| Aliphatic C5 Hydrocarbon Resin E1102 | Aquent Impex | Aliphatic C5 Hydrocarbon Resin E1102 is an amorphous, glassy, low-molecular-weight hydrocarbon polymer that promotes adhesion and tack in hot-melt and pressure-sensitive adhesives. Aliphatic C5 Hydrocarbon Resin E1102 has an initial colour (YI) value of 2...展开 Aliphatic C5 Hydrocarbon Resin E1102 is an amorphous, glassy, low-molecular-weight hydrocarbon polymer that promotes adhesion and tack in hot-melt and pressure-sensitive adhesives. Aliphatic C5 Hydrocarbon Resin E1102 has an initial colour (YI) value of 28. It can also be used as a modifier in polymer & rubber compounding and film applications. 收起 | |
| Aliphatic C5 Hydrocarbon Resin E1202 | Aquent Impex | Aliphatic C5 Hydrocarbon Resin E1202 is a amorphous, glassy, low-molecular-weight hydrocarbon polymer that promotes adhesion and tack in hot-melt and pressure-sensitive adhesives. Aliphatic C5 Hydrocarbon Resin E1202 has an initial colour (YI) value of 23...展开 Aliphatic C5 Hydrocarbon Resin E1202 is a amorphous, glassy, low-molecular-weight hydrocarbon polymer that promotes adhesion and tack in hot-melt and pressure-sensitive adhesives. Aliphatic C5 Hydrocarbon Resin E1202 has an initial colour (YI) value of 23. It can also be used as a modifier in polymer & rubber compounding and film applications. 收起 | |
| Aliphatic C5 Hydrocarbon Resin E1204 LS | Aquent Impex | Aliphatic C5 Hydrocarbon Resin E1204 LS is a amorphous, glassy, low-molecular-weight hydrocarbon polymer that promotes adhesion and tack in hot-melt and pressure-sensitive adhesives. Aliphatic C5 Hydrocarbon Resin E1204 LS has an initial colour (YI) value...展开 Aliphatic C5 Hydrocarbon Resin E1204 LS is a amorphous, glassy, low-molecular-weight hydrocarbon polymer that promotes adhesion and tack in hot-melt and pressure-sensitive adhesives. Aliphatic C5 Hydrocarbon Resin E1204 LS has an initial colour (YI) value of 31. It can also be used as a modifier in polymer & rubber compounding and film applications. 收起 | |
| Aliphatic C5 Hydrocarbon Resin E1304 | Aquent Impex | Aliphatic C5 Hydrocarbon Resin E1304 is a amorphous, glassy, low-molecular-weight hydrocarbon polymer that promotes adhesion and tack in hot-melt and pressure-sensitive adhesives. Aliphatic C5 Hydrocarbon Resin E1304 has an initial colour (YI) value of 29...展开 Aliphatic C5 Hydrocarbon Resin E1304 is a amorphous, glassy, low-molecular-weight hydrocarbon polymer that promotes adhesion and tack in hot-melt and pressure-sensitive adhesives. Aliphatic C5 Hydrocarbon Resin E1304 has an initial colour (YI) value of 29. It can also be used as a modifier in polymer & rubber compounding and film applications. 收起 | |
| Aliphatic C5 Hydrocarbon Resin E1310 | Aquent Impex | Aliphatic C5 Hydrocarbon Resin E1310 is a amorphous, glassy, low-molecular-weight hydrocarbon polymer that promotes adhesion and tack in hot-melt and pressure-sensitive adhesives. Aliphatic C5 Hydrocarbon Resin E1310 has an initial colour (YI) value of 25...展开 Aliphatic C5 Hydrocarbon Resin E1310 is a amorphous, glassy, low-molecular-weight hydrocarbon polymer that promotes adhesion and tack in hot-melt and pressure-sensitive adhesives. Aliphatic C5 Hydrocarbon Resin E1310 has an initial colour (YI) value of 25. It can also be used as a modifier in polymer & rubber compounding and film applications. 收起 | |
| Aliphatic C5 Hydrocarbon Resin E1401 | Aquent Impex | Aliphatic C5 Hydrocarbon Resin E1401 is a amorphous, glassy, low-molecular-weight hydrocarbon polymer that promotes adhesion and tack in hot-melt and pressure-sensitive adhesives. Aliphatic C5 Hydrocarbon Resin E1401 has an initial colour (YI) value of 31...展开 Aliphatic C5 Hydrocarbon Resin E1401 is a amorphous, glassy, low-molecular-weight hydrocarbon polymer that promotes adhesion and tack in hot-melt and pressure-sensitive adhesives. Aliphatic C5 Hydrocarbon Resin E1401 has an initial colour (YI) value of 31. It can also be used as a modifier in polymer & rubber compounding and film applications. 收起 | |
