| 133 Resin | Guangzhou Baohui Resin Co., Ltd. | 133 Resin is a resin synthesized from chloride acetate and nitrocotton. This clear, transparent liquid has arrangement properties in electroplated silver, and provides toughness, corrosion resistance, strong viscosity, and plasticity to paints and photogr...展开 133 Resin is a resin synthesized from chloride acetate and nitrocotton. This clear, transparent liquid has arrangement properties in electroplated silver, and provides toughness, corrosion resistance, strong viscosity, and plasticity to paints and photogravure inks. 收起 | |
| 161A | Guangzhou Baohui Resin Co., Ltd. | 161A is a thermoplastic acrylic resin appearing as a clear, viscous liquid. It has alcohol resistance, wear resistance, harness and handfeel, and is capable of polyurethane and ultraviolet finishing. Functioning to make aluminum silver paste uniform on co...展开 161A is a thermoplastic acrylic resin appearing as a clear, viscous liquid. It has alcohol resistance, wear resistance, harness and handfeel, and is capable of polyurethane and ultraviolet finishing. Functioning to make aluminum silver paste uniform on coatings, 161A also provides an electroplated effect on coatings. 收起 | |
| 179A | Guangzhou Baohui Resin Co., Ltd. | 179A is a thermoplastic acrylic resin appearing as a clear, viscous liquid. It is resistant to high temperatures, does not yellow, and provides an electroplated effect through the use of silver paste. 179A is commonly used in the surface coating of automo...展开 179A is a thermoplastic acrylic resin appearing as a clear, viscous liquid. It is resistant to high temperatures, does not yellow, and provides an electroplated effect through the use of silver paste. 179A is commonly used in the surface coating of automobiles, motorcycles, and other metal products. 收起 | |
| 6400-7D | Guangzhou Baohui Resin Co., Ltd. | 6400-7D is an acrylic acid resin appearing as a clear, transparent liquid. It increases the strength of paint membranes based on various energies produced by UV conduction and solidification. 6400-7D is most commonly used to reduce the solidification of U...展开 6400-7D is an acrylic acid resin appearing as a clear, transparent liquid. It increases the strength of paint membranes based on various energies produced by UV conduction and solidification. 6400-7D is most commonly used to reduce the solidification of UV concentration in the presence of high energy and present cracking in thick membranes. 收起 | |
| 75-62S Acrylic Resin | Guangzhou Baohui Resin Co., Ltd. | 75-62S Acrylic Resin is a light-cured primer thermoplastic acrylic resin appearing as a clear, transparent liquid. Featuring compatibility with nitrocotton and cellulose acetate, 75-62S Acrylic Resin adheres to UV light-cured paint films to provide resist...展开 75-62S Acrylic Resin is a light-cured primer thermoplastic acrylic resin appearing as a clear, transparent liquid. Featuring compatibility with nitrocotton and cellulose acetate, 75-62S Acrylic Resin adheres to UV light-cured paint films to provide resistance to water boning and high temperatures when used with UV. 收起 | |
| 75-66S | Guangzhou Baohui Resin Co., Ltd. | 75-66S is a thermoplastic acrylic resin appearing as a clear, transparent liquid. Featuring intermiscibility with nitrocotton and butyl acetate fiber, it is used as an additive in self-drying acrylic resin paints. The basic paint film produced has gloss, ...展开 75-66S is a thermoplastic acrylic resin appearing as a clear, transparent liquid. Featuring intermiscibility with nitrocotton and butyl acetate fiber, it is used as an additive in self-drying acrylic resin paints. The basic paint film produced has gloss, adhesion, chemical resistance, and a silver powder arrangement effect. 62-66S also provides water, humidity, and heat resistance. 收起 | |
| BH-113 UV Resin | Guangzhou Baohui Resin Co., Ltd. | BH-113 UV Resin is a modified urethane acrylate of the middle functional group. This clear, transparent liquid can enhance the adhesion to metal and vacuum electroplating surface, improve the leveling status, and eliminate the spot and pinhole of coatings...展开 BH-113 UV Resin is a modified urethane acrylate of the middle functional group. This clear, transparent liquid can enhance the adhesion to metal and vacuum electroplating surface, improve the leveling status, and eliminate the spot and pinhole of coatings. BH-113 UV Resin enhances coating surface cleanness and humid packaging performance of pigments, and water boiling resistance of coatings. 收起 | |
| BH-1300 | Guangzhou Baohui Resin Co., Ltd. | BH-1300 is a modified resin synthesized from chloride acetate and nitrocotton. Appearing as a clear liquid, features include high toughness, corrosion resistance, strong viscosity, and high plasticity. BH-1300 finds application in paints for electrosilver...展开 BH-1300 is a modified resin synthesized from chloride acetate and nitrocotton. Appearing as a clear liquid, features include high toughness, corrosion resistance, strong viscosity, and high plasticity. BH-1300 finds application in paints for electrosilvering top coats, and photogravure inks. 收起 | |
| BH-2300 | Guangzhou Baohui Resin Co., Ltd. | BH-2300 is a modified acrylic resin appearing as a light yellow liquid. The surface of the paint membrane has photo mask effect, anti-alcohol, excellent laser carving effect and layer density. It can be used as UV primer and compatible to the anti-falling...展开 BH-2300 is a modified acrylic resin appearing as a light yellow liquid. The surface of the paint membrane has photo mask effect, anti-alcohol, excellent laser carving effect and layer density. It can be used as UV primer and compatible to the anti-falling auxiliary. BH-2300 is commonly used in the formulation of coatings requiring an electroplating effect. 收起 | |
| BH-233 | Guangzhou Baohui Resin Co., Ltd. | BH-233 is a mixture of modified acrylic acid resin and solvent appearing as a light yellow liquid. It provides a photo mask effect, laser carving effect, and layer density to the surface of paint membranes. BH-233 can be used as a UV primer and is suitabl...展开 BH-233 is a mixture of modified acrylic acid resin and solvent appearing as a light yellow liquid. It provides a photo mask effect, laser carving effect, and layer density to the surface of paint membranes. BH-233 can be used as a UV primer and is suitable for the formulation of electroplating effects in coatings. 收起 | |
| BH-533 | Guangzhou Baohui Resin Co., Ltd. | BH-533 is a dual-function PUA resin with weathering resistance and flexibility. This clear, transparent liquid has resistance to yellowing, and high and low temperature and thermal cycling performance. BH-533 finds application in UV plastic coatings. | |
| BH-6200-3G | Guangzhou Baohui Resin Co., Ltd. | BH-6200-3G is a polyurethane acrylic acid oligomer with comprehensive performance. This clear, transparent liquid provides leveling and waterproof properties, and RCA resistance. It is commonly applied to laptop UV, shells of mobile phones, and key-press ...展开 BH-6200-3G is a polyurethane acrylic acid oligomer with comprehensive performance. This clear, transparent liquid provides leveling and waterproof properties, and RCA resistance. It is commonly applied to laptop UV, shells of mobile phones, and key-press UV to overcome whitening, pinhole and sagging problems in thick coatings. 6200-3G finds application in NB UV plastic paint and mobile UV plastic paints. 收起 | |
