| #14 Sta-Brite | PCI Group, Inc. | #14 Sta-Brite is a clear, octadecanoic acid product, designed to enhance leafing aluminum in enamel and related systems. Improves the uniformity and brightness, leafing and leaf retention of all systems commonly used as leafing aluminum coatings. | |
| #249 HI-TECH | PCI Group, Inc. | #249 HI-TECH is a clear blend of Alkyl-Aryl modified silicones. It is designed for high solids coating systems to improve mar resistance without the standard recoat problems. Designed for use in virtually all high solids solvent-borne systems. | |
| 901-GDA-2 | PCI Group, Inc. | 901-GDA-2 is a clear, silicone-free polyvinyl isobutyl ether solution used to improve color development, leveling and gloss while controlling surface flooding and floating. It can be used with acrylic resin, alkyd (long, medium and short oils), polyamide,...展开 901-GDA-2 is a clear, silicone-free polyvinyl isobutyl ether solution used to improve color development, leveling and gloss while controlling surface flooding and floating. It can be used with acrylic resin, alkyd (long, medium and short oils), polyamide, polyester and urethane for pigmented and non-pigmented systems. 收起 | |
| 941 LBA | PCI Group, Inc. | 941 LBA is a clear, linear polydimethylsiloxane polymer designed for use in systems containing non-leafing aluminums. It provides higher brightness, controlled uniformity and burnishing and helps prevent “black” float. | |
| AMA | PCI Group, Inc. | AMA is a clear-colored dimethyl silicone which improves mar resistance and reduces surface tension in conventional solvent based coatings. Systems include: acrylic resins, alkyd, epoxy, lacquer, phenolic, polyester and urethane. It is recommended for clea...展开 AMA is a clear-colored dimethyl silicone which improves mar resistance and reduces surface tension in conventional solvent based coatings. Systems include: acrylic resins, alkyd, epoxy, lacquer, phenolic, polyester and urethane. It is recommended for clear topcoats. 收起 | |
| AMAFCA | PCI Group, Inc. | AMAFCA is a clear-colored Alkyl-Aryl silicone designed control foaming during application. It also promotes improved mar resistance for virtually all solvent based coating systems. It can control foaming in roller coater, flow coater, curtain coater, dip,...展开 AMAFCA is a clear-colored Alkyl-Aryl silicone designed control foaming during application. It also promotes improved mar resistance for virtually all solvent based coating systems. It can control foaming in roller coater, flow coater, curtain coater, dip, conventional and airless spray systems. 收起 | |
| AMMA | PCI Group, Inc. | AMMA is a non-ionic, clear-colored polyalkyeneoxide-modified polydimethylsiloxane developed for high solids / high solids metallic coatings. It helps prevent mottling, enhances color uniformity and increases the sharpness of gloss. Systems include: acryl...展开 AMMA is a non-ionic, clear-colored polyalkyeneoxide-modified polydimethylsiloxane developed for high solids / high solids metallic coatings. It helps prevent mottling, enhances color uniformity and increases the sharpness of gloss. Systems include: acrylic resins, alkyds, epoxy, melamine, phenolic, polyamide, polyester, urea and urethane. 收起 | |
| Anhydrite | Provencale S.A. | Anhydrite is a filler that can withstand humidity. It is finely ground and dressed natural anhydrite that is a waterless sulphate. It is often formed as an evaporation product from sea water subject to progressive concentration of the salt water solution....展开 Anhydrite is a filler that can withstand humidity. It is finely ground and dressed natural anhydrite that is a waterless sulphate. It is often formed as an evaporation product from sea water subject to progressive concentration of the salt water solution. Anhydrite makes up the sturdy solid base of gypsum deposits and can be mined separately. It is for use in industrial paints, lacquers and adhesives. 收起 | |
| APACA | PCI Group, Inc. | APACA is a clear, non-ionic modified dimethyl polysiloxane co-polymer solution for use in water-borne and water-reducible products. It will assist in the reduction of surface defects by altering the surface tension of the coating. It will also increase gl...展开 APACA is a clear, non-ionic modified dimethyl polysiloxane co-polymer solution for use in water-borne and water-reducible products. It will assist in the reduction of surface defects by altering the surface tension of the coating. It will also increase gloss, slip and mar resistance. 收起 | |
| ASAFA | PCI Group, Inc. | ASAFA is a pale amber colored blend of a dimethyl silicone and refined naphthenic base oil. Designed for use in conventional systems such as acrylic resins, alkyds, polyamide, polyester and urethane. It acts to control silking, flooding and pigment float ...展开 ASAFA is a pale amber colored blend of a dimethyl silicone and refined naphthenic base oil. Designed for use in conventional systems such as acrylic resins, alkyds, polyamide, polyester and urethane. It acts to control silking, flooding and pigment float while sharpening gloss, improving pigment wetting and enhancing leveling. 收起 | |
| ASAFA #3 | PCI Group, Inc. | ASAFA #3 is a clear-colored linear polydimethylsiloxane polymer used where floating or silking is a problem. It effectively balances out solvents during the air dry process. It can be used in coating systems such as alkyds, modified alkyds, acrylics, epox...展开 ASAFA #3 is a clear-colored linear polydimethylsiloxane polymer used where floating or silking is a problem. It effectively balances out solvents during the air dry process. It can be used in coating systems such as alkyds, modified alkyds, acrylics, epoxies, vinyls and most oleo-resinous non-aqueous systems. 收起 | |
