| Cariflex™ IR0307 KU Polymer | Kraton Polymers International Ltd. | Cariflex™ IR0307 KU Polymer is a solution polymerised polyisoprene with a high cis-1,4 content. It is supplied as a white/transparent solid bale. This product has an high molecular weight. Cariflex™ IR0307 KU Polymer is used in adhesives, coatings, and se...展开 Cariflex™ IR0307 KU Polymer is a solution polymerised polyisoprene with a high cis-1,4 content. It is supplied as a white/transparent solid bale. This product has an high molecular weight. Cariflex™ IR0307 KU Polymer is used in adhesives, coatings, and sealants. 收起 | |
| Cariflex™ IR0310 KU Polymer | Kraton Polymers International Ltd. | Cariflex™ IR0310 KU Polymer is a solution polymerised polyisoprene with a high cis-1,4 content. It is supplied as a white/transparent solid bale. This product has an high molecular weight. Cariflex™ IR0310 KU Polymer is used in adhesives, coatings, and se...展开 Cariflex™ IR0310 KU Polymer is a solution polymerised polyisoprene with a high cis-1,4 content. It is supplied as a white/transparent solid bale. This product has an high molecular weight. Cariflex™ IR0310 KU Polymer is used in adhesives, coatings, and sealants. 收起 | |
| Cariflex™ IR0401 BU Latex | Kraton Polymers International Ltd. | Cariflex™ IR0401 BU Latex is a water-based emulsion of an anionically polymerized polyisoprene with a high cis-1,4 content, high molecular weight, and a high linearity. This product has a light color and low levels of impurities. Cariflex™ IR0401 BU Late...展开 Cariflex™ IR0401 BU Latex is a water-based emulsion of an anionically polymerized polyisoprene with a high cis-1,4 content, high molecular weight, and a high linearity. This product has a light color and low levels of impurities. Cariflex™ IR0401 BU Latex is used in adhesives, coatings, and sealants. 收起 | |
| Cariflex™ IR0401 SU Latex | Kraton Polymers International Ltd. | Cariflex™ IR0401 SU Latex is a water-based emulsion of an anionically polymerized polyisoprene with a high cis-1,4 content, high molecular weight and a high linearity. This product has a light color and low levels of impurities. Cariflex™ IR0401 SU Latex ...展开 Cariflex™ IR0401 SU Latex is a water-based emulsion of an anionically polymerized polyisoprene with a high cis-1,4 content, high molecular weight and a high linearity. This product has a light color and low levels of impurities. Cariflex™ IR0401 SU Latex is used in adhesives, coatings, and sealants. 收起 | |
| Fujicure 205-L | Sanho Chemical Co., Ltd. | Fujicure 205-L is a modified cycloaliphatic curing agent in a light honey-colored liquid form. This product has a viscosity of less than 400-700 mPa.s. Fujicure 205-L is most commonly used in solvent-free paint formulation applications. | |
| Fujicure 4030 | Sanho Chemical Co., Ltd. | Fujicure 4030 is a modified aromatic polyamine epoxy curing agent in a brown-colored viscous liquid form. This product has a total solids content of 66-70%. Fujicure 4030 is most commonly used in epoxy paint formulation applications. | |
| Fujicure 5000 | Sanho Chemical Co., Ltd. | Fujicure 5000 is a low viscosity, modified cycloaliphatic polyamine curing agent in a light yellow-colored viscous liquid form. This product has a viscosity of 800-2500 mPa.s and a specific gravity of 1.02. Fujicure 5000 is most commonly used in adhesive ...展开 Fujicure 5000 is a low viscosity, modified cycloaliphatic polyamine curing agent in a light yellow-colored viscous liquid form. This product has a viscosity of 800-2500 mPa.s and a specific gravity of 1.02. Fujicure 5000 is most commonly used in adhesive and solvent-based coating formulation applications. 收起 | |
| Fujicure 5260 | Sanho Chemical Co., Ltd. | Fujicure 5260 is a modified cycloaliphatic polyamine in a light brown-colored viscous liquid form. This product has a viscosity of 1000-2000 mPa.s and a specific gravity of 1.03. Fujicure 5260 is most commonly used in epoxy mortar formulation applications...展开 Fujicure 5260 is a modified cycloaliphatic polyamine in a light brown-colored viscous liquid form. This product has a viscosity of 1000-2000 mPa.s and a specific gravity of 1.03. Fujicure 5260 is most commonly used in epoxy mortar formulation applications. 收起 | |
| Fujicure 5300 | Sanho Chemical Co., Ltd. | Fujicure 5300 is a modified cycloaliphatic polyamine epoxy curing agent in a light yellow-colored viscous liquid form. This product has a viscosity of 800-1700 mPa.s and a specific gravity of 1.02. Fujicure 5300 is most commonly used in adhesive and self-...展开 Fujicure 5300 is a modified cycloaliphatic polyamine epoxy curing agent in a light yellow-colored viscous liquid form. This product has a viscosity of 800-1700 mPa.s and a specific gravity of 1.02. Fujicure 5300 is most commonly used in adhesive and self-leveling coating formulation applications. 收起 | |
| Fujicure 5420 | Sanho Chemical Co., Ltd. | Fujicure 5420 is a modified cycloaliphatic polyamine epoxy curing agent in a light yellow-colored viscous liquid form. This product has a viscosity of 200-500 mPa.s and a specific gravity of 1.07. Fujicure 5420 is most commonly used in concrete adhesive f...展开 Fujicure 5420 is a modified cycloaliphatic polyamine epoxy curing agent in a light yellow-colored viscous liquid form. This product has a viscosity of 200-500 mPa.s and a specific gravity of 1.07. Fujicure 5420 is most commonly used in concrete adhesive formulation applications. 收起 | |
| Fujicure FX-220 | Sanho Chemical Co., Ltd. | Fujicure FX-220 is a modified cycloaliphatic polyamine epoxy curing agent in a light yellow-colored viscous liquid form. This product has a viscosity of 200-500 mPa.s and a specific gravity of 1.07. Fujicure FX-220 is most commonly used in coating and adh...展开 Fujicure FX-220 is a modified cycloaliphatic polyamine epoxy curing agent in a light yellow-colored viscous liquid form. This product has a viscosity of 200-500 mPa.s and a specific gravity of 1.07. Fujicure FX-220 is most commonly used in coating and adhesive formulation applications. 收起 | |
