| D.M.P. 30 | Synpol Products PVT. Ltd | D.M.P. 30 is a tertiary amine. This product has a viscosity of 2-5 cPs and a density of 0.9-1.0 g/cm3. D.M.P. 30 is most commonly used as a hardener in lamination and adhesive applications. | |
| Epoxy Phenol B.G.E. | Synpol Products PVT. Ltd | Epoxy Phenol B.G.E. is a reactive diluent. This product has a density of 0.92-0.94 g/cm3. Epoxy Phenol B.G.E. is most commonly used in casting, encapsulation, and bonding applications. | |
| Epoxy Phenol CNSL | Synpol Products PVT. Ltd | Epoxy Phenol CNSL is a reactive diluent. This product has a density of 0.96-0.97 g/cm3. Epoxy Phenol CNSL is most commonly used in casting, encapsulation, and bonding applications. | |
| Epoxy Phenol P.G.E. | Synpol Products PVT. Ltd | Epoxy Phenol P.G.E. is a reactive diluent. This product has a density of 1.11-1.22 g/cm3. Epoxy Phenol P.G.E. is most commonly used in casting, encapsulation, and bonding applications. | |
| Fintac2331 Non-Crystallizing Rosin | Finjet Chemical Industries, Ltd. | Fintac2331 Non-Crystallizing Rosin, in the form of a solid or flake, is a modified rosin that offers good combination of crystallization resistance and oxidation. This product is applied as a tackifier for polymers, and has suggested applications in water...展开 Fintac2331 Non-Crystallizing Rosin, in the form of a solid or flake, is a modified rosin that offers good combination of crystallization resistance and oxidation. This product is applied as a tackifier for polymers, and has suggested applications in water-based adhesives, pressure sensitive sealants, and alcohol soluble printing inks and paints. 收起 | |
| Fintac2333 Modified Rosin Resin | Finjet Chemical Industries, Ltd. | Fintac2333 Modified Rosin Resin is a low odor, non-crystallization rosin resin that is used to formulate numerous kinds of water-based and hot melt adhesives, effectively improving their original low temperature property and adhesion. This product is also...展开 Fintac2333 Modified Rosin Resin is a low odor, non-crystallization rosin resin that is used to formulate numerous kinds of water-based and hot melt adhesives, effectively improving their original low temperature property and adhesion. This product is also applicable for alcohol soluble paints and inks. 收起 | |
| Fintac5336 Polymerized Rosin | Finjet Chemical Industries, Ltd. | Fintac5336 Polymerized Rosin is a selectively polymerized rosin that has a higher softening point, good oxidation resistance, and higher heat resistance to adhesives. This product is mainly applied in adhesives, inks, synthetic resins, varnishes, and pain...展开 Fintac5336 Polymerized Rosin is a selectively polymerized rosin that has a higher softening point, good oxidation resistance, and higher heat resistance to adhesives. This product is mainly applied in adhesives, inks, synthetic resins, varnishes, and paints. 收起 | |
| Hardeners 111 | Synpol Products PVT. Ltd | Hardeners 111 is an aliphatic polyamine. This product has a viscosity of 15-25 cPs and a density of 0.98-0.99 g/cm3. Hardeners 111 is most commonly used in adhesive and coal tar modified surface coating applications. | |
| Hardeners 222 | Synpol Products PVT. Ltd | Hardeners 222 is an aliphatic polyamine. This product has a viscosity of 7-10 cPs and a density of 0.95-0.96 g/cm3. Hardeners 222 is most commonly used in adhesive and coal tar modified surface coating applications. | |
| Hardeners 260 | Synpol Products PVT. Ltd | Hardeners 260 is a modified aliphatic polyamine. This product has a viscosity of 75-80 cPs and a density of 1.0-1.1 g/cm3. Hardeners 260 is most commonly used in solvent-free epoxy coating and lamination applications. | |
| Hardeners 280 | Synpol Products PVT. Ltd | Hardeners 280 is a modified aliphatic polyamine. This product has a viscosity of 20-30 cPs and a density of 1.14-1.16 g/cm3. Hardeners 280 is most commonly used as a hardener in coating applications. | |
