UL Prospector

成功!

成功保存搜索结果
99.99% Conductive Shining Flake Silver Powder Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 99.99% Conductive Shining Flake Silver Powders are different silver powder products are chosen according to different use conditions. Low apparent density flake silver powders is the main raw material in production of conductive coating, membrane switch, ...展开 99.99% Conductive Shining Flake Silver Powders are different silver powder products are chosen according to different use conditions. Low apparent density flake silver powders is the main raw material in production of conductive coating, membrane switch, conductive inks, conductive rubber, conductive plastic, conductive ceramics.Low apparent density flake silver powder is mainly used in the low temperature electronic paste, conductive inks, conductive coatings, electromagnetic shielding coatings. the coating configurated by flake silver powder, whose liquidity and resistance to settlement is good, the coating area is large. 收起
99.99% Conductive Silver Powder (Spherical) Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 99.99% Conductive Silver Powder (Spherical) are widely used in electronic pastes, electronic products, electrical conductivity, electromagnetic shielding, anti-bacterial, and anti-virus applications.
Acetylated Distarch Ddipate Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Acetylated Distarch Ddipate has a certain ability of anti-acid and anti-alkali, anti-cutting ability, is of good viscosity. It is used it as thickening agent, premium quality stabiliser in wallpaper adhesive.
Acetylated Distarch Phosphate Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Acetylated Distarch Phosphate is a fine white to off white powder with characteristic starch taste and odor. Compared with the original starch, the solubility, swelling power and transparency were significantly increased, the aging tendency was significan...展开 Acetylated Distarch Phosphate is a fine white to off white powder with characteristic starch taste and odor. Compared with the original starch, the solubility, swelling power and transparency were significantly increased, the aging tendency was significantly decreased, and the freezing stability was improved. This product is heat-resistant and acid-resistant. It is used it as thickening agent in wallpaper adhesive. 收起
Cardanol Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Cardanol is made from national cashew nut shell oil, in a high vacuum distillation and solvent extraction processes to obtain industrial cardanol, it can substitute or partial substitute for the production of high performance phenolic resin, epoxy curing ...展开 Cardanol is made from national cashew nut shell oil, in a high vacuum distillation and solvent extraction processes to obtain industrial cardanol, it can substitute or partial substitute for the production of high performance phenolic resin, epoxy curing agents, surfactants, adhesives, paints, and other products used in the manufacture of friction materials epoxy curing agent, liquid phenolic resin, liquid or powdered thermosetting phenolic resin. 收起
Cardanol T-60 Epoxy Curing Agent Shandong Huijin Chemical Co., Ltd. Cardanol T-60 Epoxy Curing Agent is a yellowish/brownish/red transparent viscous liquid that is non-toxic, and requires little to no dilution. Its main applications are to be in adhesives, sealants, anitiseptics, casting and laminated material. It has an ...展开 Cardanol T-60 Epoxy Curing Agent is a yellowish/brownish/red transparent viscous liquid that is non-toxic, and requires little to no dilution. Its main applications are to be in adhesives, sealants, anitiseptics, casting and laminated material. It has an excellent resistance to weather and corrosion, and has a viscosity level of =5000. 收起
Cardanol T-61 Epoxy Curing Agent Shandong Huijin Chemical Co., Ltd. Cardanol T-61 Epoxy Curing Agent is a yellowish/brownish/red transparent viscous liquid that is non-toxic, and requires little to no dilution. Its main applications are to be in anitiseptics,adhesives, sealants, casting and laminated material. It has an e...展开 Cardanol T-61 Epoxy Curing Agent is a yellowish/brownish/red transparent viscous liquid that is non-toxic, and requires little to no dilution. Its main applications are to be in anitiseptics,adhesives, sealants, casting and laminated material. It has an excellent resistance to weather and corrosion, and has a viscosity level of 800-1500. 收起
Cardanol T-62 Epoxy Curing Agent Shandong Huijin Chemical Co., Ltd. Cardanol T-62 Epoxy Curing Agent is a yellowish/brownish/red transparent viscous liquid that is non-toxic, and requires little to no dilution. Its main applications are to be in anitiseptics,adhesives, sealants, casting and laminated material. It has an g...展开 Cardanol T-62 Epoxy Curing Agent is a yellowish/brownish/red transparent viscous liquid that is non-toxic, and requires little to no dilution. Its main applications are to be in anitiseptics,adhesives, sealants, casting and laminated material. It has an good resistance to corrosion, weather, and has a viscosity level of 400-800. 收起
Conventional Dimer Acid HJ-126 Shandong Huijin Chemical Co., Ltd. Conventional Dimer Acid HJ-126 is a non-toxic solvent that has a high purity level. This compound is created from 18 carbon unsaturated acids via intermolecular forces. It also does not freeze in low temperatures and it is soluble in most organic solvent...展开 Conventional Dimer Acid HJ-126 is a non-toxic solvent that has a high purity level. This compound is created from 18 carbon unsaturated acids via intermolecular forces. It also does not freeze in low temperatures and it is soluble in most organic solvents. Dimer acid has stable performance and is also non-volatile, has a high flash point and fire point, good liquidity. This product is used as a component to make hot-melt adhesives. 收起
