| SCHWEGO® Foam 6388 | Bernd Schwegmann GmbH & Co. KG | Schwego® Foam 6388是一种界面活性添加剂，可影响表面张力。该特性可最大程度减少油漆生产或施工过程中气泡的形成。所有形成的气泡都可被快速消除。一般来说，Schwego® Foam 6388有助于漆膜的流平 | |
| SCHWEGO® foam 6390 | Bernd Schwegmann GmbH & Co. KG | SCHWEGO® foam 6390是一种用于水性涂料系统的消泡剂。它在水性介质的防范，控制和去除泡沫方面效率很高，因此可以在几乎所有水基油漆和涂料中使用。这款产品适用于需要高纯度水平的工业应用中，也在食品行业中有多种应用。 | |
| SCHWEGO® Foam 8013 | Bernd Schwegmann GmbH & Co. KG | Schwego® Foam 8013是一种液体、高效消泡剂，适用于所有水性体系和胶粘剂，特别是基于聚氨酯和丙烯酸酯的水性体系和胶粘剂。 Schwego® Foam 8013易乳化，不含硅 | |
| SCHWEGO® Foam 8025 | Bernd Schwegmann GmbH & Co. KG | 非常有效的液体消泡剂，用于乳胶漆。尤其适合用于苯乙烯/丁二烯乳胶和丙烯酸共聚物。已乳化于水中。可用于乳胶漆、水性涂料、硅酸盐涂料、胶粘剂和灰泥 | |
| SCHWEGO® Foam 8325 | Bernd Schwegmann GmbH & Co. KG | Schwego® Foam 8325是一种液体、高效消泡剂，适用于所有乳胶漆，特别是基于苯乙烯/丁二烯乳胶和丙烯酸共聚物的乳胶漆。Schwego® Foam 8325在水中易乳化，不含硅 | |
| SCHWEGO® Foam 8333 | Bernd Schwegmann GmbH & Co. KG | Schwego® Foam 8333特别适用于基于聚氨酯、聚酯及其混合体系的消泡。它可有效用作消泡剂和脱气剂。Schwego® Foam 8333不含硅 | |
| SCHWEGO® Foam 8336 | Bernd Schwegmann GmbH & Co. KG | Schwego® Foam 8336消泡剂，适用于所有类型的涂料，不含颜料或者仅含少量颜料、印刷油墨和UV固化体系，特别是含丙烯酸的体系。在木器清漆和胶粘剂中也具有非常好的消泡脱气效果 | |
| SCHWEGO FOAM EL 2013 | Bernd Schwegmann GmbH & Co. KG | SCHWEGO FOAM EL 2013是一种用于溶剂型涂料系统的消泡剂。它可以减少表面张力，所以可以在多数溶剂型系统中显示高消泡能力。它可以在生产和应用过程中破坏泡沫。小量使用SCHWEGO FOAM EL 2013就可以防止泡沫在烤瓷和烘漆过程中产生。这款产品几乎适用于所有溶剂型系统，罐头涂料，醇酸树脂（风干），醇酸树脂/聚酯（热烘干），氯化橡胶，环氧化物，聚氨酯，热塑性丙烯酸和反应性丙烯酸树脂系统。 | |
| SCHWEGO® Mar 6542 | Bernd Schwegmann GmbH & Co. KG | 滑爽助剂，用于水性和UV固化涂料体系，润湿助剂。可改善抗划伤、耐磨损性能和防粘连性能。也可改善滑爽度，形成平滑表面，从而提高涂膜硬度 | |
| SCHWEGO® Mar 6561 | Bernd Schwegmann GmbH & Co. KG | Schwego® Mar 6561添加剂，应用于UV涂料，可改善耐磨损和抗刮伤性能，增加防粘连性能，改进滑爽度并增加硬度。此外，可改善UV体系的相容性。可减少灰尘粘附和起泡倾向。Schwego® Mar 6561不会影响光泽 | |
| SCHWEGO® Mar 6562 | Bernd Schwegmann GmbH & Co. KG | Schwego® Mar 6562添加剂，应用于UV涂料，可改善耐磨损和抗刮伤性能，增加防粘连性能，改进滑爽度并增加硬度。此外，可改善UV体系的相容性，增加重涂性。可减少灰尘粘附和起泡倾向。Schwego® Mar 6562不会影响光泽 | |
| SCHWEGO® Mar 8300 | Bernd Schwegmann GmbH & Co. KG | Schwego® Mar 8300主要用于常规自干和烘干漆。因为其组分，Schwego® Mar 8300可用于大部分基料体系。有时与含羟基的基料会不相容 | |
| SCHWEGO® Mar 8301 | Bernd Schwegmann GmbH & Co. KG | Schwego® Mar 8301主要用于自干和烘烤水稀释涂料。Schwego® Mar 8301在常规涂料体系中也具有良好的作用。因为其组分，Schwego® Mar 8301可用于大部分基料体系 | |
| SCHWEGO® Mar 8304 | Bernd Schwegmann GmbH & Co. KG | Schwego® Mar 8304适用于溶剂型体系，基料类型：自干醇酸、醇酸/三聚氰胺组合、聚氨酯、硝化纤维、酸固化三聚氰胺和尿素体系、无油聚酯 | |
| SCHWEGO® Mar 8305 | Bernd Schwegmann GmbH & Co. KG | Schwego® Mar 8305适用于水稀释体系，基料类型：自干醇酸、醇酸/三聚氰胺组合、自交联和添加剂交联聚丙烯酸树酯、聚氨酯、硝化纤维体系、酸硬化蜜胺和尿素树脂、无油聚酯 | |
| SCHWEGO® Mar 8310 | Bernd Schwegmann GmbH & Co. KG | 滑爽和流平助剂，用于水性涂料体系。可改善滑爽度，形成均一表面，从而提高涂膜硬度。可减小粘灰可能性，减小气泡形成，保持光泽 | |
| SCHWEGO® Mar 8311 | Bernd Schwegmann GmbH & Co. KG | SCHWEGO® Mar 8311 is a slip and leveling additive for solvent borne coating systems. The addition of this product to solvent borne coating systems improves scratch, mar and blocking resistance. SCHWEGO® Mar 8311 improves slip, therefore even surface is fo...展开 SCHWEGO® Mar 8311 is a slip and leveling additive for solvent borne coating systems. The addition of this product to solvent borne coating systems improves scratch, mar and blocking resistance. SCHWEGO® Mar 8311 improves slip, therefore even surface is formed and hence also film hardness increased. The tendency to dirt retention is diminished, disposition to foaming is reduced and gloss is conserved. 收起 | |
| SCHWEGO® Pur 8020 | Bernd Schwegmann GmbH & Co. KG | Schwego® Pur 8020适用于内墙和外墙涂料，也可用于基于聚丙烯酸、苯乙烯共聚物、PU乳液或水稀释醇酸体系的合成树脂打底和涂抹化合物或浆状填料。与丙烯酸或纤维素基增稠剂相比，它具有高保光性，尤其在高光乳胶漆中 | |