| Fujicure FXD-821 | Sanho Chemical Co., Ltd. | Fujicure FXD-821 is a modified aliphatic amine hardener in a light yellow-colored liquid form. This product has a viscosity of 40-70 mPa.s and a specific gravity of 0.95. Fujicure FXD-821 is most commonly used in surface coating, resin mortar, and adhesiv...展开 Fujicure FXD-821 is a modified aliphatic amine hardener in a light yellow-colored liquid form. This product has a viscosity of 40-70 mPa.s and a specific gravity of 0.95. Fujicure FXD-821 is most commonly used in surface coating, resin mortar, and adhesive formulation applications. 收起 | |
| Kingcure 2010 | Sanho Chemical Co., Ltd. | Kingcure 2010 is a reactive polyamide epoxy resin curing agent in a light honey-colored viscous liquid form. This product has a viscosity of 1200-2000 mPa.s and a specific gravity of 0.96. Kingcure 2010 is most commonly used in concrete adhesive formulati...展开 Kingcure 2010 is a reactive polyamide epoxy resin curing agent in a light honey-colored viscous liquid form. This product has a viscosity of 1200-2000 mPa.s and a specific gravity of 0.96. Kingcure 2010 is most commonly used in concrete adhesive formulation applications. 收起 | |
| Kingcure 2040-MS | Sanho Chemical Co., Ltd. | Kingcure 2040-MS is a mannish-type epoxy resin hardener in a light honey-colored liquid form. This product has a viscosity of 2000-6000 mPa.s and a specific gravity of 1.08. Kingcure 2040-MS is most commonly used in fast-setting adhesive formulation appli...展开 Kingcure 2040-MS is a mannish-type epoxy resin hardener in a light honey-colored liquid form. This product has a viscosity of 2000-6000 mPa.s and a specific gravity of 1.08. Kingcure 2040-MS is most commonly used in fast-setting adhesive formulation applications. 收起 | |
| Kingcure 515-KD | Sanho Chemical Co., Ltd. | Kingcure 515-KD is a modified cycloaliphatic polyamine adduct curing agent in an amber-colored liquid form. This product has a viscosity of 300-700 mPa.s and a specific gravity of 1.01. Kingcure 515-KD is most commonly used in solvent-free coating and adh...展开 Kingcure 515-KD is a modified cycloaliphatic polyamine adduct curing agent in an amber-colored liquid form. This product has a viscosity of 300-700 mPa.s and a specific gravity of 1.01. Kingcure 515-KD is most commonly used in solvent-free coating and adhesive formulation applications. 收起 | |
| Kingcure 613-B | Sanho Chemical Co., Ltd. | Kingcure 613-B is a rapid room temperature modified polyamine curing agent in a light yellow-colored liquid form. This product has a viscosity of 30-100 mPa.s. Kingcure 613-B is most commonly used in solvent-free coating and adhesive formulation applicati...展开 Kingcure 613-B is a rapid room temperature modified polyamine curing agent in a light yellow-colored liquid form. This product has a viscosity of 30-100 mPa.s. Kingcure 613-B is most commonly used in solvent-free coating and adhesive formulation applications. 收起 | |
| Kingcure 800-S | Sanho Chemical Co., Ltd. | Kingcure 800-S is a mercaptan terminated polymer in a light yellow-colored viscous liquid form. This product has a slower gel time and a viscosity of 10,000-20,000 mPa.s and a specific gravity of 1.13. Kingcure 800-S is most commonly used in mortar and fa...展开 Kingcure 800-S is a mercaptan terminated polymer in a light yellow-colored viscous liquid form. This product has a slower gel time and a viscosity of 10,000-20,000 mPa.s and a specific gravity of 1.13. Kingcure 800-S is most commonly used in mortar and fast-setting adhesive formulation applications. 收起 | |
| Kingcure 925 | Sanho Chemical Co., Ltd. | Kingcure 925 is a low viscosity, modified aliphatic polyamine epoxy curing agent in a light-colored liquid form. This product has a viscosity of less than 80 mPa.s and a specific gravity of 0.95. Kingcure 925 is most commonly used in laminate, mortar, adh...展开 Kingcure 925 is a low viscosity, modified aliphatic polyamine epoxy curing agent in a light-colored liquid form. This product has a viscosity of less than 80 mPa.s and a specific gravity of 0.95. Kingcure 925 is most commonly used in laminate, mortar, adhesive, and coating formulation applications. 收起 | |
| Kingcure A-611 | Sanho Chemical Co., Ltd. | Kingcure A-611 is a modified aliphatic polyamine adduct curing agent in an amber-colored liquid form. This product has a viscosity of 13-25 mPa.s and a specific gravity of 1.09. Kingcure A-611 is most commonly used in adhesive formulation applications. | |
| Kingcure I-631 | Sanho Chemical Co., Ltd. | Kingcure I-631 is a modified cycloaliphatic diamine in a light yellow-colored viscous liquid form. This product has a viscosity of 70-170 mPa.s and a specific gravity of 1.03. Kingcure I-631 is most commonly used in concrete adhesive formulation applicati...展开 Kingcure I-631 is a modified cycloaliphatic diamine in a light yellow-colored viscous liquid form. This product has a viscosity of 70-170 mPa.s and a specific gravity of 1.03. Kingcure I-631 is most commonly used in concrete adhesive formulation applications. 收起 | |
| Kingcure I-934 | Sanho Chemical Co., Ltd. | Kingcure I-934 is a modified aliphatic amine hardener in a light yellow-colored liquid form. This product has a viscosity of 80-200 mPa.s and a specific gravity of 1.02. Kingcure I-934 is most commonly used in surface coating, laminate, resin mortar, and ...展开 Kingcure I-934 is a modified aliphatic amine hardener in a light yellow-colored liquid form. This product has a viscosity of 80-200 mPa.s and a specific gravity of 1.02. Kingcure I-934 is most commonly used in surface coating, laminate, resin mortar, and adhesive formulation applications. 收起 | |
| Kingcure K-11 | Sanho Chemical Co., Ltd. | Kingcure K-11 is an accelerated aliphatic amine curing agent in an amber-colored liquid form. This product has a viscosity of 700-2400 mPa.s and a specific gravity of 1.04. Kingcure K-11 is most commonly used in adhesive formulation applications. | |
