| D.M.P. 30 | Synpol Products PVT. Ltd | D.M.P. 30 is a tertiary amine. This product has a viscosity of 2-5 cPs and a density of 0.9-1.0 g/cm3. D.M.P. 30 is most commonly used as a hardener in lamination and adhesive applications. | |
| Epoxy Phenol B.G.E. | Synpol Products PVT. Ltd | Epoxy Phenol B.G.E. is a reactive diluent. This product has a density of 0.92-0.94 g/cm3. Epoxy Phenol B.G.E. is most commonly used in casting, encapsulation, and bonding applications. | |
| Epoxy Phenol CNSL | Synpol Products PVT. Ltd | Epoxy Phenol CNSL is a reactive diluent. This product has a density of 0.96-0.97 g/cm3. Epoxy Phenol CNSL is most commonly used in casting, encapsulation, and bonding applications. | |
| Epoxy Phenol P.G.E. | Synpol Products PVT. Ltd | Epoxy Phenol P.G.E. is a reactive diluent. This product has a density of 1.11-1.22 g/cm3. Epoxy Phenol P.G.E. is most commonly used in casting, encapsulation, and bonding applications. | |
| EXOCOAT™ 161 | Axcentive Sarl | EXOCOAT® 161 by Axcentive is a multipurpose, high-performance coating resin. It is preceramic, as it cures the ceramic layer. Upon curing, it converts to an inorganic highly cross linked layer with excellent barrier properties, high durability, and extre...展开 EXOCOAT® 161 by Axcentive is a multipurpose, high-performance coating resin. It is preceramic, as it cures the ceramic layer. Upon curing, it converts to an inorganic highly cross linked layer with excellent barrier properties, high durability, and extreme hardness (9H). Offers chemical-, scratch-, oxidation resistance, and temperature resistance over 1000°C for prolonged time. It can function as stand-alone resin at a layer thickness of 0.5 to 2 µm to form a durable finish that can be easy to clean. It bonds to substrates such as steel, aluminum, glass, and old coating layers. It can be used as conversion coating replacing Cr(VI). It may be co-formulated with the most frequently used coating ingredients from the group of pigments, fillers, resins, additives, and (co-)solvents and creates colored, super hard, or matte surfaces. EXOCOAT® 161 is highly advised to be used in aprotic solvents. It has a shelf life of 6 months. 收起 | |
| Hardeners 111 | Synpol Products PVT. Ltd | Hardeners 111 is an aliphatic polyamine. This product has a viscosity of 15-25 cPs and a density of 0.98-0.99 g/cm3. Hardeners 111 is most commonly used in adhesive and coal tar modified surface coating applications. | |
| Hardeners 222 | Synpol Products PVT. Ltd | Hardeners 222 is an aliphatic polyamine. This product has a viscosity of 7-10 cPs and a density of 0.95-0.96 g/cm3. Hardeners 222 is most commonly used in adhesive and coal tar modified surface coating applications. | |
| Hardeners 260 | Synpol Products PVT. Ltd | Hardeners 260 is a modified aliphatic polyamine. This product has a viscosity of 75-80 cPs and a density of 1.0-1.1 g/cm3. Hardeners 260 is most commonly used in solvent-free epoxy coating and lamination applications. | |
| Hardeners 280 | Synpol Products PVT. Ltd | Hardeners 280 is a modified aliphatic polyamine. This product has a viscosity of 20-30 cPs and a density of 1.14-1.16 g/cm3. Hardeners 280 is most commonly used as a hardener in coating applications. | |
| Hardeners 340 | Synpol Products PVT. Ltd | Hardeners 340 is a modified aromatic polyamine. This product has a viscosity of 150-210 cPs and a density of 1.13-1.14 g/cm3. Hardeners 340 is most commonly used as a hardener in concrete and underwater coating applications. | |
| Hardeners 345 | Synpol Products PVT. Ltd | Hardeners 345 is a modified aliphatic polyamine. This product has a viscosity of 6-9 cPs and a density of 1.10-1.12 g/cm3. Hardeners 345 is most commonly used as a hardener in concrete and underwater coating applications. | |
