| Accelerator 2950 | Huntsman Advanced Materials 亨斯迈先进材料 | 当与多胺、聚酰胺及其加成物共用时，Accelerator 2950 固化剂是一种有效的促进剂和共反应固化剂。它可用于固化液体环氧树脂，例如用于无溶剂涂料及地坪体系中的 Araldite® GY 9708-3 树脂、Araldite® PY 302-2 树脂。它也可以用于固化固体环氧树脂或溶剂型固体环氧，如用于船舶维护的溶剂型 Araldite® GZ 7071 X 75 树脂。当其在主剂中用量为1-3%时，Accelerator 2950固化剂也是聚氨酯体系有效的促进剂及共反应固化剂。 | |
| Ara®Cool 1034 XW 90 | Huntsman Advanced Materials 亨斯迈先进材料 | Ara®Cool 1034 XW 90是改性曼尼期碱类固化剂。它在低温下有极其长的可操作时间，以及显著的反应活性。它有非常低的VOC（<10%溶剂）。在0-5℃的低温下，漆膜硬度增长显著。在喷砂钢板上具有优异的柔韧性，附着力和防腐性。无需熟化即可消除漆膜泛白。与Accelerator 2950配合使用时，可获得显著的催化效果。 | |
| Ara®Cool 1047 W80 | Huntsman Advanced Materials 亨斯迈先进材料 | Ara®Cool 1047 W80 is a special hardener for low temperature cure on metallic surfaces. It can be combines with liquid, semi-solid, or solid epoxy resins in solution for solvent-containing, ambient-curing high-performance coatings for metals or concrete. T...展开 Ara®Cool 1047 W80 is a special hardener for low temperature cure on metallic surfaces. It can be combines with liquid, semi-solid, or solid epoxy resins in solution for solvent-containing, ambient-curing high-performance coatings for metals or concrete. This product imparts good hardness, outstanding surface appearance, recoatability, flexibility, and adhesion. 收起 | |
| Ara®Cool 3077 | Huntsman Advanced Materials 亨斯迈先进材料 | AraCool 3077是一种不含壬基酚和苯甲醇的胺类快速固化剂。可单独使用，或与其它Aradur固化剂配合使用。可用于替换Aradur 3369和Aradur 14（含SVHC：被高度关注的物质）。配制的涂料有以下特点：较好的机械性能；很高的反应活性；在低温下具有好的漆膜外观；不含双酚A，不含苯酚，不含壬基酚或烷基酚；不含苯甲醇（低排放固化剂）。 | |
| Aradur® 340 Waterborne Epoxy Hardener | Huntsman Advanced Materials 亨斯迈先进材料 | Aradur®340水性环氧固化剂乳化液体环氧树脂，无需预乳化，即可制备水性高固含，常温固化涂料，适用于各种工业应用。另外，也可以结合Aradur®340水性环氧固化剂和环氧树脂乳液使用。 | |
| Aradur® 36 Epoxy Curing Agent | Huntsman Advanced Materials 亨斯迈先进材料 | Aradur® 36是一款水性环氧固化剂，可以与液体环氧树脂一起使用，例如Araldite GY9708-3、GY 776，也可以与环氧乳液一起使用，例如PZ 33757/67，应用于矿物及金属基材。当Aradur® 36与丙烯酸改性环氧搭配使用时，适用于较高耐紫外要求的面漆。 Aradur® 36与液体环氧乳液搭配还适用于环氧混凝土水泥。 | |
| Aradur® 38-1 Epoxy Curing Agent | Huntsman Advanced Materials 亨斯迈先进材料 | Aradur® 38-1 Epoxy Curing Agent is a formulated polyamine adduct, dissolved in water. Used with liquid epoxy resins such as Araldite® GY 776 Resin, or the emulsion PZ 33757/67, Aradur® 38-1 Epoxy Curing Agent is suitable for the formulation of water-dilut...展开 Aradur® 38-1 Epoxy Curing Agent is a formulated polyamine adduct, dissolved in water. Used with liquid epoxy resins such as Araldite® GY 776 Resin, or the emulsion PZ 33757/67, Aradur® 38-1 Epoxy Curing Agent is suitable for the formulation of water-dilutable coatings for application to mineral and metallic substrates. It is particularly suitable for solvent-free dispersion coatings with a high solids content. 收起 | |
| Aradur® 3805 Waterborne Epoxy Curing Agent | Huntsman Advanced Materials 亨斯迈先进材料 | 爱牢固® 3805 环氧固化剂是一种水性胺类固化剂，专为配制双组份室温及加热固化涂料而设计。它与改性及未改性液态环氧树脂 （如爱牢达® GY 9513 环氧树脂及爱牢达® GY9708-3 环氧树脂）均具有相容性。 | |
| Aradur® 39 Epoxy Curing Agent | Huntsman Advanced Materials 亨斯迈先进材料 | 爱牢固® 39 环氧固化剂是一种专为不含挥发性有机化合物（VOC）的双组份、室温固化涂料而设计的水性胺类固化剂。产品为50%固含量的水溶液（按供应形态），不含有机溶剂。该产品可以被水稀释至30%固量（重量），但可能变得浑浊。爱牢固 39 环氧固化剂不适于和固体树脂分散液共用，因为浇注膜不能充分聚结。与液体环氧树脂共用时，可形成零VOC、快速干燥、具有水汽穿透性能（呼吸性能）及粘接性的膜。 | |
| Aradur® 3951 | Huntsman Advanced Materials 亨斯迈先进材料 | Aradur® 3951是一款多官能度聚酰胺类固化剂，主要用于水可稀释型环氧树脂系统。Aradur® 3951是针对双组分金属防腐底漆配方而开发，用于金属富锌底漆以及底面一体涂料，应用范围涉及普通工业、船舶以及集装箱。当其与LPY15011、Araldite® PZ 3961-1等固体环氧分散体配合使用时，可以获得以下特点：低VOC含量、快速干燥、7小时的适用期以及优异的防腐能力。Aradur® 3951按照合适方法与锌粉配合后，可以稳定抑制氢气的产生。 | |
| Aradur® 3984 Epoxy Curing Agent | Huntsman Advanced Materials 亨斯迈先进材料 | Aradur® 3984 环氧固化剂是一支脂肪胺改性的水性固化剂，用于配制双组份室温固化或加热固化的涂料配方。 该产品不含有机溶剂，以 80%的水溶液形式供应。该产品可用水稀释，但当稀释至固含量低于 35%时会形成乳状液。 | |
| Aradur® 3985 Epoxy Curing Agent | Huntsman Advanced Materials 亨斯迈先进材料 | Aradur® 3985环氧固化剂供应方式是55％（重量比）固体在水中，不含有机溶剂或醋酸。该固化剂专为零VOC水性环氧底漆、密封剂、涂料、地坪漆等配方设计。 Aradur® 3985环氧固化剂与改性和未改性环氧树脂相容。基于Aradur® 3985环氧树脂固化剂的配方体系的使用寿命有“可见终点”（凝胶化）。它也可以作为改性剂用于水性固化剂，不会提供使用寿命“可见终点”。 | |
| Aradur® 3986 Epoxy Curing Agent | Huntsman Advanced Materials 亨斯迈先进材料 | 爱牢固®3986环氧固化剂是一种胺类固化剂，专门用于配制水可稀释环氧树脂体系。该产品不含挥发性胺类及溶剂，专为配制抗腐蚀底漆（例如，配合水性环氧树脂使用，如爱牢达® PZ 3961-1环氧树脂）及其它水性涂料而开发。爱牢固3986 环氧固化剂具有可见使用期结束的特性（通过粘度上升监测），并能提供快速固化、短表干时间、长操作时间等优势，适用于改性及未改性液体环氧树脂。 | |
| Aradur® 3987 | Huntsman Advanced Materials 亨斯迈先进材料 | Aradur® 3987 is a modified polyamine adduct dissolved in water. It is distinguished by high reactivity, short curing times, high chemical resistance, and high thermal resistance. This product can be used with liquid epoxy resins like Araldite® GY 776, liq...展开 Aradur® 3987 is a modified polyamine adduct dissolved in water. It is distinguished by high reactivity, short curing times, high chemical resistance, and high thermal resistance. This product can be used with liquid epoxy resins like Araldite® GY 776, liquid resin emulsions like Araldite® PZ 33757-67, or with solid type 1 resin dispersions like Araldite® PZ 3961-1 for the formulation of water-based coatings and layers onto mineral and metallic substrates. 收起 | |
| Aradur® 450 Hardener | Huntsman Advanced Materials 亨斯迈先进材料 | 爱牢固® 450 固化剂是一种低粘度固化剂，专为高湿度或湿环境应用而设计。爱牢固 450 固化剂可与液态双酚A和/或双酚F环氧树脂配合使用，能够为湿混凝土基材提供最佳性能。 | |
