B-100 Polyether Amine | Yangzhou Chenhua New Material CO., LTD. | B-100 Polyether Amine colorless to pale yellow liquid which permits a slight haze. This product has an average molecular weight of about 1000 and a flash point of 193.3 degrees Celsius. B-100 Polyether Amine acts as a dispersant in coatings and inks. | |
CH-4900 Silicon Structural Sealant | Yangzhou Chenhua New Material CO., LTD. | CH-4900 Silicon Structural Sealant is a a silicon structural sealant with has a high temperature resistance. This product has on-component, is neutral, and provides normal temperature curing. CH-4900 Silicon Structural Sealant provides weather, aging, ult...展开 CH-4900 Silicon Structural Sealant is a a silicon structural sealant with has a high temperature resistance. This product has on-component, is neutral, and provides normal temperature curing. CH-4900 Silicon Structural Sealant provides weather, aging, ultraviolet, and ozone resistance to adhesives. 收起 | |
CH-5800 Insulating Glass Sealant | Yangzhou Chenhua New Material CO., LTD. | CH-5800 Insulating Glass Sealant is a two-component, high intensity, high modulus, low permeability curing glass sealant. This product is used best on glass, metals, and marble. CH-5800 Insulating Glass Sealant provides weather, aging, ultraviolet, and oz...展开 CH-5800 Insulating Glass Sealant is a two-component, high intensity, high modulus, low permeability curing glass sealant. This product is used best on glass, metals, and marble. CH-5800 Insulating Glass Sealant provides weather, aging, ultraviolet, and ozone resistance as a sealant. 收起 | |
CH-5900 Silicon Structural Sealant | Yangzhou Chenhua New Material CO., LTD. | CH-5900 Silicon Structural Sealant is a two-component, neutral, normal temperature curing building silicon structural adhesive. This product has a high temperature resistance and is compatible with all neutral silicon adhesives. CH-5900 Silicon Structural...展开 CH-5900 Silicon Structural Sealant is a two-component, neutral, normal temperature curing building silicon structural adhesive. This product has a high temperature resistance and is compatible with all neutral silicon adhesives. CH-5900 Silicon Structural Sealant is used to provide various resistances to adhesives. 收起 | |
CH-910 | Yangzhou Chenhua New Material CO., LTD. | CH-910 is a milky liquid which is an aliphatic water-borne polyurethane resin. This product has an anionic lonic charge and a clear luster. CH-910 is used as a rigid substrate coating. | |
CH-911 | Yangzhou Chenhua New Material CO., LTD. | CH-911 is a transparent or half-transparent liquid which has a viscosity under 100 cps. This product has an aromatic, waterborne, polyurethane resin component and an anion iconicity parameter. CH-911 provides ripping, flexibility, and chemical resistance ...展开 CH-911 is a transparent or half-transparent liquid which has a viscosity under 100 cps. This product has an aromatic, waterborne, polyurethane resin component and an anion iconicity parameter. CH-911 provides ripping, flexibility, and chemical resistance to coatings. 收起 | |
CH-920 | Yangzhou Chenhua New Material CO., LTD. | CH-920 is a milky liquid which is an aromatic water-borne polyurethane resin. This product has an anionic lonic charge and a luster of 96 60oC. CH-920 is used as a rigid substrate coating. | |
CH-940 | Yangzhou Chenhua New Material CO., LTD. | CH-940 is a milky liquid which is a aliphatic water-borne polyurethane resin. This product has an anionic lonic charge and an elongation of 100 percent. Ch-940 is used as a rigid substrate coating. | |
D-230 Polyether Amine | Yangzhou Chenhua New Material CO., LTD. | D-230 Polyether Amine is a diamine on the base of copolymer backbone with an average molecular weight of 220. This product has a specific gravity of 0.9080 g/cm3 and a pH value of 11.6. D-230 Polyether Amine provides light color, low viscosity, low vapor ...展开 D-230 Polyether Amine is a diamine on the base of copolymer backbone with an average molecular weight of 220. This product has a specific gravity of 0.9080 g/cm3 and a pH value of 11.6. D-230 Polyether Amine provides light color, low viscosity, low vapor pressure, and high primary amine content to coatings and adhesives. 收起 | |
