KRATON® D1163 PTM Polymer | Kraton Polymers International Ltd. | KRATON® D1163 PTM Polymer is a clear, linear triblock copolymer based on styrene and isoprene, with a polystyrene content of 15%. It is supplied as dusted powder. This product is versatile with a combination of high strength, low hardness, and low viscosi...展开 KRATON® D1163 PTM Polymer is a clear, linear triblock copolymer based on styrene and isoprene, with a polystyrene content of 15%. It is supplied as dusted powder. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1163 PTM Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
KRATON® D1164 PT Polymer | Kraton Polymers International Ltd. | KRATON® D1164 PT Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 29%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low vi...展开 KRATON® D1164 PT Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 29%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1164 PT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
KRATON® D1165 PT Polymer | Kraton Polymers International Ltd. | KRATON® D1165 PT Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 30%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low vi...展开 KRATON® D1165 PT Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 30%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1165 PT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
KRATON® D1170 BT Polymer | Kraton Polymers International Ltd. | KRATON® D1170 BT Polymer is a clear, linear triblock copolymer based on styrene, butadiene and isoprene with a polystyrene content of 19%. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, lo...展开 KRATON® D1170 BT Polymer is a clear, linear triblock copolymer based on styrene, butadiene and isoprene with a polystyrene content of 19%. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1170 BT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
KRATON® D1171 PT Polymer | Kraton Polymers International Ltd. | KRATON® D1171 PT Polymer is a clear, linear triblock copolymer based on styrene, butadiene and isoprene with a polystyrene content of 19%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness,...展开 KRATON® D1171 PT Polymer is a clear, linear triblock copolymer based on styrene, butadiene and isoprene with a polystyrene content of 19%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1171 PT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, and hot melt adhesives. 收起 | |
KRATON® D1173 BT Polymer | Kraton Polymers International Ltd. | KRATON® D1173 BT Polymer is a clear, linear triblock copolymer based on styrene, butadiene and isoprene with a polystyrene content of 18%. It is supplied as dusted porous pellets. This product is versatile with a combination of high strength, low hardness...展开 KRATON® D1173 BT Polymer is a clear, linear triblock copolymer based on styrene, butadiene and isoprene with a polystyrene content of 18%. It is supplied as dusted porous pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1173 BT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, and hot melt adhesives. 收起 | |
KRATON® D1183 BT Polymer | Kraton Polymers International Ltd. | KRATON® D1183 BT Polymer is a clear, linear block copolymer based on styrene and isoprene with a polystyrene content of 16%. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, low hardness, an...展开 KRATON® D1183 BT Polymer is a clear, linear block copolymer based on styrene and isoprene with a polystyrene content of 16%. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1183 BT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
KRATON® D1183 PT Polymer | Kraton Polymers International Ltd. | KRATON® D1183 PT Polymer is a clear, linear block copolymer based on styrene and isoprene with a polystyrene content of 16%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low visco...展开 KRATON® D1183 PT Polymer is a clear, linear block copolymer based on styrene and isoprene with a polystyrene content of 16%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1183 PT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
KRATON® D1184 AIM Polymer | Kraton Polymers International Ltd. | KRATON® D1184 AIM Polymer is a clear, branched block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as powder dusted with calcium carbonate. This product is versatile with a combination of high strength, wide range...展开 KRATON® D1184 AIM Polymer is a clear, branched block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as powder dusted with calcium carbonate. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1184 AIM Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
KRATON® D1184 AS Polymer | Kraton Polymers International Ltd. | KRATON® D1184 AS Polymer is a clear, branched block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide...展开 KRATON® D1184 AS Polymer is a clear, branched block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1184 AS Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
KRATON® D1184 ASM Polymer | Kraton Polymers International Ltd. | KRATON® D1184 ASM Polymer is a clear, branched block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as powder dusted with amorphous silica. This product is versatile with a combination of high strength, wide range ...展开 KRATON® D1184 ASM Polymer is a clear, branched block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as powder dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1184 ASM Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
KRATON® D1184 AT Polymer | Kraton Polymers International Ltd. | KRATON® D1184 AT Polymer is a clear, branched block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of ha...展开 KRATON® D1184 AT Polymer is a clear, branched block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1184 AT Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
KRATON® D1184 ES Polymer | Kraton Polymers International Ltd. | KRATON® D1184 ES Polymer is a clear, branched block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide...展开 KRATON® D1184 ES Polymer is a clear, branched block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1184 ES Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, road and pipe coatings, and sealants. 收起 | |
