| Allyl Pentaerythritol | Perstorp | Allyl Pentaerythritol (APE) is mainly used as a crosslinker in various acrylic polymers used as thickeners. | |
| BEPD 70L | Perstorp | BEPD 70L has two primary hydroxyl groups and is a mixture of 70% BEPD, 25% NEO, and 5% water. It is a clear and colorless liquid at room temperature. BEPD 70L can be used in saturated polyesters for can and coil coatings, high-solid coatings, and powder c...展开 BEPD 70L has two primary hydroxyl groups and is a mixture of 70% BEPD, 25% NEO, and 5% water. It is a clear and colorless liquid at room temperature. BEPD 70L can be used in saturated polyesters for can and coil coatings, high-solid coatings, and powder coatings. 收起 | |
| Boltorn™ U3000 | Perstorp | Boltorn™ U3000 is an air-drying, yellow liquid dendritic polymer with a high concentration of unsaturation. The branched structure of Boltorn™ U3000 provides unique flow properties, which allows woodstains and alkyd paints for outdoor applications to comp...展开 Boltorn™ U3000 is an air-drying, yellow liquid dendritic polymer with a high concentration of unsaturation. The branched structure of Boltorn™ U3000 provides unique flow properties, which allows woodstains and alkyd paints for outdoor applications to comply with recent VOC demands while still securing rapid drying and durability. 收起 | |
| Curalite™ Ox | Perstorp | Curalite™ Ox is a low viscosity, odor free, non-skin irritating, colorless liquid. Curalite™ Ox is one of the main components of UV/EB cationic formulations as a reactive diluent. It combines increased reactivity with good diluting power of epoxy resins a...展开 Curalite™ Ox is a low viscosity, odor free, non-skin irritating, colorless liquid. Curalite™ Ox is one of the main components of UV/EB cationic formulations as a reactive diluent. It combines increased reactivity with good diluting power of epoxy resins and increases through cure and chemical resistance of the formulation. Curalite™ Ox is suitable for all types of cationic UV printing inks and overprint varnishes both for metal and plastic substrates. 收起 | |
| Curalite™ OxPlus | Perstorp | Curalite™ OxPlus is a clear colourless liquid. It is used as a reactive diluent for cationic radiation curing. | |
| D.M.P. 30 | Synpol Products PVT. Ltd | D.M.P. 30 is a tertiary amine. This product has a viscosity of 2-5 cPs and a density of 0.9-1.0 g/cm3. D.M.P. 30 is most commonly used as a hardener in lamination and adhesive applications. | |
| Epoxy Phenol B.G.E. | Synpol Products PVT. Ltd | Epoxy Phenol B.G.E. is a reactive diluent. This product has a density of 0.92-0.94 g/cm3. Epoxy Phenol B.G.E. is most commonly used in casting, encapsulation, and bonding applications. | |
| Epoxy Phenol CNSL | Synpol Products PVT. Ltd | Epoxy Phenol CNSL is a reactive diluent. This product has a density of 0.96-0.97 g/cm3. Epoxy Phenol CNSL is most commonly used in casting, encapsulation, and bonding applications. | |
| Epoxy Phenol P.G.E. | Synpol Products PVT. Ltd | Epoxy Phenol P.G.E. is a reactive diluent. This product has a density of 1.11-1.22 g/cm3. Epoxy Phenol P.G.E. is most commonly used in casting, encapsulation, and bonding applications. | |
| Glycerine Tech | Perstorp | Glycerine Tech is a yellow liquid based on rapeseed oil. This product was developed for markets that require low ash and low water content. It is used in alkd resins and industrial coating applications. | |
| Hardeners 111 | Synpol Products PVT. Ltd | Hardeners 111 is an aliphatic polyamine. This product has a viscosity of 15-25 cPs and a density of 0.98-0.99 g/cm3. Hardeners 111 is most commonly used in adhesive and coal tar modified surface coating applications. | |
| Hardeners 222 | Synpol Products PVT. Ltd | Hardeners 222 is an aliphatic polyamine. This product has a viscosity of 7-10 cPs and a density of 0.95-0.96 g/cm3. Hardeners 222 is most commonly used in adhesive and coal tar modified surface coating applications. | |
| Hardeners 260 | Synpol Products PVT. Ltd | Hardeners 260 is a modified aliphatic polyamine. This product has a viscosity of 75-80 cPs and a density of 1.0-1.1 g/cm3. Hardeners 260 is most commonly used in solvent-free epoxy coating and lamination applications. | |
| Hardeners 280 | Synpol Products PVT. Ltd | Hardeners 280 is a modified aliphatic polyamine. This product has a viscosity of 20-30 cPs and a density of 1.14-1.16 g/cm3. Hardeners 280 is most commonly used as a hardener in coating applications. | |
| Hardeners 340 | Synpol Products PVT. Ltd | Hardeners 340 is a modified aromatic polyamine. This product has a viscosity of 150-210 cPs and a density of 1.13-1.14 g/cm3. Hardeners 340 is most commonly used as a hardener in concrete and underwater coating applications. | |
| Hardeners 345 | Synpol Products PVT. Ltd | Hardeners 345 is a modified aliphatic polyamine. This product has a viscosity of 6-9 cPs and a density of 1.10-1.12 g/cm3. Hardeners 345 is most commonly used as a hardener in concrete and underwater coating applications. | |