Conventional Dimer Acid HJ-136 Shandong Huijin Chemical Co., Ltd. Conventional Dimer Acid HJ-136 is a product that has a high purity level and is also non-toxic. This compound is created from 18 carbon unsaturated acids via intermolecular forces. Dimer acid has stable performance and is also non-volatile, has a high fla...展开 Conventional Dimer Acid HJ-136 is a product that has a high purity level and is also non-toxic. This compound is created from 18 carbon unsaturated acids via intermolecular forces. Dimer acid has stable performance and is also non-volatile, has a high flash point and fire point, good liquidity. It also does not freeze in low temperatures and it is soluble in most organic solvents.This product is used as a component to make hot-melt adhesives. 收起
Conventional Dimer Acid HJ-156 Shandong Huijin Chemical Co., Ltd. Conventional Dimer Acid HJ-156 is a product that has a high purity level and is also non-toxic. This compound is created from 18 carbon unsaturated acids via intermolecular forces. Dimer acid is a non-volatile substance that has stable performance, has a ...展开 Conventional Dimer Acid HJ-156 is a product that has a high purity level and is also non-toxic. This compound is created from 18 carbon unsaturated acids via intermolecular forces. Dimer acid is a non-volatile substance that has stable performance, has a high flash point and fire point and good liquidity. It is soluble in most organic solvents and also does not freeze in low temperatures. This product is used as a component to make hot-melt adhesives. 收起
Conventional Dimer Acid HJ-166 Shandong Huijin Chemical Co., Ltd. Conventional Dimer Acid HJ-156 is a product that has a high purity level and is also non-toxic. This compound is created from 18 carbon unsaturated acids via intermolecular forces. It is primarily used as a component to make hot-melt adhesives. Dimer acid...展开 Conventional Dimer Acid HJ-156 is a product that has a high purity level and is also non-toxic. This compound is created from 18 carbon unsaturated acids via intermolecular forces. It is primarily used as a component to make hot-melt adhesives. Dimer acid is a non-volatile substance that has stable performance, has a high flash point and fire point and good liquidity. It is soluble in most organic solvents and also does not freeze in low temperatures. 收起
Epoxy Resin 8132 Shandong Huijin Chemical Co., Ltd. Epoxy Resin 8132 is a polymer that is formed by reacting epoxide units. When this product is cross-linked or hardened with compatible curing agents, it forms excellent adhesive, mechanical, chemical and dielectric resistance properties. Epoxy Resin 8132...展开 Epoxy Resin 8132 is a polymer that is formed by reacting epoxide units. When this product is cross-linked or hardened with compatible curing agents, it forms excellent adhesive, mechanical, chemical and dielectric resistance properties. Epoxy Resin 8132 is a highly versatile substance which has become a standard when used in formulation, fabrication and fusion technology. It is specially designed for applications requiring low viscosity, minimal odor and good color. This product is best utilized as an adhesive for flooring, crack injection systems, exposed aggregate wall matrix and wet lay up laminates. 收起
Epoxy Resin HJ828 Shandong Huijin Chemical Co., Ltd. Epoxy Resin HJ828 is a polymer that is formed by reacting epoxide units. When this product is cross-linked or hardened with compatible curing agents, it forms excellent mechanical, adhesive, dielectric and chemical resistance properties. Epoxy Resin is a ...展开 Epoxy Resin HJ828 is a polymer that is formed by reacting epoxide units. When this product is cross-linked or hardened with compatible curing agents, it forms excellent mechanical, adhesive, dielectric and chemical resistance properties. Epoxy Resin is a highly versatile substance which has become a standard when used in formulation, fabrication and fusion technology. This product is best utilized as an adhesive and structural material. 收起
ExBar™ 200 Excalibar Minerals LLC ExBar™ 200 is a raw mineral material that is manufactured from natural barium sulfate ore. This product is used in many different applications such as paints, adhesives and sealants. It has a median particle size of 15.0u and an oil absorption of 9.
ExBar™ 325 Excalibar Minerals LLC ExBar™ 325 is a raw mineral material that is manufactured from natural barium sulfate ore. This product is used in many different applications such as paints, adhesives and sealants. It has a median particle size of 10.0u and an oil absorption of 10.
ExBar™ 400 Excalibar Minerals LLC ExBar™ 400 is a raw mineral material that is manufactured from natural barium sulfate ore. This product is used in many different applications such as paints, adhesives and sealants. It has a median particle size of 8.0u and an oil absorption of 12.
ExBar™ W 1 Excalibar Minerals LLC ExBar™ W 1 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 1 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 1u and an oil absorption of 15. 收起
ExBar™ W 2 Excalibar Minerals LLC ExBar™ W 2 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 2 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 2u and an oil absorption of 13. 收起
ExBar™ W 3 Excalibar Minerals LLC ExBar™ W 3 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 3 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 3u and an oil absorption of 13. 收起
ExBar™ W 325 Excalibar Minerals LLC ExBar™ W 325 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are pr...展开 ExBar™ W 325 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. 收起
ExBar™ W 4 Excalibar Minerals LLC ExBar™ W 4 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 4 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 4u and an oil absorption of 12. 收起
ExBar™ W 400 Excalibar Minerals LLC ExBar™ W 400 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are pr...展开 ExBar™ W 400 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 8u and an oil absorption of 10. 收起
ExCal® 100 Excalibar Minerals LLC ExCal® 100 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications.
ExCal® 200 Excalibar Minerals LLC ExCal® 200 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications.
ExCal® 325 Excalibar Minerals LLC ExCal® 325 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications.
ExCal® 400 Excalibar Minerals LLC ExCal® 400 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications.
