UL Prospector

成功!

成功保存搜索结果
205 U.S. Zinc 205 is a French Process in powder form, statistically measured zinc oxide formed from zinc metal. This grade is used by the zinc chemicals, paint/coating, ceramics industries, rubber, and in those applications where reasonable purity is required. 205 is a...展开 205 is a French Process in powder form, statistically measured zinc oxide formed from zinc metal. This grade is used by the zinc chemicals, paint/coating, ceramics industries, rubber, and in those applications where reasonable purity is required. 205 is available in a pelleted form (205P) and with surface treatment (205S). It has a surface area range of 4.0 to 6.0 m2 /g, a specific gravity of 5.6, and an apparent density (in powder form) of 20 to 40 and (in pellet form) of 50 to 85. 收起
205H U.S. Zinc 205H is a small particle size French Process in powder form, statistically measured zinc oxide formed from zinc metal. It has a greater surface area and is used by the paint, latex, plastic, and zinc chemicals industries and in applications where moderate...展开 205H is a small particle size French Process in powder form, statistically measured zinc oxide formed from zinc metal. It has a greater surface area and is used by the paint, latex, plastic, and zinc chemicals industries and in applications where moderate purity and greater reactivity are required. Grade 205H is available in a pelleted form (205HS) and with surface treatment (205HS). 205H has a surface area range of 6.0 to 8.5 m2 /g, a specific gravity of 5.6, and an apparent density (in powder form) of 20 to 40 and (in pellet form) of 50 to 85. 收起
205HSA U.S. Zinc 205HSA is an exceptionally small particle size French Process in powder form, statistically measured zinc oxide formed from zinc metal. It has a greater surface area and is used by the plastic, latex, and transparent rubber industries and in those applica...展开 205HSA is an exceptionally small particle size French Process in powder form, statistically measured zinc oxide formed from zinc metal. It has a greater surface area and is used by the plastic, latex, and transparent rubber industries and in those applications where great reactivity is required. 205HSA is obtainable with surface treatment (205HSA-S). It has a surface area range of 8.0 to 10.0 m2 /g, a specific gravity of 5.6, and an apparent density of 20 to 40 (pounds/ft3). 收起
205L U.S. Zinc 205L is a large particle size French Process in powder form, statistically measured zinc oxide formed from zinc metal. It has a lower surface area and is used by the paint and ceramics industries and in those applications where benefits result from larger...展开 205L is a large particle size French Process in powder form, statistically measured zinc oxide formed from zinc metal. It has a lower surface area and is used by the paint and ceramics industries and in those applications where benefits result from larger than average particles. Grade 205L is available in a pelleted form (205LP) and with surface treatment (205LS). 205L has a surface area range of 3.0 to 5.0 m2 /g, a specific gravity of 5.6, and an apparent density (in powder form) of 20 to 40 and (in pellet form) of 50 to 85. 收起
205XL U.S. Zinc 205XL is a large particle size French Process in powder form, statistically measured zinc oxide. 205XL is used by the electronics, coating, ceramics, and paint industries and in those applications which develop benefits from larger than average particles....展开 205XL is a large particle size French Process in powder form, statistically measured zinc oxide. 205XL is used by the electronics, coating, ceramics, and paint industries and in those applications which develop benefits from larger than average particles. It has a surface area range of 2.5 to 3.5 m2 /g, a specific gravity of 5.6, and an apparent density (in powder form) of 20 to 40 and (in pellet form) of 15 to 30. 收起
210 U.S. Zinc 210 is a French Process in powder form, statistically measured zinc oxide formed from zinc metal. This grade is used by the zinc chemicals, rubber, tape/adhesives, oil additives, traffic paint, wire insulation, glass/ceramics, electrogalvanizing, brake li...展开 210 is a French Process in powder form, statistically measured zinc oxide formed from zinc metal. This grade is used by the zinc chemicals, rubber, tape/adhesives, oil additives, traffic paint, wire insulation, glass/ceramics, electrogalvanizing, brake lining, and agriculture industries and in applications where General purpose zinc oxide could be used. 210 is available in a pelleted form (210P) and with surface treatment (210S). It has a surface area range of 4.0 to 6.0 m2 /g, a specific gravity of 5.6, and an apparent density (in powder form) of 20 to 40 and (in pellet form) of 50 to 85. 收起
210E U.S. Zinc 210E is common purpose French Process, in powder form, statistically measured zinc oxide formed from zinc metal. This grade is used in an assortment of applications, including electronics, brake lining, paint, zinc chemicals, coating, and rubber industrie...展开 210E is common purpose French Process, in powder form, statistically measured zinc oxide formed from zinc metal. This grade is used in an assortment of applications, including electronics, brake lining, paint, zinc chemicals, coating, and rubber industries. 210E is available in pelleted form (210E-P) and with surface treatment (210ES). It has a surface area range of 4.0 to 6.0 m2 /g, a specific gravity of 5.6, and an apparent density (in powder form) of 20 to 40 and (in pellet form) of 50 to 85. 收起
210H U.S. Zinc 210H is a small particle French Process, in powder form, statistically measured zinc oxide formed from zinc metal. This grade has a higher surface area and reactivity and is used by the latex, paint, plastic, and zinc chemicals industries. 210H is availab...展开 210H is a small particle French Process, in powder form, statistically measured zinc oxide formed from zinc metal. This grade has a higher surface area and reactivity and is used by the latex, paint, plastic, and zinc chemicals industries. 210H is available in a pelleted form (210HP) and with surface treatment (210HS). It has a surface area range of 6.0 to 8.5 m2 /g, a specific gravity of 5.6, and an apparent density (in powder form) of 20 to 40 and (in pellet form) of 50 to 85. 收起