| Hardeners 350 | Synpol Products PVT. Ltd | Hardeners 350 is a modified aliphatic polyamine. This product has a viscosity of 150-210 cPs and a density of 1.13-1.14 g/cm3. Hardeners 350 is most commonly used as a hardener in concrete and underwater coating applications. | |
| Hardeners 444 | Synpol Products PVT. Ltd | Hardeners 444 is an aliphatic amine epoxy adduct. This product has a viscosity of 2-4 cPs and a density of 0.95-0.96 g/cm3. Hardeners 444 is most commonly used in chemical and solvent-resistant coating applications. | |
| Hardeners 473 | Synpol Products PVT. Ltd | Hardeners 473 is a polyamine epoxy adduct. This product has a viscosity of 30-60 cPs and a density of 1.07-1.09 g/cm3. Hardeners 473 is most commonly used as a hardener in solvent-free epoxy coating applications. | |
| Hardeners 473 | Synpol Products PVT. Ltd | Hardeners 473 is an aliphatic amine adduct. This product has a viscosity of 100-140 cPs and a density of 1.10-1.12 g/cm3. Hardeners 473 is most commonly used in fast-setting adhesive applications. | |
| Hardeners 620 | Synpol Products PVT. Ltd | Hardeners 620 is a cycloaliphatic amine epoxy adduct. This product has a viscosity of 3-5 cPs and a density of 1.02-1.03 g/cm3. Hardeners 620 is most commonly used in flooring adhesive applications. | |
| Hardeners 640 | Synpol Products PVT. Ltd | Hardeners 640 is a phenyl alkamine. This product has a viscosity of 20-40 cPs and a density of 0.98-1.0 g/cm3. Hardeners 640 is most commonly used in solvent-free and high-solids epoxy coating applications. | |
| KLX 7997 | Nokxeller Quimica Ltda | KLX 7997 is a versatile polyether based aromatic isocyanate anionic dispersion for high tack formulations. It has a very soft and flexible film that can be used as a high initial and final bond strength and heat resistance. Typical applications are for mo...展开 KLX 7997 is a versatile polyether based aromatic isocyanate anionic dispersion for high tack formulations. It has a very soft and flexible film that can be used as a high initial and final bond strength and heat resistance. Typical applications are for modifying pressure sensitive textile & construction adhesives, neoprene, EVA and other plastic & leather primer applications. Once crosslinked shows outstanding water resistance. 收起 | |
| Methanol | Perstorp | Methanol is a volatile, clear fluid with a faint odor. Methanol is used as solvent and diluent and as raw material in the synthesis of formaldehyde and methyl acetate in industrial coating applications. | |
| NKX 144 | Nokxeller Quimica Ltda | NKX 144 is a small particle size high gloss PU polyesther aliphatic topcoat. It forms a transparent film of medium hardness suitable as a final varnish or topcoat where high gloss, abrasion resistance and clarity are required. When crosslinked, presents e...展开 NKX 144 is a small particle size high gloss PU polyesther aliphatic topcoat. It forms a transparent film of medium hardness suitable as a final varnish or topcoat where high gloss, abrasion resistance and clarity are required. When crosslinked, presents excellent weatherability. It is ideal for use as a topcoat for leather finish and PVC, indoor paints formulation, etc. 收起 | |
| NKX 176 | Nokxeller Quimica Ltda | NKX 176 is a soft and elastic PUD with outstanding film-forming properties. NKX 176 is a NON IONIC VOC free soft non tacky and elastic PUD with outstanding film-forming properties. It can be used as a universal coating resin for textile due to its varied ...展开 NKX 176 is a soft and elastic PUD with outstanding film-forming properties. NKX 176 is a NON IONIC VOC free soft non tacky and elastic PUD with outstanding film-forming properties. It can be used as a universal coating resin for textile due to its varied possibility of uses. NKX 176 has a flexible and soft but non-tacky handle. It has varied applications especially in textile finishes where body handle, durability are required. It is ideal for use as a print binder and as an universal coating resin in textile applications, garment leather finish, and coatings for digital printing in fabrics. 收起 | |
| NKX 183 | Nokxeller Quimica Ltda | NKX 180 based resin, with higher concentration.Multipurpose resin of extreme adhesion, outstanding toughness and abrasion resistance suitable for coatings for the following substrates: plastic, synthetic fabric, metal, shoe finish, etc. Due to its high cr...展开 NKX 180 based resin, with higher concentration.Multipurpose resin of extreme adhesion, outstanding toughness and abrasion resistance suitable for coatings for the following substrates: plastic, synthetic fabric, metal, shoe finish, etc. Due to its high crystalline segment concentration the polymer presents itself tough, yet flexible and resistant. 收起 | |