ExCal® CW 100 Excalibar Minerals LLC ExCal® CW 100 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand ar...展开 ExCal® CW 100 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand are a standard. 收起
ExCal® CW 200 Excalibar Minerals LLC ExCal® CW 200 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand ar...展开 ExCal® CW 200 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand are a standard. 收起
ExCal® CW 325 Excalibar Minerals LLC ExCal® CW 325 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand ar...展开 ExCal® CW 325 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand are a standard. 收起
Fumed Silica Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Fumed silica is a high value-added fine chemical product; it is a white, loose, amorphous, non-toxic, non-polluting inorganic non-metallic oxide.The primary particle size betweens 7 ~ 40nm and the specific surface area is generally greater than 100m2 / g....展开 Fumed silica is a high value-added fine chemical product; it is a white, loose, amorphous, non-toxic, non-polluting inorganic non-metallic oxide.The primary particle size betweens 7 ~ 40nm and the specific surface area is generally greater than 100m2 / g. Because of its nano-effects, in the material the fumed silica exhibits excellent properties of reinforcing, thickening, thixotropic, insulation, matting, anti-sagging, which are widely used in the silicone rubber (polyester plastics, sealing materials,etc.), siliconeglue (adhesives,paints,coatings,etc.)and high-performance fibers, new synthetic unsaturated resin, electric insulation, inks, pharmaceuticals, paper, food, cosmetics, chemical mechanical polishing, etc., to be known as the "industrial MSG". 收起
HJT-31A Epoxy Resin Curing Agent Shandong Huijin Chemical Co., Ltd. HJT-31A Epoxy Resin Curing Agent is created from a reaction with phenolic resin modified EDA. This product can cure very fast and has a low toxicity level. It can cure at around 0*Celsius so it has a very good resistance to temperature. The curing film ha...展开 HJT-31A Epoxy Resin Curing Agent is created from a reaction with phenolic resin modified EDA. This product can cure very fast and has a low toxicity level. It can cure at around 0*Celsius so it has a very good resistance to temperature. The curing film has good salt-resistance, alkali-resistance, salt-resistance and is highly impermiable. This product can best be used in water proofing projects, pipeline prime coatings, ship industrial paint prime coatings, flooring coatings and adhesives. It has a viscosity level of 500-1500. 收起
HJT-31B Epoxy Resin Curing Agent Shandong Huijin Chemical Co., Ltd. HJT-31B Epoxy Resin Curing Agent is created from a reaction with phenolic resin modified EDA. This product can cure very fast has a low toxicity level. It can cure at around 0*Celsius so it has a very good resistance to temperature. The curing film has go...展开 HJT-31B Epoxy Resin Curing Agent is created from a reaction with phenolic resin modified EDA. This product can cure very fast has a low toxicity level. It can cure at around 0*Celsius so it has a very good resistance to temperature. The curing film has good alkali-resistance, salt-resistance and is highly impermiable. This product can best be used in water proofing projects, pipeline prime coatings, ship industrial paint prime coatings, flooring coatings and adhesives. It has a viscosity level of 200-1000. 收起
HJT-31C Epoxy Resin Curing Agent Shandong Huijin Chemical Co., Ltd. HJT-31C Epoxy Resin Curing Agent is created from a reaction with phenolic resin modified EDA. This product can cure very fast and has a low toxicity level. It can cure at around 0*Celsius so it has a very good resistance to temperature. The curing film ha...展开 HJT-31C Epoxy Resin Curing Agent is created from a reaction with phenolic resin modified EDA. This product can cure very fast and has a low toxicity level. It can cure at around 0*Celsius so it has a very good resistance to temperature. The curing film has good alkali-resistance, salt-resistance and is highly impermiable. This product can best be used in water proofing projects, pipeline prime coatings, ship industrial paint prime coatings, flooring coatings and adhesives. It has a viscosity level of 1000-3000. 收起
HJT-31D Epoxy Resin Curing Agent Shandong Huijin Chemical Co., Ltd. HJT-31D Epoxy Resin Curing Agent is created from a reaction with phenolic resin modified EDA. This product can cure very fast and has a low toxicity level. It has a very good resistance to temperature so it can cure at around 0*Celsius. The curing film is...展开 HJT-31D Epoxy Resin Curing Agent is created from a reaction with phenolic resin modified EDA. This product can cure very fast and has a low toxicity level. It has a very good resistance to temperature so it can cure at around 0*Celsius. The curing film is highly impermiable, has good alkali-resistance and salt-resistance. This product can best be used in water proofing projects, pipeline prime coatings, ship industrial paint prime coatings, flooring coatings and adhesives. It has a viscosity level of 200-600. 收起
High Purity Dimer Acid HJ-13 Shandong Huijin Chemical Co., Ltd. High Purity Dimer Acid HJ-13 is a yellow transparent viscous liquid that is primarily used to compose hot melt adhesives. It is a raw material that has a high level of purity and it is non-toxic and non-volatile. It also does not freeze in cold conditions...展开 High Purity Dimer Acid HJ-13 is a yellow transparent viscous liquid that is primarily used to compose hot melt adhesives. It is a raw material that has a high level of purity and it is non-toxic and non-volatile. It also does not freeze in cold conditions and is highly soluble. 收起
Hydroxypropyl Aistarch Phosphate Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Hydroxypropyl Aistarch Phosphate is a fine white to off white powder with a characteristic odor. This product has good cutting resistance, good acid and alkali resistance, and high viscosity. It is used it as thickening agent in wallpaper adhesive.
Industrial Grade Zinc Oxide Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Industrial Grade Zinc Oxide is a white, small grain zinc oxide used in production of products like Zinc stearate, zinc bromide, zinc borate, phosphatizing liquid, as well as used in preparation of electroplate liquid.
