| Synpol 220 | Synpol Products PVT. Ltd | Synpol 220 is a bisphenol A-based, unmodified reactive diluent. This product has a viscosity at 25°C of 180-200 Poises. Synpol 220 is most commonly used in coating, lamination, and adhesive applications. | |
| Synpol 230 | Synpol Products PVT. Ltd | Synpol 230 is a bisphenol A-based, unmodified plasticizer. This product has a viscosity at 25°C of 230-250 Poises. Synpol 230 is most commonly used in coating, lamination, and adhesive applications. | |
| Synpol 280 | Synpol Products PVT. Ltd | Synpol 280 is a bisphenol A-based, unmodified epoxy resin. This product has a density of 1.18-1.19 g/cm3. Synpol 280 is most commonly used in high-solids coating, adhesive, and lamination applications. | |
| Synpol 280 | Synpol Products PVT. Ltd | Synpol 280 is a bisphenol A-based, unmodified plasticizer. This product has a density of 1.22-1.24 g/cm3. Synpol 280 is most commonly used in heat-resistant laminate, electrical casting, adhesive, and coating applications. | |
| Synpol 4000 | Synpol Products PVT. Ltd | Synpol 4000 is a bisphenol A-based, unmodified plasticizer. This product has a density of 1.18-1.19 g/cm3 and a melting point of 145-155ºC. Synpol 4000 is most commonly used in thermosetting bake finish and chemical-resistant container coating application...展开 Synpol 4000 is a bisphenol A-based, unmodified plasticizer. This product has a density of 1.18-1.19 g/cm3 and a melting point of 145-155ºC. Synpol 4000 is most commonly used in thermosetting bake finish and chemical-resistant container coating applications where increased substrate adhesion is required. 收起 | |
| Synpol 450XX | Synpol Products PVT. Ltd | Synpol 450XX is a bisphenol A-based, unmodified epoxy resin. This product has a density of 1.07-1.09 g/cm3. Synpol 450XX is most commonly used in chemical-resistant, air-dry, and bake coating applications. | |
| Synpol 5545 | Synpol Products PVT. Ltd | Synpol 5545 is a linseed fatty acid-modified epoxy ester. This product has a density of 0.92-0.93 g/cm3. Synpol 5545 is most commonly used in air-drying maintenance finish applications. | |
| Synpol 6040 | Synpol Products PVT. Ltd | Synpol 6040 is a soya fatty acid-modified epoxy ester. This product has a density of 0.96-0.97 g/cm3. Synpol 6040 is most commonly used in clear and pigmented electronic and appliance finish applications. | |
| Synpol 900 | Synpol Products PVT. Ltd | Synpol 900 is a bisphenol A-based, unmodified epoxy resin. This product has a density of 1.18-1.19 g/cm3 and a melting point 95-105ºC. Synpol 900 is most commonly used in air-dry and bake finish, as well as powder coating applications. | |
| Synpol AT-67 | Synpol Products PVT. Ltd | Synpol AT-67 is an acrylic copolymer solution. This product has a density of 1.02-1.03 g/cm3 and a total non-volatile content of 56-60%. Synpol AT-67 is most commonly used in high-performance coating applications. | |
| Synpol AT-68 | Synpol Products PVT. Ltd | Synpol AT-68 is an acrylic copolymer solution. This product has a density of 1.01-1.03 g/cm3 and a total non-volatile content of 58-62%. Synpol AT-68 is most commonly used in flexible paint applications. | |
| Synpol AT-70 | Synpol Products PVT. Ltd | Synpol AT-70 is an acrylic copolymer solution. This product has a density of 0.98-0.99 g/cm3 and a total non-volatile content of 58-62%. Synpol AT-70 is most commonly used in metal finish applications. | |
| Synpol B-10 | Synpol Products PVT. Ltd | Synpol B-10 is a thermoplastic homopolymer acrylic resin solution. This product has a density of 0.98-0.99 g/cm3 and a total non-volatile content of 38-42%. Synpol B-10 is most commonly used in screen printing, vinyl coating, plastic coating, gravure pr...展开 Synpol B-10 is a thermoplastic homopolymer acrylic resin solution. This product has a density of 0.98-0.99 g/cm3 and a total non-volatile content of 38-42%. Synpol B-10 is most commonly used in screen printing, vinyl coating, plastic coating, gravure printing ink, and PVC coating primer applications. 收起 | |