| NKX 201 NMP-Free | Nokxeller Quimica Ltda | NKX 201 NMP-Free shows excellent chemical, weathering and abrasion resistance due to higher resistance of this kind of polyol. NKX 201 presents wide use possibilities considering its high gloss and transparency properties as in synthetic substrates, as hi...展开 NKX 201 NMP-Free shows excellent chemical, weathering and abrasion resistance due to higher resistance of this kind of polyol. NKX 201 presents wide use possibilities considering its high gloss and transparency properties as in synthetic substrates, as high gloss topcoats in leather finish, wood flooring or print screen putties, metallic applications. 收起 | |
| NKX 240 | Nokxeller Quimica Ltda | NKX 240 is a multipurpose resin of exceptional properties was developed to serve a wide range of applications for flexible and rigid substrates. NKX 240 shows up a clear film with good gloss retention and presents high adhesion and heat resistance. | |
| NKX 245 | Nokxeller Quimica Ltda | NKX-245 is a modified polyester type suitable for glossy aqueous coatings as wood flooring. NKX 245 has a very hard film providing high abrasion resistance, and adhesion and can be easily formulated along with other components such as acrylic resins, pigm...展开 NKX-245 is a modified polyester type suitable for glossy aqueous coatings as wood flooring. NKX 245 has a very hard film providing high abrasion resistance, and adhesion and can be easily formulated along with other components such as acrylic resins, pigment dispersions, fillers, thickeners, etc. 收起 | |
| NKX 250 | Nokxeller Quimica Ltda | NKX-250 is a very hard PUD polyester type adequate for clear or pigmented waterbased topcoat for rigid substrates specially furniture, metal or hard synthetic substrates. Its hard, transparent and glossy film provides good abrasion resistance, adhesion an...展开 NKX-250 is a very hard PUD polyester type adequate for clear or pigmented waterbased topcoat for rigid substrates specially furniture, metal or hard synthetic substrates. Its hard, transparent and glossy film provides good abrasion resistance, adhesion and gloss. 收起 | |
| NKX 274 | Nokxeller Quimica Ltda | NKX 274 is a high solid small particle size resin with excellent chemical resistance. It is adequate for varied market segments wherever is necessary to replace a solventborne for a waterborne paint. Typical uses in metal, soles, PVC, other synthetic subs...展开 NKX 274 is a high solid small particle size resin with excellent chemical resistance. It is adequate for varied market segments wherever is necessary to replace a solventborne for a waterborne paint. Typical uses in metal, soles, PVC, other synthetic substrate paint compositions wherever high gloss, good adhesions and chemical resistance are necessary. 收起 | |
| NKX 279 | Nokxeller Quimica Ltda | NKX 279 is a fine particle size resin and developed to formulate water topcoats of high adhesion and very good chemical resistance. Typical end use applications include top coatings for rigid and flexible substrates including wood, paper, metallic surface...展开 NKX 279 is a fine particle size resin and developed to formulate water topcoats of high adhesion and very good chemical resistance. Typical end use applications include top coatings for rigid and flexible substrates including wood, paper, metallic surface , plastics and especially PVC and other synthetic laminates.NKX 279 is high performance water based coating and can replace traditional solvent based coatings in wide applications possibilities. 收起 | |
| Penta EXCETEQ™ | Perstorp | Penta EXCETEQ™ is pentaerythritol with high di-penta content. | |
| Pentaerythritol mono | Perstorp | Pentaerythritol mono (Penta) is a white crystalline polyhydric alcohol containing four primary hydroxyl groups. Applications are building block in Alkyd resins, radiation curing monomers, polyurethanes, rosin esters and synthetic lubricants. | |
| Phthalic Anhydride Flakes | Perstorp | Phthalic Anhydride Flakes are an intermediate used in the production of unsaturated polyester resins and alkyd resins used in the coatings industry. | |
| Polyol 4290 | Perstorp | Polyol 4290 is a tetrafunctional liquid polyol, used as a chemical building block and as crosslinker in polyurethanes. Polyol 4290 is also used as a precursor for free radical radiation curing monomers and oligomers . | |
| Polyol 4360 | Perstorp | Polyol 4360 is a tetrafunctional liquid polyol, used as a chemical building block and as crosslinker in polyurethanes. Polyol 4360 is also used as a precursor for free radical radiation curing monomers and oligomers . | |
| Polyol 4525 | Perstorp | Polyol 4525 is a tetrafunctional liquid polyol, used as a chemical building block and as crosslinker in polyurethanes. Polyol 4525 is also used as a precursor for free radical radiation curing monomers and oligomers . | |
