UL Prospector

成功!

成功保存搜索结果
ASKOCOAT™ 420 500 ASK Chemicals ASKOCOAT™ 420 is a modified phenolic resin formulation with natural oils. ASKOCOAT™ 500 is a modified isocyanate formulation. Both products are especially designed for fertilizer coatings to achieve controlled release properties.
ASKOCOAT™ 420 520 ASK Chemicals ASKOCOAT™ 420 is a modified phenolic resin formulation with natural oils. ASKOCOAT™ 520 is a modified isocyanate formulation. Both products are especially designed for fertilizer coatings to achieve controlled release properties.
ASKODRY 2210 ASK Chemicals ASKODRY 2210 is an excellent siccatives for waterborne oxidative drying alkyd resin systems, for example NECOWEL alkyd emulsions from ASK Chemicals GmbH. It is easy to emulsify in water and its special APEO-free emulsifier combination provides easy incorp...展开 ASKODRY 2210 is an excellent siccatives for waterborne oxidative drying alkyd resin systems, for example NECOWEL alkyd emulsions from ASK Chemicals GmbH. It is easy to emulsify in water and its special APEO-free emulsifier combination provides easy incorporation and good drying stability. The addition is made during the letdown phase. 收起
ASKODRY 2216 ASK Chemicals ASKODRY 2216 is an excellent siccatives for waterborne oxidative drying alkyd resin systems, for example NECOWEL alkyd emulsions from ASK Chemicals GmbH. It is easy to emulsify in water and its special APEO-free emulsifier combination provides easy incorp...展开 ASKODRY 2216 is an excellent siccatives for waterborne oxidative drying alkyd resin systems, for example NECOWEL alkyd emulsions from ASK Chemicals GmbH. It is easy to emulsify in water and its special APEO-free emulsifier combination provides easy incorporation and good drying stability. The addition is made during the letdown phase. 收起
ASKOFEN 295 E 60 ASK Chemicals ASKOFEN 295 E 60 is a low viscous phenol resol which is especially designed for impregnation textiles for reinforcements and special papers for friction materials. Due to the excellent penetration behavior materials with high thickness and density are imp...展开 ASKOFEN 295 E 60 is a low viscous phenol resol which is especially designed for impregnation textiles for reinforcements and special papers for friction materials. Due to the excellent penetration behavior materials with high thickness and density are impregnated homogeneously without contour scaling. ASKOFEN 295 E 60 is unlimited dilutable with ethanol, the solid content can be adjusted during the impregnation process. 收起
ASKOFEN 779 W 50 ASK Chemicals ASKOFEN 779 W 50 is a liquid, aqueous resorcinol-formaldehyde resin. ASKOFEN 779 W 50 is used to formulate RFL (Resorcinol–Formaldehyde–Latex) in combination with Latex like SB or preferably with styrene, butadiene, vinylpyridine latex. RFLs are used as a...展开 ASKOFEN 779 W 50 is a liquid, aqueous resorcinol-formaldehyde resin. ASKOFEN 779 W 50 is used to formulate RFL (Resorcinol–Formaldehyde–Latex) in combination with Latex like SB or preferably with styrene, butadiene, vinylpyridine latex. RFLs are used as adhesion promoters in the rubber industry to increase textile rubber adhesion. 收起
ASKOFEN R 9500 ASK Chemicals ASKOFEN R 9500 is a relatively high molecular weight resol with good compatibility to different resin systems. In combination with epoxy systems ASKOFEN R 9500 provides excellent chemical resistance with exception of strong alkalines and relatively good e...展开 ASKOFEN R 9500 is a relatively high molecular weight resol with good compatibility to different resin systems. In combination with epoxy systems ASKOFEN R 9500 provides excellent chemical resistance with exception of strong alkalines and relatively good elasticity. The product is a heat-reactive resin with limited shelf life. Extended storage at high temperatures should be avoided to prolong the useful life of the resins. 收起
ASKOFEN R 9600 ASK Chemicals ASKOFEN R 9600 is a butylated phenol resol with good compatibility to different resin systems, e.g. epoxy or polyester resins. The phenol resin has a low formaldehyde content of less than 0.5%, coatings with a formaldehyde content of less than 0.1% can be...展开 ASKOFEN R 9600 is a butylated phenol resol with good compatibility to different resin systems, e.g. epoxy or polyester resins. The phenol resin has a low formaldehyde content of less than 0.5%, coatings with a formaldehyde content of less than 0.1% can be formulated. Coatings based on ASKOFEN R 9600 provide good adhesion, hardness and flexibility as well as excellent sterilization resistance and chemical resistance with exception of strong alkalines. This product is recommended as a crosslinker for epoxy and polyester resins for packaging coatings, and is also suitable for can and coil coatings. 收起
