UL Prospector

成功!

成功保存搜索结果
15% POTASSIUM HEX-CEM OMG Borchers GmbH 一种2-乙基己酸钾盐,溶解于二甘醇,它可与钴结合促进不饱和聚酯的催化反应。它可以减少由于钴引起的UPS体系的色变问题。它也可进一步稳定流变性和可使用时间,或水性双组份PUR体系,另外它可改善这些涂料体系的雾影值
21% COBALT HYDROXY TEN-CEM OMG Borchers GmbH 21% COBALT HYDROXY TEN-CEM是一种牺牲型催干剂,浆状。它可稳定通过氧化催干的溶剂型油漆体系的催干效果。该产品与催干剂的分解同步,以可控的方式起作用,但不影响油漆体系的初始催干效果,对于涂膜没有不良影响
801-A Organic Bentonite Rheologic Additives Zhejiang Qinghong New Material Co., Ltd. 浙江青虹新材料有限公司 801-A是一种有机膨润土高效触变凝胶, 适用于低-中极性溶剂体系中。本产品具有很高的粘度, 最适于制造高稠度油漆。
801-B Organic Bentonite Rheologic Additives Zhejiang Qinghong New Material Co., Ltd. 浙江青虹新材料有限公司 801-B是一种有机膨润土高效触变凝胶, 适用于脂肪烃类、卤代烃、植物油、芳烃类或芳烃类与醋、酮、酯、醚、醇等混合溶剂的低、中、高级溶剂体系中,本产品相当于Bentone34。
801-C Organic Bentonite Rheologic Additives Zhejiang Qinghong New Material Co., Ltd. 浙江青虹新材料有限公司 801-C Organic Bentonite Rheologic Additives is widely used in wood primer and ink. It has better dispersion and thickening capacity than traditional organic clay.
801-D Easily Dispersible Organic Bentonite Rheologic Additives Zhejiang Qinghong New Material Co., Ltd. 浙江青虹新材料有限公司 801-D是一种容易分散、自活化型有机膨润土。在溶剂或树脂中极易分散, 中等以下剪切条件和短时间就能完全分散至20μm以下。在溶剂中易分散, 表观粘度较小, 而在树脂体系中具有极高的凝胶效率, 增稠性, 抗流挂性, 防沉性好。在溶剂和树脂体系中透明度高。本产品相当于Bentone SD-1。
801-D2 Self-Dispersing Organic Bentonite Rheologic Additives Zhejiang Qinghong New Material Co., Ltd. 浙江青虹新材料有限公司 801-D2是自我分散型的有机膨润土。无需极性活化剂和高剪切条件即可分散。适用于酮类、酯类、乙二醇、醚类和醚酯类、醇类等中至高级溶剂体系。其卓越的悬浮性能, 可大大简化配方和制造步骤, 简化后修正工艺, 可替代气相二氧化硅, 有效降低成本。本产品相当于Bentone SD-2。
806 Organic Bentonite Rheological Additive Zhejiang Qinghong New Material Co., Ltd. 浙江青虹新材料有限公司 806作为一种优异高效的增稠,防沉、抗流挂触变助剂,广泛应用于工业漆、油墨、家具漆、润滑脂、防腐漆。
808 Dispersible Organic Bentonite Rheological Additive Zhejiang Qinghong New Material Co., Ltd. 浙江青虹新材料有限公司 808是一个种易分散广谱型流变助剂,应用于防腐漆,油墨,船舶漆,工业装饰漆,汽车底漆及密封材料等。
881-A Organic Bentonite Rheologic Additives Zhejiang Qinghong New Material Co., Ltd. 浙江青虹新材料有限公司 881-A是用季铵盐改性的有机膨润土, 可以用于油田钻井泥浆和油基解卡剂, 适用于柴油为主的油水乳化油基体系。881-A具有悬浮性、触变性、稳定性好的特性。本产品相当于VG-69, VERSA。
881-B Economical Type Organic Bentonite Rheologic Additives Zhejiang Qinghong New Material Co., Ltd. 浙江青虹新材料有限公司 881-B流变助剂是一种传统型有机胺改性蒙脱石的有机膨润土,适用于低、中极性溶剂的脂肪族、芳香族体系,如矿物油、石蜡油、甲苯、二甲苯、200#溶剂油等体系中。
Additive OF OMG Borchers GmbH 一种透明的水样液体,带有类似酯的气味,用在聚氨酯涂料中以约束水分。
Additive TI OMG Borchers GmbH 一种低粘度单官能异氰酸酯,与水反应生成一种惰性酰胺。用于去除聚氨酯涂料配方中的微量水分,防止由于潮湿产生的问题。
Ascinin® Anti Skin 0444 OMG Borchers GmbH 它是一种新型抗结皮助剂,用于溶剂型涂料、印刷油墨和颜料色浆,以及低VOC高固含量油漆,基于醇酸树脂、环氧 酯和其它氧气干燥主体树脂。
Ascinin® Anti Skin 0445 OMG Borchers GmbH 它是一种用于溶剂型和水性氧气干燥涂料的新型抗结皮助剂。含有特殊的高抗氧化能力的活性成分化合物。
Ascinin® P OMG Borchers GmbH 取代酚的二甲苯、正丁醇溶液。用于透明、着色漆和基于干性油醇酸树脂油漆的抗结皮助剂。用于底漆时可防止外涂层起皮。消除烘干漆的表面缺陷。
Ascinin® Special OMG Borchers GmbH 一种替代苯酚、溶于二甲苯的挥发性肟和正丁醇的混合物。作为抗起皮助剂,用在基于干性油或醇酸树脂的透明和着色油漆中。
BAL 101 H WS-70 Bonyan Kala Chemie Co. BAL 101 H WS-70 is a long oil alkyd resin that is used for its hardness, drying, gloss retention, adhesion, and coverage properties. This product has a viscosity of 800-1500 stoke at 25°C and is used in industrial varnishes, wood and metal coatings, and g...展开 BAL 101 H WS-70 is a long oil alkyd resin that is used for its hardness, drying, gloss retention, adhesion, and coverage properties. This product has a viscosity of 800-1500 stoke at 25°C and is used in industrial varnishes, wood and metal coatings, and gloss and semi gloss architectural paints. 收起
BAL 101 L WS-70 Bonyan Kala Chemie Co. BAL 101 L WS-70 is a long oil alkyd resin that is used for its hardness, drying, gloss retention, adhesion, and coverage properties. This product has a viscosity of 350-650 stoke at 25°C and is used in industrial varnishes, metal structural coatings, and ...展开 BAL 101 L WS-70 is a long oil alkyd resin that is used for its hardness, drying, gloss retention, adhesion, and coverage properties. This product has a viscosity of 350-650 stoke at 25°C and is used in industrial varnishes, metal structural coatings, and gloss and semi gloss architectural paints. 收起
BAL 102 WS-70 Bonyan Kala Chemie Co. BAL 102 WS-70 is a long oil alkyd resin that is used for its coverage, drying, gloss retention, pigment wetting, and dispersing properties. This product has a viscosity of 250-500 stoke at 25°C and is mainly used as a paste in architectural paints, and in...展开 BAL 102 WS-70 is a long oil alkyd resin that is used for its coverage, drying, gloss retention, pigment wetting, and dispersing properties. This product has a viscosity of 250-500 stoke at 25°C and is mainly used as a paste in architectural paints, and in architectural and industrial varnishes. 收起
BAL 103 WS-70 Bonyan Kala Chemie Co. BAL 103 WS-70 is a long oil alkyd resin that is used for its hardness, drying, gloss retention, adhesion, pigment wetting, dispersing, and coverage properties. This product has a viscosity of 330-550 stoke at 25°C and is used in industrial varnishes, wood...展开 BAL 103 WS-70 is a long oil alkyd resin that is used for its hardness, drying, gloss retention, adhesion, pigment wetting, dispersing, and coverage properties. This product has a viscosity of 330-550 stoke at 25°C and is used in industrial varnishes, wood and metal coatings, and gloss and semi gloss architectural paints. 收起