210HSA U.S. Zinc 210HSA is an exceptionally small particle French Process, in powder form, statistically measured zinc oxide formed from zinc metal. This grade has a higher surface area and reactivity and is used by the plastic, latex, and transparent rubber industries an...展开 210HSA is an exceptionally small particle French Process, in powder form, statistically measured zinc oxide formed from zinc metal. This grade has a higher surface area and reactivity and is used by the plastic, latex, and transparent rubber industries and in applications where high reactivity is required. 210HSA is available with surface treatment (210HSA-S). It has a surface area range of 8 to 10 m2 /g, a specific gravity of 5.6, and an apparent density (in powder form) of 20 to 40. 收起
210L U.S. Zinc 210L is a large particle French Process, in powder form, statistically measured zinc oxide formed from zinc metal. This grade has a lower surface area and is used by the ceramics and paint industries. 210L is available in a pelleted form (210LP) and with ...展开 210L is a large particle French Process, in powder form, statistically measured zinc oxide formed from zinc metal. This grade has a lower surface area and is used by the ceramics and paint industries. 210L is available in a pelleted form (210LP) and with surface treatment (210LS). It has a surface area range of 3.0 to 5.0 m2 /g, a specific gravity of 5.6, and an apparent density (in powder form) of 20 to 40 and (in pellet form) of 50 to 85. 收起
AZO66 U.S. Zinc AZO66 is an exceptionally pure French Process, in powder form, statistically measured zinc oxide formed from zinc metal. AZO66 provides greater color and is vastly efficient in white or light colored goods. This grade is used in the zinc chemical, paint/c...展开 AZO66 is an exceptionally pure French Process, in powder form, statistically measured zinc oxide formed from zinc metal. AZO66 provides greater color and is vastly efficient in white or light colored goods. This grade is used in the zinc chemical, paint/coating, ceramic, oil additive industries and in those applications where great purity is dire. Grade AZO66 is available in a pelleted form (AZO66P), in a treated pelleted form (AZO66PT), and with surface treatment (AZO66T). AZO66 has a surface area range of 4.0 to 6.0 m2 /g, a specific gravity of 5.6, and an apparent density (in powder form) of 20 to 40 and (in pellet form) of 50 to 85. 收起
AZO66L U.S. Zinc AZO66L is an exceptionally pure French Process, a large particle, statistically measured zinc oxide formed from zinc metal. This grade is used by the zinc chemical, paint, and coating industries and in those applications which stem from greater than norma...展开 AZO66L is an exceptionally pure French Process, a large particle, statistically measured zinc oxide formed from zinc metal. This grade is used by the zinc chemical, paint, and coating industries and in those applications which stem from greater than normal high purity particles. Grade AZO66L is available in a pelleted form (AZO66LP) and with the surface treatment (AZO66LT). AZO66L has a surface area range of 3.0 to 5.0 m2 /g, a specific gravity of 5.6, and an apparent density (in powder form) of 20 to 40 and (in pellet form) of 50 to 85. 收起
AZO66XL U.S. Zinc AZO66XL is an exceptionally pure French Process, a large particle, statistically measured zinc oxide formed from zinc metal. This grade is used by the electronic, ceramic, paint, and coating industries and in those applications which stem from greater tha...展开 AZO66XL is an exceptionally pure French Process, a large particle, statistically measured zinc oxide formed from zinc metal. This grade is used by the electronic, ceramic, paint, and coating industries and in those applications which stem from greater than normal high purity particles. AZO66XL has a surface area range of 2.5 to 3.5 m2 /g, a specific gravity of 5.6, and an apparent density (in powder form) of 20 to 40 and (in pellet form) of 15 to 30. 收起
AZO77H U.S. Zinc AZO77H is an exceptionally pure powder, small particle size French Process, statistically measured zinc oxide formed from zinc metal. It is used for the manufacture of various chemicals, in the plastic, paint, latex, and coating industries and in those ap...展开 AZO77H is an exceptionally pure powder, small particle size French Process, statistically measured zinc oxide formed from zinc metal. It is used for the manufacture of various chemicals, in the plastic, paint, latex, and coating industries and in those applications where high purity and reactivity is required. Grade AZO77H is available with surface treatment (AZO77HT). It has a surface area range of 6.0 to 8.5 m2 /g, a specific gravity of 5.6, and an apparent density of 20 to 40 (lbs. /cu. Ft.). 收起
AZO77HSA U.S. Zinc AZO77HSA is an exceptionally small particle size French Process in powder form, statistically measured zinc oxide formed from zinc metal. AZO77HSA was explicitly developed to have the highest viscosity, reactivity, purity, and fineness. This grade is used...展开 AZO77HSA is an exceptionally small particle size French Process in powder form, statistically measured zinc oxide formed from zinc metal. AZO77HSA was explicitly developed to have the highest viscosity, reactivity, purity, and fineness. This grade is used in can sealants, latex compounds, zinc chemicals, plastics, paint/coating, and in the food can liner coating industry where the particularly fine particles freely convert certain accessible soluble into white sulfide, thus avoiding discoloration of food from sulfides of tin or iron. AZO77HSA is available with surface treatment (AZO77HSA-T), has a surface area range of 8.0 to 10.0 m2 /g, a specific gravity of 5.6, and an apparent density of 20 to 40 (lbs. /cu. Ft.). 收起
ExBar™ 200 Excalibar Minerals LLC ExBar™ 200 is a raw mineral material that is manufactured from natural barium sulfate ore. This product is used in many different applications such as paints, adhesives and sealants. It has a median particle size of 15.0u and an oil absorption of 9.
ExBar™ 325 Excalibar Minerals LLC ExBar™ 325 is a raw mineral material that is manufactured from natural barium sulfate ore. This product is used in many different applications such as paints, adhesives and sealants. It has a median particle size of 10.0u and an oil absorption of 10.