KRATON® D1184 ESM Polymer | Kraton Polymers International Ltd. | KRATON® D1184 ESM Polymer is a clear, branched block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as powder dusted with amorphous silica. This product is versatile with a combination of high strength, wide range ...展开 KRATON® D1184 ESM Polymer is a clear, branched block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as powder dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1184 ESM Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, road and pipe coatings, and sealants. 收起 | |
KRATON® D1184 ET Polymer | Kraton Polymers International Ltd. | KRATON® D1184 ET Polymer is a clear, branched block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of ha...展开 KRATON® D1184 ET Polymer is a clear, branched block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1184 ET Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, road and pipe coatings, and sealants. 收起 | |
KRATON® D1184 KIM Polymer | Kraton Polymers International Ltd. | KRATON® D1184 KIM Polymer is a clear, branched triblock copolymer based on styrene and butadiene, with a polystyrene content of 31%. It is supplied as dusted powder. This product is versatile with a combination of high strength, wide range of hardness, an...展开 KRATON® D1184 KIM Polymer is a clear, branched triblock copolymer based on styrene and butadiene, with a polystyrene content of 31%. It is supplied as dusted powder. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1184 KIM Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
KRATON® D1184 KT Polymer | Kraton Polymers International Ltd. | KRATON® D1184 KT Polymer is a clear, branched triblock copolymer based on styrene and butadiene, with a polystyrene content of 31%. It is supplied as dusted porous pellets. This product is versatile with a combination of high strength, wide range of hardn...展开 KRATON® D1184 KT Polymer is a clear, branched triblock copolymer based on styrene and butadiene, with a polystyrene content of 31%. It is supplied as dusted porous pellets. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1184 KT Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
KRATON® D1184 KU Polymer | Kraton Polymers International Ltd. | KRATON® D1184 KU Polymer is a clear, branched triblock copolymer based on styrene and butadiene, with a polystyrene content of 31%. It is supplied as non-dusted porous pellets. This product is versatile with a combination of high strength, wide range of h...展开 KRATON® D1184 KU Polymer is a clear, branched triblock copolymer based on styrene and butadiene, with a polystyrene content of 31%. It is supplied as non-dusted porous pellets. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1184 KU Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
KRATON® D1186 AS Polymer | Kraton Polymers International Ltd. | KRATON® D1186 AS Polymer is a clear, branched block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide...展开 KRATON® D1186 AS Polymer is a clear, branched block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1186 AS Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, road and pipe coatings, and sealants. 收起 | |
KRATON® D1186 ASM Polymer | Kraton Polymers International Ltd. | KRATON® D1186 ASM Polymer is a clear, branched block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as powder dusted with amorphous silica. This product is versatile with a combination of high strength, wide range ...展开 KRATON® D1186 ASM Polymer is a clear, branched block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as powder dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1186 ASM Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, road and pipe coatings, and sealants. 收起 | |
KRATON® D1186 AT Polymer | Kraton Polymers International Ltd. | KRATON® D1186 AT Polymer is a clear, branched block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of ha...展开 KRATON® D1186 AT Polymer is a clear, branched block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1186 AT Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, road and pipe coatings, and sealants. 收起 | |
KRATON® D1186 BT Polymer | Kraton Polymers International Ltd. | KRATON® D1186 BT Polymer is a clear, branched triblock copolymer based on styrene and butadiene with a polystyrene content of 30%. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range...展开 KRATON® D1186 BT Polymer is a clear, branched triblock copolymer based on styrene and butadiene with a polystyrene content of 30%. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1186 BT Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
KRATON® D1186 ES Polymer | Kraton Polymers International Ltd. | KRATON® D1186 ES Polymer is a clear, branched block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide...展开 KRATON® D1186 ES Polymer is a clear, branched block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1186 ES Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
KRATON® D1186 ESM Polymer | Kraton Polymers International Ltd. | KRATON® D1186 ESM Polymer is a clear, branched block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as powder dusted with amorphous silica. This product is versatile with a combination of high strength, wide range ...展开 KRATON® D1186 ESM Polymer is a clear, branched block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as powder dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1186 ESM Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
KRATON® D1186 ET Polymer | Kraton Polymers International Ltd. | KRATON® D1186 ET Polymer is a clear, branched block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of ha...展开 KRATON® D1186 ET Polymer is a clear, branched block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1186 ET Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