Methyltriethoxysilane Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Methyltriethoxysilane is an industrial grade colorless, transparent liquid. It is used as water repellent to improve fillers dispersibility and reduces their sedimentation tendency. It can also be used as an important component for sol-gel coating, silico...展开 Methyltriethoxysilane is an industrial grade colorless, transparent liquid. It is used as water repellent to improve fillers dispersibility and reduces their sedimentation tendency. It can also be used as an important component for sol-gel coating, silicone resins and silicone rubber,silicone resins and silicone rubber. 收起
Methyltrimethoxysilane Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Methyltrimethoxysilane is a colorless, low-viscosity liquid, regarded as trifunctional since all three alkoxy groups are able to participate in this reaction. Additionally it contains a methyl group that adds organic character to the products. It is mainl...展开 Methyltrimethoxysilane is a colorless, low-viscosity liquid, regarded as trifunctional since all three alkoxy groups are able to participate in this reaction. Additionally it contains a methyl group that adds organic character to the products. It is mainly used as the crosslinking agent of room temperature vulcanized silicone rubber, as well as the glass fiber surface treatment agent and reinforced plastic laminate treatment agent, in order to improve the mechanical strength of products, heat resistance, moisture resistance. 收起
Modified Starch - Compound Active Printing Paste Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Modified Starch - Compound Active Printing Paste is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological pro...展开 Modified Starch - Compound Active Printing Paste is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holding water capacity, screening, dilution resistance, alkali and salt resistance. It also overcomes the disadvantages of the traditional sodium alginate printing paste in the printing process such as the low color yield and brilliance, bad screening and short retention time of the original paste. The performance/price ratio of this paste is much higher than the sodium alginate and it is the most advanced printing paste products at present. 收起
Modified Starch - High End Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Modified Starch - High End is ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holdi...展开 Modified Starch - High End is ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holding water capacity, screening, dilution resistance, alkali and salt resistance. It also overcomes the disadvantages of the traditional sodium alginate printing paste in the printing process such as the low color yield and brilliance, bad screening and short retention time of the original paste. 收起
Modified Starch - Mid Range Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Modified Starch - Mid Range is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, ...展开 Modified Starch - Mid Range is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holding water capacity, screening, dilution resistance, alkali and salt resistance. It also overcomes the disadvantages of the traditional sodium alginate printing paste in the printing process such as the low color yield and brilliance, bad screening and short retention time of the original paste. The performance/price ratio of this paste is much higher than the sodium alginate and it is the most advanced printing paste products at present. 收起
Monomer Acid Shandong Huijin Chemical Co., Ltd. Monomer Acid is a white or yellowish oil-like solid that is soluble in most organic solvents but it is insoluble in water. It is made from rectified plant oleic acid by adopting advanced polymerization technology and molecular distillation technology. Thi...展开 Monomer Acid is a white or yellowish oil-like solid that is soluble in most organic solvents but it is insoluble in water. It is made from rectified plant oleic acid by adopting advanced polymerization technology and molecular distillation technology. This product is to be mainly used in making alkyd resin coating, isomeric acid, cosmetics and pharmaceutical intermediates. 收起
ND-22 Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 ND-22 is used as cross-linking agent for RTV Silicone Rubber and reinforcing for epoxy fiber glass reinforced plastics, viscosity increaser for synthetic resin and raw stuff fabric racked agent.
Nano Silver Powder TFNP-30 Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Nano Silver Powder TFNP-30 is a moderate tap density,high dispersion, spherical nanometer silver powder. TFNP-30 is ideal for low-temperature sintering paste, low silver content and high conductive paste, and touchscreen slurry.
Nano Silver Powder TFNP-80 Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Nano Silver Powder TFNP-80 is a moderate tap density, nanoscale spherical monodisperse silver. It is mainly used as an additive material.
PVB Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Polyvinyl butyral (PVB) with hydrochloric acid as catalyst, is made from polyvinyl alcohol and butyl aldehyde. The abbreviate is PVB. High gloss, high transparent, non-toxic, smell-less, fast dissolve, etc. It’s good soluble with pigments and dyes. The PV...展开 Polyvinyl butyral (PVB) with hydrochloric acid as catalyst, is made from polyvinyl alcohol and butyl aldehyde. The abbreviate is PVB. High gloss, high transparent, non-toxic, smell-less, fast dissolve, etc. It’s good soluble with pigments and dyes. The PVB has high transparency, good cold resistance, water resistance, film forming properties and impact resistance, widely used in middle film of glass, ceramic flower paper, metal protective paint, tipping paper, aluminum foil, insulation paint, fiber treatment agent, finished parts, printing inks, dyes and so on. 收起
