| CF1-135 | NuSil Silicone Technology 1 | CF1-135 is high technology translucent silicone primer that is specifically formulated for use with platinum cured systems where conventional primers are insufficient. This product can help improve the adhesion of addition-cured systems to different subst...展开 CF1-135 is high technology translucent silicone primer that is specifically formulated for use with platinum cured systems where conventional primers are insufficient. This product can help improve the adhesion of addition-cured systems to different substrates such as metals, ceramics, glass, some plastics and other silicone material. It is a one-component primer that is supplied in VM&P Napththa and it requires no mixing. 收起 | |
| CF1-141 | NuSil Silicone Technology 1 | CF1-141 is a high technology silicone primer that is specially formulated to be used with platinum-cured systems and is colored red to provide an easy visual determination of surface coverage. It is a lower Volatile Organic Component (VOC) product and air...展开 CF1-141 is a high technology silicone primer that is specially formulated to be used with platinum-cured systems and is colored red to provide an easy visual determination of surface coverage. It is a lower Volatile Organic Component (VOC) product and air dries. This primer improves adhesion of addition-cured systems to various substrates such as glass, metals, plastics, ceramics and other silicone materials. 收起 | |
| CF1-3510 | NuSil Silicone Technology 1 | CF1-3510 is a fluorosilicone potting and encapsulating elastomer that cures with the addition of heat. It is best used for applications that require solvent resistance and for molding parts such as stoppers, o-rings, and seals. This product can also be us...展开 CF1-3510 is a fluorosilicone potting and encapsulating elastomer that cures with the addition of heat. It is best used for applications that require solvent resistance and for molding parts such as stoppers, o-rings, and seals. This product can also be used as an encapsulating, potting and sealing material and it is best used in applications requiring an operating temperature range of -65°C to 240°C (-85°F to 465°F). 收起 | |
| CF1-3710-2 | NuSil Silicone Technology 1 | CF1-3710-2 is a fluorosilicone foam that has a 1:1 ratio with a white Part A and gray Part B for easy identification and mixing. This product cures very quickly at room temperature to an elastomeric foam. It can be used as a solvent resistant seal or in s...展开 CF1-3710-2 is a fluorosilicone foam that has a 1:1 ratio with a white Part A and gray Part B for easy identification and mixing. This product cures very quickly at room temperature to an elastomeric foam. It can be used as a solvent resistant seal or in shock and vibration dampening situations that require a flexible, light weight foam with exceptional radiation resistance and thermal insulation. This foam is especially useful where stability at higher and lower temperatures is required. 收起 | |
| CF1-3800 | NuSil Silicone Technology 1 | CF1-3800 is a thermally conductive, fluorosilicone elastomer that cures at room temperature, or rapidly with the addition of heat. It can be used to adhere covers on housings, modules, and other configurations that require a non-flowable material. This pr...展开 CF1-3800 is a thermally conductive, fluorosilicone elastomer that cures at room temperature, or rapidly with the addition of heat. It can be used to adhere covers on housings, modules, and other configurations that require a non-flowable material. This product can also be utilized as an adhesive, sealant or molding material when solvent resistance is needed. It can provide the transfer of heat between electrical components and heat sinks, and can operate at a temperature range of -65°C to 225°C (-85°F to 437°F). 收起 | |
| CF19-2186 | NuSil Silicone Technology 1 | CF19-2186 is a general purpose silicone elastomer that has a medium cure rate and is provided in mix and dispense applicators. This product can provide protection for assemblies and electronic components against, vibration, shock, ozone, moisture, dust an...展开 CF19-2186 is a general purpose silicone elastomer that has a medium cure rate and is provided in mix and dispense applicators. This product can provide protection for assemblies and electronic components against, vibration, shock, ozone, moisture, dust and other contaminants. It can also be utilized as an encapsulating or potting material, and can replicate surfaces and devices. 收起 | |
| CF19-2615 | NuSil Silicone Technology 1 | CF19-2615 is a two-part, silicone elastomer that is optically clear and solvent free. It cures at room temperature or rapidly with the addition of heat. This product can be use for photonics applications such as photo detectors, HBLEDs, lasers, flat panel...展开 CF19-2615 is a two-part, silicone elastomer that is optically clear and solvent free. It cures at room temperature or rapidly with the addition of heat. This product can be use for photonics applications such as photo detectors, HBLEDs, lasers, flat panel displays and discrete optics that require a 1.41 refractive index. It can also provide protection to electronic components and assemblies against vibration, shock, moisture, dust and other environmental hazards. 收起 | |
| CF2-135 | NuSil Silicone Technology 1 | CF2-135 is a silicone primer that is specifically designed to be used with platinum-cured systems where conventional primers will not be sufficient. This product will help to improve the adhesion of addition-cured systems to various substrates such as woo...展开 CF2-135 is a silicone primer that is specifically designed to be used with platinum-cured systems where conventional primers will not be sufficient. This product will help to improve the adhesion of addition-cured systems to various substrates such as wood, metals, ceramics, plastics, and other silicone materials. For the best bonding results, be sure that the surface being primed is clean and degreased. 收起 | |
| CF2-3521 | NuSil Silicone Technology 1 | CF2-3521 is a translucent fluorosilicone elastomer that cures rapidly with heat from an oven or heating lamp, or at room temperature. It can be utilized in applications that would require a good solvent resistance. This product is especially useful for mo...展开 CF2-3521 is a translucent fluorosilicone elastomer that cures rapidly with heat from an oven or heating lamp, or at room temperature. It can be utilized in applications that would require a good solvent resistance. This product is especially useful for molding parts such as O-rings, stoppers, and seals. 收起 | |
| CF2-3521-2 | NuSil Silicone Technology 1 | CF2-3521-2 is a two part, black, 50 mole % fluorosilicone elastomer that cures at room temperature, or rapidly with heat from a heating lamp or oven. This product can be especially useful for molding parts such as stoppers, seals, and O-rings. It can also...展开 CF2-3521-2 is a two part, black, 50 mole % fluorosilicone elastomer that cures at room temperature, or rapidly with heat from a heating lamp or oven. This product can be especially useful for molding parts such as stoppers, seals, and O-rings. It can also be used in applications that would require a solvent resistance. 收起 | |