| Kingcure K-863A | Sanho Chemical Co., Ltd. | Kingcure K-863A is a mannish-type epoxy resin hardener in a light honey-colored liquid form. This product has a viscosity of 1000-2000 mPa.s and a specific gravity of 1.06. Kingcure K-863A is most commonly used in fast-setting adhesive formulation applica...展开 Kingcure K-863A is a mannish-type epoxy resin hardener in a light honey-colored liquid form. This product has a viscosity of 1000-2000 mPa.s and a specific gravity of 1.06. Kingcure K-863A is most commonly used in fast-setting adhesive formulation applications. 收起 | |
| Kingcure N-768 | Sanho Chemical Co., Ltd. | Kingcure N-768 is a rapid room temperature epoxy resin curing agent in a light honey-colored liquid form. This product has a viscosity of 150-250 mPa.s. Kingcure N-768 is most commonly used in solvent-free coating and fast-setting adhesive formulation app...展开 Kingcure N-768 is a rapid room temperature epoxy resin curing agent in a light honey-colored liquid form. This product has a viscosity of 150-250 mPa.s. Kingcure N-768 is most commonly used in solvent-free coating and fast-setting adhesive formulation applications. 收起 | |
| Kingcure N-784 | Sanho Chemical Co., Ltd. | Kingcure N-784 is a rapid room temperature epoxy resin curing agent in a light yellow-colored liquid form. This product has a viscosity of 30-60 mPa.s and a specific gravity of 0.95. Kingcure N-784 is most commonly used in surface coating, resin mortar, l...展开 Kingcure N-784 is a rapid room temperature epoxy resin curing agent in a light yellow-colored liquid form. This product has a viscosity of 30-60 mPa.s and a specific gravity of 0.95. Kingcure N-784 is most commonly used in surface coating, resin mortar, laminate, and adhesive formulation applications. 收起 | |
| Kingcure T-642NA | Sanho Chemical Co., Ltd. | Kingcure T-642NA is a modified aliphatic polyamine curing agent in a light yellow-colored liquid form. This product has a viscosity of less than 80 mPa.s. Kingcure T-642NA is most commonly used in coating and adhesive formulation applications. | |
| Kingcure X-165A | Sanho Chemical Co., Ltd. | Kingcure X-165A is a rapid room temperature epoxy resin curing agent in a light yellow-colored liquid form. This product has a viscosity of 50-150 mPa.s and a specific gravity of 1.11. Kingcure X-165A is most commonly used in solvent-free coating formulat...展开 Kingcure X-165A is a rapid room temperature epoxy resin curing agent in a light yellow-colored liquid form. This product has a viscosity of 50-150 mPa.s and a specific gravity of 1.11. Kingcure X-165A is most commonly used in solvent-free coating formulation applications. 收起 | |
| Kingcure X-2001 | Sanho Chemical Co., Ltd. | Kingcure X-2001 is a mannish-type epoxy resin hardener in a light honey-colored liquid form. This product has a viscosity of 1200-2500 mPa.s and a specific gravity of 1.11. Kingcure X-2001 is most commonly used in concrete adhesive formulation application...展开 Kingcure X-2001 is a mannish-type epoxy resin hardener in a light honey-colored liquid form. This product has a viscosity of 1200-2500 mPa.s and a specific gravity of 1.11. Kingcure X-2001 is most commonly used in concrete adhesive formulation applications. 收起 | |
| Kingcure X-963 | Sanho Chemical Co., Ltd. | Kingcure X-963 is a mannish-type epoxy resin hardener in a light honey-colored liquid form. This product has a viscosity of 100-200 mPa.s and a specific gravity of 1.10. Kingcure X-963 is most commonly used in coating formulation applications. | |
| Kingmide 305 | Sanho Chemical Co., Ltd. | Kingmide 305 is a polyaminoamide-type epoxy resin curing agent in a brown-colored, viscous liquid form. This product has a viscosity of 50,000-70,000 mPa.s and a specific gravity of 0.97. Kingmide 305 is most commonly used in adhesive formulation applicat...展开 Kingmide 305 is a polyaminoamide-type epoxy resin curing agent in a brown-colored, viscous liquid form. This product has a viscosity of 50,000-70,000 mPa.s and a specific gravity of 0.97. Kingmide 305 is most commonly used in adhesive formulation applications. 收起 | |
| Kingmide 310 | Sanho Chemical Co., Ltd. | Kingmide 310 is a high molecular weight, high viscosity, reactive polyamide resin in a brown-colored, viscous liquid form. This product has a viscosity of 30,000-50,000 mPa.s and a specific gravity of 0.97. Kingmide 310 is most commonly used in adhesive a...展开 Kingmide 310 is a high molecular weight, high viscosity, reactive polyamide resin in a brown-colored, viscous liquid form. This product has a viscosity of 30,000-50,000 mPa.s and a specific gravity of 0.97. Kingmide 310 is most commonly used in adhesive and coating formulation applications. 收起 | |
| Kingmide 315 | Sanho Chemical Co., Ltd. | Kingmide 315 is a polyaminoamide-type expoxy curing agent in a brown-colored, viscous liquid form. This product has a viscosity of 8000-12,000 mPa.s and a specific gravity of 0.97. Kingmide 315 is most commonly used in putty, adhesive, and sealant formula...展开 Kingmide 315 is a polyaminoamide-type expoxy curing agent in a brown-colored, viscous liquid form. This product has a viscosity of 8000-12,000 mPa.s and a specific gravity of 0.97. Kingmide 315 is most commonly used in putty, adhesive, and sealant formulation applications. 收起 | |
| Kingmide 315-FC | Sanho Chemical Co., Ltd. | Kingmide 315-FC is a polyaminoamide-type curing agent in a brown-colored liquid form. This product has a viscosity of 12,000-18,000 mPa.s. Kingmide 315-FC is most commonly used in adhesive formulation applications. | |
| Kingmide 315-FS | Sanho Chemical Co., Ltd. | Kingmide 315-FS is a polyaminoamide curing agent in a brown-colored liquid form. This product has a viscosity of 10,000-15,000 mPa.s. Kingmide 315-FS is most commonly used in adhesive formulation applications. | |