BAL 104 WS-70 Bonyan Kala Chemie Co. BAL 104 WS-70 is a long oil alkyd resin that is used for its solvent acceptation and filler accountability properties. This product has a viscosity of 1000-3500 stoke at 25°C and is mainly used in metal structural coatings, industrial, wood, metal, anti-c...展开 BAL 104 WS-70 is a long oil alkyd resin that is used for its solvent acceptation and filler accountability properties. This product has a viscosity of 1000-3500 stoke at 25°C and is mainly used in metal structural coatings, industrial, wood, metal, anti-corrosion and anti-rust primers. 收起
BAL 106 H WS-70 Bonyan Kala Chemie Co. BAL 106 H WS-70 is a long oil alkyd resin that is used for its drying, gloss retention, solvent acceptation, good coverage and filler accountability properties. This product has a viscosity of 500-1500 stoke at 25°C and is mainly used in metal structural,...展开 BAL 106 H WS-70 is a long oil alkyd resin that is used for its drying, gloss retention, solvent acceptation, good coverage and filler accountability properties. This product has a viscosity of 500-1500 stoke at 25°C and is mainly used in metal structural, wood, and metal coatings, as well as gloss and semi gloss architectural paints. 收起
BAL 106 L WS-70 Bonyan Kala Chemie Co. BAL 106 L WS-70 is a long oil alkyd resin that is used for its drying, gloss retention, pigment wetting, good coverage and dispersing properties. This product has a viscosity of 300-500 stoke at 25°C and is mainly used in metal structural, wood, and metal...展开 BAL 106 L WS-70 is a long oil alkyd resin that is used for its drying, gloss retention, pigment wetting, good coverage and dispersing properties. This product has a viscosity of 300-500 stoke at 25°C and is mainly used in metal structural, wood, and metal coatings, spray paints, as well as gloss and semi gloss architectural paints. 收起
BAL 108 WS-70 Bonyan Kala Chemie Co. BAL 108 WS-70 is a long oil alkyd resin that is used for its hardness, drying, gloss retention, solvent acceptation, good coverage and adhesion properties. This product has a viscosity of 500-1000 stoke at 25°C and is mainly used in metal structural, wood...展开 BAL 108 WS-70 is a long oil alkyd resin that is used for its hardness, drying, gloss retention, solvent acceptation, good coverage and adhesion properties. This product has a viscosity of 500-1000 stoke at 25°C and is mainly used in metal structural, wood, and metal coatings, as well as gloss and semi gloss architectural paints. 收起
BAL 116 WS-70 Bonyan Kala Chemie Co. BAL 116 WS-70 is a long oil alkyd resin that is used for its drying, gloss retention, solvent acceptation, hardness and filler accountability properties. This product has a viscosity of 1000-2500 stoke at 25°C and is mainly used in metal structural, wood,...展开 BAL 116 WS-70 is a long oil alkyd resin that is used for its drying, gloss retention, solvent acceptation, hardness and filler accountability properties. This product has a viscosity of 1000-2500 stoke at 25°C and is mainly used in metal structural, wood, and metal coatings, as well as gloss and semi gloss architectural paints. 收起
BAL 118 WS-70 Bonyan Kala Chemie Co. BAL 118 WS-70 is a long oil alkyd resin that is used for its drying, gloss retention, solvent acceptation, good coverage and filler accountability properties. This product has a viscosity of 1000-3000 stoke at 25°C and is mainly used in wood and metal coa...展开 BAL 118 WS-70 is a long oil alkyd resin that is used for its drying, gloss retention, solvent acceptation, good coverage and filler accountability properties. This product has a viscosity of 1000-3000 stoke at 25°C and is mainly used in wood and metal coatings, as well as gloss and semi gloss architectural paints. 收起
BAL 120 WS-70 Bonyan Kala Chemie Co. BAL 120 WS-70 is a long oil alkyd resin that is used for its drying, gloss retention, solvent acceptation, good coverage and solvent acceptation properties. This product has a viscosity of 300-700 stoke at 25°C and is mainly used in wood and metal coating...展开 BAL 120 WS-70 is a long oil alkyd resin that is used for its drying, gloss retention, solvent acceptation, good coverage and solvent acceptation properties. This product has a viscosity of 300-700 stoke at 25°C and is mainly used in wood and metal coatings, as well as gloss and semi gloss architectural paints. 收起
BAM 202 WS-55 Bonyan Kala Chemie Co. BAM 202 WS-55 is a medium oil alkyd resin that is used for its surface and deep drying, gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 350-900 stoke ...展开 BAM 202 WS-55 is a medium oil alkyd resin that is used for its surface and deep drying, gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 350-900 stoke at 25°C and is mainly used in zinc chromate primers, industrial machinery coatings, metal structural coatings, and spray, auto body repair and industrial air-drying paints. 收起