| BH-66 UV Resin | Guangzhou Baohui Resin Co., Ltd. | BH-66 UV Resin is a modified polyester acrylate featuring UV radiation solidification performance. This clear, transparent liquid functions as a UV resin and enhances the light solidification speed rate in printing ink systems, reduces the consumption qua...展开 BH-66 UV Resin is a modified polyester acrylate featuring UV radiation solidification performance. This clear, transparent liquid functions as a UV resin and enhances the light solidification speed rate in printing ink systems, reduces the consumption quantity of the photo initiator, and enhances the proportion of formula middle pigment and filling. BH-66 has adhesion force, hardness, and bruise resistance performance. It can be used in bruise-resistant coating systems. 收起 | |
| BH-9002 | Guangzhou Baohui Resin Co., Ltd. | BH-9002 is a mirror silver resin appearing as a light yellow powder. Functions include strengthening adhesion, viscosity, rigidness, hardness, and chemical resistance. BH-9002 finds application in coatings requiring waterproof and anti-chemical properties...展开 BH-9002 is a mirror silver resin appearing as a light yellow powder. Functions include strengthening adhesion, viscosity, rigidness, hardness, and chemical resistance. BH-9002 finds application in coatings requiring waterproof and anti-chemical properties. 收起 | |
| BH368 | Guangzhou Baohui Resin Co., Ltd. | BH368 is an acrylic polyester resin appearing as a transparent liquid. This product does not yellow, provides flexibility, and finds application in varnish finishes of ultraviolet ray solidification and printing inks. | |
| BH382 | Guangzhou Baohui Resin Co., Ltd. | BH382 is a UV resin appearing as a transparent liquid. This product is commonly used for the preparation of ultraviolet solidification wood coatings of half matt, matt, or full matt. BH382 also finds application as varnish for UV curing and printing inks. | |
| DPHA-4056 | Guangzhou Baohui Resin Co., Ltd. | DPHA-4056 is a UV monomer appearing as a transparent, light yellow liquid. Featuring fast solidification, high hardness, bruise resistance, and low stimulation, DPHA-4056 finds application in coatings, printing inks, varnish paints, and adhesives. | |
| Electrosilvering Resin 9001 | Guangzhou Baohui Resin Co., Ltd. | Electrosilvering Resin 9001 is a mirror silver resin appearing as a white solid. It features high viscosity, anti-corrosion, and strong pasting and plasticity. Electrosilvering Resin 9001 is compatible in other coating resins and is dispersible in organic...展开 Electrosilvering Resin 9001 is a mirror silver resin appearing as a white solid. It features high viscosity, anti-corrosion, and strong pasting and plasticity. Electrosilvering Resin 9001 is compatible in other coating resins and is dispersible in organic pigments. It finds application in paints and photo printing inks. 收起 | |
| EMULTEX™ FR 728 | Synthomer | EMULTEX™ FR 728 is a specially colloid stabilised vinyl acetate - vinyl versatate copolymer dispersion developed for formulation of water-borne intumescent coatings. EMULTEX™ FR 728 provides a quick char formation with high expansion factor. EMULTEX™ FR 7...展开 EMULTEX™ FR 728 is a specially colloid stabilised vinyl acetate - vinyl versatate copolymer dispersion developed for formulation of water-borne intumescent coatings. EMULTEX™ FR 728 provides a quick char formation with high expansion factor. EMULTEX™ FR 728 is designed for intumescent coatings for fire protection up to R60. 收起 | |
| EMULTEX™ FR 797 | Synthomer | EMULTEX™ FR 797 is a specially colloid stabilised and vinyl acetate - vinyl versatate copolymer dispersion developed for formulation of waterborne intumescent coatings. EMULTEX™ FR 797 provides a slow char formation with medium expansion factor. EMULTEX™ ...展开 EMULTEX™ FR 797 is a specially colloid stabilised and vinyl acetate - vinyl versatate copolymer dispersion developed for formulation of waterborne intumescent coatings. EMULTEX™ FR 797 provides a slow char formation with medium expansion factor. EMULTEX™ FR 797 is recommended for intumescent coatings with fire protection up to 120min. 收起 | |
| EMULTEX™ VV 676 | Synthomer | EMULTEX™ VV 676 is a medium particle size, colloid stabilized aqueous dispersion of a vinyl acetate - vinyl versatate - acrylate copolymer. EMULTEX™ VV 676 offers high scrub resistance, high exterior durabillity and good low temperature film forming prope...展开 EMULTEX™ VV 676 is a medium particle size, colloid stabilized aqueous dispersion of a vinyl acetate - vinyl versatate - acrylate copolymer. EMULTEX™ VV 676 offers high scrub resistance, high exterior durabillity and good low temperature film forming properties. EMULTEX™ VV 676 is recommended for a broad range of interior and exterior masonry coatings. 收起 | |
| EMULTEX™ VV 679 | Synthomer | EMULTEX™ VV 679 is a medium particle size, colloid stabilised vinyl acetate - vinyl versatate copolymer dispersion. EMULTEX™ VV 679 offers high scrub resistance and high gloss. EMULTEX™ VV 679 is recommended for matt and silk wall paints and also can be u...展开 EMULTEX™ VV 679 is a medium particle size, colloid stabilised vinyl acetate - vinyl versatate copolymer dispersion. EMULTEX™ VV 679 offers high scrub resistance and high gloss. EMULTEX™ VV 679 is recommended for matt and silk wall paints and also can be used in ready mixed fillers and ceramic tile adhesives. 收起 | |
| High-Bright PU C701 | Guangzhou Baohui Resin Co., Ltd. | High-Bright PU C701 is a wear-resistant polyurethane resin. It enhances the luster and richness in polyurethane, has wettability with pigments, and is compatible with hydroxyl acrylic acid. This product is commonly applied to high-grade polyurethane coati...展开 High-Bright PU C701 is a wear-resistant polyurethane resin. It enhances the luster and richness in polyurethane, has wettability with pigments, and is compatible with hydroxyl acrylic acid. This product is commonly applied to high-grade polyurethane coatings. 收起 | |
| HYDRO PLIOLITE™ 050 | Synthomer | HYDRO PLIOLITE™ 050 is an acrylate copolymer based on our ABS (Amphoteric Binding System) technology, contains anionic and cationic groups. Blocks many stains, including tannin, marker, and water stains. HYDRO PLIOLITE™ 050 water-based resin was designed ...展开 HYDRO PLIOLITE™ 050 is an acrylate copolymer based on our ABS (Amphoteric Binding System) technology, contains anionic and cationic groups. Blocks many stains, including tannin, marker, and water stains. HYDRO PLIOLITE™ 050 water-based resin was designed for low VOC stain blocking primers. 收起 | |