| Aradur® LME 11061 | Huntsman Advanced Materials 亨斯迈先进材料 | Aradur® LME 11061 is an aliphatic polyamine adduct (60% solids) in solution (xylene/butanol, 3/1). It offers tack-free films without pre-reaction, outstanding adhesion to metals, concrete and wood, and high flexibility. This product is recommended for sol...展开 Aradur® LME 11061 is an aliphatic polyamine adduct (60% solids) in solution (xylene/butanol, 3/1). It offers tack-free films without pre-reaction, outstanding adhesion to metals, concrete and wood, and high flexibility. This product is recommended for solvent-containing, ambient-curing high-performance coatings for metals or concrete. 收起 | |
| Aradur® LME 11134 | Huntsman Advanced Materials 亨斯迈先进材料 | Aradur® LME 11134 is a new generation polyamidoamine hardener in solution (90% solid). It offers good surface properties, outstanding adhesion to metals, and high flexibility of the cured films. This product is recommended for solvent-containing, ambient-...展开 Aradur® LME 11134 is a new generation polyamidoamine hardener in solution (90% solid). It offers good surface properties, outstanding adhesion to metals, and high flexibility of the cured films. This product is recommended for solvent-containing, ambient-curing high-performance coatings for metals or concrete. It can also be used for anti-corrosion coatings. 收起 | |
| Aradur® LME 11147 | Huntsman Advanced Materials 亨斯迈先进材料 | Aradur® LME 11147 is an isolated polyamine adduct (80% solid) in solution. It offers good surface properties, tack-free films, outstanding adhesion, high flexibility, and excellent chemical resistance. This product is recommended for solvent-containing, a...展开 Aradur® LME 11147 is an isolated polyamine adduct (80% solid) in solution. It offers good surface properties, tack-free films, outstanding adhesion, high flexibility, and excellent chemical resistance. This product is recommended for solvent-containing, ambient-curing high-performance coatings for metals or concrete. It can also be used for anti-corrosion coatings. 收起 | |
| Araldite® ECN 1400 Epoxy Resin | Huntsman Advanced Materials 亨斯迈先进材料 | 爱牢达®ECN 1400环氧树脂是一种稳定的，不发泡的高性能水性环氧甲酚酚醛树脂乳液。相比常规的双官能双酚A环氧树脂，环氧甲酚酚醛（ECN）树脂具有多个环氧官能团。 ECN树脂中的环氧官能度越高，能提供的交联密度也越高，这意味着更高的耐温性能，改进的耐化学品性能和比传统环氧树脂更好的附着力性能。 ECN树脂可以单独使用或结合常规环氧树脂使用，增强后者的性能。 ECN树脂可以均聚或与脂族族或芳香族胺，聚酰胺胺或者酸酐固化。它们也可以与羧基官能团聚酯和丙烯酸类树脂交联。 | |
| Araldite® PZ 323 Epoxy Resin | Huntsman Advanced Materials 亨斯迈先进材料 | 爱牢达®PZ 323环氧树脂是一种含水75％（重量比），环氧酚醛树脂的固体乳液。结合水性聚酰胺乳液，Aradur®340环氧树脂固化剂，Araldite PZ 323环氧树脂可配制不含有机溶剂和中和酸的水性体系。 | |
| Araldite® PZ 33757/67 | Huntsman Advanced Materials 亨斯迈先进材料 | Araldite® PZ 33757/67 is an emulsified, crystallization-resistant epoxy resin. Combined with virtually any water-dilutable hardener as a cross-linking agent, Araldite® PZ 33757-67 is a suitable epoxy resin component for surface technologies and adhesives ...展开 Araldite® PZ 33757/67 is an emulsified, crystallization-resistant epoxy resin. Combined with virtually any water-dilutable hardener as a cross-linking agent, Araldite® PZ 33757-67 is a suitable epoxy resin component for surface technologies and adhesives which can be diluted with water, or a suitable reactive component in epoxy cement mortars. This product has excellent compatibility with virtually all water-based hardeners. The end properties of such systems depend particularly on the choice of hardeners and additives used. 收起 | |
| Araldite® PZ 3961-1 Epoxy Resin | Huntsman Advanced Materials 亨斯迈先进材料 | 爱牢达®PZ 3961-1环氧树脂是一个“1型”固体环氧树脂乳液，它具有良好的综合性能，可用于金属或混凝土上的自干和烘干固化涂料。基于该乳液制成的金属涂料具有快速干燥时间，良好的附着力，柔韧性和耐腐蚀性。它可与各种爱牢固®水性环氧固化剂结合，配制成含低挥发性有机化合物（VOC）含量和具有广泛终端性能的涂料。 | |
| Araldite® PZ 3963 | Huntsman Advanced Materials 亨斯迈先进材料 | 爱牢达® PZ 3963 是一种可用水稀释的双酚 A 型环氧树脂。基于此产品的涂料产品，在配套Aradur 38-1 固化剂使用时，具有很好的加工性和施工性。 | |
| ExBar™ 200 | Excalibar Minerals LLC | ExBar™ 200 is a raw mineral material that is manufactured from natural barium sulfate ore. This product is used in many different applications such as paints, adhesives and sealants. It has a median particle size of 15.0u and an oil absorption of 9. | |
| ExBar™ 325 | Excalibar Minerals LLC | ExBar™ 325 is a raw mineral material that is manufactured from natural barium sulfate ore. This product is used in many different applications such as paints, adhesives and sealants. It has a median particle size of 10.0u and an oil absorption of 10. | |
| ExBar™ 400 | Excalibar Minerals LLC | ExBar™ 400 is a raw mineral material that is manufactured from natural barium sulfate ore. This product is used in many different applications such as paints, adhesives and sealants. It has a median particle size of 8.0u and an oil absorption of 12. | |
| ExBar™ W 1 | Excalibar Minerals LLC | ExBar™ W 1 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 1 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 1u and an oil absorption of 15. 收起 | |
| ExBar™ W 2 | Excalibar Minerals LLC | ExBar™ W 2 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 2 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 2u and an oil absorption of 13. 收起 | |