| SCHWEGO® Pur 8050 | Bernd Schwegmann GmbH & Co. KG | Schwego® Pur 8050适用于内部和外部砖石漆、水性涂料和防腐蚀涂料、改性树脂灰泥和填料。与丙烯酸和纤维素基增稠剂相比，它在高光乳胶漆中具有高保光性 | |
| SCHWEGO® therm | Bernd Schwegmann GmbH & Co. KG | SCHWEGO® therm 是一种用于溶剂型涂料体系的湿润添加剂。在涂料体系中添加这款产品可以在增加涂膜指甲硬度的同时减少烘干时间或者降低烘干温度等。SCHWEGO® therm提供更经济，更高质量的加工过程。这款产品可用于多种溶剂型系统，如金属饰面和木饰面。 | |
| SCHWEGO® Wett 6237 | Bernd Schwegmann GmbH & Co. KG | Schwego® Wett 6237可用于所有类型水稀释体系，例如：乳液、乳胶、混合体系、中和体系、适用于有机和无机颜料 | |
| SCHWEGO® Wett 6242 | Bernd Schwegmann GmbH & Co. KG | Schwego® Wett 6242可用于分散无机和有机颜料或炭黑。特别适用于通用色浆和高填充体系的制备 | |
| SCHWEGO® Wett 6246 | Bernd Schwegmann GmbH & Co. KG | Schwego® Wett 6246 是一款通用润湿和分散助剂，适用于溶剂基和不含树脂的体系。可以用于分散有机或无机颜料以及颜料浓缩浆。 | |
| SCHWEGO® Wett 6247 | Bernd Schwegmann GmbH & Co. KG | Schwego® Wett 6247 是一款通用润湿和分散助剂，适用于溶剂基和不含树脂的体系。可以用于分散有机或无机颜料以及颜料浓缩浆。 | |
| SCHWEGO® wett 6248 | Bernd Schwegmann GmbH & Co. KG | SCHWEGO® WETT 6248是一种润湿分散剂，用于溶剂型和不含树脂的体系。它适合有机和无机颜料以及颜料浓缩浆的分散。该产品可减少分散时间、色彩强度，减少沉降，并增加光泽度。它也可减少浮色，提高流平性，并具有出色的相容性。 SCHWEGO® WETT 6248特别适用于搪瓷和工业、木材、家具涂料和颜料预备物。推荐用于颜料预备物。 | |
| SCHWEGO® wett 6249 | Bernd Schwegmann GmbH & Co. KG | SCHWEGO® WETT 6249是一款通用润湿分散剂，用于溶剂型和不含树脂的体系。 SCHWEGO® WETT 6249适合有机和无机颜料以及颜料浓缩浆的分散。本产品特别适用于搪瓷和工业、木材、家具涂料和颜料预备物。推荐用于颜料预备物。 | |
| SCHWEGO® Wett 6260 | Bernd Schwegmann GmbH & Co. KG | Schwego® Wett 6260可用于分散无机和有机颜料或炭黑，特别适用于制备UV涂料 | |
| SCHWEGO® Wett 6264 | Bernd Schwegmann GmbH & Co. KG | 溶剂型涂料体系的润湿和分散助剂。可用于分散无机和有机颜料或炭黑。它尤其适合用于制备通用型浆体和高填料份体系 | |
| SCHWEGO® Wett 6267 | Bernd Schwegmann GmbH & Co. KG | 通用型润湿分散剂，用于溶剂型、无溶剂和无树脂体系。适合用于无机和有机颜料以及颜料浓缩物的分散 | |
| SCHWEGO® Wett 6290 | Bernd Schwegmann GmbH & Co. KG | Schwego® Wett 6290可用于高品质水稀释涂料体系中分散所有类型的无机和有机颜料。Schwego® Wett 6290特别适用于基于乙二醇的通用色浆或颜料色浆。Schwego® Wett 6290不会影响产品的耐腐蚀性能 | |
| SCHWEGO® Wett 6292 | Bernd Schwegmann GmbH & Co. KG | Schwego® Wett 6292可用于分散无机、有机颜料或炭黑。特别适用于制备通用色浆和高填充体系 | |
| SCHWEGO® Wett 6293 | Bernd Schwegmann GmbH & Co. KG | Schwego® Wett 6293是一款润湿和分散助剂。普遍适用于水性涂料体系的颜料分散。因为可以防止颜料结块因此提高了效率，大大缩短了球磨时间。同时，由于颜料的沉降和不良分散而导致的浮色发花也被避免。颜料颜色的强度提高，即使长期储存，色光也不会改变。 | |
| SCHWEGO® Wett 6294 | Bernd Schwegmann GmbH & Co. KG | 可控制涂料体系在颜料/基料界面的稳定性。在分散工艺中促进原始颗粒的形成，防止再聚集。具有出色的分散性能，适合用于高固含或高PVC体系中有机和无机颜料的分散 | |
| SCHWEGO® Wett 6295 | Bernd Schwegmann GmbH & Co. KG | 可控制涂料体系在颜料/基料界面的稳定性。在分散工艺中促进原始颗粒的形成，防止再聚集。具有出色的分散性能，适合用于高固体份或高PVC体系中有机和无机颜料的分散 | |
| SCHWEGO® Wett 6296 | Bernd Schwegmann GmbH & Co. KG | 可控制涂料体系在颜料/基料界面的稳定性。在分散工艺中促进原始颗粒的形成，防止再聚集。对白色和无机颜料具有出色的分散性能，适合用于填料分散 | |
| SCHWEGO® Wett 6297 | Bernd Schwegmann GmbH & Co. KG | Schwego® Wett 6297 是一款润湿和分散助剂。普遍适用于水性涂料体系的颜料分散。因为可以防止颜料结块因此提高了效率，大大缩短了球磨时间。同时，由于颜料的沉降和不良分散而导致的浮色发花也被避免。颜料颜色的强度提高，即使长期储存，色光也不会改变。 | |
| SCHWEGO® Wett 6298 | Bernd Schwegmann GmbH & Co. KG | Schwego® Wett 6298 是一款润湿和分散助剂。普遍适用于水性涂料体系的颜料分散。因为可以防止颜料结块因此提高了效率，缩短了球磨时间。同时，由于颜料的沉降和不良分散而导致的浮色发花也被避免。颜料颜色的强度提高，即使长期储存，色光也不会改变。 | |
| SCHWEGO® Wett 8075 | Bernd Schwegmann GmbH & Co. KG | Schwego® Wett 8075可用于常规和水稀释体系。Schwego® Wett 8075 适用于几乎所有类型的涂料 | |
| SCHWEGO® Wett 8076 | Bernd Schwegmann GmbH & Co. KG | Schwego® Wett 8076可添加到含溶剂或可用溶剂稀释的涂料体系。Schwego® Wett 8076不适用于水稀释体系 | |
| SCHWEGO® Wett 8079 | Bernd Schwegmann GmbH & Co. KG | Schwego® Wett 8079可用于高品质水稀释涂料体系中分散所有类型的无机和有机颜料。它适用于制备通用色浆 | |
| SCHWEGO® Wett 8081 | Bernd Schwegmann GmbH & Co. KG | 两种添加剂都适用于所有常规工业涂料。Schwego® Wett 8081尤其适用于醇酸、单组分环氧体系和颜料色浆。Schwego® Wett 8082非常适用于DD油漆和双组分环氧体系。它们通常不能用于自干丙烯酸。未见干扰其它油漆性能 | |
