| 1,10-Phenanthroline Anhydrous | Hainan Zhongxin Chemical Co., Ltd. | 1,10-Phenanthroline Anhydrous ,synonymous with O-Phenanthroline, is a white powder that is 99% pure. It is primarily used as an analysis reagent, it can be used as an additive in the field of electroplating. | |
| 1,2-Bis(Tetrabromophthalimido) Ethane | Hainan Zhongxin Chemical Co., Ltd. | 1,2-bis(Tetrabromophthalimido) Ethane, synonymous with BT-93W and ethylene bis-(tetrabromophthalimide), is a white powder of about 5µm max that is 66.5% pure. It is primarily used as a flame retardant in plastics and paints including: HIPS, ABS, ABS/PC a...展开 1,2-bis(Tetrabromophthalimido) Ethane, synonymous with BT-93W and ethylene bis-(tetrabromophthalimide), is a white powder of about 5µm max that is 66.5% pure. It is primarily used as a flame retardant in plastics and paints including: HIPS, ABS, ABS/PC alloy, PC, LDPE and PBT. 收起 | |
| 2-(4,6-Bis-(2,4-Dimethylphenyl)-1,3,5-Triazin-2-Yl)-5-(Octylox Y)-Phenyl (UV-0) | Hainan Zhongxin Chemical Co., Ltd. | 2-(4,6-Bis-(2,4-Dimethylphenyl)-1,3,5-Triazin-2-Yl)-5-(Octylox Y)-Phenyl (UV-0) is a yellow to white crystalline powder that is 99% pure. It is primarily used as a light stabilizer, this product is an efficient UV radiation absorbing agent. UV-O is recomm...展开 2-(4,6-Bis-(2,4-Dimethylphenyl)-1,3,5-Triazin-2-Yl)-5-(Octylox Y)-Phenyl (UV-0) is a yellow to white crystalline powder that is 99% pure. It is primarily used as a light stabilizer, this product is an efficient UV radiation absorbing agent. UV-O is recommended for use in polyolefine, poyvinyl chlornamee, polystyrene etc. 收起 | |
| 2–Hydroxy-4-n-octoxy-benzophenone (UV-531) | Hainan Zhongxin Chemical Co., Ltd. | 2–Hydroxy-4-n-octoxy-benzophenone (UV-531) is a light yellow needle like powder that is 99% pure. This product is a light stabilizer capable of absorbing the UV radiation of 240-340 nm wavelength. It is widely applied to PE,PVC,PP,PS,PC organic glass, pol...展开 2–Hydroxy-4-n-octoxy-benzophenone (UV-531) is a light yellow needle like powder that is 99% pure. This product is a light stabilizer capable of absorbing the UV radiation of 240-340 nm wavelength. It is widely applied to PE,PVC,PP,PS,PC organic glass, polypropylene fiber, ethylene-vinyl acetate etc. 收起 | |
| 2-Mercaptobenzothiazole | Hainan Zhongxin Chemical Co., Ltd. | 2-Mercaptobenzothiazole MBT(M) is a fast and nonpolluting accelerator suitable for rubbers and latex. It's available as either a light yellow powder or granule and can achieve good cold vulcanization when used together with a secondary accelerator such as...展开 2-Mercaptobenzothiazole MBT(M) is a fast and nonpolluting accelerator suitable for rubbers and latex. It's available as either a light yellow powder or granule and can achieve good cold vulcanization when used together with a secondary accelerator such as TMTD, TETD or DPG. It can impart anti-aging properties to vulcanized rubbers and is mainly used in the manufacturing of tires, adhesive tapes, rubber overshoes and other rubber products. 收起 | |
| 2-Mercaptobenzothiazole (Refined) | Hainan Zhongxin Chemical Co., Ltd. | 2-Mercaptobenzothiazole MBT(M) (Refined) is a fast and nonpolluting accelerator suitable for rubbers and latex. It's available as either as a light yellow powder or granule and can achieve good cold vulcanization when used together with secondary accelera...展开 2-Mercaptobenzothiazole MBT(M) (Refined) is a fast and nonpolluting accelerator suitable for rubbers and latex. It's available as either as a light yellow powder or granule and can achieve good cold vulcanization when used together with secondary accelerator such as TMTD, TETD or DPG. It can impart anti-aging properties to vulcanized rubbers and is mainly used in the manufacturing of tires, adhesive tapes, rubber overshoes and other rubber products. 2-Mercaptobenzothiazole is a refined version of 2-Mercaptobenzothiazole with a slightly higher initial M.P. count of 172.0 minimum oC. 收起 | |
| 2-(Morpholinothio)benzothiazole | Hainan Zhongxin Chemical Co., Ltd. | 2-(Morpholinothio)benzothiazole, synonymous with NOBS (MBS) is faint yellow or orange granules that are at least 95% pure. It is an after-effect quick accelerator which can increase scorching time and improve processing safety. It is primarily used as an ...展开 2-(Morpholinothio)benzothiazole, synonymous with NOBS (MBS) is faint yellow or orange granules that are at least 95% pure. It is an after-effect quick accelerator which can increase scorching time and improve processing safety. It is primarily used as an accelerator in the production rubbers and adhesives. 收起 | |
| 2,4-Bis(2,4-Dimethylphenyl)-6-(2-Hydroxy-4-Isooctyloxyphenyl )-1,3,5-Triazine (UV-9) | Hainan Zhongxin Chemical Co., Ltd. | 2,4-Bis(2,4-Dimethylphenyl)-6-(2-Hydroxy-4-Isooctyloxyphenyl )-1,3,5-Triazine (UV-9) is a light yellow crystalline powder that is 99% pure. This product is a high-efficienct UV radiation absorbing agent, capable of effectively absorbing UV radiation of 29...展开 2,4-Bis(2,4-Dimethylphenyl)-6-(2-Hydroxy-4-Isooctyloxyphenyl )-1,3,5-Triazine (UV-9) is a light yellow crystalline powder that is 99% pure. This product is a high-efficienct UV radiation absorbing agent, capable of effectively absorbing UV radiation of 290-400 nm wavelength. It is applicable to paint and various plastic products, particular effective to polyvinyl chloirde, polystyrene, polyurethane and acrylic resins. 收起 | |
| 4,4'-dithiodimorpholine | Hainan Zhongxin Chemical Co., Ltd. | 4,4'-dithiodimorpholine, synonymous with DTDM and Vulcanizing Agent DTDM, is a sulphur donor vulcanizing agent for efficient vulcanization and semi-efficient vulcanization cure systems. It is a white crystline powder or granule that is primarily used in t...展开 4,4'-dithiodimorpholine, synonymous with DTDM and Vulcanizing Agent DTDM, is a sulphur donor vulcanizing agent for efficient vulcanization and semi-efficient vulcanization cure systems. It is a white crystline powder or granule that is primarily used in the production of synthetic rubbers and adhesives. 收起 | |
| 9,10-Dihydro-9-oxa-10-phosphaphenanthrene-10-oxide | Hainan Zhongxin Chemical Co., Ltd. | 9,10-Dihydro-9-oxa-10-phosphaphenanthrene-10-oxide (DOPO) is a white granule powder that is 99% pure. It is primarily used as an antibacterial agent, antioxidant, discoloration preventive and fireproofing agent. DOPO can also be used as a reactant for syn...展开 9,10-Dihydro-9-oxa-10-phosphaphenanthrene-10-oxide (DOPO) is a white granule powder that is 99% pure. It is primarily used as an antibacterial agent, antioxidant, discoloration preventive and fireproofing agent. DOPO can also be used as a reactant for synthesis of monomer and water-thinned ink compositions. 收起 | |