| ExBar™ W 3 | Excalibar Minerals LLC | ExBar™ W 3 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 3 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 3u and an oil absorption of 13. 收起 | |
| ExBar™ W 325 | Excalibar Minerals LLC | ExBar™ W 325 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are pr...展开 ExBar™ W 325 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. 收起 | |
| ExBar™ W 4 | Excalibar Minerals LLC | ExBar™ W 4 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 4 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 4u and an oil absorption of 12. 收起 | |
| ExBar™ W 400 | Excalibar Minerals LLC | ExBar™ W 400 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are pr...展开 ExBar™ W 400 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 8u and an oil absorption of 10. 收起 | |
| ExCal® 100 | Excalibar Minerals LLC | ExCal® 100 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications. | |
| ExCal® 200 | Excalibar Minerals LLC | ExCal® 200 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications. | |
| ExCal® 325 | Excalibar Minerals LLC | ExCal® 325 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications. | |
| ExCal® 400 | Excalibar Minerals LLC | ExCal® 400 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications. | |
| ExCal® CW 100 | Excalibar Minerals LLC | ExCal® CW 100 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand ar...展开 ExCal® CW 100 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand are a standard. 收起 | |
| ExCal® CW 200 | Excalibar Minerals LLC | ExCal® CW 200 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand ar...展开 ExCal® CW 200 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand are a standard. 收起 | |
| ExCal® CW 325 | Excalibar Minerals LLC | ExCal® CW 325 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand ar...展开 ExCal® CW 325 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand are a standard. 收起 | |
| Fujicure 205-L | Sanho Chemical Co., Ltd. | Fujicure 205-L is a modified cycloaliphatic curing agent in a light honey-colored liquid form. This product has a viscosity of less than 400-700 mPa.s. Fujicure 205-L is most commonly used in solvent-free paint formulation applications. | |
| Fujicure 4030 | Sanho Chemical Co., Ltd. | Fujicure 4030 is a modified aromatic polyamine epoxy curing agent in a brown-colored viscous liquid form. This product has a total solids content of 66-70%. Fujicure 4030 is most commonly used in epoxy paint formulation applications. | |
| Fujicure 4200 | Sanho Chemical Co., Ltd. | Fujicure 4200 is a modified cycloaliphatic polyamine curing agent in a light yellow-colored liquid form. This product has a viscosity of less than 1700-2700 mPa.s. Fujicure 4200 is most commonly used in coating formulation applications. | |
| Fujicure 4233 | Sanho Chemical Co., Ltd. | Fujicure 4233 is a low viscosity, modified cycloaliphatic polyamine curing agent in a light yellow-colored liquid form. This product has a viscosity of 650-900 mPa.s and a specific gravity of 0.95. Fujicure 4233 is most commonly used in coating formulatio...展开 Fujicure 4233 is a low viscosity, modified cycloaliphatic polyamine curing agent in a light yellow-colored liquid form. This product has a viscosity of 650-900 mPa.s and a specific gravity of 0.95. Fujicure 4233 is most commonly used in coating formulation applications. 收起 | |
| Fujicure 5000 | Sanho Chemical Co., Ltd. | Fujicure 5000 is a low viscosity, modified cycloaliphatic polyamine curing agent in a light yellow-colored viscous liquid form. This product has a viscosity of 800-2500 mPa.s and a specific gravity of 1.02. Fujicure 5000 is most commonly used in adhesive ...展开 Fujicure 5000 is a low viscosity, modified cycloaliphatic polyamine curing agent in a light yellow-colored viscous liquid form. This product has a viscosity of 800-2500 mPa.s and a specific gravity of 1.02. Fujicure 5000 is most commonly used in adhesive and solvent-based coating formulation applications. 收起 | |
| Fujicure 5003 | Sanho Chemical Co., Ltd. | Fujicure 5003 is a modified cycloaliphatic polyamine curing agent in a light yellow-colored viscous liquid form. This product has a viscosity of 3500-7500 mPa.s and a specific gravity of 1.08. Fujicure 5003 is most commonly used in coating formulation app...展开 Fujicure 5003 is a modified cycloaliphatic polyamine curing agent in a light yellow-colored viscous liquid form. This product has a viscosity of 3500-7500 mPa.s and a specific gravity of 1.08. Fujicure 5003 is most commonly used in coating formulation applications. 收起 | |
| Fujicure 5003-D | Sanho Chemical Co., Ltd. | Fujicure 5003-D is a modified cycloaliphatic amine in a light yellow-colored viscous liquid form. This product has a viscosity of 1000-2000 mPa.s and a specific gravity of 1.10. Fujicure 5003-D is most commonly used in coating formulation applications. | |
| Fujicure 5250 | Sanho Chemical Co., Ltd. | Fujicure 5250 is a modified cycloaliphatic polyamine in a light yellow-colored viscous liquid form. This product has a viscosity of 6000-14,000 mPa.s and a specific gravity of 1.10. Fujicure 5250 is most commonly used in coating formulation applications. | |