KRATON® D1189 AS Polymer | Kraton Polymers International Ltd. | KRATON® D1189 AS Polymer is a clear, radial block copolymer based on styrene and butadiene with bound styrene of 32% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide r...展开 KRATON® D1189 AS Polymer is a clear, radial block copolymer based on styrene and butadiene with bound styrene of 32% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1189 AS Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
KRATON® D1189 ASM Polymer | Kraton Polymers International Ltd. | KRATON® D1189 ASM Polymer is a clear, radial block copolymer based on styrene and butadiene with bound styrene of 32% mass. It is supplied as powder dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of...展开 KRATON® D1189 ASM Polymer is a clear, radial block copolymer based on styrene and butadiene with bound styrene of 32% mass. It is supplied as powder dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1189 ASM Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
KRATON® D1189 AT Polymer | Kraton Polymers International Ltd. | KRATON® D1189 AT Polymer is a clear, radial block copolymer based on styrene and butadiene with bound styrene of 32% mass. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of hard...展开 KRATON® D1189 AT Polymer is a clear, radial block copolymer based on styrene and butadiene with bound styrene of 32% mass. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1189 AT Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
KRATON® D1189 ES Polymer | Kraton Polymers International Ltd. | KRATON® D1189 ES Polymer is a clear, radial block copolymer based on styrene and butadiene with bound styrene of 32% mass. It is supplied as a porous pellet dusted with an amorphous silica. This product is versatile with a combination of high strength, wi...展开 KRATON® D1189 ES Polymer is a clear, radial block copolymer based on styrene and butadiene with bound styrene of 32% mass. It is supplied as a porous pellet dusted with an amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1189 ES Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, sealants, and coatings. 收起 | |
KRATON® D1189 ESM Polymer | Kraton Polymers International Ltd. | KRATON® D1189 ESM Polymer is a clear, radial block copolymer based on styrene and butadiene with bound styrene of 32% mass. It is supplied as a powder dusted with an amorphous silica. This product is versatile with a combination of high strength, wide ran...展开 KRATON® D1189 ESM Polymer is a clear, radial block copolymer based on styrene and butadiene with bound styrene of 32% mass. It is supplied as a powder dusted with an amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1189 ESM Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, sealants, and coatings. 收起 | |
KRATON® D1191 EIM Polymer | Kraton Polymers International Ltd. | KRATON® D1191 EIM Polymer is a clear, radial block copolymer based on styrene and butadiene with bound styrene of 33.5% mass. It is supplied as powder dusted with calcium carbonate. This product is versatile with a combination of high strength, wide range...展开 KRATON® D1191 EIM Polymer is a clear, radial block copolymer based on styrene and butadiene with bound styrene of 33.5% mass. It is supplied as powder dusted with calcium carbonate. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1191 EIM Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, sealants, and coatings. 收起 | |
KRATON® D1191 ES Polymer | Kraton Polymers International Ltd. | KRATON® D1191 ES Polymer is a clear, radial block copolymer based on styrene and butadiene with bound styrene of 33.5% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide...展开 KRATON® D1191 ES Polymer is a clear, radial block copolymer based on styrene and butadiene with bound styrene of 33.5% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1191 ES Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, sealants, and coatings. 收起 | |
KRATON® D1191 ESM Polymer | Kraton Polymers International Ltd. | KRATON® D1191 ESM Polymer is a clear, radial block copolymer based on styrene and butadiene with bound styrene of 33.5% mass. It is supplied as powder dusted with amorphous silica. This product is versatile with a combination of high strength, wide range ...展开 KRATON® D1191 ESM Polymer is a clear, radial block copolymer based on styrene and butadiene with bound styrene of 33.5% mass. It is supplied as powder dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1191 ESM Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, sealants, and coatings. 收起 | |
KRATON® D1191 ET Polymer | Kraton Polymers International Ltd. | KRATON® D1191 ET Polymer is a clear, radial block copolymer based on styrene and butadiene with bound styrene of 33.5% mass. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of ha...展开 KRATON® D1191 ET Polymer is a clear, radial block copolymer based on styrene and butadiene with bound styrene of 33.5% mass. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1191 ET Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, sealants, and coatings. 收起 | |
KRATON® D1192 AS Polymer | Kraton Polymers International Ltd. | KRATON® D1192 AS Polymer is a clear linear block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide ra...展开 KRATON® D1192 AS Polymer is a clear linear block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1192 AS Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
KRATON® D1192 ASM Polymer | Kraton Polymers International Ltd. | KRATON® D1192 ASM Polymer is a clear linear block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as powder dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of ...展开 KRATON® D1192 ASM Polymer is a clear linear block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as powder dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1192 ASM Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
KRATON® D1192 AT Polymer | Kraton Polymers International Ltd. | KRATON® D1192 AT Polymer is a clear linear block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of hardn...展开 KRATON® D1192 AT Polymer is a clear linear block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1192 AT Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