| Aliphatic C5 Hydrocarbon Resin E2203 LC | Aquent Impex | Aliphatic C5 Hydrocarbon Resin E2203 LC is a tackifier resin which provides tack and adherence to varied surfaces and also influence through low color, odorless, and stable product. As a tackifier, it offers high thermal stability, light color, polymer co...展开 Aliphatic C5 Hydrocarbon Resin E2203 LC is a tackifier resin which provides tack and adherence to varied surfaces and also influence through low color, odorless, and stable product. As a tackifier, it offers high thermal stability, light color, polymer compatibility, and low odor. Aliphatic C5 Hydrocarbon Resin E2203 LC has an initial colour (YI) value of 23. 收起 | |
| Aliphatic C5 Hydrocarbon Resin ECR 213 | Aquent Impex | Aliphatic C5 Hydrocarbon Resin ECR 213 is a tackifier resin which provides tack and adherence to varied surfaces and also influence through low color, odorless, and stable product. As a tackifier, it offers high thermal stability, light color, polymer com...展开 Aliphatic C5 Hydrocarbon Resin ECR 213 is a tackifier resin which provides tack and adherence to varied surfaces and also influence through low color, odorless, and stable product. As a tackifier, it offers high thermal stability, light color, polymer compatibility, and low odor. Aliphatic C5 Hydrocarbon Resin ECR 213 has an initial colour (YI) value of 87. 收起 | |
| Aliphatic C5 Hydrocarbon Resin ECR 288S | Aquent Impex | Aliphatic C5 Hydrocarbon Resin ECR 288S is a amorphous, glassy, low-molecular-weight hydrocarbon polymer that promotes adhesion and tack in hot-melt and pressure-sensitive adhesives. Aliphatic C5 Hydrocarbon Resin ECR 288S has an initial colour (YI) value...展开 Aliphatic C5 Hydrocarbon Resin ECR 288S is a amorphous, glassy, low-molecular-weight hydrocarbon polymer that promotes adhesion and tack in hot-melt and pressure-sensitive adhesives. Aliphatic C5 Hydrocarbon Resin ECR 288S has an initial colour (YI) value of 31. It can also be used as a modifier in polymer & rubber compounding and film applications. 收起 | |
| Aliphatic C5 Hydrocarbon Resin ECR 807 | Aquent Impex | Aliphatic C5 Hydrocarbon Resin ECR 807 is a tackifier resin which provides tack and adherence to varied surfaces and also influence through low color, odorless, and stable product. As a tackifier, it offers high thermal stability, light color, polymer com...展开 Aliphatic C5 Hydrocarbon Resin ECR 807 is a tackifier resin which provides tack and adherence to varied surfaces and also influence through low color, odorless, and stable product. As a tackifier, it offers high thermal stability, light color, polymer compatibility, and low odor. Aliphatic C5 Hydrocarbon Resin ECR 807 has an initial colour (YI) value of 32. 收起 | |
| Aqualac AYD-127 | Aquent Impex | Aqualac AYD-127 is a high quality, high performance, easy to use basic epoxy resin. It is colorless or yellow viscous liquid with low toxicity. Applications include use in coatings, adhesives, anticorrosion, electric insulation, laminated plates and potti...展开 Aqualac AYD-127 is a high quality, high performance, easy to use basic epoxy resin. It is colorless or yellow viscous liquid with low toxicity. Applications include use in coatings, adhesives, anticorrosion, electric insulation, laminated plates and potting fields or used as the raw material for high –grade epoxy resin processing. It has an epoxy equivalences of 180-190 (g/eq). 收起 | |