| ASAFAMA | PCI Group, Inc. | ASAFAMA is a clear-colored, highly-modified silicone fluid designed for use in systems where a dimethyl silicone may be a problem. It is useful for enhancing the defoaming properties of applied coatings, and sharpens gloss, improves color acceptance and i...展开 ASAFAMA is a clear-colored, highly-modified silicone fluid designed for use in systems where a dimethyl silicone may be a problem. It is useful for enhancing the defoaming properties of applied coatings, and sharpens gloss, improves color acceptance and improves mar resistance without recoating problems. 收起 | |
| ASASWA | PCI Group, Inc. | ASASWA is a light amber, highly modified reactive polyamide resin solution. It can be used in acid-catalyzed, alkyds (short, medium and long oils), epoxy, epoxy ester, polyurethane and high solids polyester systems. It increases resistance to sag, allows ...展开 ASASWA is a light amber, highly modified reactive polyamide resin solution. It can be used in acid-catalyzed, alkyds (short, medium and long oils), epoxy, epoxy ester, polyurethane and high solids polyester systems. It increases resistance to sag, allows for enhanced pigment wetting and color development and eliminates hard settling. 收起 | |
| ASLA | PCI Group, Inc. | ASLA is a clear, silicone-free, polyvinyl ethyl ether solution used to improve color development, leveling and gloss while controllling surface flooding and floating. It can be used in acrylic resins, alkyds (long, med., short oils), polyamide, polyester ...展开 ASLA is a clear, silicone-free, polyvinyl ethyl ether solution used to improve color development, leveling and gloss while controllling surface flooding and floating. It can be used in acrylic resins, alkyds (long, med., short oils), polyamide, polyester and urethane pigmented and non-pigmented systems. 收起 | |
| C-485-FBRA | PCI Group, Inc. | C-485-FBRA is a clear alkyl-aryl air release agent which acts as a foam and bubble release agent. It is compatible with conventional systems: acrylic resins, alkyds, lacquers, melamine, phenolic, polyamide, polyester and urethane. It also acts to improve ...展开 C-485-FBRA is a clear alkyl-aryl air release agent which acts as a foam and bubble release agent. It is compatible with conventional systems: acrylic resins, alkyds, lacquers, melamine, phenolic, polyamide, polyester and urethane. It also acts to improve leveling and slip. 收起 | |
| CALGAR® 0.35-0.7 | Provencale S.A. | CALGAR® 0.35-0.7, in the form of a white powder, is a calcium carbonate that can be used as a filler in paints and coatings. This product's mean particle size is 500 microns. Its pH in a water solution lies between 8.5 and 9.5, and its specific gravity ...展开 CALGAR® 0.35-0.7, in the form of a white powder, is a calcium carbonate that can be used as a filler in paints and coatings. This product's mean particle size is 500 microns. Its pH in a water solution lies between 8.5 and 9.5, and its specific gravity is 2.7. 收起 | |
| CALGAR® 0.5-1.5 | Provencale S.A. | CALGAR® 0.5-1.5, in the form of a white powder, is a calcium carbonate that can be used as a filler in paints and coatings. This product's untamped apparent density is 1.3. Its pH in a water solution lies between 8.5 and 9.5, and its specific gravity is...展开 CALGAR® 0.5-1.5, in the form of a white powder, is a calcium carbonate that can be used as a filler in paints and coatings. This product's untamped apparent density is 1.3. Its pH in a water solution lies between 8.5 and 9.5, and its specific gravity is 2.7. 收起 | |
| CALGAR® 130 | Provencale S.A. | CALGAR® 130, in the form of a white powder, is a calcium carbonate that can be used as a filler in paints and coatings. This product's mean particle size is 140 microns. Its pH in a water solution lies between 8.5 and 9.5, and its specific gravity is 2....展开 CALGAR® 130, in the form of a white powder, is a calcium carbonate that can be used as a filler in paints and coatings. This product's mean particle size is 140 microns. Its pH in a water solution lies between 8.5 and 9.5, and its specific gravity is 2.7. 收起 | |
| CALGAR® 1.5-3 | Provencale S.A. | CALGAR® 1.5-3, in the form of a white powder, is a calcium carbonate that can be used as a filler in paints and coatings. This product's untamped apparent density is 1.3. Its pH in a water solution lies between 8.5 and 9.5, and its specific gravity is 2...展开 CALGAR® 1.5-3, in the form of a white powder, is a calcium carbonate that can be used as a filler in paints and coatings. This product's untamped apparent density is 1.3. Its pH in a water solution lies between 8.5 and 9.5, and its specific gravity is 2.7. 收起 | |
| CALGAR® 40 | Provencale S.A. | CALGAR® 40, in the form of a white powder, is a calcium carbonate that can be used as a filler in paints and coatings. This product's mean particle size is 12 microns. Its pH in a water solution lies between 8.5 and 9.5, and its specific gravity is 2.7. | |
