UL Prospector

成功!

成功保存搜索结果
1,4-Butanediol (1,4-BDO) DCC (Dairen Chemical Corp.) 1,4-Butanediol (1,4-BDO) is produced by hydro-formulation and hydrogenation of Allyl Alcohol, carbon monoxide and hydrogen. 1,4-Butanediol is a colorless, high-boiling liquid with a low order of toxicity. 1,4-Butanediol is used as a raw material for manuf...展开 1,4-Butanediol (1,4-BDO) is produced by hydro-formulation and hydrogenation of Allyl Alcohol, carbon monoxide and hydrogen. 1,4-Butanediol is a colorless, high-boiling liquid with a low order of toxicity. 1,4-Butanediol is used as a raw material for manufacturing carrier solvent in printing ink, and is a key component of hot melt adhesive. 收起
2-Methyl-1,3-Propanediol DCC (Dairen Chemical Corp.) 2-Methyl-1,3-Propanediol is a by-product, which is produced by hydro-formulation and hydro-generation of Allyl Alcohol, carbon monoxide, and hydrogen. It is a colorless, low viscosity and toxic liquid with a unique molecular structure. 2-Methyl-1,3-Propan...展开 2-Methyl-1,3-Propanediol is a by-product, which is produced by hydro-formulation and hydro-generation of Allyl Alcohol, carbon monoxide, and hydrogen. It is a colorless, low viscosity and toxic liquid with a unique molecular structure. 2-Methyl-1,3-Propanediol is used as a raw material in monomers for the preparation of coatings and binders. 收起
ASKOCOAT™ 420 500 ASK Chemicals ASKOCOAT™ 420 is a modified phenolic resin formulation with natural oils. ASKOCOAT™ 500 is a modified isocyanate formulation. Both products are especially designed for fertilizer coatings to achieve controlled release properties.
ASKOCOAT™ 420 520 ASK Chemicals ASKOCOAT™ 420 is a modified phenolic resin formulation with natural oils. ASKOCOAT™ 520 is a modified isocyanate formulation. Both products are especially designed for fertilizer coatings to achieve controlled release properties.
ASKODRY 2210 ASK Chemicals ASKODRY 2210 is an excellent siccatives for waterborne oxidative drying alkyd resin systems, for example NECOWEL alkyd emulsions from ASK Chemicals GmbH. It is easy to emulsify in water and its special APEO-free emulsifier combination provides easy incorp...展开 ASKODRY 2210 is an excellent siccatives for waterborne oxidative drying alkyd resin systems, for example NECOWEL alkyd emulsions from ASK Chemicals GmbH. It is easy to emulsify in water and its special APEO-free emulsifier combination provides easy incorporation and good drying stability. The addition is made during the letdown phase. 收起
ASKODRY 2216 ASK Chemicals ASKODRY 2216 is an excellent siccatives for waterborne oxidative drying alkyd resin systems, for example NECOWEL alkyd emulsions from ASK Chemicals GmbH. It is easy to emulsify in water and its special APEO-free emulsifier combination provides easy incorp...展开 ASKODRY 2216 is an excellent siccatives for waterborne oxidative drying alkyd resin systems, for example NECOWEL alkyd emulsions from ASK Chemicals GmbH. It is easy to emulsify in water and its special APEO-free emulsifier combination provides easy incorporation and good drying stability. The addition is made during the letdown phase. 收起
ASKOFEN 295 E 60 ASK Chemicals ASKOFEN 295 E 60 is a low viscous phenol resol which is especially designed for impregnation textiles for reinforcements and special papers for friction materials. Due to the excellent penetration behavior materials with high thickness and density are imp...展开 ASKOFEN 295 E 60 is a low viscous phenol resol which is especially designed for impregnation textiles for reinforcements and special papers for friction materials. Due to the excellent penetration behavior materials with high thickness and density are impregnated homogeneously without contour scaling. ASKOFEN 295 E 60 is unlimited dilutable with ethanol, the solid content can be adjusted during the impregnation process. 收起
ASKOFEN 779 W 50 ASK Chemicals ASKOFEN 779 W 50 is a liquid, aqueous resorcinol-formaldehyde resin. ASKOFEN 779 W 50 is used to formulate RFL (Resorcinol–Formaldehyde–Latex) in combination with Latex like SB or preferably with styrene, butadiene, vinylpyridine latex. RFLs are used as a...展开 ASKOFEN 779 W 50 is a liquid, aqueous resorcinol-formaldehyde resin. ASKOFEN 779 W 50 is used to formulate RFL (Resorcinol–Formaldehyde–Latex) in combination with Latex like SB or preferably with styrene, butadiene, vinylpyridine latex. RFLs are used as adhesion promoters in the rubber industry to increase textile rubber adhesion. 收起