| Aqualac AYD-128 | Aquent Impex | Aqualac AYD-128 is a high quality, high performance, easy to use basic epoxy resin. It is colorless or yellow viscous liquid with low toxicity. Applications include use in coatings, adhesives, anticorrosion, electric insulation, laminated plates and potti...展开 Aqualac AYD-128 is a high quality, high performance, easy to use basic epoxy resin. It is colorless or yellow viscous liquid with low toxicity. Applications include use in coatings, adhesives, anticorrosion, electric insulation, laminated plates and potting fields or used as the raw material for high –grade epoxy resin processing. It has an epoxy equivalences of 184-194 (g/eq). 收起 | |
| Aqualac AYDPG- 660 | Aquent Impex | Aqualac AYDPG- 660 is a nonpoisonous, non-harmful epoxy resin. It is suitable for adhesives, casting, coatings, and non-solvent paints. It has an epoxy equivalent of 140-200 (g/eq). | |
| Aqualac AYDPG- 669 | Aquent Impex | Aqualac AYDPG- 669 is a nonpoisonous, non-harmful epoxy resin. It is suitable for adhesives, casting, coatings, and non-solvent paints. It has an epoxy equivalent of 125-143 (g/eq). | |
| Aqualac AYDPG-300 | Aquent Impex | Aqualac AYDPG-300 is a nonpoisonous, non-harmful epoxy resin. It is suitable for adhesives, casting, coatings, and non-solvent paints. It has an epoxy equivalent of 285-310 (g/eq). | |
| Aqualac AYDW-112W50 | Aquent Impex | Aqualac AYDW-112W50 is a waterborne Epoxy resin that has wonderful prospect of application due to its properties. Especially in terms of the application of this epoxy resin in combination with cement mortar, the introduction of hydrophilic groups into epo...展开 Aqualac AYDW-112W50 is a waterborne Epoxy resin that has wonderful prospect of application due to its properties. Especially in terms of the application of this epoxy resin in combination with cement mortar, the introduction of hydrophilic groups into epoxy makes this high performance organic & inorganic compound available with the high performance epoxy resin as a precondition. The outstanding advantage of waterborne epoxy resin lies on that this compound can be cured at atmospheric temperature & humidity with reasonable curing time. It can be mixed with such common cement-based material as cement mortar & concrete to enhance the early strength, tenacity, impact resistance & waterproof ability of above materials with very high cross-linking density. Applications include environmentally friendly, paint, car coatings, and cement floors. 收起 | |
| Aqualac AYDW-113W50 | Aquent Impex | Aqualac AYDW-112W50 is a waterborne Epoxy resin that has wonderful prospect of application due to its properties. Especially in terms of the application of this epoxy resin in combination with cement mortar, the introduction of hydrophilic groups into epo...展开 Aqualac AYDW-112W50 is a waterborne Epoxy resin that has wonderful prospect of application due to its properties. Especially in terms of the application of this epoxy resin in combination with cement mortar, the introduction of hydrophilic groups into epoxy makes this high performance organic & inorganic compound available with the high performance epoxy resin as a precondition. The outstanding advantage of waterborne epoxy resin lies on that this compound can be cured at atmospheric temperature & humidity with reasonable curing time. It can be mixed with such common cement-based material as cement mortar & concrete to enhance the early strength, tenacity, impact resistance & waterproof ability of above materials with very high cross-linking density. Applications include environmentally friendly, paint, car coatings, and cement floors. 收起 | |
| D.M.P. 30 | Synpol Products PVT. Ltd | D.M.P. 30 is a tertiary amine. This product has a viscosity of 2-5 cPs and a density of 0.9-1.0 g/cm3. D.M.P. 30 is most commonly used as a hardener in lamination and adhesive applications. | |
| Epoxy Phenol B.G.E. | Synpol Products PVT. Ltd | Epoxy Phenol B.G.E. is a reactive diluent. This product has a density of 0.92-0.94 g/cm3. Epoxy Phenol B.G.E. is most commonly used in casting, encapsulation, and bonding applications. | |
