| #14 Sta-Brite | PCI Group, Inc. | #14 Sta-Brite is a clear, octadecanoic acid product, designed to enhance leafing aluminum in enamel and related systems. Improves the uniformity and brightness, leafing and leaf retention of all systems commonly used as leafing aluminum coatings. | |
| #249 HI-TECH | PCI Group, Inc. | #249 HI-TECH is a clear blend of Alkyl-Aryl modified silicones. It is designed for high solids coating systems to improve mar resistance without the standard recoat problems. Designed for use in virtually all high solids solvent-borne systems. | |
| 901-GDA-2 | PCI Group, Inc. | 901-GDA-2 is a clear, silicone-free polyvinyl isobutyl ether solution used to improve color development, leveling and gloss while controlling surface flooding and floating. It can be used with acrylic resin, alkyd (long, medium and short oils), polyamide,...展开 901-GDA-2 is a clear, silicone-free polyvinyl isobutyl ether solution used to improve color development, leveling and gloss while controlling surface flooding and floating. It can be used with acrylic resin, alkyd (long, medium and short oils), polyamide, polyester and urethane for pigmented and non-pigmented systems. 收起 | |
| 941 LBA | PCI Group, Inc. | 941 LBA is a clear, linear polydimethylsiloxane polymer designed for use in systems containing non-leafing aluminums. It provides higher brightness, controlled uniformity and burnishing and helps prevent “black” float. | |
| AMA | PCI Group, Inc. | AMA is a clear-colored dimethyl silicone which improves mar resistance and reduces surface tension in conventional solvent based coatings. Systems include: acrylic resins, alkyd, epoxy, lacquer, phenolic, polyester and urethane. It is recommended for clea...展开 AMA is a clear-colored dimethyl silicone which improves mar resistance and reduces surface tension in conventional solvent based coatings. Systems include: acrylic resins, alkyd, epoxy, lacquer, phenolic, polyester and urethane. It is recommended for clear topcoats. 收起 | |
| AMAFCA | PCI Group, Inc. | AMAFCA is a clear-colored Alkyl-Aryl silicone designed control foaming during application. It also promotes improved mar resistance for virtually all solvent based coating systems. It can control foaming in roller coater, flow coater, curtain coater, dip,...展开 AMAFCA is a clear-colored Alkyl-Aryl silicone designed control foaming during application. It also promotes improved mar resistance for virtually all solvent based coating systems. It can control foaming in roller coater, flow coater, curtain coater, dip, conventional and airless spray systems. 收起 | |
| AMMA | PCI Group, Inc. | AMMA is a non-ionic, clear-colored polyalkyeneoxide-modified polydimethylsiloxane developed for high solids / high solids metallic coatings. It helps prevent mottling, enhances color uniformity and increases the sharpness of gloss. Systems include: acryl...展开 AMMA is a non-ionic, clear-colored polyalkyeneoxide-modified polydimethylsiloxane developed for high solids / high solids metallic coatings. It helps prevent mottling, enhances color uniformity and increases the sharpness of gloss. Systems include: acrylic resins, alkyds, epoxy, melamine, phenolic, polyamide, polyester, urea and urethane. 收起 | |
| APACA | PCI Group, Inc. | APACA is a clear, non-ionic modified dimethyl polysiloxane co-polymer solution for use in water-borne and water-reducible products. It will assist in the reduction of surface defects by altering the surface tension of the coating. It will also increase gl...展开 APACA is a clear, non-ionic modified dimethyl polysiloxane co-polymer solution for use in water-borne and water-reducible products. It will assist in the reduction of surface defects by altering the surface tension of the coating. It will also increase gloss, slip and mar resistance. 收起 | |
| ASAFA | PCI Group, Inc. | ASAFA is a pale amber colored blend of a dimethyl silicone and refined naphthenic base oil. Designed for use in conventional systems such as acrylic resins, alkyds, polyamide, polyester and urethane. It acts to control silking, flooding and pigment float ...展开 ASAFA is a pale amber colored blend of a dimethyl silicone and refined naphthenic base oil. Designed for use in conventional systems such as acrylic resins, alkyds, polyamide, polyester and urethane. It acts to control silking, flooding and pigment float while sharpening gloss, improving pigment wetting and enhancing leveling. 收起 | |
| ASAFA #3 | PCI Group, Inc. | ASAFA #3 is a clear-colored linear polydimethylsiloxane polymer used where floating or silking is a problem. It effectively balances out solvents during the air dry process. It can be used in coating systems such as alkyds, modified alkyds, acrylics, epox...展开 ASAFA #3 is a clear-colored linear polydimethylsiloxane polymer used where floating or silking is a problem. It effectively balances out solvents during the air dry process. It can be used in coating systems such as alkyds, modified alkyds, acrylics, epoxies, vinyls and most oleo-resinous non-aqueous systems. 收起 | |
| ASAFAMA | PCI Group, Inc. | ASAFAMA is a clear-colored, highly-modified silicone fluid designed for use in systems where a dimethyl silicone may be a problem. It is useful for enhancing the defoaming properties of applied coatings, and sharpens gloss, improves color acceptance and i...展开 ASAFAMA is a clear-colored, highly-modified silicone fluid designed for use in systems where a dimethyl silicone may be a problem. It is useful for enhancing the defoaming properties of applied coatings, and sharpens gloss, improves color acceptance and improves mar resistance without recoating problems. 收起 | |
| ASASWA | PCI Group, Inc. | ASASWA is a light amber, highly modified reactive polyamide resin solution. It can be used in acid-catalyzed, alkyds (short, medium and long oils), epoxy, epoxy ester, polyurethane and high solids polyester systems. It increases resistance to sag, allows ...展开 ASASWA is a light amber, highly modified reactive polyamide resin solution. It can be used in acid-catalyzed, alkyds (short, medium and long oils), epoxy, epoxy ester, polyurethane and high solids polyester systems. It increases resistance to sag, allows for enhanced pigment wetting and color development and eliminates hard settling. 收起 | |
| ASLA | PCI Group, Inc. | ASLA is a clear, silicone-free, polyvinyl ethyl ether solution used to improve color development, leveling and gloss while controllling surface flooding and floating. It can be used in acrylic resins, alkyds (long, med., short oils), polyamide, polyester ...展开 ASLA is a clear, silicone-free, polyvinyl ethyl ether solution used to improve color development, leveling and gloss while controllling surface flooding and floating. It can be used in acrylic resins, alkyds (long, med., short oils), polyamide, polyester and urethane pigmented and non-pigmented systems. 收起 | |
