| Araldite® GT 7013 | Jubail Chemical Industries Co. | Araldite® GT 7013 is a solid, unmodified epoxy resin based on Bisphenol A. This product is characterized by its mechanical properties, electrical properties, corrosion resistance, gloss, adhesion properties, and filler loading. Araldite® GT 7013 is design...展开 Araldite® GT 7013 is a solid, unmodified epoxy resin based on Bisphenol A. This product is characterized by its mechanical properties, electrical properties, corrosion resistance, gloss, adhesion properties, and filler loading. Araldite® GT 7013 is designed for use in general and decorative coatings for metal furniture. 收起 | |
| Araldite® GT 7014 | Jubail Chemical Industries Co. | Araldite® GT 7014 is a solid, unmodified epoxy resin based on Bisphenol A. This product is characterized by its mechanical properties, electrical properties, corrosion resistance, gloss, adhesion properties, and filler loadings. Araldite® GT 7014 is desig...展开 Araldite® GT 7014 is a solid, unmodified epoxy resin based on Bisphenol A. This product is characterized by its mechanical properties, electrical properties, corrosion resistance, gloss, adhesion properties, and filler loadings. Araldite® GT 7014 is designed for use in coating systems in which high chemical resistance is important, metal coatings, tube coatings, and pipe coatings. 收起 | |
| Araldite® GZ 280 X 80 | Jubail Chemical Industries Co. | Araldite® GZ 280 X 80 is a typical type 1 epoxy resin based on Bisphenol A as a solvent cut 80% in Xylene. This product is characterized by its ability to improve the chemical resistance and mechanical properties in end products. Araldite® GZ 280 X 80 is ...展开 Araldite® GZ 280 X 80 is a typical type 1 epoxy resin based on Bisphenol A as a solvent cut 80% in Xylene. This product is characterized by its ability to improve the chemical resistance and mechanical properties in end products. Araldite® GZ 280 X 80 is used in the formulation for primers and finishing paints applied on metal substrates. 收起 | |
| CF1-141 | NuSil Silicone Technology 1 | CF1-141 is a high technology silicone primer that is specially formulated to be used with platinum-cured systems and is colored red to provide an easy visual determination of surface coverage. It is a lower Volatile Organic Component (VOC) product and air...展开 CF1-141 is a high technology silicone primer that is specially formulated to be used with platinum-cured systems and is colored red to provide an easy visual determination of surface coverage. It is a lower Volatile Organic Component (VOC) product and air dries. This primer improves adhesion of addition-cured systems to various substrates such as glass, metals, plastics, ceramics and other silicone materials. 收起 | |
| CF2-135 | NuSil Silicone Technology 1 | CF2-135 is a silicone primer that is specifically designed to be used with platinum-cured systems where conventional primers will not be sufficient. This product will help to improve the adhesion of addition-cured systems to various substrates such as woo...展开 CF2-135 is a silicone primer that is specifically designed to be used with platinum-cured systems where conventional primers will not be sufficient. This product will help to improve the adhesion of addition-cured systems to various substrates such as wood, metals, ceramics, plastics, and other silicone materials. For the best bonding results, be sure that the surface being primed is clean and degreased. 收起 | |
| CF6-135 | NuSil Silicone Technology 1 | CF6-135 is a one-component, high technology silicone primer that is translucent to preserve visibility with translucent products. It is specially designed to be used with platinum cured systems where conventional primers are insufficient. This product wil...展开 CF6-135 is a one-component, high technology silicone primer that is translucent to preserve visibility with translucent products. It is specially designed to be used with platinum cured systems where conventional primers are insufficient. This product will improve the adhesion of addition-cured systems to many different substrates such as glass, metals, plastics, ceramics and other silicone material. 收起 | |
| CV-2680-12 | NuSil Silicone Technology 1 | CV-2680-12 is a two-part film adhesive the cures at room temperature or rapidly with heat. It can be used for bonding or sealing silicone elastomers and some metals or plastics. This product is also ideal for applications that require shorter work times. ...展开 CV-2680-12 is a two-part film adhesive the cures at room temperature or rapidly with heat. It can be used for bonding or sealing silicone elastomers and some metals or plastics. This product is also ideal for applications that require shorter work times. easy clean-up, and consistent bond thickness. 收起 | |