| CALGAR® 80-800 | Provencale S.A. | CALGAR® 80-800, in the form of a white powder, is a calcium carbonate that can be used as a filler in paints and coatings. This product's untamped apparent density is 1.4. Its pH in a water solution lies between 8.5 and 9.5, and its specific gravity is ...展开 CALGAR® 80-800, in the form of a white powder, is a calcium carbonate that can be used as a filler in paints and coatings. This product's untamped apparent density is 1.4. Its pH in a water solution lies between 8.5 and 9.5, and its specific gravity is 2.7. 收起 | |
| CHEM-REZ A-1050 | PCI Group, Inc. | CHEM-REZ A-1050 is a clear poly vinyl ethyl isoburyl ether solution recommended for use in most conventional and high solid coating systems. It increases adhesion and flexibility, improves flow and leveling, acts as a plasticizer for coatings and inks and...展开 CHEM-REZ A-1050 is a clear poly vinyl ethyl isoburyl ether solution recommended for use in most conventional and high solid coating systems. It increases adhesion and flexibility, improves flow and leveling, acts as a plasticizer for coatings and inks and is useful in dip and flow coater systems. 收起 | |
| CLAWB | PCI Group, Inc. | CLAWB is a clear, colorless liquid comprised of and epoxy functional silane which serves as a crosslinker and adhesion promoter. It is intended for formulations containing acrylic latexes and polyurethane dispersions with carboxy or amino functionality. W...展开 CLAWB is a clear, colorless liquid comprised of and epoxy functional silane which serves as a crosslinker and adhesion promoter. It is intended for formulations containing acrylic latexes and polyurethane dispersions with carboxy or amino functionality. Waterborne coating formulations using CLAWB show improved solvent, impact and mar resistance, superior wet and dry adhesion, gloss retention upon aging and improved stain resistance in wood coatings. 收起 | |
| Corindon Synthétique | Provencale S.A. | Corindon Synthétique, in the form of a grey powder, is an industrial raw material. This product is composed of about 99% aluminum oxide. It can be used in abrasion-resistant wood or decorative coatings. Its surface is often treated with silanes or sila...展开 Corindon Synthétique, in the form of a grey powder, is an industrial raw material. This product is composed of about 99% aluminum oxide. It can be used in abrasion-resistant wood or decorative coatings. Its surface is often treated with silanes or silane-based substances. 收起 | |
| Criscal 0.5-1 | Provencale S.A. | Criscal 0.5-1, in the form of a white powder, is a calcium carbonate that can be used as a filler in paints and coatings. Its untamped apparent density is 1.3. Its specific gravity is 2.7 and its refractive index is 1.59. | |
| Criscal 1 | Provencale S.A. | Criscal 1, in the form of a white powder, is a calcium carbonate that can be used as a filler in paints and coatings. Its mean particle size is 1.6 microns. Its specific gravity is 2.7 and its refractive index is 1.59. | |
| Criscal 10 | Provencale S.A. | Criscal 10, in the form of a white powder, is a calcium carbonate that can be used as a filler in paints and coatings. Its mean particle size is 10 microns. Its specific gravity is 2.7 and its refractive index is 1.59. | |
| Criscal 1.5-2.5 | Provencale S.A. | Criscal 1.5-2.5, in the form of a white powder, is a calcium carbonate that can be used as a filler in paints and coatings. Its untamped apparent density is 1.3. Its specific gravity is 2.7 and its refractive index is 1.59. | |
| Criscal 2 | Provencale S.A. | Criscal 2, in the form of a white powder, is a calcium carbonate that can be used as a filler in paints and coatings. Its mean particle size is 3 microns. Its specific gravity is 2.7 and its refractive index is 1.59. | |
| Criscal 2-4 | Provencale S.A. | Criscal 2-4, in the form of a white powder, is a calcium carbonate that can be used as a filler in paints and coatings. Its untamped apparent density is 1.3. Its specific gravity is 2.7 and its refractive index is 1.59. | |
| Criscal 5 | Provencale S.A. | Criscal 5, in the form of a white powder, is a calcium carbonate that can be used as a filler in paints and coatings. Its mean particle size is 5 microns. Its specific gravity is 2.7 and its refractive index is 1.59. | |
| Criscal 80-800 | Provencale S.A. | Criscal 80-800, in the form of a white powder, is a calcium carbonate that can be used as a filler in paints and coatings. Its untamped apparent density is 1.3. Its specific gravity is 2.7 and its refractive index is 1.59. | |
| CSV-3000 | PCI Group, Inc. | CSV-3000 is a thixotropic, milky white oil emulsion intended for blending with high Tg acrylic and polyurethane emulsions. The end product will provide semi-transparent concrete stains. It is intended to penetrate and seal the surface, minimizing water tr...展开 CSV-3000 is a thixotropic, milky white oil emulsion intended for blending with high Tg acrylic and polyurethane emulsions. The end product will provide semi-transparent concrete stains. It is intended to penetrate and seal the surface, minimizing water transmission. The basic film properties are determined by the added emulsion. 收起 | |
| ExBar™ 200 | Excalibar Minerals LLC | ExBar™ 200 is a raw mineral material that is manufactured from natural barium sulfate ore. This product is used in many different applications such as paints, adhesives and sealants. It has a median particle size of 15.0u and an oil absorption of 9. | |
| ExBar™ 325 | Excalibar Minerals LLC | ExBar™ 325 is a raw mineral material that is manufactured from natural barium sulfate ore. This product is used in many different applications such as paints, adhesives and sealants. It has a median particle size of 10.0u and an oil absorption of 10. | |