| C-485-FBRA | PCI Group, Inc. | C-485-FBRA is a clear alkyl-aryl air release agent which acts as a foam and bubble release agent. It is compatible with conventional systems: acrylic resins, alkyds, lacquers, melamine, phenolic, polyamide, polyester and urethane. It also acts to improve ...展开 C-485-FBRA is a clear alkyl-aryl air release agent which acts as a foam and bubble release agent. It is compatible with conventional systems: acrylic resins, alkyds, lacquers, melamine, phenolic, polyamide, polyester and urethane. It also acts to improve leveling and slip. 收起 | |
| CHEM-REZ A-1050 | PCI Group, Inc. | CHEM-REZ A-1050 is a clear poly vinyl ethyl isoburyl ether solution recommended for use in most conventional and high solid coating systems. It increases adhesion and flexibility, improves flow and leveling, acts as a plasticizer for coatings and inks and...展开 CHEM-REZ A-1050 is a clear poly vinyl ethyl isoburyl ether solution recommended for use in most conventional and high solid coating systems. It increases adhesion and flexibility, improves flow and leveling, acts as a plasticizer for coatings and inks and is useful in dip and flow coater systems. 收起 | |
| CLAWB | PCI Group, Inc. | CLAWB is a clear, colorless liquid comprised of and epoxy functional silane which serves as a crosslinker and adhesion promoter. It is intended for formulations containing acrylic latexes and polyurethane dispersions with carboxy or amino functionality. W...展开 CLAWB is a clear, colorless liquid comprised of and epoxy functional silane which serves as a crosslinker and adhesion promoter. It is intended for formulations containing acrylic latexes and polyurethane dispersions with carboxy or amino functionality. Waterborne coating formulations using CLAWB show improved solvent, impact and mar resistance, superior wet and dry adhesion, gloss retention upon aging and improved stain resistance in wood coatings. 收起 | |
| CSV-3000 | PCI Group, Inc. | CSV-3000 is a thixotropic, milky white oil emulsion intended for blending with high Tg acrylic and polyurethane emulsions. The end product will provide semi-transparent concrete stains. It is intended to penetrate and seal the surface, minimizing water tr...展开 CSV-3000 is a thixotropic, milky white oil emulsion intended for blending with high Tg acrylic and polyurethane emulsions. The end product will provide semi-transparent concrete stains. It is intended to penetrate and seal the surface, minimizing water transmission. The basic film properties are determined by the added emulsion. 收起 | |
| ExBar™ 200 | Excalibar Minerals LLC | ExBar™ 200 is a raw mineral material that is manufactured from natural barium sulfate ore. This product is used in many different applications such as paints, adhesives and sealants. It has a median particle size of 15.0u and an oil absorption of 9. | |
| ExBar™ 325 | Excalibar Minerals LLC | ExBar™ 325 is a raw mineral material that is manufactured from natural barium sulfate ore. This product is used in many different applications such as paints, adhesives and sealants. It has a median particle size of 10.0u and an oil absorption of 10. | |
| ExBar™ 400 | Excalibar Minerals LLC | ExBar™ 400 is a raw mineral material that is manufactured from natural barium sulfate ore. This product is used in many different applications such as paints, adhesives and sealants. It has a median particle size of 8.0u and an oil absorption of 12. | |
| ExBar™ W 1 | Excalibar Minerals LLC | ExBar™ W 1 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 1 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 1u and an oil absorption of 15. 收起 | |
| ExBar™ W 2 | Excalibar Minerals LLC | ExBar™ W 2 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 2 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 2u and an oil absorption of 13. 收起 | |
| ExBar™ W 3 | Excalibar Minerals LLC | ExBar™ W 3 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 3 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 3u and an oil absorption of 13. 收起 | |
| ExBar™ W 325 | Excalibar Minerals LLC | ExBar™ W 325 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are pr...展开 ExBar™ W 325 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. 收起 | |
| ExBar™ W 4 | Excalibar Minerals LLC | ExBar™ W 4 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 4 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 4u and an oil absorption of 12. 收起 | |
| ExBar™ W 400 | Excalibar Minerals LLC | ExBar™ W 400 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are pr...展开 ExBar™ W 400 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 8u and an oil absorption of 10. 收起 | |
| ExCal® 100 | Excalibar Minerals LLC | ExCal® 100 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications. | |
| ExCal® 200 | Excalibar Minerals LLC | ExCal® 200 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications. | |
| ExCal® 325 | Excalibar Minerals LLC | ExCal® 325 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications. | |
| ExCal® 400 | Excalibar Minerals LLC | ExCal® 400 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications. | |
| ExCal® CW 100 | Excalibar Minerals LLC | ExCal® CW 100 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand ar...展开 ExCal® CW 100 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand are a standard. 收起 | |
| ExCal® CW 200 | Excalibar Minerals LLC | ExCal® CW 200 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand ar...展开 ExCal® CW 200 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand are a standard. 收起 | |
| ExCal® CW 325 | Excalibar Minerals LLC | ExCal® CW 325 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand ar...展开 ExCal® CW 325 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand are a standard. 收起 | |
| FCABA 2 | PCI Group, Inc. | FCABA 2 is a slightly cloudy blend of silicone and organic acid esters. It can be used in most non-aqueous based coating systems, adhesives and inks. It will prevent bubble and foaming in flow coat, curtain coater, dip, roller coater, conventional and air...展开 FCABA 2 is a slightly cloudy blend of silicone and organic acid esters. It can be used in most non-aqueous based coating systems, adhesives and inks. It will prevent bubble and foaming in flow coat, curtain coater, dip, roller coater, conventional and airless spray applications. It is stable over a wide temperature range. 收起 | |
| FSDS | PCI Group, Inc. | FSDS is a clear liquid comprised of a blend of fluorosurfactant diols. It is intended to provide improved flow, leveling and reduced surface waviness and orange peel without associated air entrainment problems. It reduces the need for multiple additives b...展开 FSDS is a clear liquid comprised of a blend of fluorosurfactant diols. It is intended to provide improved flow, leveling and reduced surface waviness and orange peel without associated air entrainment problems. It reduces the need for multiple additives by acting as a de-aerator and flow / leveling agent. It is well suited for clear formulations and readily miscible with alkyds, polyesters, cellulosics, acrylics and high solids coating systems. 收起 | |
