UL Prospector

成功!

成功保存搜索结果
CARDIS™ 36 Baker Hughes (Baker Petrolite - Coatings) CARDIS™ 36 is an oxidized wax with low molecular weight used in imaging and coatings applications. CARDIS™ 36 has a melting point of 91 and a viscosity of 30 at 99°C. This product is used to emulsify into water-based systems, act as a co-emulsifier for hy...展开 CARDIS™ 36 is an oxidized wax with low molecular weight used in imaging and coatings applications. CARDIS™ 36 has a melting point of 91 and a viscosity of 30 at 99°C. This product is used to emulsify into water-based systems, act as a co-emulsifier for hydrocarbon waxes, provide reactive sites and improve solubility in polar solvents and resins. 收起
CERAMER™ 1251 Baker Hughes (Baker Petrolite - Coatings) CERAMER™ 1251 polymer is formed by grafting maleic anhydride derivatives onto hydrocarbon polymers in a manner that adds high levels of acid and ester functionality without significantly degrading the hydrocarbon backbone. CERAMER™ 1251 polymer has a melt...展开 CERAMER™ 1251 polymer is formed by grafting maleic anhydride derivatives onto hydrocarbon polymers in a manner that adds high levels of acid and ester functionality without significantly degrading the hydrocarbon backbone. CERAMER™ 1251 polymer has a melting point of 79 and a saponification number of 156. Despite a higher acid number than oxidized products, they are much harder with higher melting points. It is used in imaging and coatings applications to promote adhesion and bonding in thermal transfer inks, as a dispersant for pigments in thermal transfer inks and coatings, as a compatibilizer for polyolefin waxes into polyester and styrene-acrylic toners, and to promote low coefficient of friction in polishes. 收起
CERAMER™ 1608 Baker Hughes (Baker Petrolite - Coatings) CERAMER™ 1608 polymer is formed by grafting maleic anhydride derivatives onto hydrocarbon polymers in a manner that adds high levels of acid and ester functionality without significantly degrading the hydrocarbon backbone. CERAMER™ 1608 polymer has a melt...展开 CERAMER™ 1608 polymer is formed by grafting maleic anhydride derivatives onto hydrocarbon polymers in a manner that adds high levels of acid and ester functionality without significantly degrading the hydrocarbon backbone. CERAMER™ 1608 polymer has a melting point of 75 and a saponification number of 215. Despite a higher acid number than oxidized products, they are much harder with higher melting points. It is used in imaging and coatings applications to promote adhesion and bonding in thermal transfer inks, as a dispersant for pigments in thermal transfer inks and coatings, as a compatibilizer for polyolefin waxes into polyester and styrene-acrylic toners, and to promote low coefficient of friction in polishes. 收起
CERAMER™ 67 Baker Hughes (Baker Petrolite - Coatings) CERAMER™ 67 polymer is formed by grafting maleic anhydride derivatives onto hydrocarbon polymers in a manner that adds high levels of acid and ester functionality without significantly degrading the hydrocarbon backbone. CERAMER™ 67 polymer has a melting ...展开 CERAMER™ 67 polymer is formed by grafting maleic anhydride derivatives onto hydrocarbon polymers in a manner that adds high levels of acid and ester functionality without significantly degrading the hydrocarbon backbone. CERAMER™ 67 polymer has a melting point of 96 and a saponification number of 77. Despite a higher acid number than oxidized products, they are much harder with higher melting points. It is used in imaging and coatings applications to promote adhesion and bonding in thermal transfer inks, as a dispersant for pigments in thermal transfer inks and coatings, as a compatibilizer for polyolefin waxes into polyester and styrene-acrylic toners, and to promote low coefficient of friction in polishes. 收起
Cardanol T-60 Epoxy Curing Agent Shandong Huijin Chemical Co., Ltd. Cardanol T-60 Epoxy Curing Agent is a yellowish/brownish/red transparent viscous liquid that is non-toxic, and requires little to no dilution. Its main applications are to be in adhesives, sealants, anitiseptics, casting and laminated material. It has an ...展开 Cardanol T-60 Epoxy Curing Agent is a yellowish/brownish/red transparent viscous liquid that is non-toxic, and requires little to no dilution. Its main applications are to be in adhesives, sealants, anitiseptics, casting and laminated material. It has an excellent resistance to weather and corrosion, and has a viscosity level of =5000. 收起
Cardanol T-61 Epoxy Curing Agent Shandong Huijin Chemical Co., Ltd. Cardanol T-61 Epoxy Curing Agent is a yellowish/brownish/red transparent viscous liquid that is non-toxic, and requires little to no dilution. Its main applications are to be in anitiseptics,adhesives, sealants, casting and laminated material. It has an e...展开 Cardanol T-61 Epoxy Curing Agent is a yellowish/brownish/red transparent viscous liquid that is non-toxic, and requires little to no dilution. Its main applications are to be in anitiseptics,adhesives, sealants, casting and laminated material. It has an excellent resistance to weather and corrosion, and has a viscosity level of 800-1500. 收起
Cardanol T-62 Epoxy Curing Agent Shandong Huijin Chemical Co., Ltd. Cardanol T-62 Epoxy Curing Agent is a yellowish/brownish/red transparent viscous liquid that is non-toxic, and requires little to no dilution. Its main applications are to be in anitiseptics,adhesives, sealants, casting and laminated material. It has an g...展开 Cardanol T-62 Epoxy Curing Agent is a yellowish/brownish/red transparent viscous liquid that is non-toxic, and requires little to no dilution. Its main applications are to be in anitiseptics,adhesives, sealants, casting and laminated material. It has an good resistance to corrosion, weather, and has a viscosity level of 400-800. 收起