| ExBar™ 400 | Excalibar Minerals LLC | ExBar™ 400 is a raw mineral material that is manufactured from natural barium sulfate ore. This product is used in many different applications such as paints, adhesives and sealants. It has a median particle size of 8.0u and an oil absorption of 12. | |
| ExBar™ W 1 | Excalibar Minerals LLC | ExBar™ W 1 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 1 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 1u and an oil absorption of 15. 收起 | |
| ExBar™ W 2 | Excalibar Minerals LLC | ExBar™ W 2 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 2 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 2u and an oil absorption of 13. 收起 | |
| ExBar™ W 3 | Excalibar Minerals LLC | ExBar™ W 3 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 3 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 3u and an oil absorption of 13. 收起 | |
| ExBar™ W 325 | Excalibar Minerals LLC | ExBar™ W 325 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are pr...展开 ExBar™ W 325 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. 收起 | |
| ExBar™ W 4 | Excalibar Minerals LLC | ExBar™ W 4 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 4 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 4u and an oil absorption of 12. 收起 | |
| ExBar™ W 400 | Excalibar Minerals LLC | ExBar™ W 400 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are pr...展开 ExBar™ W 400 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 8u and an oil absorption of 10. 收起 | |
| ExCal® 100 | Excalibar Minerals LLC | ExCal® 100 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications. | |
| ExCal® 200 | Excalibar Minerals LLC | ExCal® 200 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications. | |
| ExCal® 325 | Excalibar Minerals LLC | ExCal® 325 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications. | |
| ExCal® 400 | Excalibar Minerals LLC | ExCal® 400 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications. | |
| ExCal® CW 100 | Excalibar Minerals LLC | ExCal® CW 100 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand ar...展开 ExCal® CW 100 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand are a standard. 收起 | |
| ExCal® CW 200 | Excalibar Minerals LLC | ExCal® CW 200 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand ar...展开 ExCal® CW 200 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand are a standard. 收起 | |
| ExCal® CW 325 | Excalibar Minerals LLC | ExCal® CW 325 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand ar...展开 ExCal® CW 325 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand are a standard. 收起 | |
| FCABA 2 | PCI Group, Inc. | FCABA 2 is a slightly cloudy blend of silicone and organic acid esters. It can be used in most non-aqueous based coating systems, adhesives and inks. It will prevent bubble and foaming in flow coat, curtain coater, dip, roller coater, conventional and air...展开 FCABA 2 is a slightly cloudy blend of silicone and organic acid esters. It can be used in most non-aqueous based coating systems, adhesives and inks. It will prevent bubble and foaming in flow coat, curtain coater, dip, roller coater, conventional and airless spray applications. It is stable over a wide temperature range. 收起 | |
| Feldspar | Provencale S.A. | Feldspar, in the form of a crystalline solid, is a chemically resistant silicate with a thick-slated grain morphology. This product can be used in clear lacquer systems, UV-hardening lacquers, dispersion paints, silicate paints and plasters, and in plast...展开 Feldspar, in the form of a crystalline solid, is a chemically resistant silicate with a thick-slated grain morphology. This product can be used in clear lacquer systems, UV-hardening lacquers, dispersion paints, silicate paints and plasters, and in plastic films. It is mostly a potash feldspar that has been processed and separated by a screening technique that includes classification and micro-grinding. 收起 | |
| FSDS | PCI Group, Inc. | FSDS is a clear liquid comprised of a blend of fluorosurfactant diols. It is intended to provide improved flow, leveling and reduced surface waviness and orange peel without associated air entrainment problems. It reduces the need for multiple additives b...展开 FSDS is a clear liquid comprised of a blend of fluorosurfactant diols. It is intended to provide improved flow, leveling and reduced surface waviness and orange peel without associated air entrainment problems. It reduces the need for multiple additives by acting as a de-aerator and flow / leveling agent. It is well suited for clear formulations and readily miscible with alkyds, polyesters, cellulosics, acrylics and high solids coating systems. 收起 | |
| HSADA-42 | PCI Group, Inc. | HSADA-42 is a clear fluoroaliphatic polymeric ester used in solvent, high solids and UV curable coating systems. It is non-ionic and works to reduce or eliminate problems associated with surface tension such as craters, fisheyes, picture framing and orang...展开 HSADA-42 is a clear fluoroaliphatic polymeric ester used in solvent, high solids and UV curable coating systems. It is non-ionic and works to reduce or eliminate problems associated with surface tension such as craters, fisheyes, picture framing and orange peel. HSADA-42 is active throughout the curing process and demonstrates significantly less foam development than many other fluorosurfactants. 收起 | |