| CF3-3521 | NuSil Silicone Technology 1 | CF3-3521 is a fluorosilicone elastomer that can be used with with liquid injection molding equipment. It is an exceptional product to use for molding high quality parts such as gaskets, seals and o-rings. It is also ideal for applications that require a m...展开 CF3-3521 is a fluorosilicone elastomer that can be used with with liquid injection molding equipment. It is an exceptional product to use for molding high quality parts such as gaskets, seals and o-rings. It is also ideal for applications that require a medium hardness silicone and solvent resistance. This product is best utilized in applications that require an operating temperature range of -65 to 240°C (-85 to 465°F). 收起 | |
| CF5-3521-2 | NuSil Silicone Technology 1 | CF5-3521-2 is a two part, 50 mole % fluorosilicone that has a 1:1 Mix Ratio (Part A:B). It can be cured at room temperature, or more rapidly by heating it in an oven or with a heating lamp. The product is especially useful as a coating, sealant, adhesive ...展开 CF5-3521-2 is a two part, 50 mole % fluorosilicone that has a 1:1 Mix Ratio (Part A:B). It can be cured at room temperature, or more rapidly by heating it in an oven or with a heating lamp. The product is especially useful as a coating, sealant, adhesive or molding material in applications that require solvent resistance. 收起 | |
| CF6-135 | NuSil Silicone Technology 1 | CF6-135 is a one-component, high technology silicone primer that is translucent to preserve visibility with translucent products. It is specially designed to be used with platinum cured systems where conventional primers are insufficient. This product wil...展开 CF6-135 is a one-component, high technology silicone primer that is translucent to preserve visibility with translucent products. It is specially designed to be used with platinum cured systems where conventional primers are insufficient. This product will improve the adhesion of addition-cured systems to many different substrates such as glass, metals, plastics, ceramics and other silicone material. 收起 | |
| CV-1142 | NuSil Silicone Technology 1 | CV-1142 is a non corrosive that has controlled volatility, RTV silicone adhesive/sealant.. It is best used as a sealing, caulking, adhesive or potting material in applications that require little outgassing. This helps to avoid condensation in sensitive d...展开 CV-1142 is a non corrosive that has controlled volatility, RTV silicone adhesive/sealant.. It is best used as a sealing, caulking, adhesive or potting material in applications that require little outgassing. This helps to avoid condensation in sensitive devices. Furthermore, it is also best used for applications requiring extremely low temperatures. 收起 | |
| CV-1143 | NuSil Silicone Technology 1 | CV-1143 is a silicone adhesive/sealant that is best used in applications that require low outgassing and minimal volatile condensables under extreme operating conditions. It is also used as a bond and sealant in applications such as overhead or vertical j...展开 CV-1143 is a silicone adhesive/sealant that is best used in applications that require low outgassing and minimal volatile condensables under extreme operating conditions. It is also used as a bond and sealant in applications such as overhead or vertical joints that require a non-slumping, and one-part materials. 收起 | |
| CV-1144-0 | NuSil Silicone Technology 1 | CV-1144-0 is an oxygen protective silicone overcoat that is used for applications where extremely low temperatures and low outgassing are a hazard. It functions as a protective overcoating for electric components and atomic oxygen resistance in space appl...展开 CV-1144-0 is an oxygen protective silicone overcoat that is used for applications where extremely low temperatures and low outgassing are a hazard. It functions as a protective overcoating for electric components and atomic oxygen resistance in space applications. This product also has a broad operating temperature range and can provide radiation and thermal stress resistance. 收起 | |
| CV-1146-2 | NuSil Silicone Technology 1 | CV-1146-2 is a one part, flat black silicone dispersion that meets outgas specifications outlined in NASA and the European Space Agency. It is an ideal product to use in space and electrical applications that require low outgassing under extreme operating...展开 CV-1146-2 is a one part, flat black silicone dispersion that meets outgas specifications outlined in NASA and the European Space Agency. It is an ideal product to use in space and electrical applications that require low outgassing under extreme operating conditions. It also provides an atomic oxygen protection and resistance to radiation and thermal stress. 收起 | |
| CV-1148 | NuSil Silicone Technology 1 | CV-1148 is a silicone atomic oxygen protective coating that can be use at a broad temperature range. This product is best used for applications that require low outgassing under extreme operating conditions. It exceeds the low outgas specifications outlin...展开 CV-1148 is a silicone atomic oxygen protective coating that can be use at a broad temperature range. This product is best used for applications that require low outgassing under extreme operating conditions. It exceeds the low outgas specifications outlined by NASA and the European Space Agency. 收起 | |
| CV-1152 | NuSil Silicone Technology 1 | CV-1152 is a silicone conformal coating that can be used for industrial or space applications that require low outgassing under extreme operating conditions. It can be utilized as a coating on rigid and flexible circuit boards, and can protect sensitive e...展开 CV-1152 is a silicone conformal coating that can be used for industrial or space applications that require low outgassing under extreme operating conditions. It can be utilized as a coating on rigid and flexible circuit boards, and can protect sensitive electronic components such as connectors and switches. This product can also provide protection against harsh environments while maintaining good dielectric properties. 收起 | |
| CV-2187 | NuSil Silicone Technology 1 | CV-2187 is a two-part, translucent, pourable silicone system that offers a high tear strength and good physical properties. Its primary function is to provide protection for electrical components against shock, vibration, moisture, dust, chemicals and oth...展开 CV-2187 is a two-part, translucent, pourable silicone system that offers a high tear strength and good physical properties. Its primary function is to provide protection for electrical components against shock, vibration, moisture, dust, chemicals and other environmental hazards. It can also protect potting connectors, cable and harness breakouts, molded high-voltage components, seals and gaskets. 收起 | |
| CV-2189-2 | NuSil Silicone Technology 1 | CV-2189-2 is a one-part, black, platinum catalyzed silicone glop-top that has a thixotropic consistency and a low modulus. The function of this product is to ensure microchip reliability by providing protection against vibration, shock, dust, chemicals an...展开 CV-2189-2 is a one-part, black, platinum catalyzed silicone glop-top that has a thixotropic consistency and a low modulus. The function of this product is to ensure microchip reliability by providing protection against vibration, shock, dust, chemicals and other hazards. It is also ideal for applications that require precise delivery configurations. 收起 | |
| CV-2287 | NuSil Silicone Technology 1 | CV-2287 is a pourable silicone elastomer that offers a high tear strength and a broad operating temperature range. The high tear strength of this product make it ideal for reinforcing potting connectors, cable harness breakouts, molded high-voltage compon...展开 CV-2287 is a pourable silicone elastomer that offers a high tear strength and a broad operating temperature range. The high tear strength of this product make it ideal for reinforcing potting connectors, cable harness breakouts, molded high-voltage components, seals and gaskets. It protects components against moisture, dust , chemicals, shock and vibration. 收起 | |