BAM 203 X-60 Bonyan Kala Chemie Co. BAM 203 X-60 is a medium oil alkyd resin that is used for its surface and deep drying, gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 50-100 stoke at...展开 BAM 203 X-60 is a medium oil alkyd resin that is used for its surface and deep drying, gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 50-100 stoke at 25°C and is mainly used in auto body repair paints, metallic paints, industrial machinery coatings, metal structural coatings, and industrial air-drying paints. 收起
BAM 204 WS-50 Bonyan Kala Chemie Co. BAM 204 WS-50 is a medium oil alkyd resin that is used for its surface and deep drying, gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 150-350 stoke ...展开 BAM 204 WS-50 is a medium oil alkyd resin that is used for its surface and deep drying, gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 150-350 stoke at 25°C and is mainly used in cabinet and spray paints, industrial air-drying paints, metal structural coatings, industrial machinery coatings, paste for architectural paints, and anti-corrosion primers. 收起
BAM 208 WSX-55 Bonyan Kala Chemie Co. BAM 208 WSX-55 is a medium oil alkyd resin that is used for its surface and deep drying, gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 80-180 stoke ...展开 BAM 208 WSX-55 is a medium oil alkyd resin that is used for its surface and deep drying, gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 80-180 stoke at 25°C and is mainly used in auto body repair paints, industrial machinery coatings, cabinet and spray paints, and industrial air-drying paints. 收起
BAM 212 X-60 Bonyan Kala Chemie Co. BAM 212 X-60 is a medium oil alkyd resin that is used for its surface and deep drying, gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 60-90 stoke at ...展开 BAM 212 X-60 is a medium oil alkyd resin that is used for its surface and deep drying, gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 60-90 stoke at 25°C and is mainly used in auto body repair paints, industrial machinery coatings, metallic paints, industrial air-drying paints, and paint paste. 收起
BAS 302 X-60 Bonyan Kala Chemie Co. BAS 302 X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 50-80 stoke at 25°C and is mainly used in...展开 BAS 302 X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 50-80 stoke at 25°C and is mainly used in nitro-cellulose paints and lacquers, alkyd amin varnishes, amino resin based stoving paints, acid curing coatings, and printing inks. 收起
BAS 305 X-50 Bonyan Kala Chemie Co. BAS 305 X-50 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 40-90 stoke at 25°C and is mainly used in...展开 BAS 305 X-50 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 40-90 stoke at 25°C and is mainly used in hammer finish paints, anti-corrosion primers, fast dry paints, and industrial air-drying paints. 收起
BAS 307 X-60 Bonyan Kala Chemie Co. BAS 307 X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 250-450 stoke at 25°C and is mainly used ...展开 BAS 307 X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 250-450 stoke at 25°C and is mainly used in nitro-cellulose lacquers, amino resin based stoving paints, acid curing coatings, and auto parts stoving paints. 收起
BAS 310 H X-60 Bonyan Kala Chemie Co. BAS 310 H X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 200-400 stoke at 25°C and is mainly use...展开 BAS 310 H X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 200-400 stoke at 25°C and is mainly used in nitro-cellulose paints and lacquers, alkyd amin varnishes, acid curing coatings, and anti-corrosion primers. 收起
BAS 310 L X-60 Bonyan Kala Chemie Co. BAS 310 L X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 100-200 stoke at 25°C and is mainly use...展开 BAS 310 L X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 100-200 stoke at 25°C and is mainly used in nitro-cellulose paints and lacquers, alkyd amin varnishes, acid curing coatings, and anti-corrosion primers. 收起
BAS 312 X-60 Bonyan Kala Chemie Co. BAS 312 X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 80-120 stoke at 25°C and is mainly used i...展开 BAS 312 X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 80-120 stoke at 25°C and is mainly used in nitro-cellulose paints, alkyd amin lacquers, and anti-corrosion primers. 收起
BAS 313 X-60 Bonyan Kala Chemie Co. BAS 313 X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 600-1000 stoke at 25°C and is mainly used...展开 BAS 313 X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 600-1000 stoke at 25°C and is mainly used in nitro-cellulose paints, alkyd amin lacquers, and anti-corrosion primers. 收起
BD-Ca-5 Bonyan Kala Chemie Co. BD-Ca-5 is a drier that appears as a clear yellow liquid. This product is an auxiliary drier and has a metal content of 5±0.2. It is often used for air through and surface drying systems.