| Hardeners 350 | Synpol Products PVT. Ltd | Hardeners 350 is a modified aliphatic polyamine. This product has a viscosity of 150-210 cPs and a density of 1.13-1.14 g/cm3. Hardeners 350 is most commonly used as a hardener in concrete and underwater coating applications. | |
| Hardeners 444 | Synpol Products PVT. Ltd | Hardeners 444 is an aliphatic amine epoxy adduct. This product has a viscosity of 2-4 cPs and a density of 0.95-0.96 g/cm3. Hardeners 444 is most commonly used in chemical and solvent-resistant coating applications. | |
| Hardeners 473 | Synpol Products PVT. Ltd | Hardeners 473 is a polyamine epoxy adduct. This product has a viscosity of 30-60 cPs and a density of 1.07-1.09 g/cm3. Hardeners 473 is most commonly used as a hardener in solvent-free epoxy coating applications. | |
| Hardeners 473 | Synpol Products PVT. Ltd | Hardeners 473 is an aliphatic amine adduct. This product has a viscosity of 100-140 cPs and a density of 1.10-1.12 g/cm3. Hardeners 473 is most commonly used in fast-setting adhesive applications. | |
| Hardeners 620 | Synpol Products PVT. Ltd | Hardeners 620 is a cycloaliphatic amine epoxy adduct. This product has a viscosity of 3-5 cPs and a density of 1.02-1.03 g/cm3. Hardeners 620 is most commonly used in flooring adhesive applications. | |
| Hardeners 640 | Synpol Products PVT. Ltd | Hardeners 640 is a phenyl alkamine. This product has a viscosity of 20-40 cPs and a density of 0.98-1.0 g/cm3. Hardeners 640 is most commonly used in solvent-free and high-solids epoxy coating applications. | |
| SiSiB® PC5130 | SiSiB SILICONES | SiSiB® PC5130 is a colorless clear liquid. It is formed by a reaction of metallic silicon or ferrosilicon with hydrogen chloride or chlorine. It can be used in the production of silane crosslinkers, silane coupling agents, and siloxanes; as a hydrophobi...展开 SiSiB® PC5130 is a colorless clear liquid. It is formed by a reaction of metallic silicon or ferrosilicon with hydrogen chloride or chlorine. It can be used in the production of silane crosslinkers, silane coupling agents, and siloxanes; as a hydrophobic treatment; or for pyrolysis to form Si-C coatings. 收起 | |
| SiSiB® PC5210 | SiSiB SILICONES | SiSiB® PC5210 is a colorless clear liquid. It is a group of reactive, chlorine-containing silicon compounds, used in many chemical processes. It reacts with water to produce hydrogen chloride. It can be used as coatings for silicon and glass surfaces or...展开 SiSiB® PC5210 is a colorless clear liquid. It is a group of reactive, chlorine-containing silicon compounds, used in many chemical processes. It reacts with water to produce hydrogen chloride. It can be used as coatings for silicon and glass surfaces or in the production of silicone (polysiloxane) polymers. 收起 | |
| SiSiB® PC5310 | SiSiB SILICONES | SiSiB® PC5310 is a clear, colourless, caustic and highly flammable liquid with a pungent odour. It is formed by a reaction of metallic silicon or ferrosilicon with hydrogen chloride or chlorine. It can be used as coatings for silicon and glass surfaces,...展开 SiSiB® PC5310 is a clear, colourless, caustic and highly flammable liquid with a pungent odour. It is formed by a reaction of metallic silicon or ferrosilicon with hydrogen chloride or chlorine. It can be used as coatings for silicon and glass surfaces, or in the production of silicone (polysiloxane) polymers. 收起 | |