| Fujicure 5260 | Sanho Chemical Co., Ltd. | Fujicure 5260 is a modified cycloaliphatic polyamine in a light brown-colored viscous liquid form. This product has a viscosity of 1000-2000 mPa.s and a specific gravity of 1.03. Fujicure 5260 is most commonly used in epoxy mortar formulation applications...展开 Fujicure 5260 is a modified cycloaliphatic polyamine in a light brown-colored viscous liquid form. This product has a viscosity of 1000-2000 mPa.s and a specific gravity of 1.03. Fujicure 5260 is most commonly used in epoxy mortar formulation applications. 收起 | |
| Fujicure 5300 | Sanho Chemical Co., Ltd. | Fujicure 5300 is a modified cycloaliphatic polyamine epoxy curing agent in a light yellow-colored viscous liquid form. This product has a viscosity of 800-1700 mPa.s and a specific gravity of 1.02. Fujicure 5300 is most commonly used in adhesive and self-...展开 Fujicure 5300 is a modified cycloaliphatic polyamine epoxy curing agent in a light yellow-colored viscous liquid form. This product has a viscosity of 800-1700 mPa.s and a specific gravity of 1.02. Fujicure 5300 is most commonly used in adhesive and self-leveling coating formulation applications. 收起 | |
| Fujicure 5420 | Sanho Chemical Co., Ltd. | Fujicure 5420 is a modified cycloaliphatic polyamine epoxy curing agent in a light yellow-colored viscous liquid form. This product has a viscosity of 200-500 mPa.s and a specific gravity of 1.07. Fujicure 5420 is most commonly used in concrete adhesive f...展开 Fujicure 5420 is a modified cycloaliphatic polyamine epoxy curing agent in a light yellow-colored viscous liquid form. This product has a viscosity of 200-500 mPa.s and a specific gravity of 1.07. Fujicure 5420 is most commonly used in concrete adhesive formulation applications. 收起 | |
| Fujicure FX-220 | Sanho Chemical Co., Ltd. | Fujicure FX-220 is a modified cycloaliphatic polyamine epoxy curing agent in a light yellow-colored viscous liquid form. This product has a viscosity of 200-500 mPa.s and a specific gravity of 1.07. Fujicure FX-220 is most commonly used in coating and adh...展开 Fujicure FX-220 is a modified cycloaliphatic polyamine epoxy curing agent in a light yellow-colored viscous liquid form. This product has a viscosity of 200-500 mPa.s and a specific gravity of 1.07. Fujicure FX-220 is most commonly used in coating and adhesive formulation applications. 收起 | |
| Fujicure FXD-821 | Sanho Chemical Co., Ltd. | Fujicure FXD-821 is a modified aliphatic amine hardener in a light yellow-colored liquid form. This product has a viscosity of 40-70 mPa.s and a specific gravity of 0.95. Fujicure FXD-821 is most commonly used in surface coating, resin mortar, and adhesiv...展开 Fujicure FXD-821 is a modified aliphatic amine hardener in a light yellow-colored liquid form. This product has a viscosity of 40-70 mPa.s and a specific gravity of 0.95. Fujicure FXD-821 is most commonly used in surface coating, resin mortar, and adhesive formulation applications. 收起 | |
| Fujicure FXD-822 | Sanho Chemical Co., Ltd. | Fujicure FXD-822 is a modified cycloaliphatic amine epoxy curing agent in a light honey-colored liquid form. This product has a viscosity of 300-700 mPa.s and a specific gravity of 1.03. Fujicure FXD-822 is most commonly used in solvent-free coating and m...展开 Fujicure FXD-822 is a modified cycloaliphatic amine epoxy curing agent in a light honey-colored liquid form. This product has a viscosity of 300-700 mPa.s and a specific gravity of 1.03. Fujicure FXD-822 is most commonly used in solvent-free coating and mortar formulation applications. 收起 | |
| Fujicure FXK-832 | Sanho Chemical Co., Ltd. | Fujicure FXK-832 is a modified amine-type hardener in a light yellow-colored viscous liquid form. This product has a viscosity of 2000-5000 mPa.s and a specific gravity of 1.06. Fujicure FXK-832 is most commonly used in coating formulation applications. | |
| Fujicure FXM-823B | Sanho Chemical Co., Ltd. | Fujicure FXM-823B is a modified aromatic amine-based epoxy resin curing agent in a free flowing, reddish-brown-colored liquid form. This product has a viscosity of 1000-1400 mPa.s and a specific gravity of 1.16. Fujicure FXM-823B is most commonly used in ...展开 Fujicure FXM-823B is a modified aromatic amine-based epoxy resin curing agent in a free flowing, reddish-brown-colored liquid form. This product has a viscosity of 1000-1400 mPa.s and a specific gravity of 1.16. Fujicure FXM-823B is most commonly used in coal tar-epoxy coating applications. 收起 | |
| Fujicure FXM-824A | Sanho Chemical Co., Ltd. | Fujicure FXM-824A is a modified activated aromatic amine epoxy curing agent in a light honey-colored liquid form. This product has a viscosity of 2500-3500 mPa.s and a specific gravity of 1.13. Fujicure FXM-824A is most commonly used in tar and epoxy coat...展开 Fujicure FXM-824A is a modified activated aromatic amine epoxy curing agent in a light honey-colored liquid form. This product has a viscosity of 2500-3500 mPa.s and a specific gravity of 1.13. Fujicure FXM-824A is most commonly used in tar and epoxy coating formulation applications. 收起 | |