| HSADA-44 | PCI Group, Inc. | HSADA-44 is a clear, fluoroaliphatic polymeric ester used in solvent, high solids and aqueous coating systems. It is non-ionic and works to reduce or eliminate problems associated with surface tension such as craters, fish-eyes, picture framing and orange...展开 HSADA-44 is a clear, fluoroaliphatic polymeric ester used in solvent, high solids and aqueous coating systems. It is non-ionic and works to reduce or eliminate problems associated with surface tension such as craters, fish-eyes, picture framing and orange peel. HSADA-44 is active throughout the curing process and demonstrates significantly less foam development than other fluorosurfactants. 收起 | |
| HSWADA | PCI Group, Inc. | HSWADA is an amber-colored blend of a pale tall oil fatty acid with moderate rosin acid content and an anionic wetting and dispersing agent. It improves substrate wetting, enhances viscosity stability and prevents hard settling while increasing the pigmen...展开 HSWADA is an amber-colored blend of a pale tall oil fatty acid with moderate rosin acid content and an anionic wetting and dispersing agent. It improves substrate wetting, enhances viscosity stability and prevents hard settling while increasing the pigment grinding speed. It is designed for systems such as alkyds, drying oils, amino resins, vinyls, acrylics, oil modified urethanes, polyesters, and epoxy esters. 收起 | |
| HSWADA-60 | PCI Group, Inc. | HSWADA-60 is an amber colored blend of a functional capped amine with tall oil fatty acid. The resulting product is a wetting agent with high efficiency toward alkaline based pigments. It can be used with alkyd, drying oil, amino resin, vinyl, acrylic, oi...展开 HSWADA-60 is an amber colored blend of a functional capped amine with tall oil fatty acid. The resulting product is a wetting agent with high efficiency toward alkaline based pigments. It can be used with alkyd, drying oil, amino resin, vinyl, acrylic, oil modified urethane, polyester, epoxy, and epoxy ester coating systems. 收起 | |
| HSWADA-B | PCI Group, Inc. | HSWADA-B is an amber colored blend of amine chemistry with dimerized acids. The resulting product is a wetting agent with high efficiency toward acidic based pigments. It has an affinity for alkaline pigments. It can be used with alkyd, drying oil, amino ...展开 HSWADA-B is an amber colored blend of amine chemistry with dimerized acids. The resulting product is a wetting agent with high efficiency toward acidic based pigments. It has an affinity for alkaline pigments. It can be used with alkyd, drying oil, amino resin, vinyl, acrylic, oil modified urethane, polyester, epoxy, epoxy ester and polyester coating systems. 收起 | |
| Kaolin | Provencale S.A. | Kaolin, in the form of a hexagonal, flexible, thin lamina, is a naturally occurring raw material that can be used in dispersion paints or dispersion adhesives. Its density is 2.6 g/cm3 and it has a high aspect ratio of 1:40. | |
| LH-75 | PCI Group, Inc. | LH-75 is a slightly yellow amide polymer modifier additive that will improve depth of image (wet-look), enhance gloss, increase hardness and scratch resistance and will improve resin compatibility and flow. It can be used in many types of lacquers includi...展开 LH-75 is a slightly yellow amide polymer modifier additive that will improve depth of image (wet-look), enhance gloss, increase hardness and scratch resistance and will improve resin compatibility and flow. It can be used in many types of lacquers including nitrocellulose, acrylic, polyurethane and acid-catalyzed varnishes. It is also effective in polyester / melamine systems. It is not recommended in systems with a high level of aliphatic hydrocarbons. 收起 | |
| MFA 31 | PCI Group, Inc. | MFA 31 is a non-ionic, clear, recoatable polyalkyeneoxide modified polydimethylsiloxane developed for water-borne and water-reducible systems. It can be used to eliminate film defects, such as craters, through refined flow and leveling. It also enhances c...展开 MFA 31 is a non-ionic, clear, recoatable polyalkyeneoxide modified polydimethylsiloxane developed for water-borne and water-reducible systems. It can be used to eliminate film defects, such as craters, through refined flow and leveling. It also enhances color uniformity and allows for sharper gloss. 收起 | |
| Mikhart® 0.35-0.7 | Provencale S.A. | Mikhart® 0.35-0.7, in the form of a white powder, is a calcium carbonate that can be used as a filler in paints and coatings. This product's particle size range is between .25 and .9 mm. Its specific gravity is 2.7 and its refractive index is 1.59. | |
| Mikhart® 0.5-1 | Provencale S.A. | Mikhart® 0.5-1, in the form of a white powder, is a calcium carbonate that can be used as a filler in paints and coatings. This product's particle size range is between 0.7-1.2 mm. Its specific gravity is 2.7 and its refractive index is 1.59. | |
| Mikhart® 0.5-1.5 | Provencale S.A. | Mikhart® 0.5-1.5, in the form of a white powder, is a calcium carbonate that can be used as a filler in paints and coatings. This product's particle size range is between 0.63-1.8 mm. Its specific gravity is 2.7 and its refractive index is 1.59. | |
| Mikhart® 1 | Provencale S.A. | Mikhart® 1, in the form of a white powder, is a calcium carbonate that can be used as a filler in paints and coatings. This product's mean particle size is 1.7 microns. Its specific gravity is 2.7 and its refractive index is 1.59. | |