Conventional Dimer Acid HJ-126 Shandong Huijin Chemical Co., Ltd. Conventional Dimer Acid HJ-126 is a non-toxic solvent that has a high purity level. This compound is created from 18 carbon unsaturated acids via intermolecular forces. It also does not freeze in low temperatures and it is soluble in most organic solvent...展开 Conventional Dimer Acid HJ-126 is a non-toxic solvent that has a high purity level. This compound is created from 18 carbon unsaturated acids via intermolecular forces. It also does not freeze in low temperatures and it is soluble in most organic solvents. Dimer acid has stable performance and is also non-volatile, has a high flash point and fire point, good liquidity. This product is used as a component to make hot-melt adhesives. 收起
Conventional Dimer Acid HJ-136 Shandong Huijin Chemical Co., Ltd. Conventional Dimer Acid HJ-136 is a product that has a high purity level and is also non-toxic. This compound is created from 18 carbon unsaturated acids via intermolecular forces. Dimer acid has stable performance and is also non-volatile, has a high fla...展开 Conventional Dimer Acid HJ-136 is a product that has a high purity level and is also non-toxic. This compound is created from 18 carbon unsaturated acids via intermolecular forces. Dimer acid has stable performance and is also non-volatile, has a high flash point and fire point, good liquidity. It also does not freeze in low temperatures and it is soluble in most organic solvents.This product is used as a component to make hot-melt adhesives. 收起
Conventional Dimer Acid HJ-156 Shandong Huijin Chemical Co., Ltd. Conventional Dimer Acid HJ-156 is a product that has a high purity level and is also non-toxic. This compound is created from 18 carbon unsaturated acids via intermolecular forces. Dimer acid is a non-volatile substance that has stable performance, has a ...展开 Conventional Dimer Acid HJ-156 is a product that has a high purity level and is also non-toxic. This compound is created from 18 carbon unsaturated acids via intermolecular forces. Dimer acid is a non-volatile substance that has stable performance, has a high flash point and fire point and good liquidity. It is soluble in most organic solvents and also does not freeze in low temperatures. This product is used as a component to make hot-melt adhesives. 收起
Conventional Dimer Acid HJ-166 Shandong Huijin Chemical Co., Ltd. Conventional Dimer Acid HJ-156 is a product that has a high purity level and is also non-toxic. This compound is created from 18 carbon unsaturated acids via intermolecular forces. It is primarily used as a component to make hot-melt adhesives. Dimer acid...展开 Conventional Dimer Acid HJ-156 is a product that has a high purity level and is also non-toxic. This compound is created from 18 carbon unsaturated acids via intermolecular forces. It is primarily used as a component to make hot-melt adhesives. Dimer acid is a non-volatile substance that has stable performance, has a high flash point and fire point and good liquidity. It is soluble in most organic solvents and also does not freeze in low temperatures. 收起
DIAX™ 2770 Baker Hughes (Baker Petrolite - Coatings) DIAX™ 2770 is a hyperbranched hydrocarbon polymer that is a liquid at room temperature used in imaging and coatings applications. When used in solvent based coating and ink formulations, DIAX 2770 polymer promotes surface quality by reducing defects assoc...展开 DIAX™ 2770 is a hyperbranched hydrocarbon polymer that is a liquid at room temperature used in imaging and coatings applications. When used in solvent based coating and ink formulations, DIAX 2770 polymer promotes surface quality by reducing defects associated with foaming. Product is intended for use in polyester, PVDC, and epoxy based systems. The purpose of the product is to reduce surface defects of coatings and inks while being soluble in common coating and ink solvents and being easily incorporated in coating and inks systems. 收起
Epoxy Resin 8132 Shandong Huijin Chemical Co., Ltd. Epoxy Resin 8132 is a polymer that is formed by reacting epoxide units. When this product is cross-linked or hardened with compatible curing agents, it forms excellent adhesive, mechanical, chemical and dielectric resistance properties. Epoxy Resin 8132...展开 Epoxy Resin 8132 is a polymer that is formed by reacting epoxide units. When this product is cross-linked or hardened with compatible curing agents, it forms excellent adhesive, mechanical, chemical and dielectric resistance properties. Epoxy Resin 8132 is a highly versatile substance which has become a standard when used in formulation, fabrication and fusion technology. It is specially designed for applications requiring low viscosity, minimal odor and good color. This product is best utilized as an adhesive for flooring, crack injection systems, exposed aggregate wall matrix and wet lay up laminates. 收起
Epoxy Resin HJ828 Shandong Huijin Chemical Co., Ltd. Epoxy Resin HJ828 is a polymer that is formed by reacting epoxide units. When this product is cross-linked or hardened with compatible curing agents, it forms excellent mechanical, adhesive, dielectric and chemical resistance properties. Epoxy Resin is a ...展开 Epoxy Resin HJ828 is a polymer that is formed by reacting epoxide units. When this product is cross-linked or hardened with compatible curing agents, it forms excellent mechanical, adhesive, dielectric and chemical resistance properties. Epoxy Resin is a highly versatile substance which has become a standard when used in formulation, fabrication and fusion technology. This product is best utilized as an adhesive and structural material. 收起
ExBar™ 200 Excalibar Minerals LLC ExBar™ 200 is a raw mineral material that is manufactured from natural barium sulfate ore. This product is used in many different applications such as paints, adhesives and sealants. It has a median particle size of 15.0u and an oil absorption of 9.