| α-Pyrrolidone | Shanghai WellTone Material Technology Co., Ltd. | α-Pyrrolidone is a colorless high boiling point polar solvent and also an organic synthetic intermediate product. As to this kind of solvent, it can be used to produce synthetic resin, pesticide, polyvalent alcohol, printing inks and iodine. | |
| Alinco™ M-25 Linseed Oil | ADM | Alinco™ M-25 Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall finish...展开 Alinco™ M-25 Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall finishes, and more. 收起 | |
| Alinco™ Q Linseed Oil | ADM | Alinco™ Q Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall finishes,...展开 Alinco™ Q Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall finishes, and more. 收起 | |
| Alinco™ X Linseed Oil | ADM | Alinco™ X Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall finishes,...展开 Alinco™ X Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall finishes, and more. 收起 | |
| Alinco™ Y Linseed Oil | ADM | Alinco™ Y Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall finishes,...展开 Alinco™ Y Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall finishes, and more. 收起 | |
| Alinco™ Z Linseed Oil | ADM | Alinco™ Z Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall finishes,...展开 Alinco™ Z Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall finishes, and more. 收起 | |
| Alinco™ Z-1 Linseed Oil | ADM | Alinco™ Z-1 Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall finishe...展开 Alinco™ Z-1 Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall finishes, and more. 收起 | |
| Alinco™ Z-2 Linseed Oil | ADM | Alinco™ Z-2 Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall finishe...展开 Alinco™ Z-2 Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall finishes, and more. 收起 | |
| Alinco™ Z-3 Linseed Oil | ADM | Alinco™ Z-3 Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall finishe...展开 Alinco™ Z-3 Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall finishes, and more. 收起 | |
| Alinco™ Z-4 Linseed Oil | ADM | Alinco™ Z-4 Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall finishe...展开 Alinco™ Z-4 Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall finishes, and more. 收起 | |
| Alinco™ Z-5 Linseed Oil | ADM | Alinco™ Z-5 Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall finishe...展开 Alinco™ Z-5 Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall finishes, and more. 收起 | |
| Alinco™ Z-6 Linseed Oil | ADM | Alinco™ Z-6 Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall finishe...展开 Alinco™ Z-6 Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall finishes, and more. 收起 | |
| Alinco™ Z/2-Z/3 Linseed Oil | ADM | Alinco™ Z/2-Z/3 Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall fin...展开 Alinco™ Z/2-Z/3 Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall finishes, and more. 收起 | |
| Amino C Acid | Hainan Zhongxin Chemical Co., Ltd. | Amino C Acid is a grey powder with the molecular formula of C10H9NO6S2. It has an amino content of between 70 - 80 % minimum and an HPLC purity of 97%. Amino C Acid is primarily used as an intermediate in the production of reactive and direct dyes. | |
| Anti-Spalling Compound | ADM | Anti-Spalling Compound, in the form of a semi viscous to viscous liquid, is a blend of scientific boiled linseed oil and mineral spirits. It has many applications, such as varnishes, paints, alkyd resins, hardboard, inks, coatings, and more. | |
| Antimony Trioxide | Hainan Zhongxin Chemical Co., Ltd. | Antimony Trioxide is a fine white powder with a particle size of about 0.8 - 1.2um, and is 99.5% pure. It is primarily used as a flame retardant in plastics, rubber, paints, paper, textiles, and electronics. It can also be used as a catalyst, a clarifyin...展开 Antimony Trioxide is a fine white powder with a particle size of about 0.8 - 1.2um, and is 99.5% pure. It is primarily used as a flame retardant in plastics, rubber, paints, paper, textiles, and electronics. It can also be used as a catalyst, a clarifying agent for glass, an opacifier for porcelain and enamel, and a white pigment for paint. 收起 | |
| Benzoic acid | Hainan Zhongxin Chemical Co., Ltd. | Benzoic acid has many uses in the field of medicines, dye carriers, plasticizers, perfumes and food preservatives. It can also be used for improving the performance of alkyd resin coatings and in pharmaceutical and dye intermediates. | |
| Bleached Linseed Oil | ADM | Bleached Linseed Oil, in the form of amber clear liquid, is an all-purpose refined, free from mineral acids, grinding oil. It has many applications, such as varnishes, paints, alkyd resins, hardboard, inks, coatings, and more. | |
| Brominated Epoxy Oligomers | Hainan Zhongxin Chemical Co., Ltd. | Brominated Epoxy Oligomers (BEO) is a white to light yellow powder/granule which contains between 51-54% Bromine. It is primarily used as a flame retardant in PBT, PET, PTV, PC/ABS, ABS and HIPS high polymer alloys. It has a good melting rate with excelle...展开 Brominated Epoxy Oligomers (BEO) is a white to light yellow powder/granule which contains between 51-54% Bromine. It is primarily used as a flame retardant in PBT, PET, PTV, PC/ABS, ABS and HIPS high polymer alloys. It has a good melting rate with excellent thermal and light stability. 收起 | |
| Brominated Polystyrene | Hainan Zhongxin Chemical Co., Ltd. | Brominated Polystyrene (BPS) is a white granule powder with a bromine content of 68% or more. It is primarily used as a flame retardant in paints and plastics. Brominated Polystyrene is suitable for the production of polyester (PET, PBT, PCT) and daiamid(...展开 Brominated Polystyrene (BPS) is a white granule powder with a bromine content of 68% or more. It is primarily used as a flame retardant in paints and plastics. Brominated Polystyrene is suitable for the production of polyester (PET, PBT, PCT) and daiamid(nylon) ect. 收起 | |
| Chromic Anhydride | Hainan Zhongxin Chemical Co., Ltd. | Chromic Anhydride is a dark purplish-red flake that is insoluble in water and contains 0.15% sulphates. It is synonymous with chromium (vi) oxide and chromium trioxide and is primarily used in electroplating, wood preservation, chrome oxide green tinting,...展开 Chromic Anhydride is a dark purplish-red flake that is insoluble in water and contains 0.15% sulphates. It is synonymous with chromium (vi) oxide and chromium trioxide and is primarily used in electroplating, wood preservation, chrome oxide green tinting, catalyst and as an oxidant. 收起 | |