| Mikhart® 1-2 | Provencale S.A. | Mikhart® 1-2, in the form of a white powder, is a calcium carbonate that can be used as a filler in paints and coatings. This product's particle size range is between 1.4-2.5 mm. Its specific gravity is 2.7 and its refractive index is 1.59. | |
| Mikhart® 10 | Provencale S.A. | Mikhart® 10, in the form of a white powder, is a calcium carbonate that can be used as a filler in paints and coatings. This product's mean particle size is 10 microns. Its specific gravity is 2.7 and its refractive index is 1.59. | |
| Mikhart® 110 | Provencale S.A. | Mikhart® 110, in the form of a white powder, is a calcium carbonate that can be used as a filler in paints and coatings. This product's particle size range is between 0-1 mm. Its specific gravity is 2.7 and its refractive index is 1.59. | |
| Mikhart® 130 | Provencale S.A. | Mikhart® 130, in the form of a white powder, is a calcium carbonate that can be used as a filler in paints and coatings. This product's mean particle size is 140 microns. Its specific gravity is 2.7 and its refractive index is 1.59. | |
| Mikhart® 15 | Provencale S.A. | Mikhart® 15, in the form of a white powder, is a calcium carbonate that can be used as a filler in paints and coatings. This product's mean particle size is 17 microns. Its specific gravity is 2.7 and its refractive index is 1.59. | |
| Mikhart® 2 | Provencale S.A. | Mikhart® 2, in the form of a white powder, is a calcium carbonate that can be used as a filler in paints and coatings. This product's mean particle size is 3 microns. Its specific gravity is 2.7 and its refractive index is 1.59. | |
| Mikhart® 40 | Provencale S.A. | Mikhart® 40, in the form of a white powder, is a calcium carbonate that can be used as a filler in paints and coatings. This product's mean particle size is 30 microns. Its specific gravity is 2.7 and its refractive index is 1.59. | |
| Mikhart® 5 | Provencale S.A. | Mikhart® 5, in the form of a white powder, is a calcium carbonate that can be used as a filler in paints and coatings. This product's mean particle size is 5 microns. Its specific gravity is 2.7 and its refractive index is 1.59. | |
| Mikhart® 65 | Provencale S.A. | Mikhart® 65, in the form of a white powder, is a calcium carbonate that can be used as a filler in paints and coatings. This product's mean particle size is 60 microns. Its specific gravity is 2.7 and its refractive index is 1.59. | |
| Mikhart® M | Provencale S.A. | Mikhart® M, in the form of a white powder, is a calcium carbonate that can be used as a filler in paints and coatings. This product's mean particle size is 3.5 microns. Its specific gravity is 2.7 and its refractive index is 1.59. | |
| Mikhart® MU08 | Provencale S.A. | Mikhart® MU08, in the form of a white powder, is a calcium carbonate that can be used as a filler in paints and coatings. This product's mean particle size is .9 microns. Its specific gravity is 2.7 and its refractive index is 1.59. | |
| Mikhart® MU12 | Provencale S.A. | Mikhart® MU12, in the form of a white powder, is a calcium carbonate that can be used as a filler in paints and coatings. This product's mean particle size is 1.2 microns. Its specific gravity is 2.7 and its refractive index is 1.59. | |
| Mikhart® SPL | Provencale S.A. | Mikhart® SPL, in the form of a white powder, is a calcium carbonate that can be used as a filler in paints and coatings. This product's mean particle size is 20 microns. Its specific gravity is 2.7 and its refractive index is 1.59. | |
| NOFO 1032 | PCI Group, Inc. | NOFO 1032 is a blend of clear silicone and organic acid esters. It is used in most non-aqueous based coating systems, adhesives and inks. It fosters the release of air from high build epoxy, urethane, and casting resins. It is stable over a wide temperatu...展开 NOFO 1032 is a blend of clear silicone and organic acid esters. It is used in most non-aqueous based coating systems, adhesives and inks. It fosters the release of air from high build epoxy, urethane, and casting resins. It is stable over a wide temperature range and will not cause surface defects associated with most silicone defoamers. 收起 | |
| NVOCF-WB | PCI Group, Inc. | NVOCF-WB is a clear liquid, non-ionic, water soluble fluorosurfactant designed to improve flow, leveling and surface appearance of water based coating systems. It contains no volatile organic components, has excellent water solubility and is recommended f...展开 NVOCF-WB is a clear liquid, non-ionic, water soluble fluorosurfactant designed to improve flow, leveling and surface appearance of water based coating systems. It contains no volatile organic components, has excellent water solubility and is recommended for use in clear coatings. NVOCF-WB can be added at any point during the manufacturing and/or use processes. 收起 | |
| OWSS | PCI Group, Inc. | OWSS is a non-ionic, clear liquid which acts as a multifunctional solubilizer and surfactant. It can be used in a wide range of products and applications including paint & coatings, water based degreasers and printing inks. | |
| RAMA | PCI Group, Inc. | RAMA is a recoatable, clear-colored blend of Alkyl-Aryl modified silicones. It is used to improve mar resistance without the standard recoat problems of common silicones. It can be used in virtually all solvent-borne systems to reduce flooding and floatin...展开 RAMA is a recoatable, clear-colored blend of Alkyl-Aryl modified silicones. It is used to improve mar resistance without the standard recoat problems of common silicones. It can be used in virtually all solvent-borne systems to reduce flooding and floating, improve flow, sharpen gloss and improve slip. 收起 | |