| Epoxy Phenol CNSL | Synpol Products PVT. Ltd | Epoxy Phenol CNSL is a reactive diluent. This product has a density of 0.96-0.97 g/cm3. Epoxy Phenol CNSL is most commonly used in casting, encapsulation, and bonding applications. | |
| Epoxy Phenol P.G.E. | Synpol Products PVT. Ltd | Epoxy Phenol P.G.E. is a reactive diluent. This product has a density of 1.11-1.22 g/cm3. Epoxy Phenol P.G.E. is most commonly used in casting, encapsulation, and bonding applications. | |
| Hardeners 111 | Synpol Products PVT. Ltd | Hardeners 111 is an aliphatic polyamine. This product has a viscosity of 15-25 cPs and a density of 0.98-0.99 g/cm3. Hardeners 111 is most commonly used in adhesive and coal tar modified surface coating applications. | |
| Hardeners 222 | Synpol Products PVT. Ltd | Hardeners 222 is an aliphatic polyamine. This product has a viscosity of 7-10 cPs and a density of 0.95-0.96 g/cm3. Hardeners 222 is most commonly used in adhesive and coal tar modified surface coating applications. | |
| Hardeners 260 | Synpol Products PVT. Ltd | Hardeners 260 is a modified aliphatic polyamine. This product has a viscosity of 75-80 cPs and a density of 1.0-1.1 g/cm3. Hardeners 260 is most commonly used in solvent-free epoxy coating and lamination applications. | |
| Hardeners 280 | Synpol Products PVT. Ltd | Hardeners 280 is a modified aliphatic polyamine. This product has a viscosity of 20-30 cPs and a density of 1.14-1.16 g/cm3. Hardeners 280 is most commonly used as a hardener in coating applications. | |
| Hardeners 340 | Synpol Products PVT. Ltd | Hardeners 340 is a modified aromatic polyamine. This product has a viscosity of 150-210 cPs and a density of 1.13-1.14 g/cm3. Hardeners 340 is most commonly used as a hardener in concrete and underwater coating applications. | |
| Hardeners 345 | Synpol Products PVT. Ltd | Hardeners 345 is a modified aliphatic polyamine. This product has a viscosity of 6-9 cPs and a density of 1.10-1.12 g/cm3. Hardeners 345 is most commonly used as a hardener in concrete and underwater coating applications. | |
| Hardeners 350 | Synpol Products PVT. Ltd | Hardeners 350 is a modified aliphatic polyamine. This product has a viscosity of 150-210 cPs and a density of 1.13-1.14 g/cm3. Hardeners 350 is most commonly used as a hardener in concrete and underwater coating applications. | |
| Hardeners 444 | Synpol Products PVT. Ltd | Hardeners 444 is an aliphatic amine epoxy adduct. This product has a viscosity of 2-4 cPs and a density of 0.95-0.96 g/cm3. Hardeners 444 is most commonly used in chemical and solvent-resistant coating applications. | |
| Hardeners 473 | Synpol Products PVT. Ltd | Hardeners 473 is a polyamine epoxy adduct. This product has a viscosity of 30-60 cPs and a density of 1.07-1.09 g/cm3. Hardeners 473 is most commonly used as a hardener in solvent-free epoxy coating applications. | |
| Hardeners 473 | Synpol Products PVT. Ltd | Hardeners 473 is an aliphatic amine adduct. This product has a viscosity of 100-140 cPs and a density of 1.10-1.12 g/cm3. Hardeners 473 is most commonly used in fast-setting adhesive applications. | |
| Hardeners 620 | Synpol Products PVT. Ltd | Hardeners 620 is a cycloaliphatic amine epoxy adduct. This product has a viscosity of 3-5 cPs and a density of 1.02-1.03 g/cm3. Hardeners 620 is most commonly used in flooring adhesive applications. | |
| Hardeners 640 | Synpol Products PVT. Ltd | Hardeners 640 is a phenyl alkamine. This product has a viscosity of 20-40 cPs and a density of 0.98-1.0 g/cm3. Hardeners 640 is most commonly used in solvent-free and high-solids epoxy coating applications. | |
