin, endowed with good body, gloss and pigment wetting power. It is suitable for sealers, rust-inhibitive primers, clear and pigmented finishes for building and industrial maintenance both when used alone or in combination with other alkyd resins. 收起 | |
| BENASOL S 60 | Benasedo | BENASOL S 60 s an air - drying alkyd resin showing high wetting power and large compatibility with pigments; it provides good gloss and flow, colour retention, exterior durability and excellent brushability. It is suitable for making white or light shades...展开 BENASOL S 60 s an air - drying alkyd resin showing high wetting power and large compatibility with pigments; it provides good gloss and flow, colour retention, exterior durability and excellent brushability. It is suitable for making white or light shades architectural enamels for interior and exterior, as well as for marine paints. 收起 | |
| BENASOL SI 25 | Benasedo | BENASOL SI 25 is a hydroxylated non–drying alkid resin for two components polyurethane topcoats endowed with excellent hardeness, build-up, solvent resistance and very good hadesion and flexibility. It is particularly suggested for formulating clear and p...展开 BENASOL SI 25 is a hydroxylated non–drying alkid resin for two components polyurethane topcoats endowed with excellent hardeness, build-up, solvent resistance and very good hadesion and flexibility. It is particularly suggested for formulating clear and pigmented topcoats for wood forniture with high characteristics of mar resistance and high glossy also after polishing , applied in very fast curing cycle by courtain coating or spray. 收起 | |
| BENASOL SI 32 | Benasedo | BENASOL SI 32 is an hydroxylated alkyd resin, endowed with good build–up, easy sandability, high reactivity and good chemical resistances. It is suggested for formulating fast drying glossy two components topcoats both for spray or curtain coating, easy t...展开 BENASOL SI 32 is an hydroxylated alkyd resin, endowed with good build–up, easy sandability, high reactivity and good chemical resistances. It is suggested for formulating fast drying glossy two components topcoats both for spray or curtain coating, easy to be polished and piled in a very short time. It’s especially recommended for wood coating applications 收起 | |
| BENASOL SI 83 | Benasedo | BENASOL SI 83 is an air – dryng, non yellowing, long-oil alkyd resin with a particular molecular structure, endowed with fast air drying, good gloss, colour retention, good flow and superficial hardness. It’s easy to apply by brush and it’s widely compati...展开 BENASOL SI 83 is an air – dryng, non yellowing, long-oil alkyd resin with a particular molecular structure, endowed with fast air drying, good gloss, colour retention, good flow and superficial hardness. It’s easy to apply by brush and it’s widely compatible with different types of resins, showing excellent wetting properties. Due to its properties, it can be used as grinding vehicle and to produce tinting pastes. It is also suggested to improve gloss and build-up of conventional paints. 收起 | |
| Benasol T 35 | Benasedo | Benasol T 35 is used in general industrial baking enamels and hammer bake coatings, and it has nitro and bake applications. This product uses Talloil, with a 35% oil and 50% solids content. This product has a viscosity [G.H.] of Z1-Z3, an A.V. solids leve...展开 Benasol T 35 is used in general industrial baking enamels and hammer bake coatings, and it has nitro and bake applications. This product uses Talloil, with a 35% oil and 50% solids content. This product has a viscosity [G.H.] of Z1-Z3, an A.V. solids level of 6-15, and an OH solids amount of 4.5-4.7%. 收起 | |
| Benasol T 68 | Benasedo | Benasol T 68 is used in high-solids enamels for building industry and in clear finishes and impregnating vehicles for wood, and has air applications. This product uses Talloil, with a 68% oil and 75% solids amount. It has a colour [G.H.] maximum of 9, an ...展开 Benasol T 68 is used in high-solids enamels for building industry and in clear finishes and impregnating vehicles for wood, and has air applications. This product uses Talloil, with a 68% oil and 75% solids amount. It has a colour [G.H.] maximum of 9, an A.V. solids level of 6-15, and a viscosity [G.H.] of Z-Z1. 收起 | |