D-400 Polyether Amine | Yangzhou Chenhua New Material CO., LTD. | D-400 Polyether Amine is a colorless to pale yellow product with a slight haze which is characterized by repeating units in the backbone. This product has an average molecular weight of 400 and a water weight percentage of less than 0.25. D-400 Polyether ...展开 D-400 Polyether Amine is a colorless to pale yellow product with a slight haze which is characterized by repeating units in the backbone. This product has an average molecular weight of 400 and a water weight percentage of less than 0.25. D-400 Polyether Amine acts as a curing agent which provides flexibility and toughness in adhesives. 收起 | |
DMMP Flame Retardant | Yangzhou Chenhua New Material CO., LTD. | DMMP Flame Retardant is dimethyl methyl phosphonate, a colorless to yellow, transparent liquid. This product has a specific gravity of 1.16 and a molecular weight of 124.08. This product provides flame retardant properties as a coating. | |
ED-2003 Polyether Amine | Yangzhou Chenhua New Material CO., LTD. | ED-2003 Polyether Amine is a water soluble, aliphatic, diamine which appears as a white, waxy solid. This product has a molecular weight of 2000 and a water weight percentage of 0.35. ED-2003 Polyether Amine provides low color and vapor pressure, water so...展开 ED-2003 Polyether Amine is a water soluble, aliphatic, diamine which appears as a white, waxy solid. This product has a molecular weight of 2000 and a water weight percentage of 0.35. ED-2003 Polyether Amine provides low color and vapor pressure, water solubility, and reactivity to water-based coatings. 收起 | |
ED-600 Polyether Amine | Yangzhou Chenhua New Material CO., LTD. | ED-600 Polyether Amine is an aliphatic polyether diamine which appears as a colorless to light yellow liquid with a slight haze. This product has a molecular weight of 600 and pH value between 11 and 12. ED-600 Polyether Amine is used in the preparation o...展开 ED-600 Polyether Amine is an aliphatic polyether diamine which appears as a colorless to light yellow liquid with a slight haze. This product has a molecular weight of 600 and pH value between 11 and 12. ED-600 Polyether Amine is used in the preparation or bio compatible articles and coatings. 收起 | |
ED-900 Polyether Amine | Yangzhou Chenhua New Material CO., LTD. | ED-900 Polyether Amine is a colorless to light yellow aliphatic polyether diamine which is water soluble. This product has a molecular weight of 900 and a melting point which is close to room temperature. ED-900 Polyether Amine provides flexibility, hydr...展开 ED-900 Polyether Amine is a colorless to light yellow aliphatic polyether diamine which is water soluble. This product has a molecular weight of 900 and a melting point which is close to room temperature. ED-900 Polyether Amine provides flexibility, hydrophilicity, reactivity, and biocompatability to coatings. 收起 | |
GH-AS-C2 | SICHUAN GUOHE NEW MATERIALS CO., LTD. | GH-AS-C2, in the form of a clear yellow solution, is acrylic resin for white and color reverse-printing inks that has suitable solvents in alcohol, esters, and alcohol-water. It has good print-ability, high compatibility, with high overprint of compatibil...展开 GH-AS-C2, in the form of a clear yellow solution, is acrylic resin for white and color reverse-printing inks that has suitable solvents in alcohol, esters, and alcohol-water. It has good print-ability, high compatibility, with high overprint of compatibility with the chlorinated polyurethane and polypropylene lamination printing inks. 收起 | |
GH-AS-C2-F | SICHUAN GUOHE NEW MATERIALS CO., LTD. | GH-AS-C2-F, in the form of a clear yellow solution, is acrylic resin for white and color reverse-printing inks that has suitable solvents in alcohol, esters, and alcohol-water. It has good dispersion, good print-ability, and high compatibility, with high ...展开 GH-AS-C2-F, in the form of a clear yellow solution, is acrylic resin for white and color reverse-printing inks that has suitable solvents in alcohol, esters, and alcohol-water. It has good dispersion, good print-ability, and high compatibility, with high overprint of compatibility with the chlorinated polyurethane and polypropylene lamination printing inks. 收起 | |
GH-AS-C2-Q | SICHUAN GUOHE NEW MATERIALS CO., LTD. | GH-AS-C2-Q, in the form of a clear yellow solution, is acrylic resin for white and color reverse-printing inks that has suitable solvents in alcohol, esters, and alcohol-water. It has good solvent release, good print-ability, and high compatibility, with ...展开 GH-AS-C2-Q, in the form of a clear yellow solution, is acrylic resin for white and color reverse-printing inks that has suitable solvents in alcohol, esters, and alcohol-water. It has good solvent release, good print-ability, and high compatibility, with high overprint of compatibility with the chlorinated polyurethane and polypropylene lamination printing inks. 收起 | |