| Polyol 4640 | Perstorp | Polyol 4640 is a tetrafunctional liquid polyol, used as a chemical building block and as crosslinker in polyurethanes. Polyol 4640 is also used as a precursor for free radical radiation curing monomers and oligomers. | |
| Polyol R2490 | Perstorp | Polyol R2490 is a difunctional liquid polyol, used as a precursor for free radical radiation curing monomers and oligomers. Polyol R2490 is also used as a chemical building block and as crosslinker in polyurethanes. | |
| Polyol R3430 | Perstorp | Polyol R3430 is a trifunctional liquid polyol, used as a precursor for free radical radiation curing monomers and oligomers. | |
| Polyol R3530 | Perstorp | Polyol R3530 is a trifunctional liquid polyol with secondary OH-groups, used as a precursor for free radical radiation curing monomers and oligomers. | |
| Polyol R3540 | Perstorp | Polyol R3540 is a trifunctional liquid polyol, used as a precursor for free radical radiation curing monomers and oligomers. | |
| Polyol R3600 | Perstorp | Polyol R3600 is a trifunctional liquid polyol, used as a precursor for free radical radiation curing monomers and oligomers. | |
| Polyol R4630 | Perstorp | Polyol R4630 is a tetrafunctional liquid polyol, used as a precursor for free radical radiation curing monomers and oligomers. | |
| Polyol R4631 | Perstorp | Polyol R4631 is a tetrafunctional liquid polyol, used as a precursor for free radical radiation curing monomers and oligomers. | |
| Polyol R6405 | Perstorp | Polyol R6405 is a hexafunctional liquid polyol, used as a precursor for free radical radiation curing monomers and oligomers. | |
| PVP-K12 | Shanghai WellTone Material Technology Co., Ltd. | PVP-K12 is a homopolymer of vinylpyrrolidone in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 10-13 and a total solids content of 39-41%. PVP-K12 is most commonly used as a suspending, dispersing, and emuls...展开 PVP-K12 is a homopolymer of vinylpyrrolidone in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 10-13 and a total solids content of 39-41%. PVP-K12 is most commonly used as a suspending, dispersing, and emulsifying agent in paint, coating, adhesive, ink, and textile dyeing and printing applications. 收起 | |
| PVP-K120 | Shanghai WellTone Material Technology Co., Ltd. | PVP-K120 is a homopolymer of vinylpyrrolidone in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 110-125 and a total solids content of 14-16%. PVP-K120 is most commonly used as a suspending, dispersing, and e...展开 PVP-K120 is a homopolymer of vinylpyrrolidone in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 110-125 and a total solids content of 14-16%. PVP-K120 is most commonly used as a suspending, dispersing, and emulsifying agent in paint, coating, adhesive, ink, and textile dyeing and printing applications. 收起 | |
| PVP-K15 | Shanghai WellTone Material Technology Co., Ltd. | PVP-K15 is a homopolymer of vinylpyrrolidone in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 13-17 and a total solids content of 39-41%. PVP-K15 is most commonly used as a suspending, dispersing, and emuls...展开 PVP-K15 is a homopolymer of vinylpyrrolidone in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 13-17 and a total solids content of 39-41%. PVP-K15 is most commonly used as a suspending, dispersing, and emulsifying agent in paint, coating, adhesive, ink, and textile dyeing and printing applications. 收起 | |
| PVP-K15 | Shanghai WellTone Material Technology Co., Ltd. | PVP-K15 is a homopolymer of vinylpyrrolidone in a white to milky white-colored powder form. This product has a K value of 13-18 and a total solids content of greater than 95%. PVP-K15 is most commonly used as a suspending, dispersing, and emulsifying ag...展开 PVP-K15 is a homopolymer of vinylpyrrolidone in a white to milky white-colored powder form. This product has a K value of 13-18 and a total solids content of greater than 95%. PVP-K15 is most commonly used as a suspending, dispersing, and emulsifying agent in paint, coating, adhesive, ink, and textile dyeing and printing applications. 收起 | |
| PVP-K17 | Shanghai WellTone Material Technology Co., Ltd. | PVP-K17 is a homopolymer of vinylpyrrolidone in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 15-19 and a total solids content of 39-41%. PVP-K17 is most commonly used as a suspending, dispersing, and emuls...展开 PVP-K17 is a homopolymer of vinylpyrrolidone in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 15-19 and a total solids content of 39-41%. PVP-K17 is most commonly used as a suspending, dispersing, and emulsifying agent in paint, coating, adhesive, ink, and textile dyeing and printing applications. 收起 | |
| PVP-K17 | Shanghai WellTone Material Technology Co., Ltd. | PVP-K17 is a homopolymer of vinylpyrrolidone in a white to milky white-colored powder form. This product has a K value of 15-19 and a total solids content of greater than 95%. PVP-K17 is most commonly used as a suspending, dispersing, and emulsifying ag...展开 PVP-K17 is a homopolymer of vinylpyrrolidone in a white to milky white-colored powder form. This product has a K value of 15-19 and a total solids content of greater than 95%. PVP-K17 is most commonly used as a suspending, dispersing, and emulsifying agent in paint, coating, adhesive, ink, and textile dyeing and printing applications. 收起 | |