| Benasol UR 4984 | Benasedo | Benasol UR 4984 is used in non-yellowing clear and pigmented coatings with excellent properties of through-dry, hardness, adhesion, chemical and marine resistance as well as in premium quality finishes for yachts and "do-it-yourself" applications. This pr...展开 Benasol UR 4984 is used in non-yellowing clear and pigmented coatings with excellent properties of through-dry, hardness, adhesion, chemical and marine resistance as well as in premium quality finishes for yachts and "do-it-yourself" applications. This product uses Safflower oil, with a 65% oil content. It has a modification of Aliphatic isocyanate and a white spirit solvent. Benasol UR 4984 has a solids content of 60%, a viscosity [G.H.] of Z1-Z3, an A.V. solids level of 1-3, and a colour [G.H.] maximum of 4. 收起 | |
| Benasol UR 59 in XILENE | Benasedo | Benasol UR 59 in XILENE is used in one-component sanding sealers and fast-drying mat finishes for wooden frames. It is compatible with nitrocellulose and vinyl copolymers. This product contains vegetable oil, with a 56% oil content. It has aromatic isocyn...展开 Benasol UR 59 in XILENE is used in one-component sanding sealers and fast-drying mat finishes for wooden frames. It is compatible with nitrocellulose and vinyl copolymers. This product contains vegetable oil, with a 56% oil content. It has aromatic isocynate modification and Xylene solvent, with a 50% solids content. Benasol UR 59 in XILENE has a viscosity [G.H.] of Z2-Z4, a colour [G.H.] maximum of 6, and an A.V. solids level of 1-3. 收起 | |
| Benasol UR 59 WHITE SPIRIT AROMATIC FREE | Benasedo | Benasol UR 59 WHITE SPIRIT AROMATIC FREE is used in one-component air-drying glossy and flat finishes, suggested for floors, window and door frames. This product uses vegetable oils, with a 58% oil content. It has an Aromatic isocyanate modification and w...展开 Benasol UR 59 WHITE SPIRIT AROMATIC FREE is used in one-component air-drying glossy and flat finishes, suggested for floors, window and door frames. This product uses vegetable oils, with a 58% oil content. It has an Aromatic isocyanate modification and white spirit solvent. Benasol UR 59 WS has a solids content of 50%, a viscosity [G.H.] of Z2-Z4, an A.V. solids level of 1-3, and a colour [G.H.] maximum of 6. 收起 | |
| Benasol UR 60 | Benasedo | Benasol UR 60 is used in one-component fast-drying clear varnishes with good resistance to industrial and marine environment as well as in coatings for floors, wooden frames and "do-it-yourself" applications. This product uses vegetable oils, has an aroma...展开 Benasol UR 60 is used in one-component fast-drying clear varnishes with good resistance to industrial and marine environment as well as in coatings for floors, wooden frames and "do-it-yourself" applications. This product uses vegetable oils, has an aromatic isocyanate modification and Xylene solvent, with a 65% oil and 60% solids content. Benasol UR 60 has an A.V. solids content of 1-3, a viscosity [G.H.] of Z2-Z4, and a colour [G.H.] maximum of 6. 收起 | |
| BENASOL UR 6005 | Benasedo | BENASOL UR 6005 is an air - drying, non yellowing, oil, modified with aliphatic isocyanate, endowed with very good colour and gloss retention, hardness, flexibility, flow and easy brushability. It is suggested to formulate clear and pigmented finishes for...展开 BENASOL UR 6005 is an air - drying, non yellowing, oil, modified with aliphatic isocyanate, endowed with very good colour and gloss retention, hardness, flexibility, flow and easy brushability. It is suggested to formulate clear and pigmented finishes for interior and exterior, when good weatherability and chemical or marine resistance are required, as for yachting paints. 收起 | |
| BENASOL UR 61 | Benasedo | BENASOL UR 61 is a fast air drying alkyd resin, modified with aromatic isocyanate, having a pale colour and giving hard and tough films. It is suggested for clear and pigmented finishes with high gloss, high body, excellent brushability and drying. It is ...展开 BENASOL UR 61 is a fast air drying alkyd resin, modified with aromatic isocyanate, having a pale colour and giving hard and tough films. It is suggested for clear and pigmented finishes with high gloss, high body, excellent brushability and drying. It is suggested for clear and pigmented finishes, easy to be applied by brush and showing good exterior durability, high gloss, flow and drying. 收起 | |