| Decabromodiphenyl Oxide | Hainan Zhongxin Chemical Co., Ltd. | Decabromodiphenyl Oxide (DBDPO) is a white powder with an average particle size of 3µm and contains between 82-83% Br. It is primarily used as a broad spectrum flame retardant and is widely used in the production of rubber, textile, plastics and paint. De...展开 Decabromodiphenyl Oxide (DBDPO) is a white powder with an average particle size of 3µm and contains between 82-83% Br. It is primarily used as a broad spectrum flame retardant and is widely used in the production of rubber, textile, plastics and paint. Decabromodiphenyl Oxide is recommended for use in products containing polyethylene polypropylene, ABS resins, PBT resins, and rubber. 收起 | |
| Deep Chrome Yellow | Hainan Zhongxin Chemical Co., Ltd. | Deep Chrome Yellow is ZXY-3431 color type and P.Y. 34 color index number in orange/yellow powdered form. It is for use in paint and coatings, ink, stationery, rubber and plastics. | |
| Dibenzothiazole Disulfide | Hainan Zhongxin Chemical Co., Ltd. | Dibenzothiazole Disulfide MBTS (DM) is a plasticizer and delay agent in the production of chloroprene rubbers and sealants. It is provided as a gray-white to light yellow powder or granule, it is usually used together with secondary accelerator in the syn...展开 Dibenzothiazole Disulfide MBTS (DM) is a plasticizer and delay agent in the production of chloroprene rubbers and sealants. It is provided as a gray-white to light yellow powder or granule, it is usually used together with secondary accelerator in the synthesis of polymers. 收起 | |
| Diethylaminoethyl Methacrylate (DEAEMA) | Shanghai WellTone Material Technology Co., Ltd. | Diethylaminoethyl Methacrylate (DEAEMA) is a water-soluble, chemical raw ingredient in a colorless, transparent liquid form. This product is most commonly used to increase hydrophilicity, adhesion, and thermosetting properties in coating and adhesive pro...展开 Diethylaminoethyl Methacrylate (DEAEMA) is a water-soluble, chemical raw ingredient in a colorless, transparent liquid form. This product is most commonly used to increase hydrophilicity, adhesion, and thermosetting properties in coating and adhesive production applications. 收起 | |
| D.M.P. 30 | Synpol Products PVT. Ltd | D.M.P. 30 is a tertiary amine. This product has a viscosity of 2-5 cPs and a density of 0.9-1.0 g/cm3. D.M.P. 30 is most commonly used as a hardener in lamination and adhesive applications. | |
| Epichlorohydrin | Hainan Zhongxin Chemical Co., Ltd. | Epichlorohydrin is a clear colorless liquid with the molecular formula of CH2OCHCH2Cl, and is anywhere from 99.5% to 99.9% pure. It is primarily used for producing epoxy resin, synthetic glycerin, epichlorohydrin rubber, reinforced plastics, and electrica...展开 Epichlorohydrin is a clear colorless liquid with the molecular formula of CH2OCHCH2Cl, and is anywhere from 99.5% to 99.9% pure. It is primarily used for producing epoxy resin, synthetic glycerin, epichlorohydrin rubber, reinforced plastics, and electrical insulation products. Epichlorohydrin also can be used as solvent for cellulose ester, resin, and cellulose ether, and the raw material of plasticizers, stabilizers, surfactants, and chloroprene rubber. 收起 | |
| Epoxy Phenol B.G.E. | Synpol Products PVT. Ltd | Epoxy Phenol B.G.E. is a reactive diluent. This product has a density of 0.92-0.94 g/cm3. Epoxy Phenol B.G.E. is most commonly used in casting, encapsulation, and bonding applications. | |
| Epoxy Phenol CNSL | Synpol Products PVT. Ltd | Epoxy Phenol CNSL is a reactive diluent. This product has a density of 0.96-0.97 g/cm3. Epoxy Phenol CNSL is most commonly used in casting, encapsulation, and bonding applications. | |
| Epoxy Phenol P.G.E. | Synpol Products PVT. Ltd | Epoxy Phenol P.G.E. is a reactive diluent. This product has a density of 1.11-1.22 g/cm3. Epoxy Phenol P.G.E. is most commonly used in casting, encapsulation, and bonding applications. | |
| ExBar™ 200 | Excalibar Minerals LLC | ExBar™ 200 is a raw mineral material that is manufactured from natural barium sulfate ore. This product is used in many different applications such as paints, adhesives and sealants. It has a median particle size of 15.0u and an oil absorption of 9. | |
| ExBar™ 325 | Excalibar Minerals LLC | ExBar™ 325 is a raw mineral material that is manufactured from natural barium sulfate ore. This product is used in many different applications such as paints, adhesives and sealants. It has a median particle size of 10.0u and an oil absorption of 10. | |
| ExBar™ 400 | Excalibar Minerals LLC | ExBar™ 400 is a raw mineral material that is manufactured from natural barium sulfate ore. This product is used in many different applications such as paints, adhesives and sealants. It has a median particle size of 8.0u and an oil absorption of 12. | |
| ExBar™ W 1 | Excalibar Minerals LLC | ExBar™ W 1 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 1 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 1u and an oil absorption of 15. 收起 | |
| ExBar™ W 2 | Excalibar Minerals LLC | ExBar™ W 2 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 2 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 2u and an oil absorption of 13. 收起 | |
| ExBar™ W 3 | Excalibar Minerals LLC | ExBar™ W 3 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 3 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 3u and an oil absorption of 13. 收起 | |
| ExBar™ W 325 | Excalibar Minerals LLC | ExBar™ W 325 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are pr...展开 ExBar™ W 325 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. 收起 | |
| ExBar™ W 4 | Excalibar Minerals LLC | ExBar™ W 4 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 4 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 4u and an oil absorption of 12. 收起 | |
| ExBar™ W 400 | Excalibar Minerals LLC | ExBar™ W 400 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are pr...展开 ExBar™ W 400 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 8u and an oil absorption of 10. 收起 | |
| ExCal® 100 | Excalibar Minerals LLC | ExCal® 100 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications. | |
| ExCal® 200 | Excalibar Minerals LLC | ExCal® 200 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications. | |
| ExCal® 325 | Excalibar Minerals LLC | ExCal® 325 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications. | |
| ExCal® 400 | Excalibar Minerals LLC | ExCal® 400 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications. | |
| ExCal® CW 100 | Excalibar Minerals LLC | ExCal® CW 100 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand ar...展开 ExCal® CW 100 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand are a standard. 收起 | |
| ExCal® CW 200 | Excalibar Minerals LLC | ExCal® CW 200 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand ar...展开 ExCal® CW 200 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand are a standard. 收起 | |