BD-Co-10 Bonyan Kala Chemie Co. BD-Co-10 is a drier that appears as a violet liquid. This product is an active oxidation drier and has a metal content of 10±0.2. It is often used as an accelerator for unsaturated polyester resins and in air drying systems.
BD-Pb-32 Bonyan Kala Chemie Co. BD-Pb-32 is a drier that appears as a clear yellow liquid. This product is a through drier and has a metal content of 32±0.5. It is often used for air through and surface drying systems.
BD-Zr-18 Bonyan Kala Chemie Co. BD-Zr-18 is a drier that appears as a light yellow liquid. This product is a through drier and has a metal content of 18±0.3. It is often used in air drying systems, metallic paints, metallic varnishes and coatings.
BUP 612 Bonyan Kala Chemie Co. BUP 612 is an unsaturated polyester resin that is used for its moderate gel time, good adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, and good flexibility and good resistant to impact. This product has a ...展开 BUP 612 is an unsaturated polyester resin that is used for its moderate gel time, good adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, and good flexibility and good resistant to impact. This product has a viscosity of 550-750CP at 25°C and is commonly used in general purpose applications. 收起
BUP 615 Bonyan Kala Chemie Co. BUP 615 is an unsaturated polyester resin that is used for its low color, good adhesion to glass fibers, medium viscosity, and good physical and mechanical properties after curing. This product has a viscosity of 380-480CP at 25°C and is commonly used in ...展开 BUP 615 is an unsaturated polyester resin that is used for its low color, good adhesion to glass fibers, medium viscosity, and good physical and mechanical properties after curing. This product has a viscosity of 380-480CP at 25°C and is commonly used in general purpose applications. 收起
BUP 620 Bonyan Kala Chemie Co. BUP 620 is an unsaturated polyester resin that is used for its low color, excellent adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, and filler appropriate accountability properties. This product has a visc...展开 BUP 620 is an unsaturated polyester resin that is used for its low color, excellent adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, and filler appropriate accountability properties. This product has a viscosity of 400-650CP at 25°C and is commonly used in general purpose applications and goods that need high transparency. 收起
BUP 621 Bonyan Kala Chemie Co. BUP 621 is an unsaturated polyester resin that is used for its low color, good adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, and filler appropriate accountability properties. This product has a viscosity...展开 BUP 621 is an unsaturated polyester resin that is used for its low color, good adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, and filler appropriate accountability properties. This product has a viscosity of 380-480CP at 25°C and is commonly used in general purpose applications. 收起
BUP 623 Bonyan Kala Chemie Co. BUP 623 is an unsaturated polyester resin that is used for its good adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, limited shrinkage, and filler appropriate accountability properties. This product has a v...展开 BUP 623 is an unsaturated polyester resin that is used for its good adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, limited shrinkage, and filler appropriate accountability properties. This product has a viscosity of 500-700CP at 25°C and is commonly used in general purpose applications. 收起
BUP 624 Bonyan Kala Chemie Co. BUP 624 is an unsaturated polyester resin that is used for its low color, medium viscosity, good physical and mechanical properties after curing, resistant to UV, and filler appropriate accountability properties. This product has a viscosity of 450-700CP ...展开 BUP 624 is an unsaturated polyester resin that is used for its low color, medium viscosity, good physical and mechanical properties after curing, resistant to UV, and filler appropriate accountability properties. This product has a viscosity of 450-700CP at 25°C and is commonly used in general purpose applications. 收起