| SiSiB® PC5410 | SiSiB SILICONES | SiSiB® PC5410 is a colorless or light yellowish, low-viscosity liquid with a SiO2 content of 39.5%. It is the methyl ester of orthosilicic acid. It can be used as an inorganic binder for refractory fillers and pigments, like precision investing castings...展开 SiSiB® PC5410 is a colorless or light yellowish, low-viscosity liquid with a SiO2 content of 39.5%. It is the methyl ester of orthosilicic acid. It can be used as an inorganic binder for refractory fillers and pigments, like precision investing castings; as a second backup casting coating; as a binder in zinc-rich (corrosion resistant) coating; a starting material for sol-gel process; as a crosslinking agent for silicone sealant; as a drying agent in sealing compositions; or as a chemical intermediate. 收起 | |
| SiSiB® PC5411 | SiSiB SILICONES | SiSiB® PC5411, also called Methyl silicate 51, is a colorless transparent liquid, containing 51% silica (SiO2) by mass. It is a hydrolyzed and oligomerized form of methyl silicate. It can be used as an inorganic binder for refractory fillers and pigments...展开 SiSiB® PC5411, also called Methyl silicate 51, is a colorless transparent liquid, containing 51% silica (SiO2) by mass. It is a hydrolyzed and oligomerized form of methyl silicate. It can be used as an inorganic binder for refractory fillers and pigments, like precision investment castings; as a second backup casting coating; as a binder in zinc-rich (corrosion resistant) coating; as a starting material for sol-gel process; as a crosslinking agent for silicone sealant; as a drying agent in sealing compositions; or as a chemical intermediate. 收起 | |
| SiSiB® PC5430 | SiSiB SILICONES | SiSiB® PC5430, also called n-Propyl Silicate, is a colorless transparent liquid. It is used as a cross-linking agent for silicon rubber, and as a modifying agent for organic and inorganic resins; as an inorganic binder for refractory fillers and pigments...展开 SiSiB® PC5430, also called n-Propyl Silicate, is a colorless transparent liquid. It is used as a cross-linking agent for silicon rubber, and as a modifying agent for organic and inorganic resins; as an inorganic binder for refractory fillers and pigments, like precision investment castings; as a second backup casting coating; as a binder in zinc-rich (corrosion resistant) coating; as a starting material for sol-gel process; as a crosslinking agent for silicone sealant; as a drying agent in sealing compositions; or as a chemical intermediate. 收起 | |
| SiSiB® PC5433 | SiSiB SILICONES | SiSiB® PC5433 is a colorless clear liquid. It is the isopropyl ester of orthosilicic acid. It may be used as an inorganic binder for refractory fillers and pigments, like precision investment castings; as a second backup casting coating; as a binder in z...展开 SiSiB® PC5433 is a colorless clear liquid. It is the isopropyl ester of orthosilicic acid. It may be used as an inorganic binder for refractory fillers and pigments, like precision investment castings; as a second backup casting coating; as a binder in zinc-rich (corrosion resistant) coating; as a starting material for sol-gel process; as a crosslinking agent for silicone sealant; as a drying agent in sealing compositions; or as a chemical intermediate. 收起 | |
| SiSiB® PC5440 | SiSiB SILICONES | SiSiB® PC5440 is a colorless transparent liquid. It may be used as an inorganic binder for refractory fillers and pigments, like precision investment castings; as a second backup casting coating; as a binder in zinc-rich (corrosion resistant) coating; a...展开 SiSiB® PC5440 is a colorless transparent liquid. It may be used as an inorganic binder for refractory fillers and pigments, like precision investment castings; as a second backup casting coating; as a binder in zinc-rich (corrosion resistant) coating; as a starting material for sol-gel process; as a crosslinking agent for silicone sealant; as a drying agent in sealing compositions; or as a chemical intermediate. 收起 | |