| Hardeners 340 | Synpol Products PVT. Ltd | Hardeners 340 is a modified aromatic polyamine. This product has a viscosity of 150-210 cPs and a density of 1.13-1.14 g/cm3. Hardeners 340 is most commonly used as a hardener in concrete and underwater coating applications. | |
| Hardeners 345 | Synpol Products PVT. Ltd | Hardeners 345 is a modified aliphatic polyamine. This product has a viscosity of 6-9 cPs and a density of 1.10-1.12 g/cm3. Hardeners 345 is most commonly used as a hardener in concrete and underwater coating applications. | |
| Hardeners 350 | Synpol Products PVT. Ltd | Hardeners 350 is a modified aliphatic polyamine. This product has a viscosity of 150-210 cPs and a density of 1.13-1.14 g/cm3. Hardeners 350 is most commonly used as a hardener in concrete and underwater coating applications. | |
| Hardeners 444 | Synpol Products PVT. Ltd | Hardeners 444 is an aliphatic amine epoxy adduct. This product has a viscosity of 2-4 cPs and a density of 0.95-0.96 g/cm3. Hardeners 444 is most commonly used in chemical and solvent-resistant coating applications. | |
| Hardeners 473 | Synpol Products PVT. Ltd | Hardeners 473 is a polyamine epoxy adduct. This product has a viscosity of 30-60 cPs and a density of 1.07-1.09 g/cm3. Hardeners 473 is most commonly used as a hardener in solvent-free epoxy coating applications. | |
| Hardeners 473 | Synpol Products PVT. Ltd | Hardeners 473 is an aliphatic amine adduct. This product has a viscosity of 100-140 cPs and a density of 1.10-1.12 g/cm3. Hardeners 473 is most commonly used in fast-setting adhesive applications. | |
| Hardeners 620 | Synpol Products PVT. Ltd | Hardeners 620 is a cycloaliphatic amine epoxy adduct. This product has a viscosity of 3-5 cPs and a density of 1.02-1.03 g/cm3. Hardeners 620 is most commonly used in flooring adhesive applications. | |
| Hardeners 640 | Synpol Products PVT. Ltd | Hardeners 640 is a phenyl alkamine. This product has a viscosity of 20-40 cPs and a density of 0.98-1.0 g/cm3. Hardeners 640 is most commonly used in solvent-free and high-solids epoxy coating applications. | |
| Synpol 1001 | Synpol Products PVT. Ltd | Synpol 1001 is a butylated UF amino resin. This product has a non-volatile compound content of 63-67% and a density at 25°C of 1.03-1.05 g/cm3. Synpol 1001 is most commonly used in general purpose baking enamel applications. | |
| Synpol 105X | Synpol Products PVT. Ltd | Synpol 105X is a reactive polyamide resin. This product has a density at 25°C of 0.96-0.98 g/cm3 and a non-volatile compound content of 58-62%. Synpol 105X is most commonly used as a hardener in solvent-based epoxy coating applications. | |
| Synpol 115 | Synpol Products PVT. Ltd | Synpol 115 is a reactive polyamide resin. This product has a density at 25°C of 0.97-0.98 g/cm3. Synpol 115 is most commonly used as a hardener in protective and decorative coating applications. | |
| Synpol 115 (70% in Xylene) | Synpol Products PVT. Ltd | Synpol 115 (70% in Xylene) is a reactive polyamide resin. This product has a density at 25°C of 0.94-0.95 g/cm3 and a non-volatile compound content of 68-72%. Synpol 115 (70% in Xylene) is most commonly used as a hardener in protective and decorative coa...展开 Synpol 115 (70% in Xylene) is a reactive polyamide resin. This product has a density at 25°C of 0.94-0.95 g/cm3 and a non-volatile compound content of 68-72%. Synpol 115 (70% in Xylene) is most commonly used as a hardener in protective and decorative coating applications. 收起 | |
| Synpol 130 | Synpol Products PVT. Ltd | Synpol 130 is a reactive polyamide resin. This product has a density at 25°C of 1.03-1.04 g/cm3 and a non-volatile compound content of 68-72%. Synpol 130 is most commonly used as a hardener in water-emulsifiable epoxy coating applications. | |