Alinco™ M-25 Linseed Oil ADM Alinco™ M-25 Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall finish...展开 Alinco™ M-25 Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall finishes, and more. 收起
Alinco™ Q Linseed Oil ADM Alinco™ Q Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall finishes,...展开 Alinco™ Q Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall finishes, and more. 收起
Alinco™ X Linseed Oil ADM Alinco™ X Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall finishes,...展开 Alinco™ X Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall finishes, and more. 收起
Alinco™ Y Linseed Oil ADM Alinco™ Y Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall finishes,...展开 Alinco™ Y Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall finishes, and more. 收起
Alinco™ Z Linseed Oil ADM Alinco™ Z Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall finishes,...展开 Alinco™ Z Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall finishes, and more. 收起
Alinco™ Z-1 Linseed Oil ADM Alinco™ Z-1 Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall finishe...展开 Alinco™ Z-1 Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall finishes, and more. 收起
Alinco™ Z-2 Linseed Oil ADM Alinco™ Z-2 Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall finishe...展开 Alinco™ Z-2 Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall finishes, and more. 收起
Alinco™ Z-3 Linseed Oil ADM Alinco™ Z-3 Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall finishe...展开 Alinco™ Z-3 Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall finishes, and more. 收起
Alinco™ Z-4 Linseed Oil ADM Alinco™ Z-4 Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall finishe...展开 Alinco™ Z-4 Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall finishes, and more. 收起
Alinco™ Z-5 Linseed Oil ADM Alinco™ Z-5 Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall finishe...展开 Alinco™ Z-5 Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall finishes, and more. 收起
Alinco™ Z-6 Linseed Oil ADM Alinco™ Z-6 Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall finishe...展开 Alinco™ Z-6 Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall finishes, and more. 收起
Alinco™ Z/2-Z/3 Linseed Oil ADM Alinco™ Z/2-Z/3 Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall fin...展开 Alinco™ Z/2-Z/3 Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall finishes, and more. 收起
Anhydrite Provencale S.A. Anhydrite is a filler that can withstand humidity. It is finely ground and dressed natural anhydrite that is a waterless sulphate. It is often formed as an evaporation product from sea water subject to progressive concentration of the salt water solution....展开 Anhydrite is a filler that can withstand humidity. It is finely ground and dressed natural anhydrite that is a waterless sulphate. It is often formed as an evaporation product from sea water subject to progressive concentration of the salt water solution. Anhydrite makes up the sturdy solid base of gypsum deposits and can be mined separately. It is for use in industrial paints, lacquers and adhesives. 收起
Anti-Spalling Compound ADM Anti-Spalling Compound, in the form of a semi viscous to viscous liquid, is a blend of scientific boiled linseed oil and mineral spirits. It has many applications, such as varnishes, paints, alkyd resins, hardboard, inks, coatings, and more.
Arobras™ 1065/I ASK Chemicals Arobras™ 1065/I is a urea-formaldehyde isobutyl resin, unmodified. As for the compatibility, it shows up with excellent pigment, and is good with alkyd resins and nitrocellulose.
Arobras™ 1767 ASK Chemicals Arobras™ 1767 is a thermosetting resin used for modifying alkyd resins. It has excellent compatibility with alkyd resins.
Arobras™ 1770 ASK Chemicals Arobras™ 1770 is a thermosetting resin used for modifying alkyd resins. It has excellent compatibility with alkyd resins.
Arobras™ 2002 ASK Chemicals Arobras™ 2002 is a hydroxylated alkyd resin recommended for varnishes and polyurethane paint. As for the compatibility, it is shown with good nitrocellulose and alkyd resins with short oil compatible with amino-resins.