BUP 625 Bonyan Kala Chemie Co. BUP 625 is an unsaturated polyester resin that is used for its medium viscosity, good physical and mechanical properties after curing, and good flexibility and good resistant to impact. This product has a viscosity of 350-500CP at 25°C and is commonly use...展开 BUP 625 is an unsaturated polyester resin that is used for its medium viscosity, good physical and mechanical properties after curing, and good flexibility and good resistant to impact. This product has a viscosity of 350-500CP at 25°C and is commonly used in general purpose applications. 收起
BUP 626 Bonyan Kala Chemie Co. BUP 626 is an unsaturated polyester resin that is used for its low color, limited water absorption, medium viscosity, good physical and mechanical properties after curing, and good flexibility and good resistant to impact. This product has a viscosity of ...展开 BUP 626 is an unsaturated polyester resin that is used for its low color, limited water absorption, medium viscosity, good physical and mechanical properties after curing, and good flexibility and good resistant to impact. This product has a viscosity of 450-650CP at 25°C and is commonly used in general purpose applications. 收起
BUP 629 Bonyan Kala Chemie Co. BUP 629 is an unsaturated polyester resin that is used for its low color, good adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, and good flexibility and good resistant to impact. This product has a viscosit...展开 BUP 629 is an unsaturated polyester resin that is used for its low color, good adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, and good flexibility and good resistant to impact. This product has a viscosity of 700-1000CP at 25°C and is commonly used in general purpose applications and goods that need high transparency. 收起
BUP 630 Bonyan Kala Chemie Co. BUP 630 is an unsaturated polyester resin that is used for its low color, good adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, limited water absorption, resistant to hydrolysis, and good flexibility and go...展开 BUP 630 is an unsaturated polyester resin that is used for its low color, good adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, limited water absorption, resistant to hydrolysis, and good flexibility and good resistant to impact. This product has a viscosity of 450-700CP at 25°C and is commonly used in general purpose applications and gel coats. 收起
BUP 631 Bonyan Kala Chemie Co. BUP 631 is an unsaturated polyester resin that is used for its moderate gel time, good adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, limited water absorption, and resistant to hydrolysis. This product ha...展开 BUP 631 is an unsaturated polyester resin that is used for its moderate gel time, good adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, limited water absorption, and resistant to hydrolysis. This product has a viscosity of 700-1000CP at 25°C and is commonly used in general purpose applications. 收起
BUP 640 Bonyan Kala Chemie Co. BUP 640 is an unsaturated polyester resin that is used for its low gel time, low color, high viscosity, good physical and mechanical properties after curing, and good flexibility and good transparency. This product has a viscosity of 1200-1700CP at 25°C a...展开 BUP 640 is an unsaturated polyester resin that is used for its low gel time, low color, high viscosity, good physical and mechanical properties after curing, and good flexibility and good transparency. This product has a viscosity of 1200-1700CP at 25°C and is commonly used in general purpose applications and goods that need high transparency. 收起
BUP 643 Bonyan Kala Chemie Co. BUP 643 is an unsaturated polyester resin that is used for its low gel time, medium viscosity, good physical and mechanical properties after curing, and good flexibility and good resistance to impact. This product has a viscosity of 900-1500CP at 25°C and...展开 BUP 643 is an unsaturated polyester resin that is used for its low gel time, medium viscosity, good physical and mechanical properties after curing, and good flexibility and good resistance to impact. This product has a viscosity of 900-1500CP at 25°C and is commonly used in general purpose applications. 收起
BUP 660 Bonyan Kala Chemie Co. BUP 660 is an unsaturated polyester resin that is used for its low color, good adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, limited water absorption, and resistant to hydrolysis. This product has a visc...展开 BUP 660 is an unsaturated polyester resin that is used for its low color, good adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, limited water absorption, and resistant to hydrolysis. This product has a viscosity of 600-900CP at 25°C and is commonly used in general purpose applications and gel coats. 收起