| Benasol UR 64 | Benasedo | Benasol UR 64 is an alkyd-urethane resin endowed with outdoor resistance, suggested to formulate clear or pigmented finishes for wood and metals. It uses soya fatty acids, has an Aliphatic isocyanate modification and a white spirit solvent, with a 61% oil...展开 Benasol UR 64 is an alkyd-urethane resin endowed with outdoor resistance, suggested to formulate clear or pigmented finishes for wood and metals. It uses soya fatty acids, has an Aliphatic isocyanate modification and a white spirit solvent, with a 61% oil and 55% solids content. Benasol UR 64 has an A.V. solids level of 1-3, a colour [G.H.] maximum of 5, and a viscosity [G.H.] of X-Y. 收起 | |
| Benasol UR 65 | Benasedo | Benasol UR 65 is used in non-yellowing varnishes and paints endowed with high-gloss retention, hardness and chalk-resistance. It uses soya fatty acids, has an Aliphatic isocyanate modification and a white spirit solvent, with a 58% oil and 55% solids cont...展开 Benasol UR 65 is used in non-yellowing varnishes and paints endowed with high-gloss retention, hardness and chalk-resistance. It uses soya fatty acids, has an Aliphatic isocyanate modification and a white spirit solvent, with a 58% oil and 55% solids content. Benasol UR 64 has an A.V. solids level of 2-6, a colour [G.H.] maximum of 5, and a viscosity [G.H.] of Z1-Z3. 收起 | |
| BENASOL UR 85 | Benasedo | BENASOL UR 85 is a high solid urethane modified alkyd resin with very good exterior resistance, color and gloss retention. It is suggested for clear and pigmented topcoats, both for glossy and, especially, matt products. | |
| BENCRYL PU 137 | Benasedo | BENCRYL PU 137 is a linear aliphatic urethane acrylated oligomer endowed with very good flexibility, good hardnes and adhesion on wood, plastic and paper. It is an ideal UV curing binder for wood floor coatings. | |
| BENCRYL PU 139 | Benasedo | BENCRYL PU 139 is an acrili oligomer, with a urethane aromatic modification, with good hardness and flexibility. It is indicated for paper, wood and plastic substrates, where adhesion and, especially, abrasion resi stance are requested. BENCRYL PU 139 is...展开 BENCRYL PU 139 is an acrili oligomer, with a urethane aromatic modification, with good hardness and flexibility. It is indicated for paper, wood and plastic substrates, where adhesion and, especially, abrasion resi stance are requested. BENCRYL PU 139 is curable thorugh EB or UV radiations, when used in combination with photoinitiators. 收起 | |
| BENCRYL PU 141 | Benasedo | BENCRYL PU 141 is a non-yellowing aliphatic urethane acrylated oligomer. It is suggested for formulating enamels for wood, plastic and paper endowed with good flexibility, very good abrasion and chemical resistances. UV curing is achived by the addition o...展开 BENCRYL PU 141 is a non-yellowing aliphatic urethane acrylated oligomer. It is suggested for formulating enamels for wood, plastic and paper endowed with good flexibility, very good abrasion and chemical resistances. UV curing is achived by the addition of photoinitiators whit small amounts of photoactivator (acrylated amine) 收起 | |
| BENCRYL PU 1515 | Benasedo | BENCRYL PU 1515 is a linear aromatic urethane acrylated oligomer endowed with good flexibility, very good chemicals resistances, hardness and adhesion on wood, plastic and paper. It is an ideal UV curing binder for wood floor coatings. | |
| Benester 2580 | Benasedo | Benester 2580 is used in high-yield coil-coating enamels with very good characteristics and adhesion on metals without primer. This product is a high aliphatic content with a blend of solvents. It contains 70% solids, a viscosity [G.H.] of Y-Z, an A.V. so...展开 Benester 2580 is used in high-yield coil-coating enamels with very good characteristics and adhesion on metals without primer. This product is a high aliphatic content with a blend of solvents. It contains 70% solids, a viscosity [G.H.] of Y-Z, an A.V. solids amount of 5-10, a colour [G.H.] maximum of 2, and an OH solids content of 0.9-1,1%. 收起 | |
| Benester 27 | Benasedo | Benester 27 is a sligty branched hydroxylated polyester resin. It is recommended for baking systems, crosslinked with amino resins and/or blocked aliphatic polyisocyanates, and particularly indicated for back coatings enamels in coil coating applications. | |