| CV-2289 | NuSil Silicone Technology 1 | CV-2289 is a two-part translucent silicone elastomer that is ideal for applications that require low outgassing and minimal volatile condensables under extreme operating conditions. This product has good physical properties including a high tear strength ...展开 CV-2289 is a two-part translucent silicone elastomer that is ideal for applications that require low outgassing and minimal volatile condensables under extreme operating conditions. This product has good physical properties including a high tear strength and broad operating temperature range. These properties make this a good product for protecting electric components against environmental hazards such as dust, moisture, shock and vibration. 收起 | |
| CV-2289-1 | NuSil Silicone Technology 1 | CV-2289-1 is a two-part, white silicone system that has a broad operating temperature range. This makes it an ideal product to use as an adhesive for extreme conditions. It can provide protection against moisture, dust, and other environmental hazards. Th...展开 CV-2289-1 is a two-part, white silicone system that has a broad operating temperature range. This makes it an ideal product to use as an adhesive for extreme conditions. It can provide protection against moisture, dust, and other environmental hazards. The high tear strength of this silicone elastomer make it affective in protecting seals, gaskets, and cable harness breakouts. 收起 | |
| CV-2391 | NuSil Silicone Technology 1 | CV-2391 is a low viscosity, low to medium density silicone rubber foam that can be utilized in shock and vibration dampening situations. It is ideal to use this product for intricate back-filling because it has a low viscosity. It can also be used for app...展开 CV-2391 is a low viscosity, low to medium density silicone rubber foam that can be utilized in shock and vibration dampening situations. It is ideal to use this product for intricate back-filling because it has a low viscosity. It can also be used for applications that require low outgassing and minimal volatile condensable materials. 收起 | |
| CV-2500-2 | NuSil Silicone Technology 1 | CV-2500-2 is a two-part, black silicone system that is commonly used for space and electronic applications. It can give components protection from hazardous environments such as humidity and chemicals. This product also serves as an adhesive in optical ap...展开 CV-2500-2 is a two-part, black silicone system that is commonly used for space and electronic applications. It can give components protection from hazardous environments such as humidity and chemicals. This product also serves as an adhesive in optical applications that require a black material to block light. 收起 | |
| CV-2502 | NuSil Silicone Technology 1 | CV-2502 is a thixotropic, translucent RTV silicone that is especially useful when environmental protection is needed for electronic and space applications. It stops condensation from harming sensitive devices. This product also can function as an embeddin...展开 CV-2502 is a thixotropic, translucent RTV silicone that is especially useful when environmental protection is needed for electronic and space applications. It stops condensation from harming sensitive devices. This product also can function as an embedding compound for electronic systems. 收起 | |
| CV-2510 | NuSil Silicone Technology 1 | CV-2510 is a white RTV silicone that is flowable and can be utilized as a sealant, caulk, adhesive or potting material in electronic and space applications where high vacuum environments are encountered. It is also equipped to handle a broad operating tem...展开 CV-2510 is a white RTV silicone that is flowable and can be utilized as a sealant, caulk, adhesive or potting material in electronic and space applications where high vacuum environments are encountered. It is also equipped to handle a broad operating temperature range. And it is functional in applications that require low outgassing under extreme operating conditions. 收起 | |
| CV-2568 | NuSil Silicone Technology 1 | CV-2568 is a thixotropic RTV silicone that has a low density and has controlled volatility. This product act as a bonding or sealant in space applications. It has a broad operating temperature range and can provide radiation resistance, oxidation and ther...展开 CV-2568 is a thixotropic RTV silicone that has a low density and has controlled volatility. This product act as a bonding or sealant in space applications. It has a broad operating temperature range and can provide radiation resistance, oxidation and thermal stability. It can also be utilized in applications that require low outgassing under extreme operating conditions. 收起 | |
| CV-2640 | NuSil Silicone Technology 1 | CV-2640 is a silicone that is electrically conductive and has controlled volatility. It can be used for applications that require low outgassing and minimum volatile condensables under extreme operating conditions. This product can also be used to adhere ...展开 CV-2640 is a silicone that is electrically conductive and has controlled volatility. It can be used for applications that require low outgassing and minimum volatile condensables under extreme operating conditions. This product can also be used to adhere covers onto housings or for any application where grooves require a flowable to limited flow material. 收起 | |
| CV-2646 | NuSil Silicone Technology 1 | CV-2646 is an electrically conductive RTV silicone that can be used as an adhesive to bond covers onto housings and other applications that require a non-flowable to a limited flow material. This product has a broad operating temperature range and can be ...展开 CV-2646 is an electrically conductive RTV silicone that can be used as an adhesive to bond covers onto housings and other applications that require a non-flowable to a limited flow material. This product has a broad operating temperature range and can be used for RFI and EMI shielding in space and electrical applications. 收起 | |
| CV-2942 | NuSil Silicone Technology 1 | CV-2942 is a two-part, thermally conductive silicone that uses platinum-catalyzed addition cure. It can be used for applications that require low outgassing under extreme operating conditions to avoid condensation from building in sensitive devices. This ...展开 CV-2942 is a two-part, thermally conductive silicone that uses platinum-catalyzed addition cure. It can be used for applications that require low outgassing under extreme operating conditions to avoid condensation from building in sensitive devices. This product is also able to provide moderate heat transfer between electrical/electronic components and their heat sinks. And, it can be used to adhere openings in modules or housings where a non-flowable material is needed. 收起 | |
| CV-2943 | NuSil Silicone Technology 1 | CV-2943 is a thermally conductive RTV silicone that has controlled volatility and is designed for enhanced performance in extreme high or low temperatures. It can be used for applications that require low outgassing and minimal volatile condensables under...展开 CV-2943 is a thermally conductive RTV silicone that has controlled volatility and is designed for enhanced performance in extreme high or low temperatures. It can be used for applications that require low outgassing and minimal volatile condensables under extreme operating conditions. This product is also utilized as an adhesive for openings in housings or modules where grooves and other configurations require a limited flow material. 收起 | |