ASKOFEN R 9500 ASK Chemicals ASKOFEN R 9500 is a relatively high molecular weight resol with good compatibility to different resin systems. In combination with epoxy systems ASKOFEN R 9500 provides excellent chemical resistance with exception of strong alkalines and relatively good e...展开 ASKOFEN R 9500 is a relatively high molecular weight resol with good compatibility to different resin systems. In combination with epoxy systems ASKOFEN R 9500 provides excellent chemical resistance with exception of strong alkalines and relatively good elasticity. The product is a heat-reactive resin with limited shelf life. Extended storage at high temperatures should be avoided to prolong the useful life of the resins. 收起
ASKOFEN R 9600 ASK Chemicals ASKOFEN R 9600 is a butylated phenol resol with good compatibility to different resin systems, e.g. epoxy or polyester resins. The phenol resin has a low formaldehyde content of less than 0.5%, coatings with a formaldehyde content of less than 0.1% can be...展开 ASKOFEN R 9600 is a butylated phenol resol with good compatibility to different resin systems, e.g. epoxy or polyester resins. The phenol resin has a low formaldehyde content of less than 0.5%, coatings with a formaldehyde content of less than 0.1% can be formulated. Coatings based on ASKOFEN R 9600 provide good adhesion, hardness and flexibility as well as excellent sterilization resistance and chemical resistance with exception of strong alkalines. This product is recommended as a crosslinker for epoxy and polyester resins for packaging coatings, and is also suitable for can and coil coatings. 收起
Alkoxylated 2-Methyl-1,3-Propanediol DCC (Dairen Chemical Corp.) Alkoxylated 2-Methyl-1,3-Propanediol is produced by Alkoxylation of 2-Methyl-1,3-Propanediol and Alkoxide. It is a colorless liquid with two primary hydroxyls. Alkoxylated 2-Methyl-1,3-Propanediol is used as a raw material in printing inks, adhesives, and...展开 Alkoxylated 2-Methyl-1,3-Propanediol is produced by Alkoxylation of 2-Methyl-1,3-Propanediol and Alkoxide. It is a colorless liquid with two primary hydroxyls. Alkoxylated 2-Methyl-1,3-Propanediol is used as a raw material in printing inks, adhesives, and paints. 收起
Arobras™ 1065/I ASK Chemicals Arobras™ 1065/I is a urea-formaldehyde isobutyl resin, unmodified. As for the compatibility, it shows up with excellent pigment, and is good with alkyd resins and nitrocellulose.
Arobras™ 1767 ASK Chemicals Arobras™ 1767 is a thermosetting resin used for modifying alkyd resins. It has excellent compatibility with alkyd resins.
Arobras™ 1770 ASK Chemicals Arobras™ 1770 is a thermosetting resin used for modifying alkyd resins. It has excellent compatibility with alkyd resins.
Arobras™ 2002 ASK Chemicals Arobras™ 2002 is a hydroxylated alkyd resin recommended for varnishes and polyurethane paint. As for the compatibility, it is shown with good nitrocellulose and alkyd resins with short oil compatible with amino-resins.
Arobras™ 2060 ASK Chemicals Arobras™ 2060 is a pure alkyd resin, long in soybean oil. It has good compatibility with pigments , regular compatibility with protective oil and other resins, and is incompatible with nitrocellulose. It offers excellent gloss, superior spread and optimal...展开 Arobras™ 2060 is a pure alkyd resin, long in soybean oil. It has good compatibility with pigments , regular compatibility with protective oil and other resins, and is incompatible with nitrocellulose. It offers excellent gloss, superior spread and optimal drying. 收起
Arobras™ 2424 ASK Chemicals Arobras™ 2424 is a catalyst for polyurethane systems. It was developed for use as an accelerator of reaction.
Arobras™ 2570 ASK Chemicals Arobras™ 2570 is an accelerator-based oxidizing agents developed for the system based on alkyd oils and resins. Its formulation is balanced with all the necessary environment for drying or kiln agents. Variations in amount of Arobras™ 2570 offer different...展开 Arobras™ 2570 is an accelerator-based oxidizing agents developed for the system based on alkyd oils and resins. Its formulation is balanced with all the necessary environment for drying or kiln agents. Variations in amount of Arobras™ 2570 offer different drying time by increasing or decreasing the working time as needed. It is compatible with all alkyd-based oils. 收起
Arobras™ 5070/I ASK Chemicals Arobras™ 5070/I is a melamine-formaldehyde isobutyl resin for kiln-drying. As for the compatibility, it shows up with excellent pigment, good with alkyd resins, nitrocellulose with regular and is incompatible with oils.
Arobras™ 6120 ASK Chemicals Arobras™ 6120 is a pure alkyd drying resin, short in soybean oil. As for the compatibility, it shows up with excellent pigment, good with nitrocellulose and with regular oils.
Arobras™ 663 ASK Chemicals Arobras ™ 663 is a short phenolated alkyd resin in soya oil. As for the compatibility, it shows up with excellent pigment, good with chlorinated rubber and Amino resins and regular oils.
Arobras™ 8023 ASK Chemicals Arobras™ 8023 is a short alkyd resin with no protective oil (rice). It offers excellent features and good compatibility with nitrocellulose and amino-resins.