| HYDRO PLIOLITE™ 211 | Synthomer | HYDRO PLIOLITE™ 211 is a modified styrene-acrylic copolymer dispersion developed for formulation of water-borne intumescent coatings. HYDRO PLIOLITE™ 211 has excellent water resitance that allows intumescent coatings to resist to outdoor conditions. HYDRO...展开 HYDRO PLIOLITE™ 211 is a modified styrene-acrylic copolymer dispersion developed for formulation of water-borne intumescent coatings. HYDRO PLIOLITE™ 211 has excellent water resitance that allows intumescent coatings to resist to outdoor conditions. HYDRO PLIOLITE™ 211 is designed for intumescent coatings for fire protection from R30 to R120. 收起 | |
| HYDRO PLIOLITE™ 330 | Synthomer | HYDRO PLIOLITE™ 330 is a multiphase pure acrylic copolymer dispersion designed for application on wood. HYDRO PLIOLITE™ 330 provides an excellent adhesion and enhanced film formation in adverse climatic conditions that allows formulation of weather- and s...展开 HYDRO PLIOLITE™ 330 is a multiphase pure acrylic copolymer dispersion designed for application on wood. HYDRO PLIOLITE™ 330 provides an excellent adhesion and enhanced film formation in adverse climatic conditions that allows formulation of weather- and surface-tolerant wood coatings. HYDRO PLIOLITE™ 330 is suitable for formulation of wood stains and wood trim paints. 收起 | |
| Hydroxyl Acrylic Resin BH655 | Guangzhou Baohui Resin Co., Ltd. | Hydroxyl Acrylic Resin BH655 is a water-resistant polyurethane resin. It improves the arrangement of aluminum powder, compatibility to cellulose acetate-butyrate and alcohol resistance, and wearing and solvent resistance. This product is commonly used in...展开 Hydroxyl Acrylic Resin BH655 is a water-resistant polyurethane resin. It improves the arrangement of aluminum powder, compatibility to cellulose acetate-butyrate and alcohol resistance, and wearing and solvent resistance. This product is commonly used in coatings and aluminum powder paints. 收起 | |
| K-636 | Guangzhou Baohui Resin Co., Ltd. | K-636 is an aliphatic, tetra-functional polyurethane resin appearing as a clear liquid. This product provides adhesion, and is commonly used in UV vacuum plating primers. | |
| KF-666 | Guangzhou Baohui Resin Co., Ltd. | KF-666 is a polyurethane acrylate resin appearing as a clear liquid. It features high curing speed and hardness, and solvent resistance. KF-666 finds application in vacuum electroplating finishes and polished finishes with high adhesion requirements. | |
| LIPATON™ SB 5521 | Synthomer | LIPATON™ SB 5521 is a finely dispersed aqueous dispersion of a carboxylated styrene-butadiene copolymer. The dispersion contains an anionic emulsifier system and is free from film forming aids, APEO, solvents and plasticizers. LIPATON™ SB 5521 is a hydrop...展开 LIPATON™ SB 5521 is a finely dispersed aqueous dispersion of a carboxylated styrene-butadiene copolymer. The dispersion contains an anionic emulsifier system and is free from film forming aids, APEO, solvents and plasticizers. LIPATON™ SB 5521 is a hydrophobic and elastic polymer. It is highly recommended for anti-corrosive primers and underbody coatings. 收起 | |
| LYTRON™ 180 AV | Synthomer | LYTRON™ 180 AV is an acidic un-neutralized opacifier for home and personal care products with no added preservatives. LYTRON™ 180 AV styrene acrylic copolymer opacifier for bath and shower products, including liquid hand wash and soaps, laundry detergents...展开 LYTRON™ 180 AV is an acidic un-neutralized opacifier for home and personal care products with no added preservatives. LYTRON™ 180 AV styrene acrylic copolymer opacifier for bath and shower products, including liquid hand wash and soaps, laundry detergents, and cleaners. 收起 | |
| MOR-GLO™ 10 | Synthomer | MOR-GLO™ 10 is a floor finish, water-based styrene acrylic, polymer emulsion for ultra-high speed (UHS) maintenance program. MOR-GLO™ 10 provides a very repairable surface that has a high distinctness of image without compromising the abrasion, soil and s...展开 MOR-GLO™ 10 is a floor finish, water-based styrene acrylic, polymer emulsion for ultra-high speed (UHS) maintenance program. MOR-GLO™ 10 provides a very repairable surface that has a high distinctness of image without compromising the abrasion, soil and shoe scuff resistance associated with high performance floor finishes. 收起 | |
| MOR-GLO™ 2 | Synthomer | MOR-GLO™ 2 is a floor finish, water-based styrene acrylic, polymer emulsion for high traffic applications, such as schools, hospitals and retail. MOR-GLO™ 2 very hard and durable zinc crosslinked polymer provides premium performance in high traffic floor ...展开 MOR-GLO™ 2 is a floor finish, water-based styrene acrylic, polymer emulsion for high traffic applications, such as schools, hospitals and retail. MOR-GLO™ 2 very hard and durable zinc crosslinked polymer provides premium performance in high traffic floor areas. It features excellent black heel mark (BHMR), scuff and dirt resistance. 收起 | |
| MOR-GLO™ 2E | Synthomer | Mor-Glo 2E very hard and durable zinc crosslinked polymer provides premium performance in high traffic floor areas. It features excellent black heel mark (BHMR), scuff and dirt resistance. | |
| MOR-GLO™ 8 | Synthomer | MOR-GLO™ 8 is a floor finish, water-based styrene acrylic, polymer emulsion for high traffic applications, such as schools, hospitals and retail. MOR-GLO™ 8 zinc crosslinked floor finish polymer is used to make premium, well-balanced floor polishes that p...展开 MOR-GLO™ 8 is a floor finish, water-based styrene acrylic, polymer emulsion for high traffic applications, such as schools, hospitals and retail. MOR-GLO™ 8 zinc crosslinked floor finish polymer is used to make premium, well-balanced floor polishes that provide outstanding dirt resistance, reparability, and response to periodic ultra high speed maintenance. 收起 | |
| MOR-GLO™ 877 | Synthomer | MOR-GLO™ 877 is a floor finish, water-based styrene acrylic, polymer emulsion for industrial, residential and general purpose polishes with good wear resistance. MOR-GLO™ 877 general use polymer is frequently recommended for low maintenance floor finishes...展开 MOR-GLO™ 877 is a floor finish, water-based styrene acrylic, polymer emulsion for industrial, residential and general purpose polishes with good wear resistance. MOR-GLO™ 877 general use polymer is frequently recommended for low maintenance floor finishes. It can be used as sole polymer or blended with others. 收起 | |
| MOR-GLO™ G128 | Synthomer | MOR-GLO™ G128 is a zinc-free floor finish, water-based styrene acrylic, polymer emulsion for high traffic applications, such as schools, hospitals and retail. MOR-GLO™ G128 is recommended for low maintenance floor finishes. It can be easily formulated int...展开 MOR-GLO™ G128 is a zinc-free floor finish, water-based styrene acrylic, polymer emulsion for high traffic applications, such as schools, hospitals and retail. MOR-GLO™ G128 is recommended for low maintenance floor finishes. It can be easily formulated into EPA Safer Choice, Green Seal and Ecologo certifiable floor finishes. 收起 | |