KRATON® D1192 ATM Polymer | Kraton Polymers International Ltd. | KRATON® D1192 ATM Polymer is a clear linear block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as powder dusted with talc. This product is versatile with a combination of high strength, wide range of hardness, an...展开 KRATON® D1192 ATM Polymer is a clear linear block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as powder dusted with talc. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1192 ATM Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
KRATON® D1192 BT Polymer | Kraton Polymers International Ltd. | KRATON® D1192 BT Polymer is a clear linear block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of hardn...展开 KRATON® D1192 BT Polymer is a clear linear block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1192 BT Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
KRATON® D1192 ES Polymer | Kraton Polymers International Ltd. | KRATON® D1192 ES Polymer is a clear linear block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide ra...展开 KRATON® D1192 ES Polymer is a clear linear block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1192 ES Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
KRATON® D1192 ESM Polymer | Kraton Polymers International Ltd. | KRATON® D1192 ESM Polymer is a clear linear block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as powder dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of ...展开 KRATON® D1192 ESM Polymer is a clear linear block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as powder dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1192 ESM Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
KRATON® D1192 ET Polymer | Kraton Polymers International Ltd. | KRATON® D1192 ET Polymer is a clear linear block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of hardn...展开 KRATON® D1192 ET Polymer is a clear linear block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1192 ET Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
KRATON® D1192 ETM Polymer | Kraton Polymers International Ltd. | KRATON® D1192 ETM Polymer is a clear linear block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as powder dusted with talc. This product is versatile with a combination of high strength, wide range of hardness, an...展开 KRATON® D1192 ETM Polymer is a clear linear block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as powder dusted with talc. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1192 ETM Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
KRATON® D1193 PT Polymer | Kraton Polymers International Ltd. | KRATON® D1193 PT Polymer is a clear, linear triblock copolymer based on styrene and isoprene, with a polystyrene content of 24%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low v...展开 KRATON® D1193 PT Polymer is a clear, linear triblock copolymer based on styrene and isoprene, with a polystyrene content of 24%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1193 PT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
KRATON® D2104 DI-N Polymer | Kraton Polymers International Ltd. | KRATON® D2104 DI-N Polymer is an easy processing, general purpose material designed for a wide variety of applications. It is supplied as translucent dense pellets. This product is versatile with a combination of high strength, wide range of hardness, and...展开 KRATON® D2104 DI-N Polymer is an easy processing, general purpose material designed for a wide variety of applications. It is supplied as translucent dense pellets. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D2104 DI-N Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
KRATON® D2104 DO-N Polymer | Kraton Polymers International Ltd. | KRATON® D2104 DO-N Polymer is an easy processing, 50 Shore A hardness material designed for film applications. It is supplied as natural color pellets. This product is versatile with a combination of high strength, wide range of hardness, and low viscosit...展开 KRATON® D2104 DO-N Polymer is an easy processing, 50 Shore A hardness material designed for film applications. It is supplied as natural color pellets. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D2104 DO-N Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
KRATON® D2104 DS-W Polymer | Kraton Polymers International Ltd. | KRATON® D2104 DS-W Polymer is an easy processing, general purpose 45 Shore A hardness material designed for a wide variety of applications. It is supplied as dense, white pellets. This product is versatile with a combination of high strength, wide range o...展开 KRATON® D2104 DS-W Polymer is an easy processing, general purpose 45 Shore A hardness material designed for a wide variety of applications. It is supplied as dense, white pellets. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D2104 DS-W Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
KRATON® D2109 DS-N Compound | Kraton Polymers International Ltd. | KRATON® D2109 DS-N Compound is an easy processing, general purpose 45 Shore A hardness material designed for a wide variety of applications. It is supplied as a translucent dense pellet. This product is versatile with a combination of high strength, wide ...展开 KRATON® D2109 DS-N Compound is an easy processing, general purpose 45 Shore A hardness material designed for a wide variety of applications. It is supplied as a translucent dense pellet. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D2109 DS-N Compound is used in pressure sensitive adhesives, hot melt spray diaper adhesives, and construction adhesives. 收起 | |
KRATON® D3158 DT-B Polymer | Kraton Polymers International Ltd. | KRATON® D3158 DT-B Polymer is a branched copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied as dusted, porous pellets. This product is versatile with a combination of high strength, wide range of hardness, and low v...展开 KRATON® D3158 DT-B Polymer is a branched copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied as dusted, porous pellets. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D3158 DT-B Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