Polyamide Resin HJ-1014 Shandong Huijin Chemical Co., Ltd. Polyamide Resin HJ-1014 is a co-solvent product that is mainly used in paper printing inks and in gravure plastic printing inks. It has good adhesion on polyethylene materials. The ink that is made using this material has excellent adhesion, high gloss an...展开 Polyamide Resin HJ-1014 is a co-solvent product that is mainly used in paper printing inks and in gravure plastic printing inks. It has good adhesion on polyethylene materials. The ink that is made using this material has excellent adhesion, high gloss and a low freezing point. 收起
Polyamide Resin HJ-1417 Shandong Huijin Chemical Co., Ltd. Polyamide Resin HJ-1417 is a co-solvent product that is mainly used in gravure plastic printing inks and paper printing inks. It has good adhesion on polyethylene materials. The ink that is made using this material has good adhesion, high gloss and a low ...展开 Polyamide Resin HJ-1417 is a co-solvent product that is mainly used in gravure plastic printing inks and paper printing inks. It has good adhesion on polyethylene materials. The ink that is made using this material has good adhesion, high gloss and a low freezing point. 收起
Polyamide Resin HJ-1720 Shandong Huijin Chemical Co., Ltd. Polyamide Resin HJ-1720 is a co-solvent product that is mainly used in gravure plastic printing inks and paper printing inks. It also has good adhesion on polyethylene materials. The ink that is made using this product has excellent adhesion, high gloss a...展开 Polyamide Resin HJ-1720 is a co-solvent product that is mainly used in gravure plastic printing inks and paper printing inks. It also has good adhesion on polyethylene materials. The ink that is made using this product has excellent adhesion, high gloss and a low freezing point. 收起
Polyamide Resin HJ-2000 Shandong Huijin Chemical Co., Ltd. Polyamide Resin HJ-2000 is an alcohol soluble product that is mainly used in paper printing inks and gravure plastic printing inks. It also has good adhesion on polyethylene materials. The ink that is made using this product has excellent adhesion with a ...展开 Polyamide Resin HJ-2000 is an alcohol soluble product that is mainly used in paper printing inks and gravure plastic printing inks. It also has good adhesion on polyethylene materials. The ink that is made using this product has excellent adhesion with a high gloss and a low freezing point. 收起
Polyamide Resin HJ-588B Shandong Huijin Chemical Co., Ltd. Polyamide Resin HJ-588B is co-solvent product that is mainly used in paper printing inks and gravure plastic printing inks. It also has good adhesion on polyethylene materials. The ink that is made using this product has excellent adhesion with a high glo...展开 Polyamide Resin HJ-588B is co-solvent product that is mainly used in paper printing inks and gravure plastic printing inks. It also has good adhesion on polyethylene materials. The ink that is made using this product has excellent adhesion with a high gloss and has a good resistance to low temperatures. 收起
Polyamide Resin HJ-588C Shandong Huijin Chemical Co., Ltd. Polyamide Resin HJ-588C is an alcohol soluble substance that is primarily used in paper printing inks and gravure plastic printing inks. It also has good adhesion on polyethylene materials. The ink that is made using this product has excellent adhesion wi...展开 Polyamide Resin HJ-588C is an alcohol soluble substance that is primarily used in paper printing inks and gravure plastic printing inks. It also has good adhesion on polyethylene materials. The ink that is made using this product has excellent adhesion with a high gloss and has a good resistance to low temperatures. 收起
Polyamide Resin HJ-688B Shandong Huijin Chemical Co., Ltd. Polyamide Resin HJ-688B is primarily used in paper printing inks, gravure plastic printing inks and is co-solvent. It also has good adhesion on polyethylene materials and has a good resistance to low tempertatures. The ink that is made using this product ...展开 Polyamide Resin HJ-688B is primarily used in paper printing inks, gravure plastic printing inks and is co-solvent. It also has good adhesion on polyethylene materials and has a good resistance to low tempertatures. The ink that is made using this product has excellent adhesion with a high gloss. 收起
Polyamide Resin HJ-688C Shandong Huijin Chemical Co., Ltd. Polyamide Resin HJ-688C is primarily used in paper printing inks, gravure plastic printing inks and is alcohol soluble. It also has good adhesion on polyethylene materials and has a good resistance to low tempertatures. The ink that is made using this pro...展开 Polyamide Resin HJ-688C is primarily used in paper printing inks, gravure plastic printing inks and is alcohol soluble. It also has good adhesion on polyethylene materials and has a good resistance to low tempertatures. The ink that is made using this product has excellent adhesion with a high gloss. 收起
Polyamide Resin HJ-7010 Shandong Huijin Chemical Co., Ltd. Polyamide Resin H-7010 is a product that is mainly used in gravure plastic printing inks and also paper printing inks. It has good adhesion on polyethylene materials. The ink that is made using this material has excellent adhesion, high gloss and low free...展开 Polyamide Resin H-7010 is a product that is mainly used in gravure plastic printing inks and also paper printing inks. It has good adhesion on polyethylene materials. The ink that is made using this material has excellent adhesion, high gloss and low freezing point. 收起
Polyvinyl Alcohol Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Polyvinyl alcohol is an important chemical raw materials for the manufacture of polyvinyl acetal, resistance to gasoline pipelines and vinylon synthetic fibers, fabric treatment agents, emulsifiers, paper coatings, adhesives, glues and so on.