| MOR-GLO™ ULTRA AR | Synthomer | MOR-GLO™ ULTRA AR is an alcohol resistant floor finish, water-based styrene acrylic, polymer emulsion for high traffic environments. MOR-GLO™ ULTRA AR provides a very durable, high gloss surface that is resistant to alcohol based hand sanitizers but that ...展开 MOR-GLO™ ULTRA AR is an alcohol resistant floor finish, water-based styrene acrylic, polymer emulsion for high traffic environments. MOR-GLO™ ULTRA AR provides a very durable, high gloss surface that is resistant to alcohol based hand sanitizers but that still retains the reparability and removability of one-component floor finish. 收起 | |
| MOR-GLO™ ULTRA G | Synthomer | MOR-GLO™ ULTRA G is a zinc-free Twin-Linked™, water-based styrene acrylic, polymer emulsion for low or high maintenance floor polish formulations. MOR-GLO™ ULTRA G zinc-free polymer delivers the durability and performance of premium zinc-containing finish...展开 MOR-GLO™ ULTRA G is a zinc-free Twin-Linked™, water-based styrene acrylic, polymer emulsion for low or high maintenance floor polish formulations. MOR-GLO™ ULTRA G zinc-free polymer delivers the durability and performance of premium zinc-containing finishes. It is crosslinked using SYNTHOMER Solutions' Twin-Linked™ technology to deliver premium durability and performance. 收起 | |
| MOR-SHINE™ E | Synthomer | Mor-Shine E is a dry-bright polish concentrate with excellent gloss retention, as well as mar and scratch resistance. Mor-Shine E is used for general purpose finishes that respond to low and high maintenance schedules | |
| PLEXTOL™ A 6474 | Synthomer | PLEXTOL™ A 6474 is an aqueous dispersion of an acrylic copolymer with heterogeneous particle morphology. PLEXTOL™ A 6474 is a binder for exterior and interior clear or pigmented wood coatings. | |
| PLEXTOL™ B 500 | Synthomer | PLEXTOL B 500 is a pure acrylic with an excellent shear and electrolyte stability. It is highly recommended for silicone paints and artist paints. It shows high flexibility and UV-resistance. Aqueous dispersion of a non-ionic stabilized thermoplastic acry...展开 PLEXTOL B 500 is a pure acrylic with an excellent shear and electrolyte stability. It is highly recommended for silicone paints and artist paints. It shows high flexibility and UV-resistance. Aqueous dispersion of a non-ionic stabilized thermoplastic acrylic polymer. The dispersion is free from film forming aids, APEO, solvents and plasticizers. 收起 | |
| PLEXTOL™ D 498 | Synthomer | PLEXTOL™ D 498 is a finely dispersed aqueous dispersion of a methacrylic ester-acrylic ester copolymer. The dispersion contains an anionic emulsifier system and is free from film forming aids, solvents and plasticizers. PLEXTOL™ D 498 is a low MFFT pure a...展开 PLEXTOL™ D 498 is a finely dispersed aqueous dispersion of a methacrylic ester-acrylic ester copolymer. The dispersion contains an anionic emulsifier system and is free from film forming aids, solvents and plasticizers. PLEXTOL™ D 498 is a low MFFT pure acrylic recommended for saponification resistant exterior masonry coatings and renders. It is highly suitable for silicate coatings and renders and shows non-yellowing and excellent UV resistance. 收起 | |
| PLEXTOL™ D 507 | Synthomer | PLEXTOL™ D 507 is a finely dispersed aqueous dispersion of a methacrylic ester-acrylic ester copolymer. The dispersion contains an anionic emulsifier system and is free from film forming aids, solvents, plasticizers and ammonia. PLEXTOL™ D 507 is a pure a...展开 PLEXTOL™ D 507 is a finely dispersed aqueous dispersion of a methacrylic ester-acrylic ester copolymer. The dispersion contains an anionic emulsifier system and is free from film forming aids, solvents, plasticizers and ammonia. PLEXTOL™ D 507 is a pure acrylic recommended for industrial concrete-roof tile coatings. It shows excellent exterior durability and very high resistance against water-whitening and efflorescence. 收起 | |
| PLEXTOL™ D 512 | Synthomer | PLEXTOL™ D 512 is a finely dispersed aqueous dispersion of a methacrylic ester-acrylic ester copolymer. The dispersion contains an anionic emulsifier system and is free from APEOs, film forming aids, solvents and plasticizers. PLEXTOL™ D 512 is a pure acr...展开 PLEXTOL™ D 512 is a finely dispersed aqueous dispersion of a methacrylic ester-acrylic ester copolymer. The dispersion contains an anionic emulsifier system and is free from APEOs, film forming aids, solvents and plasticizers. PLEXTOL™ D 512 is a pure acrylic binder with excellent exterior durability and water-whitening resistance. It shows a good blocking and dirt-pick up resistance. It is recommended for high quality masonry paints including mosaic plasters. It is as well suitable for concrete roof-tile renovation paints. 收起 | |
| PLEXTOL™ D 977 | Synthomer | PLEXTOL™ D 977 is a water-based dispersion of acrylic copolymer designed for Elastomeric coatings, roof and walls. It provides a good balance between mechanical properties and dirt pick-up resistance thanks to the adjusted internal plastification and UV s...展开 PLEXTOL™ D 977 is a water-based dispersion of acrylic copolymer designed for Elastomeric coatings, roof and walls. It provides a good balance between mechanical properties and dirt pick-up resistance thanks to the adjusted internal plastification and UV surface curing system. 收起 | |
| PLEXTOL™ M 625 | Synthomer | PLEXTOL™ M 625 is a finely dispersed aqueous dispersion of a methacrylic ester-acrylic ester copolymer. The dispersion contains an anionic emulsifier system, and is free from APEO, coalescing agents, solvents, and plasticizers. PLEXTOL™ M 625 is a hard pu...展开 PLEXTOL™ M 625 is a finely dispersed aqueous dispersion of a methacrylic ester-acrylic ester copolymer. The dispersion contains an anionic emulsifier system, and is free from APEO, coalescing agents, solvents, and plasticizers. PLEXTOL™ M 625 is a hard pure acrylic with excellent UV-resistance and exterior durability. It is highly recommended for industrial concrete roof-tile and fibre-cement coatings. It shows an outstanding efflorescence and water-whitening resistance. 收起 | |
| PLEXTOL™ R 100 | Synthomer | PLEXTOL™ R 100 is a surfactant stabilised modified - acrylic copolymer dispersion that forms a flexible, tough film of high water resistance. PLEXTOL™ R 100 is recommended for exterior and interior paints. | |
| PLEXTOL™ R 5335 | Synthomer | PLEXTOL™ R 5335 is a fine particle size, surfactant stabilised aqueous acrylic copolymer dispersion. PLEXTOL™ R 5335 offers high gloss, excellent adhesion and high water resistance. PLEXTOL™ R 5335 is recommended for high performance trim paints and wood ...展开 PLEXTOL™ R 5335 is a fine particle size, surfactant stabilised aqueous acrylic copolymer dispersion. PLEXTOL™ R 5335 offers high gloss, excellent adhesion and high water resistance. PLEXTOL™ R 5335 is recommended for high performance trim paints and wood stains. 收起 | |
| PLEXTOL™ R 5441 | Synthomer | PLEXTOL™ R 5441 is a fine particle size, surfactant stabilised aqueous dispersion of a crosslinked methacrylic ester-acrylic ester copolymer. PLEXTOL™ R 5441 offers high gloss, block resistance, wet ahdesion, alkali and water resitance. PLEXTOL™ R 5441 is...展开 PLEXTOL™ R 5441 is a fine particle size, surfactant stabilised aqueous dispersion of a crosslinked methacrylic ester-acrylic ester copolymer. PLEXTOL™ R 5441 offers high gloss, block resistance, wet ahdesion, alkali and water resitance. PLEXTOL™ R 5441 is recommended for low-to-medium build wood stains and semigloss to silky matt wet room coatings. 收起 | |