ExBar™ 325 Excalibar Minerals LLC ExBar™ 325 is a raw mineral material that is manufactured from natural barium sulfate ore. This product is used in many different applications such as paints, adhesives and sealants. It has a median particle size of 10.0u and an oil absorption of 10.
ExBar™ 400 Excalibar Minerals LLC ExBar™ 400 is a raw mineral material that is manufactured from natural barium sulfate ore. This product is used in many different applications such as paints, adhesives and sealants. It has a median particle size of 8.0u and an oil absorption of 12.
ExBar™ W 1 Excalibar Minerals LLC ExBar™ W 1 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 1 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 1u and an oil absorption of 15. 收起
ExBar™ W 2 Excalibar Minerals LLC ExBar™ W 2 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 2 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 2u and an oil absorption of 13. 收起
ExBar™ W 3 Excalibar Minerals LLC ExBar™ W 3 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 3 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 3u and an oil absorption of 13. 收起
ExBar™ W 325 Excalibar Minerals LLC ExBar™ W 325 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are pr...展开 ExBar™ W 325 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. 收起
ExBar™ W 4 Excalibar Minerals LLC ExBar™ W 4 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 4 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 4u and an oil absorption of 12. 收起
ExBar™ W 400 Excalibar Minerals LLC ExBar™ W 400 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are pr...展开 ExBar™ W 400 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 8u and an oil absorption of 10. 收起
ExCal® 100 Excalibar Minerals LLC ExCal® 100 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications.
ExCal® 200 Excalibar Minerals LLC ExCal® 200 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications.
ExCal® 325 Excalibar Minerals LLC ExCal® 325 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications.
ExCal® 400 Excalibar Minerals LLC ExCal® 400 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications.
ExCal® CW 100 Excalibar Minerals LLC ExCal® CW 100 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand ar...展开 ExCal® CW 100 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand are a standard. 收起
ExCal® CW 200 Excalibar Minerals LLC ExCal® CW 200 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand ar...展开 ExCal® CW 200 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand are a standard. 收起
ExCal® CW 325 Excalibar Minerals LLC ExCal® CW 325 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand ar...展开 ExCal® CW 325 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand are a standard. 收起
HJT-31A Epoxy Resin Curing Agent Shandong Huijin Chemical Co., Ltd. HJT-31A Epoxy Resin Curing Agent is created from a reaction with phenolic resin modified EDA. This product can cure very fast and has a low toxicity level. It can cure at around 0*Celsius so it has a very good resistance to temperature. The curing film ha...展开 HJT-31A Epoxy Resin Curing Agent is created from a reaction with phenolic resin modified EDA. This product can cure very fast and has a low toxicity level. It can cure at around 0*Celsius so it has a very good resistance to temperature. The curing film has good salt-resistance, alkali-resistance, salt-resistance and is highly impermiable. This product can best be used in water proofing projects, pipeline prime coatings, ship industrial paint prime coatings, flooring coatings and adhesives. It has a viscosity level of 500-1500. 收起
HJT-31B Epoxy Resin Curing Agent Shandong Huijin Chemical Co., Ltd. HJT-31B Epoxy Resin Curing Agent is created from a reaction with phenolic resin modified EDA. This product can cure very fast has a low toxicity level. It can cure at around 0*Celsius so it has a very good resistance to temperature. The curing film has go...展开 HJT-31B Epoxy Resin Curing Agent is created from a reaction with phenolic resin modified EDA. This product can cure very fast has a low toxicity level. It can cure at around 0*Celsius so it has a very good resistance to temperature. The curing film has good alkali-resistance, salt-resistance and is highly impermiable. This product can best be used in water proofing projects, pipeline prime coatings, ship industrial paint prime coatings, flooring coatings and adhesives. It has a viscosity level of 200-1000. 收起
HJT-31C Epoxy Resin Curing Agent Shandong Huijin Chemical Co., Ltd. HJT-31C Epoxy Resin Curing Agent is created from a reaction with phenolic resin modified EDA. This product can cure very fast and has a low toxicity level. It can cure at around 0*Celsius so it has a very good resistance to temperature. The curing film ha...展开 HJT-31C Epoxy Resin Curing Agent is created from a reaction with phenolic resin modified EDA. This product can cure very fast and has a low toxicity level. It can cure at around 0*Celsius so it has a very good resistance to temperature. The curing film has good alkali-resistance, salt-resistance and is highly impermiable. This product can best be used in water proofing projects, pipeline prime coatings, ship industrial paint prime coatings, flooring coatings and adhesives. It has a viscosity level of 1000-3000. 收起