Arobras™ 8040 ASK Chemicals Arobras™ 8040 is a pure alkyd drying resin, short in soybean oil. As for the compatibility, it shows up with excellent pigment, good with nitrocellulose and with regular oils.
Arobras™ 8078 ASK Chemicals Arobras™ 8078 is a pure alkyd drying resin, short in soybean oil. As for the compatibility, it seems excellent with alkyd resins, pigments and other and with regular oils.
Arobras™ 8080 ASK Chemicals Arobras™ 8080 is an alkyd resin phenolated, short in soybean, great oil for paints and varnishes quick drying. As for the compatibility, it shows up with excellent pigment and good with nitrocellulose and alkyd resins.
Arobras™ 8081 ASK Chemicals Arobras™ 8081 is an alkyd resin phenolated, short in soybean, great oil for paints and varnishes quick drying. As for the compatibility, it shows up with excellent pigment and good with nitrocellulose and alkyd resins.
Arobras™ 8082 ASK Chemicals Arobras™ 8082 is a pure alkyd drying resin, short in soybean oil. As for the compatibility, it shows up with excellent pigment, good with nitrocellulose and with regular oils.
Arobras™ 9080 ASK Chemicals Arobras™ 9080 is a pure alkyd drying resin, average high solid soy oil. Shows good compatibility with other resins such as phenolated, short, medium, acrylated and regular, and compatibility with mineral oils.
Barium Stearate Weifang Jahwa Chemical Co., Ltd. (Weifang Fengtai New Material Co., Ltd.) Barium Stearate is a white powder that has a barium content of 20%. This product is often used as a flatting and sanding agent in lacquers, coatings and inks.
Biolin 100 ASK Chemicals Biolin 100 is a solvent-free copolymer resin based on renewable materials. Due to its high content of unsaturated double bonds and the hydrophobic polymer backbone Biolin 100 features a rapid air-drying with excellent final hardness. Biolin 100 contains n...展开 Biolin 100 is a solvent-free copolymer resin based on renewable materials. Due to its high content of unsaturated double bonds and the hydrophobic polymer backbone Biolin 100 features a rapid air-drying with excellent final hardness. Biolin 100 contains no siccative and therefore cobalt free or cobalt driers can be used. Biolin 100 can be used as 1K resin to formulate air-drying jointing compounds and sealants. Its distinct wetting behavior with various substrates like quartz sand and rubber granules is just one further advantage. 收起
CATALYST 704 ASK Chemicals Catalyst 704 is a relatively volatile tertiary amine and well suited to cure polyurethane formulations based on Askocoat technology. Dehydrated air as well as nitrogen are suitable carrier gases. The gas stream takes up the catalyst which is then applied ...展开 Catalyst 704 is a relatively volatile tertiary amine and well suited to cure polyurethane formulations based on Askocoat technology. Dehydrated air as well as nitrogen are suitable carrier gases. The gas stream takes up the catalyst which is then applied into the coating drum onto the uncured Askocoat-polyurethane layer of the fertilizer granules. Curing of the Askocoat-layer occurs within seconds. Surplus catalyst should be disposed of properly, e.g. by means of an amine scrubber. 收起
CATALYST 806 ASK Chemicals Catalyst 806 is a high reactive tertiary amine and well suited to cure polyurethane formulations based on Askocoat technology. Catalyst 806 has a high flash point, shows low volatility and therefore, ATEX-equipment can be avoided in most cases. Catalyst 8...展开 Catalyst 806 is a high reactive tertiary amine and well suited to cure polyurethane formulations based on Askocoat technology. Catalyst 806 has a high flash point, shows low volatility and therefore, ATEX-equipment can be avoided in most cases. Catalyst 806 is applied as fine spray into the coating drum onto the uncured Askocoat-polyurethane layer of the fertilizer granules. Curing of the Askocoat-layer occurs within seconds. Catalyst 806 has functional end-groups that irreversibly react into the polyurethane coating. 收起
DA-100 DCC (Dairen Chemical Corp.) DA-100 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-100 forms a flexible film with adhesive properties for broad applications. DA-100 is used as a base emu...展开 DA-100 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-100 forms a flexible film with adhesive properties for broad applications. DA-100 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-100 is also a base emulsion for floor, wall, or ceiling adhesives. 收起
DA-100L DCC (Dairen Chemical Corp.) DA-100L is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-100L forms a flexible film with adhesive properties for broad applications. DA-100L is used as a base e...展开 DA-100L is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-100L forms a flexible film with adhesive properties for broad applications. DA-100L is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-100L is also a base emulsion for floor, wall, or ceiling adhesives. 收起
DA-101 DCC (Dairen Chemical Corp.) DA-101 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-101 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C o...展开 DA-101 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-101 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 1500-2500 mPa.s. DA-101 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-101 is also a base emulsion for floor, wall, or ceiling adhesives. 收起
DA-102 DCC (Dairen Chemical Corp.) DA-102 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-102 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C o...展开 DA-102 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-102 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 2500-3700 mPa.s. DA-102 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-102 is also a base emulsion for floor, wall, or ceiling adhesives. 收起
DA-102H DCC (Dairen Chemical Corp.) DA-102H is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-102H forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C...展开 DA-102H is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-102H forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 3500-4500 mPa.s. DA-102H is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-102H is also a base emulsion for floor, wall, or ceiling adhesives. 收起