| PLEXTOL™ R 5512 | Synthomer | Plextol R 5512 is a water-based pure acrylic copolymer dispersion mainly recommended for Crack bridging wall paints and highly flexible roof coatings. Plextol R 5512 provides high flexibility and expceptional water, alkali and dirt pick-up resistance. It ...展开 Plextol R 5512 is a water-based pure acrylic copolymer dispersion mainly recommended for Crack bridging wall paints and highly flexible roof coatings. Plextol R 5512 provides high flexibility and expceptional water, alkali and dirt pick-up resistance. It contributes a good balance between mechanical properties and dirt pick-up resistance thanks to the adjusted internal plastification and UV surface curing system. 收起 | |
| PLEXTOL™ R 5530 | Synthomer | PLEXTOL™ R 5530 is a fine particle size, surfactant stabilised aqueous dispersion of a crosslinked methacrylic ester-acrylic ester copolymer. PLEXTOL™ R 5530 offers good adhesion and salt spray resistance with a very good adhesion to different substrates....展开 PLEXTOL™ R 5530 is a fine particle size, surfactant stabilised aqueous dispersion of a crosslinked methacrylic ester-acrylic ester copolymer. PLEXTOL™ R 5530 offers good adhesion and salt spray resistance with a very good adhesion to different substrates. PLEXTOL™ R 5530 is recommended for anti-corrosion and Direct to Meta applications with excellent salt spray resistance and perfect adhesion to many substrates. PLEXTOL™ R 5530 is suitable also for multi-substrate primer formulations. 收起 | |
| PLEXTOL™ R 815 | Synthomer | PLEXTOL™ R 815 is a fine particle size, surfactant stabilised aqueous dispersion of a methacrylic ester-acrylic ester copolymer. PLEXTOL™ R 815 offers high gloss, block resistance, wet adhesion, alkali and water resistance. PLEXTOL™ R 815 is recommended f...展开 PLEXTOL™ R 815 is a fine particle size, surfactant stabilised aqueous dispersion of a methacrylic ester-acrylic ester copolymer. PLEXTOL™ R 815 offers high gloss, block resistance, wet adhesion, alkali and water resistance. PLEXTOL™ R 815 is recommended for gloss paints, varnishes and stains. 收起 | |
| PLEXTOL™ R 825 D | Synthomer | PLEXTOL R 825 D is a finely dispersed aqueous acrylic copolymer dispersion. The dispersion contains an anionic emulsifier system and is free from APEO, film forming aids, solvents and plasticizers. PLEXTOL R 825 D is a self-crosslinking multiphase acrylic...展开 PLEXTOL R 825 D is a finely dispersed aqueous acrylic copolymer dispersion. The dispersion contains an anionic emulsifier system and is free from APEO, film forming aids, solvents and plasticizers. PLEXTOL R 825 D is a self-crosslinking multiphase acrylic dispersion. It is highly recommended for gloss and trim paints. It offers high gloss potential, excellent wet adhesion and good blocking resistance. 收起 | |
| PLEXTOL™ R 825 N | Synthomer | Plextol R 825 N is a finely dispersed aqueous acrylic copolymer dispersion. The dispersion contains an anionic emulsifier system and is free from APEO, film forming aids, solvents and plasticizers. PLEXTOL R 825 N is a self-crosslinking multiphase acrylic...展开 Plextol R 825 N is a finely dispersed aqueous acrylic copolymer dispersion. The dispersion contains an anionic emulsifier system and is free from APEO, film forming aids, solvents and plasticizers. PLEXTOL R 825 N is a self-crosslinking multiphase acrylic dispersion. It is highly recommended for gloss and trim paints. It offers high gloss potential, excellent wet adhesion and good blocking resistance. 收起 | |
| PLEXTOL™ ULTRAFINE LS 5000 | Synthomer | PLEXTOL ULTRAFINE LS 5000 is an ultra fine particle size, surfactant stabilized aqueous dispersion of a methacrylic ester-acrylic ester and vinyl versatate copolymer with translucent appearance. PLEXTOL ULTRAFINE LS 5000 shows excellent penetration and bi...展开 PLEXTOL ULTRAFINE LS 5000 is an ultra fine particle size, surfactant stabilized aqueous dispersion of a methacrylic ester-acrylic ester and vinyl versatate copolymer with translucent appearance. PLEXTOL ULTRAFINE LS 5000 shows excellent penetration and binding properties especially for surfaces which may be subjected to significant dimensional changes. PLEXTOL ULTRAFINE LS 5000 is recommended for wood stains formulation for interior and exterior application. 收起 | |
| PLEXTOL™ ULTRAFINE PR 3500 | Synthomer | PLEXTOL™ ULTRAFINE PR 3500 is an aqueous dispersion of acrylic copolymer with a very fine particle size. | |
| PLEXTOL™ ULTRAGREEN 3852 | Synthomer | PLEXTOL™ ULTRAGREEN 3852 is an ammonia-free aqueous dispersion of an acrylic copolymer. PLEXTOL™ ULTRAGREEN 3852 is designed for formulating environmentally friendly low odour interior and exterior masonry coatings (façade coatings and synthetic resin pla...展开 PLEXTOL™ ULTRAGREEN 3852 is an ammonia-free aqueous dispersion of an acrylic copolymer. PLEXTOL™ ULTRAGREEN 3852 is designed for formulating environmentally friendly low odour interior and exterior masonry coatings (façade coatings and synthetic resin plasters). 收起 | |
| PLEXTOL™ W 1078 | Synthomer | PLEXTOL™ W 1078 is a multiphase, self-crosslinking acrylic copolymer dispersion designed for interior use for varnish and stain formulations of parquet and furniture. | |
| PLIOCRYL™ 4526 | Synthomer | Pliocryl 4526 is an orthophthalic unsaturated polyester solvent-based resin. Mainly recommended for two-component traffic marking paints, especially pedestrian crossings, parking lots, streets, auxiliary markings. Pliocryl 4526 provides a good balance of ...展开 Pliocryl 4526 is an orthophthalic unsaturated polyester solvent-based resin. Mainly recommended for two-component traffic marking paints, especially pedestrian crossings, parking lots, streets, auxiliary markings. Pliocryl 4526 provides a good balance of flexibility and hardness after curing, as well as weather and abrasion resistances. 收起 | |
| PLIOCRYL™ 4600 | Synthomer | Pliocryl 4600 is a thermoplastic solvent-based styrene-acrylic copolymer. It provides extremely fast drying, high hardness and good water resistance properties. Mainly recommended for traffic marking and floor paints. | |
| PLIOCRYL™ 4660 | Synthomer | Pliocryl 4660 is a thermoplastic solvent-based styrene-acrylic copolymer. It provides fast drying, good mechanical properties and good water resistance. Mainly recommended for swimming pools paints as well as floor and traffic marking paints. | |
| PLIOLITE® AC4 | Synthomer | PLIOLITE® AC4 is a styrene-acrylate copolymer, often used in combination with PLIOLITE® AC80, to form tough abrasion and chemically resistant films that have excellent UV resistance and exterior weathering properties. Solvent based thixotropic resin for l...展开 PLIOLITE® AC4 is a styrene-acrylate copolymer, often used in combination with PLIOLITE® AC80, to form tough abrasion and chemically resistant films that have excellent UV resistance and exterior weathering properties. Solvent based thixotropic resin for low to high textured exterior masonry coatings, primers, anti-corrosion coatings, concrete protection and intumescent coatings. 收起 | |