HJT-31D Epoxy Resin Curing Agent Shandong Huijin Chemical Co., Ltd. HJT-31D Epoxy Resin Curing Agent is created from a reaction with phenolic resin modified EDA. This product can cure very fast and has a low toxicity level. It has a very good resistance to temperature so it can cure at around 0*Celsius. The curing film is...展开 HJT-31D Epoxy Resin Curing Agent is created from a reaction with phenolic resin modified EDA. This product can cure very fast and has a low toxicity level. It has a very good resistance to temperature so it can cure at around 0*Celsius. The curing film is highly impermiable, has good alkali-resistance and salt-resistance. This product can best be used in water proofing projects, pipeline prime coatings, ship industrial paint prime coatings, flooring coatings and adhesives. It has a viscosity level of 200-600. 收起
High Purity Dimer Acid HJ-13 Shandong Huijin Chemical Co., Ltd. High Purity Dimer Acid HJ-13 is a yellow transparent viscous liquid that is primarily used to compose hot melt adhesives. It is a raw material that has a high level of purity and it is non-toxic and non-volatile. It also does not freeze in cold conditions...展开 High Purity Dimer Acid HJ-13 is a yellow transparent viscous liquid that is primarily used to compose hot melt adhesives. It is a raw material that has a high level of purity and it is non-toxic and non-volatile. It also does not freeze in cold conditions and is highly soluble. 收起
Monomer Acid Shandong Huijin Chemical Co., Ltd. Monomer Acid is a white or yellowish oil-like solid that is soluble in most organic solvents but it is insoluble in water. It is made from rectified plant oleic acid by adopting advanced polymerization technology and molecular distillation technology. Thi...展开 Monomer Acid is a white or yellowish oil-like solid that is soluble in most organic solvents but it is insoluble in water. It is made from rectified plant oleic acid by adopting advanced polymerization technology and molecular distillation technology. This product is to be mainly used in making alkyd resin coating, isomeric acid, cosmetics and pharmaceutical intermediates. 收起
PETROLITE C-7500 Baker Hughes (Baker Petrolite - Coatings) PETROLITE™ C-7500 is an oxidized polymer with low molecular weight used in imaging and coatings applications. PETROLITE™ C-7500 has a melting point of 97 and a viscosity of 70 at 116°C. This product is used to emulsify into water-based systems, act as a c...展开 PETROLITE™ C-7500 is an oxidized polymer with low molecular weight used in imaging and coatings applications. PETROLITE™ C-7500 has a melting point of 97 and a viscosity of 70 at 116°C. This product is used to emulsify into water-based systems, act as a co-emulsifier for hydrocarbon waxes, provide reactive sites and improve solubility in polar solvents and resins. 收起
PETROLITE™ C-8500 Baker Hughes (Baker Petrolite - Coatings) PETROLITE™ C-8500 is an oxidized polymer with low molecular weight used in imaging and coatings applications. PETROLITE™ C-8500 has a melting point of 95 and a viscosity of 40 at 116°C. This product is used to emulsify into water-based systems, act as a c...展开 PETROLITE™ C-8500 is an oxidized polymer with low molecular weight used in imaging and coatings applications. PETROLITE™ C-8500 has a melting point of 95 and a viscosity of 40 at 116°C. This product is used to emulsify into water-based systems, act as a co-emulsifier for hydrocarbon waxes, provide reactive sites and improve solubility in polar solvents and resins. 收起
PETROLITE™ C-9500 Baker Hughes (Baker Petrolite - Coatings) PETROLITE™ C-9500 is an oxidized polymer with low molecular weight used in imaging and coatings applications. PETROLITE™ C-9500 has a melting point of 95 and a viscosity of 16 at 116°C. This product is used to emulsify into water-based systems, act as a c...展开 PETROLITE™ C-9500 is an oxidized polymer with low molecular weight used in imaging and coatings applications. PETROLITE™ C-9500 has a melting point of 95 and a viscosity of 16 at 116°C. This product is used to emulsify into water-based systems, act as a co-emulsifier for hydrocarbon waxes, provide reactive sites and improve solubility in polar solvents and resins. 收起
PETROLITE™ D-1038 Baker Hughes (Baker Petrolite - Coatings) PETROLITE™ D-1038 is a dispersant used in imaging and coatings applications to disperse a variety of pigments in water based coating and ink systems. This dispersant is based on an ethoxylated polymer with an HLB of 18. PETROLITE™ D-1038 is VOC free and h...展开 PETROLITE™ D-1038 is a dispersant used in imaging and coatings applications to disperse a variety of pigments in water based coating and ink systems. This dispersant is based on an ethoxylated polymer with an HLB of 18. PETROLITE™ D-1038 is VOC free and has a viscosity of 30. 收起
PETROLITE™ E-2020 Baker Hughes (Baker Petrolite - Coatings) PETROLITE™ E-2020 is an oxidized polymer with low molecular weight used in imaging and coatings applications. PETROLITE™ E-2020 has a melting point of 116 and a viscosity of 75 at 149°C. This product is used to emulsify into water-based systems, act as a ...展开 PETROLITE™ E-2020 is an oxidized polymer with low molecular weight used in imaging and coatings applications. PETROLITE™ E-2020 has a melting point of 116 and a viscosity of 75 at 149°C. This product is used to emulsify into water-based systems, act as a co-emulsifier for hydrocarbon waxes, provide reactive sites and improve solubility in polar solvents and resins. 收起
PETROLITE™ EP-700 Baker Hughes (Baker Petrolite - Coatings) PETROLITE™ EP-700 is a copolymer of propylene and ethylene. The addition of propylene results in short chain branching, which reduces the polymer’s crystallinity. PETROLITE™ EP-700 has a melting point of 96 and a viscosity of 12 at 99°C. This copolymer ha...展开 PETROLITE™ EP-700 is a copolymer of propylene and ethylene. The addition of propylene results in short chain branching, which reduces the polymer’s crystallinity. PETROLITE™ EP-700 has a melting point of 96 and a viscosity of 12 at 99°C. This copolymer has a narrow molecular weight distribution and the branching provides a more flexible and softer polymer with solvent solubility. The targeted end uses of this copolymer is to promote anti-block, release aid, and slip aid in thermoplastic elastomers and for hot melt adhesives applications. 收起