| SCHWEGO® Wett 8082 | Bernd Schwegmann GmbH & Co. KG | 两种助剂几乎适合所有常规工业涂料。Schwego® Wett 8081尤其适合醇酸树脂、单组份环氧体系和颜料浆体。Schwego® Wett 8082非常适合用于DD油漆和双组份环氧体系。它们通常不能用于自干丙烯酸。与油漆其它性能之间的相互影响尚不知晓 | |
| SCHWEGO® Wett 8083 | Bernd Schwegmann GmbH & Co. KG | Schwego® Wett 8083几乎适用于所有常规工业漆。特别适用于苯胺油墨。未见干扰其它油漆性能 | |
| SCHWEGO® Wett 8085 | Bernd Schwegmann GmbH & Co. KG | Schwego® Wett 8085 是一款乳化剂，能可观地改善通用色浆在溶剂基涂料体系的复配性。因此涂料的浮色、发花及絮凝现象可大大减少。该产品可以改善rub-out（指研法）,和大多数溶剂有很好地相容性。 | |
| SCHWEGO® Wett 8092 | Bernd Schwegmann GmbH & Co. KG | Schwego® Wett 8092可用于分散无机和有机颜料或炭黑。特别适用于制备通用色浆和高填充体系 | |
| SCHWEGO® Wett 8319 | Bernd Schwegmann GmbH & Co. KG | Schwego® Wett 8319适用于几乎所有类型的涂料。有时会发生不相容，但是极少见。Schwego® Wett 8319 可用于所有常规和水性涂料体系 | |
| SCHWEGO® Wett 8320 | Bernd Schwegmann GmbH & Co. KG | Schwego® Wett 8320作为颜料色浆的润湿剂和分散剂非常有效，水性，不含基料和溶液。Schwego® Wett 8320可优化流平性，即使是高着色体系也可。用于水性漆，可获得非常高的光泽和超高的着色力。用于水性醇酸、聚酯树脂和聚氨酯乳液效果特别好 | |
| SCHWEGO® Wett 8321 | Bernd Schwegmann GmbH & Co. KG | 该产品可用于几乎所有的水性快干漆体系，甚至自干清漆和烤漆。它易应用于水性双组分PUR体系，因为Schwego® Wett 8321不会影响储存时间。未见对其它油漆性能的负面影响 | |
| Scientific Boiled Linseed Oil | ADM | Scientific Boiled Linseed Oil, in the form of amber clear liquid, is a raw linseed oil with cobalt and manganese dryers with a specific gravity of 0.93 at 25°C. It has recommended applications in anti-spalling compounds and paints (drying time 6-16 hours)...展开 Scientific Boiled Linseed Oil, in the form of amber clear liquid, is a raw linseed oil with cobalt and manganese dryers with a specific gravity of 0.93 at 25°C. It has recommended applications in anti-spalling compounds and paints (drying time 6-16 hours). 收起 | |
| Scientific Double Boiled Linseed Oil | ADM | Scientific Double Boiled Linseed Oil, in the form of amber clear liquid, is a raw linseed oil with cobalt and manganese dryers with a specific gravity of 0.93 at 25°C. It has recommended applications in anti-spalling compounds, carbon electrodes, and pain...展开 Scientific Double Boiled Linseed Oil, in the form of amber clear liquid, is a raw linseed oil with cobalt and manganese dryers with a specific gravity of 0.93 at 25°C. It has recommended applications in anti-spalling compounds, carbon electrodes, and paints (drying time 8 hours). 收起 | |
| Sodium Ethyl Xanthate | Hainan Zhongxin Chemical Co., Ltd. | Sodium Ethyl Xanthate is an organosulfur compound with the chemical formula CH3CH2OCS2Na and is a pale yellow powder that is 90% pure. It is primarily used in the mining industry as a flotation agent for the recovery metals. Sodium Ethyl Xanthate has othe...展开 Sodium Ethyl Xanthate is an organosulfur compound with the chemical formula CH3CH2OCS2Na and is a pale yellow powder that is 90% pure. It is primarily used in the mining industry as a flotation agent for the recovery metals. Sodium Ethyl Xanthate has other applications as an additive to paints and rubber to protect it against oxidation. 收起 | |
| Sodium Hypophosphite | Hainan Zhongxin Chemical Co., Ltd. | Sodium Hypophosphite is a white crystalline powder with the molecular formula NaH2PO2.H2O. It is used as a chemical plating agent in the surface metalization of objects that could not be done through electroplating or parts that have high precision requir...展开 Sodium Hypophosphite is a white crystalline powder with the molecular formula NaH2PO2.H2O. It is used as a chemical plating agent in the surface metalization of objects that could not be done through electroplating or parts that have high precision requirements on properties. 收起 | |