| HSADA-42 | PCI Group, Inc. | HSADA-42 is a clear fluoroaliphatic polymeric ester used in solvent, high solids and UV curable coating systems. It is non-ionic and works to reduce or eliminate problems associated with surface tension such as craters, fisheyes, picture framing and orang...展开 HSADA-42 is a clear fluoroaliphatic polymeric ester used in solvent, high solids and UV curable coating systems. It is non-ionic and works to reduce or eliminate problems associated with surface tension such as craters, fisheyes, picture framing and orange peel. HSADA-42 is active throughout the curing process and demonstrates significantly less foam development than many other fluorosurfactants. 收起 | |
| HSADA-44 | PCI Group, Inc. | HSADA-44 is a clear, fluoroaliphatic polymeric ester used in solvent, high solids and aqueous coating systems. It is non-ionic and works to reduce or eliminate problems associated with surface tension such as craters, fish-eyes, picture framing and orange...展开 HSADA-44 is a clear, fluoroaliphatic polymeric ester used in solvent, high solids and aqueous coating systems. It is non-ionic and works to reduce or eliminate problems associated with surface tension such as craters, fish-eyes, picture framing and orange peel. HSADA-44 is active throughout the curing process and demonstrates significantly less foam development than other fluorosurfactants. 收起 | |
| HSWADA | PCI Group, Inc. | HSWADA is an amber-colored blend of a pale tall oil fatty acid with moderate rosin acid content and an anionic wetting and dispersing agent. It improves substrate wetting, enhances viscosity stability and prevents hard settling while increasing the pigmen...展开 HSWADA is an amber-colored blend of a pale tall oil fatty acid with moderate rosin acid content and an anionic wetting and dispersing agent. It improves substrate wetting, enhances viscosity stability and prevents hard settling while increasing the pigment grinding speed. It is designed for systems such as alkyds, drying oils, amino resins, vinyls, acrylics, oil modified urethanes, polyesters, and epoxy esters. 收起 | |
| HSWADA-60 | PCI Group, Inc. | HSWADA-60 is an amber colored blend of a functional capped amine with tall oil fatty acid. The resulting product is a wetting agent with high efficiency toward alkaline based pigments. It can be used with alkyd, drying oil, amino resin, vinyl, acrylic, oi...展开 HSWADA-60 is an amber colored blend of a functional capped amine with tall oil fatty acid. The resulting product is a wetting agent with high efficiency toward alkaline based pigments. It can be used with alkyd, drying oil, amino resin, vinyl, acrylic, oil modified urethane, polyester, epoxy, and epoxy ester coating systems. 收起 | |
| HSWADA-B | PCI Group, Inc. | HSWADA-B is an amber colored blend of amine chemistry with dimerized acids. The resulting product is a wetting agent with high efficiency toward acidic based pigments. It has an affinity for alkaline pigments. It can be used with alkyd, drying oil, amino ...展开 HSWADA-B is an amber colored blend of amine chemistry with dimerized acids. The resulting product is a wetting agent with high efficiency toward acidic based pigments. It has an affinity for alkaline pigments. It can be used with alkyd, drying oil, amino resin, vinyl, acrylic, oil modified urethane, polyester, epoxy, epoxy ester and polyester coating systems. 收起 | |
| LH-75 | PCI Group, Inc. | LH-75 is a slightly yellow amide polymer modifier additive that will improve depth of image (wet-look), enhance gloss, increase hardness and scratch resistance and will improve resin compatibility and flow. It can be used in many types of lacquers includi...展开 LH-75 is a slightly yellow amide polymer modifier additive that will improve depth of image (wet-look), enhance gloss, increase hardness and scratch resistance and will improve resin compatibility and flow. It can be used in many types of lacquers including nitrocellulose, acrylic, polyurethane and acid-catalyzed varnishes. It is also effective in polyester / melamine systems. It is not recommended in systems with a high level of aliphatic hydrocarbons. 收起 | |
| MFA 31 | PCI Group, Inc. | MFA 31 is a non-ionic, clear, recoatable polyalkyeneoxide modified polydimethylsiloxane developed for water-borne and water-reducible systems. It can be used to eliminate film defects, such as craters, through refined flow and leveling. It also enhances c...展开 MFA 31 is a non-ionic, clear, recoatable polyalkyeneoxide modified polydimethylsiloxane developed for water-borne and water-reducible systems. It can be used to eliminate film defects, such as craters, through refined flow and leveling. It also enhances color uniformity and allows for sharper gloss. 收起 | |
| NOFO 1032 | PCI Group, Inc. | NOFO 1032 is a blend of clear silicone and organic acid esters. It is used in most non-aqueous based coating systems, adhesives and inks. It fosters the release of air from high build epoxy, urethane, and casting resins. It is stable over a wide temperatu...展开 NOFO 1032 is a blend of clear silicone and organic acid esters. It is used in most non-aqueous based coating systems, adhesives and inks. It fosters the release of air from high build epoxy, urethane, and casting resins. It is stable over a wide temperature range and will not cause surface defects associated with most silicone defoamers. 收起 | |
| NVOCF-WB | PCI Group, Inc. | NVOCF-WB is a clear liquid, non-ionic, water soluble fluorosurfactant designed to improve flow, leveling and surface appearance of water based coating systems. It contains no volatile organic components, has excellent water solubility and is recommended f...展开 NVOCF-WB is a clear liquid, non-ionic, water soluble fluorosurfactant designed to improve flow, leveling and surface appearance of water based coating systems. It contains no volatile organic components, has excellent water solubility and is recommended for use in clear coatings. NVOCF-WB can be added at any point during the manufacturing and/or use processes. 收起 | |
| OWSS | PCI Group, Inc. | OWSS is a non-ionic, clear liquid which acts as a multifunctional solubilizer and surfactant. It can be used in a wide range of products and applications including paint & coatings, water based degreasers and printing inks. | |