PETRONAUBA™ C Baker Hughes (Baker Petrolite - Coatings) PETRONAUBA™ C is an oxidized polymer with low molecular weight used in imaging and coatings applications. PETRONAUBA™ C has a melting point of 93 and a viscosity of 26 at 99°C. This product is used to emulsify into water-based systems, act as a co-emulsif...展开 PETRONAUBA™ C is an oxidized polymer with low molecular weight used in imaging and coatings applications. PETRONAUBA™ C has a melting point of 93 and a viscosity of 26 at 99°C. This product is used to emulsify into water-based systems, act as a co-emulsifier for hydrocarbon waxes, provide reactive sites and improve solubility in polar solvents and resins. 收起
POLYWAX™ 1000 Baker Hughes (Baker Petrolite - Coatings) POLYWAX™ 1000 is a fully saturated homopolymer of ethylene that exhibits linearity and crystallinity in imaging and coatings applications. POLYWAX™ 1000 has a melting point of 113 and a viscosity of 15. It exhibits a sharp melting point, fast recrystalliz...展开 POLYWAX™ 1000 is a fully saturated homopolymer of ethylene that exhibits linearity and crystallinity in imaging and coatings applications. POLYWAX™ 1000 has a melting point of 113 and a viscosity of 15. It exhibits a sharp melting point, fast recrystallization, low melt viscosity, heat stability, and resistance to chemical attack. The end uses for this product include anti-block, release aid, scratch and mar, slip aid, and thermal viscosity control. 收起
POLYWAX™ 2000 Baker Hughes (Baker Petrolite - Coatings) POLYWAX™ 2000 is a fully saturated homopolymer of ethylene that exhibits linearity and crystallinity in imaging and coatings applications. POLYWAX™ 2000 has a melting point of 126 and a viscosity of 55. It exhibits a sharp melting point, fast recrystalliz...展开 POLYWAX™ 2000 is a fully saturated homopolymer of ethylene that exhibits linearity and crystallinity in imaging and coatings applications. POLYWAX™ 2000 has a melting point of 126 and a viscosity of 55. It exhibits a sharp melting point, fast recrystallization, low melt viscosity, heat stability, and resistance to chemical attack. The end uses for this product include anti-block, release aid, scratch and mar, slip aid, and thermal viscosity control. 收起
POLYWAX™ 3000 Baker Hughes (Baker Petrolite - Coatings) POLYWAX™ 3000 is a fully saturated homopolymer of ethylene that exhibits linearity and crystallinity in imaging and coatings applications. POLYWAX™ 3000 has a melting point of 129 and a viscosity of 130. It exhibits a sharp melting point, fast recrystalli...展开 POLYWAX™ 3000 is a fully saturated homopolymer of ethylene that exhibits linearity and crystallinity in imaging and coatings applications. POLYWAX™ 3000 has a melting point of 129 and a viscosity of 130. It exhibits a sharp melting point, fast recrystallization, low melt viscosity, heat stability, and resistance to chemical attack. The end uses for this product include anti-block, release aid, scratch and mar, slip aid, and thermal viscosity control. 收起
POLYWAX™ 400 Baker Hughes (Baker Petrolite - Coatings) POLYWAX™ 400 is a fully saturated homopolymer of ethylene that exhibits linearity and crystallinity in imaging and coatings applications. POLYWAX™ 400 has a melting point of 81 and a viscosity of 7. It exhibits a sharp melting point, fast recrystallizatio...展开 POLYWAX™ 400 is a fully saturated homopolymer of ethylene that exhibits linearity and crystallinity in imaging and coatings applications. POLYWAX™ 400 has a melting point of 81 and a viscosity of 7. It exhibits a sharp melting point, fast recrystallization, low melt viscosity, heat stability, and resistance to chemical attack. The end uses for this product include anti-block, release aid, scratch and mar, slip aid, and thermal viscosity control. 收起
POLYWAX™ 500 Baker Hughes (Baker Petrolite - Coatings) POLYWAX™ 500 is a fully saturated homopolymer of ethylene that exhibits linearity and crystallinity in imaging and coatings applications. POLYWAX™ 500 has a melting point of 88 and a viscosity of 8.5. It exhibits a sharp melting point, fast recrystallizat...展开 POLYWAX™ 500 is a fully saturated homopolymer of ethylene that exhibits linearity and crystallinity in imaging and coatings applications. POLYWAX™ 500 has a melting point of 88 and a viscosity of 8.5. It exhibits a sharp melting point, fast recrystallization, low melt viscosity, heat stability, and resistance to chemical attack. The end uses for this product include anti-block, release aid, scratch and mar, slip aid, and thermal viscosity control. 收起
POLYWAX™ 600 Baker Hughes (Baker Petrolite - Coatings) POLYWAX™ 600 is a fully saturated homopolymer of ethylene that exhibits linearity and crystallinity in imaging and coatings applications. POLYWAX™ 600 has a melting point of 94 and a viscosity of 10. It exhibits a sharp melting point, fast recrystallizati...展开 POLYWAX™ 600 is a fully saturated homopolymer of ethylene that exhibits linearity and crystallinity in imaging and coatings applications. POLYWAX™ 600 has a melting point of 94 and a viscosity of 10. It exhibits a sharp melting point, fast recrystallization, low melt viscosity, heat stability, and resistance to chemical attack. The end uses for this product include anti-block, release aid, scratch and mar, slip aid, and thermal viscosity control. 收起