| PLIOLITE® AC5-G | Synthomer | PLIOLITE® AC5G is a styrene-acrylate copolymer, often used in combination with PLIOLITE® AC80, to form tough abrasion and chemically resistant films that have excellent UV resistance and exterior weathering properties. Solvent based pseudoplastic resin fo...展开 PLIOLITE® AC5G is a styrene-acrylate copolymer, often used in combination with PLIOLITE® AC80, to form tough abrasion and chemically resistant films that have excellent UV resistance and exterior weathering properties. Solvent based pseudoplastic resin for low to high build exterior masonry coatings, primers, anti-corrosion coatings, concrete protection and intumescent coatings. 收起 | |
| PLIOLITE® AC90 | Synthomer | PLIOLITE® AC90 styrene-acrylate copolymer provides excellent water resistence and durability. Its melt rheology and synergy with other intumescent raw materials delivers outstanding char consistency and fire resistance. Newtonian resin for high performanc...展开 PLIOLITE® AC90 styrene-acrylate copolymer provides excellent water resistence and durability. Its melt rheology and synergy with other intumescent raw materials delivers outstanding char consistency and fire resistance. Newtonian resin for high performance intumescent coatings. 收起 | |
| PLIOLITE® LV72 | Synthomer | PLIOLITE® LV 72 is a low viscosity styrene-acrylate copolymer with high pigment binding properties that forms tough, abrasion and alkali resistant films with excellent adhesion to concrete and steel, and with very good water and chemical resistance. Newto...展开 PLIOLITE® LV 72 is a low viscosity styrene-acrylate copolymer with high pigment binding properties that forms tough, abrasion and alkali resistant films with excellent adhesion to concrete and steel, and with very good water and chemical resistance. Newtonian resin giving low viscosity solutions, with very good sprayability, for formulation of swimming pool paints and as a replacement for chlorinated rubber. 收起 | |
| PLIOLITE® VTAC-L | Synthomer | PLIOLITE® VTAC-L is a highly soluble, vinyl toluene-acrylate copolymer that forms tough, durable films with excellent adhesion to concrete and steel, with very good water and chemical resistance. Newtonian resin soluble in mineral spirits, for formulation...展开 PLIOLITE® VTAC-L is a highly soluble, vinyl toluene-acrylate copolymer that forms tough, durable films with excellent adhesion to concrete and steel, with very good water and chemical resistance. Newtonian resin soluble in mineral spirits, for formulation of flat or textured masonry coatings, alkali resistant primers, anticorrosion paints and intumescent coatings. 收起 | |
| PLIOTEC™ 115 | Synthomer | PLIOTEC™ 115 is a vinyl-acetate resin with excellent adhesion to polyurethane foam and other substrates. It imparts fast drying and ease of application to intumescent coatings used on non-metallic substrates. Water-borne resin for intumescent coatings for...展开 PLIOTEC™ 115 is a vinyl-acetate resin with excellent adhesion to polyurethane foam and other substrates. It imparts fast drying and ease of application to intumescent coatings used on non-metallic substrates. Water-borne resin for intumescent coatings for PU foams. 收起 | |
| PLIOTEC® 7104E | Synthomer | Pliotec 7104E is high Tg styrene acrylic latex that provides excellent adhesion to concrete and resistance to chemicals. It allows formulation of floor coatings that exhibits superior resistance to abrasion and hot tire pick-up. Pliotec 7104E can be used ...展开 Pliotec 7104E is high Tg styrene acrylic latex that provides excellent adhesion to concrete and resistance to chemicals. It allows formulation of floor coatings that exhibits superior resistance to abrasion and hot tire pick-up. Pliotec 7104E can be used to formulate garage floor coatings, masonry primers and waterproofing sealers. 收起 | |
| PLIOTEC® CR30 | Synthomer | PLIOTEC® CR30 self-crosslinking styrene acrylic latex provides excellent chemical resistance, and is suitable for low VOC concrete floor paints. Water-based self-crosslinking resin for garage, basement and laundry room floor paints. | |
| PLIOTEC® CR78 | Synthomer | PLIOTEC® CR78 self-crosslinking styrene acrylic latex provides excellent chemical resistance, and superior hot-tire pick-up resistance, suitable for low VOC garage floor paints. Water-based styrene acrylic resin for garage floor paints and institutional w...展开 PLIOTEC® CR78 self-crosslinking styrene acrylic latex provides excellent chemical resistance, and superior hot-tire pick-up resistance, suitable for low VOC garage floor paints. Water-based styrene acrylic resin for garage floor paints and institutional wall coverings. 收起 | |
| PLIOTEC® CS24 | Synthomer | Pliotec CS24 is a water-based modified acrylic and adipic acid dihydride-free binder recommended for High gloss wood trim paints. It provides excellent blocking and cracking resistance with high gloss capability. | |
| PLIOTEC® EL25 | Synthomer | PLIOTEC® EL25 acrylic elastomeric latex provides excellent tensile/elongation properties, superior dirt pick-up resistance, great adhesion to concrete und UV resistance. Water-based elastomeric resin for vertical masonry coatings, roofing and tilt up coat...展开 PLIOTEC® EL25 acrylic elastomeric latex provides excellent tensile/elongation properties, superior dirt pick-up resistance, great adhesion to concrete und UV resistance. Water-based elastomeric resin for vertical masonry coatings, roofing and tilt up coatings. 收起 | |
| PLIOTEC™ HDT12 | Synthomer | PLIOTEC™ HDT12 is a modified styrene-acrylic copolymer latex based on Hydrophobic Dispersion Technology, with excellent adhesion to metals, and superior water resistance, delivering corrosion protection even without the use of anticorrosive pigments. PLIO...展开 PLIOTEC™ HDT12 is a modified styrene-acrylic copolymer latex based on Hydrophobic Dispersion Technology, with excellent adhesion to metals, and superior water resistance, delivering corrosion protection even without the use of anticorrosive pigments. PLIOTEC™ HDT12 is recommended for Direct-To-Metal (DTM) coatings, from high gloss enamels to anticorrosive primers. 收起 | |
| PLIOTEC® HDT16 | Synthomer | PLIOTEC® HDT16 modified styrene-acrylic copolymer latex provides excellent water and corrosion resistance, fast hardness development and superior adhesion to a wide variety of substrates (ferrous and non-ferrous metals, ceramic tiles, PVC and more). Water...展开 PLIOTEC® HDT16 modified styrene-acrylic copolymer latex provides excellent water and corrosion resistance, fast hardness development and superior adhesion to a wide variety of substrates (ferrous and non-ferrous metals, ceramic tiles, PVC and more). Water-based resin for anti-corrosion paints and primers, Direct-To-Metal (DTM) coatings and multi-surface renovation paints. 收起 | |