DA-103 DCC (Dairen Chemical Corp.) DA-103 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-103 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C o...展开 DA-103 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-103 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 1500-2500 mPa.s. DA-103 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-103 is also a base emulsion for floor, wall, or ceiling adhesives. 收起
DA-103H DCC (Dairen Chemical Corp.) DA-103H is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-103H forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C...展开 DA-103H is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-103H forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 3200-4200 mPa.s. DA-103H is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-103H is also a base emulsion for floor, wall, or ceiling adhesives. 收起
DA-104 DCC (Dairen Chemical Corp.) DA-104 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-104 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C o...展开 DA-104 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-104 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 2000-3000 mPa.s. DA-104 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-104 is also a base emulsion for floor, wall, or ceiling adhesives. 收起
DA-107 DCC (Dairen Chemical Corp.) DA-107 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-107 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C o...展开 DA-107 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-107 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 1000-2500 mPa.s. DA-107 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-107 is also a base emulsion for floor, wall, or ceiling adhesives. 收起
DA-1100 DCC (Dairen Chemical Corp.) DA-1100 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and it forms a stable emulsion. DA-1100 improves adhesion, flex strength, abrasion resistance, and workability of modified compounds. DA-1100 ca...展开 DA-1100 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and it forms a stable emulsion. DA-1100 improves adhesion, flex strength, abrasion resistance, and workability of modified compounds. DA-1100 can be used in tile adhesives. 收起
DA-111 DCC (Dairen Chemical Corp.) DA-111 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-111 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C o...展开 DA-111 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-111 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 1500-2500 mPa.s. It is designed as a medium Tg product at around approximately 14 °C. DA-111 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-111 is also a base emulsion for floor, wall, or ceiling adhesives. 收起
DA-1120 DCC (Dairen Chemical Corp.) DA-1120 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and it forms a stable emulsion. DA-1120 improves adhesion, flex strength, abrasion resistance, and workability of modified compounds. DA-1120 ca...展开 DA-1120 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and it forms a stable emulsion. DA-1120 improves adhesion, flex strength, abrasion resistance, and workability of modified compounds. DA-1120 can be used in tile adhesives. 收起
DA-1122 DCC (Dairen Chemical Corp.) DA-1122 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and it forms a stable emulsion. DA-1122 improves adhesion, flex strength, abrasion resistance, and workability of modified compounds. DA-1122 ca...展开 DA-1122 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and it forms a stable emulsion. DA-1122 improves adhesion, flex strength, abrasion resistance, and workability of modified compounds. DA-1122 can be used in tile adhesives. 收起
DA-1126 DCC (Dairen Chemical Corp.) DA-1126 is a water re-dispersible powder based on a vinyl acetate/ethylene copolymer based containing polyvinyl alcohol as a protective colloid. DA-1126 improves adhesion, flexibility, plasticity, abrasion resistance and workability of modified compounds....展开 DA-1126 is a water re-dispersible powder based on a vinyl acetate/ethylene copolymer based containing polyvinyl alcohol as a protective colloid. DA-1126 improves adhesion, flexibility, plasticity, abrasion resistance and workability of modified compounds. It is used in ceramic tile adhesives, and EIFS. 收起
DA-1130 DCC (Dairen Chemical Corp.) DA-1130 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1130 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds....展开 DA-1130 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1130 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds. It can be used in tile adhesives. 收起
DA-1133 DCC (Dairen Chemical Corp.) DA-1133 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1133 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds....展开 DA-1133 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1133 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds. DA-1133 is used in construction adhesives. 收起
DA-117 DCC (Dairen Chemical Corp.) DA-117 is a non-plasticized, aqueous, milky, white dispersion of a vinyl acetate-ethylene copolymer with high solid contents developed to provide a versatile base for construction applications. After evaporation of its water content, DA-117 forms a flexib...展开 DA-117 is a non-plasticized, aqueous, milky, white dispersion of a vinyl acetate-ethylene copolymer with high solid contents developed to provide a versatile base for construction applications. After evaporation of its water content, DA-117 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 500-1500 mPa.s. DA-117 is used in joint compounds and decorative coatings, and carpet back coatings. 收起
DA-1200 DCC (Dairen Chemical Corp.) DA-1200 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1200 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds....展开 DA-1200 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1200 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds. DA-1200 is used in tile adhesives. 收起