POLYWAX™ 655 Baker Hughes (Baker Petrolite - Coatings) POLYWAX™ 655 is a fully saturated homopolymer of ethylene that exhibits linearity and crystallinity in imaging and coatings applications. POLYWAX™ 655 has a melting point of 99 and a viscosity of 7. It exhibits a sharp melting point, fast recrystallizatio...展开 POLYWAX™ 655 is a fully saturated homopolymer of ethylene that exhibits linearity and crystallinity in imaging and coatings applications. POLYWAX™ 655 has a melting point of 99 and a viscosity of 7. It exhibits a sharp melting point, fast recrystallization, low melt viscosity, heat stability, and resistance to chemical attack. The end uses for this product include anti-block, release aid, scratch and mar, slip aid, and thermal viscosity control. 收起
POLYWAX™ 725 Baker Hughes (Baker Petrolite - Coatings) POLYWAX™ 725 is a fully saturated homopolymer of ethylene that exhibits linearity and crystallinity in imaging and coatings applications. POLYWAX™ 725 has a melting point of 104 and a viscosity of 10. It exhibits a sharp melting point, fast recrystallizat...展开 POLYWAX™ 725 is a fully saturated homopolymer of ethylene that exhibits linearity and crystallinity in imaging and coatings applications. POLYWAX™ 725 has a melting point of 104 and a viscosity of 10. It exhibits a sharp melting point, fast recrystallization, low melt viscosity, heat stability, and resistance to chemical attack. The end uses for this product include anti-block, release aid, scratch and mar, slip aid, and thermal viscosity control. 收起
POLYWAX™ 850 Baker Hughes (Baker Petrolite - Coatings) POLYWAX™ 850 is a fully saturated homopolymer of ethylene that exhibits linearity and crystallinity in imaging and coatings applications. POLYWAX™ 850 has a melting point of 107 and a viscosity of 10. It exhibits a sharp melting point, fast recrystallizat...展开 POLYWAX™ 850 is a fully saturated homopolymer of ethylene that exhibits linearity and crystallinity in imaging and coatings applications. POLYWAX™ 850 has a melting point of 107 and a viscosity of 10. It exhibits a sharp melting point, fast recrystallization, low melt viscosity, heat stability, and resistance to chemical attack. The end uses for this product include anti-block, release aid, scratch and mar, slip aid, and thermal viscosity control. 收起
Polyamide Resin HJ-1014 Shandong Huijin Chemical Co., Ltd. Polyamide Resin HJ-1014 is a co-solvent product that is mainly used in paper printing inks and in gravure plastic printing inks. It has good adhesion on polyethylene materials. The ink that is made using this material has excellent adhesion, high gloss an...展开 Polyamide Resin HJ-1014 is a co-solvent product that is mainly used in paper printing inks and in gravure plastic printing inks. It has good adhesion on polyethylene materials. The ink that is made using this material has excellent adhesion, high gloss and a low freezing point. 收起
Polyamide Resin HJ-1417 Shandong Huijin Chemical Co., Ltd. Polyamide Resin HJ-1417 is a co-solvent product that is mainly used in gravure plastic printing inks and paper printing inks. It has good adhesion on polyethylene materials. The ink that is made using this material has good adhesion, high gloss and a low ...展开 Polyamide Resin HJ-1417 is a co-solvent product that is mainly used in gravure plastic printing inks and paper printing inks. It has good adhesion on polyethylene materials. The ink that is made using this material has good adhesion, high gloss and a low freezing point. 收起
Polyamide Resin HJ-1720 Shandong Huijin Chemical Co., Ltd. Polyamide Resin HJ-1720 is a co-solvent product that is mainly used in gravure plastic printing inks and paper printing inks. It also has good adhesion on polyethylene materials. The ink that is made using this product has excellent adhesion, high gloss a...展开 Polyamide Resin HJ-1720 is a co-solvent product that is mainly used in gravure plastic printing inks and paper printing inks. It also has good adhesion on polyethylene materials. The ink that is made using this product has excellent adhesion, high gloss and a low freezing point. 收起
Polyamide Resin HJ-2000 Shandong Huijin Chemical Co., Ltd. Polyamide Resin HJ-2000 is an alcohol soluble product that is mainly used in paper printing inks and gravure plastic printing inks. It also has good adhesion on polyethylene materials. The ink that is made using this product has excellent adhesion with a ...展开 Polyamide Resin HJ-2000 is an alcohol soluble product that is mainly used in paper printing inks and gravure plastic printing inks. It also has good adhesion on polyethylene materials. The ink that is made using this product has excellent adhesion with a high gloss and a low freezing point. 收起
Polyamide Resin HJ-588B Shandong Huijin Chemical Co., Ltd. Polyamide Resin HJ-588B is co-solvent product that is mainly used in paper printing inks and gravure plastic printing inks. It also has good adhesion on polyethylene materials. The ink that is made using this product has excellent adhesion with a high glo...展开 Polyamide Resin HJ-588B is co-solvent product that is mainly used in paper printing inks and gravure plastic printing inks. It also has good adhesion on polyethylene materials. The ink that is made using this product has excellent adhesion with a high gloss and has a good resistance to low temperatures. 收起
Polyamide Resin HJ-588C Shandong Huijin Chemical Co., Ltd. Polyamide Resin HJ-588C is an alcohol soluble substance that is primarily used in paper printing inks and gravure plastic printing inks. It also has good adhesion on polyethylene materials. The ink that is made using this product has excellent adhesion wi...展开 Polyamide Resin HJ-588C is an alcohol soluble substance that is primarily used in paper printing inks and gravure plastic printing inks. It also has good adhesion on polyethylene materials. The ink that is made using this product has excellent adhesion with a high gloss and has a good resistance to low temperatures. 收起