| SiSiB® PC5931 | SiSiB SILICONES | SiSiB® PC5931 is a colorless or yellowish clear, low viscosity liquid. It is an alkylalkoxysilane. It can be used in sol-gel production, as a hydrophobic surface treatment for inorganic powders or filler materials, or as a catalyst component for polyole...展开 SiSiB® PC5931 is a colorless or yellowish clear, low viscosity liquid. It is an alkylalkoxysilane. It can be used in sol-gel production, as a hydrophobic surface treatment for inorganic powders or filler materials, or as a catalyst component for polyolefin production with Zeigler-Natta catalysts. 收起 | |
| SiSiB® PC5932 | SiSiB SILICONES | SiSiB® PC5932 is a colorless or yellowish clear, low viscosity liquid. It is an alkylalkoxysilane. It can be used in sol-gel production, as a hydrophobic surface treatment for inorganic powders or filler materials, or as a catalyst component for polyole...展开 SiSiB® PC5932 is a colorless or yellowish clear, low viscosity liquid. It is an alkylalkoxysilane. It can be used in sol-gel production, as a hydrophobic surface treatment for inorganic powders or filler materials, or as a catalyst component for polyolefin production with Zeigler-Natta catalysts. 收起 | |
| SiSiB® PC5951 | SiSiB SILICONES | SiSiB® PC5951 is a colorless clear liquid. It is a high purity, undiluted iso-butyltriethoxysilane. It should be diluted with solvents such as alcohols, chlorinated solvents, aliphatic solvents, and low molecular weight cyclic polydimethylsiloxane bef...展开 SiSiB® PC5951 is a colorless clear liquid. It is a high purity, undiluted iso-butyltriethoxysilane. It should be diluted with solvents such as alcohols, chlorinated solvents, aliphatic solvents, and low molecular weight cyclic polydimethylsiloxane before use. It can also be used in the formulation of water repellent products, when diluted with an appropriate solvent; as a surface modifier to generate hydrophobicity and to increase compatibility to organic non-polar matrices; in the production of silane crosslinking formulations; or as a component in the manufacture of Ziegler-Natta Catalysts. 收起 | |
| SiSiB® PC5952 | SiSiB SILICONES | SiSiB® PC5952 is a colorless clear liquid. It is a high purity, undiluted iso-butyltriethoxysilane. It should be diluted with solvents such as alcohols, chlorinated solvents, aliphatic solvents, and low molecular weight cyclic polydimethylsiloxane before ...展开 SiSiB® PC5952 is a colorless clear liquid. It is a high purity, undiluted iso-butyltriethoxysilane. It should be diluted with solvents such as alcohols, chlorinated solvents, aliphatic solvents, and low molecular weight cyclic polydimethylsiloxane before use. It can also be used in the formulation of water repellent products, when diluted with an appropriate solvent; as a surface modifier to generate hydrophobicity and to increase compatibility to organic non-polar matrices; in the production of silane crosslinking formulations; or as a component in the manufacture of Ziegler-Natta Catalysts. 收起 | |
| SiSiB® PC6110 | SiSiB SILICONES | SiSiB® PC6110, vinyltrimethoxysilane, is a colorless transparent liquid. It is used as a polymer modifier via grafting reactions; for the preparation of moisture-curing polymers, e.g. polyethylene; as a co-monomer for the preparation of different polymer...展开 SiSiB® PC6110, vinyltrimethoxysilane, is a colorless transparent liquid. It is used as a polymer modifier via grafting reactions; for the preparation of moisture-curing polymers, e.g. polyethylene; as a co-monomer for the preparation of different polymers such as polyethylene or acrylics; as an efficient adhesion promoter for mineral-filled polymers, improving mechanical and electrical properties especially after exposure to moisture; to improve the compatibility of fillers with polymers, leading to a better dispersibility, reduced melt viscosity and easier processing of filled plastics; for the pretreatment of glass, metals, or ceramic surfaces in order to improve the adhesion of coatings on these surfaces and corrosion resistance; in sealants; or for cable isolation, and sheathing mainly in low voltage applications as well as for hot water/sanitary pipes and underfloor heating. 收起 | |