Arobras™ 2060 ASK Chemicals Arobras™ 2060 is a pure alkyd resin, long in soybean oil. It has good compatibility with pigments , regular compatibility with protective oil and other resins, and is incompatible with nitrocellulose. It offers excellent gloss, superior spread and optimal...展开 Arobras™ 2060 is a pure alkyd resin, long in soybean oil. It has good compatibility with pigments , regular compatibility with protective oil and other resins, and is incompatible with nitrocellulose. It offers excellent gloss, superior spread and optimal drying. 收起
Arobras™ 2424 ASK Chemicals Arobras™ 2424 is a catalyst for polyurethane systems. It was developed for use as an accelerator of reaction.
Arobras™ 2570 ASK Chemicals Arobras™ 2570 is an accelerator-based oxidizing agents developed for the system based on alkyd oils and resins. Its formulation is balanced with all the necessary environment for drying or kiln agents. Variations in amount of Arobras™ 2570 offer different...展开 Arobras™ 2570 is an accelerator-based oxidizing agents developed for the system based on alkyd oils and resins. Its formulation is balanced with all the necessary environment for drying or kiln agents. Variations in amount of Arobras™ 2570 offer different drying time by increasing or decreasing the working time as needed. It is compatible with all alkyd-based oils. 收起
Arobras™ 5070/I ASK Chemicals Arobras™ 5070/I is a melamine-formaldehyde isobutyl resin for kiln-drying. As for the compatibility, it shows up with excellent pigment, good with alkyd resins, nitrocellulose with regular and is incompatible with oils.
Arobras™ 6120 ASK Chemicals Arobras™ 6120 is a pure alkyd drying resin, short in soybean oil. As for the compatibility, it shows up with excellent pigment, good with nitrocellulose and with regular oils.
Arobras™ 663 ASK Chemicals Arobras ™ 663 is a short phenolated alkyd resin in soya oil. As for the compatibility, it shows up with excellent pigment, good with chlorinated rubber and Amino resins and regular oils.
Arobras™ 8023 ASK Chemicals Arobras™ 8023 is a short alkyd resin with no protective oil (rice). It offers excellent features and good compatibility with nitrocellulose and amino-resins.
Arobras™ 8040 ASK Chemicals Arobras™ 8040 is a pure alkyd drying resin, short in soybean oil. As for the compatibility, it shows up with excellent pigment, good with nitrocellulose and with regular oils.
Arobras™ 8078 ASK Chemicals Arobras™ 8078 is a pure alkyd drying resin, short in soybean oil. As for the compatibility, it seems excellent with alkyd resins, pigments and other and with regular oils.
Arobras™ 8080 ASK Chemicals Arobras™ 8080 is an alkyd resin phenolated, short in soybean, great oil for paints and varnishes quick drying. As for the compatibility, it shows up with excellent pigment and good with nitrocellulose and alkyd resins.
Arobras™ 8081 ASK Chemicals Arobras™ 8081 is an alkyd resin phenolated, short in soybean, great oil for paints and varnishes quick drying. As for the compatibility, it shows up with excellent pigment and good with nitrocellulose and alkyd resins.
Arobras™ 8082 ASK Chemicals Arobras™ 8082 is a pure alkyd drying resin, short in soybean oil. As for the compatibility, it shows up with excellent pigment, good with nitrocellulose and with regular oils.
Arobras™ 9080 ASK Chemicals Arobras™ 9080 is a pure alkyd drying resin, average high solid soy oil. Shows good compatibility with other resins such as phenolated, short, medium, acrylated and regular, and compatibility with mineral oils.