| Synpol B-30 | Synpol Products PVT. Ltd | Synpol B-30 is a polyvinyl butyral resin in a clear water white-colored, free flowing, granular form. This product has a density at 25°C of 1.05-1.15 g/cm3. Synpol B-30 is most commonly used in metal, textile, paper and foil coating, thermosetting and h...展开 Synpol B-30 is a polyvinyl butyral resin in a clear water white-colored, free flowing, granular form. This product has a density at 25°C of 1.05-1.15 g/cm3. Synpol B-30 is most commonly used in metal, textile, paper and foil coating, thermosetting and hot-melt adhesive, wood finish, and printing ink applications. 收起 | |
| Synpol B-60 | Synpol Products PVT. Ltd | Synpol B-60 is a polyvinyl butyral resin in a clear water white-colored, free flowing, granular form. This product has a density at 25°C of 1.05-1.15 g/cm3 and a softening point of 51-55°C. Synpol B-60 is most commonly used in metal, textile, paper and ...展开 Synpol B-60 is a polyvinyl butyral resin in a clear water white-colored, free flowing, granular form. This product has a density at 25°C of 1.05-1.15 g/cm3 and a softening point of 51-55°C. Synpol B-60 is most commonly used in metal, textile, paper and foil coating, thermosetting and hot-melt adhesive, wood finish, and printing ink applications. 收起 | |
| Synpol B-722 | Synpol Products PVT. Ltd | Synpol B-722 is a thermoplastic homopolymer acrylic resin solution. This product has a density of 0.99-1.00 g/cm3 and a total non-volatile content of 48-52%. Synpol B-722 is most commonly used in acrylic lacquer, wood lacquer, ink, and PVC coating appli...展开 Synpol B-722 is a thermoplastic homopolymer acrylic resin solution. This product has a density of 0.99-1.00 g/cm3 and a total non-volatile content of 48-52%. Synpol B-722 is most commonly used in acrylic lacquer, wood lacquer, ink, and PVC coating applications. 收起 | |
| Synpol B-723 | Synpol Products PVT. Ltd | Synpol B-723 is a thermoplastic homopolymer acrylic resin solution. This product has a density of 0.95-0.96 g/cm3 and a total non-volatile content of 38-42%. Synpol B-723 is most commonly used in metal, vinyl, and plastic coating, as well as aluminium l...展开 Synpol B-723 is a thermoplastic homopolymer acrylic resin solution. This product has a density of 0.95-0.96 g/cm3 and a total non-volatile content of 38-42%. Synpol B-723 is most commonly used in metal, vinyl, and plastic coating, as well as aluminium lacquer applications. 收起 | |
| Synpol BG-40 | Synpol Products PVT. Ltd | Synpol BG-40 is a butylated UF amino resin. This product has a non-volatile compound content of 72-76% and a density at 25°C of 1.01-1.03 g/cm3. Synpol BG-40 is most commonly used in high-gloss stoving enamel applications. | |
| Synpol L-9 | Synpol Products PVT. Ltd | Synpol L-9 is a butylated phenolic formaledyde resin. This product has a density of 0.98-0.99 g/cm3 and a total non-volatile content of 58-62%. Synpol L-9 is most commonly used in etch primer, adhesive, insulating varnish, and wire enamel applications. | |
| Synpol L-97 | Synpol Products PVT. Ltd | Synpol L-97 is a butylated phenolic formaldehyde resin. This product has a density of 0.98-0.99 g/cm3 and a total non-volatile content of 58-62%. Synpol L-97 is most commonly used in etch primer, adhesive, insulating varnish, and wire enamel applications. | |
| Synpol M-70 | Synpol Products PVT. Ltd | Synpol M-70 is a butylated MF amino resin. This product has a non-volatile compound content of 68-72% and a density at 25°C of 1.01-1.03 g/cm3. Synpol M-70 is most commonly used in flexible lacquer applications. | |
| Synpol MF-268 | Synpol Products PVT. Ltd | Synpol MF-268 is a butylated MF amino resin. This product has a non-volatile compound content of 58-62% and a density at 25°C of 1.01-1.03 g/cm3. Synpol MF-268 is most commonly used in stoving enamel applications. | |