| ExCal® CW 325 | Excalibar Minerals LLC | ExCal® CW 325 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand ar...展开 ExCal® CW 325 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand are a standard. 收起 | |
| EXOCOAT™ 143 | Axcentive Sarl | EXOCOAT® 143 by Axcentive is a solvent-based organometallic resin (60% solids in Butyl acetate). It is characterized by non-sticky, hydrophobic, and oleophobic properties. Provides strong adhesion to steel, aluminum, glass, and plastics like PMMA and ABS ...展开 EXOCOAT® 143 by Axcentive is a solvent-based organometallic resin (60% solids in Butyl acetate). It is characterized by non-sticky, hydrophobic, and oleophobic properties. Provides strong adhesion to steel, aluminum, glass, and plastics like PMMA and ABS as well as to old coating layers. It covalently bonds with the substrate resulting in a very durable finish. It can be used as a standalone resin or might be formulated with other raw materials like white and colored pigments, organic resins, fillers, and additives. The use of water-based raw materials should be avoided. Durability is a unique feature of EXOCOAT® 143. It can sustain mechanical abrasion, and chemical attack and is UV stable. When applied at a very low layer thickness of 0.5 to 2µm it provides the surface with a protective hard coating that shows durable easy-to-clean, dirt resistance, anti-graffiti, and strong water repellency properties. It is suitable for ambient or force-cured, high-performance industrial coatings such as protective, coil, marine, and automotive. EXOCOAT® 143-based paints may be brushed, rolled, or sprayed by HVLP or airless spray. 收起 | |
| EXOCOAT™ 151A | Axcentive Sarl | EXOCOAT® 151A by Axcentive is a photocatalytic nano-titanium oxide sol with a strong self-cleaning performance. The photocatalytic effect results in effective radical formation which breaks down organic matter like dirt and soil. Airborne particles like V...展开 EXOCOAT® 151A by Axcentive is a photocatalytic nano-titanium oxide sol with a strong self-cleaning performance. The photocatalytic effect results in effective radical formation which breaks down organic matter like dirt and soil. Airborne particles like VOCs, NOx, and biopollution are also eradicated by EXOCOAT® 151A. It can be used as a general air purifier. Though most effective in outdoor light conditions, it is adapted for use under visible light as found in the interior. In all cases, it should be used as a topcoat to ensure its full effect. Glass and walls coated with EXOCOAT® 151A are super hydrophilic enhancing water-sheeting, also called the wash-off effect. It may be used on other flat surfaces such as plastics or coated substrates yet only interior. It dries under room temperature conditions. Spray application is recommended to reach thin monolayers which prove to be more effective. It is listed with EINECS. TSCA, AICS, and CEPA. 收起 | |
| EXOCOAT™ 151B | Axcentive Sarl | EXOCOAT® 151B by Axcentive is a photocatalytic nano-titanium oxide sol with a strong self-cleaning performance. The photocatalytic effect results in effective radical formation which breaks down organic matter like dirt and soil. Airborne particles like V...展开 EXOCOAT® 151B by Axcentive is a photocatalytic nano-titanium oxide sol with a strong self-cleaning performance. The photocatalytic effect results in effective radical formation which breaks down organic matter like dirt and soil. Airborne particles like VOCs, NOx, and biopollution are also eradicated by EXOCOAT® 151B. In all cases, it should be used as a topcoat to ensure its full effect. EXOCOAT® 151B coated walls are super hydrophilic enhancing water-sheeting, also called the wash-off effect. It is targeted for porous substrates like concrete, brickwork, and gypsum. It is not meant for glass substrates. It dries under room temperature conditions. Brush, roller, or Spray application is recommended to reach homogeneous coatings. It is listed with EINECS. TSCA, AICS, and CEPA. 收起 | |
| EXOCOAT™ 161 | Axcentive Sarl | EXOCOAT® 161 by Axcentive is a multipurpose, high-performance coating resin. It is preceramic, as it cures the ceramic layer. Upon curing, it converts to an inorganic highly cross linked layer with excellent barrier properties, high durability, and extre...展开 EXOCOAT® 161 by Axcentive is a multipurpose, high-performance coating resin. It is preceramic, as it cures the ceramic layer. Upon curing, it converts to an inorganic highly cross linked layer with excellent barrier properties, high durability, and extreme hardness (9H). Offers chemical-, scratch-, oxidation resistance, and temperature resistance over 1000°C for prolonged time. It can function as stand-alone resin at a layer thickness of 0.5 to 2 µm to form a durable finish that can be easy to clean. It bonds to substrates such as steel, aluminum, glass, and old coating layers. It can be used as conversion coating replacing Cr(VI). It may be co-formulated with the most frequently used coating ingredients from the group of pigments, fillers, resins, additives, and (co-)solvents and creates colored, super hard, or matte surfaces. EXOCOAT® 161 is highly advised to be used in aprotic solvents. It has a shelf life of 6 months. 收起 | |
| EXOCOAT™ AC | Axcentive Sarl | EXOCOAT® AC by Axcentive is a hybrid sol-gel resin for anti-corrosive conversion coatings in 60% ethanol. It is covalently bonded to the surface and applied directly to metal (iron alloy, galvanized steel, phosphate steel, stainless steel, and aluminum). ...展开 EXOCOAT® AC by Axcentive is a hybrid sol-gel resin for anti-corrosive conversion coatings in 60% ethanol. It is covalently bonded to the surface and applied directly to metal (iron alloy, galvanized steel, phosphate steel, stainless steel, and aluminum). It functions as a replacement for the Cr3+ and Cr6+ based system as used in metal plating and automotive industries. It converts the metal hydroxide surface into a stable, inert covalently bound monolayer. It can also be used as micrometer-thin primers under conventional organic coatings. It can be overcoated by epoxy primer or polyurethane topcoat systems. EXOCOAT® AC is suitable for conventional low & high pressure airless and air-mixing spraying, dipping, rolling, and brushing. It has a shelf life of 12 months. 收起 | |