| Synpol 1001 | Synpol Products PVT. Ltd | Synpol 1001 is a butylated UF amino resin. This product has a non-volatile compound content of 63-67% and a density at 25°C of 1.03-1.05 g/cm3. Synpol 1001 is most commonly used in general purpose baking enamel applications. | |
| Synpol 105X | Synpol Products PVT. Ltd | Synpol 105X is a reactive polyamide resin. This product has a density at 25°C of 0.96-0.98 g/cm3 and a non-volatile compound content of 58-62%. Synpol 105X is most commonly used as a hardener in solvent-based epoxy coating applications. | |
| Synpol 115 | Synpol Products PVT. Ltd | Synpol 115 is a reactive polyamide resin. This product has a density at 25°C of 0.97-0.98 g/cm3. Synpol 115 is most commonly used as a hardener in protective and decorative coating applications. | |
| Synpol 115 (70% in Xylene) | Synpol Products PVT. Ltd | Synpol 115 (70% in Xylene) is a reactive polyamide resin. This product has a density at 25°C of 0.94-0.95 g/cm3 and a non-volatile compound content of 68-72%. Synpol 115 (70% in Xylene) is most commonly used as a hardener in protective and decorative coa...展开 Synpol 115 (70% in Xylene) is a reactive polyamide resin. This product has a density at 25°C of 0.94-0.95 g/cm3 and a non-volatile compound content of 68-72%. Synpol 115 (70% in Xylene) is most commonly used as a hardener in protective and decorative coating applications. 收起 | |
| Synpol 130 | Synpol Products PVT. Ltd | Synpol 130 is a reactive polyamide resin. This product has a density at 25°C of 1.03-1.04 g/cm3 and a non-volatile compound content of 68-72%. Synpol 130 is most commonly used as a hardener in water-emulsifiable epoxy coating applications. | |
| Synpol 140 | Synpol Products PVT. Ltd | Synpol 140 is a reactive polyamide resin. This product has a density at 25°C of 0.96-0.98 g/cm3. Synpol 140 is most commonly used as a hardener in solvent-free coating, adhesive, and lamination applications. | |
| Synpol 150 | Synpol Products PVT. Ltd | Synpol 150 is a reactive polyamide resin. This product has a density at 25°C of 0.975-0.985 g/cm3. Synpol 150 is most commonly used as a hardener in solvent-free coating, adhesive, and lamination applications. | |
| Synpol 160 | Synpol Products PVT. Ltd | Synpol 160 is a reactive polyamide resin. This product has a density at 25°C of 0.94-0.96 g/cm3. Synpol 160 is most commonly used as a hardener in solvent-free coating, adhesive, and lamination applications. | |
| Synpol 160 LP | Synpol Products PVT. Ltd | Synpol 160 LP is a reactive polyamide resin. This product has a density at 25°C of 0.92-0.94 g/cm3. Synpol 160 LP is most commonly used as a hardener in solvent-free coating applications. | |
| Synpol 1800 | Synpol Products PVT. Ltd | Synpol 1800 is a bisphenol A-based, unmodified plasticizer. This product has a density of 1.17-1.19 g/cm3 and a melting point of 125-135ºC. Synpol 1800 is most commonly used in thermosetting bake finish and chemical-resistant container coating application...展开 Synpol 1800 is a bisphenol A-based, unmodified plasticizer. This product has a density of 1.17-1.19 g/cm3 and a melting point of 125-135ºC. Synpol 1800 is most commonly used in thermosetting bake finish and chemical-resistant container coating applications. 收起 | |
| Synpol 200 | Synpol Products PVT. Ltd | Synpol 200 is a bisphenol A-based, unmodified epoxy resin. This product has a viscosity at 25°C of 120-160 Poises. Synpol 200 is most commonly used in coating, lamination, and adhesive applications. | |
| Synpol 2080 | Synpol Products PVT. Ltd | Synpol 2080 is a coconut fatty acid-modified epoxy ester. This product has a density of 0.97-0.98 g/cm3. Synpol 2080 is most commonly used in clear and pigmented electronic and appliance finish applications. | |
| Synpol 210 | Synpol Products PVT. Ltd | Synpol 210 is a bisphenol A-based, unmodified reactive diluent. This product has a viscosity at 25°C of 180-210 Poises. Synpol 210 is most commonly used in coating, lamination, and adhesive applications. | |