Biolin 100 ASK Chemicals Biolin 100 is a solvent-free copolymer resin based on renewable materials. Due to its high content of unsaturated double bonds and the hydrophobic polymer backbone Biolin 100 features a rapid air-drying with excellent final hardness. Biolin 100 contains n...展开 Biolin 100 is a solvent-free copolymer resin based on renewable materials. Due to its high content of unsaturated double bonds and the hydrophobic polymer backbone Biolin 100 features a rapid air-drying with excellent final hardness. Biolin 100 contains no siccative and therefore cobalt free or cobalt driers can be used. Biolin 100 can be used as 1K resin to formulate air-drying jointing compounds and sealants. Its distinct wetting behavior with various substrates like quartz sand and rubber granules is just one further advantage. 收起
Bleached Linseed Oil ADM Bleached Linseed Oil, in the form of amber clear liquid, is an all-purpose refined, free from mineral acids, grinding oil. It has many applications, such as varnishes, paints, alkyd resins, hardboard, inks, coatings, and more.
CALGAR® 0.35-0.7 Provencale S.A. CALGAR® 0.35-0.7, in the form of a white powder, is a calcium carbonate that can be used as a filler in paints and coatings. This product's mean particle size is 500 microns. Its pH in a water solution lies between 8.5 and 9.5, and its specific gravity ...展开 CALGAR® 0.35-0.7, in the form of a white powder, is a calcium carbonate that can be used as a filler in paints and coatings. This product's mean particle size is 500 microns. Its pH in a water solution lies between 8.5 and 9.5, and its specific gravity is 2.7. 收起
CALGAR® 0.5-1.5 Provencale S.A. CALGAR® 0.5-1.5, in the form of a white powder, is a calcium carbonate that can be used as a filler in paints and coatings. This product's untamped apparent density is 1.3. Its pH in a water solution lies between 8.5 and 9.5, and its specific gravity is...展开 CALGAR® 0.5-1.5, in the form of a white powder, is a calcium carbonate that can be used as a filler in paints and coatings. This product's untamped apparent density is 1.3. Its pH in a water solution lies between 8.5 and 9.5, and its specific gravity is 2.7. 收起
CALGAR® 1.5-3 Provencale S.A. CALGAR® 1.5-3, in the form of a white powder, is a calcium carbonate that can be used as a filler in paints and coatings. This product's untamped apparent density is 1.3. Its pH in a water solution lies between 8.5 and 9.5, and its specific gravity is 2...展开 CALGAR® 1.5-3, in the form of a white powder, is a calcium carbonate that can be used as a filler in paints and coatings. This product's untamped apparent density is 1.3. Its pH in a water solution lies between 8.5 and 9.5, and its specific gravity is 2.7. 收起
CALGAR® 130 Provencale S.A. CALGAR® 130, in the form of a white powder, is a calcium carbonate that can be used as a filler in paints and coatings. This product's mean particle size is 140 microns. Its pH in a water solution lies between 8.5 and 9.5, and its specific gravity is 2....展开 CALGAR® 130, in the form of a white powder, is a calcium carbonate that can be used as a filler in paints and coatings. This product's mean particle size is 140 microns. Its pH in a water solution lies between 8.5 and 9.5, and its specific gravity is 2.7. 收起
CALGAR® 40 Provencale S.A. CALGAR® 40, in the form of a white powder, is a calcium carbonate that can be used as a filler in paints and coatings. This product's mean particle size is 12 microns. Its pH in a water solution lies between 8.5 and 9.5, and its specific gravity is 2.7.