| EXOCOAT™ ACX-W | Axcentive Sarl | EXOCOAT® ACX-W by Axcentive is a water-dilutable nanoparticle-modified anticorrosive conversion coating that covalently bonds to the surface through nanoparticles. It is applied directly to metals (iron alloy, galvanized steel, phosphate steel, stainless ...展开 EXOCOAT® ACX-W by Axcentive is a water-dilutable nanoparticle-modified anticorrosive conversion coating that covalently bonds to the surface through nanoparticles. It is applied directly to metals (iron alloy, galvanized steel, phosphate steel, stainless steel, and aluminum). It converts the metal hydroxide surface into a stable, inert covalently bound monolayer. It is used as a replacement for chromium-based primers on aluminum and other metals. It can be used as a conversion primer for a coating system based on an epoxy coating and polyurethane topcoat. It may omit toxic chemicals and functions as a replacement for Cr3+ and Cr6+-based systems used in metal plating and aerospace industries. EXOCOAT® ACX-W is applied with conventional low-pressure and high-pressure airless and air-mix spraying, dipping, rolling and brushing. It has a shelf life of 12 months. 收起 | |
| EXOCOAT™ AM | Axcentive Sarl | EXOCOAT® AM by Axcentive is a water-based, doped nano-titanium oxide sol with a strong antimicrobial effect and anatase structure. It prevents the build-up of microbes as the photocatalytic effect results in effective radical formation which breaks down v...展开 EXOCOAT® AM by Axcentive is a water-based, doped nano-titanium oxide sol with a strong antimicrobial effect and anatase structure. It prevents the build-up of microbes as the photocatalytic effect results in effective radical formation which breaks down viruses and bacteria. It eradicates viruses such as influenza, SARS-COV-2, dengue & hepatitis and bacteria such as E. coli, MSRA, streptococcus, listeria, pneumonia, and salmonella. It is activated by light and displays quick drying at room temperature. Spray application is recommended to reach thin monolayers. It exhibits curing at room temperature up to 300°C and super hard particles (1GPa Vickers). It is easy to apply & durable, allowing longer disinfection intervals while preserving hygiene level. It shows non-silver leaching, efficacious even under low light conditions, lower service frequency, and no need for frequent disinfection routine. It is used in the state-of-the-art continuous antimicrobial coating for high-traffic areas. EXOCOAT® AM is suitable for topcoats for any surface inside buildings, stores, hospitals, and vehicles. The shelf life of this product is 9 months. 收起 | |
| EXOCOAT™ Clearview | Axcentive Sarl | EXOCOAT® Clearview by Axcentive is a 1K hybrid sol-gel system in ethanol. It has been designed for water-repellent, easy-to-clean coatings for glass and ceramic substrates. A substrate coated with EXOCOAT® Clearview will turn into a hard, water-repellent ...展开 EXOCOAT® Clearview by Axcentive is a 1K hybrid sol-gel system in ethanol. It has been designed for water-repellent, easy-to-clean coatings for glass and ceramic substrates. A substrate coated with EXOCOAT® Clearview will turn into a hard, water-repellent durable easy-to-clean surface. EXOCOAT® Clearview keeps windscreens clean from raindrops and improves vision drastically, especially in difficult wet road conditions, which can be experienced day and night. Besides, it can be used to make easy-to-clean, water shedding tiles and chrome for example used in kitchens and bathrooms. 收起 | |
| EXOCOAT™ Clearview-2 | Axcentive Sarl | EXOCOAT® Clearview-2 by Axcentive is a 2K hybrid sol-gel in ethanol. It is designed for durable water repellent, easy-to-clean, dirt resistant glass coatings. This solvent-based nanosystem can be applied in coatings for automotive windscreens, or glass ba...展开 EXOCOAT® Clearview-2 by Axcentive is a 2K hybrid sol-gel in ethanol. It is designed for durable water repellent, easy-to-clean, dirt resistant glass coatings. This solvent-based nanosystem can be applied in coatings for automotive windscreens, or glass bathroom doors. It can be applied as such or diluted, in coatings as a monolayer to obtain a very hard and durable hydrophobic surface. EXOCOAT® Clearview-2 keeps windows clean from raindrops and improves vision drastically, especially in difficult wet road conditions, which can be experienced day and night. In bathroom glass, it makes the water run down fast and avoids water spots. 收起 | |
| EXOCOAT™ SH | Axcentive Sarl | EXOCOAT® SH by Axcentive is an inorganic 1K superhydrophobic Sol-Gel system for breathable concrete and masonry sealers. It has extremely high water exclusion properties which helps to produce superhydrophobic coatings. It can be applied on concrete, pave...展开 EXOCOAT® SH by Axcentive is an inorganic 1K superhydrophobic Sol-Gel system for breathable concrete and masonry sealers. It has extremely high water exclusion properties which helps to produce superhydrophobic coatings. It can be applied on concrete, pavement, walls, and stucco to get the so-called Lotus Effect. The sol-gel system deposits superhydrophobic particles on the porous substrate. EXOCOAT® SH will not form a film and as a result, the wall stays breathable. With the contact angle of 145o water droplets bounce back from the surface and will roll down immediately upon touch. Thus, the wall remains dry, and clean and will behave as an efficient barrier against water. 收起 | |
| FR-245 2,4,6-Tris-(2,4,6-tribromophenoxy)-1,3,5-triazine | Hainan Zhongxin Chemical Co., Ltd. | FR-245 is 2,4,6-Tris-(2,4,6-tribromophenoxy)-1,3,5-triazine, synonymous with Tris(Tribromophenoxy)-S-Triazine and Tris(Tribromophenyl)Cyanurate and 2,4,6-Tris-(2,4,6-Tribromophenoxy)-1,3,5-Triazine, is a flame retardant additive used in the production of ...展开 FR-245 is 2,4,6-Tris-(2,4,6-tribromophenoxy)-1,3,5-triazine, synonymous with Tris(Tribromophenoxy)-S-Triazine and Tris(Tribromophenyl)Cyanurate and 2,4,6-Tris-(2,4,6-Tribromophenoxy)-1,3,5-Triazine, is a flame retardant additive used in the production of paints and plastics. FR-245 is recommend for use in multiple products including: ABS, HIPS, PS, PBT, PP, GF+ABS, GF+PS, GF+PBT, GF+HIPS and GF+PP. 收起 | |
| FR-52 Phenoxy-terminated Carbonate oligomer of tetrabromobisphenol A (TBBPA) | Hainan Zhongxin Chemical Co., Ltd. | FR-52 Phenoxy-terminated Carbonate oligomer of tetrabromobisphenol A (TBBPA) is a white powder that contains 52% Br Content. It is primarily used as a flame retardant additive in paints and plastics. FR-52 is recommended for use in: PBT, PET, PBT/PET blen...展开 FR-52 Phenoxy-terminated Carbonate oligomer of tetrabromobisphenol A (TBBPA) is a white powder that contains 52% Br Content. It is primarily used as a flame retardant additive in paints and plastics. FR-52 is recommended for use in: PBT, PET, PBT/PET blends, PC, ABS, ABS/PC blends, Polysulfone and SAN. 收起 | |