Precipitated Silica Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Precipitated silica is a relatively pure form of the mineral silica, which is produced by the chemical process known as precipitation. In chemical precipitation, a solid forms from a liquid due to a chemical reaction. Precipitated silica is formed by mixi...展开 Precipitated silica is a relatively pure form of the mineral silica, which is produced by the chemical process known as precipitation. In chemical precipitation, a solid forms from a liquid due to a chemical reaction. Precipitated silica is formed by mixing solutions of sodium silicate with sulfuric acid in water. A chemical reaction occurs, and pellets of pure silica form. 收起
Reactive Polyamide Resin 300 Shandong Huijin Chemical Co., Ltd. Reactive Polyamide Resin 300 is a light yellow transparent thick liquid which can be used as an anti-corrosion coating. It is also widely used in epoxy glue, antisepsis coatings and anti rust paint. This product also has adhesion and good curing qualities...展开 Reactive Polyamide Resin 300 is a light yellow transparent thick liquid which can be used as an anti-corrosion coating. It is also widely used in epoxy glue, antisepsis coatings and anti rust paint. This product also has adhesion and good curing qualities with an excellent resistance to impact. The 300 grade has more use as an adhesive and anti-corrosion coating. 收起
Reactive Polyamide Resin 400 (651) Shandong Huijin Chemical Co., Ltd. Reactive Polyamide Resin 400 (651) is a light yellow transparent thick liquid which can be used as an anti-corrosion coating. It is also widely used in epoxy glue, antisepsis coatings and anti rust paint. This product also has adhesion and good curing qua...展开 Reactive Polyamide Resin 400 (651) is a light yellow transparent thick liquid which can be used as an anti-corrosion coating. It is also widely used in epoxy glue, antisepsis coatings and anti rust paint. This product also has adhesion and good curing qualities with an excellent resistance to impact. This grade of the product (400) has more uses as a component to make adhesives and anti-corrosion coatings. 收起
Reactive Polyamide Resin 650 Shandong Huijin Chemical Co., Ltd. Reactive Polyamide Resin 650 is a light yellow transparent thick liquid which can be used as an anti-corrosion coating, an epoxy primer and coated mortar. It is also widely used in epoxy glue, antisepsis coatings and anti-rust paint. This product also ha...展开 Reactive Polyamide Resin 650 is a light yellow transparent thick liquid which can be used as an anti-corrosion coating, an epoxy primer and coated mortar. It is also widely used in epoxy glue, antisepsis coatings and anti-rust paint. This product also has good curing and adhesion qualities with an excellent resistance to impact. 收起
Reactive Polyamide Resin 650B Shandong Huijin Chemical Co., Ltd. Reactive Polyamide Resin 650B is widely used in epoxy glue, antisepsis coatings and anti rust paint. It is a light yellow transparent thick liquid which can be used as an anti-corrosion coating. This product also has adhesion and good curing qualities wit...展开 Reactive Polyamide Resin 650B is widely used in epoxy glue, antisepsis coatings and anti rust paint. It is a light yellow transparent thick liquid which can be used as an anti-corrosion coating. This product also has adhesion and good curing qualities with an excellent resistance to impact. 收起
SCA-Y25E Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 SCA-Y25E (3-Isocyanatopropyltriethoxysilane) is unique isocyanate functional silane.The isocyanate functionality exhibits the typical reactivity of an alkyl isocyanate and will react with most reactive hydrogen containing compounds.The silane portion of t...展开 SCA-Y25E (3-Isocyanatopropyltriethoxysilane) is unique isocyanate functional silane.The isocyanate functionality exhibits the typical reactivity of an alkyl isocyanate and will react with most reactive hydrogen containing compounds.The silane portion of these products can then crosslink with each other or be used to adhere to a variety of substrates. SCA-Y25E can be used in a number of applications. 收起
SCA-Y25M Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 SCA-Y25M (3-Isocyanatopropyltrimethoxysilane) is a unique isocyanate functional silane.The isocyanate functionality exhibits the typical reactivity of an alkyl isocyanate and will react with most reactive hydrogen containing compounds.The silane portion o...展开 SCA-Y25M (3-Isocyanatopropyltrimethoxysilane) is a unique isocyanate functional silane.The isocyanate functionality exhibits the typical reactivity of an alkyl isocyanate and will react with most reactive hydrogen containing compounds.The silane portion of these products can then crosslink with each other or be used to adhere to a variety of substrates. It can be used in a number of applications. 收起
SILICONE FLUID ATPN-100 Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 SILICONE FLUID ATPN-100 is a linear, non-reactive polydimethylsiloxane with a viscosity of approx. 100 mm2 /s. Due to its chemical structure, it has an outstanding property profile, which sets it apart from organic materials such as mineral oils. SILICON...展开 SILICONE FLUID ATPN-100 is a linear, non-reactive polydimethylsiloxane with a viscosity of approx. 100 mm2 /s. Due to its chemical structure, it has an outstanding property profile, which sets it apart from organic materials such as mineral oils. SILICONE FLUID ATPN-100 is ideal for use in a wide range of applications. 收起
SILICONE FLUID ATPN-1000 Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 SILICONE FLUID ATPN-1000 is a linear, non-reactive polydimethylsiloxane with a viscosity of approx. 1 000 mm2/s. Due to its chemical structure, it has an outstanding property profile, which sets it apart from organic materials such as mineral oils. SILICO...展开 SILICONE FLUID ATPN-1000 is a linear, non-reactive polydimethylsiloxane with a viscosity of approx. 1 000 mm2/s. Due to its chemical structure, it has an outstanding property profile, which sets it apart from organic materials such as mineral oils. SILICONE FLUID ATPN-1000 is ideal for use in a wide range of applications. 收起
SandGel B Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 SandGel B, a selectively mined, water-washed, ultrafine crushed and surface modified product, has a high swelling capacity in water and shows a marked thixotropic thickening effect. SandGel B, is supplied as a white powder with optimize purity, whiteness ...展开 SandGel B, a selectively mined, water-washed, ultrafine crushed and surface modified product, has a high swelling capacity in water and shows a marked thixotropic thickening effect. SandGel B, is supplied as a white powder with optimize purity, whiteness and is stable in diluted acids and bases and is particularly effective in acidic, neutral and alkaline systems. 收起