| SA #1 | PCI Group, Inc. | SA #1 is a clear-colored silicone blend useful in high solids coatings. Its primary function is to improve flow and leveling during application, including elimination of bubbles during application, reducing orange peel and improving the final product's ma...展开 SA #1 is a clear-colored silicone blend useful in high solids coatings. Its primary function is to improve flow and leveling during application, including elimination of bubbles during application, reducing orange peel and improving the final product's mar resistance. It can be used in virtually all high solids resins. 收起 | |
| SAFA 302 | PCI Group, Inc. | SAFA 302 is a clear-colored blend comprised of polyether modified dimethlylpolysiloxane and silicone glycol co-polymer. Together, these provide defoaming, mar resistance, increased resin compatibility, surface tension reduction and lowering of the coeffic...展开 SAFA 302 is a clear-colored blend comprised of polyether modified dimethlylpolysiloxane and silicone glycol co-polymer. Together, these provide defoaming, mar resistance, increased resin compatibility, surface tension reduction and lowering of the coefficient of friction. It is compatible with most types of solvent and water systems, including emulsions. 收起 | |
| SCABA | PCI Group, Inc. | SCABA is a light amber reactive polyamide resin solution that is intended to increase viscosity and improve sag resistance for pigmented systems. It can be used in acid-catalyzed, alkyds (short, medium and long oils), epoxy, epoxy ester, polyurethane and ...展开 SCABA is a light amber reactive polyamide resin solution that is intended to increase viscosity and improve sag resistance for pigmented systems. It can be used in acid-catalyzed, alkyds (short, medium and long oils), epoxy, epoxy ester, polyurethane and polyester. 收起 | |
| SLICKO 1000 | PCI Group, Inc. | SLICKO 1000 is a clear liquid with a medium viscosity. It is a blend of linear dimethicone polymers and aliphatic solvent, used as an automotive, aircraft and aerospace paint additive. It can be added in small quantities, approximately 0.1% by weight or v...展开 SLICKO 1000 is a clear liquid with a medium viscosity. It is a blend of linear dimethicone polymers and aliphatic solvent, used as an automotive, aircraft and aerospace paint additive. It can be added in small quantities, approximately 0.1% by weight or volume, to eliminate fish-eye and enhance gloss and scratch/mar resistance. It is not reactive and is effective in all solvent based enamels, lacquers and synthetic paints, including catalyzed systems such as urethanes. 收起 | |
| So-Thick 30 | PCI Group, Inc. | So-Thick 30 is a translucent, non-ionic, non-urethane based associative thickener. It is specifically designed for high quality latex paints, high gloss, semi gloss and flat finishes in interior or exterior applications. It provides flow, leveling and thi...展开 So-Thick 30 is a translucent, non-ionic, non-urethane based associative thickener. It is specifically designed for high quality latex paints, high gloss, semi gloss and flat finishes in interior or exterior applications. It provides flow, leveling and thinning enhancements, good color acceptance and sag resistance. It can also be used in adhesives, sealants and inks. 收起 | |
| SSAWB | PCI Group, Inc. | SSAWB is a milky white additive allowing the formulator to create a sanding sealer from existing top coat products. It allows the wood to be sealed and filled completely prior to a finishing top coat. It provides a product which reduces grain raising, san...展开 SSAWB is a milky white additive allowing the formulator to create a sanding sealer from existing top coat products. It allows the wood to be sealed and filled completely prior to a finishing top coat. It provides a product which reduces grain raising, sands easily and is compatible with most water based topcoats. 收起 | |
| SWASW | PCI Group, Inc. | SWASW is a nonionic, clear liquid comprised of a fluoropolymer/silicone glycol polymer hybrid superspreader and a superwetting agent. It can be used in both solvent and waterborne systems. It is designed to significantly reduce surface tension, improve fl...展开 SWASW is a nonionic, clear liquid comprised of a fluoropolymer/silicone glycol polymer hybrid superspreader and a superwetting agent. It can be used in both solvent and waterborne systems. It is designed to significantly reduce surface tension, improve flow, leveling, surface appearance and overall performance by direct addition into coating and ink systems. 收起 | |
| TA-816 | PCI Group, Inc. | TA-816 is a reactive siloxane polymer blend which can produce a rough or textured appearance to paints and coatings. It can be used with lacquers, alkyd, epoxy, melamine phenolic, polyester and urethane systems. | |
| Talkron® CLASSIC | Provencale S.A. | Talkron® CLASSIC, in the form of a white powder, is a mix of talc and chlorite that has a lamellar structure. This product can be used in industrial, anti-corrosion, and decorative paints. It is indicated for systems where a low level of whiteness is re...展开 Talkron® CLASSIC, in the form of a white powder, is a mix of talc and chlorite that has a lamellar structure. This product can be used in industrial, anti-corrosion, and decorative paints. It is indicated for systems where a low level of whiteness is required, and its properties allow the user to regulate and adjust the gloss levels when required. 收起 | |