| CV-2948 | NuSil Silicone Technology 1 | CV-2948 is a white, thermally conductive RTV silicone that is designed for exceptional performance in extreme high and low temperatures. It can be used as an adhesive for integrated circuit substrates, base plates, heat sinks or where grooves or other con...展开 CV-2948 is a white, thermally conductive RTV silicone that is designed for exceptional performance in extreme high and low temperatures. It can be used as an adhesive for integrated circuit substrates, base plates, heat sinks or where grooves or other configurations that require a non-flowable material. This product also able to provide heat transfer between electrical/electronic components and their heat sinks. 收起 | |
| CV-2960 | NuSil Silicone Technology 1 | CV-2960 is a flowable, white, thermally conductive silicone that is able to provide moderate heat transfer between electrical components and their heat sinks. This product can be used for adhereing openings in housing and modules where grooves or other co...展开 CV-2960 is a flowable, white, thermally conductive silicone that is able to provide moderate heat transfer between electrical components and their heat sinks. This product can be used for adhereing openings in housing and modules where grooves or other configurations require a limited flow material. It can also protect sensitive devices from condensation in environments that have extreme operating conditions. 收起 | |
| CV-2961 | NuSil Silicone Technology 1 | CV-2961 is a thermally conductive silicone that is designed for enhanced performance in extreme low and high temperatures. This makes it able to transfer heat between electronic components and their heat sinks. This product can also be applied in applicat...展开 CV-2961 is a thermally conductive silicone that is designed for enhanced performance in extreme low and high temperatures. This makes it able to transfer heat between electronic components and their heat sinks. This product can also be applied in applications where low outgassing is required to avoid condensation in sensitive devices. 收起 | |
| CV-2963 | NuSil Silicone Technology 1 | CV-2963 is a white, two-part, thermally conductive silicone that is well suited for applications that require a broad temperature operating range. It can be used as an adhesive for base plates, circuit substrates, heat sinks or where grooves or other conf...展开 CV-2963 is a white, two-part, thermally conductive silicone that is well suited for applications that require a broad temperature operating range. It can be used as an adhesive for base plates, circuit substrates, heat sinks or where grooves or other configurations require a non-flowable to limited flow material. This product can also transfer heat between heat sinks and electrical components. 收起 | |
| CV-8251 | NuSil Silicone Technology 1 | CV-8251 is a two-part clear silicone gel that is designed for enhanced performance in extreme low and high temperatures. Because of its low viscosity, it is an ideal material for potting intricate assemblies. It can also be used for applications that requ...展开 CV-8251 is a two-part clear silicone gel that is designed for enhanced performance in extreme low and high temperatures. Because of its low viscosity, it is an ideal material for potting intricate assemblies. It can also be used for applications that require minimal volatile condensables to protect sensitive devices from condensation. 收起 | |
| CV-9042 | NuSil Silicone Technology 1 | CV-9042 is a thermally conductive, white silicone grease that can be applied to base and mounting studs of transistors and other electrical components as a heat-sink seal. This product has excellent resistance to moisture, ozone and oxidation over a wide ...展开 CV-9042 is a thermally conductive, white silicone grease that can be applied to base and mounting studs of transistors and other electrical components as a heat-sink seal. This product has excellent resistance to moisture, ozone and oxidation over a wide temperature range. It can be used for its thermal conductivity because it has a high and low temperature stability with a low bleed. 收起 | |
| CV-9052 | NuSil Silicone Technology 1 | CV-9052 is an electrically conductive gray silicone grease that provides an excellent resistance to moisture, ozone and oxidation over a wide temperature range. This product can be used for applications requiring low gassing under extreme operating condit...展开 CV-9052 is an electrically conductive gray silicone grease that provides an excellent resistance to moisture, ozone and oxidation over a wide temperature range. This product can be used for applications requiring low gassing under extreme operating conditions to avoid condensation from building in sensitive devices. It can also provide lubrication and static dissipation in space and electronic applications. 收起 | |
| CV-9341 | NuSil Silicone Technology 1 | CV-9341 is a white silicone grease that can provide high thermal conductivity, high and low temperature stability, and low bleed. It can be applied to the base and mounting studs of transistors and other electrical components as a heat-sink seal. It is al...展开 CV-9341 is a white silicone grease that can provide high thermal conductivity, high and low temperature stability, and low bleed. It can be applied to the base and mounting studs of transistors and other electrical components as a heat-sink seal. It is also ideal for applications that require low outgassing under extreme operating conditions. 收起 | |
| CV1-1142 | NuSil Silicone Technology 1 | CV1-1142 is a one-part, translucent, self leveling RTV silicone. It can be used as a sealant, caulking, adhesive or potting material in electric and space applications that require little outgassing. It is also ideal for using as a sealant or bond with co...展开 CV1-1142 is a one-part, translucent, self leveling RTV silicone. It can be used as a sealant, caulking, adhesive or potting material in electric and space applications that require little outgassing. It is also ideal for using as a sealant or bond with controlled flow for consistent bond lines in applications that require a high extrusion rate and one-part material. 收起 | |
| CV1-1142-4 | NuSil Silicone Technology 1 | CV1-1142-4 is one-part, translucent, self-leveling RTV silicone that has a high extrusion rate. It is best used as a sealing, caulking, adhesive or potting material in applications that require little outgassing. This helps to avoid condensation in sensit...展开 CV1-1142-4 is one-part, translucent, self-leveling RTV silicone that has a high extrusion rate. It is best used as a sealing, caulking, adhesive or potting material in applications that require little outgassing. This helps to avoid condensation in sensitive devices. The product also has a built in UV tracer and it can be used for applications that require a broad operating temperature range. 收起 | |
| CV1-1144-0 | NuSil Silicone Technology 1 | CV1-1144-0 is a one-part silicone dispersion that functions as a protective overcoating for atomic oxygen resistance in space applications. Due to its non-corrosive nature, it is ideal for coating electronic components and provides resistance against radi...展开 CV1-1144-0 is a one-part silicone dispersion that functions as a protective overcoating for atomic oxygen resistance in space applications. Due to its non-corrosive nature, it is ideal for coating electronic components and provides resistance against radiation and thermal stress. This product meets the lo outgas specifications outlined in NASA and the European Space Agency. 收起 | |