BUP 665 Bonyan Kala Chemie Co. BUP 665 is an unsaturated polyester resin that is used for its low color, good adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, limited water absorption, and resistant to hydrolysis. This product has a visc...展开 BUP 665 is an unsaturated polyester resin that is used for its low color, good adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, limited water absorption, and resistant to hydrolysis. This product has a viscosity of 800-1200CP at 25°C and is commonly used in general purpose applications and gel coats. 收起
BUP 690 Bonyan Kala Chemie Co. BUP 690 is an unsaturated polyester resin that is used for its moderate gel time, low viscosity, good physical and mechanical properties after curing, and filler appropriate accountability properties. This product has a viscosity of 300-450CP at 25°C and ...展开 BUP 690 is an unsaturated polyester resin that is used for its moderate gel time, low viscosity, good physical and mechanical properties after curing, and filler appropriate accountability properties. This product has a viscosity of 300-450CP at 25°C and is commonly used in general purpose applications. 收起
Bayoxide® Z active OMG Borchers GmbH 氧化锌。
Borchers® AF 0670 OMG Borchers GmbH 带憎水成分的改性聚硅氧烷的水性乳液。可用作研磨工艺的消泡剂,以及工业和装饰体系和粘胶的后添加稀释成分。另外,该产品具备涂装后脱气的性能。
Borchers® AF 0871 OMG Borchers GmbH Borchers® AF 0871是一种改性有机聚硅氧烷的20%乳液。它可有效阻止分散和碾磨工艺中气泡的形成,可破坏水性涂料中的稳定气泡。它可用水稀释,在大多数聚合物乳液中有效。Borchers® AF 0871是一种高效消泡剂,可阻止和降低气泡形成,尤其是分散阶段。它尤其适用于高填充的颜料体系和颜料浆体碾磨。其有效性并不依赖于固化机理。Borchers® AF 0871可增加生产过程和施工中的比重。施工后可形成均一的涂膜。它设计用于水性乳液和可用水稀释的体系。有效性在基于聚氨酯(包括丙烯酸酯改性)和丙烯...展开 Borchers® AF 0871是一种改性有机聚硅氧烷的20%乳液。它可有效阻止分散和碾磨工艺中气泡的形成,可破坏水性涂料中的稳定气泡。它可用水稀释,在大多数聚合物乳液中有效。Borchers® AF 0871是一种高效消泡剂,可阻止和降低气泡形成,尤其是分散阶段。它尤其适用于高填充的颜料体系和颜料浆体碾磨。其有效性并不依赖于固化机理。Borchers® AF 0871可增加生产过程和施工中的比重。施工后可形成均一的涂膜。它设计用于水性乳液和可用水稀释的体系。有效性在基于聚氨酯(包括丙烯酸酯改性)和丙烯酸酯(也是羟基聚丙烯酸酯)的化学固化体系中已被验证 收起
Borchers® AF 1171 OMG Borchers GmbH Borchers® AF 1171是一种不含溶剂的消泡剂,基于有机硅,含憎水颗粒,适用于水性、溶剂型和不含溶剂的体系。它尤其适用于水性装饰漆和水性一般工业涂料。Borchers® AF 1171易添加。它也可加入碾磨基质中,稀释基质中或作为后添加助剂。由于它独特的分子结构,Borchers® AF 1171可改善涂膜光泽、基材润湿、有色体系的着色力并防止微泡的形成。该产品在水中易乳化并易于添加。其效率与固化机理无关。Borchers® AF 1171的特征是具有良好的基料相容性,添加仅需很低的剪切力。当制...展开 Borchers® AF 1171是一种不含溶剂的消泡剂,基于有机硅,含憎水颗粒,适用于水性、溶剂型和不含溶剂的体系。它尤其适用于水性装饰漆和水性一般工业涂料。Borchers® AF 1171易添加。它也可加入碾磨基质中,稀释基质中或作为后添加助剂。由于它独特的分子结构,Borchers® AF 1171可改善涂膜光泽、基材润湿、有色体系的着色力并防止微泡的形成。该产品在水中易乳化并易于添加。其效率与固化机理无关。Borchers® AF 1171的特征是具有良好的基料相容性,添加仅需很低的剪切力。当制备颜料色浆时,有效抑制了高剪切力碾磨过程中泡沫的形成。在基于水溶性醇酸、聚氨酯、苯乙烯、直链和乙烯基丙烯酸酯和羟基聚丙烯酸酯的物理和化学干燥体系中,Borchers® AF 1171可快速释放涂膜表面的空气。除了水性体系,Borchers® AF 1171也可用于不含溶剂和溶剂型醇酸 收起
Borchers® AF 1270 OMG Borchers GmbH Borchers® AF 1270是一种以氟化有机改性的聚硅氧烷为活性组分的溶液,它是高效并相容性好的消泡剂和脱气助剂,具有良好的防缩孔特性。Borchers® AF 1270是一种高活性硅基泡沫控制剂,具有脱气的特性。它适用于透明和有色溶剂型体系
Borchers® AF T OMG Borchers GmbH 高效的无硅树脂消泡剂,用于乳液油漆、纸张涂料、乱丝、粘胶、织物辅助剂和混凝土添加剂。
Borchers® Deca Barium 12.5 OMG Borchers GmbH Borchers® Deca Barium 12.5 is a highly efficient secondary drier. Barium improves through drying and has good pigment wetting properties. Borchers® Deca driers are metal salts of neodecanoic acids. Barium is used as a wetting agent for pigments and extend...展开 Borchers® Deca Barium 12.5 is a highly efficient secondary drier. Barium improves through drying and has good pigment wetting properties. Borchers® Deca driers are metal salts of neodecanoic acids. Barium is used as a wetting agent for pigments and extenders in solvent based coatings systems. It improves gloss and prevents adsorption of the primary driers by pigments and extenders thereby increasing coating stability during prolonged storage. In combination with Borchi® OXY - Coat, Borchers® Deca Cobalt or Borchers® Deca Manganese, barium has a similar effect to that of lead and will promote through drying in many formulations. Borchers® Deca Barium 12.5 is used in solventborne systems based on alkyds and epoxy esters that crosslink by oxidation. 收起