SandGel BL Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 SandGel BL, a selectively mined, specially processed and water-washed smectite product, has a high swelling capacity in water and shows a marked thixotropic thickening effect. SandGel BL, is supplied as a white powder with optimize purity, whiteness and i...展开 SandGel BL, a selectively mined, specially processed and water-washed smectite product, has a high swelling capacity in water and shows a marked thixotropic thickening effect. SandGel BL, is supplied as a white powder with optimize purity, whiteness and is stable in diluted acids and bases and is particularly effective in acidic, neutral and alkaline systems. 收起
SandGel BN Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 SandGel BN, a selectively mined, water-washed, ultrafine crushed and surface modified product, has a high swelling capacity in water and shows a marked thixotropic thickening effect. SandGel BN, disperses easily and hydrates rapidly, has superior suspensi...展开 SandGel BN, a selectively mined, water-washed, ultrafine crushed and surface modified product, has a high swelling capacity in water and shows a marked thixotropic thickening effect. SandGel BN, disperses easily and hydrates rapidly, has superior suspension and thixotropy, can be added as powder or blend with other ingredient in aqueous system. 收起
SandGel C Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 SandGel C, a selectively mined, water-washed, ultrafine crushed and surface modified product, has a high swelling capacity in water and shows a marked thixotropic thickening effect. SandGel C, is cellulose modified product, and has excellent anti electrol...展开 SandGel C, a selectively mined, water-washed, ultrafine crushed and surface modified product, has a high swelling capacity in water and shows a marked thixotropic thickening effect. SandGel C, is cellulose modified product, and has excellent anti electrolyte performance, water-retaining property and rheological property, can be used as thickener, thixotropy, suspending agent, adhesive, latex stabilizer, etc. 收起
SandGel HL Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 SandGel HL, a selectively mined, specially processed and water-washed smectite product, has a high swelling capacity in water and shows a marked thixotropic thickening effect. SandGel HL, has higher viscosity in low solid content and superior thixotropy, ...展开 SandGel HL, a selectively mined, specially processed and water-washed smectite product, has a high swelling capacity in water and shows a marked thixotropic thickening effect. SandGel HL, has higher viscosity in low solid content and superior thixotropy, can be used as thickener, thixotropy, suspending agent, adhesive, latex stabilizer, etc. It has the value to improve the storage stability, workability, and to prevent subsidence and drainage phenomenon. 收起
Silane ATPN-1100 Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Silane ATPN-1100 is a versatile amino-functional coupling agent used over a broad range of applications to provide superior bonds between inorganic substrates and organic polymers. The silicon-containing portion of the molecule provides strong bonding to ...展开 Silane ATPN-1100 is a versatile amino-functional coupling agent used over a broad range of applications to provide superior bonds between inorganic substrates and organic polymers. The silicon-containing portion of the molecule provides strong bonding to substrates. The primary amine function reacts with a wide array of thermoset, thermoplastic, and elastomeric materials. 收起
Silane ATPN-1110 Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Silane ATPN-1110 is an amino-functional silane that may be used over a broad range of applications to give an improvement in the bond between a substrate, filler or reinforcement and resins that react with the amino group. It can improve the dispersion an...展开 Silane ATPN-1110 is an amino-functional silane that may be used over a broad range of applications to give an improvement in the bond between a substrate, filler or reinforcement and resins that react with the amino group. It can improve the dispersion and wet ability of filler in the high molecular materials. ATPN-1110 is an excellent promoter of adhesion and sealant (such as polyurethane, epoxy, and phenol). In the glass wool and FRP products, it can be added into phenol resins to improve the wet resistance and mechanical performance. 收起
Silane ATPN-1120 Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Silane ATPN-1120 is a clear, colorless, strongly alkaline liquid with smell being very sensitive to hydrolysis. The chloride content ranges in the lower ppm-level. ATPN-1120 is used as adhesion promoter at organic/inorganic interfaces, for modification of...展开 Silane ATPN-1120 is a clear, colorless, strongly alkaline liquid with smell being very sensitive to hydrolysis. The chloride content ranges in the lower ppm-level. ATPN-1120 is used as adhesion promoter at organic/inorganic interfaces, for modification of surfaces (corrosion prevention, component of primers) or silicone-polymers or as crosslinker (moisture crosslinking of polymers). The application as“coupling agent”leads in general to an improvement of mechanical and electrical product properties above all under exposure to heat and/or moisture. 收起
Silane ATPN-171 Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Silane ATPN-171 is used to modify polyethylene and other polymers by grafting its vinyl group to the polymer backbone using a radical initiator, such as peroxide. This provides a polymer with pendant trimethoxysilyl groups that may be used as moisture-act...展开 Silane ATPN-171 is used to modify polyethylene and other polymers by grafting its vinyl group to the polymer backbone using a radical initiator, such as peroxide. This provides a polymer with pendant trimethoxysilyl groups that may be used as moisture-activated crosslinking sites via hydrolysis of the alkoxy groups followed by condensation of the resulting silanols. 收起
Silane ATPN-187 Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Silane ATPN-187 is an epoxy-functional silane, it is a clear, light straw liquid. ATPN-187 may used as a coupling agent in polysulfide and polyurethane caulks and sealants, in mineral-filled or glass-reinforced thermosets and thermoplastics, and in glass ...展开 Silane ATPN-187 is an epoxy-functional silane, it is a clear, light straw liquid. ATPN-187 may used as a coupling agent in polysulfide and polyurethane caulks and sealants, in mineral-filled or glass-reinforced thermosets and thermoplastics, and in glass roving size-binders. It is particularly employed as an adhesion-promoting additive in waterborne systems, e.g. improving the adhesion of acrylic latex sealants. 收起
Silane Coupling Agent Si-69 Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Silane Coupling Agent Si-69 is a kind of multifunctional silane coupling agent that has been used successfully in the rubber industry. It is used to improve physical and mechanical properties of vulcanizates. It is able to markedly improve tensile strengt...展开 Silane Coupling Agent Si-69 is a kind of multifunctional silane coupling agent that has been used successfully in the rubber industry. It is used to improve physical and mechanical properties of vulcanizates. It is able to markedly improve tensile strength, tearing strength and abrasive resistance and reduce compression set of vulcanizates. In addition, it can reduce the viscosity and improve the processability of rubber products. Si-69 is especially suitable to improve the reinforcing properties of fillers that contain hydroxyl groups in all unsaturated polymers having double bonds or their blends. 收起