CALGAR® 80-800 Provencale S.A. CALGAR® 80-800, in the form of a white powder, is a calcium carbonate that can be used as a filler in paints and coatings. This product's untamped apparent density is 1.4. Its pH in a water solution lies between 8.5 and 9.5, and its specific gravity is ...展开 CALGAR® 80-800, in the form of a white powder, is a calcium carbonate that can be used as a filler in paints and coatings. This product's untamped apparent density is 1.4. Its pH in a water solution lies between 8.5 and 9.5, and its specific gravity is 2.7. 收起
CATALYST 704 ASK Chemicals Catalyst 704 is a relatively volatile tertiary amine and well suited to cure polyurethane formulations based on Askocoat technology. Dehydrated air as well as nitrogen are suitable carrier gases. The gas stream takes up the catalyst which is then applied ...展开 Catalyst 704 is a relatively volatile tertiary amine and well suited to cure polyurethane formulations based on Askocoat technology. Dehydrated air as well as nitrogen are suitable carrier gases. The gas stream takes up the catalyst which is then applied into the coating drum onto the uncured Askocoat-polyurethane layer of the fertilizer granules. Curing of the Askocoat-layer occurs within seconds. Surplus catalyst should be disposed of properly, e.g. by means of an amine scrubber. 收起
CATALYST 806 ASK Chemicals Catalyst 806 is a high reactive tertiary amine and well suited to cure polyurethane formulations based on Askocoat technology. Catalyst 806 has a high flash point, shows low volatility and therefore, ATEX-equipment can be avoided in most cases. Catalyst 8...展开 Catalyst 806 is a high reactive tertiary amine and well suited to cure polyurethane formulations based on Askocoat technology. Catalyst 806 has a high flash point, shows low volatility and therefore, ATEX-equipment can be avoided in most cases. Catalyst 806 is applied as fine spray into the coating drum onto the uncured Askocoat-polyurethane layer of the fertilizer granules. Curing of the Askocoat-layer occurs within seconds. Catalyst 806 has functional end-groups that irreversibly react into the polyurethane coating. 收起
Corindon Synthétique Provencale S.A. Corindon Synthétique, in the form of a grey powder, is an industrial raw material. This product is composed of about 99% aluminum oxide. It can be used in abrasion-resistant wood or decorative coatings. Its surface is often treated with silanes or sila...展开 Corindon Synthétique, in the form of a grey powder, is an industrial raw material. This product is composed of about 99% aluminum oxide. It can be used in abrasion-resistant wood or decorative coatings. Its surface is often treated with silanes or silane-based substances. 收起
Criscal 0.5-1 Provencale S.A. Criscal 0.5-1, in the form of a white powder, is a calcium carbonate that can be used as a filler in paints and coatings. Its untamped apparent density is 1.3. Its specific gravity is 2.7 and its refractive index is 1.59.
Criscal 1 Provencale S.A. Criscal 1, in the form of a white powder, is a calcium carbonate that can be used as a filler in paints and coatings. Its mean particle size is 1.6 microns. Its specific gravity is 2.7 and its refractive index is 1.59.
Criscal 1.5-2.5 Provencale S.A. Criscal 1.5-2.5, in the form of a white powder, is a calcium carbonate that can be used as a filler in paints and coatings. Its untamped apparent density is 1.3. Its specific gravity is 2.7 and its refractive index is 1.59.
Criscal 10 Provencale S.A. Criscal 10, in the form of a white powder, is a calcium carbonate that can be used as a filler in paints and coatings. Its mean particle size is 10 microns. Its specific gravity is 2.7 and its refractive index is 1.59.
Criscal 2 Provencale S.A. Criscal 2, in the form of a white powder, is a calcium carbonate that can be used as a filler in paints and coatings. Its mean particle size is 3 microns. Its specific gravity is 2.7 and its refractive index is 1.59.
Criscal 2-4 Provencale S.A. Criscal 2-4, in the form of a white powder, is a calcium carbonate that can be used as a filler in paints and coatings. Its untamped apparent density is 1.3. Its specific gravity is 2.7 and its refractive index is 1.59.
Criscal 5 Provencale S.A. Criscal 5, in the form of a white powder, is a calcium carbonate that can be used as a filler in paints and coatings. Its mean particle size is 5 microns. Its specific gravity is 2.7 and its refractive index is 1.59.
Criscal 80-800 Provencale S.A. Criscal 80-800, in the form of a white powder, is a calcium carbonate that can be used as a filler in paints and coatings. Its untamped apparent density is 1.3. Its specific gravity is 2.7 and its refractive index is 1.59.
EMULGATOR 5420 ASK Chemicals EMULGATOR 5420 is a white-yellow paste with a stock point of approx. 40 °C. It is a non-ionic emulsifier system especially designed to emulsify long oil alkyds like NECOWEL FLE in water. It is formulated to meet a HLB value (hydrophibic lipophilic balance...展开 EMULGATOR 5420 is a white-yellow paste with a stock point of approx. 40 °C. It is a non-ionic emulsifier system especially designed to emulsify long oil alkyds like NECOWEL FLE in water. It is formulated to meet a HLB value (hydrophibic lipophilic balance) of 11. 收起
ExBar™ 200 Excalibar Minerals LLC ExBar™ 200 is a raw mineral material that is manufactured from natural barium sulfate ore. This product is used in many different applications such as paints, adhesives and sealants. It has a median particle size of 15.0u and an oil absorption of 9.