| Synpol 220 | Synpol Products PVT. Ltd | Synpol 220 is a bisphenol A-based, unmodified reactive diluent. This product has a viscosity at 25°C of 180-200 Poises. Synpol 220 is most commonly used in coating, lamination, and adhesive applications. | |
| Synpol 230 | Synpol Products PVT. Ltd | Synpol 230 is a bisphenol A-based, unmodified plasticizer. This product has a viscosity at 25°C of 230-250 Poises. Synpol 230 is most commonly used in coating, lamination, and adhesive applications. | |
| Synpol 280 | Synpol Products PVT. Ltd | Synpol 280 is a bisphenol A-based, unmodified epoxy resin. This product has a density of 1.18-1.19 g/cm3. Synpol 280 is most commonly used in high-solids coating, adhesive, and lamination applications. | |
| Synpol 280 | Synpol Products PVT. Ltd | Synpol 280 is a bisphenol A-based, unmodified plasticizer. This product has a density of 1.22-1.24 g/cm3. Synpol 280 is most commonly used in heat-resistant laminate, electrical casting, adhesive, and coating applications. | |
| Synpol 4000 | Synpol Products PVT. Ltd | Synpol 4000 is a bisphenol A-based, unmodified plasticizer. This product has a density of 1.18-1.19 g/cm3 and a melting point of 145-155ºC. Synpol 4000 is most commonly used in thermosetting bake finish and chemical-resistant container coating application...展开 Synpol 4000 is a bisphenol A-based, unmodified plasticizer. This product has a density of 1.18-1.19 g/cm3 and a melting point of 145-155ºC. Synpol 4000 is most commonly used in thermosetting bake finish and chemical-resistant container coating applications where increased substrate adhesion is required. 收起 | |
| Synpol 450XX | Synpol Products PVT. Ltd | Synpol 450XX is a bisphenol A-based, unmodified epoxy resin. This product has a density of 1.07-1.09 g/cm3. Synpol 450XX is most commonly used in chemical-resistant, air-dry, and bake coating applications. | |
| Synpol 5545 | Synpol Products PVT. Ltd | Synpol 5545 is a linseed fatty acid-modified epoxy ester. This product has a density of 0.92-0.93 g/cm3. Synpol 5545 is most commonly used in air-drying maintenance finish applications. | |
| Synpol 6040 | Synpol Products PVT. Ltd | Synpol 6040 is a soya fatty acid-modified epoxy ester. This product has a density of 0.96-0.97 g/cm3. Synpol 6040 is most commonly used in clear and pigmented electronic and appliance finish applications. | |
| Synpol AT-67 | Synpol Products PVT. Ltd | Synpol AT-67 is an acrylic copolymer solution. This product has a density of 1.02-1.03 g/cm3 and a total non-volatile content of 56-60%. Synpol AT-67 is most commonly used in high-performance coating applications. | |
| Synpol AT-68 | Synpol Products PVT. Ltd | Synpol AT-68 is an acrylic copolymer solution. This product has a density of 1.01-1.03 g/cm3 and a total non-volatile content of 58-62%. Synpol AT-68 is most commonly used in flexible paint applications. | |
| Synpol B-10 | Synpol Products PVT. Ltd | Synpol B-10 is a thermoplastic homopolymer acrylic resin solution. This product has a density of 0.98-0.99 g/cm3 and a total non-volatile content of 38-42%. Synpol B-10 is most commonly used in screen printing, vinyl coating, plastic coating, gravure pr...展开 Synpol B-10 is a thermoplastic homopolymer acrylic resin solution. This product has a density of 0.98-0.99 g/cm3 and a total non-volatile content of 38-42%. Synpol B-10 is most commonly used in screen printing, vinyl coating, plastic coating, gravure printing ink, and PVC coating primer applications. 收起 | |