| Kingmide 315-L | Sanho Chemical Co., Ltd. | Kingmide 315-L is a polyaminoamide-type curing agent in a brown-colored viscous liquid form. This product has a viscosity of 1500-3000 mPa.s and a specific gravity of 0.97. Kingmide 315-L is most commonly used in adhesive, sealant, surface coating, and pu...展开 Kingmide 315-L is a polyaminoamide-type curing agent in a brown-colored viscous liquid form. This product has a viscosity of 1500-3000 mPa.s and a specific gravity of 0.97. Kingmide 315-L is most commonly used in adhesive, sealant, surface coating, and putty formulation applications. 收起 | |
| Kingmide 315-S | Sanho Chemical Co., Ltd. | Kingmide 315-S is a high viscosity, reactive polyamide resin in a brown-colored viscous liquid form. This product has a viscosity of 8000-12,000 mPa.s and a specific gravity of 0.97. Kingmide 315-S is most commonly used in adhesive and high-solids anti-co...展开 Kingmide 315-S is a high viscosity, reactive polyamide resin in a brown-colored viscous liquid form. This product has a viscosity of 8000-12,000 mPa.s and a specific gravity of 0.97. Kingmide 315-S is most commonly used in adhesive and high-solids anti-corrosive coating formulation applications. 收起 | |
| Kingmide 326-A | Sanho Chemical Co., Ltd. | Kingmide 326-A is a polyaminoamide curing agent in a brown-colored viscous liquid form. This product has a viscosity of 10,000-16,000 mPa.s. Kingmide 326-A is most commonly used in adhesive formulation applications. | |
| Kingmide 328-A | Sanho Chemical Co., Ltd. | Kingmide 328-A is a polyaminoamide-type epoxy curing agent in a brown-colored viscous liquid form. This product has a viscosity of 10,000-20,000 mPa.s and a specific gravity of 0.97. Kingmide 328-A is most commonly used in adhesive formulation application...展开 Kingmide 328-A is a polyaminoamide-type epoxy curing agent in a brown-colored viscous liquid form. This product has a viscosity of 10,000-20,000 mPa.s and a specific gravity of 0.97. Kingmide 328-A is most commonly used in adhesive formulation applications. 收起 | |
| Kingmide 334 | Sanho Chemical Co., Ltd. | Kingmide 334 is a polyaminoamide-type epoxy curing agent in a brown-colored viscous liquid form. This product has a viscosity of 450-650 mPa.s and a specific gravity of 0.96. Kingmide 334 is most commonly used in adhesive formulation applications. | |
| Kingmide 338 | Sanho Chemical Co., Ltd. | Kingmide 338 is a low-viscosity, ractive polyamide resin in a light yellow-colored viscous liquid form. This product has a viscosity of 1000-3000 mPa.s and a specific gravity of 0.97. Kingmide 338 is most commonly used in adhesive and putty formulation ap...展开 Kingmide 338 is a low-viscosity, ractive polyamide resin in a light yellow-colored viscous liquid form. This product has a viscosity of 1000-3000 mPa.s and a specific gravity of 0.97. Kingmide 338 is most commonly used in adhesive and putty formulation applications. 收起 | |
| Kingmide 340 | Sanho Chemical Co., Ltd. | Kingmide 340 is a low-viscosity, reactive polyamide resin in a brown-colored viscous liquid form. This product has a viscosity of 400-600 mPa.s and a specific gravity of 0.96. Kingmide 340 is most commonly used in coating, mortar, adhesive, and putty form...展开 Kingmide 340 is a low-viscosity, reactive polyamide resin in a brown-colored viscous liquid form. This product has a viscosity of 400-600 mPa.s and a specific gravity of 0.96. Kingmide 340 is most commonly used in coating, mortar, adhesive, and putty formulation applications. 收起 | |
| Kingmide 370 | Sanho Chemical Co., Ltd. | Kingmide 370 is a medium-viscosity, reactive polyamide resin in a brown-colored viscous liquid form. This product has a viscosity of 2500-4500 mPa.s and a specific gravity of 0.95. Kingmide 370 is most commonly used in adhesive and putty formulation appli...展开 Kingmide 370 is a medium-viscosity, reactive polyamide resin in a brown-colored viscous liquid form. This product has a viscosity of 2500-4500 mPa.s and a specific gravity of 0.95. Kingmide 370 is most commonly used in adhesive and putty formulation applications. 收起 | |
| Kingmide 374-L | Sanho Chemical Co., Ltd. | Kingmide 374-L is a low-viscosity, reactive polyamide resin in a brown-colored viscous liquid form. This product has a viscosity of 200-400 mPa.s and a specific gravity of 0.95. Kingmide 374-L is most commonly used in mortar, adhesive, and putty formulati...展开 Kingmide 374-L is a low-viscosity, reactive polyamide resin in a brown-colored viscous liquid form. This product has a viscosity of 200-400 mPa.s and a specific gravity of 0.95. Kingmide 374-L is most commonly used in mortar, adhesive, and putty formulation applications. 收起 | |
| Kingmide 384-S | Sanho Chemical Co., Ltd. | Kingmide 384-S is a modified polyaminoamide epoxy adduct curing agent in a brown-colored viscous liquid form. This product has a viscosity of 7000-10,000 mPa.s. Kingmide 384-S is most commonly used in adhesive formulation applications. | |
| Kingmide 390-70 | Sanho Chemical Co., Ltd. | Kingmide 390-70 is a reactive polyamide-adduct type epoxy resin curing agent in a brown-colored viscous liquid form. This product has a total solids content of 68-72%. Kingmide 390-70 is most commonly used in corrosion resistant paint formulation applicat...展开 Kingmide 390-70 is a reactive polyamide-adduct type epoxy resin curing agent in a brown-colored viscous liquid form. This product has a total solids content of 68-72%. Kingmide 390-70 is most commonly used in corrosion resistant paint formulation applications. 收起 | |
| Kingmide 507-KS | Sanho Chemical Co., Ltd. | Kingmide 507-KS is a polyaminoamide curing agent in a brown-colored liquid form. This product has a viscosity of 12,000-18,000 mPa.s. Kingmide 507-KS is most commonly used in adhesive formulation applications. | |
| Kingmide 513-F | Sanho Chemical Co., Ltd. | Kingmide 513-F is a poly amide curing agent in a brown-colored liquid form. This product has a viscosity of 10,000-20,000 mPa.s. Kingmide 513-F is most commonly used in adhesive formulation applications. | |