| Fujicure FXM-824B | Sanho Chemical Co., Ltd. | Fujicure FXM-824B is a modified activated aromatic amine epoxy curing agent in a light honey-colored liquid form. This product has a viscosity of 2000-3000 mPa.s and a specific gravity of 1.12. Fujicure FXM-824B is most commonly used in tar and epoxy coat...展开 Fujicure FXM-824B is a modified activated aromatic amine epoxy curing agent in a light honey-colored liquid form. This product has a viscosity of 2000-3000 mPa.s and a specific gravity of 1.12. Fujicure FXM-824B is most commonly used in tar and epoxy coating formulation applications. 收起 | |
| Fujicure FXR-1020 | Sanho Chemical Co., Ltd. | Fujicure FXR-1020 is a latent-type curing agent and accelerator in a light yellow-colored powder form. This product has a viscosity of 1200-2500 mPa.s. Fujicure FXR-1020 is most commonly used in powder coating formulation applications. | |
| Fujicure FXR-1030 | Sanho Chemical Co., Ltd. | Fujicure FXR-1030 is a latent-type epoxy resin curing agent and accelerator in a white-colored powder form. This product has a specific gravity of 1.09. Fujicure FXR-1030 is most commonly used in powder coating formulation applications. | |
| Fujicure FXR-1081 | Sanho Chemical Co., Ltd. | Fujicure FXR-1081 is a latent-type epoxy resin curing agent and accelerator in a white-colored powder form. This product has a specific gravity of 1.11. Fujicure FXR-1081 is most commonly used in powder coating formulation applications. | |
| Fujicure FXR-1090-FA | Sanho Chemical Co., Ltd. | Fujicure FXR-1090-FA is a latent-type epoxy resin curing agent and accelerator in a white-colored powder form. This product has a specific gravity of 1.11 and a softening point of 118°C. Fujicure FXR-1090-FA is most commonly used in powder coating formula...展开 Fujicure FXR-1090-FA is a latent-type epoxy resin curing agent and accelerator in a white-colored powder form. This product has a specific gravity of 1.11 and a softening point of 118°C. Fujicure FXR-1090-FA is most commonly used in powder coating formulation applications. 收起 | |
| Kingcure 100-BD | Sanho Chemical Co., Ltd. | Kingcure 100-BD is a modified aliphatic polyamine epoxy curing agent in a light yellow-colored liquid form. This product has a viscosity of 3000-6000 mPa.s. Kingcure 100-BD is most commonly used in solvent-free coating formulation applications. | |
| Kingcure 2010 | Sanho Chemical Co., Ltd. | Kingcure 2010 is a reactive polyamide epoxy resin curing agent in a light honey-colored viscous liquid form. This product has a viscosity of 1200-2000 mPa.s and a specific gravity of 0.96. Kingcure 2010 is most commonly used in concrete adhesive formulati...展开 Kingcure 2010 is a reactive polyamide epoxy resin curing agent in a light honey-colored viscous liquid form. This product has a viscosity of 1200-2000 mPa.s and a specific gravity of 0.96. Kingcure 2010 is most commonly used in concrete adhesive formulation applications. 收起 | |
| Kingcure 2040-MS | Sanho Chemical Co., Ltd. | Kingcure 2040-MS is a mannish-type epoxy resin hardener in a light honey-colored liquid form. This product has a viscosity of 2000-6000 mPa.s and a specific gravity of 1.08. Kingcure 2040-MS is most commonly used in fast-setting adhesive formulation appli...展开 Kingcure 2040-MS is a mannish-type epoxy resin hardener in a light honey-colored liquid form. This product has a viscosity of 2000-6000 mPa.s and a specific gravity of 1.08. Kingcure 2040-MS is most commonly used in fast-setting adhesive formulation applications. 收起 | |
| Kingcure 451-P | Sanho Chemical Co., Ltd. | Kingcure 451-P is a modified activated aromatic amine epoxy resin curing agent in a dark brown-colored liquid form. This product has a viscosity of 3000-8000 mPa.s and a specific gravity of 1.09. Kingcure 451-P is most commonly used in coating formulation...展开 Kingcure 451-P is a modified activated aromatic amine epoxy resin curing agent in a dark brown-colored liquid form. This product has a viscosity of 3000-8000 mPa.s and a specific gravity of 1.09. Kingcure 451-P is most commonly used in coating formulation applications. 收起 | |
| Kingcure 515-KD | Sanho Chemical Co., Ltd. | Kingcure 515-KD is a modified cycloaliphatic polyamine adduct curing agent in an amber-colored liquid form. This product has a viscosity of 300-700 mPa.s and a specific gravity of 1.01. Kingcure 515-KD is most commonly used in solvent-free coating and adh...展开 Kingcure 515-KD is a modified cycloaliphatic polyamine adduct curing agent in an amber-colored liquid form. This product has a viscosity of 300-700 mPa.s and a specific gravity of 1.01. Kingcure 515-KD is most commonly used in solvent-free coating and adhesive formulation applications. 收起 | |
| Kingcure 613-B | Sanho Chemical Co., Ltd. | Kingcure 613-B is a rapid room temperature modified polyamine curing agent in a light yellow-colored liquid form. This product has a viscosity of 30-100 mPa.s. Kingcure 613-B is most commonly used in solvent-free coating and adhesive formulation applicati...展开 Kingcure 613-B is a rapid room temperature modified polyamine curing agent in a light yellow-colored liquid form. This product has a viscosity of 30-100 mPa.s. Kingcure 613-B is most commonly used in solvent-free coating and adhesive formulation applications. 收起 | |