DA-1210 DCC (Dairen Chemical Corp.) DA-1210 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1210 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds....展开 DA-1210 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1210 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds. DA-1210 is used in construction adhesives, sealing slurries, and repair mortars. 收起
DA-125 DCC (Dairen Chemical Corp.) DA-125 is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. Due to its low Tg at around -8 °C, the dry film remains flexible even at temperatures below 0 °C. In general, DA-125 is used as general adhesive f...展开 DA-125 is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. Due to its low Tg at around -8 °C, the dry film remains flexible even at temperatures below 0 °C. In general, DA-125 is used as general adhesive for packaging, bookbinding, and bonding for plastic films, coated papers. DA-125 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-125 is also a base emulsion for floor, wall, or ceiling adhesives. 收起
DA-128 DCC (Dairen Chemical Corp.) DA-128 is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. Due to its low Tg at around -13°C, the dry film remains flexible even at temperatures below 0 °C. In general, DA-128 is used as general adhesive f...展开 DA-128 is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. Due to its low Tg at around -13°C, the dry film remains flexible even at temperatures below 0 °C. In general, DA-128 is used as general adhesive for packaging, bookbinding, and bonding for plastic films, coated papers. DA-128 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-128 is also a base emulsion for floor, wall, or ceiling adhesives. 收起
DA-128H DCC (Dairen Chemical Corp.) DA-128H is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. Due to its low Tg at around -13 °C, the dry film remains flexible even at temperatures below 0 °C. In general, DA-128H is used as general adhesiv...展开 DA-128H is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. Due to its low Tg at around -13 °C, the dry film remains flexible even at temperatures below 0 °C. In general, DA-128H is used as general adhesive for packaging, bookbinding, and bonding for plastic films, coated papers. DA-128H is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-128H is also a base emulsion for floor, wall, or ceiling adhesives. 收起
DA-1400 DCC (Dairen Chemical Corp.) DA-1400 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1400 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds....展开 DA-1400 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1400 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds. DA-1400 is used in tile adhesives, and sealing slurries. 收起
DA-1410 DCC (Dairen Chemical Corp.) DA-1410 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1410 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds....展开 DA-1410 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1410 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds. DA-1410 is used in construction adhesives. 收起
DA-1420 DCC (Dairen Chemical Corp.) DA-1420 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1420 improves adhesion, flexural strength, plasticity, abrasion resistance, and workability of modified compound...展开 DA-1420 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1420 improves adhesion, flexural strength, plasticity, abrasion resistance, and workability of modified compounds. DA-1420 is used in tile adhesives. 收起
DA-1430 DCC (Dairen Chemical Corp.) DA-1430 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1430 improves adhesion, flex strength, plasticity, abrasion resistance, and workability of modified compounds. D...展开 DA-1430 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1430 improves adhesion, flex strength, plasticity, abrasion resistance, and workability of modified compounds. DA-1430 is used in tile adhesives, and trowelling compounds. 收起
DA-1450 DCC (Dairen Chemical Corp.) DA-1450 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1450 improves adhesion, flex strength, plasticity, abrasion resistance, and workability of modified compounds. D...展开 DA-1450 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1450 improves adhesion, flex strength, plasticity, abrasion resistance, and workability of modified compounds. DA-1450 is used in tile adhesives, and construction adhesives. 收起
DA-179 DCC (Dairen Chemical Corp.) DA-179 is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. The soft, flexible polymer makes use of a surfactant protection system to provide excellent water resistance and soft, flexible films. DA-179 is u...展开 DA-179 is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. The soft, flexible polymer makes use of a surfactant protection system to provide excellent water resistance and soft, flexible films. DA-179 is used in high performance waterproof coatings. 收起
DA-180L DCC (Dairen Chemical Corp.) DA-180L is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. After the evaporation of its water content, DA-180L dries to a clear, soft and flexible film to provide a better waterproofing property. DA-180L ...展开 DA-180L is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. After the evaporation of its water content, DA-180L dries to a clear, soft and flexible film to provide a better waterproofing property. DA-180L is used in general adhesives. 收起
DA-183 DCC (Dairen Chemical Corp.) DA-183 is a vinyl acetate-ethylene copolymer emulsion for cement or plaster based mortars. The addition causes of DA-183 increases the adhesion of mortars to other mineral surfaces. These modified coatings show much better elasticity. DA-183 is used in mo...展开 DA-183 is a vinyl acetate-ethylene copolymer emulsion for cement or plaster based mortars. The addition causes of DA-183 increases the adhesion of mortars to other mineral surfaces. These modified coatings show much better elasticity. DA-183 is used in mortars or grouts. 收起