| PVP-K25 | Shanghai WellTone Material Technology Co., Ltd. | PVP-K25 is a homopolymer of vinylpyrrolidone in a white to milky white-colored powder form. This product has a K value of 22-28 and a total solids content of greater than 95%. PVP-K25 is most commonly used as a suspending, dispersing, and emulsifying ag...展开 PVP-K25 is a homopolymer of vinylpyrrolidone in a white to milky white-colored powder form. This product has a K value of 22-28 and a total solids content of greater than 95%. PVP-K25 is most commonly used as a suspending, dispersing, and emulsifying agent in paint, coating, adhesive, ink, and textile dyeing and printing applications. 收起 | |
| PVP-K30 | Shanghai WellTone Material Technology Co., Ltd. | PVP-K30 is a homopolymer of vinylpyrrolidone in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 27-33 and a total solids content of 29-31%. PVP-K30 is most commonly used as a suspending, dispersing, and emuls...展开 PVP-K30 is a homopolymer of vinylpyrrolidone in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 27-33 and a total solids content of 29-31%. PVP-K30 is most commonly used as a suspending, dispersing, and emulsifying agent in paint, coating, adhesive, ink, and textile dyeing and printing applications. 收起 | |
| PVP-K30 | Shanghai WellTone Material Technology Co., Ltd. | PVP-K30 is a homopolymer of vinylpyrrolidone in a white to milky white-colored powder form. This product has a K value of 27-33 and a total solids content of greater than 95%. PVP-K30 is most commonly used as a suspending, dispersing, and emulsifying ag...展开 PVP-K30 is a homopolymer of vinylpyrrolidone in a white to milky white-colored powder form. This product has a K value of 27-33 and a total solids content of greater than 95%. PVP-K30 is most commonly used as a suspending, dispersing, and emulsifying agent in paint, coating, adhesive, ink, and textile dyeing and printing applications. 收起 | |
| PVP-K60 | Shanghai WellTone Material Technology Co., Ltd. | PVP-K60 is a homopolymer of vinylpyrrolidone in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 52-62 and a total solids content of 38-42%. PVP-K60 is most commonly used as a suspending, dispersing, and emuls...展开 PVP-K60 is a homopolymer of vinylpyrrolidone in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 52-62 and a total solids content of 38-42%. PVP-K60 is most commonly used as a suspending, dispersing, and emulsifying agent in paint, coating, adhesive, ink, and textile dyeing and printing applications. 收起 | |
| PVP-K90 | Shanghai WellTone Material Technology Co., Ltd. | PVP-K90 is a homopolymer of vinylpyrrolidone in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 81-97 and a total solids content of 19-21%. PVP-K90 is most commonly used as a suspending, dispersing, and emuls...展开 PVP-K90 is a homopolymer of vinylpyrrolidone in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 81-97 and a total solids content of 19-21%. PVP-K90 is most commonly used as a suspending, dispersing, and emulsifying agent in paint, coating, adhesive, ink, and textile dyeing and printing applications. 收起 | |
| PVP-K90 | Shanghai WellTone Material Technology Co., Ltd. | PVP-K90 is a homopolymer of vinylpyrrolidone in a white to milky white-colored powder form. This product has a K value of 81-94 and a total solids content of greater than 95%. PVP-K90 is most commonly used as a suspending, dispersing, and emulsifying ag...展开 PVP-K90 is a homopolymer of vinylpyrrolidone in a white to milky white-colored powder form. This product has a K value of 81-94 and a total solids content of greater than 95%. PVP-K90 is most commonly used as a suspending, dispersing, and emulsifying agent in paint, coating, adhesive, ink, and textile dyeing and printing applications. 收起 | |
| PVP/VA28W | Shanghai WellTone Material Technology Co., Ltd. | PVP/VA28W is a copolymer of vinylpyrrolidone and vinylacetate in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 16-22 and a total solids content of 48-52%. PVP/VA28W is most commonly used as a binder and vis...展开 PVP/VA28W is a copolymer of vinylpyrrolidone and vinylacetate in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 16-22 and a total solids content of 48-52%. PVP/VA28W is most commonly used as a binder and viscosity-enhancing agent in paper adhesive, coating, and printing ink applications. 收起 | |