Silver Coated Copper Powder Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Silver Coated Copper Powder has Good electrical conductivity, high electrical conductivity and it is not easy to be oxidized, it is a promising good conductive material. It is a good conductive material, it is widely used in the electronic, electromechani...展开 Silver Coated Copper Powder has Good electrical conductivity, high electrical conductivity and it is not easy to be oxidized, it is a promising good conductive material. It is a good conductive material, it is widely used in the electronic, electromechanical, communication, printing, aerospace, etc. 收起
Sulfolane Anhydrous Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Sulfolane is a colorless and tasteless solid at room temperature, melted at 27.8℃. Most industrial products are colorless and light yellow liquid. Sulfolane has high solubility property and selectivity. It is soluble in water and easily soluble in aromati...展开 Sulfolane is a colorless and tasteless solid at room temperature, melted at 27.8℃. Most industrial products are colorless and light yellow liquid. Sulfolane has high solubility property and selectivity. It is soluble in water and easily soluble in aromatics and alcohol, but has little solubility in paraffin and olefin hydrocarbon. Sulfolane has high stability with hot acid and alkali. It doesn’t react with acid, alkali, sulfur, oralcohol at room temperature, and also doesn’t decompose and polymerize. When the temperature is higher than 240℃, the sulfolane will decompose SO2. Sulfolane has stable chemical property, it will not appear polyreaction and decomposition under common condition with the existence of acid and alkali. 收起
Sulfolane Aqueous Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Sulfolane is a colorless and tasteless solid at room temperature, melted at 27.8℃. Most industrial products are colorless and light yellow liquid. Sulfolane has high solubility property and selectivity. It is soluble in water and easily soluble in aromati...展开 Sulfolane is a colorless and tasteless solid at room temperature, melted at 27.8℃. Most industrial products are colorless and light yellow liquid. Sulfolane has high solubility property and selectivity. It is soluble in water and easily soluble in aromatics and alcohol, but has little solubility in paraffin and olefin hydrocarbon. Sulfolane has high stability with hot acid and alkali. It doesn’t react with acid, alkali, sulfur, oralcohol at room temperature, and also doesn’t decompose and polymerize. When the temperature is higher than 240℃, the sulfolane will decompose SO2. Sulfolane has stable chemical property, it will not appear polyreaction and decomposition under common condition with the existence of acid and alkali. 收起
UVB2000 Special Tertiary Amine Acrylate Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 UVB2000 Special Tertiary Amine Acrylate is a difunctional amine coinitiator which, when used in conjunction with a photosensitizer such as benzophenone, promotes rapid curing under UV light. Additional benefits include reduced odors, both at press side an...展开 UVB2000 Special Tertiary Amine Acrylate is a difunctional amine coinitiator which, when used in conjunction with a photosensitizer such as benzophenone, promotes rapid curing under UV light. Additional benefits include reduced odors, both at press side and in the cured film, and reduced blooming. It is ideal for use in a wide range of applications. 收起
UVB2200 Reactive Amine Acrylate Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 UVB2200 Reactive Amine Acrylate is a very low viscosity, highly reactive amine modified polyetheracrylate oligomer for use in UV and EB curing systems. UVB2200 can be used as the sole binder or with monomer diluents. It is ideal for use in a wide range of...展开 UVB2200 Reactive Amine Acrylate is a very low viscosity, highly reactive amine modified polyetheracrylate oligomer for use in UV and EB curing systems. UVB2200 can be used as the sole binder or with monomer diluents. It is ideal for use in a wide range of applications. 收起
UVE3216 Modified Epoxy Acrylate Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 UVE3216 Modified Epoxy Acrylate is a high molecular weight, acid modified epoxy acrylate. It blended with 10% tripropylene glycol diacrylate. It allows high gloss, fast cure response, higher flexibility and low shrikage. UVE3216 is ideal for use in a wide...展开 UVE3216 Modified Epoxy Acrylate is a high molecular weight, acid modified epoxy acrylate. It blended with 10% tripropylene glycol diacrylate. It allows high gloss, fast cure response, higher flexibility and low shrikage. UVE3216 is ideal for use in a wide range of applications. 收起
UVU 6451 Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 UVU 6451 is a tetrafunctional aliphatic urethane acrylate oligomer developed for UV/EB-cured coatings and inks. It imparts hardness, very fast cure response, and non-yellowing characteristics to these applications.
UVU6219 Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 UVU6219 is an aliphatic polyester based urethane diacrylate oligomer blended with 20% TPGDA, tripropylene glycol diacrylate. It is a flexible oligomer offering good weatherability, and low skin irritation. UVU6219 is ideal for use in a wide range of appli...展开 UVU6219 is an aliphatic polyester based urethane diacrylate oligomer blended with 20% TPGDA, tripropylene glycol diacrylate. It is a flexible oligomer offering good weatherability, and low skin irritation. UVU6219 is ideal for use in a wide range of applications. 收起
UVU6305 Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 UVU6305 is a trifunctional aliphatic polyester urethane acrylate oligomer developed for use in UV and EB cured inks and coatings. Weatherability, low viscosity, and fast cure are among the key attributes of UVU6305. It is ideal for use in a wide range of ...展开 UVU6305 is a trifunctional aliphatic polyester urethane acrylate oligomer developed for use in UV and EB cured inks and coatings. Weatherability, low viscosity, and fast cure are among the key attributes of UVU6305. It is ideal for use in a wide range of applications. 收起
UVU6609 Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 UVU6609 is a hexafunctional aliphatic urethane acrylate oligomer. It offers low viscosity and good abrasion and heat resistance. UVU6609 is ideal for use in a wide range of applications.
UVU6906 Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 UVU6906 is a multifunctional urethane acrylate oligomer that imparts chemical resistance, fast cure response, weatherability, and abrasion resistance to radiation-cure coatings. It is ideal for use in a wide range of applications.