| SiSiB® PC6112 | SiSiB SILICONES | SiSiB® PC6112 (BTMSE) is a clear to straw liquid bis-silanes. It can be used to improve the adhesion of RTV silicone sealants to dry or wet surface, and improve its weather resistance; to formulate chromate-free, water-borne primers to protect metals fro...展开 SiSiB® PC6112 (BTMSE) is a clear to straw liquid bis-silanes. It can be used to improve the adhesion of RTV silicone sealants to dry or wet surface, and improve its weather resistance; to formulate chromate-free, water-borne primers to protect metals from corrosion; or to reduce underfilm corrosion and to improve the adhesion of the paint systems even compared to chromate layers. 收起 | |
| SiSiB® PC6122 | SiSiB SILICONES | SiSiB® PC6122 (BTSE) is a clear to straw liquid bis-silanes. As a bis-silyl functional silane, has six hydrolyzable groups and are believed to be more crosslinked than tri- and tetra-functional analogs. It can be used to improve the adhesion of RTV sili...展开 SiSiB® PC6122 (BTSE) is a clear to straw liquid bis-silanes. As a bis-silyl functional silane, has six hydrolyzable groups and are believed to be more crosslinked than tri- and tetra-functional analogs. It can be used to improve the adhesion of RTV silicone sealants to dry or wet surface, and improve its weather resistance; to formulate chromate-free, water-borne primers to protect metals from corrosion; or to reduce underfilm corrosion and to improve the adhesion of the paint systems even compared to chromate layers. 收起 | |
| SiSiB® PC6130 | SiSiB SILICONES | SiSiB® PC6130, or vinyltriethoxysilane, is a colorless transparent liquid. It is a vinyl-functional silane. It can be used to improve the bond between glass fiber or mineral fillers and resins that are reactive towards the vinyl group; to functionalize re...展开 SiSiB® PC6130, or vinyltriethoxysilane, is a colorless transparent liquid. It is a vinyl-functional silane. It can be used to improve the bond between glass fiber or mineral fillers and resins that are reactive towards the vinyl group; to functionalize resins via free radical mechanisms - copolymerization or grafting - and to modify surfaces; for the preparation of moisture-curing polymers, e.g. polyethylene; for cable isolation, and sheathing mainly in low voltage applications as well as for hot water/sanitary pipes and underfloor heating; as a co-monomer for the preparation of different polymers such as polyethylene or acrylics; as an efficient adhesion promoter for various mineral-filled polymers, improving mechanical and electrical properties especially after exposure to moisture; to improve the compatibility of fillers with polymers; in the pretreatment of glass, metals, or ceramic surfaces in order to improve the adhesion of coatings on these surfaces and corrosion resistance; or in sealants. 收起 | |
| SiSiB® PC7910 | SiSiB SILICONES | SiSiB® PC7910 is an almost colorless or yellowish transparent liquid. It hydrolyzes upon contact with moisture. It is used as a raw material for acetoxy crosslinking RTV-1 sealants. | |
| SiSiB® PC9150 | SiSiB SILICONES | SiSiB® PC9150 is a colorless transparent liquid. It is used in cosmetics, deodorant, water repelling windshield coating, food additives, and some soaps. | |
| SiSiB® PC9273 | SiSiB SILICONES | SiSiB® PC9273 is a colorless to yellowish clear liquid. It is a siloxane. It can be used in cosmetics, deodorant, water repelling windshield coatings, food additives, and some soaps. | |