ExBar™ 400 Excalibar Minerals LLC ExBar™ 400 is a raw mineral material that is manufactured from natural barium sulfate ore. This product is used in many different applications such as paints, adhesives and sealants. It has a median particle size of 8.0u and an oil absorption of 12.
ExBar™ W 1 Excalibar Minerals LLC ExBar™ W 1 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 1 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 1u and an oil absorption of 15. 收起
ExBar™ W 2 Excalibar Minerals LLC ExBar™ W 2 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 2 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 2u and an oil absorption of 13. 收起
ExBar™ W 3 Excalibar Minerals LLC ExBar™ W 3 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 3 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 3u and an oil absorption of 13. 收起
ExBar™ W 325 Excalibar Minerals LLC ExBar™ W 325 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are pr...展开 ExBar™ W 325 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. 收起
ExBar™ W 4 Excalibar Minerals LLC ExBar™ W 4 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 4 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 4u and an oil absorption of 12. 收起
ExBar™ W 400 Excalibar Minerals LLC ExBar™ W 400 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are pr...展开 ExBar™ W 400 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 8u and an oil absorption of 10. 收起
ExCal® 100 Excalibar Minerals LLC ExCal® 100 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications.
ExCal® 200 Excalibar Minerals LLC ExCal® 200 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications.
ExCal® 325 Excalibar Minerals LLC ExCal® 325 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications.
ExCal® 400 Excalibar Minerals LLC ExCal® 400 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications.
ExCal® CW 100 Excalibar Minerals LLC ExCal® CW 100 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand ar...展开 ExCal® CW 100 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand are a standard. 收起
ExCal® CW 200 Excalibar Minerals LLC ExCal® CW 200 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand ar...展开 ExCal® CW 200 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand are a standard. 收起
ExCal® CW 325 Excalibar Minerals LLC ExCal® CW 325 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand ar...展开 ExCal® CW 325 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand are a standard. 收起
Fujicure 205-L Sanho Chemical Co., Ltd. Fujicure 205-L is a modified cycloaliphatic curing agent in a light honey-colored liquid form. This product has a viscosity of less than 400-700 mPa.s. Fujicure 205-L is most commonly used in solvent-free paint formulation applications.
Fujicure 4030 Sanho Chemical Co., Ltd. Fujicure 4030 is a modified aromatic polyamine epoxy curing agent in a brown-colored viscous liquid form. This product has a total solids content of 66-70%. Fujicure 4030 is most commonly used in epoxy paint formulation applications.
Fujicure 4200 Sanho Chemical Co., Ltd. Fujicure 4200 is a modified cycloaliphatic polyamine curing agent in a light yellow-colored liquid form. This product has a viscosity of less than 1700-2700 mPa.s. Fujicure 4200 is most commonly used in coating formulation applications.
Fujicure 4233 Sanho Chemical Co., Ltd. Fujicure 4233 is a low viscosity, modified cycloaliphatic polyamine curing agent in a light yellow-colored liquid form. This product has a viscosity of 650-900 mPa.s and a specific gravity of 0.95. Fujicure 4233 is most commonly used in coating formulatio...展开 Fujicure 4233 is a low viscosity, modified cycloaliphatic polyamine curing agent in a light yellow-colored liquid form. This product has a viscosity of 650-900 mPa.s and a specific gravity of 0.95. Fujicure 4233 is most commonly used in coating formulation applications. 收起
Fujicure 5000 Sanho Chemical Co., Ltd. Fujicure 5000 is a low viscosity, modified cycloaliphatic polyamine curing agent in a light yellow-colored viscous liquid form. This product has a viscosity of 800-2500 mPa.s and a specific gravity of 1.02. Fujicure 5000 is most commonly used in adhesive ...展开 Fujicure 5000 is a low viscosity, modified cycloaliphatic polyamine curing agent in a light yellow-colored viscous liquid form. This product has a viscosity of 800-2500 mPa.s and a specific gravity of 1.02. Fujicure 5000 is most commonly used in adhesive and solvent-based coating formulation applications. 收起
Fujicure 5003 Sanho Chemical Co., Ltd. Fujicure 5003 is a modified cycloaliphatic polyamine curing agent in a light yellow-colored viscous liquid form. This product has a viscosity of 3500-7500 mPa.s and a specific gravity of 1.08. Fujicure 5003 is most commonly used in coating formulation app...展开 Fujicure 5003 is a modified cycloaliphatic polyamine curing agent in a light yellow-colored viscous liquid form. This product has a viscosity of 3500-7500 mPa.s and a specific gravity of 1.08. Fujicure 5003 is most commonly used in coating formulation applications. 收起
Fujicure 5003-D Sanho Chemical Co., Ltd. Fujicure 5003-D is a modified cycloaliphatic amine in a light yellow-colored viscous liquid form. This product has a viscosity of 1000-2000 mPa.s and a specific gravity of 1.10. Fujicure 5003-D is most commonly used in coating formulation applications.
Fujicure 5250 Sanho Chemical Co., Ltd. Fujicure 5250 is a modified cycloaliphatic polyamine in a light yellow-colored viscous liquid form. This product has a viscosity of 6000-14,000 mPa.s and a specific gravity of 1.10. Fujicure 5250 is most commonly used in coating formulation applications.