Borchers® Deca Cobalt 10 OMG Borchers GmbH Borchers® Deca Cobalt 10 is an important metal drier. It results in rapid surface drying and, in combination with a secondary drier such as zirconium, barium or lead, uniform through-drying of the paint film. This product is used in all oxidative systems,...展开 Borchers® Deca Cobalt 10 is an important metal drier. It results in rapid surface drying and, in combination with a secondary drier such as zirconium, barium or lead, uniform through-drying of the paint film. This product is used in all oxidative systems, whether air-or forced-drying. It is used in architectural paints, industrial coatings, stains, varnishes, oil-based inks and artists' colors. Cobalt catalyses redox reactions and even small additions result in the dissociation of autoxidant hydroperoxides up to a change in valency from Co2+ to Co3+. Borchers® Deca Cobalt 10 thus results in rapid surface drying. A surplus of cobalt may result in defects such as wrinkling, poor through-drying and yellowing. 收起
Borchers® Deca Cobalt 12 OMG Borchers GmbH 12% COBALT TEN-CEM是一种很重要的金属催干剂。它可快速催干表面,结合辅助催干剂例如锆、钡或铅,均一彻底的催干涂膜表面。它用于溶剂型体系。钴催化氧化还原反应,甚至少量添加即可导致过氧化氢自氧化分解以至于 Co2+ 变成了 Co3+。 它可用于建筑漆、工业涂料、着色剂、清漆、油基油墨和艺术颜料。过剩的钴会导致缺陷例如起皱、涂膜内部催干性差和黄变
Borchers® Deca Cobalt 12 (xylene) OMG Borchers GmbH Borchers® Deca Cobalt 12 (xylene) is used as a fundamental accelerator used in conjunction with organic peroxides to cure unsaturated polyester systems. Radical polymerization will be initiated as a result of repid decomposition of the organic peroxides. ...展开 Borchers® Deca Cobalt 12 (xylene) is used as a fundamental accelerator used in conjunction with organic peroxides to cure unsaturated polyester systems. Radical polymerization will be initiated as a result of repid decomposition of the organic peroxides. Borchers® Deca Cobalt grades are used in unsaturated polyester systems for coatings and casting resins, as well as in synthetic resins for fiber reinforced tools. It can also be used as an accelerator in unsaturated polyester resins, resulting in a shorter gel time. 收起
Borchers® Deca Cobalt 6 HS OMG Borchers GmbH Borchers® Deca Cobalt 6 HS is used as a fundamental accelerator used in conjunction with organic peroxides to cure unsaturated polyester systems. Radical polymerization will be initiated as a result of repid decomposition of the organic peroxides. Borch...展开 Borchers® Deca Cobalt 6 HS is used as a fundamental accelerator used in conjunction with organic peroxides to cure unsaturated polyester systems. Radical polymerization will be initiated as a result of repid decomposition of the organic peroxides. Borchers® Deca Cobalt grades are used in unsaturated polyester systems for coatings and casting resins, as well as in synthetic resins for fiber reinforced tools. It can also be used as an accelerator in unsaturated polyester resins, resulting in a shorter gel time. 收起
Borchers® Deca Manganese 8 OMG Borchers GmbH Borchers® Deca Manganese 8 is a highly effective oxidative drier. Manganese provides both surface and through drying properties. Manganese based driers promote both surface and through-dry in oxidatively cured binder systems and are usually used in combin...展开 Borchers® Deca Manganese 8 is a highly effective oxidative drier. Manganese provides both surface and through drying properties. Manganese based driers promote both surface and through-dry in oxidatively cured binder systems and are usually used in combination with other primary driers like e.g. Borchi® OXY - Coat or Borchers® Deca Cobalt. Manganese is mainly used in pigmented coating systems and primers because its inherent color may cause discoloration in clear or light colored coatings. High atmospheric humidity severely inhibits the drying effect of manganese based driers. This product is recommended for conventional architectural paints, wood coatings, printing inks and other industrial coatings based on resins that dry by oxidation. 收起
Borchers® Deca Manganese 8 HS OMG Borchers GmbH Borchers® Deca Manganese 8 HS is a highly effective oxidative drier. Manganese provides both surface and through drying properties. Manganese based driers promote both surface and through-dry in oxidatively cured binder systems and are usually used in com...展开 Borchers® Deca Manganese 8 HS is a highly effective oxidative drier. Manganese provides both surface and through drying properties. Manganese based driers promote both surface and through-dry in oxidatively cured binder systems and are usually used in combination with other primary driers like e.g. Borchi® OXY - Coat or Borchers® Deca Cobalt. Manganese is mainly used in pigmented coating systems and primers because its inherent color may cause discoloration in clear or light colored coatings. High atmospheric humidity severely inhibits the drying effect of manganese based driers. This product is recommended for conventional architectural paints, wood coatings, printing inks and other industrial coatings based on resins that dry by oxidation. 收起