Polyamide Resin HJ-688B Shandong Huijin Chemical Co., Ltd. Polyamide Resin HJ-688B is primarily used in paper printing inks, gravure plastic printing inks and is co-solvent. It also has good adhesion on polyethylene materials and has a good resistance to low tempertatures. The ink that is made using this product ...展开 Polyamide Resin HJ-688B is primarily used in paper printing inks, gravure plastic printing inks and is co-solvent. It also has good adhesion on polyethylene materials and has a good resistance to low tempertatures. The ink that is made using this product has excellent adhesion with a high gloss. 收起
Polyamide Resin HJ-688C Shandong Huijin Chemical Co., Ltd. Polyamide Resin HJ-688C is primarily used in paper printing inks, gravure plastic printing inks and is alcohol soluble. It also has good adhesion on polyethylene materials and has a good resistance to low tempertatures. The ink that is made using this pro...展开 Polyamide Resin HJ-688C is primarily used in paper printing inks, gravure plastic printing inks and is alcohol soluble. It also has good adhesion on polyethylene materials and has a good resistance to low tempertatures. The ink that is made using this product has excellent adhesion with a high gloss. 收起
Polyamide Resin HJ-7010 Shandong Huijin Chemical Co., Ltd. Polyamide Resin H-7010 is a product that is mainly used in gravure plastic printing inks and also paper printing inks. It has good adhesion on polyethylene materials. The ink that is made using this material has excellent adhesion, high gloss and low free...展开 Polyamide Resin H-7010 is a product that is mainly used in gravure plastic printing inks and also paper printing inks. It has good adhesion on polyethylene materials. The ink that is made using this material has excellent adhesion, high gloss and low freezing point. 收起
Reactive Polyamide Resin 300 Shandong Huijin Chemical Co., Ltd. Reactive Polyamide Resin 300 is a light yellow transparent thick liquid which can be used as an anti-corrosion coating. It is also widely used in epoxy glue, antisepsis coatings and anti rust paint. This product also has adhesion and good curing qualities...展开 Reactive Polyamide Resin 300 is a light yellow transparent thick liquid which can be used as an anti-corrosion coating. It is also widely used in epoxy glue, antisepsis coatings and anti rust paint. This product also has adhesion and good curing qualities with an excellent resistance to impact. The 300 grade has more use as an adhesive and anti-corrosion coating. 收起
Reactive Polyamide Resin 400 (651) Shandong Huijin Chemical Co., Ltd. Reactive Polyamide Resin 400 (651) is a light yellow transparent thick liquid which can be used as an anti-corrosion coating. It is also widely used in epoxy glue, antisepsis coatings and anti rust paint. This product also has adhesion and good curing qua...展开 Reactive Polyamide Resin 400 (651) is a light yellow transparent thick liquid which can be used as an anti-corrosion coating. It is also widely used in epoxy glue, antisepsis coatings and anti rust paint. This product also has adhesion and good curing qualities with an excellent resistance to impact. This grade of the product (400) has more uses as a component to make adhesives and anti-corrosion coatings. 收起
Reactive Polyamide Resin 650 Shandong Huijin Chemical Co., Ltd. Reactive Polyamide Resin 650 is a light yellow transparent thick liquid which can be used as an anti-corrosion coating, an epoxy primer and coated mortar. It is also widely used in epoxy glue, antisepsis coatings and anti-rust paint. This product also ha...展开 Reactive Polyamide Resin 650 is a light yellow transparent thick liquid which can be used as an anti-corrosion coating, an epoxy primer and coated mortar. It is also widely used in epoxy glue, antisepsis coatings and anti-rust paint. This product also has good curing and adhesion qualities with an excellent resistance to impact. 收起
Reactive Polyamide Resin 650B Shandong Huijin Chemical Co., Ltd. Reactive Polyamide Resin 650B is widely used in epoxy glue, antisepsis coatings and anti rust paint. It is a light yellow transparent thick liquid which can be used as an anti-corrosion coating. This product also has adhesion and good curing qualities wit...展开 Reactive Polyamide Resin 650B is widely used in epoxy glue, antisepsis coatings and anti rust paint. It is a light yellow transparent thick liquid which can be used as an anti-corrosion coating. This product also has adhesion and good curing qualities with an excellent resistance to impact. 收起
UNICID™ 350 Baker Hughes (Baker Petrolite - Coatings) UNICID™ 350 is a long chain, linear primary carboxylic acid used in imaging and coatings applications. UNICID™ 350 has a melting point of 92 and a viscosity of 4. The purpose of UNICID™ 350 is to compatibilize with functional/polar polymers, increase adhe...展开 UNICID™ 350 is a long chain, linear primary carboxylic acid used in imaging and coatings applications. UNICID™ 350 has a melting point of 92 and a viscosity of 4. The purpose of UNICID™ 350 is to compatibilize with functional/polar polymers, increase adhesion to polar surfaces, disperse in water, act as a co-emulsifier in anionic systems, and react to create unique derivatives. The carbon backbone of this acid allows it to manage odor and volatility and form films in water-in-oil emulsions. 收起