| Synpol 140 | Synpol Products PVT. Ltd | Synpol 140 is a reactive polyamide resin. This product has a density at 25°C of 0.96-0.98 g/cm3. Synpol 140 is most commonly used as a hardener in solvent-free coating, adhesive, and lamination applications. | |
| Synpol 150 | Synpol Products PVT. Ltd | Synpol 150 is a reactive polyamide resin. This product has a density at 25°C of 0.975-0.985 g/cm3. Synpol 150 is most commonly used as a hardener in solvent-free coating, adhesive, and lamination applications. | |
| Synpol 160 | Synpol Products PVT. Ltd | Synpol 160 is a reactive polyamide resin. This product has a density at 25°C of 0.94-0.96 g/cm3. Synpol 160 is most commonly used as a hardener in solvent-free coating, adhesive, and lamination applications. | |
| Synpol 160 LP | Synpol Products PVT. Ltd | Synpol 160 LP is a reactive polyamide resin. This product has a density at 25°C of 0.92-0.94 g/cm3. Synpol 160 LP is most commonly used as a hardener in solvent-free coating applications. | |
| Synpol 1800 | Synpol Products PVT. Ltd | Synpol 1800 is a bisphenol A-based, unmodified plasticizer. This product has a density of 1.17-1.19 g/cm3 and a melting point of 125-135ºC. Synpol 1800 is most commonly used in thermosetting bake finish and chemical-resistant container coating application...展开 Synpol 1800 is a bisphenol A-based, unmodified plasticizer. This product has a density of 1.17-1.19 g/cm3 and a melting point of 125-135ºC. Synpol 1800 is most commonly used in thermosetting bake finish and chemical-resistant container coating applications. 收起 | |
| Synpol 200 | Synpol Products PVT. Ltd | Synpol 200 is a bisphenol A-based, unmodified epoxy resin. This product has a viscosity at 25°C of 120-160 Poises. Synpol 200 is most commonly used in coating, lamination, and adhesive applications. | |
| Synpol 2080 | Synpol Products PVT. Ltd | Synpol 2080 is a coconut fatty acid-modified epoxy ester. This product has a density of 0.97-0.98 g/cm3. Synpol 2080 is most commonly used in clear and pigmented electronic and appliance finish applications. | |
| Synpol 210 | Synpol Products PVT. Ltd | Synpol 210 is a bisphenol A-based, unmodified reactive diluent. This product has a viscosity at 25°C of 180-210 Poises. Synpol 210 is most commonly used in coating, lamination, and adhesive applications. | |
| Synpol 220 | Synpol Products PVT. Ltd | Synpol 220 is a bisphenol A-based, unmodified reactive diluent. This product has a viscosity at 25°C of 180-200 Poises. Synpol 220 is most commonly used in coating, lamination, and adhesive applications. | |
| Synpol 230 | Synpol Products PVT. Ltd | Synpol 230 is a bisphenol A-based, unmodified plasticizer. This product has a viscosity at 25°C of 230-250 Poises. Synpol 230 is most commonly used in coating, lamination, and adhesive applications. | |
| Synpol 280 | Synpol Products PVT. Ltd | Synpol 280 is a bisphenol A-based, unmodified epoxy resin. This product has a density of 1.18-1.19 g/cm3. Synpol 280 is most commonly used in high-solids coating, adhesive, and lamination applications. | |
| Synpol 280 | Synpol Products PVT. Ltd | Synpol 280 is a bisphenol A-based, unmodified plasticizer. This product has a density of 1.22-1.24 g/cm3. Synpol 280 is most commonly used in heat-resistant laminate, electrical casting, adhesive, and coating applications. | |
| Synpol 4000 | Synpol Products PVT. Ltd | Synpol 4000 is a bisphenol A-based, unmodified plasticizer. This product has a density of 1.18-1.19 g/cm3 and a melting point of 145-155ºC. Synpol 4000 is most commonly used in thermosetting bake finish and chemical-resistant container coating application...展开 Synpol 4000 is a bisphenol A-based, unmodified plasticizer. This product has a density of 1.18-1.19 g/cm3 and a melting point of 145-155ºC. Synpol 4000 is most commonly used in thermosetting bake finish and chemical-resistant container coating applications where increased substrate adhesion is required. 收起 | |