KRATON® D3226 DI Polymer | Kraton Polymers International Ltd. | KRATON® D3226 DI Polymer is an easy processing material designed for a wide variety of applications. It is supplied as natural color pellets. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy...展开 KRATON® D3226 DI Polymer is an easy processing material designed for a wide variety of applications. It is supplied as natural color pellets. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D3226 DI Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
KRATON® D4150 KT Polymer | Kraton Polymers International Ltd. | KRATON® D4150 KT Polymeris a linear triblock copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied as dusted porous pellets. This product is versatile with a combination of high strength, wide range of hardness, and lo...展开 KRATON® D4150 KT Polymeris a linear triblock copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied as dusted porous pellets. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D4150 KT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
KRATON® D4150 KU Polymer | Kraton Polymers International Ltd. | KRATON® D4150 KU Polymer is a linear triblock copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied as non-dusted porous pellets. This product is versatile with a combination of high strength, wide range of hardness, a...展开 KRATON® D4150 KU Polymer is a linear triblock copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied as non-dusted porous pellets. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D4150 KU Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
KRATON® D4153 ES Polymer | Kraton Polymers International Ltd. | KRATON® D4153 ES Polymer is an oil-extended linear block copolymer based on styrene and butadiene with bound styrene in the neat polymer of 35% mass. It is supplied as porous pellets dusted with an amorphous silica. This product is versatile with a combin...展开 KRATON® D4153 ES Polymer is an oil-extended linear block copolymer based on styrene and butadiene with bound styrene in the neat polymer of 35% mass. It is supplied as porous pellets dusted with an amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D4153 ES Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
KRATON® D4153 ESM Polymer | Kraton Polymers International Ltd. | KRATON® D4153 ESM Polymer is an oil-extended linear block copolymer based on styrene and butadiene with bound styrene in the neat polymer of 35% mass. It is supplied as powder dusted with an amorphous silica. This product is versatile with a combination o...展开 KRATON® D4153 ESM Polymer is an oil-extended linear block copolymer based on styrene and butadiene with bound styrene in the neat polymer of 35% mass. It is supplied as powder dusted with an amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D4153 ESM Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
KRATON® D4158 KT Polymer | Kraton Polymers International Ltd. | KRATON® D4158 KT Polymer is an oiled, radial copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied as dusted porous pellets. This product is versatile with a combination of high strength, wide range of hardness, and lo...展开 KRATON® D4158 KT Polymer is an oiled, radial copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied as dusted porous pellets. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D4158 KT Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
KRATON® D4158 KU Polymer | Kraton Polymers International Ltd. | KRATON® D4158 KU Polymer is an oiled, radial copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied as non-dusted porous pellets. This product is versatile with a combination of high strength, wide range of hardness, an...展开 KRATON® D4158 KU Polymer is an oiled, radial copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied as non-dusted porous pellets. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D4158 KU Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
KRATON® D4270 JS Polymer | Kraton Polymers International Ltd. | KRATON® D4270 JS Polymer is an oil-extended branched block copolymer based on styrene and butadiene, with bound styrene in the neat polymer of 32% mass. It is supplied as dusted crumbs. This product is versatile with a combination of high strength, wide r...展开 KRATON® D4270 JS Polymer is an oil-extended branched block copolymer based on styrene and butadiene, with bound styrene in the neat polymer of 32% mass. It is supplied as dusted crumbs. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D4270 JS Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, and construction adhesives. 收起 | |
KRATON® D4270 JSP Polymer | Kraton Polymers International Ltd. | KRATON® D4270 JSP Polymer is an oil-extended branched block copolymer based on styrene and butadiene, with bound styrene in the neat polymer of 32% mass. It is supplied as dusted pellets. This product is versatile with a combination of high strength, wide...展开 KRATON® D4270 JSP Polymer is an oil-extended branched block copolymer based on styrene and butadiene, with bound styrene in the neat polymer of 32% mass. It is supplied as dusted pellets. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D4270 JSP Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, and construction adhesives. 收起 | |
KRATON® D4271 JS Polymer | Kraton Polymers International Ltd. | KRATON® D4271 JS Polymer is an oil-extended branched block copolymer based on styrene and butadiene, with bound styrene of 45% mass. It is supplied as dusted crumbs. This product is versatile with a combination of high strength, wide range of hardness, an...展开 KRATON® D4271 JS Polymer is an oil-extended branched block copolymer based on styrene and butadiene, with bound styrene of 45% mass. It is supplied as dusted crumbs. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D4271 JS Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, and construction adhesives. 收起 | |