GH-AS-D | SICHUAN GUOHE NEW MATERIALS CO., LTD. | GH-AS-D, in the form of a clear sticky solution, is a polyurethane modified acrylic resin. It is applicable to the production of alcohol and water-soluble gravure printing ink for extrusion lamination with environmental protection. | |
GH-AS-SY-X | SICHUAN GUOHE NEW MATERIALS CO., LTD. | GH-AS-SY-X, in the form of a clear sticky solution, is acrylic resin for white printing ink that has suitable solvents in alcohol, esters, and alcohol-water. It has a higher dilution ratio than the other GH-AS-W products and has good print-ability, high c...展开 GH-AS-SY-X, in the form of a clear sticky solution, is acrylic resin for white printing ink that has suitable solvents in alcohol, esters, and alcohol-water. It has a higher dilution ratio than the other GH-AS-W products and has good print-ability, high compatibility, with high overprint of compatibility with the chlorinated polyurethane and polypropylene lamination printing inks. 收起 | |
GH-AS-W | SICHUAN GUOHE NEW MATERIALS CO., LTD. | GH-AS-W, in the form of a clear sticky solution, is a general type acrylic resin for white printing ink that has suitable solvents in alcohol, esters, and alcohol-water. It has good print-ability and high compatibility, with high overprint of compatibilit...展开 GH-AS-W, in the form of a clear sticky solution, is a general type acrylic resin for white printing ink that has suitable solvents in alcohol, esters, and alcohol-water. It has good print-ability and high compatibility, with high overprint of compatibility with the chlorinated polyurethane and polypropylene lamination printing inks. 收起 | |
GH-AS-W-Q | SICHUAN GUOHE NEW MATERIALS CO., LTD. | GH-AS-W-Q, in the form of a clear sticky solution, is acrylic resin for white printing ink that has suitable solvents in alcohol, esters, and alcohol-water. It has a better solvent release than GH-AS-W and has good print-ability and high compatibility, wi...展开 GH-AS-W-Q, in the form of a clear sticky solution, is acrylic resin for white printing ink that has suitable solvents in alcohol, esters, and alcohol-water. It has a better solvent release than GH-AS-W and has good print-ability and high compatibility, with high overprint of compatibility with the chlorinated polyurethane and polypropylene lamination printing inks. 收起 | |
GH-AS-W2A | SICHUAN GUOHE NEW MATERIALS CO., LTD. | GH-AS-W2A, in the form of a clear sticky solution, is acrylic resin for white printing ink that has suitable solvents in alcohol, esters, and alcohol-water. It has a better solvent release than the other GH-AS-W products and has good print-ability, high c...展开 GH-AS-W2A, in the form of a clear sticky solution, is acrylic resin for white printing ink that has suitable solvents in alcohol, esters, and alcohol-water. It has a better solvent release than the other GH-AS-W products and has good print-ability, high compatibility, with high overprint of compatibility with the chlorinated polyurethane and polypropylene lamination printing inks. 收起 | |
GH-ASJ | SICHUAN GUOHE NEW MATERIALS CO., LTD. | GH-ASJ, in the form of a clear yellow solution, is a general type polyurethane modified acrylic resin for white and color reverse-printing inks that has suitable solvents in alcohol, esters, and alcohol-water. It has good print-ability and high compatibil...展开 GH-ASJ, in the form of a clear yellow solution, is a general type polyurethane modified acrylic resin for white and color reverse-printing inks that has suitable solvents in alcohol, esters, and alcohol-water. It has good print-ability and high compatibility, with high overprint of compatibility with the chlorinated polyurethane and polypropylene lamination printing inks. 收起 | |
GH-ASJ-2 | SICHUAN GUOHE NEW MATERIALS CO., LTD. | GH-ASJ-2, in the form of a clear yellow solution, is a general type polyurethane modified acrylic resin for white and color reverse-printing inks that has suitable solvents in alcohol, esters, and alcohol-water. It has good dispersion, good print-ability,...展开 GH-ASJ-2, in the form of a clear yellow solution, is a general type polyurethane modified acrylic resin for white and color reverse-printing inks that has suitable solvents in alcohol, esters, and alcohol-water. It has good dispersion, good print-ability, and high compatibility, with high overprint of compatibility with the chlorinated polyurethane and polypropylene lamination printing inks. 收起 | |