| Synpol 450XX | Synpol Products PVT. Ltd | Synpol 450XX is a bisphenol A-based, unmodified epoxy resin. This product has a density of 1.07-1.09 g/cm3. Synpol 450XX is most commonly used in chemical-resistant, air-dry, and bake coating applications. | |
| Synpol 5545 | Synpol Products PVT. Ltd | Synpol 5545 is a linseed fatty acid-modified epoxy ester. This product has a density of 0.92-0.93 g/cm3. Synpol 5545 is most commonly used in air-drying maintenance finish applications. | |
| Synpol 6040 | Synpol Products PVT. Ltd | Synpol 6040 is a soya fatty acid-modified epoxy ester. This product has a density of 0.96-0.97 g/cm3. Synpol 6040 is most commonly used in clear and pigmented electronic and appliance finish applications. | |
| Synpol AT-67 | Synpol Products PVT. Ltd | Synpol AT-67 is an acrylic copolymer solution. This product has a density of 1.02-1.03 g/cm3 and a total non-volatile content of 56-60%. Synpol AT-67 is most commonly used in high-performance coating applications. | |
| Synpol AT-68 | Synpol Products PVT. Ltd | Synpol AT-68 is an acrylic copolymer solution. This product has a density of 1.01-1.03 g/cm3 and a total non-volatile content of 58-62%. Synpol AT-68 is most commonly used in flexible paint applications. | |
| Synpol B-10 | Synpol Products PVT. Ltd | Synpol B-10 is a thermoplastic homopolymer acrylic resin solution. This product has a density of 0.98-0.99 g/cm3 and a total non-volatile content of 38-42%. Synpol B-10 is most commonly used in screen printing, vinyl coating, plastic coating, gravure pr...展开 Synpol B-10 is a thermoplastic homopolymer acrylic resin solution. This product has a density of 0.98-0.99 g/cm3 and a total non-volatile content of 38-42%. Synpol B-10 is most commonly used in screen printing, vinyl coating, plastic coating, gravure printing ink, and PVC coating primer applications. 收起 | |
| Synpol B-30 | Synpol Products PVT. Ltd | Synpol B-30 is a polyvinyl butyral resin in a clear water white-colored, free flowing, granular form. This product has a density at 25°C of 1.05-1.15 g/cm3. Synpol B-30 is most commonly used in metal, textile, paper and foil coating, thermosetting and h...展开 Synpol B-30 is a polyvinyl butyral resin in a clear water white-colored, free flowing, granular form. This product has a density at 25°C of 1.05-1.15 g/cm3. Synpol B-30 is most commonly used in metal, textile, paper and foil coating, thermosetting and hot-melt adhesive, wood finish, and printing ink applications. 收起 | |
| Synpol B-60 | Synpol Products PVT. Ltd | Synpol B-60 is a polyvinyl butyral resin in a clear water white-colored, free flowing, granular form. This product has a density at 25°C of 1.05-1.15 g/cm3 and a softening point of 51-55°C. Synpol B-60 is most commonly used in metal, textile, paper and ...展开 Synpol B-60 is a polyvinyl butyral resin in a clear water white-colored, free flowing, granular form. This product has a density at 25°C of 1.05-1.15 g/cm3 and a softening point of 51-55°C. Synpol B-60 is most commonly used in metal, textile, paper and foil coating, thermosetting and hot-melt adhesive, wood finish, and printing ink applications. 收起 | |
| Synpol B-722 | Synpol Products PVT. Ltd | Synpol B-722 is a thermoplastic homopolymer acrylic resin solution. This product has a density of 0.99-1.00 g/cm3 and a total non-volatile content of 48-52%. Synpol B-722 is most commonly used in acrylic lacquer, wood lacquer, ink, and PVC coating appli...展开 Synpol B-722 is a thermoplastic homopolymer acrylic resin solution. This product has a density of 0.99-1.00 g/cm3 and a total non-volatile content of 48-52%. Synpol B-722 is most commonly used in acrylic lacquer, wood lacquer, ink, and PVC coating applications. 收起 | |