| Benester 46 | Benasedo | Benester 46 is a linear, saturated, slightly branched non yellowing Polyester resin. It is suggested for increasing the polyester systems flexibility. It is also suggested for baking primers and topcoats used in can and coil - coating fields. | |
| BENESTER 5327 | Benasedo | BENESTER 5327 is a high – solids, slightly branched, saturated Polyester Resin. It is particularly suggested to increase flexibility of the polyesters resins in can and coil systems, crosslinked with amino-resins or blocked aliphatic polyisocyanates. | |
| BENESTER 5918 | Benasedo | BENESTER 5918 is a slightly branched hydroxylated saturated polyester, endowed with very good adhesion and high–yield characteristics. It is suitable for concentraded pigment pastes due to its good wetting power. | |
| Benester 602 | Benasedo | Benester 602 is used in low-cost bake sealers and topcoats that are specially designed for coil-coatings with higher solid contents. It is linear, an H.B. Naphta/M.P.A. solvent, and has a 65% solids content. This product has a viscosity [G.H.] of U-V, an ...展开 Benester 602 is used in low-cost bake sealers and topcoats that are specially designed for coil-coatings with higher solid contents. It is linear, an H.B. Naphta/M.P.A. solvent, and has a 65% solids content. This product has a viscosity [G.H.] of U-V, an A.V. solids amount of 5-10, an OH solids amount of 1.3-1.5, and a color [G.H.] maximum of 3. 收起 | |
| Benester 694 | Benasedo | Benester 694 is a linear polyester with low hydroxyl value and high reactivity, endowed with good characteristics of adhesion and flexibility. It is employed in baking anticorrosive primers, crosslinked with amino-resins and/or blocked aliphatic polyisoci...展开 Benester 694 is a linear polyester with low hydroxyl value and high reactivity, endowed with good characteristics of adhesion and flexibility. It is employed in baking anticorrosive primers, crosslinked with amino-resins and/or blocked aliphatic polyisocianates, suitable for the coil-coating industry, where good mechanical performances are required. Benester 694 is also recommended for anticorrosive primers used in the Automotive industry. 收起 | |
| Benester 742 | Benasedo | Benester 742 is a slightly branched saturated polyester having a very good adhesion on aluminium and galvanized steel. Good balance between flexibility and surface hardness, colour and exterior resistance. | |
| Benester 839 | Benasedo | Benester 839 is a saturated polyester resin, slightly branched, endowed with excellent mechanical and high reactivity properties matched with good flow and brightness. It is employed, crosslinked with amino- resins or blocked polyisocyanates, in industria...展开 Benester 839 is a saturated polyester resin, slightly branched, endowed with excellent mechanical and high reactivity properties matched with good flow and brightness. It is employed, crosslinked with amino- resins or blocked polyisocyanates, in industrial baking primers and enamels, especially for base- coats and over-print varnishes with good printability properties also with UV inks, in cans, spray-bottles and collapsible tubes. 收起 | |
| Benester 896 | Benasedo | Benester 896 is a saturated polyester resin, slightly branched, endowed with excellent mechanical properties, high reactivity, good flow and brightness. It is employed, crosslinked with amino-resins or blocked polyisocyanates, in industrial baking primers...展开 Benester 896 is a saturated polyester resin, slightly branched, endowed with excellent mechanical properties, high reactivity, good flow and brightness. It is employed, crosslinked with amino-resins or blocked polyisocyanates, in industrial baking primers and enamels, particularly for base- coats and over-print varnishes with good printability properties also with UV inks, in cans, spray-bottles and collapsible tubes. 收起 | |
| Benester 910 | Benasedo | Benester 910 is a saturated polyester, slightly branched, with high aliphatic content and low hydroxyl value. It is suitable for baking application, especially for the coil coating industry. It has to be to be crosslinked with amino-resins and/or blocked ...展开 Benester 910 is a saturated polyester, slightly branched, with high aliphatic content and low hydroxyl value. It is suitable for baking application, especially for the coil coating industry. It has to be to be crosslinked with amino-resins and/or blocked aliphatic polyisocyanates so to guarantee good adhesion on alluminium and glavanized steel, for high-gloss and flexible exterior top-coats. 收起 | |