ExBar™ 325 Excalibar Minerals LLC ExBar™ 325 is a raw mineral material that is manufactured from natural barium sulfate ore. This product is used in many different applications such as paints, adhesives and sealants. It has a median particle size of 10.0u and an oil absorption of 10.
ExBar™ 400 Excalibar Minerals LLC ExBar™ 400 is a raw mineral material that is manufactured from natural barium sulfate ore. This product is used in many different applications such as paints, adhesives and sealants. It has a median particle size of 8.0u and an oil absorption of 12.
ExBar™ W 1 Excalibar Minerals LLC ExBar™ W 1 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 1 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 1u and an oil absorption of 15. 收起
ExBar™ W 2 Excalibar Minerals LLC ExBar™ W 2 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 2 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 2u and an oil absorption of 13. 收起
ExBar™ W 3 Excalibar Minerals LLC ExBar™ W 3 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 3 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 3u and an oil absorption of 13. 收起
ExBar™ W 325 Excalibar Minerals LLC ExBar™ W 325 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are pr...展开 ExBar™ W 325 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. 收起
ExBar™ W 4 Excalibar Minerals LLC ExBar™ W 4 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 4 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 4u and an oil absorption of 12. 收起
ExBar™ W 400 Excalibar Minerals LLC ExBar™ W 400 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are pr...展开 ExBar™ W 400 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 8u and an oil absorption of 10. 收起
ExCal® 100 Excalibar Minerals LLC ExCal® 100 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications.
ExCal® 200 Excalibar Minerals LLC ExCal® 200 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications.
ExCal® 325 Excalibar Minerals LLC ExCal® 325 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications.
ExCal® 400 Excalibar Minerals LLC ExCal® 400 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications.
ExCal® CW 100 Excalibar Minerals LLC ExCal® CW 100 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand ar...展开 ExCal® CW 100 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand are a standard. 收起
ExCal® CW 200 Excalibar Minerals LLC ExCal® CW 200 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand ar...展开 ExCal® CW 200 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand are a standard. 收起
ExCal® CW 325 Excalibar Minerals LLC ExCal® CW 325 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand ar...展开 ExCal® CW 325 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand are a standard. 收起
Feldspar Provencale S.A. Feldspar, in the form of a crystalline solid, is a chemically resistant silicate with a thick-slated grain morphology. This product can be used in clear lacquer systems, UV-hardening lacquers, dispersion paints, silicate paints and plasters, and in plast...展开 Feldspar, in the form of a crystalline solid, is a chemically resistant silicate with a thick-slated grain morphology. This product can be used in clear lacquer systems, UV-hardening lacquers, dispersion paints, silicate paints and plasters, and in plastic films. It is mostly a potash feldspar that has been processed and separated by a screening technique that includes classification and micro-grinding. 收起
GP PHENOLIC RESIN 8900 ASK Chemicals GP PHENOLIC RESIN 8900 is a pure self-reactive phenolic resin solution in ethanol (resol-type) with medium reactivity. The cured resin provides excellent chemical and heat resistance and especially good flame resistance combined with low smoke density.