| FR-58 Phenoxy-Terminated Carbonate Oligomer of Tetrabromobisphenol A | Hainan Zhongxin Chemical Co., Ltd. | FR-58 Phenoxy-Terminated Carbonate Oligomer of Tetrabromobisphenol A, synonymous with Carbonicdichloride, polymerwith4,4-(1-methylethylidene)bis2, 6-dibromophenol, bis(2,4,6-tribromophenyl) ester, is a white powder with a bromine content of approximately ...展开 FR-58 Phenoxy-Terminated Carbonate Oligomer of Tetrabromobisphenol A, synonymous with Carbonicdichloride, polymerwith4,4-(1-methylethylidene)bis2, 6-dibromophenol, bis(2,4,6-tribromophenyl) ester, is a white powder with a bromine content of approximately 58%. It is primarily used as a flame retardant in paints and plastics. This product is recommended for use in PBT, PET, PBT/PET blends, PC, ABS, ABS/PC blends, Polysulfone and SAN. 收起 | |
| Fumaric Acid Tech Grade | Hainan Zhongxin Chemical Co., Ltd. | Fumaric acid, synonymous with trans-1,2-ethenedicarboxylic acid, is mainly used in the manufacture of synthetic resin and glass fiber-reinforced forced plastic with excellent heat stability. It can also be used as an insulation material. | |
| Greesol™ A04 A | Chem Additive (YueYang) Co.,Ltd. | Greesol™ A04 A is a multifunctional surfactant additive with wetting, foaming and dispersing properties. This is a non-ionic surfactant that can decrease surface tension, control foam and reduce water sensitivity. This product is well suited in the produc...展开 Greesol™ A04 A is a multifunctional surfactant additive with wetting, foaming and dispersing properties. This is a non-ionic surfactant that can decrease surface tension, control foam and reduce water sensitivity. This product is well suited in the production of waterborne industrial coatings, waterborne wood coatings, plastic water-based paint, water-based ink, water based varnish, pressure-sensitive adhesive, paint and dye manufacturing. It is a 2-Ethylhexanol solvent based product. 收起 | |
| Greesol™ A04 BC | Chem Additive (YueYang) Co.,Ltd. | Greesol™ A04 BC is a multifunctional surfactant additive with wetting, foaming and dispersing properties. This is a non-ionic surfactant that can decrease surface tension, control foam and reduce water sensitivity. This product is well suited in the produ...展开 Greesol™ A04 BC is a multifunctional surfactant additive with wetting, foaming and dispersing properties. This is a non-ionic surfactant that can decrease surface tension, control foam and reduce water sensitivity. This product is well suited in the production of waterborne industrial coatings, waterborne wood coatings, plastic water-based paint, water-based ink, water based varnish, pressure-sensitive adhesive, paint and dye manufacturing. It is a 2-Butoxylethanol solvent based product. 收起 | |
| Greesol™ A04 DPM | Chem Additive (YueYang) Co.,Ltd. | Greesol™ A04 DPM is a multifunctional surfactant additive with wetting, foaming and dispersing properties. This is a non-ionic surfactant that can decrease surface tension, control foam and reduce water sensitivity. This product is well suited in the prod...展开 Greesol™ A04 DPM is a multifunctional surfactant additive with wetting, foaming and dispersing properties. This is a non-ionic surfactant that can decrease surface tension, control foam and reduce water sensitivity. This product is well suited in the production of waterborne industrial coatings, waterborne wood coatings, plastic water-based paint, water-based ink, water based varnish, pressure-sensitive adhesive, paint and dye manufacturing. It is a Dipropandiol monomethanol ether solvent based product. 收起 | |
| Greesol™ A04 E | Chem Additive (YueYang) Co.,Ltd. | Greesol™ A04 E is a multifunctional surfactant additive with wetting, foaming and dispersing properties. This is a non-ionic surfactant that can decrease surface tension, control foam and reduce water sensitivity. This product is well suited in the produc...展开 Greesol™ A04 E is a multifunctional surfactant additive with wetting, foaming and dispersing properties. This is a non-ionic surfactant that can decrease surface tension, control foam and reduce water sensitivity. This product is well suited in the production of waterborne industrial coatings, waterborne wood coatings, plastic water-based paint, water-based ink, water based varnish, pressure-sensitive adhesive, paint and dye manufacturing. It is a Ethandiol solvent based product. 收起 | |
| Greesol™ A04 NP | Chem Additive (YueYang) Co.,Ltd. | Greesol™ A04 NP is a multifunctional surfactant additive with wetting, foaming and dispersing properties. This is a non-ionic surfactant that can decrease surface tension, control foam and reduce water sensitivity. This product is well suited in the produ...展开 Greesol™ A04 NP is a multifunctional surfactant additive with wetting, foaming and dispersing properties. This is a non-ionic surfactant that can decrease surface tension, control foam and reduce water sensitivity. This product is well suited in the production of waterborne industrial coatings, waterborne wood coatings, plastic water-based paint, water-based ink, water based varnish, pressure-sensitive adhesive, paint and dye manufacturing. It is a Propanol solvent based product. 收起 | |
| Greesol™ A04 PA | Chem Additive (YueYang) Co.,Ltd. | Greesol™ A04 PA is a multifunctional surfactant additive with wetting, foaming and dispersing properties. This is a non-ionic surfactant that can decrease surface tension, control foam and reduce water sensitivity. This product is well suited in the produ...展开 Greesol™ A04 PA is a multifunctional surfactant additive with wetting, foaming and dispersing properties. This is a non-ionic surfactant that can decrease surface tension, control foam and reduce water sensitivity. This product is well suited in the production of waterborne industrial coatings, waterborne wood coatings, plastic water-based paint, water-based ink, water based varnish, pressure-sensitive adhesive, paint and dye manufacturing. It is a Isopropanol solvent based product. 收起 | |
| Greesol™ A04 PG | Chem Additive (YueYang) Co.,Ltd. | Greesol™ A04 PG is a multifunctional surfactant additive with wetting, foaming and dispersing properties. This is a non-ionic surfactant that can decrease surface tension, control foam and reduce water sensitivity. This product is well suited in the produ...展开 Greesol™ A04 PG is a multifunctional surfactant additive with wetting, foaming and dispersing properties. This is a non-ionic surfactant that can decrease surface tension, control foam and reduce water sensitivity. This product is well suited in the production of waterborne industrial coatings, waterborne wood coatings, plastic water-based paint, water-based ink, water based varnish, pressure-sensitive adhesive, paint and dye manufacturing. It is a Propandiol solvent based product. 收起 | |