| Kingcure 800-C | Sanho Chemical Co., Ltd. | Kingcure 800-C is a mercaptan terminated polymer in a light yellow-colored liquid form. This product has a viscosity of 10,000-20,000 mPa.s. Kingcure 800-C is most commonly used in construction adhesive formulation applications. | |
| Kingcure 800-F | Sanho Chemical Co., Ltd. | Kingcure 800-F is a mercaptan terminated polymer in a light yellow-colored liquid form. This product has a slower gel time and a viscosity of 10,000-20,000 mPa.s. Kingcure 800-F is most commonly used in construction adhesive formulation applications. | |
| Kingcure 800-S | Sanho Chemical Co., Ltd. | Kingcure 800-S is a mercaptan terminated polymer in a light yellow-colored viscous liquid form. This product has a slower gel time and a viscosity of 10,000-20,000 mPa.s and a specific gravity of 1.13. Kingcure 800-S is most commonly used in mortar and fa...展开 Kingcure 800-S is a mercaptan terminated polymer in a light yellow-colored viscous liquid form. This product has a slower gel time and a viscosity of 10,000-20,000 mPa.s and a specific gravity of 1.13. Kingcure 800-S is most commonly used in mortar and fast-setting adhesive formulation applications. 收起 | |
| Kingcure 925 | Sanho Chemical Co., Ltd. | Kingcure 925 is a low viscosity, modified aliphatic polyamine epoxy curing agent in a light-colored liquid form. This product has a viscosity of less than 80 mPa.s and a specific gravity of 0.95. Kingcure 925 is most commonly used in laminate, mortar, adh...展开 Kingcure 925 is a low viscosity, modified aliphatic polyamine epoxy curing agent in a light-colored liquid form. This product has a viscosity of less than 80 mPa.s and a specific gravity of 0.95. Kingcure 925 is most commonly used in laminate, mortar, adhesive, and coating formulation applications. 收起 | |
| Kingcure A-611 | Sanho Chemical Co., Ltd. | Kingcure A-611 is a modified aliphatic polyamine adduct curing agent in an amber-colored liquid form. This product has a viscosity of 13-25 mPa.s and a specific gravity of 1.09. Kingcure A-611 is most commonly used in adhesive formulation applications. | |
| Kingcure B-311 | Sanho Chemical Co., Ltd. | Kingcure B-311 is a low viscosity, modified cycloaliphatic polyamine epoxy curing agent in a light yellow-colored liquid form. This product has a viscosity of 300-700 mPa.s. Kingcure B-311 is most commonly used in solvent-free coating formulation applicat...展开 Kingcure B-311 is a low viscosity, modified cycloaliphatic polyamine epoxy curing agent in a light yellow-colored liquid form. This product has a viscosity of 300-700 mPa.s. Kingcure B-311 is most commonly used in solvent-free coating formulation applications. 收起 | |
| Kingcure B-312 | Sanho Chemical Co., Ltd. | Kingcure B-312 is a modified cycloaliphatic polyamine epoxy curing agent in a light yellow-colored liquid form. This product has a viscosity of 30 mPa.s. Kingcure B-312 is most commonly used in solvent-free coating and adhesive formulation applications. | |
| Kingcure D-211 | Sanho Chemical Co., Ltd. | Kingcure D-211 is a modified aliphatic polyamine epoxy curing agent in an amber-colored liquid form. This product has a viscosity of 50-150 mPa.s. Kingcure D-211 is most commonly used in coating and adhesive formulation applications. | |
| Kingcure E-325 | Sanho Chemical Co., Ltd. | Kingcure E-325 is a modified cycloaliphatic polyamine in a light yellow-colored liquid form. This product has a viscosity of 30-100 mPa.s. Kingcure E-325 is most commonly used in solvent-free coating formulation applications. | |
| Kingcure I-621 | Sanho Chemical Co., Ltd. | Kingcure I-621 is a modified cycloaliphatic diamine in a slightly yellow-colored viscous liquid form. This product has a viscosity of 1500-2500 mPa.s and a specific gravity of 1.02. Kingcure I-621 is most commonly used in coating formulation applications. | |
| Kingcure I-631 | Sanho Chemical Co., Ltd. | Kingcure I-631 is a modified cycloaliphatic diamine in a light yellow-colored viscous liquid form. This product has a viscosity of 70-170 mPa.s and a specific gravity of 1.03. Kingcure I-631 is most commonly used in concrete adhesive formulation applicati...展开 Kingcure I-631 is a modified cycloaliphatic diamine in a light yellow-colored viscous liquid form. This product has a viscosity of 70-170 mPa.s and a specific gravity of 1.03. Kingcure I-631 is most commonly used in concrete adhesive formulation applications. 收起 | |
| Kingcure I-934 | Sanho Chemical Co., Ltd. | Kingcure I-934 is a modified aliphatic amine hardener in a light yellow-colored liquid form. This product has a viscosity of 80-200 mPa.s and a specific gravity of 1.02. Kingcure I-934 is most commonly used in surface coating, laminate, resin mortar, and ...展开 Kingcure I-934 is a modified aliphatic amine hardener in a light yellow-colored liquid form. This product has a viscosity of 80-200 mPa.s and a specific gravity of 1.02. Kingcure I-934 is most commonly used in surface coating, laminate, resin mortar, and adhesive formulation applications. 收起 | |