| Special Raw Linseed Oil | ADM | Special Raw Linseed Oil is slightly oxidized, rapid bodying, and will not break at varnish kettle temperatures. It imparts good gloss and flow to paints and has applications in grinding oils, vehicles, and printing inks. | |
| Superb Linseed Oil | ADM | Superb Linseed Oil, in the form of amber clear liquid, is fully alkali refined, dewaxed, and bleached oil that will not break at varnish kettle temperatures and bleaches water white on heating. It has applications in fast-drying and high quality varnishes...展开 Superb Linseed Oil, in the form of amber clear liquid, is fully alkali refined, dewaxed, and bleached oil that will not break at varnish kettle temperatures and bleaches water white on heating. It has applications in fast-drying and high quality varnishes, resins, enamel vehicles, epoxidation, and printing inks. 收起 | |
| Synpol 1001 | Synpol Products PVT. Ltd | Synpol 1001 is a butylated UF amino resin. This product has a non-volatile compound content of 63-67% and a density at 25°C of 1.03-1.05 g/cm3. Synpol 1001 is most commonly used in general purpose baking enamel applications. | |
| Synpol 105X | Synpol Products PVT. Ltd | Synpol 105X is a reactive polyamide resin. This product has a density at 25°C of 0.96-0.98 g/cm3 and a non-volatile compound content of 58-62%. Synpol 105X is most commonly used as a hardener in solvent-based epoxy coating applications. | |
| Synpol 115 | Synpol Products PVT. Ltd | Synpol 115 is a reactive polyamide resin. This product has a density at 25°C of 0.97-0.98 g/cm3. Synpol 115 is most commonly used as a hardener in protective and decorative coating applications. | |
| Synpol 115 (70% in Xylene) | Synpol Products PVT. Ltd | Synpol 115 (70% in Xylene) is a reactive polyamide resin. This product has a density at 25°C of 0.94-0.95 g/cm3 and a non-volatile compound content of 68-72%. Synpol 115 (70% in Xylene) is most commonly used as a hardener in protective and decorative coa...展开 Synpol 115 (70% in Xylene) is a reactive polyamide resin. This product has a density at 25°C of 0.94-0.95 g/cm3 and a non-volatile compound content of 68-72%. Synpol 115 (70% in Xylene) is most commonly used as a hardener in protective and decorative coating applications. 收起 | |
| Synpol 130 | Synpol Products PVT. Ltd | Synpol 130 is a reactive polyamide resin. This product has a density at 25°C of 1.03-1.04 g/cm3 and a non-volatile compound content of 68-72%. Synpol 130 is most commonly used as a hardener in water-emulsifiable epoxy coating applications. | |
| Synpol 140 | Synpol Products PVT. Ltd | Synpol 140 is a reactive polyamide resin. This product has a density at 25°C of 0.96-0.98 g/cm3. Synpol 140 is most commonly used as a hardener in solvent-free coating, adhesive, and lamination applications. | |
| Synpol 150 | Synpol Products PVT. Ltd | Synpol 150 is a reactive polyamide resin. This product has a density at 25°C of 0.975-0.985 g/cm3. Synpol 150 is most commonly used as a hardener in solvent-free coating, adhesive, and lamination applications. | |
| Synpol 160 | Synpol Products PVT. Ltd | Synpol 160 is a reactive polyamide resin. This product has a density at 25°C of 0.94-0.96 g/cm3. Synpol 160 is most commonly used as a hardener in solvent-free coating, adhesive, and lamination applications. | |