| Synpol MF-310 | Synpol Products PVT. Ltd | Synpol MF-310 is a butylated MF amino resin. This product has a non-volatile compound content of 58-62% and a density at 25°C of 1.01-1.03 g/cm3. Synpol MF-310 is most commonly used in high-gloss enamel applications. | |
| Synpol PR-10/B | Synpol Products PVT. Ltd | Synpol PR-10/B is an alkyl phenol formaldehyde thermosetting resin in a pale yellow solid form. This product is most commonly used in spar varnish, marine finish, wood varnish, rubber-based adhesive, and electrical insulating varnish applications. | |
| Synpol SK-10 | Synpol Products PVT. Ltd | Synpol SK-10 is a ketone formaldehyde resin. This product has a hydroxyl value of 250-320 mgKOH/g. Synpol SK-10 is most commonly used in NC lacquer, printing ink, and surface coating applications. | |
| Synpol US-8 | Synpol Products PVT. Ltd | Synpol US-8 is a butylated UF amino resin. This product has a non-volatile compound content of 58-60% and a density at 25°C of 1.01-1.03 g/cm3. Synpol US-8 is most commonly used in wood lacquer applications. | |
| tert.-Amyl alcohol | BASF SE, Intermediates Division 巴斯夫中间体 | 涂料的特殊溶剂。叔戊醇适合双组分聚氨酯涂料（汽车修补漆、塑胶涂料）。它可增加双组分涂料的开罐使用时间 | |
| tert.-Butylvinylether, t-BVE | BASF SE, Intermediates Division 巴斯夫中间体 | 乙烯基氯共聚物的单体。聚合物中的T-丁基乙烯基基团可轻易地转移为羟基官能团（保护基团） | |
| TMP (Hydro)® Trimethylol-propane | BASF SE, Intermediates Division 巴斯夫中间体 | 醇酸树脂、饱和和不饱和聚酯、聚氨酯的基础原料，可作为水性油漆助剂和烷氧基化的主链分子。基于三甲基丙烷的醇酸和聚酯适用于溶剂型油漆（烤漆、双组分油漆、易拉罐涂料和卷材涂料），也可用于水性漆 | |
| Toplin P Linseed Oil | ADM | Toplin P Linseed Oil, in the form of amber clear liquid, is a refined LSO, kettle, with pentaerythritol polymer and maleic anhydride. It is fast bodying, fast drying, and improves water resistance over straight oils. Toplin P Linseed Oil substitutes tung ...展开 Toplin P Linseed Oil, in the form of amber clear liquid, is a refined LSO, kettle, with pentaerythritol polymer and maleic anhydride. It is fast bodying, fast drying, and improves water resistance over straight oils. Toplin P Linseed Oil substitutes tung oil in varnishes, resins, hardboard, and printing inks. 收起 | |
| Toplin P With Driers Linseed Oil | ADM | Toplin P with Driers Linseed Oil, in the form of amber clear liquid, is a refined LSO, kettle, with pentaerythritol polymer and maleic anhydride. It is fast bodying, fast drying, and improves water resistance over straight oils. Toplin P with Driers Linse...展开 Toplin P with Driers Linseed Oil, in the form of amber clear liquid, is a refined LSO, kettle, with pentaerythritol polymer and maleic anhydride. It is fast bodying, fast drying, and improves water resistance over straight oils. Toplin P with Driers Linseed Oil substitutes tung oil in varnishes, resins, hardboard, and printing inks. 收起 | |
| Toplin X-Z Linseed Oil | ADM | Toplin X-Z Linseed Oil, in the form of amber clear liquid, is a refined LSO, kettle, with pentaerythritol polymer and maleic anhydride. It is fast bodying, fast drying, and improves water resistance over straight oils. Toplin P with Driers Linseed Oil sub...展开 Toplin X-Z Linseed Oil, in the form of amber clear liquid, is a refined LSO, kettle, with pentaerythritol polymer and maleic anhydride. It is fast bodying, fast drying, and improves water resistance over straight oils. Toplin P with Driers Linseed Oil substitutes tung oil in varnishes, resins, hardboard, and printing inks. 收起 | |
| Triethylamine anhydrous | BASF SE, Intermediates Division 巴斯夫中间体 | 异氰酸酯反应催化剂，阴离子稳定的水性树脂中和剂。三乙胺可作为催化剂用于合成聚氨酯和双组分油漆。三乙胺适合作为中和剂用于基于聚酯、醇酸、丙烯酸树脂和含羧基或其它酸基团的聚氨酯水性油漆 | |
| Triethyleneglycol di vinyl ether, DVE-3 | BASF SE, Intermediates Division 巴斯夫中间体 | 三缩乙二醇二乙烯醚是一种活性稀释剂，适合不饱和聚酯、UV涂料、UV油墨、UV胶粘剂和离型涂料。与聚丙烯酸酯聚合物交联可用作离子交换树脂。是硫基密封剂化合物的基础原料。三缩乙二醇二乙烯醚可应用于UV涂料（木器、印刷油墨）和UV胶粘剂 | |
| Triphenylphosphine | BASF SE, Intermediates Division 巴斯夫中间体 | 环氧反应催化剂。三苯基膦可用于树脂生产，例如用于CED涂料的环氧改性 | |
| Varnish Linseed Oil | ADM | Varnish Linseed Oil, in the form of amber clear liquid, is break free, takes good heat bleach, and has good color retention on long heating. It has applications in grinding oils, resins, enamels, varnishes, and driers. | |