| PVP/VA37E | Shanghai WellTone Material Technology Co., Ltd. | PVP/VA37E is a copolymer of vinylpyrrolidone and vinylacetate in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 24-32 and a total solids content of 48-52%. PVP/VA37E is most commonly used as a binder and vis...展开 PVP/VA37E is a copolymer of vinylpyrrolidone and vinylacetate in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 24-32 and a total solids content of 48-52%. PVP/VA37E is most commonly used as a binder and viscosity-enhancing agent in paper adhesive, coating, and printing ink applications. 收起 | |
| PVP/VA55E | Shanghai WellTone Material Technology Co., Ltd. | PVP/VA55E is a copolymer of vinylpyrrolidone and vinylacetate in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 24-32, a moisture content of less than 0.5%, and a total solids content of 48-52%. PVP/VA55E is...展开 PVP/VA55E is a copolymer of vinylpyrrolidone and vinylacetate in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 24-32, a moisture content of less than 0.5%, and a total solids content of 48-52%. PVP/VA55E is most commonly used as a binder and viscosity-enhancing agent in paper adhesive, coating, and printing ink applications. 收起 | |
| PVP/VA55W | Shanghai WellTone Material Technology Co., Ltd. | PVP/VA55W is a copolymer of vinylpyrrolidone and vinylacetate in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 22-30 and a total solids content of 48-52%. PVP/VA55W is most commonly used as a binder and vis...展开 PVP/VA55W is a copolymer of vinylpyrrolidone and vinylacetate in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 22-30 and a total solids content of 48-52%. PVP/VA55W is most commonly used as a binder and viscosity-enhancing agent in paper adhesive, coating, and printing ink applications. 收起 | |
| PVP/VA73E | Shanghai WellTone Material Technology Co., Ltd. | PVP/VA73E is a copolymer of vinylpyrrolidone and vinylacetate in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 30-38 and a total solids content of 48-52%. PVP/VA73E is most commonly used as a binder and vis...展开 PVP/VA73E is a copolymer of vinylpyrrolidone and vinylacetate in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 30-38 and a total solids content of 48-52%. PVP/VA73E is most commonly used as a binder and viscosity-enhancing agent in paper adhesive, coating, and printing ink applications. 收起 | |
| PVP/VA73W | Shanghai WellTone Material Technology Co., Ltd. | PVP/VA73W is a copolymer of vinylpyrrolidone and vinylacetate in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 24-32 and a total solids content of 48-52%. PVP/VA73W is most commonly used as a binder and vis...展开 PVP/VA73W is a copolymer of vinylpyrrolidone and vinylacetate in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 24-32 and a total solids content of 48-52%. PVP/VA73W is most commonly used as a binder and viscosity-enhancing agent in paper adhesive, coating, and printing ink applications. 收起 | |
| PVP/VA84E | Shanghai WellTone Material Technology Co., Ltd. | PVP/VA84E is a copolymer of vinylpyrrolidone and vinylacetate in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 30-36, a moisture content of less than 0.5%, and a total solids content of 48-52%. PVP/VA84E is...展开 PVP/VA84E is a copolymer of vinylpyrrolidone and vinylacetate in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 30-36, a moisture content of less than 0.5%, and a total solids content of 48-52%. PVP/VA84E is most commonly used as a binder and viscosity-enhancing agent in paper adhesive, coating, and printing ink applications. 收起 | |
| PVP/VA84S | Shanghai WellTone Material Technology Co., Ltd. | PVP/VA84S is a copolymer of vinylpyrrolidone and vinylacetate in a white to milky white powder form. This product has a K value of 30-36 and a total solids content of greater than 95%. PVP/VA84S is most commonly used as a binder and viscosity-enhancing ...展开 PVP/VA84S is a copolymer of vinylpyrrolidone and vinylacetate in a white to milky white powder form. This product has a K value of 30-36 and a total solids content of greater than 95%. PVP/VA84S is most commonly used as a binder and viscosity-enhancing agent in paper adhesive, coating, and printing ink applications. 收起 | |
| PVP/VA84W | Shanghai WellTone Material Technology Co., Ltd. | PVP/VA84W is a copolymer of vinylpyrrolidone and vinylacetate in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 30-36 and a total solids content of 48-52%. PVP/VA84W is most commonly used as a binder and vis...展开 PVP/VA84W is a copolymer of vinylpyrrolidone and vinylacetate in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 30-36 and a total solids content of 48-52%. PVP/VA84W is most commonly used as a binder and viscosity-enhancing agent in paper adhesive, coating, and printing ink applications. 收起 | |
| Synpol 1001 | Synpol Products PVT. Ltd | Synpol 1001 is a butylated UF amino resin. This product has a non-volatile compound content of 63-67% and a density at 25°C of 1.03-1.05 g/cm3. Synpol 1001 is most commonly used in general purpose baking enamel applications. | |