| PLIOTEC® LEB20 | Synthomer | PLIOTEC® LEB20 is pure acrylic copolymer that ensures superior resistance to exudation (surfactant leaching) and efflorescence, with excellent color retention, strong early rain resistance, and superior dirt pick-up resistance. Unique water-based resin fo...展开 PLIOTEC® LEB20 is pure acrylic copolymer that ensures superior resistance to exudation (surfactant leaching) and efflorescence, with excellent color retention, strong early rain resistance, and superior dirt pick-up resistance. Unique water-based resin for exterior masonry paints, topcoats for EIFS and house plinths, all-weather paints. 收起 | |
| PLIOTEC® PA05 | Synthomer | PLIOTEC® PA05 pure acrylic latex with high Tg provides excellent resistance to water, UV and chemicals, very good adhesion to concrete, and hot-tire pick-up resistance. Water-based resin for high performance coatings, concrete sealers and interior/exterio...展开 PLIOTEC® PA05 pure acrylic latex with high Tg provides excellent resistance to water, UV and chemicals, very good adhesion to concrete, and hot-tire pick-up resistance. Water-based resin for high performance coatings, concrete sealers and interior/exterior floor paints. 收起 | |
| PLIOTEC® PA90 | Synthomer | PLIOTEC® PA90 pure acrylic latex provides excellent water and blush resistance, very good weathering and UV resistance, and low coalescing demand. Water-based resin for pigmented coatings, stains, aggregate binders, and vertical clear coatings. | |
| PLIOTEC® PA90MT | Synthomer | Pliotec PA90MT is pure acrylic copolymer that provides excellent water and blush resistance, very good weathering and UV resistance, and low coalescing demand. Pliotec PA90MT is designed for formulation of water-based high performance coatings, concrete s...展开 Pliotec PA90MT is pure acrylic copolymer that provides excellent water and blush resistance, very good weathering and UV resistance, and low coalescing demand. Pliotec PA90MT is designed for formulation of water-based high performance coatings, concrete stains, and for vertical or horizontal architectural paints. 收起 | |
| PLIOTEC® SA40 | Synthomer | PLIOTEC® SA40 is styrene acrylic copolymer that provides excellent adhesion to concrete and outstanding resistance to alkali and efflorescence. PLIOTEC® SA40 is designed to formulate water-based waterproofing sealers, masonry primers, and concrete cure-an...展开 PLIOTEC® SA40 is styrene acrylic copolymer that provides excellent adhesion to concrete and outstanding resistance to alkali and efflorescence. PLIOTEC® SA40 is designed to formulate water-based waterproofing sealers, masonry primers, and concrete cure-and-seal products. 收起 | |
| PLIOTEC® SC105 | Synthomer | PLIOTEC® SC105 self-crosslinking pure acrylic latex provides excellent early water resistance, very good hot tire pick-up resistance, and adhesion to concrete, tile, and wood. Self-crosslinking resin for concrete and tile sealers, deck coatings, and porch...展开 PLIOTEC® SC105 self-crosslinking pure acrylic latex provides excellent early water resistance, very good hot tire pick-up resistance, and adhesion to concrete, tile, and wood. Self-crosslinking resin for concrete and tile sealers, deck coatings, and porch & floor coatings. 收起 | |
| PLIOTEC® SC203 | Synthomer | PLIOTEC® SC203 is a self-crosslinking all-acrylic latex, imparting excellent blush resistance and adhesion to multiple substrates including concrete and tile. It forms a durable film with good hot tire pick-up resistance. PLIOTEC® SC203 is recommended for...展开 PLIOTEC® SC203 is a self-crosslinking all-acrylic latex, imparting excellent blush resistance and adhesion to multiple substrates including concrete and tile. It forms a durable film with good hot tire pick-up resistance. PLIOTEC® SC203 is recommended for clear concrete sealers and floor coatings. It can be formulated into <50 g/L VOC coatings. 收起 | |
| PLIOWAY® EC1 | Synthomer | PLIOWAY® EC1 is a vinyl-acrylate copolymer soluble in low odour, dearomatized aliphatic solvents. It provides excellent adhesion on a wide variety of substrates, as well as outstanding stain blocking properties. Newtonian resin for low odour, stain blocki...展开 PLIOWAY® EC1 is a vinyl-acrylate copolymer soluble in low odour, dearomatized aliphatic solvents. It provides excellent adhesion on a wide variety of substrates, as well as outstanding stain blocking properties. Newtonian resin for low odour, stain blocking primers, waterproofing sealers, correction fluids and intumescent coatings. 收起 | |
| PLIOWAY® ECT | Synthomer | PLIOWAY® ECT is a partially crosslinked, vinyl-acrylate copolymer, soluble in low odour, dearomatized aliphatic solvents, mainly used in combination with PLIOWAY® EC1, eliminating the need for external thickeners which can often be detrimental to film per...展开 PLIOWAY® ECT is a partially crosslinked, vinyl-acrylate copolymer, soluble in low odour, dearomatized aliphatic solvents, mainly used in combination with PLIOWAY® EC1, eliminating the need for external thickeners which can often be detrimental to film performance. Rheological resin for formulation of low odour stain blocking primers, water proofing sealers, correction fluids and intumescent coatings. 收起 | |
| PLIOWAY™ ULTRA 200 | Synthomer | PLIOWAY™ ULTRA 200 is a vinyl-acrylate copolymer soluble in odourless isoparaffinic solvents, that forms non-yellowing, tough coatings with excellent adhesion and stain blocking properties. Highly soluble Newtonian resin for formulation of odourless stain...展开 PLIOWAY™ ULTRA 200 is a vinyl-acrylate copolymer soluble in odourless isoparaffinic solvents, that forms non-yellowing, tough coatings with excellent adhesion and stain blocking properties. Highly soluble Newtonian resin for formulation of odourless stain blocking primers, basement water proofing sealers, correction fluids and intumecent coatings. 收起 | |
| PLIOWAY® ULTRA 350LV | Synthomer | PLIOWAY® ULTRA 350LV is a vinyl-acrylate copolymer, soluble in odourless isoparaffinic solvents, that form tough, non-yellowing with excellent adhesion and stain blocking properties. Low viscosity Newtonian resin for formulation of odourless stain blockin...展开 PLIOWAY® ULTRA 350LV is a vinyl-acrylate copolymer, soluble in odourless isoparaffinic solvents, that form tough, non-yellowing with excellent adhesion and stain blocking properties. Low viscosity Newtonian resin for formulation of odourless stain blocking primers, basement water proofing sealers, correction fluids, and intumescent coatings. 收起 | |
| PLIOWAY® ULTRA G20 | Synthomer | PLIOWAY® ULTRA G20 is a vinyl-acrylate copolymer, soluble in odourless isoparaffinic solvents and used in combination with PLIOWAY® ULTRA 200 or ULTRA 350LV, eliminating the need for external thickeners which can often be detrimental to film performance. ...展开 PLIOWAY® ULTRA G20 is a vinyl-acrylate copolymer, soluble in odourless isoparaffinic solvents and used in combination with PLIOWAY® ULTRA 200 or ULTRA 350LV, eliminating the need for external thickeners which can often be detrimental to film performance. Pseudoplastic rheological resin for formulation of odourless stain blocking primers, basement water proofing sealers, correction fluids and intumescent coatings. 收起 | |
| PT-388 | Guangzhou Baohui Resin Co., Ltd. | PT-388 is a saturated polyester resin appearing as a clear liquid. It provides improved feel and elasticity without the addition of elastic powder, and is chemical and wear resistant. PT-388 finds application in elastic and villi paints. | |