| Kingcure K-11 | Sanho Chemical Co., Ltd. | Kingcure K-11 is an accelerated aliphatic amine curing agent in an amber-colored liquid form. This product has a viscosity of 700-2400 mPa.s and a specific gravity of 1.04. Kingcure K-11 is most commonly used in adhesive formulation applications. | |
| Kingcure K-863A | Sanho Chemical Co., Ltd. | Kingcure K-863A is a mannish-type epoxy resin hardener in a light honey-colored liquid form. This product has a viscosity of 1000-2000 mPa.s and a specific gravity of 1.06. Kingcure K-863A is most commonly used in fast-setting adhesive formulation applica...展开 Kingcure K-863A is a mannish-type epoxy resin hardener in a light honey-colored liquid form. This product has a viscosity of 1000-2000 mPa.s and a specific gravity of 1.06. Kingcure K-863A is most commonly used in fast-setting adhesive formulation applications. 收起 | |
| Kingcure M-510 | Sanho Chemical Co., Ltd. | Kingcure M-510 is a modified activated aromatic amine curing agent in a dark brown-colored liquid form. This product has a viscosity of 500-2000 mPa.s and a specific gravity of 1.13. Kingcure M-510 is most commonly used in primer coating formulation appli...展开 Kingcure M-510 is a modified activated aromatic amine curing agent in a dark brown-colored liquid form. This product has a viscosity of 500-2000 mPa.s and a specific gravity of 1.13. Kingcure M-510 is most commonly used in primer coating formulation applications. 收起 | |
| Kingcure M-510BS | Sanho Chemical Co., Ltd. | Kingcure M-510BS is a modified activated aromatic amine curing agent in a dark brown-colored liquid form. This product has a viscosity of 300-700 mPa.s and a specific gravity of 1.13. Kingcure M-510BS is most commonly used in primer coating formulation ap...展开 Kingcure M-510BS is a modified activated aromatic amine curing agent in a dark brown-colored liquid form. This product has a viscosity of 300-700 mPa.s and a specific gravity of 1.13. Kingcure M-510BS is most commonly used in primer coating formulation applications. 收起 | |
| Kingcure M-530 | Sanho Chemical Co., Ltd. | Kingcure M-530 is a modified activated aromatic amine curing agent in a dark brown-colored liquid form. This product has a viscosity of 200-500 mPa.s and a specific gravity of 1.16. Kingcure M-530 is most commonly used in primer coating formulation applic...展开 Kingcure M-530 is a modified activated aromatic amine curing agent in a dark brown-colored liquid form. This product has a viscosity of 200-500 mPa.s and a specific gravity of 1.16. Kingcure M-530 is most commonly used in primer coating formulation applications. 收起 | |
| Kingcure N-768 | Sanho Chemical Co., Ltd. | Kingcure N-768 is a rapid room temperature epoxy resin curing agent in a light honey-colored liquid form. This product has a viscosity of 150-250 mPa.s. Kingcure N-768 is most commonly used in solvent-free coating and fast-setting adhesive formulation app...展开 Kingcure N-768 is a rapid room temperature epoxy resin curing agent in a light honey-colored liquid form. This product has a viscosity of 150-250 mPa.s. Kingcure N-768 is most commonly used in solvent-free coating and fast-setting adhesive formulation applications. 收起 | |
| Kingcure N-784 | Sanho Chemical Co., Ltd. | Kingcure N-784 is a rapid room temperature epoxy resin curing agent in a light yellow-colored liquid form. This product has a viscosity of 30-60 mPa.s and a specific gravity of 0.95. Kingcure N-784 is most commonly used in surface coating, resin mortar, l...展开 Kingcure N-784 is a rapid room temperature epoxy resin curing agent in a light yellow-colored liquid form. This product has a viscosity of 30-60 mPa.s and a specific gravity of 0.95. Kingcure N-784 is most commonly used in surface coating, resin mortar, laminate, and adhesive formulation applications. 收起 | |
| Kingcure T-642NA | Sanho Chemical Co., Ltd. | Kingcure T-642NA is a modified aliphatic polyamine curing agent in a light yellow-colored liquid form. This product has a viscosity of less than 80 mPa.s. Kingcure T-642NA is most commonly used in coating and adhesive formulation applications. | |
| Kingcure X-165A | Sanho Chemical Co., Ltd. | Kingcure X-165A is a rapid room temperature epoxy resin curing agent in a light yellow-colored liquid form. This product has a viscosity of 50-150 mPa.s and a specific gravity of 1.11. Kingcure X-165A is most commonly used in solvent-free coating formulat...展开 Kingcure X-165A is a rapid room temperature epoxy resin curing agent in a light yellow-colored liquid form. This product has a viscosity of 50-150 mPa.s and a specific gravity of 1.11. Kingcure X-165A is most commonly used in solvent-free coating formulation applications. 收起 | |