| Greesol™ A04 SQR | Chem Additive (YueYang) Co.,Ltd. | Greesol™ A04 SQR is a multifunctional surfactant additive with wetting, foaming and dispersing properties. This is a non-ionic surfactant that can decrease surface tension, control foam and reduce water sensitivity. This product is well suited in the prod...展开 Greesol™ A04 SQR is a multifunctional surfactant additive with wetting, foaming and dispersing properties. This is a non-ionic surfactant that can decrease surface tension, control foam and reduce water sensitivity. This product is well suited in the production of waterborne industrial coatings, waterborne wood coatings, plastic water-based paint, water-based ink, water based varnish, pressure-sensitive adhesive and paint and dye manufacturing. It is a solvent based product according to user needs. 收起 | |
| Greesol™ A06 DPM | Chem Additive (YueYang) Co.,Ltd. | Greesol™ A06 DPM is a multifunctional surfactant wetting agent. This product is well suited for use in the production of waterborne industrial coatings, wood lacquers, plastic coatings, flexo ink, intaglio ink, OPV, laminating adhesive, plastic coatings, ...展开 Greesol™ A06 DPM is a multifunctional surfactant wetting agent. This product is well suited for use in the production of waterborne industrial coatings, wood lacquers, plastic coatings, flexo ink, intaglio ink, OPV, laminating adhesive, plastic coatings, and printing inks. This product contains 55% dipropylene glycol monomethyl ether based solvent. 收起 | |
| Greesol™ A06 E | Chem Additive (YueYang) Co.,Ltd. | Greesol™ A06 E is a multifunctional surfactant wetting agent. This product is well suited for use in the production of waterborne industrial coatings, wood lacquers, plastic coatings, flexo ink, intaglio ink, OPV, laminating adhesive, plastic coatings, an...展开 Greesol™ A06 E is a multifunctional surfactant wetting agent. This product is well suited for use in the production of waterborne industrial coatings, wood lacquers, plastic coatings, flexo ink, intaglio ink, OPV, laminating adhesive, plastic coatings, and printing inks. This product contains 55% dipropylene glycol monomethyl ether based solvent. 收起 | |
| Greesol™ A06 PA | Chem Additive (YueYang) Co.,Ltd. | Greesol™ A06 PA is a multifunctional surfactant wetting agent. This product is well suited for use in the production of waterborne industrial coatings, wood lacquers, plastic coatings, flexo ink, intaglio ink, OPV, laminating adhesive, plastic coatings, a...展开 Greesol™ A06 PA is a multifunctional surfactant wetting agent. This product is well suited for use in the production of waterborne industrial coatings, wood lacquers, plastic coatings, flexo ink, intaglio ink, OPV, laminating adhesive, plastic coatings, and printing inks. This product contains 55% dipropylene glycol monomethyl ether based solvent. 收起 | |
| Greesol™ A06 SQR | Chem Additive (YueYang) Co.,Ltd. | Greesol™ A06 SQR is a multifunctional surfactant wetting agent. This product is well suited for use in the production of waterborne industrial coatings, wood lacquers, plastic coatings, flexo ink, intaglio ink, OPV, laminating adhesive, plastic coatings, ...展开 Greesol™ A06 SQR is a multifunctional surfactant wetting agent. This product is well suited for use in the production of waterborne industrial coatings, wood lacquers, plastic coatings, flexo ink, intaglio ink, OPV, laminating adhesive, plastic coatings, and printing inks. The dipropylene glycol monomethyl ether percentage can be customized per request. 收起 | |
| Greesol™ ASE | Chem Additive (YueYang) Co.,Ltd. | Greesol™ ASE surfactant is a gemini based nonionic additive that can reduce static surface tension and dynamic surface tension of waterborne systems. This product is well suited in the production of waterborne industrial coatings, wood lacquers, plastic c...展开 Greesol™ ASE surfactant is a gemini based nonionic additive that can reduce static surface tension and dynamic surface tension of waterborne systems. This product is well suited in the production of waterborne industrial coatings, wood lacquers, plastic coatings, flexo ink, intaglio ink, OPV and laminating adhesives. 收起 | |
| Greesol™ DF11 | Chem Additive (YueYang) Co.,Ltd. | Greesol™ DF11 is a non-silicone, mineral oil-free defoamer. It is characterized as possessing persistent foam suppression. This product is well suited for use in the production of waterborne industrial coatings, wood lacquers, plastic coatings, flexo inks...展开 Greesol™ DF11 is a non-silicone, mineral oil-free defoamer. It is characterized as possessing persistent foam suppression. This product is well suited for use in the production of waterborne industrial coatings, wood lacquers, plastic coatings, flexo inks, intaglio inks, OPV, and laminating adhesives. 收起 | |
| Greesol™ DF42 | Chem Additive (YueYang) Co.,Ltd. | Greesol™ DF42 is a silica-based defoamer. This miscible product is well suited for use in paints, inks, emulsion polymerization processes, and adhesive foam control. | |
| Greesol™ DF901 | Chem Additive (YueYang) Co.,Ltd. | Greesol™ DF901 is a miscible polyether modified silicone water-based defoamer. Its content of non-volatile substances is 85%. This product is well suited for the production of fountain solutions, metal cleaners, inkjet inks, adhesives, water-based inks, a...展开 Greesol™ DF901 is a miscible polyether modified silicone water-based defoamer. Its content of non-volatile substances is 85%. This product is well suited for the production of fountain solutions, metal cleaners, inkjet inks, adhesives, water-based inks, and OPV. 收起 | |
| Greesol™ DF975 | Chem Additive (YueYang) Co.,Ltd. | Greesol™ DF975 is a polyether modified silicone water-based defoamer. Its content of non-volatile substances is 100%. This product is well suited for the production of fountain solutions, metal cleaners, inkjet inks, adhesives, water-based inks, and OPV. | |
| Greesol™ DFM | Chem Additive (YueYang) Co.,Ltd. | Greesol™ DFM is a polyether modified silicone water-based defoamer. Its content of non-volatile substances is 60%. This product is well suited for use in the production of fountain solutions, metal cleaners, inkjet inks, adhesives, water-based inks, OPV. | |
| Greesol™ DP1600 | Chem Additive (YueYang) Co.,Ltd. | Greesol™ DP1600 is a wetting and dispersing agent that can be applied in resin and resin-free colorant systems. It has anionic and non-ionic properties. This product has a low viscosity and is suitable for carbon black and organic pigment dispersion. Its ...展开 Greesol™ DP1600 is a wetting and dispersing agent that can be applied in resin and resin-free colorant systems. It has anionic and non-ionic properties. This product has a low viscosity and is suitable for carbon black and organic pigment dispersion. Its active ingredient content is 80%. 收起 | |
| Greesol™ DPB | Chem Additive (YueYang) Co.,Ltd. | Greesol™ DPB is a non-ionic class wetting and dispersing agent that can be applied in resin and resin-free colorant systems. It has a Low viscosity and is suitable for carbon black and organic pigment dispersion. Its active ingredient content is 100% | |