| RAMA | PCI Group, Inc. | RAMA is a recoatable, clear-colored blend of Alkyl-Aryl modified silicones. It is used to improve mar resistance without the standard recoat problems of common silicones. It can be used in virtually all solvent-borne systems to reduce flooding and floatin...展开 RAMA is a recoatable, clear-colored blend of Alkyl-Aryl modified silicones. It is used to improve mar resistance without the standard recoat problems of common silicones. It can be used in virtually all solvent-borne systems to reduce flooding and floating, improve flow, sharpen gloss and improve slip. 收起 | |
| SA #1 | PCI Group, Inc. | SA #1 is a clear-colored silicone blend useful in high solids coatings. Its primary function is to improve flow and leveling during application, including elimination of bubbles during application, reducing orange peel and improving the final product's ma...展开 SA #1 is a clear-colored silicone blend useful in high solids coatings. Its primary function is to improve flow and leveling during application, including elimination of bubbles during application, reducing orange peel and improving the final product's mar resistance. It can be used in virtually all high solids resins. 收起 | |
| SAFA 302 | PCI Group, Inc. | SAFA 302 is a clear-colored blend comprised of polyether modified dimethlylpolysiloxane and silicone glycol co-polymer. Together, these provide defoaming, mar resistance, increased resin compatibility, surface tension reduction and lowering of the coeffic...展开 SAFA 302 is a clear-colored blend comprised of polyether modified dimethlylpolysiloxane and silicone glycol co-polymer. Together, these provide defoaming, mar resistance, increased resin compatibility, surface tension reduction and lowering of the coefficient of friction. It is compatible with most types of solvent and water systems, including emulsions. 收起 | |
| SCABA | PCI Group, Inc. | SCABA is a light amber reactive polyamide resin solution that is intended to increase viscosity and improve sag resistance for pigmented systems. It can be used in acid-catalyzed, alkyds (short, medium and long oils), epoxy, epoxy ester, polyurethane and ...展开 SCABA is a light amber reactive polyamide resin solution that is intended to increase viscosity and improve sag resistance for pigmented systems. It can be used in acid-catalyzed, alkyds (short, medium and long oils), epoxy, epoxy ester, polyurethane and polyester. 收起 | |
| SLICKO 1000 | PCI Group, Inc. | SLICKO 1000 is a clear liquid with a medium viscosity. It is a blend of linear dimethicone polymers and aliphatic solvent, used as an automotive, aircraft and aerospace paint additive. It can be added in small quantities, approximately 0.1% by weight or v...展开 SLICKO 1000 is a clear liquid with a medium viscosity. It is a blend of linear dimethicone polymers and aliphatic solvent, used as an automotive, aircraft and aerospace paint additive. It can be added in small quantities, approximately 0.1% by weight or volume, to eliminate fish-eye and enhance gloss and scratch/mar resistance. It is not reactive and is effective in all solvent based enamels, lacquers and synthetic paints, including catalyzed systems such as urethanes. 收起 | |
| So-Thick 30 | PCI Group, Inc. | So-Thick 30 is a translucent, non-ionic, non-urethane based associative thickener. It is specifically designed for high quality latex paints, high gloss, semi gloss and flat finishes in interior or exterior applications. It provides flow, leveling and thi...展开 So-Thick 30 is a translucent, non-ionic, non-urethane based associative thickener. It is specifically designed for high quality latex paints, high gloss, semi gloss and flat finishes in interior or exterior applications. It provides flow, leveling and thinning enhancements, good color acceptance and sag resistance. It can also be used in adhesives, sealants and inks. 收起 | |
| SSAWB | PCI Group, Inc. | SSAWB is a milky white additive allowing the formulator to create a sanding sealer from existing top coat products. It allows the wood to be sealed and filled completely prior to a finishing top coat. It provides a product which reduces grain raising, san...展开 SSAWB is a milky white additive allowing the formulator to create a sanding sealer from existing top coat products. It allows the wood to be sealed and filled completely prior to a finishing top coat. It provides a product which reduces grain raising, sands easily and is compatible with most water based topcoats. 收起 | |
| STANLUX® Gold 12000 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 12000 is a fine bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment offers opacity, gloss and printability for flexographic and gravure systems. STANLUX® Gold 1...展开 STANLUX® Gold 12000 is a fine bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment offers opacity, gloss and printability for flexographic and gravure systems. STANLUX® Gold 12000 is available in several shades and has an average size of 16 microns. 收起 | |
| STANLUX® Gold 13000 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 13000 is a fine bronze powder constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment offers opacity, gloss and printability for use in flexographic and gravure systems. STANLUX® Gold 13...展开 STANLUX® Gold 13000 is a fine bronze powder constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment offers opacity, gloss and printability for use in flexographic and gravure systems. STANLUX® Gold 13000 is available in several shades and has an average size of 16 microns. 收起 | |
| STANLUX® Gold 13300 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 13300 is a fine bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment offers opacity, gloss and printability for flexographic and gravure systems. STANLUX® Gold 1...展开 STANLUX® Gold 13300 is a fine bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment offers opacity, gloss and printability for flexographic and gravure systems. STANLUX® Gold 13300 is available in several shades and has an average size of 12 microns. 收起 | |
| STANLUX® Gold 14000 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 14000 is super fine bronze powder constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment generates decorative metallic effects and is used in offset printing inks. STANLUX® Gold 14000 i...展开 STANLUX® Gold 14000 is super fine bronze powder constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment generates decorative metallic effects and is used in offset printing inks. STANLUX® Gold 14000 is available in several shades and has an average size of 5 microns. 收起 | |
| STANLUX® Gold 2000 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 2000 is a coarse bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in decorative paints and is recommended for applications where high brilliance is r...展开 STANLUX® Gold 2000 is a coarse bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in decorative paints and is recommended for applications where high brilliance is required. STANLUX® Gold 2000 is available in several shades and has an average size of 50 microns. 收起 | |