| Synpol BG-40 | Synpol Products PVT. Ltd | Synpol BG-40 is a butylated UF amino resin. This product has a non-volatile compound content of 72-76% and a density at 25°C of 1.01-1.03 g/cm3. Synpol BG-40 is most commonly used in high-gloss stoving enamel applications. | |
| Synpol L-9 | Synpol Products PVT. Ltd | Synpol L-9 is a butylated phenolic formaledyde resin. This product has a density of 0.98-0.99 g/cm3 and a total non-volatile content of 58-62%. Synpol L-9 is most commonly used in etch primer, adhesive, insulating varnish, and wire enamel applications. | |
| Synpol L-97 | Synpol Products PVT. Ltd | Synpol L-97 is a butylated phenolic formaldehyde resin. This product has a density of 0.98-0.99 g/cm3 and a total non-volatile content of 58-62%. Synpol L-97 is most commonly used in etch primer, adhesive, insulating varnish, and wire enamel applications. | |
| Synpol M-70 | Synpol Products PVT. Ltd | Synpol M-70 is a butylated MF amino resin. This product has a non-volatile compound content of 68-72% and a density at 25°C of 1.01-1.03 g/cm3. Synpol M-70 is most commonly used in flexible lacquer applications. | |
| Synpol MF-268 | Synpol Products PVT. Ltd | Synpol MF-268 is a butylated MF amino resin. This product has a non-volatile compound content of 58-62% and a density at 25°C of 1.01-1.03 g/cm3. Synpol MF-268 is most commonly used in stoving enamel applications. | |
| Synpol MF-310 | Synpol Products PVT. Ltd | Synpol MF-310 is a butylated MF amino resin. This product has a non-volatile compound content of 58-62% and a density at 25°C of 1.01-1.03 g/cm3. Synpol MF-310 is most commonly used in high-gloss enamel applications. | |
| Synpol SK-10 | Synpol Products PVT. Ltd | Synpol SK-10 is a ketone formaldehyde resin. This product has a hydroxyl value of 250-320 mgKOH/g. Synpol SK-10 is most commonly used in NC lacquer, printing ink, and surface coating applications. | |
| Winlex4101 Pentaerythritol Rosin Ester | Finjet Chemical Industries, Ltd. | Winlex4101 Pentaerythritol Rosin Ester is a light-colored pentaerythritol rosin ester that has been stabilized to provide excellent heat and aging stability. This product is applied in hot melt adhesives, sealants, and coatings. | |
| Winlex4105 Glycerol Rosin Ester | Finjet Chemical Industries, Ltd. | Winlex4105 Glycerol Rosin Ester is a glycerol ester of partially dimerized rosin that has a high softening point and good adhesion. This product is applied in hot melt adhesives, water-based adhesives, and coating applications. | |
| Winlex4110 Rosin Ester | Finjet Chemical Industries, Ltd. | Winlex4110 Rosin Ester is a glycerol rosin ester that has good heat stability and excellent polymer compatibility. This product is applied in hot melt adhesives and solvent-borne acrylic adhesives. | |
| Winlex4125 Polymerized Rosin Ester | Finjet Chemical Industries, Ltd. | Winlex4105 Polymerized Rosin Ester is a pentaerythritol ester of partially dimerized rosin that has a high softening point and good adhesion. This product is often used as a tackifier in hot melt adhesives, and can also be applied in water-based adhesives...展开 Winlex4105 Polymerized Rosin Ester is a pentaerythritol ester of partially dimerized rosin that has a high softening point and good adhesion. This product is often used as a tackifier in hot melt adhesives, and can also be applied in water-based adhesives, and coating applications. 收起 | |
| Winlex4270 Liquid Rosin Ester | Finjet Chemical Industries, Ltd. | Winlex4270 Liquid Rosin Ester is a low odor, liquid rosin ester that is designed for applications requiring high tack and low odor. This product is applied in adhesives as a tackifier and in hot melt adhesives as a plasticizer. |