Fujicure 5260 Sanho Chemical Co., Ltd. Fujicure 5260 is a modified cycloaliphatic polyamine in a light brown-colored viscous liquid form. This product has a viscosity of 1000-2000 mPa.s and a specific gravity of 1.03. Fujicure 5260 is most commonly used in epoxy mortar formulation applications...展开 Fujicure 5260 is a modified cycloaliphatic polyamine in a light brown-colored viscous liquid form. This product has a viscosity of 1000-2000 mPa.s and a specific gravity of 1.03. Fujicure 5260 is most commonly used in epoxy mortar formulation applications. 收起
Fujicure 5300 Sanho Chemical Co., Ltd. Fujicure 5300 is a modified cycloaliphatic polyamine epoxy curing agent in a light yellow-colored viscous liquid form. This product has a viscosity of 800-1700 mPa.s and a specific gravity of 1.02. Fujicure 5300 is most commonly used in adhesive and self-...展开 Fujicure 5300 is a modified cycloaliphatic polyamine epoxy curing agent in a light yellow-colored viscous liquid form. This product has a viscosity of 800-1700 mPa.s and a specific gravity of 1.02. Fujicure 5300 is most commonly used in adhesive and self-leveling coating formulation applications. 收起
Fujicure 5420 Sanho Chemical Co., Ltd. Fujicure 5420 is a modified cycloaliphatic polyamine epoxy curing agent in a light yellow-colored viscous liquid form. This product has a viscosity of 200-500 mPa.s and a specific gravity of 1.07. Fujicure 5420 is most commonly used in concrete adhesive f...展开 Fujicure 5420 is a modified cycloaliphatic polyamine epoxy curing agent in a light yellow-colored viscous liquid form. This product has a viscosity of 200-500 mPa.s and a specific gravity of 1.07. Fujicure 5420 is most commonly used in concrete adhesive formulation applications. 收起
Fujicure FX-220 Sanho Chemical Co., Ltd. Fujicure FX-220 is a modified cycloaliphatic polyamine epoxy curing agent in a light yellow-colored viscous liquid form. This product has a viscosity of 200-500 mPa.s and a specific gravity of 1.07. Fujicure FX-220 is most commonly used in coating and adh...展开 Fujicure FX-220 is a modified cycloaliphatic polyamine epoxy curing agent in a light yellow-colored viscous liquid form. This product has a viscosity of 200-500 mPa.s and a specific gravity of 1.07. Fujicure FX-220 is most commonly used in coating and adhesive formulation applications. 收起
Fujicure FXD-821 Sanho Chemical Co., Ltd. Fujicure FXD-821 is a modified aliphatic amine hardener in a light yellow-colored liquid form. This product has a viscosity of 40-70 mPa.s and a specific gravity of 0.95. Fujicure FXD-821 is most commonly used in surface coating, resin mortar, and adhesiv...展开 Fujicure FXD-821 is a modified aliphatic amine hardener in a light yellow-colored liquid form. This product has a viscosity of 40-70 mPa.s and a specific gravity of 0.95. Fujicure FXD-821 is most commonly used in surface coating, resin mortar, and adhesive formulation applications. 收起
Fujicure FXD-822 Sanho Chemical Co., Ltd. Fujicure FXD-822 is a modified cycloaliphatic amine epoxy curing agent in a light honey-colored liquid form. This product has a viscosity of 300-700 mPa.s and a specific gravity of 1.03. Fujicure FXD-822 is most commonly used in solvent-free coating and m...展开 Fujicure FXD-822 is a modified cycloaliphatic amine epoxy curing agent in a light honey-colored liquid form. This product has a viscosity of 300-700 mPa.s and a specific gravity of 1.03. Fujicure FXD-822 is most commonly used in solvent-free coating and mortar formulation applications. 收起
Fujicure FXK-832 Sanho Chemical Co., Ltd. Fujicure FXK-832 is a modified amine-type hardener in a light yellow-colored viscous liquid form. This product has a viscosity of 2000-5000 mPa.s and a specific gravity of 1.06. Fujicure FXK-832 is most commonly used in coating formulation applications.
Fujicure FXM-823B Sanho Chemical Co., Ltd. Fujicure FXM-823B is a modified aromatic amine-based epoxy resin curing agent in a free flowing, reddish-brown-colored liquid form. This product has a viscosity of 1000-1400 mPa.s and a specific gravity of 1.16. Fujicure FXM-823B is most commonly used in ...展开 Fujicure FXM-823B is a modified aromatic amine-based epoxy resin curing agent in a free flowing, reddish-brown-colored liquid form. This product has a viscosity of 1000-1400 mPa.s and a specific gravity of 1.16. Fujicure FXM-823B is most commonly used in coal tar-epoxy coating applications. 收起
Fujicure FXM-824A Sanho Chemical Co., Ltd. Fujicure FXM-824A is a modified activated aromatic amine epoxy curing agent in a light honey-colored liquid form. This product has a viscosity of 2500-3500 mPa.s and a specific gravity of 1.13. Fujicure FXM-824A is most commonly used in tar and epoxy coat...展开 Fujicure FXM-824A is a modified activated aromatic amine epoxy curing agent in a light honey-colored liquid form. This product has a viscosity of 2500-3500 mPa.s and a specific gravity of 1.13. Fujicure FXM-824A is most commonly used in tar and epoxy coating formulation applications. 收起
Fujicure FXM-824B Sanho Chemical Co., Ltd. Fujicure FXM-824B is a modified activated aromatic amine epoxy curing agent in a light honey-colored liquid form. This product has a viscosity of 2000-3000 mPa.s and a specific gravity of 1.12. Fujicure FXM-824B is most commonly used in tar and epoxy coat...展开 Fujicure FXM-824B is a modified activated aromatic amine epoxy curing agent in a light honey-colored liquid form. This product has a viscosity of 2000-3000 mPa.s and a specific gravity of 1.12. Fujicure FXM-824B is most commonly used in tar and epoxy coating formulation applications. 收起
Fujicure FXR-1020 Sanho Chemical Co., Ltd. Fujicure FXR-1020 is a latent-type curing agent and accelerator in a light yellow-colored powder form. This product has a viscosity of 1200-2500 mPa.s. Fujicure FXR-1020 is most commonly used in powder coating formulation applications.