DA-265 DCC (Dairen Chemical Corp.) DA-265 is a non-plasticized, aqueous, milky, white vinyl acetate-ethylene-acrylate terpolymer emulsion with a solid content of 65%. After drying, a water-resistant, clear and flexible film is formed, exhibiting stability against degradation, discoloration...展开 DA-265 is a non-plasticized, aqueous, milky, white vinyl acetate-ethylene-acrylate terpolymer emulsion with a solid content of 65%. After drying, a water-resistant, clear and flexible film is formed, exhibiting stability against degradation, discoloration by UV-light, oxygen and the ozone. DA-265 is used in mineral coatings, and floor, wall, or ceiling adhesives. . 收起
DA-265H DCC (Dairen Chemical Corp.) DA-265H is a non-plasticized, aqueous, milky, white vinyl acetate-ethylene-acrylate terpolymer emulsion with a solid content of 65%. A water-resistant, clear and flexible film is formed after drying. This film exhibits stability against degradation, disco...展开 DA-265H is a non-plasticized, aqueous, milky, white vinyl acetate-ethylene-acrylate terpolymer emulsion with a solid content of 65%. A water-resistant, clear and flexible film is formed after drying. This film exhibits stability against degradation, discoloration, oxygen, and the ozone. Because of DA-265H's adjusted ethylene content, this film is extremely tacky and uses no plasticizers to get softness or flexibility. DA-265H is used in mineral coatings, and floor, wall, or ceiling adhesives. 收起
DA-310 DCC (Dairen Chemical Corp.) DA-310 is a non-plasticized, aqueous, milky, white vinyl acetate-ethylene copolymer emulsion containing incorporated carboxylic groups. It exhibits VAE emulsion properties together with increased adhesion to metals, like aluminum. DA-310 is used for seali...展开 DA-310 is a non-plasticized, aqueous, milky, white vinyl acetate-ethylene copolymer emulsion containing incorporated carboxylic groups. It exhibits VAE emulsion properties together with increased adhesion to metals, like aluminum. DA-310 is used for sealing plastics or metals to other substrates, and as a raw material for adhesives. 收起
DA-3510 DCC (Dairen Chemical Corp.) DA-3510 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. This resin is soft and flexible, because of its relatively high ethylene content. DA-3510 enhances the adhesion, fle...展开 DA-3510 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. This resin is soft and flexible, because of its relatively high ethylene content. DA-3510 enhances the adhesion, flexural strength, plasticity, and workability of modified compounds. DA-3510 is recommended for use as a sole binder for making construction adhesives and seals. 收起
DA-371 DCC (Dairen Chemical Corp.) DA-371 is an aqueous, non-plasticized, milky white emulsion synthesized from vinyl acetate and ethylene. DA-371 with different paint formulations can bring about many changes of the gloss of indoor-paints in accordance with the customers’ demand. DA-371 i...展开 DA-371 is an aqueous, non-plasticized, milky white emulsion synthesized from vinyl acetate and ethylene. DA-371 with different paint formulations can bring about many changes of the gloss of indoor-paints in accordance with the customers’ demand. DA-371 is used in low VOC interior paints, semi flat and semi gloss paints, deep shade paints, exterior paints, and plaster and textured coatings. 收起
DA-500 DCC (Dairen Chemical Corp.) DA-500 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-500 forms a flexible film with adhesive properties for a broad range of applications. DA-500 is used in...展开 DA-500 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-500 forms a flexible film with adhesive properties for a broad range of applications. DA-500 is used in base for EPI wood glue systems, as a base emulsion for floor, wall or ceiling adhesives, and plastic (PVC) or metal foil bonding. 收起
DA-502 DCC (Dairen Chemical Corp.) DA-502 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-502 forms a flexible film with adhesive properties for a broad range of applications. It has a viscosit...展开 DA-502 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-502 forms a flexible film with adhesive properties for a broad range of applications. It has a viscosity at 25 °C of 3000-4000 mPa.s. DA-502 is used in base for EPI wood glue systems, as a base emulsion for floor, wall or ceiling adhesives, and plastic (PVC) or metal foil bonding. 收起
DA-511 DCC (Dairen Chemical Corp.) DA-511 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-511 forms a flexible film with adhesive properties for a broad range of applications. It has a viscosit...展开 DA-511 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-511 forms a flexible film with adhesive properties for a broad range of applications. It has a viscosity at 25 °C of 1500-2500 mPa.s. DA-511 is used in base for EPI wood glue systems, as a base emulsion for floor, wall or ceiling adhesives, and plastic (PVC) or metal foil bonding. 收起
DA-523 DCC (Dairen Chemical Corp.) DA-523 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-523 forms a flexible film with adhesive properties for a broad range of applications. It has a viscosit...展开 DA-523 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-523 forms a flexible film with adhesive properties for a broad range of applications. It has a viscosity at 25 °C of 700-1000 mPa.s. DA-523 is used in base for EPI wood glue systems, as a base emulsion for floor, wall or ceiling adhesives, and plastic (PVC) or metal foil bonding. 收起
DA-524 DCC (Dairen Chemical Corp.) DA-524 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-524 forms a tough but still flexible film with adhesive properties for a broad range of applications. I...展开 DA-524 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-524 forms a tough but still flexible film with adhesive properties for a broad range of applications. It has a viscosity at 25 °C of 1500-2500 mPa.s. DA-524 is used in base for EPI wood glue systems, as a base emulsion for floor, wall or ceiling adhesives, and plastic (PVC) or metal foil bonding. 收起