Borchers® Deca Zirconium 15 OMG Borchers GmbH Borchers® Deca Zirconium 15 is a highly efficient secondary drier. Zirconium driers are the most common secondary driers improving through dry in oxidatively cured coatings primarily by the formation of coordinative bonds. This product is recommended for ...展开 Borchers® Deca Zirconium 15 is a highly efficient secondary drier. Zirconium driers are the most common secondary driers improving through dry in oxidatively cured coatings primarily by the formation of coordinative bonds. This product is recommended for use in solventborne systems. Zirconium is mainly used in combination with primary driers like e.g. Borchi® OXY - Coat, Borchers® Deca Cobalt or Borchers® Deca Manganese based driers. In comparison to other secondary driers, zirconium has better properties in terms of color, yellowing and stability. 收起
Borchers® Deca Zirconium 15 HS OMG Borchers GmbH Borchers® Deca Zirconium 15 HS is a highly efficient secondary drier. Zirconium driers are the most common secondary driers improving through dry in oxidatively cured coatings primarily by the formation of coordinative bonds. This product is recommended f...展开 Borchers® Deca Zirconium 15 HS is a highly efficient secondary drier. Zirconium driers are the most common secondary driers improving through dry in oxidatively cured coatings primarily by the formation of coordinative bonds. This product is recommended for use in VOC-reduced and High-Solid coatings. Zirconium is mainly used in combination with primary driers like e.g. Borchi® OXY - Coat, Borchers® Deca Cobalt or Borchers® Deca Manganese based driers. In comparison to other secondary driers, zirconium has better properties in terms of color, yellowing and stability. 收起
Borchers® Dry 0133 OMG Borchers GmbH 一种与有机催干剂配合使用的协同催干剂成分。适用于所有溶剂型涂料,以及基于醇酸树脂和环氧酯等的低VOC含量和高固含量油漆。用于透明或着色油漆。
Borchers® Dry 0246 OMG Borchers GmbH 一种与有机催干剂配合使用的协同催干剂成分。适用于所有溶剂型涂料,以及基于醇酸树脂和环氧酯等的低VOC含量和高固含量油漆。用于透明或着色油漆。
Borchers® Dry 0347 Aqua OMG Borchers GmbH 用于所有水性涂料体系的新型的联合催干剂,基于结合了有机干燥促进剂的高活性协同催干剂成分。
Borchers® Dry 0410 OMG Borchers GmbH 不含钴的主催干剂,对传统的氧气催干涂料有非常高的催干性。
Borchers® Dry 0411 HS OMG Borchers GmbH 不含钴的主催干剂, 对氧气催干涂料和VOC含量降低的印刷油墨有非常高的催干性。
Borchers® Dry 0614 Aqua OMG Borchers GmbH 不含钴的主催干剂,对水性氧化干燥涂料具有特别高的催干性。
Borchers® Dry 0615 Aqua OMG Borchers GmbH 不含钴的主催干剂,对低VOC的水性氧化干燥涂料具有特别高的催干性。
Borchers® LH 10 OMG Borchers GmbH 用作PU体系等水性、化学交联、双组分涂料的促进剂。
Borchers® VP 0132 OMG Borchers GmbH 一种新型的有机改性钒化合物主催干剂。适用于溶剂型氧气干燥的透明和着色涂料。可以代替目前的主催干剂,特别是钴催干剂。
Borchers® VP 9950 OMG Borchers GmbH 在水性氧化干燥涂料中作为主催干剂的产品。可作为其它主催干剂的替代品,特别是含钴催干剂的替代品。
Borchi® Coll 10 OMG Borchers GmbH 含硅粒子的胶体分散体,不同型号的产品中粒子大小有多种规格。是一种水性、低粘度、无沉淀的分散体。
Borchi® Coll 20 OMG Borchers GmbH 含硅粒子的胶体分散体,不同型号的产品中粒子大小有多种规格。是一种水性、低粘度、无沉淀的分散体。
Borchi® Coll 20 M OMG Borchers GmbH 含硅粒子的胶体分散体,不同型号的产品中粒子大小有多种规格。是一种水性、低粘度、无沉淀的分散体。
Borchi® Coll 30 OMG Borchers GmbH 含硅粒子的胶体分散体,不同型号的产品中粒子大小有多种规格。是一种水性、低粘度、无沉淀的分散体。
Borchi® Gel 0434 OMG Borchers GmbH 用于乳液涂料和水性漆的非离子聚氨酯增稠剂。
Borchi® Gel 0435 OMG Borchers GmbH 它是一种不含APEO和锡的聚氨酯联合增稠剂,用于高剪力条件下的触变控制。
Borchi® Gel 0620 OMG Borchers GmbH 液体聚氨酯基增稠剂,不含烷基酚聚氧乙烯醚和锡化合物。根据使用的基料类型和体系的其它组分,它可通过与基料颗粒和颜料之间形成非共价网络提供显著的剪切变稀流动行为。它非常适合作为增稠剂应用于所有水性漆体系尤其是工业和装饰涂料、胶粘剂和细填料
Borchi® Gel 0621 OMG Borchers GmbH Borchi® Gel 0621是一种液体聚氨酯基增稠剂,不含烷基酚聚氧乙烯醚(APEO),HAPs(有害空气污染物),锡化合物和任何溶剂。该产品主要根据所用基料和其他组分使该体系产生剪切变稀的流体行为。Borchi® Gel 0621适合作为增稠剂用于所有水性油漆体系,尤其是工业和装饰涂料、胶黏剂和深填料
Borchi® Gel 0625 OMG Borchers GmbH 液体聚氨酯基增稠剂,不含烷基酚聚氧乙烯醚,不含锡化合物和任何溶剂。它适合作为增稠剂应用于所有水性漆体系尤其是工业涂料、胶粘剂和细填料以及建筑漆
Borchi® Gel 0626 OMG Borchers GmbH 液体聚氨酯基增稠剂,不含烷基酚聚氧乙烯醚,不含锡化合物和任何溶剂。它适合作为增稠剂应用于所有水性漆体系尤其是工业涂料、胶粘剂和细填料以及建筑漆
Borchi® Gel ALA OMG Borchers GmbH 聚丙烯酸增稠剂,形态为阴离子丙烯酸聚合物水溶液。提高水性涂料的流变性、改善膜结构、尽量减少乳胶漆和清漆在涂布过程中的飞溅。
Borchi® Gel D8 OMG Borchers GmbH 无溶剂型2-己酸乙酯皂铝。适合用作溶剂型和无溶剂型主体树脂的增稠剂。
Borchi® Gel L 75 N OMG Borchers GmbH 聚氨酯基的非离子液体增稠剂。用作乳液漆的流动促进剂、稳定着色水性漆。可与其它增稠剂联合使用以取得特殊的效果。对膜的抗水性不会产生负面影响。
Borchi® Gel L 76 OMG Borchers GmbH 聚氨酯基非离子增稠剂,是一种以水为载体的低黏度乳液制品。用作流动促进剂,提高乳液漆的涂装性能;稳定水性着色漆。
Borchi® Gel LW 44 OMG Borchers GmbH 能够使水相显著增稠。黏度与其剪切率成反比。用于水性、可水乳化漆体系的喷涂和浸涂。也可用于共聚物的分散。