GP PHENOLIC RESIN BKR 2620 ASK Chemicals GP PHENOLIC RESIN BKR 2620 is a solid thermosetting alkylated phenolic resin. BKR 2620 offers good chemical resistance except against strong alkaline media. The resin is used as modifier for epoxy, vinyl and acrylic polymers to improve performance without...展开 GP PHENOLIC RESIN BKR 2620 is a solid thermosetting alkylated phenolic resin. BKR 2620 offers good chemical resistance except against strong alkaline media. The resin is used as modifier for epoxy, vinyl and acrylic polymers to improve performance without sacrificing flexibility. The flexibility is nearly not influenced by the addition of the resin. BKR 2620 is especially useful in providing excellent substrate wetting characteristics and intercoat adhesion to vinyl organosols. 收起
GP PHENOLIC RESIN BKS 2600 ASK Chemicals GP PHENOLIC RESIN BKS 2600 is a pure heat-reactive phenolic resin. It provide the highest level of chemical resistance except against strong alkaline media and can be used as sole binder for interior protective coatings for drums. Baking times are relativ...展开 GP PHENOLIC RESIN BKS 2600 is a pure heat-reactive phenolic resin. It provide the highest level of chemical resistance except against strong alkaline media and can be used as sole binder for interior protective coatings for drums. Baking times are relatively short, optimal baking conditions are in the range of 15 min. at 210 °C. Baking coatings based on GP PHENOLIC RESIN BKS 2600 provide very good adhesion on rigid metallic substrates. Coatings can be modified with e.g. polyvinyl butyral to enable them to withstand shocks or rough handling and yet maintain their chemical resistance. 收起
GP PHENOLIC RESIN BKS 2610 ASK Chemicals GP PHENOLIC RESIN BKS 2610 is a pure heat-reactive phenolic resin. BKS 2610 provides the highest level of chemical resistance except against strong alkaline media and can be used as sole binder for interior protective coatings for drums. Baking times are ...展开 GP PHENOLIC RESIN BKS 2610 is a pure heat-reactive phenolic resin. BKS 2610 provides the highest level of chemical resistance except against strong alkaline media and can be used as sole binder for interior protective coatings for drums. Baking times are relatively short, optimal baking conditions are in the range of 15 min. at 210 °C. 收起
GP PHENOLIC RESIN CK 2400 ASK Chemicals GP PHENOLIC RESIN CK 2400 is a solid thermoplastic phenolic resin. Durable finishes can be prepared by cold blending. The addition of 5 to 25 % of CK 2400 to oils or alkyd resins improves chemicals resistance, leveling, hardness, wetting as well as interc...展开 GP PHENOLIC RESIN CK 2400 is a solid thermoplastic phenolic resin. Durable finishes can be prepared by cold blending. The addition of 5 to 25 % of CK 2400 to oils or alkyd resins improves chemicals resistance, leveling, hardness, wetting as well as intercoat adhesion. CK 2400 features excellent drying speed. 收起
GP PHENOLIC RESIN GPRI 4003 ASK Chemicals GP PHENOLIC RESIN GPRI 4003 is an aqueous dispersion of a thermosetting phenol resol. It is designed as a crosslinker for latex and phenoxy resins to improve chemical resistance and adhesion for coatings on rigid substrates. The white, opaque dispersion c...展开 GP PHENOLIC RESIN GPRI 4003 is an aqueous dispersion of a thermosetting phenol resol. It is designed as a crosslinker for latex and phenoxy resins to improve chemical resistance and adhesion for coatings on rigid substrates. The white, opaque dispersion can be used for environmentally friendly coatings to meet very low VOC requirements. 收起
KLX 7997 Nokxeller Quimica Ltda KLX 7997 is a versatile polyether based aromatic isocyanate anionic dispersion for high tack formulations. It has a very soft and flexible film that can be used as a high initial and final bond strength and heat resistance. Typical applications are for mo...展开 KLX 7997 is a versatile polyether based aromatic isocyanate anionic dispersion for high tack formulations. It has a very soft and flexible film that can be used as a high initial and final bond strength and heat resistance. Typical applications are for modifying pressure sensitive textile & construction adhesives, neoprene, EVA and other plastic & leather primer applications. Once crosslinked shows outstanding water resistance. 收起
Kaolin Provencale S.A. Kaolin, in the form of a hexagonal, flexible, thin lamina, is a naturally occurring raw material that can be used in dispersion paints or dispersion adhesives. Its density is 2.6 g/cm3 and it has a high aspect ratio of 1:40.
ML 189 Linseed Oil ADM Pale Grinders, in the form of amber clear liquid, is linseed oil with linseed fatty acids, high acidity, good wetting properties, and light in color. It has many applications, such as varnishes, paints, alkyd resins, hardboard, inks, coatings, and more.