Fujicure FXR-1030 Sanho Chemical Co., Ltd. Fujicure FXR-1030 is a latent-type epoxy resin curing agent and accelerator in a white-colored powder form. This product has a specific gravity of 1.09. Fujicure FXR-1030 is most commonly used in powder coating formulation applications.
Fujicure FXR-1081 Sanho Chemical Co., Ltd. Fujicure FXR-1081 is a latent-type epoxy resin curing agent and accelerator in a white-colored powder form. This product has a specific gravity of 1.11. Fujicure FXR-1081 is most commonly used in powder coating formulation applications.
Fujicure FXR-1090-FA Sanho Chemical Co., Ltd. Fujicure FXR-1090-FA is a latent-type epoxy resin curing agent and accelerator in a white-colored powder form. This product has a specific gravity of 1.11 and a softening point of 118°C. Fujicure FXR-1090-FA is most commonly used in powder coating formula...展开 Fujicure FXR-1090-FA is a latent-type epoxy resin curing agent and accelerator in a white-colored powder form. This product has a specific gravity of 1.11 and a softening point of 118°C. Fujicure FXR-1090-FA is most commonly used in powder coating formulation applications. 收起
Kingcure 100-BD Sanho Chemical Co., Ltd. Kingcure 100-BD is a modified aliphatic polyamine epoxy curing agent in a light yellow-colored liquid form. This product has a viscosity of 3000-6000 mPa.s. Kingcure 100-BD is most commonly used in solvent-free coating formulation applications.
Kingcure 2010 Sanho Chemical Co., Ltd. Kingcure 2010 is a reactive polyamide epoxy resin curing agent in a light honey-colored viscous liquid form. This product has a viscosity of 1200-2000 mPa.s and a specific gravity of 0.96. Kingcure 2010 is most commonly used in concrete adhesive formulati...展开 Kingcure 2010 is a reactive polyamide epoxy resin curing agent in a light honey-colored viscous liquid form. This product has a viscosity of 1200-2000 mPa.s and a specific gravity of 0.96. Kingcure 2010 is most commonly used in concrete adhesive formulation applications. 收起
Kingcure 2040-MS Sanho Chemical Co., Ltd. Kingcure 2040-MS is a mannish-type epoxy resin hardener in a light honey-colored liquid form. This product has a viscosity of 2000-6000 mPa.s and a specific gravity of 1.08. Kingcure 2040-MS is most commonly used in fast-setting adhesive formulation appli...展开 Kingcure 2040-MS is a mannish-type epoxy resin hardener in a light honey-colored liquid form. This product has a viscosity of 2000-6000 mPa.s and a specific gravity of 1.08. Kingcure 2040-MS is most commonly used in fast-setting adhesive formulation applications. 收起
Kingcure 451-P Sanho Chemical Co., Ltd. Kingcure 451-P is a modified activated aromatic amine epoxy resin curing agent in a dark brown-colored liquid form. This product has a viscosity of 3000-8000 mPa.s and a specific gravity of 1.09. Kingcure 451-P is most commonly used in coating formulation...展开 Kingcure 451-P is a modified activated aromatic amine epoxy resin curing agent in a dark brown-colored liquid form. This product has a viscosity of 3000-8000 mPa.s and a specific gravity of 1.09. Kingcure 451-P is most commonly used in coating formulation applications. 收起
Kingcure 515-KD Sanho Chemical Co., Ltd. Kingcure 515-KD is a modified cycloaliphatic polyamine adduct curing agent in an amber-colored liquid form. This product has a viscosity of 300-700 mPa.s and a specific gravity of 1.01. Kingcure 515-KD is most commonly used in solvent-free coating and adh...展开 Kingcure 515-KD is a modified cycloaliphatic polyamine adduct curing agent in an amber-colored liquid form. This product has a viscosity of 300-700 mPa.s and a specific gravity of 1.01. Kingcure 515-KD is most commonly used in solvent-free coating and adhesive formulation applications. 收起
Kingcure 613-B Sanho Chemical Co., Ltd. Kingcure 613-B is a rapid room temperature modified polyamine curing agent in a light yellow-colored liquid form. This product has a viscosity of 30-100 mPa.s. Kingcure 613-B is most commonly used in solvent-free coating and adhesive formulation applicati...展开 Kingcure 613-B is a rapid room temperature modified polyamine curing agent in a light yellow-colored liquid form. This product has a viscosity of 30-100 mPa.s. Kingcure 613-B is most commonly used in solvent-free coating and adhesive formulation applications. 收起
Kingcure 800-C Sanho Chemical Co., Ltd. Kingcure 800-C is a mercaptan terminated polymer in a light yellow-colored liquid form. This product has a viscosity of 10,000-20,000 mPa.s. Kingcure 800-C is most commonly used in construction adhesive formulation applications.
Kingcure 800-F Sanho Chemical Co., Ltd. Kingcure 800-F is a mercaptan terminated polymer in a light yellow-colored liquid form. This product has a slower gel time and a viscosity of 10,000-20,000 mPa.s. Kingcure 800-F is most commonly used in construction adhesive formulation applications.