| PT-466 | Guangzhou Baohui Resin Co., Ltd. | PT-466 is an elastic polyester resin appearing as a clear liquid. It provides bruise, wearing, solvent, and solution resistance. This product is commonly used in elastic and villi paints. | |
| PT-488 | Guangzhou Baohui Resin Co., Ltd. | PT-488 is a saturated polyester resin with special branch modification. Appearing as a clear liquid, it provides wearing, bruise, solvent, and solution resistance. It provides improved feel without the addition of elastic powder, and contains a general is...展开 PT-488 is a saturated polyester resin with special branch modification. Appearing as a clear liquid, it provides wearing, bruise, solvent, and solution resistance. It provides improved feel without the addition of elastic powder, and contains a general isocyanate curing agent. PT-488 finds application in elastic and villi paints. 收起 | |
| PT-558 | Guangzhou Baohui Resin Co., Ltd. | PT-558 is an elastic modified polyester resin appearing as a clear liquid. It has weather resistant and anti-pasting properties, and finds application in elastic and villi paints and coatings. | |
| PT-614 | Guangzhou Baohui Resin Co., Ltd. | PT-614 is a tohexanedionic polyester polyol appearing as a clear liquid. This product has bruise and scratch resistance, and is commonly used in elastic and villi paints. | |
| REVACRYL™ AE 3737 | Synthomer | REVACRYL™ AE 3737 is a finely dispersed, aqueous dispersion of an acrylic ester-styrene copolymer. The dispersion contains an anionic emulsifier system, is free from film forming aids, APEO, solvents, plasticizers, and ammonia. REVACRYL™ AE 3737 is a low ...展开 REVACRYL™ AE 3737 is a finely dispersed, aqueous dispersion of an acrylic ester-styrene copolymer. The dispersion contains an anionic emulsifier system, is free from film forming aids, APEO, solvents, plasticizers, and ammonia. REVACRYL™ AE 3737 is a low MFFT styrene-acrylic dispersion with high water-resistance, excellent wet adhesion and good flexibility. It is highly recommended for ETICS-primers and renders. 收起 | |
| REVACRYL™ AE 4625 | Synthomer | REVACRYL™ AE 4625 is a finely dispersed, aqueous dispersion of an acrylic ester-styrene copolymer. The dispersion contains an anionic emulsifier system, is free from film forming aids, APEO, solvents, plasticizers and ammonia. REVACRYL™ AE 4625 is a stand...展开 REVACRYL™ AE 4625 is a finely dispersed, aqueous dispersion of an acrylic ester-styrene copolymer. The dispersion contains an anionic emulsifier system, is free from film forming aids, APEO, solvents, plasticizers and ammonia. REVACRYL™ AE 4625 is a standard MFFT styrene-acrylic dispersion. It shows good exterior durability and very good blocking- and water-resistance. It is highly recommended for exterior wallpaints. Due to high saponification resistance it is suitable for silicate paints. 收起 | |
| REVACRYL™ AE 6030 | Synthomer | REVACRYL™ AE 6030 is a finely dispersed aqueous dispersion of a styrene-acrylic ester copolymer. The dispersion contains an anionic emulsifier system and is free from film forming aids, APEO, solvents and plasticizers. REVACRYL™ AE 6030 is a hydrophobic s...展开 REVACRYL™ AE 6030 is a finely dispersed aqueous dispersion of a styrene-acrylic ester copolymer. The dispersion contains an anionic emulsifier system and is free from film forming aids, APEO, solvents and plasticizers. REVACRYL™ AE 6030 is a hydrophobic styrene-acrylic dispersion. It shows an excellent adhesion to various metal substrate and a high water-resistance. It is highly recommended for anti-corrosive primers and non-decorative metal monocoats. 收起 | |
| REVACRYL™ R 245 | Synthomer | REVACRYL™ R 245 is a fine particle size, surfactant stabilised aqueous dispersion of a styrene and methacrylic ester-acrylic ester copolymer. REVACRYL™ R 245 offers excellent alkali resistance and water resistance with very high pigment binding characteri...展开 REVACRYL™ R 245 is a fine particle size, surfactant stabilised aqueous dispersion of a styrene and methacrylic ester-acrylic ester copolymer. REVACRYL™ R 245 offers excellent alkali resistance and water resistance with very high pigment binding characteristics. REVACRYL™ R 245 is recommended for high quality interior and exterior paints. REVACRYL™ R 245 is also suitable in the following applications: - Ready mixed fillers and ceramic tile adhesives - Cartridge applied Caulks/sealants and building adhesives. 收起 | |
| REVACRYL™ RM 4550 | Synthomer | REVACRYL RM 4550 is a specially modified, aqueous dispersion of a styrene-acrylic ester copolymer. The dispersion is free from film forming aids, APEO, solvents and plasticizers. REVACRYL RM 4550 shows excellent adhesion on mineral substrates and water-re...展开 REVACRYL RM 4550 is a specially modified, aqueous dispersion of a styrene-acrylic ester copolymer. The dispersion is free from film forming aids, APEO, solvents and plasticizers. REVACRYL RM 4550 shows excellent adhesion on mineral substrates and water-resistance. It is highly recommended for road marking paints. 收起 | |
| ROHAGIT™ SD 15 | Synthomer | ROHAGIT™ SD 15 is a finely dispersed aqueous dispersion of a thermoplastic methacrylic acid-acrylic ester copolymer, anionic stabilised. The dispersion is free from APEO, film forming aids, solvents and plasticizers. ROHAGIT™ SD 15 is a pure acrylic unive...展开 ROHAGIT™ SD 15 is a finely dispersed aqueous dispersion of a thermoplastic methacrylic acid-acrylic ester copolymer, anionic stabilised. The dispersion is free from APEO, film forming aids, solvents and plasticizers. ROHAGIT™ SD 15 is a pure acrylic universal ASE-thickener for pH-range > 8.0. It is UV stable and shows an excellent efficacy and is easy to incorporate. The consistency is pasty, not thready. 收起 | |
| TMPTA | Guangzhou Baohui Resin Co., Ltd. | TMPTA is a UV acrylic ester monomer appearing as a clear, transparent liquid. Featuring a high boiling point and low viscosity, it serves as the reactive dilution monomer of an acrylic acid in the radiation solidification reaction. TMPTA has bruise resist...展开 TMPTA is a UV acrylic ester monomer appearing as a clear, transparent liquid. Featuring a high boiling point and low viscosity, it serves as the reactive dilution monomer of an acrylic acid in the radiation solidification reaction. TMPTA has bruise resistance, and is suitable for the coating of wood and paper. 收起 | |
| UV531 | Guangzhou Baohui Resin Co., Ltd. | UV531 is a modified polyurenthane prepolymer with three functions. This clear, transparent liquid has medium viscosity and is characterized by leveling properties. UV531 provides additive color performance and is used to improve the adhesion of UV varnish...展开 UV531 is a modified polyurenthane prepolymer with three functions. This clear, transparent liquid has medium viscosity and is characterized by leveling properties. UV531 provides additive color performance and is used to improve the adhesion of UV varnish finish construction to the primer and substrate. It finds application in UV system paints. 收起 |