| Greesol™ E20 | Chem Additive (YueYang) Co.,Ltd. | Greesol™ E20 is a multifunctional surfactant and gemini nonionic surfactant containing 20% of ethylene oxide. It is widely applied to waterborne printing ink. This product is well suit for use in fountain solutions for offset printing applications. This p...展开 Greesol™ E20 is a multifunctional surfactant and gemini nonionic surfactant containing 20% of ethylene oxide. It is widely applied to waterborne printing ink. This product is well suit for use in fountain solutions for offset printing applications. This product will not cause rubber roller swelling. 收起 | |
| Greesol™ E40 | Chem Additive (YueYang) Co.,Ltd. | Greesol™ E40 is a multifunctional surfactant and gemini nonionic surfactant containing 40% of ethylene oxide. It can be used to improve the coatability of low surface energy substrates such as silane, release paper or plastic film. This product is well su...展开 Greesol™ E40 is a multifunctional surfactant and gemini nonionic surfactant containing 40% of ethylene oxide. It can be used to improve the coatability of low surface energy substrates such as silane, release paper or plastic film. This product is well suit for use in fountain solutions for offset printing applications. This product will not cause rubber roller swelling. 收起 | |
| Greesol™ E65 | Chem Additive (YueYang) Co.,Ltd. | Greesol™ E65 is a multifunctional surfactant and gemini nonionic surfactant containing 65% of ethylene oxide and has wetting, defoaming, flow and leveling capabilities. It can be used to improve in the fluency of dye-based and pigment-based ink jet ink. T...展开 Greesol™ E65 is a multifunctional surfactant and gemini nonionic surfactant containing 65% of ethylene oxide and has wetting, defoaming, flow and leveling capabilities. It can be used to improve in the fluency of dye-based and pigment-based ink jet ink. This product can also be use as a gloss agent in a electroplating and pickling solution. 收起 | |
| Greesol™ E85 | Chem Additive (YueYang) Co.,Ltd. | Greesol™ E85 is a multifunctional surfactant and gemini nonionic surfactant containing 85% of ethylene oxide. It can be used to improve in the fluency of dye-based and pigment-based ink jet ink. This product can be also be used as a gloss agent in a elect...展开 Greesol™ E85 is a multifunctional surfactant and gemini nonionic surfactant containing 85% of ethylene oxide. It can be used to improve in the fluency of dye-based and pigment-based ink jet ink. This product can be also be used as a gloss agent in a electroplating and pickling solution. 收起 | |
| Greesol™ F06 | Chem Additive (YueYang) Co.,Ltd. | Greesol™ F06 is a silicone-based surfactant that reduces surface tension and provides good wetting spreadability. This product is well suited for the production of waterborne industrial coatings, wood lacquers, plastic coatings, flexo ink, intaglio ink, a...展开 Greesol™ F06 is a silicone-based surfactant that reduces surface tension and provides good wetting spreadability. This product is well suited for the production of waterborne industrial coatings, wood lacquers, plastic coatings, flexo ink, intaglio ink, and OPV. 收起 | |
| Greesol™ F07 | Chem Additive (YueYang) Co.,Ltd. | Greesol™ F07 surfactant is a gemini low-foam nonionic wetting agent. It can reduce static surface tension and dynamic surface tension to promote the wetting of base materials of many waterborne systems. This product can be used in the production of waterb...展开 Greesol™ F07 surfactant is a gemini low-foam nonionic wetting agent. It can reduce static surface tension and dynamic surface tension to promote the wetting of base materials of many waterborne systems. This product can be used in the production of waterborne industrial coatings, wood lacquers, plastic coatings, flexo ink, intaglio ink, and OPV. 收起 | |
| Greesol™ FS85 | Chem Additive (YueYang) Co.,Ltd. | Greesol™ FS85 surfactant is a gemini based nonionic additive that can reduce static surface tension and dynamic surface tension of waterborne systems and is specially developed for fountain solutions with little to no alcohol content. This product is suit...展开 Greesol™ FS85 surfactant is a gemini based nonionic additive that can reduce static surface tension and dynamic surface tension of waterborne systems and is specially developed for fountain solutions with little to no alcohol content. This product is suitable for use in commercial printing presses, and been shown to be effective in clear edge of printing dots and does not cause excessive ink emulsion in ink jet inks. 收起 | |
| Greesol™ LE5 | Chem Additive (YueYang) Co.,Ltd. | Greesol™ LE5 is a water-dispersible leveling agent. This product is a multifunctional additive that reduces friction and is abrasion resistant. This product is well suited for the production of fountain solutions, metal cleaners, inkjet inks, adhesives, w...展开 Greesol™ LE5 is a water-dispersible leveling agent. This product is a multifunctional additive that reduces friction and is abrasion resistant. This product is well suited for the production of fountain solutions, metal cleaners, inkjet inks, adhesives, water-based inks, and OPV. 收起 | |
| Greesol™ LE7 | Chem Additive (YueYang) Co.,Ltd. | Greesol™ LE7 is a polyorganosiloxane leveling agent that can improve paint flow, reduce cellulite, improve brightness, prevent air bubbles and pinholes. The content of non-volatile substances is 40%. This product is well suited for use in the production o...展开 Greesol™ LE7 is a polyorganosiloxane leveling agent that can improve paint flow, reduce cellulite, improve brightness, prevent air bubbles and pinholes. The content of non-volatile substances is 40%. This product is well suited for use in the production of fountain solutions, metal cleaners, inkjet inks, adhesives, water-based inks, and OPV. 收起 | |
| Greesol™ LE8 | Chem Additive (YueYang) Co.,Ltd. | Greesol™ LE8 is a ultra-high molecular weight polyether silicone leveling agent. It can be used for UV and aqueous formulation systems. It has a low friction coefficient, smooth feel, good leveling, low foam stability, and resistance to shrinkage. The con...展开 Greesol™ LE8 is a ultra-high molecular weight polyether silicone leveling agent. It can be used for UV and aqueous formulation systems. It has a low friction coefficient, smooth feel, good leveling, low foam stability, and resistance to shrinkage. The content of non-volatile substances is 40%. This product is well suited for use in the production of fountain solutions, metal cleaners, inkjet inks, adhesives, water-based inks, and OPV. 收起 |