| STANLUX® Gold 2100 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 2100 is a coarse bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in decorative paints and is recommended for applications where high brilliance is r...展开 STANLUX® Gold 2100 is a coarse bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in decorative paints and is recommended for applications where high brilliance is required. STANLUX® Gold 2100 is available in several shades and has an average size of 50 microns. 收起 | |
| STANLUX® Gold 2700 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 2700 is a coarse bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in decorative paints and is recommended for applications where high brilliance is r...展开 STANLUX® Gold 2700 is a coarse bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in decorative paints and is recommended for applications where high brilliance is required. STANLUX® Gold 2700 is available in several shades and has an average size of 45 microns. 收起 | |
| STANLUX® Gold 2800 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 2800 is a coarse bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in decorative paints and is recommended for applications where high brilliance is r...展开 STANLUX® Gold 2800 is a coarse bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in decorative paints and is recommended for applications where high brilliance is required. STANLUX® Gold 2800 is available in several shades and has an average size of 45 microns. 收起 | |
| STANLUX® Gold 3500 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 3500 is a coarse bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in decorative paints and is recommended for applications where high brilliance is r...展开 STANLUX® Gold 3500 is a coarse bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in decorative paints and is recommended for applications where high brilliance is required. STANLUX® Gold 3500 is available in several shades and has an average size of 35 microns. 收起 | |
| STANLUX® Gold 3600 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 3600 is a coarse bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in decorative paints and is recommended for applications where high brilliance is r...展开 STANLUX® Gold 3600 is a coarse bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in decorative paints and is recommended for applications where high brilliance is required. STANLUX® Gold 3600 is available in several shades and has an average size of 35 microns. 收起 | |
| STANLUX® Gold 4500 (Shade C) | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 4500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is reco...展开 STANLUX® Gold 4500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is recommended for applications where high brilliance and hiding power are required. STANLUX® Gold 4500 has an average size of 25 microns and a 1.5% water retention rate with 3.4 - 4.2 (cm²/g Min) water coverage property. 收起 | |
| STANLUX® Gold 4500 (Shade D) | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 4500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints, and silk screen inks, and it is rec...展开 STANLUX® Gold 4500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints, and silk screen inks, and it is recommended for applications where high brilliance and hiding power are required. STANLUX® Gold 4500 has an average size of 30 microns and a 8% water retention rate with a 3.4 - 4.2 (cm²/g Min) water coverage property. 收起 | |
| STANLUX® Gold 4500 (Shades P - RP - R) | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 4500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is reco...展开 STANLUX® Gold 4500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is recommended for applications where high brilliance and hiding power are required. STANLUX® Gold 4500 has an average size of 25 microns and a 1.5% water retention rate with 4.3-5.4 (cm²/g Min) water coverage property. 收起 | |
| STANLUX® Gold 4600 (Shade C) | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 4600 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is reco...展开 STANLUX® Gold 4600 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is recommended for applications where high brilliance and hiding power are required. STANLUX® Gold 4600 has an average size of 30 microns and a 1.5% water retention rate with a 3.4 - 4.2 (cm²/g Min) water coverage property. 收起 | |
| STANLUX® Gold 4600 (Shades P - RP - R) | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 4600 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is reco...展开 STANLUX® Gold 4600 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is recommended for applications where high brilliance and hiding power are required. STANLUX® Gold 4600 has an average size of 30 microns and a 1.5% water retention rate with a 4.3 - 5.4 (cm²/g Min) water coverage property. 收起 | |
| STANLUX® Gold 5500 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 5500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is reco...展开 STANLUX® Gold 5500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is recommended for applications where regular surface finish and hiding power are required. STANLUX® Gold 5500 is available in several shades and has an average size of 23 microns. It possesses a 0.5% water retention rate with a 4.2 - 6.0 (cm²/g Min) water coverage property. 收起 | |
| STANLUX® Gold 6500 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 6500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is reco...展开 STANLUX® Gold 6500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is recommended for applications where regular surface finish and hiding power are required. STANLUX® Gold 6500 is available in several shades and has an average size of 20 microns. It possesses a 5% water retention rate with a 5.5 - 6.5 (cm²/g Min) water coverage property. 收起 | |
| STANLUX® Gold 7500 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 7500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is reco...展开 STANLUX® Gold 7500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is recommended for applications where regular surface finish and hiding power are required. STANLUX® Gold 7500 is available in several shades and has an average size of 18 microns. It possesses a 0.8% water retention rate with a 6.3 - 7.5 (cm²/g Min) water coverage property. 收起 | |
| STANLUX® Hydro 140 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Hydro 140 is a stabilized aluminium leafing paste with medium-coarse lamellar particles, recommended for use in waterborne paints. This product has a maximum retention of 1% in # 325 mesh. | |