KRATON® D4271 JSP Polymer | Kraton Polymers International Ltd. | KRATON® D4271 JSP Polymer is an oil-extended branched block copolymer based on styrene and butadiene, with bound styrene of 45% mass. It is supplied as dusted pellets. This product is versatile with a combination of high strength, wide range of hardness, ...展开 KRATON® D4271 JSP Polymer is an oil-extended branched block copolymer based on styrene and butadiene, with bound styrene of 45% mass. It is supplied as dusted pellets. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D4271 JSP Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, and construction adhesives. 收起 | |
KRATON® DX1000 AU Polymer | Kraton Polymers International Ltd. | KRATON® DX1000 AU Polymer is a clear, diblock copolymer based on styrene and butadiene with bound styrene of 9% mass. It is supplied as non-dusted porous pellets. This product is versatile with a combination of high strength, wide range of hardness, and l...展开 KRATON® DX1000 AU Polymer is a clear, diblock copolymer based on styrene and butadiene with bound styrene of 9% mass. It is supplied as non-dusted porous pellets. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® DX1000 AU Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
KRATON® FG1901 GT Polymer | Kraton Polymers International Ltd. | KRATON® FG1901 GT Polymer is a clear, linear triblock copolymer based on styrene and ethylene/butylene with a polystyrene content of 30%. It is supplied as dusted pellets. This product is used in the production of adhesives for nylon, polyester, ethylene ...展开 KRATON® FG1901 GT Polymer is a clear, linear triblock copolymer based on styrene and ethylene/butylene with a polystyrene content of 30%. It is supplied as dusted pellets. This product is used in the production of adhesives for nylon, polyester, ethylene vinyl alcohol, aluminum, steel, glass, and many other substrates. KRATON® FG1901 GT Polymer is used in adhesives, coatings, and sealants. 收起 | |
KRATON® FG1924 GT Polymer | Kraton Polymers International Ltd. | KRATON® FG1924 GT Polymer is a clear, linear triblock copolymer based on styrene and ethylene/butylene with a polystyrene content of 13%. It is supplied as dusted pellets. This product is used in the production of adhesives for nylon, polyester, ethylene ...展开 KRATON® FG1924 GT Polymer is a clear, linear triblock copolymer based on styrene and ethylene/butylene with a polystyrene content of 13%. It is supplied as dusted pellets. This product is used in the production of adhesives for nylon, polyester, ethylene vinyl alcohol, aluminum, steel, glass, and many other substrates. KRATON® FG1924 GT Polymer is used in adhesives, coatings, and sealants. 收起 | |
NIKANE® MS 3000 | ANGUS Chemical Company 安格斯化学公司 | 一种性能独特的多功能溶剂,用于构成多种工业保养涂料体系中的溶剂型还原剂和冲淡剂。 | |
NIKANE® MS 5000 | ANGUS Chemical Company 安格斯化学公司 | 一种多功能溶剂,在溶剂型体系中有独特的性能。不但能够轻易地溶解各种材料,而且能够赋予溶解液以特性,因此得到了广泛的应用。 | |
Thomide 423 | Sanho Chemical Co., Ltd. | Thomide 423 is a polyamide-adduct type epoxy resin curing agent in a brown-colored viscous liquid form. This product has a total solids content of 58-62%. Thomide 423 is most commonly used in fast-curing paint formulation applications. | |
Tohmide 1310 | Sanho Chemical Co., Ltd. | Tohmide 1310 is a high molecular weight polyamide resin in a brown-colored pellet form. This product has a viscosity of 1500-4500 mPa.s and a softening point of 115-125°C. Tohmide 1310 is most commonly used in hot-melt adhesive formulation applications. | |
Tohmide 1360 | Sanho Chemical Co., Ltd. | Tohmide 1360 is a high molecular weight polyamide resin in a brown-colored pellet form. This product has a viscosity of 1500-4500 mPa.s and a softening point of 165-175°C. Tohmide 1360 is most commonly used in hot-melt adhesive formulation applications. | |
Tohmide 213-A | Sanho Chemical Co., Ltd. | Tohmide 213-A is a reactive polyamide epoxy resin curing agent in a yellow-brown-colored viscous liquid form. This product has a total solids content of 48-52%. Tohmide 213-A is most commonly used in fast-curing paint formulation applications. | |
Tohmide 215-70X | Sanho Chemical Co., Ltd. | Tohmide 215-70X is a reactive polyamide epoxy resin curing agent in a brown-colored viscous liquid form. This product has a total solids content of 68-72%. Tohmide 215-70X is most commonly used in fast-curing paint formulation applications. | |
Tohmide 215-X | Sanho Chemical Co., Ltd. | Tohmide 215-X is a polyaminoamide-type epoxy curing agent in a brown-colored viscous liquid form. This product has a viscosity of 50,000-70,000 mPa.s and a specific gravity of 0.97. Tohmide 215-X is most commonly used in coating formulation applications. | |
Tohmide 225-R | Sanho Chemical Co., Ltd. | Tohmide 225-R is a medium viscosity, reactive polyaminoamide in a brown-colored viscous liquid form. This product has a viscosity of 3500-10,000 mPa.s and a specific gravity of 0.97. Tohmide 225-R is most commonly used in adhesive, sealant, putty, and sur...展开 Tohmide 225-R is a medium viscosity, reactive polyaminoamide in a brown-colored viscous liquid form. This product has a viscosity of 3500-10,000 mPa.s and a specific gravity of 0.97. Tohmide 225-R is most commonly used in adhesive, sealant, putty, and surface coating formulation applications. 收起 | |
Tohmide 225-X | Sanho Chemical Co., Ltd. | Tohmide 225-X is a polyaminoamide-type epoxy curing agent in a brown-colored viscous liquid form. This product has a viscosity of 8000-12,000 mPa.s and a specific gravity of 0.97. Tohmide 225-X is most commonly used in adhesive, sealant, and surface coati...展开 Tohmide 225-X is a polyaminoamide-type epoxy curing agent in a brown-colored viscous liquid form. This product has a viscosity of 8000-12,000 mPa.s and a specific gravity of 0.97. Tohmide 225-X is most commonly used in adhesive, sealant, and surface coating formulation applications. 收起 | |