DA-6200 DCC (Dairen Chemical Corp.) DA-6200 is a water re-dispersible powder based on vinyl acetate/ethylene copolymer containing polyvinyl alcohol as a protective colloid. DA-6200 contains a fine mineral filler as an anti-blocking agent. It is free of solvents, plasticizers and film-formin...展开 DA-6200 is a water re-dispersible powder based on vinyl acetate/ethylene copolymer containing polyvinyl alcohol as a protective colloid. DA-6200 contains a fine mineral filler as an anti-blocking agent. It is free of solvents, plasticizers and film-forming agents. DA-6200 is recommended for blending with inorganic binders such as cement, hydrated lime to modify mortar hydration systems, tile adhesives, EIFS, and finishing plasters. 收起
DA-652 DCC (Dairen Chemical Corp.) DA-652 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, the extra viscous DA-652 forms a flexible film with adhesive properties for a broad range of applications....展开 DA-652 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, the extra viscous DA-652 forms a flexible film with adhesive properties for a broad range of applications. It has a viscosity at 25 °C of 15000-25000 mPa.s. DA-652 is used as base emulsion for floor, wall, or ceiling adhesives. 收起
DA-691 DCC (Dairen Chemical Corp.) DA-691 is a non-plasticized, aqueous, milky white, cross-linkable copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-691 forms a flexible and soft film. It has a viscosity at 25 °C of 100-500 mPa.s. DA-691...展开 DA-691 is a non-plasticized, aqueous, milky white, cross-linkable copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-691 forms a flexible and soft film. It has a viscosity at 25 °C of 100-500 mPa.s. DA-691's main use is in EPI wood glue. 收起
DA-901 DCC (Dairen Chemical Corp.) DA-901 is a non-plasticized, aqueous, milky white terpolymer dispersion based on vinyl chloride, vinyl acetate and ethylene. Due to it's low Tg levels it provides a soft transparent film. It is generally used as an adhesive and provides a fire retardant p...展开 DA-901 is a non-plasticized, aqueous, milky white terpolymer dispersion based on vinyl chloride, vinyl acetate and ethylene. Due to it's low Tg levels it provides a soft transparent film. It is generally used as an adhesive and provides a fire retardant property. DA-901 is used as a general adhesive and is specially suitable for wood applications. 收起
DA-908 DCC (Dairen Chemical Corp.) DA-908 is an aqueous, milky white terpolymer dispersion based on vinyl chloride, vinyl acetate and ethylene. DA-908 leads to a clear film with low surface tack, and resistance to water, alkali, solvents, light, and aging. It has a Tg value of 20-30 °C and...展开 DA-908 is an aqueous, milky white terpolymer dispersion based on vinyl chloride, vinyl acetate and ethylene. DA-908 leads to a clear film with low surface tack, and resistance to water, alkali, solvents, light, and aging. It has a Tg value of 20-30 °C and is a cloudy substance initially. DA-908 is used as a base emulsion for general adhesives and EPI wood adhesives. 收起
DA-910 DCC (Dairen Chemical Corp.) DA-910 is a copolymer of Ethylene and Vinyl Chloride with amide functionality. It has fire retardant, water, and alkali resistance properties. It has a Tg rating of between -2 and 2 °C. DA-910 can be used as a base sealant emulsion in non-woven fabrics an...展开 DA-910 is a copolymer of Ethylene and Vinyl Chloride with amide functionality. It has fire retardant, water, and alkali resistance properties. It has a Tg rating of between -2 and 2 °C. DA-910 can be used as a base sealant emulsion in non-woven fabrics and paper binder, paper and fabric impregnation binder, flocking binder, car sheet and carpet back coating, and adhesive for high frequency curing. 收起
DA-920 DCC (Dairen Chemical Corp.) DA-920 is a copolymer of Ethylene and Vinyl Chloride with amide functionality. It has fire retardant, water, and alkali resistance properties. It has a Tg rating of between 18 and 22 °C. DA-920 can be used as a base sealant emulsion in non-woven fabrics a...展开 DA-920 is a copolymer of Ethylene and Vinyl Chloride with amide functionality. It has fire retardant, water, and alkali resistance properties. It has a Tg rating of between 18 and 22 °C. DA-920 can be used as a base sealant emulsion in non-woven fabrics and paper binder, paper and fabric impregnation binder, flocking binder, car sheet and carpet back coating, and adhesive for high frequency curing. 收起
DA-930 DCC (Dairen Chemical Corp.) DA-930 is a copolymer of Ethylene and Vinyl Chloride with amide functionality. It has fire retardant, water, and alkali resistance properties. It has a Tg rating of between 28 and 32 °C. DA-930 can be used as a base sealant emulsion in non-woven fabrics a...展开 DA-930 is a copolymer of Ethylene and Vinyl Chloride with amide functionality. It has fire retardant, water, and alkali resistance properties. It has a Tg rating of between 28 and 32 °C. DA-930 can be used as a base sealant emulsion in non-woven fabrics and paper binder, paper and fabric impregnation binder, flocking binder, car sheet and carpet back coating, and adhesive for high frequency curing. 收起
EMULGATOR 5420 ASK Chemicals EMULGATOR 5420 is a white-yellow paste with a stock point of approx. 40 °C. It is a non-ionic emulsifier system especially designed to emulsify long oil alkyds like NECOWEL FLE in water. It is formulated to meet a HLB value (hydrophibic lipophilic balance...展开 EMULGATOR 5420 is a white-yellow paste with a stock point of approx. 40 °C. It is a non-ionic emulsifier system especially designed to emulsify long oil alkyds like NECOWEL FLE in water. It is formulated to meet a HLB value (hydrophibic lipophilic balance) of 11. 收起
ExBar™ 200 Excalibar Minerals LLC ExBar™ 200 is a raw mineral material that is manufactured from natural barium sulfate ore. This product is used in many different applications such as paints, adhesives and sealants. It has a median particle size of 15.0u and an oil absorption of 9.