| BENESTER G22 | Benasedo | BENESTER G22 is a styrene free unsaturated polyester resins crosslinkable through “ Redox “ systems or UV lamps. It allows to obtain paints with very high gloss levels, hardness and similar pot life to the conventional ones diluted with Styrene. | |
| Benester L 83 | Benasedo | Benester L 83 is used in coil-coating enamels for interior/exterior that are endowed with high flexibility, gloss, and colour retention. This product is slightly branched, an H.B. Naphta/ Butylglycol/ M.P.A., and a 60% solids content. It has a viscosity [...展开 Benester L 83 is used in coil-coating enamels for interior/exterior that are endowed with high flexibility, gloss, and colour retention. This product is slightly branched, an H.B. Naphta/ Butylglycol/ M.P.A., and a 60% solids content. It has a viscosity [G.H.] of Z-Z1, an A.V. solids amount of 2-6, and a color [G.H.] maximum of 3, and an OH solids amount of 1.0-1.2. 收起 | |
| Benester LD 75 R in Isobutyl Acetate | Benasedo | Benester LD 75 R in Isobutyl Acetate is used in clear and pigmented sealers for wood. It provides clear finishes endowed with good brightness and high hardness. It can also be used in curing by U.V. or Redox and in tinting-pastes using isobutyl acetate ve...展开 Benester LD 75 R in Isobutyl Acetate is used in clear and pigmented sealers for wood. It provides clear finishes endowed with good brightness and high hardness. It can also be used in curing by U.V. or Redox and in tinting-pastes using isobutyl acetate version. This product has an 80% solids content, a viscosity [G.H.] of Z1-Z3, a colour [G.H.] maximum of 3, and an A.V. solids amount of 24-36. 收起 | |
| Benester LD 75 R in Styrene | Benasedo | Benester LD 75 R in Styrene is used in clear and pigmented sealers for wood that is easy-sanding and endowed with good brightness and high hardness. It is also used in curing by U.V. or Redox and in tinting-pastes using the isobutyl acetate version. This ...展开 Benester LD 75 R in Styrene is used in clear and pigmented sealers for wood that is easy-sanding and endowed with good brightness and high hardness. It is also used in curing by U.V. or Redox and in tinting-pastes using the isobutyl acetate version. This product has a viscosity [G.H.] of X-Y, an A.V. solids content of 24-36, a 75% solids amount, and a color [G.H.] maximum of 3. 收起 | |
| Benester PZ 300 | Benasedo | Benester PZ 300 is an aliphatic linear, with 100% solids and 8-18 A.V. solids content. This product has a viscosity [G.H.] of V-X, a color [G.H.] maximum of 5, and an OH solids of 2.0-2.2%. Benester PZ 300 is used in plasticizer polymers for two-component...展开 Benester PZ 300 is an aliphatic linear, with 100% solids and 8-18 A.V. solids content. This product has a viscosity [G.H.] of V-X, a color [G.H.] maximum of 5, and an OH solids of 2.0-2.2%. Benester PZ 300 is used in plasticizer polymers for two-component polyurethane systems for metals, flexibilizing vehicles for can and coil-coating systems, and tinting pastes for plastics. 收起 | |
| BENESTER T 76 | Benasedo | BENESTER T 76 s a slightly branched saturated polyester, with good characteristics of hardness, flexibility, adhesion, brightness and colour retention. It is suitable for baking primers and enamels when crosslinked with amino-resins and/or blocked aliphat...展开 BENESTER T 76 s a slightly branched saturated polyester, with good characteristics of hardness, flexibility, adhesion, brightness and colour retention. It is suitable for baking primers and enamels when crosslinked with amino-resins and/or blocked aliphatic polyisocyanates, used in can and coilcoating industry where post-formability is required. 收起 | |