| Synpol 160 LP | Synpol Products PVT. Ltd | Synpol 160 LP is a reactive polyamide resin. This product has a density at 25°C of 0.92-0.94 g/cm3. Synpol 160 LP is most commonly used as a hardener in solvent-free coating applications. | |
| Synpol 1800 | Synpol Products PVT. Ltd | Synpol 1800 is a bisphenol A-based, unmodified plasticizer. This product has a density of 1.17-1.19 g/cm3 and a melting point of 125-135ºC. Synpol 1800 is most commonly used in thermosetting bake finish and chemical-resistant container coating application...展开 Synpol 1800 is a bisphenol A-based, unmodified plasticizer. This product has a density of 1.17-1.19 g/cm3 and a melting point of 125-135ºC. Synpol 1800 is most commonly used in thermosetting bake finish and chemical-resistant container coating applications. 收起 | |
| Synpol 200 | Synpol Products PVT. Ltd | Synpol 200 is a bisphenol A-based, unmodified epoxy resin. This product has a viscosity at 25°C of 120-160 Poises. Synpol 200 is most commonly used in coating, lamination, and adhesive applications. | |
| Synpol 2080 | Synpol Products PVT. Ltd | Synpol 2080 is a coconut fatty acid-modified epoxy ester. This product has a density of 0.97-0.98 g/cm3. Synpol 2080 is most commonly used in clear and pigmented electronic and appliance finish applications. | |
| Synpol 210 | Synpol Products PVT. Ltd | Synpol 210 is a bisphenol A-based, unmodified reactive diluent. This product has a viscosity at 25°C of 180-210 Poises. Synpol 210 is most commonly used in coating, lamination, and adhesive applications. | |
| Synpol 220 | Synpol Products PVT. Ltd | Synpol 220 is a bisphenol A-based, unmodified reactive diluent. This product has a viscosity at 25°C of 180-200 Poises. Synpol 220 is most commonly used in coating, lamination, and adhesive applications. | |
| Synpol 230 | Synpol Products PVT. Ltd | Synpol 230 is a bisphenol A-based, unmodified plasticizer. This product has a viscosity at 25°C of 230-250 Poises. Synpol 230 is most commonly used in coating, lamination, and adhesive applications. | |
| Synpol 280 | Synpol Products PVT. Ltd | Synpol 280 is a bisphenol A-based, unmodified epoxy resin. This product has a density of 1.18-1.19 g/cm3. Synpol 280 is most commonly used in high-solids coating, adhesive, and lamination applications. | |
| Synpol 280 | Synpol Products PVT. Ltd | Synpol 280 is a bisphenol A-based, unmodified plasticizer. This product has a density of 1.22-1.24 g/cm3. Synpol 280 is most commonly used in heat-resistant laminate, electrical casting, adhesive, and coating applications. | |
| Synpol 4000 | Synpol Products PVT. Ltd | Synpol 4000 is a bisphenol A-based, unmodified plasticizer. This product has a density of 1.18-1.19 g/cm3 and a melting point of 145-155ºC. Synpol 4000 is most commonly used in thermosetting bake finish and chemical-resistant container coating application...展开 Synpol 4000 is a bisphenol A-based, unmodified plasticizer. This product has a density of 1.18-1.19 g/cm3 and a melting point of 145-155ºC. Synpol 4000 is most commonly used in thermosetting bake finish and chemical-resistant container coating applications where increased substrate adhesion is required. 收起 | |
| Synpol 450XX | Synpol Products PVT. Ltd | Synpol 450XX is a bisphenol A-based, unmodified epoxy resin. This product has a density of 1.07-1.09 g/cm3. Synpol 450XX is most commonly used in chemical-resistant, air-dry, and bake coating applications. | |