| STANLUX® Hydro 150 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Hydro 150 is a stabilized aluminium leafing paste with medium-coarse lamellar particles, recommended for use in waterborne paints. This product has a maximum retention of 4% in # 325 mesh. | |
| STANLUX® Paste 100 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 100 is a leafing type aluminum paste made of lamellar particles covered with stearic acid. This product creates a unique shiny aesthetic effect that provides the applied system with a protective barrier, coverage, corrosion resistance, and ...展开 STANLUX® Paste 100 is a leafing type aluminum paste made of lamellar particles covered with stearic acid. This product creates a unique shiny aesthetic effect that provides the applied system with a protective barrier, coverage, corrosion resistance, and thermal reflection. STANLUX® Paste 100 is specially recommended for formulation systems with low tolerance to aliphatic solvent and is commonly used for maintenance and general industrial paints. 收起 | |
| STANLUX® Paste 100N | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 100N is a non-leafing type aluminum paste made of lamellar particles covered with stearic acid. This product creates a unique shiny aesthetic effect that provides the applied system with a protective barrier, coverage, corrosion resistance,...展开 STANLUX® Paste 100N is a non-leafing type aluminum paste made of lamellar particles covered with stearic acid. This product creates a unique shiny aesthetic effect that provides the applied system with a protective barrier, coverage, corrosion resistance, and thermal reflection. STANLUX® Paste 100N is specially recommended for formulation systems with low tolerance to aliphatic solvent and is commonly used for maintenance, protective, or marine coatings. 收起 | |
| STANLUX® Paste 1100 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 1100 is a non-leafing type aluminum paste made of lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1100 is specially recommended for formulation...展开 STANLUX® Paste 1100 is a non-leafing type aluminum paste made of lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1100 is specially recommended for formulation systems with low tolerance to aliphatic solvent and is commonly used for maintenance, protective and marine coatings, and roof coatings. It has an average particle size of 18 microns and uses a combined solvent of MS (Mineral Spirit) and HA (High Aromatic.) 收起 | |
| STANLUX® Paste 1100N | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 1100N is a non-leafing type aluminum paste made of lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1100N is specially recommended for formulatio...展开 STANLUX® Paste 1100N is a non-leafing type aluminum paste made of lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1100N is specially recommended for formulation systems with low tolerance to aliphatic solvent and is commonly used for maintenance, protective and marine coatings, and roof coatings. It has an average particle size of 18 microns and uses High Aromatic solvent. 收起 | |
| STANLUX® Paste 1120 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 1120 is a non-leafing type aluminum paste made of lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1120 is specially recommended for formulation ...展开 STANLUX® Paste 1120 is a non-leafing type aluminum paste made of lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1120 is specially recommended for formulation systems with low tolerance to aliphatic solvent and is commonly used for maintenance, protective and marine coatings, and roof coatings. It has an average particle size of 17 microns and uses a combined solvent of MS (Mineral Spirit) and HA (High Aromatic.) 收起 | |
| STANLUX® Paste 1130 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 1130 is a non-leafing type aluminum paste made of fine lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1130 is specially recommended for use in ...展开 STANLUX® Paste 1130 is a non-leafing type aluminum paste made of fine lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1130 is specially recommended for use in decorative paints, industrial paints, maintenance, protective and marine coatings, and trade paints. It has an average particle size of 11 microns and uses a combined solvent of MS (Mineral Spirit) and HA (High Aromatic.) 收起 | |
| STANLUX® Paste 120 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 120 is a leafing type aluminum paste made of lamellar particles covered with stearic acid. This product has a high leafing value that adds a durable and protective property to paints. STANLUX® Paste 120 commonly used for general industrial...展开 STANLUX® Paste 120 is a leafing type aluminum paste made of lamellar particles covered with stearic acid. This product has a high leafing value that adds a durable and protective property to paints. STANLUX® Paste 120 commonly used for general industrial paints, decorative and/or architectural paints, and maintenance paints. It has an average particle size of 17 microns and a minimum water coverage of 20,000 cm2/g. 收起 | |
| STANLUX® Paste 1200 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 1200 is a non-leafing type aluminum paste made of lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1200 has a high degree of hiding power and is ...展开 STANLUX® Paste 1200 is a non-leafing type aluminum paste made of lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1200 has a high degree of hiding power and is recommended for use in internal can coatings. It has an average particle size of 14 microns and uses a combined solvent of MS (Mineral Spirit) and HA (High Aromatic.) 收起 | |
| STANLUX® Paste 1290 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 1290 is a non-leafing type aluminum paste made of fine lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1290 has a high degree of hiding power an...展开 STANLUX® Paste 1290 is a non-leafing type aluminum paste made of fine lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1290 has a high degree of hiding power and is recommended for use in internal can coatings. It has an average particle size of 8 microns and uses a combined solvent of MS (Mineral Spirit) and HA (High Aromatic.) 收起 | |
| STANLUX® Paste 130 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 130 is a leafing type aluminum paste made of lamellar particles covered with stearic acid. This product has a high leafing value that adds a durable and protective property to paints. STANLUX® Paste 130 commonly used for general industrial ...展开 STANLUX® Paste 130 is a leafing type aluminum paste made of lamellar particles covered with stearic acid. This product has a high leafing value that adds a durable and protective property to paints. STANLUX® Paste 130 commonly used for general industrial paints, decorative and/or architectural paints, and maintenance paints. It has an average particle size of 19 microns and a minimum water coverage of 21,000 cm2/g. 收起 | |
