| AR-515 | Chan Sieh Enterprises Co, Ltd. | AR-515 is an IBMA homo-polymer acrylic resin. This product has high tolerance for pigments and low odour. It can be used in aerosol paints and inks. AR-515 creates a flexible film and is solvent in ketones and aromatics. | |
| AR-531 | Chan Sieh Enterprises Co, Ltd. | AR-531 is a BMA copolymer acrylic resin. This product has a high tolerance for pigments, and shows good heat resistance. It can be used in aerosols, packaging inks, flexo and gravure printing inks, alkyd paints, and parquet polishes. AR-531 is solvent ...展开 AR-531 is a BMA copolymer acrylic resin. This product has a high tolerance for pigments, and shows good heat resistance. It can be used in aerosols, packaging inks, flexo and gravure printing inks, alkyd paints, and parquet polishes. AR-531 is solvent in alcohols, ketones, aromatics, and esters. 收起 | |
| B-3000 | Chan Sieh Enterprises Co, Ltd. | B-3000 is an acrylic resin in the form of a brown liquid. This product offers good water solubility. It can be used as a binder for baking paint applications. | |
| CRAYVALLAC® A-72-A2-60 | Arkema Rheology & Specialty Additives | CRAYVALLAC® A-72-A2-60 is a high-performance polyacrylate surface tension modifier for the control of coating surface properties. CRAYVALLAC® A-72-A2-60 is suitable for use in a wide range of solvent-based systems and applications. CRAYVALLAC® A-72-A2-60 ...展开 CRAYVALLAC® A-72-A2-60 is a high-performance polyacrylate surface tension modifier for the control of coating surface properties. CRAYVALLAC® A-72-A2-60 is suitable for use in a wide range of solvent-based systems and applications. CRAYVALLAC® A-72-A2-60 has been developed specifically to enhance substrate wetting and to improved leveling. As a result, when compared with unactivated coating, film defects such as craters, fisheyes, orange peel, and pinholes are reduced and a superior overall appearance of the film is visible with no degradation of the exterior durability. 收起 | Request Sample |
| L-2812 | Chan Sieh Enterprises Co, Ltd. | L-2812 is an aliphatic polyether polyol with a solid content ratio of 30%. This product is soft and flexible, provides water resistance, and does not yellow. It can be used to coat flexible substrates, and to coat leather. | |
| L-2812M | Chan Sieh Enterprises Co, Ltd. | L-2812M is an aliphatic polyether polyol with a solid content ratio of 35%. This product is soft and flexible, provides water-resistance, and does not yellow. It can be used to coat flexible substrates, and to coat leather. | |
| L-2855 | Chan Sieh Enterprises Co, Ltd. | L-2855 is an aliphatic polyether polyol with a solid content ratio of 28%. This product has high transparency and flexibility, good adhesion to many plastics, and cross-links well. It can be used in primers. | |
| L-2872 | Chan Sieh Enterprises Co, Ltd. | L-2872 is an aliphatic polyether polyol with a solid content ratio of 33%. This product is highly transparent and flexible, and provides good adhesion on many plastics with good solvent resistance. It can be used in primer paints. | |
| L-2887 | Chan Sieh Enterprises Co, Ltd. | L-2887 is an aliphatic polyether polyol with a solid content ratio of 40%. This product is soft and flexible, and provides UV and abrasion resistance. It can be used as a lacquer for cork floors, and for wood and parquet. | |
| L-3410 | Chan Sieh Enterprises Co, Ltd. | L-3410 is an ultraviolet-curable polyol with a solid-content ratio of 39,8%. This product is hard and flexible, and provides abrasion, chemical and stain resistance. It can be used in PVC and non-PVC floor coatings, to coat furniture, paper, plastic, wo...展开 L-3410 is an ultraviolet-curable polyol with a solid-content ratio of 39,8%. This product is hard and flexible, and provides abrasion, chemical and stain resistance. It can be used in PVC and non-PVC floor coatings, to coat furniture, paper, plastic, wood, parquet, overprint varnishes, and inks. 收起 | |
| Nitrocellulose Chips | Hengshui New Eastern Chemical Industry Co,. Ltd. | Nitrocellulose chips are a white flaky or powdery fiber. This product has a low moisture rate and is used to formulate high brightness paints and coatings. This product is well suited for use in fast-drying automobile lacquers, printing inks, coatings, an...展开 Nitrocellulose chips are a white flaky or powdery fiber. This product has a low moisture rate and is used to formulate high brightness paints and coatings. This product is well suited for use in fast-drying automobile lacquers, printing inks, coatings, and damp-proofing cellophane paper and adhesives. 收起 | |
| Nitrocellulose Cotton | Hengshui New Eastern Chemical Industry Co,. Ltd. | Nitrocellulose cotton is a white floc and chips fiber made from refined cotton and nitric acid. It can be liquified in acetonet, ethyl acetate, camphor ethanol liquid. This product is well suited for producing any color celluloid, nitryl lacquers, wood fi...展开 Nitrocellulose cotton is a white floc and chips fiber made from refined cotton and nitric acid. It can be liquified in acetonet, ethyl acetate, camphor ethanol liquid. This product is well suited for producing any color celluloid, nitryl lacquers, wood finishes, and fast-printing inks. 收起 | |
| Nitrocellulose Solution H Type | Hengshui New Eastern Chemical Industry Co,. Ltd. | Nitrocellulose solution H type is a slightly sticky yellowish liquid made from high nitrogen content nitrocellulose. It has good miscibility and can be mixed with alkyd, maleic resin, and acrylic resin. It is quick drying and forms a hard durable film. Th...展开 Nitrocellulose solution H type is a slightly sticky yellowish liquid made from high nitrogen content nitrocellulose. It has good miscibility and can be mixed with alkyd, maleic resin, and acrylic resin. It is quick drying and forms a hard durable film. This product is well suited for use in lacquers for wood and plastic. 收起 | |
| Nitrocellulose solution L type | Hengshui New Eastern Chemical Industry Co,. Ltd. | Nitrocellulose solution L type is a slightly sticky yellowish liquid made from low nitrogen content nitrocellulose. It has good miscibility and is alcohol soluble. It is quick drying and forms a hard durable film. This product is well suited for use in la...展开 Nitrocellulose solution L type is a slightly sticky yellowish liquid made from low nitrogen content nitrocellulose. It has good miscibility and is alcohol soluble. It is quick drying and forms a hard durable film. This product is well suited for use in lacquers for wood and plastic. 收起 | |
| OEM Topcoat with Metallic Flake Pigments (Formulation #SPF_CTG_033_2203) | Arkema Rheology & Specialty Additives | This OEM topcoat formulation features Coadis™ 790. | |
| Solvent-Based Decorative Paint Formulation (Formulation #SPF_CTG_036_2112) | Arkema Rheology & Specialty Additives | This solvent-based decorative paint formulation features Crayvallac® D-801 and Crayvallac® LA-250. |