Kingcure 800-S Sanho Chemical Co., Ltd. Kingcure 800-S is a mercaptan terminated polymer in a light yellow-colored viscous liquid form. This product has a slower gel time and a viscosity of 10,000-20,000 mPa.s and a specific gravity of 1.13. Kingcure 800-S is most commonly used in mortar and fa...展开 Kingcure 800-S is a mercaptan terminated polymer in a light yellow-colored viscous liquid form. This product has a slower gel time and a viscosity of 10,000-20,000 mPa.s and a specific gravity of 1.13. Kingcure 800-S is most commonly used in mortar and fast-setting adhesive formulation applications. 收起
Kingcure 925 Sanho Chemical Co., Ltd. Kingcure 925 is a low viscosity, modified aliphatic polyamine epoxy curing agent in a light-colored liquid form. This product has a viscosity of less than 80 mPa.s and a specific gravity of 0.95. Kingcure 925 is most commonly used in laminate, mortar, adh...展开 Kingcure 925 is a low viscosity, modified aliphatic polyamine epoxy curing agent in a light-colored liquid form. This product has a viscosity of less than 80 mPa.s and a specific gravity of 0.95. Kingcure 925 is most commonly used in laminate, mortar, adhesive, and coating formulation applications. 收起
Kingcure A-611 Sanho Chemical Co., Ltd. Kingcure A-611 is a modified aliphatic polyamine adduct curing agent in an amber-colored liquid form. This product has a viscosity of 13-25 mPa.s and a specific gravity of 1.09. Kingcure A-611 is most commonly used in adhesive formulation applications.
Kingcure B-311 Sanho Chemical Co., Ltd. Kingcure B-311 is a low viscosity, modified cycloaliphatic polyamine epoxy curing agent in a light yellow-colored liquid form. This product has a viscosity of 300-700 mPa.s. Kingcure B-311 is most commonly used in solvent-free coating formulation applicat...展开 Kingcure B-311 is a low viscosity, modified cycloaliphatic polyamine epoxy curing agent in a light yellow-colored liquid form. This product has a viscosity of 300-700 mPa.s. Kingcure B-311 is most commonly used in solvent-free coating formulation applications. 收起
Kingcure B-312 Sanho Chemical Co., Ltd. Kingcure B-312 is a modified cycloaliphatic polyamine epoxy curing agent in a light yellow-colored liquid form. This product has a viscosity of 30 mPa.s. Kingcure B-312 is most commonly used in solvent-free coating and adhesive formulation applications.
Kingcure D-211 Sanho Chemical Co., Ltd. Kingcure D-211 is a modified aliphatic polyamine epoxy curing agent in an amber-colored liquid form. This product has a viscosity of 50-150 mPa.s. Kingcure D-211 is most commonly used in coating and adhesive formulation applications.
Kingcure E-325 Sanho Chemical Co., Ltd. Kingcure E-325 is a modified cycloaliphatic polyamine in a light yellow-colored liquid form. This product has a viscosity of 30-100 mPa.s. Kingcure E-325 is most commonly used in solvent-free coating formulation applications.
Kingcure I-621 Sanho Chemical Co., Ltd. Kingcure I-621 is a modified cycloaliphatic diamine in a slightly yellow-colored viscous liquid form. This product has a viscosity of 1500-2500 mPa.s and a specific gravity of 1.02. Kingcure I-621 is most commonly used in coating formulation applications.
Kingcure I-631 Sanho Chemical Co., Ltd. Kingcure I-631 is a modified cycloaliphatic diamine in a light yellow-colored viscous liquid form. This product has a viscosity of 70-170 mPa.s and a specific gravity of 1.03. Kingcure I-631 is most commonly used in concrete adhesive formulation applicati...展开 Kingcure I-631 is a modified cycloaliphatic diamine in a light yellow-colored viscous liquid form. This product has a viscosity of 70-170 mPa.s and a specific gravity of 1.03. Kingcure I-631 is most commonly used in concrete adhesive formulation applications. 收起
Kingcure I-934 Sanho Chemical Co., Ltd. Kingcure I-934 is a modified aliphatic amine hardener in a light yellow-colored liquid form. This product has a viscosity of 80-200 mPa.s and a specific gravity of 1.02. Kingcure I-934 is most commonly used in surface coating, laminate, resin mortar, and ...展开 Kingcure I-934 is a modified aliphatic amine hardener in a light yellow-colored liquid form. This product has a viscosity of 80-200 mPa.s and a specific gravity of 1.02. Kingcure I-934 is most commonly used in surface coating, laminate, resin mortar, and adhesive formulation applications. 收起
Kingcure K-11 Sanho Chemical Co., Ltd. Kingcure K-11 is an accelerated aliphatic amine curing agent in an amber-colored liquid form. This product has a viscosity of 700-2400 mPa.s and a specific gravity of 1.04. Kingcure K-11 is most commonly used in adhesive formulation applications.