| Synpol 5545 | Synpol Products PVT. Ltd | Synpol 5545 is a linseed fatty acid-modified epoxy ester. This product has a density of 0.92-0.93 g/cm3. Synpol 5545 is most commonly used in air-drying maintenance finish applications. | |
| Synpol 6040 | Synpol Products PVT. Ltd | Synpol 6040 is a soya fatty acid-modified epoxy ester. This product has a density of 0.96-0.97 g/cm3. Synpol 6040 is most commonly used in clear and pigmented electronic and appliance finish applications. | |
| Synpol 900 | Synpol Products PVT. Ltd | Synpol 900 is a bisphenol A-based, unmodified epoxy resin. This product has a density of 1.18-1.19 g/cm3 and a melting point 95-105ºC. Synpol 900 is most commonly used in air-dry and bake finish, as well as powder coating applications. | |
| Synpol AT-67 | Synpol Products PVT. Ltd | Synpol AT-67 is an acrylic copolymer solution. This product has a density of 1.02-1.03 g/cm3 and a total non-volatile content of 56-60%. Synpol AT-67 is most commonly used in high-performance coating applications. | |
| Synpol AT-68 | Synpol Products PVT. Ltd | Synpol AT-68 is an acrylic copolymer solution. This product has a density of 1.01-1.03 g/cm3 and a total non-volatile content of 58-62%. Synpol AT-68 is most commonly used in flexible paint applications. | |
| Synpol AT-70 | Synpol Products PVT. Ltd | Synpol AT-70 is an acrylic copolymer solution. This product has a density of 0.98-0.99 g/cm3 and a total non-volatile content of 58-62%. Synpol AT-70 is most commonly used in metal finish applications. | |
| Synpol B-10 | Synpol Products PVT. Ltd | Synpol B-10 is a thermoplastic homopolymer acrylic resin solution. This product has a density of 0.98-0.99 g/cm3 and a total non-volatile content of 38-42%. Synpol B-10 is most commonly used in screen printing, vinyl coating, plastic coating, gravure pr...展开 Synpol B-10 is a thermoplastic homopolymer acrylic resin solution. This product has a density of 0.98-0.99 g/cm3 and a total non-volatile content of 38-42%. Synpol B-10 is most commonly used in screen printing, vinyl coating, plastic coating, gravure printing ink, and PVC coating primer applications. 收起 | |
| Synpol B-30 | Synpol Products PVT. Ltd | Synpol B-30 is a polyvinyl butyral resin in a clear water white-colored, free flowing, granular form. This product has a density at 25°C of 1.05-1.15 g/cm3. Synpol B-30 is most commonly used in metal, textile, paper and foil coating, thermosetting and h...展开 Synpol B-30 is a polyvinyl butyral resin in a clear water white-colored, free flowing, granular form. This product has a density at 25°C of 1.05-1.15 g/cm3. Synpol B-30 is most commonly used in metal, textile, paper and foil coating, thermosetting and hot-melt adhesive, wood finish, and printing ink applications. 收起 | |
| Synpol B-60 | Synpol Products PVT. Ltd | Synpol B-60 is a polyvinyl butyral resin in a clear water white-colored, free flowing, granular form. This product has a density at 25°C of 1.05-1.15 g/cm3 and a softening point of 51-55°C. Synpol B-60 is most commonly used in metal, textile, paper and ...展开 Synpol B-60 is a polyvinyl butyral resin in a clear water white-colored, free flowing, granular form. This product has a density at 25°C of 1.05-1.15 g/cm3 and a softening point of 51-55°C. Synpol B-60 is most commonly used in metal, textile, paper and foil coating, thermosetting and hot-melt adhesive, wood finish, and printing ink applications. 收起 | |