| STANLUX® Paste 130N | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 130N is a leafing type aluminum paste made of lamellar particles covered with stearic acid. This product has a high leafing value that adds a durable and protective property to paints. STANLUX® Paste 130N is specially recommended for applic...展开 STANLUX® Paste 130N is a leafing type aluminum paste made of lamellar particles covered with stearic acid. This product has a high leafing value that adds a durable and protective property to paints. STANLUX® Paste 130N is specially recommended for application in formulations based on resins that are incompatible with aliphatic solvents and is commonly used for general industrial paints, decorative and/or architectural paints, and maintenance paints. It has an average particle size of 19 microns and a minimum water coverage of 21,000 cm2/g. 收起 | |
| STANLUX® Paste 140 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 140 is a leafing type aluminum paste made of lamellar particles covered with stearic acid. This product has a high leafing value that adds a durable and protective property to paints. STANLUX® Paste 140 is recommended for application in for...展开 STANLUX® Paste 140 is a leafing type aluminum paste made of lamellar particles covered with stearic acid. This product has a high leafing value that adds a durable and protective property to paints. STANLUX® Paste 140 is recommended for application in formulations that require aluminium pigment with high metallic effect and is commonly used for general industrial paints, decorative and/or architectural paints, and maintenance paints. It has an average particle size of 19 microns and a minimum water coverage of 21,000 cm2/g. 收起 | |
| STANLUX® Paste 150 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 150 is a leafing type aluminum paste made of medium-coarse lamellar particles covered with stearic acid. STANLUX® Paste 150 is recommended for application in formulations that require aluminium pigment with high metallic effect and is commo...展开 STANLUX® Paste 150 is a leafing type aluminum paste made of medium-coarse lamellar particles covered with stearic acid. STANLUX® Paste 150 is recommended for application in formulations that require aluminium pigment with high metallic effect and is commonly used for industrial paints, and roof coatings. It has an average particle size of 19 microns and a minimum water coverage of 14,000 cm2/g. 收起 | |
| STANLUX® Paste 1600 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 1600 is a non-leafing type aluminum paste made of lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1600 is considered to be standard level and is...展开 STANLUX® Paste 1600 is a non-leafing type aluminum paste made of lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1600 is considered to be standard level and is recommended for paint formulations that require aluminium pigment with high metallic effect including: aerosol spray decorative paints, industrial paints, maintenance paints, protective and marine coatings, and trade paints. It has an average particle size of 23 microns and uses a combined solvent of MS (Mineral Spirit) and HA (High Aromatic.) 收起 | |
| STANLUX® Paste 1600N | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 1600N is a non-leafing type aluminum paste made of lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1600N is considered to be standard level and ...展开 STANLUX® Paste 1600N is a non-leafing type aluminum paste made of lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1600N is considered to be standard level and is recommended for formulation systems with low tolerance to aliphatic solvent. It has an average particle size of 23 microns and uses a HA (High Aromatic) solvent. Applications include: aerosol spray decorative paints, industrial paints, maintenance paints, protective and marine coatings, and trade paints. 收起 | |
| STANLUX® Paste 166 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 166 is a leafing type aluminum paste made of medium size lamellar particles covered with stearic acid. STANLUX® Paste 166 is recommended for application in high grade and brilliant protective paints and is commonly used for decorative paint...展开 STANLUX® Paste 166 is a leafing type aluminum paste made of medium size lamellar particles covered with stearic acid. STANLUX® Paste 166 is recommended for application in high grade and brilliant protective paints and is commonly used for decorative paints, industrial paints, and trade paints. It has an average particle size of 15 microns and a minimum water coverage of 22,000cm2/g. 收起 | |
| STANLUX® Paste 1700 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 1700 is a non-leafing type aluminum paste made of lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1700 is considered to be standard level and is...展开 STANLUX® Paste 1700 is a non-leafing type aluminum paste made of lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1700 is considered to be standard level and is recommended for formulation systems with low tolerance to aliphatic solvent. It has an average particle size of 21 microns and uses a HA (High Aromatic) and MS (Mineral Spirit) solvent. Applications include: aerosol spray decorative paints, industrial paints, maintenance paints, protective and marine coatings, and trade paints. 收起 | |
| STANLUX® Paste 1770 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 1770 is a non-leafing type aluminum paste made of medium lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1770 is considered to be standard level...展开 STANLUX® Paste 1770 is a non-leafing type aluminum paste made of medium lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1770 is considered to be standard level and is recommended for formulation systems with low tolerance to aliphatic solvent. It has an average particle size of 16 microns and uses a HA (High Aromatic) and MS (Mineral Spirit) solvent. Applications include: aerosol spray decorative paints, industrial paints, maintenance paints, protective and marine coatings, and trade paints. 收起 | |
| STANLUX® Paste 1770/60 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 1770/60 is a non-leafing type aluminum paste made of medium lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1770/60 is considered to be standard...展开 STANLUX® Paste 1770/60 is a non-leafing type aluminum paste made of medium lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1770/60 is considered to be standard level and is recommended for formulation systems with low tolerance to aliphatic solvent. It has an average particle size of 16 microns and uses a HA (High Aromatic) and MS (Mineral Spirit) solvent. STANLUX® Paste 1770/60 has the same characteristics of Stanlux Paste 1770 with 60% of solids. Applications include: aerosol spray decorative paints, industrial paints, maintenance paints, protective and marine coatings, and trade paints. 收起 | |