| Kingmide 530 | Sanho Chemical Co., Ltd. | Kingmide 530 is a fatty polyamide resin in a brown pellet form. This product has a softening point of 105-115°C. Kingmide 530 is most commonly used in rotogravure printing ink and alkyd varnish formulation applications. | |
| Kingmide 533 | Sanho Chemical Co., Ltd. | Kingmide 533 is a fatty polyamide resin in a brown pellet form. This product has a softening point of 100-110°C. Kingmide 533 is most commonly used in flexographic printing ink formulation applications. | |
| Kingmide 549 | Sanho Chemical Co., Ltd. | Kingmide 549 is a fatty polyamide resin in a brown-yellow pellet form. This product has a softening point of 112-119°C. Kingmide 549 is most commonly used in flexographic printing ink formulation applications. | |
| Kingmide 550 | Sanho Chemical Co., Ltd. | Kingmide 550 is a solid-type fatty polyamide resin in a brown-yellow pellet form. This product has a softening point of 105-115°C. Kingmide 550 is most commonly used in rotogravure printing ink formulation applications. | |
| Kingmide 550-A | Sanho Chemical Co., Ltd. | Kingmide 550-A is a high molecular weight polyamide resin in a brown-yellow pellet form. This product has a softening point of 105-115°C. Kingmide 550-A is most commonly used in hot-melt adhesive formulation applications. | |
| Kingmide 550-G | Sanho Chemical Co., Ltd. | Kingmide 550-G is a high molecular weight polyamide resin in a brown-yellow pellet form. This product has a softening point of 105-115°C. Kingmide 550-G is most commonly used in hot-melt adhesive formulation applications. | |
| Kingmide 551 | Sanho Chemical Co., Ltd. | Kingmide 551 is a high molecular weight polyamide resin in a brown-yellow pellet form. This product has a softening point of 105-115°C and an application temperature of 150-180°C. Kingmide 551 is most commonly used in hot-melt adhesive formulation applica...展开 Kingmide 551 is a high molecular weight polyamide resin in a brown-yellow pellet form. This product has a softening point of 105-115°C and an application temperature of 150-180°C. Kingmide 551 is most commonly used in hot-melt adhesive formulation applications. 收起 | |
| Kingmide 701 | Sanho Chemical Co., Ltd. | Kingmide 701 is a modified aliphatic amidoamine curing agent in an amber liquid form. This product has a viscosity of 500-1000 mPa.s and a specific gravity of 0.98. Kingmide 701 is most commonly used in adhesive formulation applications. | |
| Kingmide 705 | Sanho Chemical Co., Ltd. | Kingmide 705 is a low-viscosity, reactive polyamide resin in a brown-colored viscous liquid form. This product has a viscosity of 150-400 mPa.s and a specific gravity of 0.98. Kingmide 705 is most commonly used in mortar, putty, and adhesive formulation a...展开 Kingmide 705 is a low-viscosity, reactive polyamide resin in a brown-colored viscous liquid form. This product has a viscosity of 150-400 mPa.s and a specific gravity of 0.98. Kingmide 705 is most commonly used in mortar, putty, and adhesive formulation applications. 收起 | |
| Kingmide 710-SS | Sanho Chemical Co., Ltd. | Kingmide 710-SS is a modified aliphatic amidoamine curing agent. This product has a viscosity of 150-500 mPa.s and a specific gravity of 0.99. Kingmide 710-SS is most commonly used in mortar and adhesive formulation applications. | |
| Kingmide 715-A | Sanho Chemical Co., Ltd. | Kingmide 715-A is a medium viscosity, modified polyamide resin in a brown-colored viscous liquid form. This product has a viscosity of 1000-3000 mPa.s. Kingmide 715-A is most commonly used in putty and adhesive formulation applications. | |
| Kingmide 74 | Sanho Chemical Co., Ltd. | Kingmide 74 is a polyaminoamide-type epoxy resin curing agent in a brown-colored, viscous liquid form. This product has a viscosity of 500-1000 mPa.s and a specific gravity of 0.95. Kingmide 74 is most commonly used in grout and adhesive formulation app...展开 Kingmide 74 is a polyaminoamide-type epoxy resin curing agent in a brown-colored, viscous liquid form. This product has a viscosity of 500-1000 mPa.s and a specific gravity of 0.95. Kingmide 74 is most commonly used in grout and adhesive formulation applications. 收起 | |
| Kingmide 74-KB | Sanho Chemical Co., Ltd. | Kingmide 74-KB is a low-viscosity, reactive polyamide resin curing agent in a brown-colored, viscous liquid form. This product has a viscosity of 500-1000 mPa.s and a specific gravity of 0.96. Kingmide 74-KB is most commonly used in putty and adhesive for...展开 Kingmide 74-KB is a low-viscosity, reactive polyamide resin curing agent in a brown-colored, viscous liquid form. This product has a viscosity of 500-1000 mPa.s and a specific gravity of 0.96. Kingmide 74-KB is most commonly used in putty and adhesive formulation applications. 收起 | |
| Kingmide 74-NP | Sanho Chemical Co., Ltd. | Kingmide 74-NP is a low-viscosity, reactive polyamide resin curing agent in a brown-colored, viscous liquid form. This product has a viscosity of 200-400 mPa.s and a specific gravity of 0.96. Kingmide 74-NP is most commonly used in putty and adhesive form...展开 Kingmide 74-NP is a low-viscosity, reactive polyamide resin curing agent in a brown-colored, viscous liquid form. This product has a viscosity of 200-400 mPa.s and a specific gravity of 0.96. Kingmide 74-NP is most commonly used in putty and adhesive formulation applications. 收起 | |
| Kingmide H-110 | Sanho Chemical Co., Ltd. | Kingmide H-110 is a high molecular weight polyamide resin in an amber-colored pellet form. This product has a viscosity of 500-1000 mPa.s and a softening point of 105-115°C. Kingmide H-110 is most commonly used in hot-melt adhesive formulation application...展开 Kingmide H-110 is a high molecular weight polyamide resin in an amber-colored pellet form. This product has a viscosity of 500-1000 mPa.s and a softening point of 105-115°C. Kingmide H-110 is most commonly used in hot-melt adhesive formulation applications. 收起 | |