Kingcure K-863A Sanho Chemical Co., Ltd. Kingcure K-863A is a mannish-type epoxy resin hardener in a light honey-colored liquid form. This product has a viscosity of 1000-2000 mPa.s and a specific gravity of 1.06. Kingcure K-863A is most commonly used in fast-setting adhesive formulation applica...展开 Kingcure K-863A is a mannish-type epoxy resin hardener in a light honey-colored liquid form. This product has a viscosity of 1000-2000 mPa.s and a specific gravity of 1.06. Kingcure K-863A is most commonly used in fast-setting adhesive formulation applications. 收起
Kingcure M-510 Sanho Chemical Co., Ltd. Kingcure M-510 is a modified activated aromatic amine curing agent in a dark brown-colored liquid form. This product has a viscosity of 500-2000 mPa.s and a specific gravity of 1.13. Kingcure M-510 is most commonly used in primer coating formulation appli...展开 Kingcure M-510 is a modified activated aromatic amine curing agent in a dark brown-colored liquid form. This product has a viscosity of 500-2000 mPa.s and a specific gravity of 1.13. Kingcure M-510 is most commonly used in primer coating formulation applications. 收起
Kingcure M-510BS Sanho Chemical Co., Ltd. Kingcure M-510BS is a modified activated aromatic amine curing agent in a dark brown-colored liquid form. This product has a viscosity of 300-700 mPa.s and a specific gravity of 1.13. Kingcure M-510BS is most commonly used in primer coating formulation ap...展开 Kingcure M-510BS is a modified activated aromatic amine curing agent in a dark brown-colored liquid form. This product has a viscosity of 300-700 mPa.s and a specific gravity of 1.13. Kingcure M-510BS is most commonly used in primer coating formulation applications. 收起
Kingcure M-530 Sanho Chemical Co., Ltd. Kingcure M-530 is a modified activated aromatic amine curing agent in a dark brown-colored liquid form. This product has a viscosity of 200-500 mPa.s and a specific gravity of 1.16. Kingcure M-530 is most commonly used in primer coating formulation applic...展开 Kingcure M-530 is a modified activated aromatic amine curing agent in a dark brown-colored liquid form. This product has a viscosity of 200-500 mPa.s and a specific gravity of 1.16. Kingcure M-530 is most commonly used in primer coating formulation applications. 收起
Kingcure N-768 Sanho Chemical Co., Ltd. Kingcure N-768 is a rapid room temperature epoxy resin curing agent in a light honey-colored liquid form. This product has a viscosity of 150-250 mPa.s. Kingcure N-768 is most commonly used in solvent-free coating and fast-setting adhesive formulation app...展开 Kingcure N-768 is a rapid room temperature epoxy resin curing agent in a light honey-colored liquid form. This product has a viscosity of 150-250 mPa.s. Kingcure N-768 is most commonly used in solvent-free coating and fast-setting adhesive formulation applications. 收起
Kingcure N-784 Sanho Chemical Co., Ltd. Kingcure N-784 is a rapid room temperature epoxy resin curing agent in a light yellow-colored liquid form. This product has a viscosity of 30-60 mPa.s and a specific gravity of 0.95. Kingcure N-784 is most commonly used in surface coating, resin mortar, l...展开 Kingcure N-784 is a rapid room temperature epoxy resin curing agent in a light yellow-colored liquid form. This product has a viscosity of 30-60 mPa.s and a specific gravity of 0.95. Kingcure N-784 is most commonly used in surface coating, resin mortar, laminate, and adhesive formulation applications. 收起
Kingcure T-642NA Sanho Chemical Co., Ltd. Kingcure T-642NA is a modified aliphatic polyamine curing agent in a light yellow-colored liquid form. This product has a viscosity of less than 80 mPa.s. Kingcure T-642NA is most commonly used in coating and adhesive formulation applications.
Kingcure X-165A Sanho Chemical Co., Ltd. Kingcure X-165A is a rapid room temperature epoxy resin curing agent in a light yellow-colored liquid form. This product has a viscosity of 50-150 mPa.s and a specific gravity of 1.11. Kingcure X-165A is most commonly used in solvent-free coating formulat...展开 Kingcure X-165A is a rapid room temperature epoxy resin curing agent in a light yellow-colored liquid form. This product has a viscosity of 50-150 mPa.s and a specific gravity of 1.11. Kingcure X-165A is most commonly used in solvent-free coating formulation applications. 收起
Kingcure X-166K Sanho Chemical Co., Ltd. Kingcure X-166K is a low viscosity, modified aliphatic plyamine epoxy curing agent in a light yellow-colored liquid form. This product has a viscosity of 80-150 mPa.s and a specific gravity of 1.04. Kingcure X-166K is most commonly used in solvent-free co...展开 Kingcure X-166K is a low viscosity, modified aliphatic plyamine epoxy curing agent in a light yellow-colored liquid form. This product has a viscosity of 80-150 mPa.s and a specific gravity of 1.04. Kingcure X-166K is most commonly used in solvent-free coating formulation applications. 收起
Kingcure X-2001 Sanho Chemical Co., Ltd. Kingcure X-2001 is a mannish-type epoxy resin hardener in a light honey-colored liquid form. This product has a viscosity of 1200-2500 mPa.s and a specific gravity of 1.11. Kingcure X-2001 is most commonly used in concrete adhesive formulation application...展开 Kingcure X-2001 is a mannish-type epoxy resin hardener in a light honey-colored liquid form. This product has a viscosity of 1200-2500 mPa.s and a specific gravity of 1.11. Kingcure X-2001 is most commonly used in concrete adhesive formulation applications. 收起
Kingcure X-963 Sanho Chemical Co., Ltd. Kingcure X-963 is a mannish-type epoxy resin hardener in a light honey-colored liquid form. This product has a viscosity of 100-200 mPa.s and a specific gravity of 1.10. Kingcure X-963 is most commonly used in coating formulation applications.
Kingcure X-980W Sanho Chemical Co., Ltd. Kingcure X-980W is a waterborne, modified polyamine curing agent in a light yellow-colored viscous liquid form. This product has a viscosity of 10,000-20,000 mPa.s and a specific gravity of 1.13. Kingcure X-980W is most commonly used in high-gloss coating...展开 Kingcure X-980W is a waterborne, modified polyamine curing agent in a light yellow-colored viscous liquid form. This product has a viscosity of 10,000-20,000 mPa.s and a specific gravity of 1.13. Kingcure X-980W is most commonly used in high-gloss coating formulation applications. 收起
Kingcure XD-230I Sanho Chemical Co., Ltd. Kingcure XD-230I is a low viscosity, rapid room temperature epoxy resin curing agent in a light yellow-colored liquid form. This product has a viscosity of 150-250 mPa.s and a specific gravity of 1.11. Kingcure XD-230I is most commonly used in solvent-fre...展开 Kingcure XD-230I is a low viscosity, rapid room temperature epoxy resin curing agent in a light yellow-colored liquid form. This product has a viscosity of 150-250 mPa.s and a specific gravity of 1.11. Kingcure XD-230I is most commonly used in solvent-free coating formulation applications. 收起
Kingmide 150-50 Sanho Chemical Co., Ltd. Kingmide 150-50 is a polyamide-type epoxy curing agent in a brown-colored viscous liquid form. This product has a total solids content of 48-52%. Kingmide 150-50 is most commonly used in primer coating formulation applications.