| CV1-1148 | NuSil Silicone Technology 1 | CV1-1148 is a one-part black silicone dispersion that can be used for applications that require minimal volatile condensables under extreme operating conditions. This product can also provide atomic oxygen and electrostatic discharge protection. It is sui...展开 CV1-1148 is a one-part black silicone dispersion that can be used for applications that require minimal volatile condensables under extreme operating conditions. This product can also provide atomic oxygen and electrostatic discharge protection. It is suitable to use in applications that require a broad operating temperature range. 收起 | |
| CV1-2289-1 | NuSil Silicone Technology 1 | CV1-2289-1 is a potting and encapsulating silicone elastomer that has a 1:1 Mix Ratio (Part A:B). This product is ideal for use in potting connectors, cable harness breakouts, molded high-voltage terminals, gaskets and seals due to its high tear strength....展开 CV1-2289-1 is a potting and encapsulating silicone elastomer that has a 1:1 Mix Ratio (Part A:B). This product is ideal for use in potting connectors, cable harness breakouts, molded high-voltage terminals, gaskets and seals due to its high tear strength. It can provide protection for electronic components against shock, vibration, dust, chemicals, moisture and other environmental hazards. It can also be used in applications that require low outgassing under extreme operating conditions. 收起 | |
| CV1-2566 | NuSil Silicone Technology 1 | CV1-2566 is a red RTV silicone that can be used as an adhesive to help control high vacuum environments in electronic and space applications. This product can also withstand hazards such as extreme high or low temperatures. If an application requires low ...展开 CV1-2566 is a red RTV silicone that can be used as an adhesive to help control high vacuum environments in electronic and space applications. This product can also withstand hazards such as extreme high or low temperatures. If an application requires low outgassing this is the ideal sealant for the job. 收起 | |
| CV1-2640 | NuSil Silicone Technology 1 | CV1-2640 is an electrically conductive RTV silicone that can be used to adhere covers onto housings or any application where grooves and other configurations require a non flowable material. It can also be utilized as a shield for EMI and RFI in space and...展开 CV1-2640 is an electrically conductive RTV silicone that can be used to adhere covers onto housings or any application where grooves and other configurations require a non flowable material. It can also be utilized as a shield for EMI and RFI in space and electrical applications. Another function of this product is to protect sensitive devices from condensation. 收起 | |
| CV1-2960 | NuSil Silicone Technology 1 | CV1-2960 is a thermally conductive silicone that can be used to adhere base plates, integrated circuit substrates, and heat sinks or other configurations that require a flowable to limited flow material. This product is also suitable for applications that...展开 CV1-2960 is a thermally conductive silicone that can be used to adhere base plates, integrated circuit substrates, and heat sinks or other configurations that require a flowable to limited flow material. This product is also suitable for applications that require low outgassing under extreme operating conditions. It is able to provide heat transfer between electronic components and their heat sinks. 收起 | |
| CV1-2964 | NuSil Silicone Technology 1 | CV1-2964 is a silicone elastomer the has controlled volatility and can be used to transfer heat between heat sinks and electrical/electronic components. It can also be utilized for applications requiring low outgassing under extreme operating conditions. ...展开 CV1-2964 is a silicone elastomer the has controlled volatility and can be used to transfer heat between heat sinks and electrical/electronic components. It can also be utilized for applications requiring low outgassing under extreme operating conditions. This product may be used as an adhesive for integrated circuit substrates, base plates, heat sinks or where grooves require a limited flow material. 收起 | |
| CV1-8151 | NuSil Silicone Technology 1 | CV1-8151 is a two-part, clear silicone gel that has a controlled volatility. It can be used for applications that require low outgassing under extreme operating conditions. This product can also be utilized as an embedding or potting compound for environm...展开 CV1-8151 is a two-part, clear silicone gel that has a controlled volatility. It can be used for applications that require low outgassing under extreme operating conditions. This product can also be utilized as an embedding or potting compound for environmental protection of electronic components in space applications. 收起 | |
| CV10-2568 | NuSil Silicone Technology 1 | CV10-2568 is a two part RTV ablative silicone that can be used as a bonding, sealing, or potting material in electronic and space applications. This product will provide radiation resistance, low thermal conductivity, oxidation stability and thermal stabi...展开 CV10-2568 is a two part RTV ablative silicone that can be used as a bonding, sealing, or potting material in electronic and space applications. This product will provide radiation resistance, low thermal conductivity, oxidation stability and thermal stability. It can also be especially useful to bond solar cells to solar array panels as it has a broad operating temperature range. 收起 | |
| CV14-2500 | NuSil Silicone Technology 1 | CV14-2500 is a controlled volatility silicone system that incorporates an adhesion promoter and has a low viscosity. It can serve as a potting or embedding compound for electronic components to provide protection from extreme, radiation, humidity, mechani...展开 CV14-2500 is a controlled volatility silicone system that incorporates an adhesion promoter and has a low viscosity. It can serve as a potting or embedding compound for electronic components to provide protection from extreme, radiation, humidity, mechanical and thermal stress. This product can also be used to adhere covers onto housings, or any applications where grooves require a material that has superior flow. 收起 | |
| CV16-2500 | NuSil Silicone Technology 1 | CV16-2500 is a silicone elastomer that is designed for enhanced performance in extreme low and high temperatures. It can protect electronic components from environmental hazards such as humidity and radiation. This product is ideal for applications that ...展开 CV16-2500 is a silicone elastomer that is designed for enhanced performance in extreme low and high temperatures. It can protect electronic components from environmental hazards such as humidity and radiation. This product is ideal for applications that require super flow because of its low viscosity. 收起 | |
| CV2-1147 | NuSil Silicone Technology 1 | CV2-1147 is a silicone atomic oxygen protective coating that can be used in applications that require a broad operating temperature range. This coating will help protect electrical components from radiation and thermal stress. This product is also suitabl...展开 CV2-1147 is a silicone atomic oxygen protective coating that can be used in applications that require a broad operating temperature range. This coating will help protect electrical components from radiation and thermal stress. This product is also suitable to use in applications that require low outgassing in extreme operating conditions. 收起 | |