| Synpol B-30 | Synpol Products PVT. Ltd | Synpol B-30 is a polyvinyl butyral resin in a clear water white-colored, free flowing, granular form. This product has a density at 25°C of 1.05-1.15 g/cm3. Synpol B-30 is most commonly used in metal, textile, paper and foil coating, thermosetting and h...展开 Synpol B-30 is a polyvinyl butyral resin in a clear water white-colored, free flowing, granular form. This product has a density at 25°C of 1.05-1.15 g/cm3. Synpol B-30 is most commonly used in metal, textile, paper and foil coating, thermosetting and hot-melt adhesive, wood finish, and printing ink applications. 收起 | |
| Synpol B-60 | Synpol Products PVT. Ltd | Synpol B-60 is a polyvinyl butyral resin in a clear water white-colored, free flowing, granular form. This product has a density at 25°C of 1.05-1.15 g/cm3 and a softening point of 51-55°C. Synpol B-60 is most commonly used in metal, textile, paper and ...展开 Synpol B-60 is a polyvinyl butyral resin in a clear water white-colored, free flowing, granular form. This product has a density at 25°C of 1.05-1.15 g/cm3 and a softening point of 51-55°C. Synpol B-60 is most commonly used in metal, textile, paper and foil coating, thermosetting and hot-melt adhesive, wood finish, and printing ink applications. 收起 | |
| Synpol B-722 | Synpol Products PVT. Ltd | Synpol B-722 is a thermoplastic homopolymer acrylic resin solution. This product has a density of 0.99-1.00 g/cm3 and a total non-volatile content of 48-52%. Synpol B-722 is most commonly used in acrylic lacquer, wood lacquer, ink, and PVC coating appli...展开 Synpol B-722 is a thermoplastic homopolymer acrylic resin solution. This product has a density of 0.99-1.00 g/cm3 and a total non-volatile content of 48-52%. Synpol B-722 is most commonly used in acrylic lacquer, wood lacquer, ink, and PVC coating applications. 收起 | |
| Synpol BG-40 | Synpol Products PVT. Ltd | Synpol BG-40 is a butylated UF amino resin. This product has a non-volatile compound content of 72-76% and a density at 25°C of 1.01-1.03 g/cm3. Synpol BG-40 is most commonly used in high-gloss stoving enamel applications. | |
| Synpol L-9 | Synpol Products PVT. Ltd | Synpol L-9 is a butylated phenolic formaledyde resin. This product has a density of 0.98-0.99 g/cm3 and a total non-volatile content of 58-62%. Synpol L-9 is most commonly used in etch primer, adhesive, insulating varnish, and wire enamel applications. | |
| Synpol L-97 | Synpol Products PVT. Ltd | Synpol L-97 is a butylated phenolic formaldehyde resin. This product has a density of 0.98-0.99 g/cm3 and a total non-volatile content of 58-62%. Synpol L-97 is most commonly used in etch primer, adhesive, insulating varnish, and wire enamel applications. | |
| Synpol M-70 | Synpol Products PVT. Ltd | Synpol M-70 is a butylated MF amino resin. This product has a non-volatile compound content of 68-72% and a density at 25°C of 1.01-1.03 g/cm3. Synpol M-70 is most commonly used in flexible lacquer applications. | |
| Synpol MF-268 | Synpol Products PVT. Ltd | Synpol MF-268 is a butylated MF amino resin. This product has a non-volatile compound content of 58-62% and a density at 25°C of 1.01-1.03 g/cm3. Synpol MF-268 is most commonly used in stoving enamel applications. | |
| Synpol MF-310 | Synpol Products PVT. Ltd | Synpol MF-310 is a butylated MF amino resin. This product has a non-volatile compound content of 58-62% and a density at 25°C of 1.01-1.03 g/cm3. Synpol MF-310 is most commonly used in high-gloss enamel applications. | |
| Synpol SK-10 | Synpol Products PVT. Ltd | Synpol SK-10 is a ketone formaldehyde resin. This product has a hydroxyl value of 250-320 mgKOH/g. Synpol SK-10 is most commonly used in NC lacquer, printing ink, and surface coating applications. | |
| White Hydrogenated Hydrocarbon Resin E5300 | Aquent Impex | White Hydrogenated Hydrocarbon Resin E5300 is a water-white cycloaliphatic hydrocarbon resin which is designed to tackify a variety of adhesive polymers, including EVA, styrenic block copolymers (SIS, SBS,SEBS), and APAO. White Hydrogenated Hydrocarbon Re...展开 White Hydrogenated Hydrocarbon Resin E5300 is a water-white cycloaliphatic hydrocarbon resin which is designed to tackify a variety of adhesive polymers, including EVA, styrenic block copolymers (SIS, SBS,SEBS), and APAO. White Hydrogenated Hydrocarbon Resin E5300 has an initial colour (YI) value of 1. It is especially suited for nonwovens & packaging applications. 收起 | |