Tohmide 225-XX | Sanho Chemical Co., Ltd. | Tohmide 225-XX is a polyaminoamide-type epoxy curing agent with a longer pot life in a brown-colored viscous liquid form. This product has a viscosity of 8000-12,000 mPa.s and a specific gravity of 0.97. Tohmide 225-XX is most commonly used in adhesive, s...展开 Tohmide 225-XX is a polyaminoamide-type epoxy curing agent with a longer pot life in a brown-colored viscous liquid form. This product has a viscosity of 8000-12,000 mPa.s and a specific gravity of 0.97. Tohmide 225-XX is most commonly used in adhesive, sealant, and surface coating formulation applications. 收起 | |
Tohmide 235-A | Sanho Chemical Co., Ltd. | Tohmide 235-A is a polyaminoamide-type epoxy curing agent in a brown-colored viscous liquid form. This product has a viscosity of 8000-18,000 mPa.s and a specific gravity of 0.97. TOHMIDE 235-A is most commonly used in structural adhesive and grout formul...展开 Tohmide 235-A is a polyaminoamide-type epoxy curing agent in a brown-colored viscous liquid form. This product has a viscosity of 8000-18,000 mPa.s and a specific gravity of 0.97. TOHMIDE 235-A is most commonly used in structural adhesive and grout formulation applications. 收起 | |
Tohmide 235-S | Sanho Chemical Co., Ltd. | Tohmide 235-S is a medium viscosity, polyaminoamide-type epoxy curing agent in a brown-colored viscous liquid form. This product has a viscosity of 4500-9000 mPa.s and a specific gravity of 0.97. Tohmide 235-S is most commonly used in structural adhesive ...展开 Tohmide 235-S is a medium viscosity, polyaminoamide-type epoxy curing agent in a brown-colored viscous liquid form. This product has a viscosity of 4500-9000 mPa.s and a specific gravity of 0.97. Tohmide 235-S is most commonly used in structural adhesive and grout formulation applications. 收起 | |
Tohmide 2400 | Sanho Chemical Co., Ltd. | Tohmide 2400 is a low viscosity, reactive polyamide hardener in a brown-colored viscous liquid form. This product has a viscosity of 2500-5000 mPa.s and a specific gravity of 0.97. Tohmide 2400 is most commonly used in medium heat adhesive formulation app...展开 Tohmide 2400 is a low viscosity, reactive polyamide hardener in a brown-colored viscous liquid form. This product has a viscosity of 2500-5000 mPa.s and a specific gravity of 0.97. Tohmide 2400 is most commonly used in medium heat adhesive formulation applications. 收起 | |
Tohmide 245 | Sanho Chemical Co., Ltd. | Tohmide 245 is a polyaminoamide-type epoxy curing agent in a brown-colored liquid form. This product has a viscosity of 1500-3000 mPa.s and a specific gravity of 0.96. Tohmide 245 is most commonly used in bonding, sealing, and resin mortar formulation app...展开 Tohmide 245 is a polyaminoamide-type epoxy curing agent in a brown-colored liquid form. This product has a viscosity of 1500-3000 mPa.s and a specific gravity of 0.96. Tohmide 245 is most commonly used in bonding, sealing, and resin mortar formulation applications. 收起 | |
Tohmide 245-HS | Sanho Chemical Co., Ltd. | Tohmide 245-HS is a very low viscosity, fatty polyamide resin in a brown-colored viscous liquid form. This product has a viscosity of 800-1100 cPs. Tohmide 245-HS is most commonly used in structural adhesive and protective coating formulation applications...展开 Tohmide 245-HS is a very low viscosity, fatty polyamide resin in a brown-colored viscous liquid form. This product has a viscosity of 800-1100 cPs. Tohmide 245-HS is most commonly used in structural adhesive and protective coating formulation applications. 收起 | |
Tohmide 245-LP | Sanho Chemical Co., Ltd. | Tohmide 245-LP is a low viscosity, polyaminoamide epoxy curing agent in a brown-colored liquid form. This product has a viscosity of 200-500 mPa.s and a specific gravity of 0.90. Tohmide 245-LP is most commonly used in structural adhesive and protective c...展开 Tohmide 245-LP is a low viscosity, polyaminoamide epoxy curing agent in a brown-colored liquid form. This product has a viscosity of 200-500 mPa.s and a specific gravity of 0.90. Tohmide 245-LP is most commonly used in structural adhesive and protective coating formulation applications. 收起 | |
Tohmide 245-S | Sanho Chemical Co., Ltd. | Tohmide 245-S is a polyaminoamide epoxy curing agent in a brown-colored liquid form. This product has a viscosity of 1000-2500 mPa.s and a specific gravity of 0.96. Tohmide 245-S is most commonly used in bonding, sealing, and resin mortar formulation appl...展开 Tohmide 245-S is a polyaminoamide epoxy curing agent in a brown-colored liquid form. This product has a viscosity of 1000-2500 mPa.s and a specific gravity of 0.96. Tohmide 245-S is most commonly used in bonding, sealing, and resin mortar formulation applications. 收起 | |
Tohmide 2500 | Sanho Chemical Co., Ltd. | Tohmide 2500 is a low viscosity, reactive polyamide hardener in a brown-colored viscous liquid form. This product has a viscosity of 500-1000 mPa.s and a specific gravity of 0.95. Tohmide 2500 is most commonly used in heat curing adhesive formulation appl...展开 Tohmide 2500 is a low viscosity, reactive polyamide hardener in a brown-colored viscous liquid form. This product has a viscosity of 500-1000 mPa.s and a specific gravity of 0.95. Tohmide 2500 is most commonly used in heat curing adhesive formulation applications. 收起 | |
Tohmide 252 | Sanho Chemical Co., Ltd. | Tohmide 252 is a polyaminoamide epoxy curing agent in a brown-colored liquid form. This product has a viscosity of 100-400 mPa.s and a specific gravity of 0.96. Tohmide 252 is most commonly used in adhesive formulation applications. | |
Tohmide 255 | Sanho Chemical Co., Ltd. | Tohmide 255 is a low viscosity, fast setting, reactive polyamide hardener in a brown-colored viscous liquid form. This product has a viscosity of 300-600 mPa.s and a specific gravity of 0.97. Tohmide 255 is most commonly used in reactive epoxy lining and ...展开 Tohmide 255 is a low viscosity, fast setting, reactive polyamide hardener in a brown-colored viscous liquid form. This product has a viscosity of 300-600 mPa.s and a specific gravity of 0.97. Tohmide 255 is most commonly used in reactive epoxy lining and thin bonding mortar formulation applications. 收起 | |