| Synpol 1001 | Synpol Products PVT. Ltd | Synpol 1001 is a butylated UF amino resin. This product has a non-volatile compound content of 63-67% and a density at 25°C of 1.03-1.05 g/cm3. Synpol 1001 is most commonly used in general purpose baking enamel applications. | |
| Synpol 105X | Synpol Products PVT. Ltd | Synpol 105X is a reactive polyamide resin. This product has a density at 25°C of 0.96-0.98 g/cm3 and a non-volatile compound content of 58-62%. Synpol 105X is most commonly used as a hardener in solvent-based epoxy coating applications. | |
| Synpol 115 | Synpol Products PVT. Ltd | Synpol 115 is a reactive polyamide resin. This product has a density at 25°C of 0.97-0.98 g/cm3. Synpol 115 is most commonly used as a hardener in protective and decorative coating applications. | |
| Synpol 115 (70% in Xylene) | Synpol Products PVT. Ltd | Synpol 115 (70% in Xylene) is a reactive polyamide resin. This product has a density at 25°C of 0.94-0.95 g/cm3 and a non-volatile compound content of 68-72%. Synpol 115 (70% in Xylene) is most commonly used as a hardener in protective and decorative coa...展开 Synpol 115 (70% in Xylene) is a reactive polyamide resin. This product has a density at 25°C of 0.94-0.95 g/cm3 and a non-volatile compound content of 68-72%. Synpol 115 (70% in Xylene) is most commonly used as a hardener in protective and decorative coating applications. 收起 | |
| Synpol 130 | Synpol Products PVT. Ltd | Synpol 130 is a reactive polyamide resin. This product has a density at 25°C of 1.03-1.04 g/cm3 and a non-volatile compound content of 68-72%. Synpol 130 is most commonly used as a hardener in water-emulsifiable epoxy coating applications. | |
| Synpol 140 | Synpol Products PVT. Ltd | Synpol 140 is a reactive polyamide resin. This product has a density at 25°C of 0.96-0.98 g/cm3. Synpol 140 is most commonly used as a hardener in solvent-free coating, adhesive, and lamination applications. | |
| Synpol 150 | Synpol Products PVT. Ltd | Synpol 150 is a reactive polyamide resin. This product has a density at 25°C of 0.975-0.985 g/cm3. Synpol 150 is most commonly used as a hardener in solvent-free coating, adhesive, and lamination applications. | |
| Synpol 160 | Synpol Products PVT. Ltd | Synpol 160 is a reactive polyamide resin. This product has a density at 25°C of 0.94-0.96 g/cm3. Synpol 160 is most commonly used as a hardener in solvent-free coating, adhesive, and lamination applications. | |
| Synpol 160 LP | Synpol Products PVT. Ltd | Synpol 160 LP is a reactive polyamide resin. This product has a density at 25°C of 0.92-0.94 g/cm3. Synpol 160 LP is most commonly used as a hardener in solvent-free coating applications. | |
| Synpol 1800 | Synpol Products PVT. Ltd | Synpol 1800 is a bisphenol A-based, unmodified plasticizer. This product has a density of 1.17-1.19 g/cm3 and a melting point of 125-135ºC. Synpol 1800 is most commonly used in thermosetting bake finish and chemical-resistant container coating application...展开 Synpol 1800 is a bisphenol A-based, unmodified plasticizer. This product has a density of 1.17-1.19 g/cm3 and a melting point of 125-135ºC. Synpol 1800 is most commonly used in thermosetting bake finish and chemical-resistant container coating applications. 收起 | |
| Synpol 200 | Synpol Products PVT. Ltd | Synpol 200 is a bisphenol A-based, unmodified epoxy resin. This product has a viscosity at 25°C of 120-160 Poises. Synpol 200 is most commonly used in coating, lamination, and adhesive applications. | |
| Synpol 2080 | Synpol Products PVT. Ltd | Synpol 2080 is a coconut fatty acid-modified epoxy ester. This product has a density of 0.97-0.98 g/cm3. Synpol 2080 is most commonly used in clear and pigmented electronic and appliance finish applications. | |