| Synpol B-722 | Synpol Products PVT. Ltd | Synpol B-722 is a thermoplastic homopolymer acrylic resin solution. This product has a density of 0.99-1.00 g/cm3 and a total non-volatile content of 48-52%. Synpol B-722 is most commonly used in acrylic lacquer, wood lacquer, ink, and PVC coating appli...展开 Synpol B-722 is a thermoplastic homopolymer acrylic resin solution. This product has a density of 0.99-1.00 g/cm3 and a total non-volatile content of 48-52%. Synpol B-722 is most commonly used in acrylic lacquer, wood lacquer, ink, and PVC coating applications. 收起 | |
| Synpol B-723 | Synpol Products PVT. Ltd | Synpol B-723 is a thermoplastic homopolymer acrylic resin solution. This product has a density of 0.95-0.96 g/cm3 and a total non-volatile content of 38-42%. Synpol B-723 is most commonly used in metal, vinyl, and plastic coating, as well as aluminium l...展开 Synpol B-723 is a thermoplastic homopolymer acrylic resin solution. This product has a density of 0.95-0.96 g/cm3 and a total non-volatile content of 38-42%. Synpol B-723 is most commonly used in metal, vinyl, and plastic coating, as well as aluminium lacquer applications. 收起 | |
| Synpol BG-40 | Synpol Products PVT. Ltd | Synpol BG-40 is a butylated UF amino resin. This product has a non-volatile compound content of 72-76% and a density at 25°C of 1.01-1.03 g/cm3. Synpol BG-40 is most commonly used in high-gloss stoving enamel applications. | |
| Synpol L-9 | Synpol Products PVT. Ltd | Synpol L-9 is a butylated phenolic formaledyde resin. This product has a density of 0.98-0.99 g/cm3 and a total non-volatile content of 58-62%. Synpol L-9 is most commonly used in etch primer, adhesive, insulating varnish, and wire enamel applications. | |
| Synpol L-97 | Synpol Products PVT. Ltd | Synpol L-97 is a butylated phenolic formaldehyde resin. This product has a density of 0.98-0.99 g/cm3 and a total non-volatile content of 58-62%. Synpol L-97 is most commonly used in etch primer, adhesive, insulating varnish, and wire enamel applications. | |
| Synpol M-70 | Synpol Products PVT. Ltd | Synpol M-70 is a butylated MF amino resin. This product has a non-volatile compound content of 68-72% and a density at 25°C of 1.01-1.03 g/cm3. Synpol M-70 is most commonly used in flexible lacquer applications. | |
| Synpol MF-268 | Synpol Products PVT. Ltd | Synpol MF-268 is a butylated MF amino resin. This product has a non-volatile compound content of 58-62% and a density at 25°C of 1.01-1.03 g/cm3. Synpol MF-268 is most commonly used in stoving enamel applications. | |
| Synpol MF-310 | Synpol Products PVT. Ltd | Synpol MF-310 is a butylated MF amino resin. This product has a non-volatile compound content of 58-62% and a density at 25°C of 1.01-1.03 g/cm3. Synpol MF-310 is most commonly used in high-gloss enamel applications. | |
| Synpol PR-10/B | Synpol Products PVT. Ltd | Synpol PR-10/B is an alkyl phenol formaldehyde thermosetting resin in a pale yellow solid form. This product is most commonly used in spar varnish, marine finish, wood varnish, rubber-based adhesive, and electrical insulating varnish applications. | |
| Synpol SK-10 | Synpol Products PVT. Ltd | Synpol SK-10 is a ketone formaldehyde resin. This product has a hydroxyl value of 250-320 mgKOH/g. Synpol SK-10 is most commonly used in NC lacquer, printing ink, and surface coating applications. | |