| White Refined Linseed Oil | ADM | White Refined Linseed Oil, in the form of amber clear liquid, is uniform alkali refined oil with linseed fatty acids. It has light color, low acidity, and has recommended applications in grinding reactive pigments and letting down whites and light tints. | |
| X-Craft® 4 | ChainCraft | X-Craft® 4 is pure butyric acid derived from renewable materials for direct use in various chemical applications or conversion into specific derivatives such as alcohols or esters. The butyric acid is naturally produced through non-GMO fermentation of pla...展开 X-Craft® 4 is pure butyric acid derived from renewable materials for direct use in various chemical applications or conversion into specific derivatives such as alcohols or esters. The butyric acid is naturally produced through non-GMO fermentation of plant-based food residues at the ChainCraft facility and is adhering to stringent quality standards. This biobased product possesses a moderate level of acidity and is characterized by the distinctive aroma of butyric acid. X-Craft® 4 is purified with cutting-edge technologies, resulting in a clear liquid ideal for chemical applications. 收起 | |
| X-Craft® 5 | ChainCraft | X-Craft® 5 is pure valeric acid derived from renewable materials for direct use in various chemical applications or conversion into specific derivatives such as alcohols or esters. The valeric acid is naturally produced through non-GMO fermentation of pla...展开 X-Craft® 5 is pure valeric acid derived from renewable materials for direct use in various chemical applications or conversion into specific derivatives such as alcohols or esters. The valeric acid is naturally produced through non-GMO fermentation of plant-based food residues at the ChainCraft facility and is adhering to stringent quality standards. This biobased product possesses a moderate level of acidity and is characterized by the distinctive aroma of valeric acid. X-Craft® 5 is purified with cutting-edge technologies resulting in a clear liquid ideal for chemical applications. 收起 | |
| X-Craft® 6 | ChainCraft | X-Craft® 6 is pure caproic acid derived from renewable materials for direct use in various chemical applications or conversion into specific derivatives such as alcohols or esters. The caproic acid is naturally produced through non-GMO fermentation of pla...展开 X-Craft® 6 is pure caproic acid derived from renewable materials for direct use in various chemical applications or conversion into specific derivatives such as alcohols or esters. The caproic acid is naturally produced through non-GMO fermentation of plant-based food residues at the ChainCraft facility and is adhering to stringent quality standards. This biobased product possesses a moderate level of acidity and is characterized by the distinctive aroma of caproic acid. X-Craft® 6 is purified with cutting-edge technologies resulting in a clear liquid ideal for chemical applications. 收起 | |
| X-Craft® 68 | ChainCraft | X-Craft® 68 is a unique blend of Medium Chain Fatty Acids (MCFA), primarily composed of caproic acid for direct use in various chemical applications or conversion into specific derivatives such as alcohols or esters. Other fatty acids present in the mixtu...展开 X-Craft® 68 is a unique blend of Medium Chain Fatty Acids (MCFA), primarily composed of caproic acid for direct use in various chemical applications or conversion into specific derivatives such as alcohols or esters. Other fatty acids present in the mixture are heptanoic and caprylic acid, giving the product its unique characteristics. X-Craft® 68 is naturally produced through non-GMO fermentation of plant-based food residues at the ChainCraft facility and is adhering to stringent quality standards. This circular blend possesses a moderate level of acidity and is characterized by its robust aroma. X-Craft® 68 is purified with cutting-edge technologies resulting in a clear liquid. 收起 |