Tohmide 275 | Sanho Chemical Co., Ltd. | Tohmide 275 is a low viscosity, fast setting, reactive polyamide hardener in a brown-colored viscous liquid form. This product has a viscosity of 1200-3200 mPa.s and a specific gravity of 1.02. Tohmide 275 is most commonly used in coating and adhesive for...展开 Tohmide 275 is a low viscosity, fast setting, reactive polyamide hardener in a brown-colored viscous liquid form. This product has a viscosity of 1200-3200 mPa.s and a specific gravity of 1.02. Tohmide 275 is most commonly used in coating and adhesive formulation applications. 收起 | |
Tohmide 280-B | Sanho Chemical Co., Ltd. | Tohmide 280-B is a low viscosity, fast setting, reactive polyamide hardener in a brown-colored viscous liquid form. This product has a viscosity of 500-1000 mPa.s and a specific gravity of 0.96. Tohmide 280-B is most commonly used in sealant and adhesive ...展开 Tohmide 280-B is a low viscosity, fast setting, reactive polyamide hardener in a brown-colored viscous liquid form. This product has a viscosity of 500-1000 mPa.s and a specific gravity of 0.96. Tohmide 280-B is most commonly used in sealant and adhesive formulation applications. 收起 | |
Tohmide 390 | Sanho Chemical Co., Ltd. | Tohmide 390 is a solid-type polyamide resin in a brown pellet form. This product has a viscosity of 200-400 mPa.s and a softening point of 175-185°C. Tohmide 390 is most commonly used in hot-melt structural adhesive formulation applications. | |
Tohmide 393 | Sanho Chemical Co., Ltd. | Tohmide 393 is a fatty polyamide resin in a brown-yellow pellet form. This product has a softening point of 110-120°C. Tohmide 393 is most commonly used in rotogravure printing ink and varnish formulation applications. | |
Tohmide 394 | Sanho Chemical Co., Ltd. | Tohmide 394 is a solid-type fatty polyamide resin in a brown pellet form. This product has a viscosity of 500-1000 mPa.s and a softening point of 105-115°C. Tohmide 394 is most commonly used in hot-melt structural adhesive formulation applications. | |
Tohmide 394-N | Sanho Chemical Co., Ltd. | Tohmide 394-N is a solid-type fatty polyamide resin in a brown-yellow pellet form. This product has a softening point of 105-115°C. Tohmide 394-N is most commonly used in rotogravure printing ink formulation applications. | |
Tohmide 437 | Sanho Chemical Co., Ltd. | Tohmide 437 is a polyamide-adduct type epoxy resin curing agent in a brown-colored viscous liquid form. This product has a total solids content of 73-77%. Tohmide 437 is most commonly used in fast-curing paint formulation applications. | |
Tohmide 441-A | Sanho Chemical Co., Ltd. | Tohmide 441-A is a reactive polyamide epoxy resin curing agent in a brown-colored viscous liquid form. This product has a total solids content of 82-86%. Tohmide 441-A is most commonly used in corrosion resistant paint formulation applications. | |
Tohmide 558 | Sanho Chemical Co., Ltd. | Tohmide 558 is a solid-type fatty polyamide resin in a brown-colored pellet form. This product has a viscosity of 300-850 mPa.s and a softening point of 155-165°C. Tohmide 558 is most commonly used in structural hot-melt adhesive formulation applications. | |
Tohmide 558-N | Sanho Chemical Co., Ltd. | Tohmide 558-N is a solid-type fatty polyamide resin in a brown-colored pellet form. This product has a viscosity of 300-800 mPa.s and a softening point of 155-165°C. Tohmide 558-N is most commonly used in structural hot-melt adhesive formulation applicati...展开 Tohmide 558-N is a solid-type fatty polyamide resin in a brown-colored pellet form. This product has a viscosity of 300-800 mPa.s and a softening point of 155-165°C. Tohmide 558-N is most commonly used in structural hot-melt adhesive formulation applications. 收起 | |
Tohmide 560 | Sanho Chemical Co., Ltd. | Tohmide 560 is a low-melting viscosity polyamide resin in a brown-colored pellet form. This product has a viscosity of 200-400 mPa.s and a softening point of 155-165°C. Tohmide 560 is most commonly used in hot-melt adhesive formulation applications. | |
Tohmide 90 | Sanho Chemical Co., Ltd. | Tohmide 90 is a fatty polyamide resin in a brown-yellow pellet form. This product has a softening point of 105-115°C. Tohmide 90 is most commonly used in rotogravure printing ink formulation applications. | |
Tohmide 92 | Sanho Chemical Co., Ltd. | Tohmide 92 is a fatty polyamide resin in a brown-yellow pellet form. This product has a softening point of 115-125°C. Tohmide 92 is most commonly used in flexographic printing ink formulation applications. | |
Tohmide HR-11 | Sanho Chemical Co., Ltd. | Tohmide HR-11 is a high viscosity, polyaminoamide epoxy curing agent in a brown-colored viscous liquid form. This product has a viscosity of 8000-15,000 mPa.s and a specific gravity of 0.98. Tohmide HR-11 is most commonly used in adhesive formulation appl...展开 Tohmide HR-11 is a high viscosity, polyaminoamide epoxy curing agent in a brown-colored viscous liquid form. This product has a viscosity of 8000-15,000 mPa.s and a specific gravity of 0.98. Tohmide HR-11 is most commonly used in adhesive formulation applications. 收起 | |
Tohmide RS-640 | Sanho Chemical Co., Ltd. | Tohmide RS-640 is a high viscosity, reactive polyamide hardener in a brown-colored viscous liquid form. This product has a viscosity of 10,000-14,000 mPa.s and a specific gravity of 0.96. Tohmide RS-640 is most commonly used in wood adhesive formulation a...展开 Tohmide RS-640 is a high viscosity, reactive polyamide hardener in a brown-colored viscous liquid form. This product has a viscosity of 10,000-14,000 mPa.s and a specific gravity of 0.96. Tohmide RS-640 is most commonly used in wood adhesive formulation applications. 收起 | |
Tohmide TXA-254B | Sanho Chemical Co., Ltd. | Tohmide TXA-254B is a high molecular weight polyamide resin in a brown-colored pellet form. This product has a viscosity of 3500-5500 mPa.s and a softening point of 150-160°C. Tohmide TXA-254B is most commonly used in hot-melt adhesive formulation applica...展开 Tohmide TXA-254B is a high molecular weight polyamide resin in a brown-colored pellet form. This product has a viscosity of 3500-5500 mPa.s and a softening point of 150-160°C. Tohmide TXA-254B is most commonly used in hot-melt adhesive formulation applications. 收起 |