| Kingmide H-120 | Sanho Chemical Co., Ltd. | Kingmide H-120 is a high molecular weight polyamide resin in an amber-colored pellet form. This product has a viscosity of 2200-2800 mPa.s and a softening point of 115-125°C. Kingmide H-120 is most commonly used in hot-melt adhesive formulation applicatio...展开 Kingmide H-120 is a high molecular weight polyamide resin in an amber-colored pellet form. This product has a viscosity of 2200-2800 mPa.s and a softening point of 115-125°C. Kingmide H-120 is most commonly used in hot-melt adhesive formulation applications. 收起 | |
| Kingmide H-130 | Sanho Chemical Co., Ltd. | Kingmide H-130 is a high molecular weight polyamide resin in an amber-colored pellet form. This product has a viscosity of 2000-4000 mPa.s and a softening point of 125-135°C. Kingmide H-130 is most commonly used in hot-melt adhesive formulation applicatio...展开 Kingmide H-130 is a high molecular weight polyamide resin in an amber-colored pellet form. This product has a viscosity of 2000-4000 mPa.s and a softening point of 125-135°C. Kingmide H-130 is most commonly used in hot-melt adhesive formulation applications. 收起 | |
| Kingmide H-130W | Sanho Chemical Co., Ltd. | Kingmide H-130W is a high molecular weight polyamide resin in an amber-colored pellet form. This product has a viscosity of 2500-5000 mPa.s and a softening point of 125-135°C. Kingmide H-130W is most commonly used in hot-melt adhesive formulation applicat...展开 Kingmide H-130W is a high molecular weight polyamide resin in an amber-colored pellet form. This product has a viscosity of 2500-5000 mPa.s and a softening point of 125-135°C. Kingmide H-130W is most commonly used in hot-melt adhesive formulation applications. 收起 | |
| Kingmide H-135GC | Sanho Chemical Co., Ltd. | Kingmide H-135GC is a high molecular weight polyamide resin in an amber-colored pellet form. This product has a viscosity of 1500-4000 mPa.s and a softening point of 130-140°C. Kingmide H-135GC is most commonly used in hot-melt adhesive formulation applic...展开 Kingmide H-135GC is a high molecular weight polyamide resin in an amber-colored pellet form. This product has a viscosity of 1500-4000 mPa.s and a softening point of 130-140°C. Kingmide H-135GC is most commonly used in hot-melt adhesive formulation applications. 收起 | |
| Kingmide H-140HP | Sanho Chemical Co., Ltd. | Kingmide H-140HP is a high molecular weight polyamide resin in an amber-colored pellet form. This product has a viscosity of 5000-10,000 mPa.s and a softening point of 140-150°C. Kingmide H-140HP is most commonly used in hot-melt adhesive formulation appl...展开 Kingmide H-140HP is a high molecular weight polyamide resin in an amber-colored pellet form. This product has a viscosity of 5000-10,000 mPa.s and a softening point of 140-150°C. Kingmide H-140HP is most commonly used in hot-melt adhesive formulation applications. 收起 | |
| Kingmide H-170HV | Sanho Chemical Co., Ltd. | Kingmide H-170HV is a high molecular weight polyamide resin in an amber-colored pellet form. This product has a viscosity of 3000-7000 mPa.s and a softening point of 165-175°C. Kingmide H-170HV is most commonly used in hot-melt adhesive formulation applic...展开 Kingmide H-170HV is a high molecular weight polyamide resin in an amber-colored pellet form. This product has a viscosity of 3000-7000 mPa.s and a softening point of 165-175°C. Kingmide H-170HV is most commonly used in hot-melt adhesive formulation applications. 收起 | |
| Kingmide X-2100 | Sanho Chemical Co., Ltd. | Kingmide X-2100 is a medium viscosity, modified reactive polyamide resin in a brown-colored viscous liquid form. This product has a viscosity of 6000-12,000 mPa.s and a specific gravity of 1.04. Kingmide X-2100 is most commonly used in adhesive, coating, ...展开 Kingmide X-2100 is a medium viscosity, modified reactive polyamide resin in a brown-colored viscous liquid form. This product has a viscosity of 6000-12,000 mPa.s and a specific gravity of 1.04. Kingmide X-2100 is most commonly used in adhesive, coating, and putty formulation applications. 收起 | |
| Kingmide X-220B | Sanho Chemical Co., Ltd. | Kingmide X-220B is a low viscosity, modified reactive polyamide resin in a brown-colored viscous liquid form. This product has a viscosity of 450-650 mPa.s. Kingmide X-220B is most commonly used in adhesive, coating, and patch repair mortar formulation ap...展开 Kingmide X-220B is a low viscosity, modified reactive polyamide resin in a brown-colored viscous liquid form. This product has a viscosity of 450-650 mPa.s. Kingmide X-220B is most commonly used in adhesive, coating, and patch repair mortar formulation applications. 收起 | |
| KRATON® D1101 AIM Polymer | Kraton Polymers International Ltd. | KRATON® D1101 AIM Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as a powder dusted with calcium carbonate for supply to the North American market. This product is versatile with a ...展开 KRATON® D1101 AIM Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as a powder dusted with calcium carbonate for supply to the North American market. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1101 AIM Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, road and pipe coatings, and sealants. 收起 | |
| KRATON® D1101 AS Polymer | Kraton Polymers International Ltd. | KRATON® D1101 AS Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as a porous pellet dusted with amorphous silica. This product is versatile with a combination of high strength, wide ...展开 KRATON® D1101 AS Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as a porous pellet dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1101 AS Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, road and pipe coatings, and sealants. 收起 | |
| KRATON® D1101 ASM Polymer | Kraton Polymers International Ltd. | KRATON® D1101 ASM Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as a powder dusted with amorphous silica. This product is versatile with a combination of high strength, wide range ...展开 KRATON® D1101 ASM Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as a powder dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1101 ASM Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, road and pipe coatings, and sealants. 收起 | |