| Synpol 210 | Synpol Products PVT. Ltd | Synpol 210 is a bisphenol A-based, unmodified reactive diluent. This product has a viscosity at 25°C of 180-210 Poises. Synpol 210 is most commonly used in coating, lamination, and adhesive applications. | |
| Synpol 220 | Synpol Products PVT. Ltd | Synpol 220 is a bisphenol A-based, unmodified reactive diluent. This product has a viscosity at 25°C of 180-200 Poises. Synpol 220 is most commonly used in coating, lamination, and adhesive applications. | |
| Synpol 230 | Synpol Products PVT. Ltd | Synpol 230 is a bisphenol A-based, unmodified plasticizer. This product has a viscosity at 25°C of 230-250 Poises. Synpol 230 is most commonly used in coating, lamination, and adhesive applications. | |
| Synpol 280 | Synpol Products PVT. Ltd | Synpol 280 is a bisphenol A-based, unmodified epoxy resin. This product has a density of 1.18-1.19 g/cm3. Synpol 280 is most commonly used in high-solids coating, adhesive, and lamination applications. | |
| Synpol 280 | Synpol Products PVT. Ltd | Synpol 280 is a bisphenol A-based, unmodified plasticizer. This product has a density of 1.22-1.24 g/cm3. Synpol 280 is most commonly used in heat-resistant laminate, electrical casting, adhesive, and coating applications. | |
| Synpol 4000 | Synpol Products PVT. Ltd | Synpol 4000 is a bisphenol A-based, unmodified plasticizer. This product has a density of 1.18-1.19 g/cm3 and a melting point of 145-155ºC. Synpol 4000 is most commonly used in thermosetting bake finish and chemical-resistant container coating application...展开 Synpol 4000 is a bisphenol A-based, unmodified plasticizer. This product has a density of 1.18-1.19 g/cm3 and a melting point of 145-155ºC. Synpol 4000 is most commonly used in thermosetting bake finish and chemical-resistant container coating applications where increased substrate adhesion is required. 收起 | |
| Synpol 450XX | Synpol Products PVT. Ltd | Synpol 450XX is a bisphenol A-based, unmodified epoxy resin. This product has a density of 1.07-1.09 g/cm3. Synpol 450XX is most commonly used in chemical-resistant, air-dry, and bake coating applications. | |
| Synpol 5545 | Synpol Products PVT. Ltd | Synpol 5545 is a linseed fatty acid-modified epoxy ester. This product has a density of 0.92-0.93 g/cm3. Synpol 5545 is most commonly used in air-drying maintenance finish applications. | |
| Synpol 6040 | Synpol Products PVT. Ltd | Synpol 6040 is a soya fatty acid-modified epoxy ester. This product has a density of 0.96-0.97 g/cm3. Synpol 6040 is most commonly used in clear and pigmented electronic and appliance finish applications. | |
| Synpol AT-67 | Synpol Products PVT. Ltd | Synpol AT-67 is an acrylic copolymer solution. This product has a density of 1.02-1.03 g/cm3 and a total non-volatile content of 56-60%. Synpol AT-67 is most commonly used in high-performance coating applications. | |
| Synpol AT-68 | Synpol Products PVT. Ltd | Synpol AT-68 is an acrylic copolymer solution. This product has a density of 1.01-1.03 g/cm3 and a total non-volatile content of 58-62%. Synpol AT-68 is most commonly used in flexible paint applications. | |
| Synpol B-10 | Synpol Products PVT. Ltd | Synpol B-10 is a thermoplastic homopolymer acrylic resin solution. This product has a density of 0.98-0.99 g/cm3 and a total non-volatile content of 38-42%. Synpol B-10 is most commonly used in screen printing, vinyl coating, plastic coating, gravure pr...展开 Synpol B-10 is a thermoplastic homopolymer acrylic resin solution. This product has a density of 0.98-0.99 g/cm3 and a total non-volatile content of 38-42%. Synpol B-10 is most commonly used in screen printing, vinyl coating, plastic coating, gravure printing ink, and PVC coating primer applications. 收起 | |