| CV2-1148 | NuSil Silicone Technology 1 | CV2-1148 is a black silicone oxygen protective coating that can be used for bonding applications where a non-slumping and one-part material is required. This product can also provide excellent joint coverage and thin section encapsulation. It is ideal for...展开 CV2-1148 is a black silicone oxygen protective coating that can be used for bonding applications where a non-slumping and one-part material is required. This product can also provide excellent joint coverage and thin section encapsulation. It is ideal for applications that require minimal volatile condensables under extreme operating conditions. 收起 | |
| CV2-2289-1 | NuSil Silicone Technology 1 | CV2-2289-1 is encapsulating silicone elastomer that offers medium strength, low modulus, and a broad operating temperature range. It is an ideal adhesive application where large surface areas must be covered. It also provides protection for electrical com...展开 CV2-2289-1 is encapsulating silicone elastomer that offers medium strength, low modulus, and a broad operating temperature range. It is an ideal adhesive application where large surface areas must be covered. It also provides protection for electrical components against shock, vibration, moisture, dust, chemicals and other environmental hazards. 收起 | |
| CV2-2566 | NuSil Silicone Technology 1 | CV2-2566 is a two-part, thixotropic red RTV silicone that can be used as a potting material, sealant, caulking, or adhesive in space and electronic applications where a high vacuum environment is encountered. This is a versatile product because in can fun...展开 CV2-2566 is a two-part, thixotropic red RTV silicone that can be used as a potting material, sealant, caulking, or adhesive in space and electronic applications where a high vacuum environment is encountered. This is a versatile product because in can function within a broad operating temperature range. It can also be used to bond solar cells to solar array panels. 收起 | |
| CV2-2640 | NuSil Silicone Technology 1 | CV2-2640 is a static dissipative RTV silicone that can be used to protect electrical components and sensitive devices from condensation building up. This product can also be used for EMI and RFI shielding in electronic and space applications. It is a non-...展开 CV2-2640 is a static dissipative RTV silicone that can be used to protect electrical components and sensitive devices from condensation building up. This product can also be used for EMI and RFI shielding in electronic and space applications. It is a non-flowing material so it can be used to adhere covers onto housings. 收起 | |
| CV2-2646 | NuSil Silicone Technology 1 | CV2-2646 is an electrically conductive RTV silicone that is used for RFI and EMI shielding in electronic and space applications. This product is able to maintain electric conductivity over a broad operating temperature range. It is well suited for formed-...展开 CV2-2646 is an electrically conductive RTV silicone that is used for RFI and EMI shielding in electronic and space applications. This product is able to maintain electric conductivity over a broad operating temperature range. It is well suited for formed-in-place conductive gaskets and designed for enhanced performance in extreme low and high temperatures. 收起 | |
| CV2-2946 | NuSil Silicone Technology 1 | CV2-2946 is a volatility controlled silicone that cures with the addition of heat and is desgned to allow bond line thickness of <=50 Microns. It can be used to adhere integrated circuit substrates, base plates, heat sinks or where a non-flowable material...展开 CV2-2946 is a volatility controlled silicone that cures with the addition of heat and is desgned to allow bond line thickness of <=50 Microns. It can be used to adhere integrated circuit substrates, base plates, heat sinks or where a non-flowable material is required. This product also has the ability to provide heat transfer between electrical/electronic component and their heat sinks. 收起 | |
| CV3-1142 | NuSil Silicone Technology 1 | CV3-1142 is a one-part translucent material that is also a non-slumping silicone RTV. It is best used as a sealant, caulk, adhesive or potting material in electrical and space applications that require low outgassing, and minimal volatile condensables und...展开 CV3-1142 is a one-part translucent material that is also a non-slumping silicone RTV. It is best used as a sealant, caulk, adhesive or potting material in electrical and space applications that require low outgassing, and minimal volatile condensables under extreme operating conditions. This product also provides corrosion protection for sensitive circuits such as connectors, switches and other electrical components. It can also be utilized in bonding and sealing applications that require a non-slumping material. 收起 | |
| CV3-1144-1 | NuSil Silicone Technology 1 | CV3-1144-1 is a white silicone dispersion that has a non-corrosive cure which makes it an ideal coating for electronics components. This product can be utilized as a protective overcoating for atomic oxygen resistance in space applications. It also provid...展开 CV3-1144-1 is a white silicone dispersion that has a non-corrosive cure which makes it an ideal coating for electronics components. This product can be utilized as a protective overcoating for atomic oxygen resistance in space applications. It also provides protection from thermal stress and radiation. 收起 | |
| CV4-1161-5 | NuSil Silicone Technology 1 | CV4-1161-5 is a one-part, double-sided pressure sensitive adhesive tape that is best used to adhere and bond metals, paper, glass, fabric, organic rubbers, synthetics and films. It has the ability to collect dust in and around sensitive electronic compone...展开 CV4-1161-5 is a one-part, double-sided pressure sensitive adhesive tape that is best used to adhere and bond metals, paper, glass, fabric, organic rubbers, synthetics and films. It has the ability to collect dust in and around sensitive electronic components and is designed to withstand extreme temperature/pressure variations. 收起 | |
| CV7-2289-1 | NuSil Silicone Technology 1 | CV7-2289-1 is an encapsulating silicone elastomer that is best used for applications that require low outgassing and minimal volatile condensables under extreme operating conditions. In these extreme conditions this product will help protect electrical sy...展开 CV7-2289-1 is an encapsulating silicone elastomer that is best used for applications that require low outgassing and minimal volatile condensables under extreme operating conditions. In these extreme conditions this product will help protect electrical systems against environmental hazards such as vibration, shock, dust and chemicals. 收起 | |
| EPM-2490 | NuSil Silicone Technology 1 | EPM-2490 is a two-part, white, thermally conductive, electrically insulating silicone system that is non-corrosive. It can be used in applications that require a a broad operating temperature range. It is ideal to be used when a form-in-place, thermal int...展开 EPM-2490 is a two-part, white, thermally conductive, electrically insulating silicone system that is non-corrosive. It can be used in applications that require a a broad operating temperature range. It is ideal to be used when a form-in-place, thermal interface material (TIM) is needed for use as a sealing, caulking, adhesive or potting material in electronics applications that require little volatility to prevent contamination in sensitive devices. This TIM is designed to provide heat transfer between electrical/electronic components and their heat sinks for a variety of component level packaging. 收起 | |