| Synpol US-8 | Synpol Products PVT. Ltd | Synpol US-8 is a butylated UF amino resin. This product has a non-volatile compound content of 58-60% and a density at 25°C of 1.01-1.03 g/cm3. Synpol US-8 is most commonly used in wood lacquer applications. | |
| Talc Powder DY1 | Hainan Zhongxin Chemical Co., Ltd. | Talc Powder DY1, synonymous with hydrous magnesium silicate (H2Mg3O12Si4), is a paint grade fine white powder with a mesh size of 325MESH. It is primarily used in the production of paint and coatings. | |
| Talc Powder DY2 | Hainan Zhongxin Chemical Co., Ltd. | Talc powder DY2, synonymous with hydrous magnesium silicate (H2Mg3O12Si4), is a fine white powder with a mesh size of 800MESH. It is paint grade and primarily used in the production of paint and coatings. | |
| Talc Powder DY3 | Hainan Zhongxin Chemical Co., Ltd. | Talc powder DY3, synonymous with hydrous magnesium silicate (H2Mg3O12Si4), is a fine white powder with a mesh size of 800MESH. It is paint grade and primarily used in the production of paint and coatings. | |
| Tetra Potassium Pyrophosphate (TKPP) | Hainan Zhongxin Chemical Co., Ltd. | Tetra Potassium Pyrophosphate (TKPP) is a water insoluble white powder with a minimum content of 96% K4P2O7. It is primarily used as an additive in the electroplating industry, this product has other uses including dying. | |
| Tetrabromobisphenol A Bis-(2,3-Dibromopropyl Ether) | Hainan Zhongxin Chemical Co., Ltd. | Tetrabromobisphenol A bis-(2,3-dibromopropyl ether), Synonymous with BDDP:2,2-Bis[4-(2,3-Dibromopropoxy)-3,5-Dibromophenyl]Propane, is a white powder that has a minimum Br content of 67%. It is primarily used as a flame retardant in paints and plastics. T...展开 Tetrabromobisphenol A bis-(2,3-dibromopropyl ether), Synonymous with BDDP:2,2-Bis[4-(2,3-Dibromopropoxy)-3,5-Dibromophenyl]Propane, is a white powder that has a minimum Br content of 67%. It is primarily used as a flame retardant in paints and plastics. Tetrabromobisphenol A bis-(2,3-dibromopropyl ether) can also be used as an additive in EPS, PS, SAN, PO and PP. 收起 | |
| Tetrabromobisphenol S BIS-(2,3-Dibromopropyl Ether) | Hainan Zhongxin Chemical Co., Ltd. | Tetrabromobisphenol S BIS-(2,3-Dibromopropyl Ether) is a white powder that has a minimum of 64% Br. It is primarily used as a flame retardant additive in paints and plastic with it has better stability than BDDP. It is recommended for use in PP, PE, PS, A...展开 Tetrabromobisphenol S BIS-(2,3-Dibromopropyl Ether) is a white powder that has a minimum of 64% Br. It is primarily used as a flame retardant additive in paints and plastic with it has better stability than BDDP. It is recommended for use in PP, PE, PS, ABS resin and rubber. 收起 | |
| Tetrabromophthalic Anhydride (TBPA) | Hainan Zhongxin Chemical Co., Ltd. | Tetrabromophthalic Anhydride (TBPA) is a white or light yellow powder with a minimum of 67% BR. It is primarily used as a flame retardant additive and has a high bromine content. It is used in the production of elastomers, wire & cable, textile coatings,...展开 Tetrabromophthalic Anhydride (TBPA) is a white or light yellow powder with a minimum of 67% BR. It is primarily used as a flame retardant additive and has a high bromine content. It is used in the production of elastomers, wire & cable, textile coatings, business machines and television cabinets and is particularly effective in polyolefins, styrenic, polyamide, HIPS and polyester resins. 收起 |