| Synpol B-30 | Synpol Products PVT. Ltd | Synpol B-30 is a polyvinyl butyral resin in a clear water white-colored, free flowing, granular form. This product has a density at 25°C of 1.05-1.15 g/cm3. Synpol B-30 is most commonly used in metal, textile, paper and foil coating, thermosetting and h...展开 Synpol B-30 is a polyvinyl butyral resin in a clear water white-colored, free flowing, granular form. This product has a density at 25°C of 1.05-1.15 g/cm3. Synpol B-30 is most commonly used in metal, textile, paper and foil coating, thermosetting and hot-melt adhesive, wood finish, and printing ink applications. 收起 | |
| Synpol B-60 | Synpol Products PVT. Ltd | Synpol B-60 is a polyvinyl butyral resin in a clear water white-colored, free flowing, granular form. This product has a density at 25°C of 1.05-1.15 g/cm3 and a softening point of 51-55°C. Synpol B-60 is most commonly used in metal, textile, paper and ...展开 Synpol B-60 is a polyvinyl butyral resin in a clear water white-colored, free flowing, granular form. This product has a density at 25°C of 1.05-1.15 g/cm3 and a softening point of 51-55°C. Synpol B-60 is most commonly used in metal, textile, paper and foil coating, thermosetting and hot-melt adhesive, wood finish, and printing ink applications. 收起 | |
| Synpol B-722 | Synpol Products PVT. Ltd | Synpol B-722 is a thermoplastic homopolymer acrylic resin solution. This product has a density of 0.99-1.00 g/cm3 and a total non-volatile content of 48-52%. Synpol B-722 is most commonly used in acrylic lacquer, wood lacquer, ink, and PVC coating appli...展开 Synpol B-722 is a thermoplastic homopolymer acrylic resin solution. This product has a density of 0.99-1.00 g/cm3 and a total non-volatile content of 48-52%. Synpol B-722 is most commonly used in acrylic lacquer, wood lacquer, ink, and PVC coating applications. 收起 | |
| Synpol BG-40 | Synpol Products PVT. Ltd | Synpol BG-40 is a butylated UF amino resin. This product has a non-volatile compound content of 72-76% and a density at 25°C of 1.01-1.03 g/cm3. Synpol BG-40 is most commonly used in high-gloss stoving enamel applications. | |
| Synpol L-9 | Synpol Products PVT. Ltd | Synpol L-9 is a butylated phenolic formaledyde resin. This product has a density of 0.98-0.99 g/cm3 and a total non-volatile content of 58-62%. Synpol L-9 is most commonly used in etch primer, adhesive, insulating varnish, and wire enamel applications. | |
| Synpol L-97 | Synpol Products PVT. Ltd | Synpol L-97 is a butylated phenolic formaldehyde resin. This product has a density of 0.98-0.99 g/cm3 and a total non-volatile content of 58-62%. Synpol L-97 is most commonly used in etch primer, adhesive, insulating varnish, and wire enamel applications. | |
| Synpol M-70 | Synpol Products PVT. Ltd | Synpol M-70 is a butylated MF amino resin. This product has a non-volatile compound content of 68-72% and a density at 25°C of 1.01-1.03 g/cm3. Synpol M-70 is most commonly used in flexible lacquer applications. | |
| Synpol MF-268 | Synpol Products PVT. Ltd | Synpol MF-268 is a butylated MF amino resin. This product has a non-volatile compound content of 58-62% and a density at 25°C of 1.01-1.03 g/cm3. Synpol MF-268 is most commonly used in stoving enamel applications. | |
| Synpol MF-310 | Synpol Products PVT. Ltd | Synpol MF-310 is a butylated MF amino resin. This product has a non-volatile compound content of 58-62% and a density at 25°C of 1.01-1.03 g/cm3. Synpol MF-310 is most commonly used in high-gloss enamel applications. | |
| Synpol SK-10 | Synpol Products PVT. Ltd | Synpol SK-10 is a ketone formaldehyde resin. This product has a hydroxyl value of 250-320 mgKOH/g. Synpol SK-10 is most commonly used in NC lacquer, printing ink, and surface coating applications. |