| Talkron® NATUR | Provencale S.A. | Talkron® NATUR, in the form of a white powder, is a talc of high purity that has a lamellar structure and good whiteness. This product can be used in decorative and industrial paints and in plastics. Its platy particles create a barrier effect in interi...展开 Talkron® NATUR, in the form of a white powder, is a talc of high purity that has a lamellar structure and good whiteness. This product can be used in decorative and industrial paints and in plastics. Its platy particles create a barrier effect in interior or exterior coatings. 收起 | |
| Talkron® PURE | Provencale S.A. | Talkron® PURE, in the form of a white powder, is a high-purity talc with good whiteness. This product can be used in hydrophobic indoor and outdoor coatings. It confers dry-hiding properties and can act as a partial replacement for titanium dioxide. | |
| Talkron® STYL | Provencale S.A. | Talkron® STYL, in the form of a white powder, is a blend of talc, calcium carbonate, and magnesium. This product has a mostly lamellar structure, and can be used in water-based coatings. Its different particle sizes allow the user to regulate and adjust...展开 Talkron® STYL, in the form of a white powder, is a blend of talc, calcium carbonate, and magnesium. This product has a mostly lamellar structure, and can be used in water-based coatings. Its different particle sizes allow the user to regulate and adjust the gloss and whiteness of the end product. 收起 | |
| Talkron® ZERO | Provencale S.A. | Talkron® ZERO, in the form of a white powder, is a high-purity talc with a lamellar structure and a good grade of whiteness. This product can be used in high-solids coatings. It is a de-dusted talc with low oil absorption and low surface area. It has a...展开 Talkron® ZERO, in the form of a white powder, is a high-purity talc with a lamellar structure and a good grade of whiteness. This product can be used in high-solids coatings. It is a de-dusted talc with low oil absorption and low surface area. It has anti-corrosive, hydrophobic, and weather-resistant characteristics. 收起 | |
| WBAFD | PCI Group, Inc. | WBAFD is a water-soluble blend of unique siloxane copolymers and castor polyethylene ethers with a milky appearance. It can be used in a variety of water based coating systems. It fosters the release and anti-foaming of a number of water based coatings an...展开 WBAFD is a water-soluble blend of unique siloxane copolymers and castor polyethylene ethers with a milky appearance. It can be used in a variety of water based coating systems. It fosters the release and anti-foaming of a number of water based coatings and inks. It is stable over wide temperature range and will not contribute to surface defects associated with some silicone defoamers. 收起 | |
| WBWADA-60 | PCI Group, Inc. | WBWADA-60 is an amber colored blend of a functional capped amine with tall oil fatty acid. The resulting product is a wetting agent with high efficiency toward alkaline based pigments used in solution acrylics, polyesters, alkyds and epoxies. | |
| WBWADA-B | PCI Group, Inc. | WBWADA-B is an amber colored blend of amine chemistry with dimerized acid. The resulting product is a wetting agent with high efficiency toward acidic based pigments used in solution acrylics, polyesters, alkyds and epoxies. It also has a weak affinity fo...展开 WBWADA-B is an amber colored blend of amine chemistry with dimerized acid. The resulting product is a wetting agent with high efficiency toward acidic based pigments used in solution acrylics, polyesters, alkyds and epoxies. It also has a weak affinity for alkaline pigments, which should be considered when both acid and base pigments are present. 收起 | |
| Wollastonite | Provencale S.A. | Wollastonite, in the form of a white powder, is a calcium silicate. This product is formed from calcium carbonate and silicon dioxide and can be used in powder coatings and anti-corrosive coatings for plastics. Specific processing technologies allow the...展开 Wollastonite, in the form of a white powder, is a calcium silicate. This product is formed from calcium carbonate and silicon dioxide and can be used in powder coatings and anti-corrosive coatings for plastics. Specific processing technologies allow the particle structures to vary from nearly block-like with a low aspect ratio to acicular structures with a high aspect ratio. 收起 | |
| WRACLA | PCI Group, Inc. | WRACLA is a clear colored, anionic fluorosurfactant designed for use in water-based coating systems. It fosters improved wetting, enhanced adhesion, improves leveling and reduces edge pull. It is also used to enhance adhesion to chalky surfaces in aqueous...展开 WRACLA is a clear colored, anionic fluorosurfactant designed for use in water-based coating systems. It fosters improved wetting, enhanced adhesion, improves leveling and reduces edge pull. It is also used to enhance adhesion to chalky surfaces in aqueous coatings. 收起 | |
| WREAMA | PCI Group, Inc. | WREAMA is a clear solution of a polyether-modified dimethyl polysiloxane co-polymer designed for use in all water based and water reducible alkyd resin systems. It is used to improve mar resistance, slip, flow and to enhance gloss. |