| CV-1161 | NuSil Silicone Technology 1 | CV-1161 is a pressure sensitive silicone adhesive that retains its adhesive qualities in the presence of minor liquid and particulate contaminants. It can be used in applications that require low outgassing and minimal volatile condesable materials. This ...展开 CV-1161 is a pressure sensitive silicone adhesive that retains its adhesive qualities in the presence of minor liquid and particulate contaminants. It can be used in applications that require low outgassing and minimal volatile condesable materials. This product is ideal for adhering and bonding silicone elastomers, metals, paper, glass, fabric organics rubbers, some synthetics, and films such as polyester or kapton. 收起 | |
| CV-1500 | NuSil Silicone Technology 1 | CV-1500 is a one part, black, electrically conductive RTV silicone adhesive/sealant that can be used for RFI and EMI shielding in electrical and space applications that require static dissipation. It can also protect components from extremes in temperatur...展开 CV-1500 is a one part, black, electrically conductive RTV silicone adhesive/sealant that can be used for RFI and EMI shielding in electrical and space applications that require static dissipation. It can also protect components from extremes in temperature, humidity, radiation, thermal and mechanical stress. This adhesive is well suited for form-in-place conductive gaskets and attaching heating coils to solar collector plates. 收起 | |
| CV-2289-2 | NuSil Silicone Technology 1 | CV-2289-2 is a black silicone elastomer system that can be used as an adhesive under extreme conditions. When applied to electrical systems and assemblies, it will protect them against shock, vibration, dust, moisture and chemicals. This product is also a...展开 CV-2289-2 is a black silicone elastomer system that can be used as an adhesive under extreme conditions. When applied to electrical systems and assemblies, it will protect them against shock, vibration, dust, moisture and chemicals. This product is also able to withstand varying temperatures and has a high tear strength. 收起 | |
| CV-2500 | NuSil Silicone Technology 1 | CV-2500 is a strong silicone based adhesive that is made to handle extreme conditions in space applications including condensation, humidity, radiation, and both mechanical and thermal stress. It can also be an adhesive in applications that involve solar ...展开 CV-2500 is a strong silicone based adhesive that is made to handle extreme conditions in space applications including condensation, humidity, radiation, and both mechanical and thermal stress. It can also be an adhesive in applications that involve solar cell arrays where clarity and low volatility is needed. 收起 | |
| CV-2566 | NuSil Silicone Technology 1 | CV-2566 is a flowable silicone adhesive that has a broad operating temperature range. The primary use for this product is to be used for applications that require low outgassing and helps eliminate condensation in sensitive devices. In space and electroni...展开 CV-2566 is a flowable silicone adhesive that has a broad operating temperature range. The primary use for this product is to be used for applications that require low outgassing and helps eliminate condensation in sensitive devices. In space and electronic applications, it can be utilized as a sealant or adhesive to help control high vacuum environments. 收起 | |
| CV-2567 | NuSil Silicone Technology 1 | CV-2567 is a pourable RTV siicone that can be used as a diluent for reducing the viscosity of other controlled volatility silicones. This product meets the ASTM 595 low outgas specifications outlined in NASA and the European Space Agency. It can be used a...展开 CV-2567 is a pourable RTV siicone that can be used as a diluent for reducing the viscosity of other controlled volatility silicones. This product meets the ASTM 595 low outgas specifications outlined in NASA and the European Space Agency. It can be used as an adhesive or sealant for electronic and space applications. 收起 | |
| CV-2644 | NuSil Silicone Technology 1 | CV-2644 is a two-part, tan colored electrically conductive silicone adhesive/sealant. It meets the low outgas specifications outlined by NASA and the European Space Agency so it can be used in applications that require low outgassing under extreme operati...展开 CV-2644 is a two-part, tan colored electrically conductive silicone adhesive/sealant. It meets the low outgas specifications outlined by NASA and the European Space Agency so it can be used in applications that require low outgassing under extreme operating conditions. This product is well suited to use with form-in-place conductive gaskets. 收起 | |