ExBar™ 325 Excalibar Minerals LLC ExBar™ 325 is a raw mineral material that is manufactured from natural barium sulfate ore. This product is used in many different applications such as paints, adhesives and sealants. It has a median particle size of 10.0u and an oil absorption of 10.
ExBar™ 400 Excalibar Minerals LLC ExBar™ 400 is a raw mineral material that is manufactured from natural barium sulfate ore. This product is used in many different applications such as paints, adhesives and sealants. It has a median particle size of 8.0u and an oil absorption of 12.
ExBar™ W 1 Excalibar Minerals LLC ExBar™ W 1 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 1 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 1u and an oil absorption of 15. 收起
ExBar™ W 2 Excalibar Minerals LLC ExBar™ W 2 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 2 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 2u and an oil absorption of 13. 收起
ExBar™ W 3 Excalibar Minerals LLC ExBar™ W 3 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 3 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 3u and an oil absorption of 13. 收起
ExBar™ W 325 Excalibar Minerals LLC ExBar™ W 325 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are pr...展开 ExBar™ W 325 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. 收起
ExBar™ W 4 Excalibar Minerals LLC ExBar™ W 4 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 4 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 4u and an oil absorption of 12. 收起
ExBar™ W 400 Excalibar Minerals LLC ExBar™ W 400 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are pr...展开 ExBar™ W 400 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 8u and an oil absorption of 10. 收起
ExCal® 100 Excalibar Minerals LLC ExCal® 100 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications.
ExCal® 200 Excalibar Minerals LLC ExCal® 200 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications.
ExCal® 325 Excalibar Minerals LLC ExCal® 325 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications.
ExCal® 400 Excalibar Minerals LLC ExCal® 400 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications.
ExCal® CW 100 Excalibar Minerals LLC ExCal® CW 100 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand ar...展开 ExCal® CW 100 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand are a standard. 收起
ExCal® CW 200 Excalibar Minerals LLC ExCal® CW 200 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand ar...展开 ExCal® CW 200 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand are a standard. 收起
ExCal® CW 325 Excalibar Minerals LLC ExCal® CW 325 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand ar...展开 ExCal® CW 325 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand are a standard. 收起
GP PHENOLIC RESIN 8900 ASK Chemicals GP PHENOLIC RESIN 8900 is a pure self-reactive phenolic resin solution in ethanol (resol-type) with medium reactivity. The cured resin provides excellent chemical and heat resistance and especially good flame resistance combined with low smoke density.
GP PHENOLIC RESIN BKR 2620 ASK Chemicals GP PHENOLIC RESIN BKR 2620 is a solid thermosetting alkylated phenolic resin. BKR 2620 offers good chemical resistance except against strong alkaline media. The resin is used as modifier for epoxy, vinyl and acrylic polymers to improve performance without...展开 GP PHENOLIC RESIN BKR 2620 is a solid thermosetting alkylated phenolic resin. BKR 2620 offers good chemical resistance except against strong alkaline media. The resin is used as modifier for epoxy, vinyl and acrylic polymers to improve performance without sacrificing flexibility. The flexibility is nearly not influenced by the addition of the resin. BKR 2620 is especially useful in providing excellent substrate wetting characteristics and intercoat adhesion to vinyl organosols. 收起
GP PHENOLIC RESIN BKS 2600 ASK Chemicals GP PHENOLIC RESIN BKS 2600 is a pure heat-reactive phenolic resin. It provide the highest level of chemical resistance except against strong alkaline media and can be used as sole binder for interior protective coatings for drums. Baking times are relativ...展开 GP PHENOLIC RESIN BKS 2600 is a pure heat-reactive phenolic resin. It provide the highest level of chemical resistance except against strong alkaline media and can be used as sole binder for interior protective coatings for drums. Baking times are relatively short, optimal baking conditions are in the range of 15 min. at 210 °C. Baking coatings based on GP PHENOLIC RESIN BKS 2600 provide very good adhesion on rigid metallic substrates. Coatings can be modified with e.g. polyvinyl butyral to enable them to withstand shocks or rough handling and yet maintain their chemical resistance. 收起