UNICID™ 550 Baker Hughes (Baker Petrolite - Coatings) UNICID™ 550 is a long chain, linear primary carboxylic acid used in imaging and coatings applications. UNICID™ 550 has a melting point of 101 and a viscosity of 8. The purpose of UNICID™ 550 is to compatibilize with functional/polar polymers, increase adh...展开 UNICID™ 550 is a long chain, linear primary carboxylic acid used in imaging and coatings applications. UNICID™ 550 has a melting point of 101 and a viscosity of 8. The purpose of UNICID™ 550 is to compatibilize with functional/polar polymers, increase adhesion to polar surfaces, disperse in water, act as a co-emulsifier in anionic systems, and react to create unique derivatives. The carbon backbone of this acid allows it to manage odor and volatility and form films in water-in-oil emulsions. 收起
UNICID™ 700 Baker Hughes (Baker Petrolite - Coatings) UNICID™ 700 is a long chain, linear primary carboxylic acid used in imaging and coatings applications. UNICID™ 700 has a melting point of 110 and a viscosity of 12. The purpose of UNICID™ 700 is to compatibilize with functional/polar polymers, increase ad...展开 UNICID™ 700 is a long chain, linear primary carboxylic acid used in imaging and coatings applications. UNICID™ 700 has a melting point of 110 and a viscosity of 12. The purpose of UNICID™ 700 is to compatibilize with functional/polar polymers, increase adhesion to polar surfaces, disperse in water, act as a co-emulsifier in anionic systems, and react to create unique derivatives. The carbon backbone of this acid allows it to manage odor and volatility and form films in water-in-oil emulsions. 收起
UNILIN™ 350 Baker Hughes (Baker Petrolite - Coatings) UNILIN™ 350 is a fully saturated, long chain, linear primary alcohol used in imaging and coatings applications. UNILIN™ 350 has a melting point of 78 and a viscosity of 3. The function of this alcohol is to compatibilize with polar polymers and react to f...展开 UNILIN™ 350 is a fully saturated, long chain, linear primary alcohol used in imaging and coatings applications. UNILIN™ 350 has a melting point of 78 and a viscosity of 3. The function of this alcohol is to compatibilize with polar polymers and react to form derivatives. The linear carbon backbone of this alcohol is designed for compatibility with hydrocarbons and to provide solvent resistance in coatings. The low polydispersity of this product controls the melting point while lowering the melt viscosity. 收起
UNILIN™ 425 Baker Hughes (Baker Petrolite - Coatings) UNILIN™ 425 is a fully saturated, long chain, linear primary alcohol used in imaging and coatings applications. UNILIN™ 425 has a melting point of 91 and a viscosity of 4. The function of this alcohol is to compatibilize with polar polymers and react to f...展开 UNILIN™ 425 is a fully saturated, long chain, linear primary alcohol used in imaging and coatings applications. UNILIN™ 425 has a melting point of 91 and a viscosity of 4. The function of this alcohol is to compatibilize with polar polymers and react to form derivatives. The linear carbon backbone of this alcohol is designed for compatibility with hydrocarbons and to provide solvent resistance in coatings. The low polydispersity of this product controls the melting point while lowering the melt viscosity. 收起
UNILIN™ 550 Baker Hughes (Baker Petrolite - Coatings) UNILIN™ 550 is a fully saturated, long chain, linear primary alcohol used in imaging and coatings applications. UNILIN™ 550 has a melting point of 99 and a viscosity of 6. The function of this alcohol is to compatibilize with polar polymers and react to f...展开 UNILIN™ 550 is a fully saturated, long chain, linear primary alcohol used in imaging and coatings applications. UNILIN™ 550 has a melting point of 99 and a viscosity of 6. The function of this alcohol is to compatibilize with polar polymers and react to form derivatives. The linear carbon backbone of this alcohol is designed for compatibility with hydrocarbons and to provide solvent resistance in coatings. The low polydispersity of this product controls the melting point while lowering the melt viscosity. 收起
UNILIN™ 700 Baker Hughes (Baker Petrolite - Coatings) UNILIN™ 700 is a fully saturated, long chain, linear primary alcohol used in imaging and coatings applications. UNILIN™ 700 has a melting point of 105 and a viscosity of 8. The function of this alcohol is to compatibilize with polar polymers and react to ...展开 UNILIN™ 700 is a fully saturated, long chain, linear primary alcohol used in imaging and coatings applications. UNILIN™ 700 has a melting point of 105 and a viscosity of 8. The function of this alcohol is to compatibilize with polar polymers and react to form derivatives. The linear carbon backbone of this alcohol is designed for compatibility with hydrocarbons and to provide solvent resistance in coatings. The low polydispersity of this product controls the melting point while lowering the melt viscosity. 收起
VYBAR™ C-6112 Baker Hughes (Baker Petrolite - Coatings) VYBAR™ C-6112 is a polymer that combines acid functionality with a hyberbranched structure for use in imaging and coatings applications. The acid functionality allows for compatibility in polar systems, adhesion to polar surfaces, and the ability to emuls...展开 VYBAR™ C-6112 is a polymer that combines acid functionality with a hyberbranched structure for use in imaging and coatings applications. The acid functionality allows for compatibility in polar systems, adhesion to polar surfaces, and the ability to emulsify with neutralization. The hyperbranched structure allows VYBAR™ C-6112 to act as an oil binder for high oil content waxes and a crystal modifier for polymers and waxes. 收起