| Kingcure X-166K | Sanho Chemical Co., Ltd. | Kingcure X-166K is a low viscosity, modified aliphatic plyamine epoxy curing agent in a light yellow-colored liquid form. This product has a viscosity of 80-150 mPa.s and a specific gravity of 1.04. Kingcure X-166K is most commonly used in solvent-free co...展开 Kingcure X-166K is a low viscosity, modified aliphatic plyamine epoxy curing agent in a light yellow-colored liquid form. This product has a viscosity of 80-150 mPa.s and a specific gravity of 1.04. Kingcure X-166K is most commonly used in solvent-free coating formulation applications. 收起 | |
| Kingcure X-2001 | Sanho Chemical Co., Ltd. | Kingcure X-2001 is a mannish-type epoxy resin hardener in a light honey-colored liquid form. This product has a viscosity of 1200-2500 mPa.s and a specific gravity of 1.11. Kingcure X-2001 is most commonly used in concrete adhesive formulation application...展开 Kingcure X-2001 is a mannish-type epoxy resin hardener in a light honey-colored liquid form. This product has a viscosity of 1200-2500 mPa.s and a specific gravity of 1.11. Kingcure X-2001 is most commonly used in concrete adhesive formulation applications. 收起 | |
| Kingcure X-963 | Sanho Chemical Co., Ltd. | Kingcure X-963 is a mannish-type epoxy resin hardener in a light honey-colored liquid form. This product has a viscosity of 100-200 mPa.s and a specific gravity of 1.10. Kingcure X-963 is most commonly used in coating formulation applications. | |
| Kingcure X-980W | Sanho Chemical Co., Ltd. | Kingcure X-980W is a waterborne, modified polyamine curing agent in a light yellow-colored viscous liquid form. This product has a viscosity of 10,000-20,000 mPa.s and a specific gravity of 1.13. Kingcure X-980W is most commonly used in high-gloss coating...展开 Kingcure X-980W is a waterborne, modified polyamine curing agent in a light yellow-colored viscous liquid form. This product has a viscosity of 10,000-20,000 mPa.s and a specific gravity of 1.13. Kingcure X-980W is most commonly used in high-gloss coating formulation applications. 收起 | |
| Kingcure XD-230I | Sanho Chemical Co., Ltd. | Kingcure XD-230I is a low viscosity, rapid room temperature epoxy resin curing agent in a light yellow-colored liquid form. This product has a viscosity of 150-250 mPa.s and a specific gravity of 1.11. Kingcure XD-230I is most commonly used in solvent-fre...展开 Kingcure XD-230I is a low viscosity, rapid room temperature epoxy resin curing agent in a light yellow-colored liquid form. This product has a viscosity of 150-250 mPa.s and a specific gravity of 1.11. Kingcure XD-230I is most commonly used in solvent-free coating formulation applications. 收起 | |
| Kingmide 150-50 | Sanho Chemical Co., Ltd. | Kingmide 150-50 is a polyamide-type epoxy curing agent in a brown-colored viscous liquid form. This product has a total solids content of 48-52%. Kingmide 150-50 is most commonly used in primer coating formulation applications. | |
| Kingmide 300 | Sanho Chemical Co., Ltd. | Kingmide 300 is a high molecular weight, reactive polyamide resin in a brown-colored, viscous liquid form. This product has a viscosity of 200-600 mPa.s and a specific gravity of 0.97. Kingmide 300 is most commonly used in coating formulation applicatio...展开 Kingmide 300 is a high molecular weight, reactive polyamide resin in a brown-colored, viscous liquid form. This product has a viscosity of 200-600 mPa.s and a specific gravity of 0.97. Kingmide 300 is most commonly used in coating formulation applications where increased adhesion, chemical-resistance, and water-resistance are required. 收起 | |
| Kingmide 300-65 | Sanho Chemical Co., Ltd. | Kingmide 300-65 is a polyamide-type epoxy curing agent in a brown-colored viscous liquid form. This product has a total solids content of 63-67%. Kingmide 300-65 is most commonly used in heavy-duty primer coating formulation applications. | |
| Kingmide 305 | Sanho Chemical Co., Ltd. | Kingmide 305 is a polyaminoamide-type epoxy resin curing agent in a brown-colored, viscous liquid form. This product has a viscosity of 50,000-70,000 mPa.s and a specific gravity of 0.97. Kingmide 305 is most commonly used in adhesive formulation applicat...展开 Kingmide 305 is a polyaminoamide-type epoxy resin curing agent in a brown-colored, viscous liquid form. This product has a viscosity of 50,000-70,000 mPa.s and a specific gravity of 0.97. Kingmide 305 is most commonly used in adhesive formulation applications. 收起 | |
| Kingmide 305-31 | Sanho Chemical Co., Ltd. | Kingmide 305-31 is a polyamide-type epoxy resin curing agent in a brown-colored viscous liquid form. This product has a total solids content of 29-33%. Kingmide 305-31 is most commonly used in heavy-duty primer coating formulation applications. | |
| Kingmide 305-31MI | Sanho Chemical Co., Ltd. | Kingmide 305-31MI is a polyamide-type epoxy resin curing agent in a brown-colored viscous liquid form. This product has a total solids content of 29-33%. Kingmide 305-31MI is most commonly used in heavy-duty primer coating formulation applications. | |
| Kingmide 305-50 | Sanho Chemical Co., Ltd. | Kingmide 305-50 is a reactive polyamide-type epoxy resin curing agent in a brown-colored viscous liquid form. This product has a total solids content of 48-52%. Kingmide 305-50 is most commonly used in heavy-duty primer coating formulation applications. |