ML 189-70 Linseed Oil ADM ML 189-70 Linseed Oil is dicyclopentadiene copolymer that is 70% ± solids, fast drying, good alkali resistance, and can be made with lighter base for lighter color. It has recommended applications in enamels, varnishes, reinforced oils, and aluminum paint...展开 ML 189-70 Linseed Oil is dicyclopentadiene copolymer that is 70% ± solids, fast drying, good alkali resistance, and can be made with lighter base for lighter color. It has recommended applications in enamels, varnishes, reinforced oils, and aluminum paints. 收起
Mikhart® 0.35-0.7 Provencale S.A. Mikhart® 0.35-0.7, in the form of a white powder, is a calcium carbonate that can be used as a filler in paints and coatings. This product's particle size range is between .25 and .9 mm. Its specific gravity is 2.7 and its refractive index is 1.59.
Mikhart® 0.5-1 Provencale S.A. Mikhart® 0.5-1, in the form of a white powder, is a calcium carbonate that can be used as a filler in paints and coatings. This product's particle size range is between 0.7-1.2 mm. Its specific gravity is 2.7 and its refractive index is 1.59.
Mikhart® 0.5-1.5 Provencale S.A. Mikhart® 0.5-1.5, in the form of a white powder, is a calcium carbonate that can be used as a filler in paints and coatings. This product's particle size range is between 0.63-1.8 mm. Its specific gravity is 2.7 and its refractive index is 1.59.
Mikhart® 1 Provencale S.A. Mikhart® 1, in the form of a white powder, is a calcium carbonate that can be used as a filler in paints and coatings. This product's mean particle size is 1.7 microns. Its specific gravity is 2.7 and its refractive index is 1.59.
Mikhart® 1-2 Provencale S.A. Mikhart® 1-2, in the form of a white powder, is a calcium carbonate that can be used as a filler in paints and coatings. This product's particle size range is between 1.4-2.5 mm. Its specific gravity is 2.7 and its refractive index is 1.59.
Mikhart® 10 Provencale S.A. Mikhart® 10, in the form of a white powder, is a calcium carbonate that can be used as a filler in paints and coatings. This product's mean particle size is 10 microns. Its specific gravity is 2.7 and its refractive index is 1.59.
Mikhart® 110 Provencale S.A. Mikhart® 110, in the form of a white powder, is a calcium carbonate that can be used as a filler in paints and coatings. This product's particle size range is between 0-1 mm. Its specific gravity is 2.7 and its refractive index is 1.59.
Mikhart® 130 Provencale S.A. Mikhart® 130, in the form of a white powder, is a calcium carbonate that can be used as a filler in paints and coatings. This product's mean particle size is 140 microns. Its specific gravity is 2.7 and its refractive index is 1.59.
Mikhart® 15 Provencale S.A. Mikhart® 15, in the form of a white powder, is a calcium carbonate that can be used as a filler in paints and coatings. This product's mean particle size is 17 microns. Its specific gravity is 2.7 and its refractive index is 1.59.
Mikhart® 2 Provencale S.A. Mikhart® 2, in the form of a white powder, is a calcium carbonate that can be used as a filler in paints and coatings. This product's mean particle size is 3 microns. Its specific gravity is 2.7 and its refractive index is 1.59.
Mikhart® 40 Provencale S.A. Mikhart® 40, in the form of a white powder, is a calcium carbonate that can be used as a filler in paints and coatings. This product's mean particle size is 30 microns. Its specific gravity is 2.7 and its refractive index is 1.59.
Mikhart® 5 Provencale S.A. Mikhart® 5, in the form of a white powder, is a calcium carbonate that can be used as a filler in paints and coatings. This product's mean particle size is 5 microns. Its specific gravity is 2.7 and its refractive index is 1.59.
Mikhart® 65 Provencale S.A. Mikhart® 65, in the form of a white powder, is a calcium carbonate that can be used as a filler in paints and coatings. This product's mean particle size is 60 microns. Its specific gravity is 2.7 and its refractive index is 1.59.
Mikhart® M Provencale S.A. Mikhart® M, in the form of a white powder, is a calcium carbonate that can be used as a filler in paints and coatings. This product's mean particle size is 3.5 microns. Its specific gravity is 2.7 and its refractive index is 1.59.