Kingmide 300 Sanho Chemical Co., Ltd. Kingmide 300 is a high molecular weight, reactive polyamide resin in a brown-colored, viscous liquid form. This product has a viscosity of 200-600 mPa.s and a specific gravity of 0.97. Kingmide 300 is most commonly used in coating formulation applicatio...展开 Kingmide 300 is a high molecular weight, reactive polyamide resin in a brown-colored, viscous liquid form. This product has a viscosity of 200-600 mPa.s and a specific gravity of 0.97. Kingmide 300 is most commonly used in coating formulation applications where increased adhesion, chemical-resistance, and water-resistance are required. 收起
Kingmide 300-65 Sanho Chemical Co., Ltd. Kingmide 300-65 is a polyamide-type epoxy curing agent in a brown-colored viscous liquid form. This product has a total solids content of 63-67%. Kingmide 300-65 is most commonly used in heavy-duty primer coating formulation applications.
Kingmide 305 Sanho Chemical Co., Ltd. Kingmide 305 is a polyaminoamide-type epoxy resin curing agent in a brown-colored, viscous liquid form. This product has a viscosity of 50,000-70,000 mPa.s and a specific gravity of 0.97. Kingmide 305 is most commonly used in adhesive formulation applicat...展开 Kingmide 305 is a polyaminoamide-type epoxy resin curing agent in a brown-colored, viscous liquid form. This product has a viscosity of 50,000-70,000 mPa.s and a specific gravity of 0.97. Kingmide 305 is most commonly used in adhesive formulation applications. 收起
Kingmide 305-31 Sanho Chemical Co., Ltd. Kingmide 305-31 is a polyamide-type epoxy resin curing agent in a brown-colored viscous liquid form. This product has a total solids content of 29-33%. Kingmide 305-31 is most commonly used in heavy-duty primer coating formulation applications.
Kingmide 305-31MI Sanho Chemical Co., Ltd. Kingmide 305-31MI is a polyamide-type epoxy resin curing agent in a brown-colored viscous liquid form. This product has a total solids content of 29-33%. Kingmide 305-31MI is most commonly used in heavy-duty primer coating formulation applications.
Kingmide 305-50 Sanho Chemical Co., Ltd. Kingmide 305-50 is a reactive polyamide-type epoxy resin curing agent in a brown-colored viscous liquid form. This product has a total solids content of 48-52%. Kingmide 305-50 is most commonly used in heavy-duty primer coating formulation applications.
Kingmide 305-60 Sanho Chemical Co., Ltd. Kingmide 305-60 is a reactive polyamide-type epoxy resin curing agent in a brown-colored viscous liquid form. This product has a total solids content of 58-62%. Kingmide 305-60 is most commonly used in heavy-duty primer coating formulation applications.
Kingmide 305-70 Sanho Chemical Co., Ltd. Kingmide 305-70 is a reactive polyamide-type epoxy resin curing agent in a brown-colored viscous liquid form. This product has a total solids content of 68-72%. Kingmide 305-70 is most commonly used in heavy-duty primer coating formulation applications.
Kingmide 305-70X Sanho Chemical Co., Ltd. Kingmide 305-70X is a reactive polyamide-type epoxy resin curing agent in a brown-colored viscous liquid form. This product has a total solids content of 68-72%. Kingmide 305-70X is most commonly used in heavy-duty primer coating formulation applications.
Kingmide 310 Sanho Chemical Co., Ltd. Kingmide 310 is a high molecular weight, high viscosity, reactive polyamide resin in a brown-colored, viscous liquid form. This product has a viscosity of 30,000-50,000 mPa.s and a specific gravity of 0.97. Kingmide 310 is most commonly used in adhesive a...展开 Kingmide 310 is a high molecular weight, high viscosity, reactive polyamide resin in a brown-colored, viscous liquid form. This product has a viscosity of 30,000-50,000 mPa.s and a specific gravity of 0.97. Kingmide 310 is most commonly used in adhesive and coating formulation applications. 收起
Kingmide 315 Sanho Chemical Co., Ltd. Kingmide 315 is a polyaminoamide-type expoxy curing agent in a brown-colored, viscous liquid form. This product has a viscosity of 8000-12,000 mPa.s and a specific gravity of 0.97. Kingmide 315 is most commonly used in putty, adhesive, and sealant formula...展开 Kingmide 315 is a polyaminoamide-type expoxy curing agent in a brown-colored, viscous liquid form. This product has a viscosity of 8000-12,000 mPa.s and a specific gravity of 0.97. Kingmide 315 is most commonly used in putty, adhesive, and sealant formulation applications. 收起
Kingmide 315-80 Sanho Chemical Co., Ltd. Kingmide 315-80 is a reactive polyamide-type epoxy resin curing agent in a brown-colored viscous liquid form. This product has a total solids content of 78-82%. Kingmide 315-80 is most commonly used in heavy-duty primer coating formulation applications.
Kingmide 315-FC Sanho Chemical Co., Ltd. Kingmide 315-FC is a polyaminoamide-type curing agent in a brown-colored liquid form. This product has a viscosity of 12,000-18,000 mPa.s. Kingmide 315-FC is most commonly used in adhesive formulation applications.
Kingmide 315-FS Sanho Chemical Co., Ltd. Kingmide 315-FS is a polyaminoamide curing agent in a brown-colored liquid form. This product has a viscosity of 10,000-15,000 mPa.s. Kingmide 315-FS is most commonly used in adhesive formulation applications.