| KRATON® D1101 AT Polymer | Kraton Polymers International Ltd. | KRATON® D1101 AT Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of hard...展开 KRATON® D1101 AT Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1101 AT Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, road and pipe coatings, and sealants. 收起 | |
| KRATON® D1101 AU Polymer | Kraton Polymers International Ltd. | KRATON® D1101 AU Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as a porous pellet, undusted. This product is versatile with a combination of high strength, wide range of hardness, ...展开 KRATON® D1101 AU Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as a porous pellet, undusted. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1101 AU Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, road and pipe coatings, and sealants. 收起 | |
| KRATON® D1101 ES Polymer | Kraton Polymers International Ltd. | KRATON® D1101 ES Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide r...展开 KRATON® D1101 ES Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1101 ES Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, road and pipe coating, adhesives, and sealants. 收起 | |
| KRATON® D1101 ESM Polymer | Kraton Polymers International Ltd. | KRATON® D1101 ESM Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as powder dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of...展开 KRATON® D1101 ESM Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as powder dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1101 ESM Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, road and pipe coating, adhesives, and sealants. 收起 | |
| KRATON® D1101 ET Polymer | Kraton Polymers International Ltd. | KRATON® D1101 ET Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of hard...展开 KRATON® D1101 ET Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1101 ET Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, road and pipe coating, and sealants. 收起 | |
| KRATON® D1101 JO Polymer | Kraton Polymers International Ltd. | KRATON® D1101 JO Polymer is a clear, linear triblock copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied as a crumb dusted with organic dusting agent. This product is versatile with a combination of high strength, wi...展开 KRATON® D1101 JO Polymer is a clear, linear triblock copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied as a crumb dusted with organic dusting agent. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1101 JO Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, sealants, and coatings. 收起 | |
| KRATON® D1101 JSM Polymer | Kraton Polymers International Ltd. | KRATON® D1101 JSM Polymer is a clear, linear triblock copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied as a powder dusted with amorphous silica. This product is versatile with a combination of high strength, wide ...展开 KRATON® D1101 JSM Polymer is a clear, linear triblock copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied as a powder dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1101 JSM Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, sealants, and coatings. 收起 | |
| KRATON® D1101 JU Polymer | Kraton Polymers International Ltd. | KRATON® D1101 JU Polymer is a clear, linear triblock copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied as a undusted crumb. This product is versatile with a combination of high strength, wide range of hardness, and...展开 KRATON® D1101 JU Polymer is a clear, linear triblock copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied as a undusted crumb. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1101 JU Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, sealants, and coatings. 收起 | |
| KRATON® D1102 JS Polymer | Kraton Polymers International Ltd. | KRATON® D1102 JS Polymer is a clear linear block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide ra...展开 KRATON® D1102 JS Polymer is a clear linear block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1102 JS Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, sealants, and coatings. 收起 | |
| KRATON® D1102 JSZ Polymer | Kraton Polymers International Ltd. | KRATON® D1102 JSZ Polymer is a clear linear block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide r...展开 KRATON® D1102 JSZ Polymer is a clear linear block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1102 JSZ Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, sealants, and coatings. 收起 | |
| KRATON® D1111 KT Polymer | Kraton Polymers International Ltd. | KRATON® D1111 KT Polymer is a linear triblock copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied as dusted porous pellets. This product is versatile with a combination of high strength, low hardness, and low viscosi...展开 KRATON® D1111 KT Polymer is a linear triblock copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied as dusted porous pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1111 KT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1111 KU Polymer | Kraton Polymers International Ltd. | KRATON® D1111 KU Polymer is a linear triblock copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied as non-dusted porous pellets. This product is versatile with a combination of high strength, low hardness, and low vis...展开 KRATON® D1111 KU Polymer is a linear triblock copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied as non-dusted porous pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1111 KU Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1113 BT Polymer | Kraton Polymers International Ltd. | KRATON® D1113 BT Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 16%. It is supplied as dusted pellets. This product is versatile with a combination of high strength, low hardness, and low viscosit...