| Synpol 105X | Synpol Products PVT. Ltd | Synpol 105X is a reactive polyamide resin. This product has a density at 25°C of 0.96-0.98 g/cm3 and a non-volatile compound content of 58-62%. Synpol 105X is most commonly used as a hardener in solvent-based epoxy coating applications. | |
| Synpol 115 | Synpol Products PVT. Ltd | Synpol 115 is a reactive polyamide resin. This product has a density at 25°C of 0.97-0.98 g/cm3. Synpol 115 is most commonly used as a hardener in protective and decorative coating applications. | |
| Synpol 115 (70% in Xylene) | Synpol Products PVT. Ltd | Synpol 115 (70% in Xylene) is a reactive polyamide resin. This product has a density at 25°C of 0.94-0.95 g/cm3 and a non-volatile compound content of 68-72%. Synpol 115 (70% in Xylene) is most commonly used as a hardener in protective and decorative coa...展开 Synpol 115 (70% in Xylene) is a reactive polyamide resin. This product has a density at 25°C of 0.94-0.95 g/cm3 and a non-volatile compound content of 68-72%. Synpol 115 (70% in Xylene) is most commonly used as a hardener in protective and decorative coating applications. 收起 | |
| Synpol 130 | Synpol Products PVT. Ltd | Synpol 130 is a reactive polyamide resin. This product has a density at 25°C of 1.03-1.04 g/cm3 and a non-volatile compound content of 68-72%. Synpol 130 is most commonly used as a hardener in water-emulsifiable epoxy coating applications. | |
| Synpol 140 | Synpol Products PVT. Ltd | Synpol 140 is a reactive polyamide resin. This product has a density at 25°C of 0.96-0.98 g/cm3. Synpol 140 is most commonly used as a hardener in solvent-free coating, adhesive, and lamination applications. | |
| Synpol 150 | Synpol Products PVT. Ltd | Synpol 150 is a reactive polyamide resin. This product has a density at 25°C of 0.975-0.985 g/cm3. Synpol 150 is most commonly used as a hardener in solvent-free coating, adhesive, and lamination applications. | |
| Synpol 160 | Synpol Products PVT. Ltd | Synpol 160 is a reactive polyamide resin. This product has a density at 25°C of 0.94-0.96 g/cm3. Synpol 160 is most commonly used as a hardener in solvent-free coating, adhesive, and lamination applications. | |
| Synpol 160 LP | Synpol Products PVT. Ltd | Synpol 160 LP is a reactive polyamide resin. This product has a density at 25°C of 0.92-0.94 g/cm3. Synpol 160 LP is most commonly used as a hardener in solvent-free coating applications. | |
| Synpol 200 | Synpol Products PVT. Ltd | Synpol 200 is a bisphenol A-based, unmodified epoxy resin. This product has a viscosity at 25°C of 120-160 Poises. Synpol 200 is most commonly used in coating, lamination, and adhesive applications. | |
| Synpol 2080 | Synpol Products PVT. Ltd | Synpol 2080 is a coconut fatty acid-modified epoxy ester. This product has a density of 0.97-0.98 g/cm3. Synpol 2080 is most commonly used in clear and pigmented electronic and appliance finish applications. | |
| Synpol 210 | Synpol Products PVT. Ltd | Synpol 210 is a bisphenol A-based, unmodified reactive diluent. This product has a viscosity at 25°C of 180-210 Poises. Synpol 210 is most commonly used in coating, lamination, and adhesive applications. | |
| Synpol 220 | Synpol Products PVT. Ltd | Synpol 220 is a bisphenol A-based, unmodified reactive diluent. This product has a viscosity at 25°C of 180-200 Poises. Synpol 220 is most commonly used in coating, lamination, and adhesive applications. | |
| Synpol 280 | Synpol Products PVT. Ltd | Synpol 280 is a bisphenol A-based, unmodified epoxy resin. This product has a density of 1.18-1.19 g/cm3. Synpol 280 is most commonly used in high-solids coating, adhesive, and lamination applications. | |
| Synpol 450XX | Synpol Products PVT. Ltd | Synpol 450XX is a bisphenol A-based, unmodified epoxy resin. This product has a density of 1.07-1.09 g/cm3. Synpol 450XX is most commonly used in chemical-resistant, air-dry, and bake coating applications. | |
| Synpol 5545 | Synpol Products PVT. Ltd | Synpol 5545 is a linseed fatty acid-modified epoxy ester. This product has a density of 0.92-0.93 g/cm3. Synpol 5545 is most commonly used in air-drying maintenance finish applications. | |
| Synpol 6040 | Synpol Products PVT. Ltd | Synpol 6040 is a soya fatty acid-modified epoxy ester. This product has a density of 0.96-0.97 g/cm3. Synpol 6040 is most commonly used in clear and pigmented electronic and appliance finish applications. | |
| Synpol 900 | Synpol Products PVT. Ltd | Synpol 900 is a bisphenol A-based, unmodified epoxy resin. This product has a density of 1.18-1.19 g/cm3 and a melting point 95-105ºC. Synpol 900 is most commonly used in air-dry and bake finish, as well as powder coating applications. | |
| Synpol AT-67 | Synpol Products PVT. Ltd | Synpol AT-67 is an acrylic copolymer solution. This product has a density of 1.02-1.03 g/cm3 and a total non-volatile content of 56-60%. Synpol AT-67 is most commonly used in high-performance coating applications. | |