| EPM1-2493 | NuSil Silicone Technology 1 | EPM1-2493 is a white, thermally conductive silicone elastomer that has low viscosity and cures with the addition of heat. It can be used to adhere integrated circuit substrates, heat sinks, base plates or where grooves or other configurations that requir...展开 EPM1-2493 is a white, thermally conductive silicone elastomer that has low viscosity and cures with the addition of heat. It can be used to adhere integrated circuit substrates, heat sinks, base plates or where grooves or other configurations that require a material with limited flow. This product is ideal for applications that require a low volatility, conformal, thermally conductive silicone that can transfer heat between electrical components and and their heat sinks. 收起 | |
| FS-3502-1 | NuSil Silicone Technology 1 | FS-3502-1 is a white, fluorosilicone gel that cures in contact with most materials, exceptions include: sulfur-cured organic rubbers, latex, chlorinated rubbers, some RTV silicones and unreacted residues. This gel can be used for filling small gaps as wel...展开 FS-3502-1 is a white, fluorosilicone gel that cures in contact with most materials, exceptions include: sulfur-cured organic rubbers, latex, chlorinated rubbers, some RTV silicones and unreacted residues. This gel can be used for filling small gaps as well as applications that require solvent and/or fuel resistance. It bonds aggressively to most surfaces and can be used for components exposed to JP-8, aviation fuels and solvents. 收起 | |
| LS-8941 | NuSil Silicone Technology 1 | LS-8941 is a two-part, optically clear, non-phenyl containing addition cure silicone. It is designed to stay thermo-optically stable with the exposure of heat and UV light. This product has a viscosity that is designed to be used with conventional Liquid ...展开 LS-8941 is a two-part, optically clear, non-phenyl containing addition cure silicone. It is designed to stay thermo-optically stable with the exposure of heat and UV light. This product has a viscosity that is designed to be used with conventional Liquid Injection Molding equipment, and the material is self-leveling for casting application techniques. It is also ideal for molding or casting hard, non-yellowing lenses for LED, solar or other applications where a hard, optically-stable silicone is needed. 收起 | |
| LS2-6140 | NuSil Silicone Technology 1 | LS2-6140 is an optically clear, primerless silicone encapsulant that has a low volatility and a high purity. This product can help protect electrical components and assemblies from moisture, chemicals, dust, shock, vibration, and other environmental hazar...展开 LS2-6140 is an optically clear, primerless silicone encapsulant that has a low volatility and a high purity. This product can help protect electrical components and assemblies from moisture, chemicals, dust, shock, vibration, and other environmental hazards. It has exceptional thermal stability and is designed to work in optically harsh environments where high power led and uv led packages are a factor. 收起 | |
| LS2-6941 | NuSil Silicone Technology 1 | LS2-6941 is an optically clear silicone elastomer that has a low viscosity and is solvent free. This product offers excellent physical and electrical stability across a broad temperature range. It can be used for photonics applications such as photo detec...展开 LS2-6941 is an optically clear silicone elastomer that has a low viscosity and is solvent free. This product offers excellent physical and electrical stability across a broad temperature range. It can be used for photonics applications such as photo detectors, lasers, HBLEDs, discrete optics and flat panel displays that require a 1.41 refractive index. It can also provide protection for electronic components from vibration, shock, dust, moisture and other environmental hazards by potting or encapsulating. 收起 | |
| Milecell 60 HPMC | MPI Chemie B.V. | Milecell 60 HPMC is hydroxy propyl methyl cellulose in the form of a white to slightly off-white fibrous or granular powder. It is used as a cellulose ether additive in paint, adhesive, and printing industries. Milecell 60 HPMC acts as a thickener, water ...展开 Milecell 60 HPMC is hydroxy propyl methyl cellulose in the form of a white to slightly off-white fibrous or granular powder. It is used as a cellulose ether additive in paint, adhesive, and printing industries. Milecell 60 HPMC acts as a thickener, water retention agent, suspension aid, and colloid protector in applications such as dispersion paints, inks, table coatings, wallpaper paste, and tile adhesives. 收起 | |
| Milecell 65 HPMC | MPI Chemie B.V. | Milecell 65 HPMC is hydroxy propyl methyl cellulose in the form of a white to slightly off-white fibrous or granular powder. It is used as a cellulose ether additive in paint, adhesive, and printing industries. Milecell 65 HPMC acts as a thickener, water ...展开 Milecell 65 HPMC is hydroxy propyl methyl cellulose in the form of a white to slightly off-white fibrous or granular powder. It is used as a cellulose ether additive in paint, adhesive, and printing industries. Milecell 65 HPMC acts as a thickener, water retention agent, suspension aid, and colloid protector in applications such as dispersion paints, inks, table coatings, wallpaper paste, and tile adhesives. 收起 | |
| Milecell 75 HPMC | MPI Chemie B.V. | Milecell 75 HPMC is hydroxy propyl methyl cellulose in the form of a white to slightly off-white fibrous or granular powder. It is used as a cellulose ether additive in paint, adhesive, and printing industries. Milecell 75 HPMC acts as a thickener, water ...展开 Milecell 75 HPMC is hydroxy propyl methyl cellulose in the form of a white to slightly off-white fibrous or granular powder. It is used as a cellulose ether additive in paint, adhesive, and printing industries. Milecell 75 HPMC acts as a thickener, water retention agent, suspension aid, and colloid protector in applications such as dispersion paints, inks, table coatings, wallpaper paste, and tile adhesives. 收起 | |
| Milecell EC Standard | MPI Chemie B.V. | Milecell EC Standard is ethyl cellulose in the form of a white powder or granules. It is used as a cellulose ether additive in paint, adhesive, and printing industries. Milecell EC Standard acts as a thickener, water retention agent, suspension aid, and c...展开 Milecell EC Standard is ethyl cellulose in the form of a white powder or granules. It is used as a cellulose ether additive in paint, adhesive, and printing industries. Milecell EC Standard acts as a thickener, water retention agent, suspension aid, and colloid protector in applications such as dispersion paints, inks, table coatings, wallpaper paste, and tile adhesives. 收起 | |
| Mileflame FR 20-25 | MPI Chemie B.V. | Mileflame FR 20-25 is potassium perfluorobutane sulfonate in the form of a white powder. It is used as a non-halogenated flame retardant in coating applications. | |
| Mileflame FR 5060 | MPI Chemie B.V. | Mileflame FR 5060 is a white crystal powder used as a non-halogenated flame retardant in coating applications. | |
| Mileflame HPCTP | MPI Chemie B.V. | Mileflame HPCTP is hexaphenoxycyclotriphosphazene in the form of a white crystal powder / flakes. It is used as a non-halogenated flame retardant in coating applications. | |