展开 KRATON® D1113 BT Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 16%. It is supplied as dusted pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1113 BT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1113 PT Polymer | Kraton Polymers International Ltd. | KRATON® D1113 PT Polymer is a clear, linear block copolymer based on styrene and isoprene with a polystyrene content of 16%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low visco...展开 KRATON® D1113 PT Polymer is a clear, linear block copolymer based on styrene and isoprene with a polystyrene content of 16%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1113 PT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1114 BT Polymer | Kraton Polymers International Ltd. | KRATON® D1114 BT Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 19%. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, low hardness,...展开 KRATON® D1114 BT Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 19%. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1114 BT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1114 PSM Polymer | Kraton Polymers International Ltd. | KRATON® D1114 PSM Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 19%. It is supplied as powder dusted with silica. This product is versatile with a combination of high strength, low hardness, and ...展开 KRATON® D1114 PSM Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 19%. It is supplied as powder dusted with silica. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1114 PSM Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1114 PT Polymer | Kraton Polymers International Ltd. | KRATON® D1114 PT Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 19%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low vi...展开 KRATON® D1114 PT Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 19%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1114 PT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1116 ES Polymer | Kraton Polymers International Ltd. | KRATON® D1116 ES Polymer is a clear, radial triblock copolymer based on styrene and butadiene with a polystyrene content of 23%. It is supplied as a porous pellet dusted with an amorphous silica. This product is versatile with a combination of high streng...展开 KRATON® D1116 ES Polymer is a clear, radial triblock copolymer based on styrene and butadiene with a polystyrene content of 23%. It is supplied as a porous pellet dusted with an amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1116 ES Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, sealants, and coatings. 收起 | |
| KRATON® D1116 ESM Polymer | Kraton Polymers International Ltd. | KRATON® D1116 ESM Polymer is a clear, radial triblock copolymer based on styrene and butadiene with a polystyrene content of 23%. It is supplied as a powder dusted with an amorphous silica. This product is versatile with a combination of high strength, wi...展开 KRATON® D1116 ESM Polymer is a clear, radial triblock copolymer based on styrene and butadiene with a polystyrene content of 23%. It is supplied as a powder dusted with an amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1116 ESM Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, sealants, and coatings. 收起 | |
| KRATON® D1117 PT Polymer | Kraton Polymers International Ltd. | KRATON® D1117 PT Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 17%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low vi...展开 KRATON® D1117 PT Polymer is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 17%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1117 PT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1118 AS Polymer | Kraton Polymers International Ltd. | KRATON® D1118 AS Polymer is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide ran...展开 KRATON® D1118 AS Polymer is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1118 AS Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, sealants, and coatings. 收起 | |
| KRATON® D1118 ASM Polymer | Kraton Polymers International Ltd. | KRATON® D1118 ASM Polymer is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as powder dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of h...展开 KRATON® D1118 ASM Polymer is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as powder dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1118 ASM Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, sealants, and coatings. 收起 | |
| KRATON® D1118 AT Polymer | Kraton Polymers International Ltd. | KRATON® D1118 AT Polymer is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of hardne...展开 KRATON® D1118 AT Polymer is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1118 AT Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, sealants, and coatings. 收起 | |
| KRATON® D1118 BT Polymer | Kraton Polymers International Ltd. | KRATON® D1118 BT Polymer is a clear, linear triblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range o...展开 KRATON® D1118 BT Polymer is a clear, linear triblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1118 BT Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1118 ES Polymer | Kraton Polymers International Ltd. | KRATON® D1118 ES Polymer is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide ran...展开 KRATON® D1118 ES Polymer is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1118 ES Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1118 ESM Polymer | Kraton Polymers International Ltd. | KRATON® D1118 ESM Polymer is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as powder dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of h...展开 KRATON® D1118 ESM Polymer is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as powder dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1118 ESM Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. 收起 | |
| KRATON® D1118 ET Polymer | Kraton Polymers International Ltd. | KRATON® D1118 ET Polymer is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of hardne...展开 KRATON® D1118 ET Polymer is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1118 ET Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. 收起 |