| Synpol AT-68 | Synpol Products PVT. Ltd | Synpol AT-68 is an acrylic copolymer solution. This product has a density of 1.01-1.03 g/cm3 and a total non-volatile content of 58-62%. Synpol AT-68 is most commonly used in flexible paint applications. | |
| Synpol AT-70 | Synpol Products PVT. Ltd | Synpol AT-70 is an acrylic copolymer solution. This product has a density of 0.98-0.99 g/cm3 and a total non-volatile content of 58-62%. Synpol AT-70 is most commonly used in metal finish applications. | |
| Synpol B-10 | Synpol Products PVT. Ltd | Synpol B-10 is a thermoplastic homopolymer acrylic resin solution. This product has a density of 0.98-0.99 g/cm3 and a total non-volatile content of 38-42%. Synpol B-10 is most commonly used in screen printing, vinyl coating, plastic coating, gravure pr...展开 Synpol B-10 is a thermoplastic homopolymer acrylic resin solution. This product has a density of 0.98-0.99 g/cm3 and a total non-volatile content of 38-42%. Synpol B-10 is most commonly used in screen printing, vinyl coating, plastic coating, gravure printing ink, and PVC coating primer applications. 收起 | |
| Synpol B-30 | Synpol Products PVT. Ltd | Synpol B-30 is a polyvinyl butyral resin in a clear water white-colored, free flowing, granular form. This product has a density at 25°C of 1.05-1.15 g/cm3. Synpol B-30 is most commonly used in metal, textile, paper and foil coating, thermosetting and h...展开 Synpol B-30 is a polyvinyl butyral resin in a clear water white-colored, free flowing, granular form. This product has a density at 25°C of 1.05-1.15 g/cm3. Synpol B-30 is most commonly used in metal, textile, paper and foil coating, thermosetting and hot-melt adhesive, wood finish, and printing ink applications. 收起 | |
| Synpol B-60 | Synpol Products PVT. Ltd | Synpol B-60 is a polyvinyl butyral resin in a clear water white-colored, free flowing, granular form. This product has a density at 25°C of 1.05-1.15 g/cm3 and a softening point of 51-55°C. Synpol B-60 is most commonly used in metal, textile, paper and ...展开 Synpol B-60 is a polyvinyl butyral resin in a clear water white-colored, free flowing, granular form. This product has a density at 25°C of 1.05-1.15 g/cm3 and a softening point of 51-55°C. Synpol B-60 is most commonly used in metal, textile, paper and foil coating, thermosetting and hot-melt adhesive, wood finish, and printing ink applications. 收起 | |
| Synpol B-722 | Synpol Products PVT. Ltd | Synpol B-722 is a thermoplastic homopolymer acrylic resin solution. This product has a density of 0.99-1.00 g/cm3 and a total non-volatile content of 48-52%. Synpol B-722 is most commonly used in acrylic lacquer, wood lacquer, ink, and PVC coating appli...展开 Synpol B-722 is a thermoplastic homopolymer acrylic resin solution. This product has a density of 0.99-1.00 g/cm3 and a total non-volatile content of 48-52%. Synpol B-722 is most commonly used in acrylic lacquer, wood lacquer, ink, and PVC coating applications. 收起 | |
| Synpol B-723 | Synpol Products PVT. Ltd | Synpol B-723 is a thermoplastic homopolymer acrylic resin solution. This product has a density of 0.95-0.96 g/cm3 and a total non-volatile content of 38-42%. Synpol B-723 is most commonly used in metal, vinyl, and plastic coating, as well as aluminium l...展开 Synpol B-723 is a thermoplastic homopolymer acrylic resin solution. This product has a density of 0.95-0.96 g/cm3 and a total non-volatile content of 38-42%. Synpol B-723 is most commonly used in metal, vinyl, and plastic coating, as well as aluminium lacquer applications. 收起 | |
| Synpol BG-40 | Synpol Products PVT. Ltd | Synpol BG-40 is a butylated UF amino resin. This product has a non-volatile compound content of 72-76% and a density at 25°C of 1.01-1.03 g/cm3. Synpol BG-40 is most commonly used in high-gloss stoving enamel applications. | |
| Synpol L-9 | Synpol Products PVT. Ltd | Synpol L-9 is a butylated phenolic formaledyde resin. This product has a density of 0.98-0.99 g/cm3 and a total non-volatile content of 58-62%. Synpol L-9 is most commonly used in etch primer, adhesive, insulating varnish, and wire enamel applications. | |
| Synpol L-97 | Synpol Products PVT. Ltd | Synpol L-97 is a butylated phenolic formaldehyde resin. This product has a density of 0.98-0.99 g/cm3 and a total non-volatile content of 58-62%. Synpol L-97 is most commonly used in etch primer, adhesive, insulating varnish, and wire enamel applications. | |
| Synpol M-70 | Synpol Products PVT. Ltd | Synpol M-70 is a butylated MF amino resin. This product has a non-volatile compound content of 68-72% and a density at 25°C of 1.01-1.03 g/cm3. Synpol M-70 is most commonly used in flexible lacquer applications. | |
| Synpol MF-268 | Synpol Products PVT. Ltd | Synpol MF-268 is a butylated MF amino resin. This product has a non-volatile compound content of 58-62% and a density at 25°C of 1.01-1.03 g/cm3. Synpol MF-268 is most commonly used in stoving enamel applications. |