| PSA-1170 | NuSil Silicone Technology 1 | PSA-1170 is a one-part, non-curing, pressure sensitive silicone adhesive that has a translucent appearance and a low viscosity. It can be used for temporarily adhering to various substrates such as silicone, glass, metals, and organic rubbers. PSA-1170 is...展开 PSA-1170 is a one-part, non-curing, pressure sensitive silicone adhesive that has a translucent appearance and a low viscosity. It can be used for temporarily adhering to various substrates such as silicone, glass, metals, and organic rubbers. PSA-1170 is supplied in flammable solvents so it needs to be handled cautiously. Allow solvent to evaporate before adhering or attaching adhesive-coated objects together. 收起 | |
| R4-1140 | NuSil Silicone Technology 1 | R4-1140 is a one-part, self leveling, solvent-free silicone adhesive that cures at room temperature upon exposure to atmospheric moisture. This product bonds aggressively to many surfaces including ceramics, metals, glass, synthetic and natural fibers, wo...展开 R4-1140 is a one-part, self leveling, solvent-free silicone adhesive that cures at room temperature upon exposure to atmospheric moisture. This product bonds aggressively to many surfaces including ceramics, metals, glass, synthetic and natural fibers, wood, painted surfaces, many plastics and other silicone rubbers. 收起 | |
| Razeen® LR 2280 | Jubail Chemical Industries Co. | Razeen® LR 2280 is a high viscosity, unmodified epoxy resin based on Bisphenol A. This product is characterized by its mechanical properties and chemical resistance. Razeen® LR 2280 is used in the formulation of anti-corrosion coatings, spray applied seal...展开 Razeen® LR 2280 is a high viscosity, unmodified epoxy resin based on Bisphenol A. This product is characterized by its mechanical properties and chemical resistance. Razeen® LR 2280 is used in the formulation of anti-corrosion coatings, spray applied sealer lacquers, and primers and finishing paints for metal substrates. 收起 | |
| Razeen® SL 2290 X 90 | Jubail Chemical Industries Co. | Razeen® SL 2290 X 90 is a semi-solid, modified epoxy resin based on Bisphenol A as a solvent cut in 90% in Xylene. This product is characterized by its ability to improve mechanical properties and chemical resistance in end products. Razeen® SL 2290 X 90 ...展开 Razeen® SL 2290 X 90 is a semi-solid, modified epoxy resin based on Bisphenol A as a solvent cut in 90% in Xylene. This product is characterized by its ability to improve mechanical properties and chemical resistance in end products. Razeen® SL 2290 X 90 is used in the formulation of primers applied on metal substrates. 收起 | |
| Razeen® SL 4150 X 90 | Jubail Chemical Industries Co. | Razeen® SL 4150 X 90 is a semi-solid epoxy resin based on Bisphenol A as a solvent cut 90% in Xylene. This product is characterized by its ability to improve mechanical properties and chemical resistance in end products. Razeen® SL 4150 X 90 is used in th...展开 Razeen® SL 4150 X 90 is a semi-solid epoxy resin based on Bisphenol A as a solvent cut 90% in Xylene. This product is characterized by its ability to improve mechanical properties and chemical resistance in end products. Razeen® SL 4150 X 90 is used in the formulation of primers and finishing paints applied on metal substrates and in high solids coatings. 收起 | |
| Razeen® SR 5013 | Jubail Chemical Industries Co. | Razeen® SR 5013 is a solid unmodified epoxy resin based on Bisphenol A. This product is characterized by it adhesion properties, gloss, mechanical properties, filler loading, and corrosion resistance. Razeen® SR 5013 has a softening point value of 85 - 92...展开 Razeen® SR 5013 is a solid unmodified epoxy resin based on Bisphenol A. This product is characterized by it adhesion properties, gloss, mechanical properties, filler loading, and corrosion resistance. Razeen® SR 5013 has a softening point value of 85 - 92 °C and is designed for use in high general industrial coatings and decorative coatings for metal furniture. 收起 | |
| Razeen® SR 5014 | Jubail Chemical Industries Co. | Razeen® SR 5014 is a solid, unmodified epoxy resin based on Bisphenol A. Razeen® SR 5014 is a fast reacting, medium melt viscosity solid epoxy resin designed for high performance powder coatings including hybrids. It is for use in coatings of complicated ...展开 Razeen® SR 5014 is a solid, unmodified epoxy resin based on Bisphenol A. Razeen® SR 5014 is a fast reacting, medium melt viscosity solid epoxy resin designed for high performance powder coatings including hybrids. It is for use in coatings of complicated metal objects, e.g., wire mesh, coil springs, spinning bobbins, steel furniture, tube and pipe coatings 收起 | |