| White Hydrogenated Hydrocarbon Resin E5320 | Aquent Impex | White Hydrogenated Hydrocarbon Resin E5320 is a water-white cycloaliphatic hydrocarbon resin which is designed to tackify a variety of adhesive polymers, including EVA, styrenic block copolymers (SIS, SBS,SEBS), and APAO. White Hydrogenated Hydrocarbon Re...展开 White Hydrogenated Hydrocarbon Resin E5320 is a water-white cycloaliphatic hydrocarbon resin which is designed to tackify a variety of adhesive polymers, including EVA, styrenic block copolymers (SIS, SBS,SEBS), and APAO. White Hydrogenated Hydrocarbon Resin E5320 has an initial colour (YI) value of 1. It is especially suited for nonwovens & packaging applications. 收起 | |
| White Hydrogenated Hydrocarbon Resin E5340 | Aquent Impex | White Hydrogenated Hydrocarbon Resin E5340 is a water-white cycloaliphatic hydrocarbon resin which is designed to tackify a variety of adhesive polymers, including EVA, styrenic block copolymers (SIS, SBS,SEBS), and APAO. White Hydrogenated Hydrocarbon Re...展开 White Hydrogenated Hydrocarbon Resin E5340 is a water-white cycloaliphatic hydrocarbon resin which is designed to tackify a variety of adhesive polymers, including EVA, styrenic block copolymers (SIS, SBS,SEBS), and APAO. White Hydrogenated Hydrocarbon Resin E5340 has an initial colour (YI) value of 2. It is especially suited for nonwovens & packaging applications. 收起 | |
| White Hydrogenated Hydrocarbon Resin E5380 | Aquent Impex | White Hydrogenated Hydrocarbon Resin E5380 is a water-white cycloaliphatic hydrocarbon resin which is designed to tackify a variety of adhesive polymers, including EVA, styrenic block copolymers (SIS, SBS,SEBS), and APAO. White Hydrogenated Hydrocarbon Re...展开 White Hydrogenated Hydrocarbon Resin E5380 is a water-white cycloaliphatic hydrocarbon resin which is designed to tackify a variety of adhesive polymers, including EVA, styrenic block copolymers (SIS, SBS,SEBS), and APAO. White Hydrogenated Hydrocarbon Resin E5380 has an initial colour (YI) value of 2. It is especially suited for nonwovens & packaging applications. 收起 | |
| White Hydrogenated Hydrocarbon Resin E5600 | Aquent Impex | White Hydrogenated Hydrocarbon Resin E5600 is a water-white cycloaliphatic hydrocarbon resin which is designed to tackify a variety of adhesive polymers, including EVA, styrenic block copolymers (SIS, SBS,SEBS), and APAO. White Hydrogenated Hydrocarbon Re...展开 White Hydrogenated Hydrocarbon Resin E5600 is a water-white cycloaliphatic hydrocarbon resin which is designed to tackify a variety of adhesive polymers, including EVA, styrenic block copolymers (SIS, SBS,SEBS), and APAO. White Hydrogenated Hydrocarbon Resin E5600 has an initial colour (YI) value of 2. It is especially suited for nonwovens & packaging applications. 收起 | |
| White Hydrogenated Hydrocarbon Resin E5615 | Aquent Impex | White Hydrogenated Hydrocarbon Resin E5615 is a water-white cycloaliphatic hydrocarbon resin which is designed to tackify a variety of adhesive polymers, including EVA, styrenic block copolymers (SIS, SBS,SEBS), and APAO. White Hydrogenated Hydrocarbon Re...展开 White Hydrogenated Hydrocarbon Resin E5615 is a water-white cycloaliphatic hydrocarbon resin which is designed to tackify a variety of adhesive polymers, including EVA, styrenic block copolymers (SIS, SBS,SEBS), and APAO. White Hydrogenated Hydrocarbon Resin E5615 has an initial colour (YI) value of 2. It is especially suited for nonwovens & packaging applications. 收起 |