| Mileflame NP 1000 | MPI Chemie B.V. | Mileflame NP 1000 is a proprietary blend of chemicals in the form of a white powder. It is used as a non-halogenated flame retardant in coating applications. Inorganic fillers, such as glass fiber, calcium carbonate and barium sulphate, will affect the fl...展开 Mileflame NP 1000 is a proprietary blend of chemicals in the form of a white powder. It is used as a non-halogenated flame retardant in coating applications. Inorganic fillers, such as glass fiber, calcium carbonate and barium sulphate, will affect the flame retardancy of this product. 收起 | |
| Mileflame NP 2000 | MPI Chemie B.V. | Mileflame NP 2000 is a proprietary blend of chemicals in the form of a white powder. It is used as a non-halogenated flame retardant in coating applications. | |
| Mileflame NP 3000 | MPI Chemie B.V. | Mileflame NP 3000 is a proprietary blend of chemicals in the form of a white powder. It is used as a non-halogenated flame retardant in coating applications. | |
| Mileflame NP 4000 | MPI Chemie B.V. | Mileflame NP 4000 is a proprietary blend of chemicals in the form of a white powder. It is used as a non-halogenated flame retardant in coating applications. | |
| Mileflame S-1000 | MPI Chemie B.V. | Mileflame S-1000 is a mixture of chemicals in the form of a white powder. It is used as a non-halogenated flame retardant in coating applications. | |
| Mileflame S-2000 | MPI Chemie B.V. | Mileflame S-1000 is a mixture of chemicals in the form of a white powder. It is used as a non-halogenated flame retardant in coating applications. | |
| Milestat 1013 | MPI Chemie B.V. | Milestat 1013 is a glycerol mono stearate in the form of white pastilles. It is used as an antistatic agent and makes the surface or material itself slightly conductive. | |
| Milestat 129-V | MPI Chemie B.V. | Milestat 129-V is a glycerol mono stearate in the form of white free flowing powder. It is used as an antistatic agent and makes the surface or material itself slightly conductive. | |
| MPI Bright 100 | MPI Chemie B.V. | MPI Bright 100 is an optical brightener in the form of a yellowish powder. It is used as a whitening agent in paints and inks. MPI Bright 100 is designed to brighten colors and mask yellowing in desired applications. | |
| MPI Bright 200 | MPI Chemie B.V. | MPI Bright 200 is an optical brightener in the form of a bright yellow crystal powder. It is used as a whitening agent in paints and inks. MPI Bright 200 is designed to brighten colors and mask yellowing in desired applications. | |
| MPI Bright 300 | MPI Chemie B.V. | MPI Bright 300 is an optical brightener in the form of a yellowish-green powder. It is used as a whitening agent in paints and inks. MPI Bright 300 is designed to brighten colors and mask yellowing in desired applications. | |
| MPI Bright 420 | MPI Chemie B.V. | MPI Bright 420 is an optical brightener in the form of a yellowish green crystalline powder. It is used as a whitening agent in paints and inks. MPI Bright 420 is designed to brighten colors and mask yellowing in desired applications. | |
| MPI Bright 450 | MPI Chemie B.V. | MPI Bright 450 is an optical brightener in the form of a yellowish green crystalline powder. It is used as a whitening agent in paints and inks. MPI Bright 450 is designed to brighten colors and mask yellowing in desired applications. | |
| MPI Bright CBS-X | MPI Chemie B.V. | MPI Bright CBS-X is an optical brightener in the form of a yellowish crystal powder. It is used as a whitening agent in paints and inks. MPI Bright CBS-X is designed to brighten colors and mask yellowing in desired applications. | |
| MPI Bright ER-1 | MPI Chemie B.V. | MPI Bright ER-1 is an optical brightener in the form of a yellowish crystal powder. It is used as a whitening agent in paints and inks. MPI Bright ER-1 is designed to brighten colors and mask yellowing in desired applications. | |
| MPI Bright ER-2 | MPI Chemie B.V. | MPI Bright ER-2 is an optical brightener in the form of a pale yellow powder. It is used as a whitening agent in paints and inks. MPI Bright ER-2 is designed to brighten colors and mask yellowing in desired applications. | |
| MPI Bright ER-3 | MPI Chemie B.V. | MPI Bright ER-3 is an optical brightener in the form of a yellowish green crystal powder. It is used as a whitening agent in paints and inks. MPI Bright ER-3 is designed to brighten colors and mask yellowing in desired applications. | |
| MPI Bright FP 127 | MPI Chemie B.V. | MPI Bright FP 127 is an optical brightener in the form of a light yellow powder. It is used as a whitening agent in paints and inks. MPI Bright FP 127 is designed to brighten colors and mask yellowing in desired applications. | |
| R-1008-1 | NuSil Silicone Technology 1 | R-1008-1 is a white, RTV silicone coating and marking ink that is a one part, flowable silicone elastomer dispersion and cures in 7 days at room temperature when exposed to atmospheric moisture. It is best used for applications that require an operating t...展开 R-1008-1 is a white, RTV silicone coating and marking ink that is a one part, flowable silicone elastomer dispersion and cures in 7 days at room temperature when exposed to atmospheric moisture. It is best used for applications that require an operating temperature of 65°C to 260°C (-85°F to 465°F).This product can be used as a marking ink for silicone rubber parts and other components where the coating must maintain long term stability. 收起 | |
| R-1008-2 | NuSil Silicone Technology 1 | R-1008-2 is a black RTV silicone coating and marking ink that is a one part, flowable silicone elastomer dispersion, and cures in 7 days at room temperature when exposed to atmospheric moisture. It is best used for applications that require an operating t...展开 R-1008-2 is a black RTV silicone coating and marking ink that is a one part, flowable silicone elastomer dispersion, and cures in 7 days at room temperature when exposed to atmospheric moisture. It is best used for applications that require an operating temperature of 65°C to 260°C (-85°F to 465°F).This product can be used on silicone rubber parts as a marking ink where the coating must maintain long term stability. 收起 | |
| R-1008-3 | NuSil Silicone Technology 1 | R-1008-3 is a red, non corrosive, flowable silicone elastomer dispersion that cures in 7 days at room temperature. This product is long lasting, and is used as a marking ink for silicone rubber parts as well as other components that require a coating with...展开 R-1008-3 is a red, non corrosive, flowable silicone elastomer dispersion that cures in 7 days at room temperature. This product is long lasting, and is used as a marking ink for silicone rubber parts as well as other components that require a coating with long term stability. 收起 | |
| R-1008-4 | NuSil Silicone Technology 1 | R-1008-4 is an orange, one part, flowable silicone elastomer dispersion that cures in 7 days at room temperature when exposed to atmospheric moisture. It can be used as a marking ink for silicone rubber parts and other components where the coating must ma...展开 R-1008-4 is an orange, one part, flowable silicone elastomer dispersion that cures in 7 days at room temperature when exposed to atmospheric moisture. It can be used as a marking ink for silicone rubber parts and other components where the coating must maintain long term stability. It is best used for applications that require an operating temperature of 65°C to 260°C (-85°F to 465°F). 收起 |