| Razeen® SR 5097 | Jubail Chemical Industries Co. | Razeen® SR 5097 is a solid, unmodified epoxy resin based on Bisphenol A. This product is characterized by its flow, wetting properties, gloss, adhesion properties, sterilization performance, and flexibility, as well as its resistance to chemicals, solvent...展开 Razeen® SR 5097 is a solid, unmodified epoxy resin based on Bisphenol A. This product is characterized by its flow, wetting properties, gloss, adhesion properties, sterilization performance, and flexibility, as well as its resistance to chemicals, solvents, water, and corrosion. Razeen® SR 5097 is used in metal decorative finishes, can and coil coatings, drum and tank linings, application primers and enamels, metal furniture finishes, and primers. 收起 | |
| Razeen® SR 5174 | Jubail Chemical Industries Co. | Razeen® SR 5174 is a solid epoxy resin based on Bisphenol A. This product is characterized by its mechanical properties, electrical properties, corrosion resistance, gloss, adhesion properties, and filler loading. Razeen® SR 5174 is designed for use in th...展开 Razeen® SR 5174 is a solid epoxy resin based on Bisphenol A. This product is characterized by its mechanical properties, electrical properties, corrosion resistance, gloss, adhesion properties, and filler loading. Razeen® SR 5174 is designed for use in the formulation of general industrial coatings and decorative coatings for metal furniture. 收起 | |
| SP-120 | NuSil Silicone Technology 1 | SP-120 is a silicone primer that is formulated for use with one and two-part RTV systems, and does not need mixing.The translucent color of SP-120 helps to preserve visibility with other translucent products. This primer will also improve the adhesion of ...展开 SP-120 is a silicone primer that is formulated for use with one and two-part RTV systems, and does not need mixing.The translucent color of SP-120 helps to preserve visibility with other translucent products. This primer will also improve the adhesion of the RTV systems to other substrates such as metals, ceramics, glass, and wood. 收起 | |
| SP-121 | NuSil Silicone Technology 1 | SP-121 is a specially formulated silicone primer that is designed to be used with one and two-part RTV systems. This primer is red in color and provides an easy visual determination of surface coverage when using it. It will also improve the adhesion of t...展开 SP-121 is a specially formulated silicone primer that is designed to be used with one and two-part RTV systems. This primer is red in color and provides an easy visual determination of surface coverage when using it. It will also improve the adhesion of the RTV systems to various substrates such as glass, metals, rigid plastics, and ceramics. 收起 | |
| SP-124 | NuSil Silicone Technology 1 | SP-124 is a silicone primer that is designed for use with condensation cured systems where conventional silicone primers are ineffective. This product will help to improve the adhesion of one and two-part condensation cured systems to various substrates s...展开 SP-124 is a silicone primer that is designed for use with condensation cured systems where conventional silicone primers are ineffective. This product will help to improve the adhesion of one and two-part condensation cured systems to various substrates such as glass, ceramics, metal, rigid plastics, wood and some composites. It can be applied by wiping, brushing or dipping a uniform thin film onto the substrates. 收起 | |
| SP-270 | NuSil Silicone Technology 1 | SP-270 is a silicone primer that was specifically designed for use with platinum-cured systems where other conventional primers are insufficient. It is a one-component primer supplied in VM&P Naphtha so it requires no mixing at all. When applied to additi...展开 SP-270 is a silicone primer that was specifically designed for use with platinum-cured systems where other conventional primers are insufficient. It is a one-component primer supplied in VM&P Naphtha so it requires no mixing at all. When applied to addition-cured systems with iridite coated materials, it will improve the adhesion. This also holds true with other substrates including glass, metals, some plastics and other silicone materials. 收起 | |
| SP1-204 | NuSil Silicone Technology 1 | SP1-204 is a specially formulated translucent primer that is designed for use with one and two-part RTV systemts. This primer requires no mixing and air dries. It is an ideal product to help improve the adhesion of one and two-part systems to various subs...展开 SP1-204 is a specially formulated translucent primer that is designed for use with one and two-part RTV systemts. This primer requires no mixing and air dries. It is an ideal product to help improve the adhesion of one and two-part systems to various substrates such as glass, metals, plastics, ceramics and wood. 收起 |