| STANLUX® Paste 1870 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 1870 is a non-leafing type aluminum paste made of medium lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1870 is considered to be standard level...展开 STANLUX® Paste 1870 is a non-leafing type aluminum paste made of medium lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1870 is considered to be standard level and is recommended for systems requiring differentiated metallic finishes, brighter color, and high hiding power. It has an average particle size of 16 microns and uses a HA (High Aromatic) and MS (Mineral Spirit) solvent. Applications include: aerosol spray decorative paints, industrial paints, and trade paints. 收起 | |
| STANLUX® Paste 1900 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 1900 is a non-leafing type aluminum paste made of coarse lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1900 is considered to be standard level...展开 STANLUX® Paste 1900 is a non-leafing type aluminum paste made of coarse lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1900 is considered to be standard level and is recommended for systems requiring protective properties. It has an average particle size of 32 microns and uses a HA (High Aromatic) and MS (Mineral Spirit) solvent. Applications include: industrial paints, maintenance, protective and marine coatings. 收起 | |
| STANLUX® Paste 200 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 200 is a leafing type aluminum paste made of lamellar particles covered with stearic acid. STANLUX® Paste 200 is recommended for application in high grade and brilliant protective paints and is commonly used for decorative paints, trade pai...展开 STANLUX® Paste 200 is a leafing type aluminum paste made of lamellar particles covered with stearic acid. STANLUX® Paste 200 is recommended for application in high grade and brilliant protective paints and is commonly used for decorative paints, trade paints, and printing inks. It has an average particle size of 14 microns and a minimum water coverage of 20,000 cm2/g. 收起 | |
| STANLUX® Paste 2000 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 2000 is a non-leafing type aluminum paste made of medium lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 2000 is considered to be standard level...展开 STANLUX® Paste 2000 is a non-leafing type aluminum paste made of medium lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 2000 is considered to be standard level and is recommended for systems requiring differentiated metallic effects, and brighter metallic pigment. It has an average particle size of 21 microns and uses a HA (High Aromatic) and MS (Mineral Spirit) solvent. Applications include: decorative paints, industrial paints, and trade paints. 收起 | |
| STANLUX® Paste 200N | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 200N is a leafing type aluminum paste made of lamellar particles covered with stearic acid. STANLUX® Paste 200N is recommended for application in products requiring high covering power and is commonly used for decorative paints, trade paint...展开 STANLUX® Paste 200N is a leafing type aluminum paste made of lamellar particles covered with stearic acid. STANLUX® Paste 200N is recommended for application in products requiring high covering power and is commonly used for decorative paints, trade paints, and printing inks. It has an average particle size of 14 microns and a minimum water coverage of 20,000 cm2/g. 收起 | |
| STANLUX® Paste 260 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 260 is a leafing type aluminum paste made of fine lamellar particles covered with stearic acid. STANLUX® Paste 260 is specially recommended for printing inks and is commonly used for aerosol spray decorative paints, flexographic printing in...展开 STANLUX® Paste 260 is a leafing type aluminum paste made of fine lamellar particles covered with stearic acid. STANLUX® Paste 260 is specially recommended for printing inks and is commonly used for aerosol spray decorative paints, flexographic printing inks, and gravure printing inks. It has an average particle size of 14 microns and a minimum water coverage of 28,000 cm2/g. 收起 | |
| STANLUX® Paste 266 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 266 is a leafing type aluminum paste made of fine lamellar particles covered with stearic acid. STANLUX® Paste 266 is specially recommended for high grade and brilliant printing inks and is commonly used for aerosol spray decorative paints,...展开 STANLUX® Paste 266 is a leafing type aluminum paste made of fine lamellar particles covered with stearic acid. STANLUX® Paste 266 is specially recommended for high grade and brilliant printing inks and is commonly used for aerosol spray decorative paints, flexographic and gravure printing inks that require aluminium pigment with a high metallic effect. It has an average particle size of 14 microns and a minimum water coverage of 28,000 cm2/g. 收起 | |
| STANLUX® Paste 270/70 IPA | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 270/70 IPA is a leafing type aluminum paste made of fine lamellar particles covered with stearic acid and is suitable with solvent for high grade printing inksthat require low odour property. STANLUX® Paste 270/70 IPA is specially recomme...展开 STANLUX® Paste 270/70 IPA is a leafing type aluminum paste made of fine lamellar particles covered with stearic acid and is suitable with solvent for high grade printing inksthat require low odour property. STANLUX® Paste 270/70 IPA is specially recommended for printing inks and is commonly used for flexography and gravure free of residual solvent odour. It has an average particle size of 11 microns and a minimum water coverage of 30,000 cm2/g. 收起 | |
| STANLUX® Paste 280 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 280 is a leafing type aluminum paste made of fine lamellar particles covered with stearic acid. STANLUX® Paste 280 is specially recommended for high grade printing inks and is commonly used for aerosol spray decorative paints, flexographic ...展开 STANLUX® Paste 280 is a leafing type aluminum paste made of fine lamellar particles covered with stearic acid. STANLUX® Paste 280 is specially recommended for high grade printing inks and is commonly used for aerosol spray decorative paints, flexographic and gravure printing inks that require aluminium pigment with a high metallic effect. It has an average particle size of 12 microns and a minimum water coverage of 34,000 cm2/g. 收起 |