| CV-2680-12 | NuSil Silicone Technology 1 | CV-2680-12 is a two-part film adhesive the cures at room temperature or rapidly with heat. It can be used for bonding or sealing silicone elastomers and some metals or plastics. This product is also ideal for applications that require shorter work times. ...展开 CV-2680-12 is a two-part film adhesive the cures at room temperature or rapidly with heat. It can be used for bonding or sealing silicone elastomers and some metals or plastics. This product is also ideal for applications that require shorter work times. easy clean-up, and consistent bond thickness. 收起 | |
| CV-2900 | NuSil Silicone Technology 1 | CV-2900 is a non-corrosive silicone adhesive that is designed for enhanced performance in extreme low and high temperatures. It can be used as a bond and sealant for applications such as overhead or vertical joints that require a non-slumping and one-part...展开 CV-2900 is a non-corrosive silicone adhesive that is designed for enhanced performance in extreme low and high temperatures. It can be used as a bond and sealant for applications such as overhead or vertical joints that require a non-slumping and one-part material. It can also be utilized as an adhesive , caulking or potting material in electronics/space applications that require minimal outgassing and provides protection from condensation in sensitive devices. 收起 | |
| CV1-2646 | NuSil Silicone Technology 1 | CV1-2646 is a silicone that is electrically conductive and can be used in applications that require a broad operating temperature range. This product can be used to for EMI and RFI shielding in electrical and space applications. It can also be utilized as...展开 CV1-2646 is a silicone that is electrically conductive and can be used in applications that require a broad operating temperature range. This product can be used to for EMI and RFI shielding in electrical and space applications. It can also be utilized as an adhesive to bond covers on housings or any application where a non-flowable material is needed. 收起 | |
| CV10-2500 | NuSil Silicone Technology 1 | CV10-2500 is an optically clear silicone system that is an ideal adhesive in low-strength applications such as with solar cell arrays where clarity and low volatility are important. It serves as an embedding or potting compound for electronic assemblies a...展开 CV10-2500 is an optically clear silicone system that is an ideal adhesive in low-strength applications such as with solar cell arrays where clarity and low volatility are important. It serves as an embedding or potting compound for electronic assemblies and components. It will protect against extreme humidity, radiation, thermal and mechanical stress. 收起 | |
| CV15-2500 | NuSil Silicone Technology 1 | CV15-2500 is an optically clear controlled volatile silicone that is ideal for applications that require a low viscosity for superior flow. It can be utilized as an adhesive in applications such as solar cell arrays where low volatility and clarity are i...展开 CV15-2500 is an optically clear controlled volatile silicone that is ideal for applications that require a low viscosity for superior flow. It can be utilized as an adhesive in applications such as solar cell arrays where low volatility and clarity are important. This product also serves as an embedding compound for electronic assemblies and it protects them from extreme humidity, radiation, mechanical and thermal stress. 收起 | |
| CV2-1142 | NuSil Silicone Technology 1 | CV2-1142 is a non-corrosive, non-slumping, translucent RTV silicone adhesive/sealant that has controlled volatility. It can be used in applications that require low outgassing under extreme operating conditions. This product is useful for sealing and bond...展开 CV2-1142 is a non-corrosive, non-slumping, translucent RTV silicone adhesive/sealant that has controlled volatility. It can be used in applications that require low outgassing under extreme operating conditions. This product is useful for sealing and bonding in applications such as overhead or vertical joints that require a non-slumping, one-part material. It can also be utilized as a sealant, caulking, adhesive or potting material in space and electrical applications that require minimal outgassing. 收起 |