GH-ASJB-4 | SICHUAN GUOHE NEW MATERIALS CO., LTD. | GH-ASJB-4, in the form of a clear yellow solution, is a modified acrylic resin that is applicable to the production of green environmental protection and high printing suitable alcohol or alcohol-water-soluble gravure surface-printing inks. This product h...展开 GH-ASJB-4, in the form of a clear yellow solution, is a modified acrylic resin that is applicable to the production of green environmental protection and high printing suitable alcohol or alcohol-water-soluble gravure surface-printing inks. This product has low viscosity (700 to 1200 mPas), no dispersing agent needed, and good print-ability. 收起 | |
GH-ASJB-4Y | SICHUAN GUOHE NEW MATERIALS CO., LTD. | GH-ASJB-4Y, in the form of a clear yellow solution, is a modified acrylic resin that is applicable to the production of green environmental protection and high printing suitable alcohol or alcohol-water-soluble gravure surface-printing inks. This product ...展开 GH-ASJB-4Y, in the form of a clear yellow solution, is a modified acrylic resin that is applicable to the production of green environmental protection and high printing suitable alcohol or alcohol-water-soluble gravure surface-printing inks. This product has high viscosity (2000 to 4000 mPas), a dispersing agent is needed, and has good print-ability. 收起 | |
GH-ASJB-4Y-2 | SICHUAN GUOHE NEW MATERIALS CO., LTD. | GH-ASJB-4Y-2, in the form of a clear yellow solution, is a modified acrylic resin that is applicable to the production of green environmental protection and high printing suitable alcohol or alcohol-water-soluble gravure surface-printing inks. This produc...展开 GH-ASJB-4Y-2, in the form of a clear yellow solution, is a modified acrylic resin that is applicable to the production of green environmental protection and high printing suitable alcohol or alcohol-water-soluble gravure surface-printing inks. This product has high viscosity (2000 to 4000 mPas), a dispersing agent is needed, and has good print-ability. 收起 | |
GH-ASJG-A | SICHUAN GUOHE NEW MATERIALS CO., LTD. | GH-ASJG-A, in the form of a clear solution, is a ketone and benzene free environment-friendly two-component glazing oil resin. It has a viscosity of 1500 to 3000 mPas at 25°C and when using esters as the solvent, it is a coating adhesive and resin suitabl...展开 GH-ASJG-A, in the form of a clear solution, is a ketone and benzene free environment-friendly two-component glazing oil resin. It has a viscosity of 1500 to 3000 mPas at 25°C and when using esters as the solvent, it is a coating adhesive and resin suitable for PET, PVC, BOPP, PE, VMPET, aluminum film, paper, etc. 收起 | |
GH-ASJG-B | SICHUAN GUOHE NEW MATERIALS CO., LTD. | GH-ASJG-B, in the form of a clear solution, is a ketone and benzene free environment-friendly two-component glazing oil resin. It has a viscosity of less than 100 mPas at 25°C and when using esters as the solvent, it is a coating adhesive and resin suitab...展开 GH-ASJG-B, in the form of a clear solution, is a ketone and benzene free environment-friendly two-component glazing oil resin. It has a viscosity of less than 100 mPas at 25°C and when using esters as the solvent, it is a coating adhesive and resin suitable for PET, PVC, BOPP, PE, VMPET, aluminum film, paper, etc. 收起 | |
GH-FF | SICHUAN GUOHE NEW MATERIALS CO., LTD. | GH-FF, in the form of a clear solution, is a kind of green environmental protection, anti-corrosion coatings resin. It has good anti-corrosive performance and can be widely applied to anti-corrosion coating, in the metal. | |
GH-OH-1015 | SICHUAN GUOHE NEW MATERIALS CO., LTD. | GH-OH-1015, in the form of a clear colorless to pale yellow sticky solution, is a green environmental protection hydroxyl acrylic resin. It has a viscosity of 1500 to 3000 mPas, is quick drying, good adhesive strength, gloss, and is suitable for intermedi...展开 GH-OH-1015, in the form of a clear colorless to pale yellow sticky solution, is a green environmental protection hydroxyl acrylic resin. It has a viscosity of 1500 to 3000 mPas, is quick drying, good adhesive strength, gloss, and is suitable for intermediate and top coatings of metal and plastics, and primer. 收起 | |
GH-OH-1503 | SICHUAN GUOHE NEW MATERIALS CO., LTD. | GH-OH-1503, in the form of a clear colorless to pale yellow sticky solution, is a green environmental protection hydroxyl acrylic resin. It has a viscosity of 1000 to 2000 mPas, is quick drying, good adhesive strength, gloss, and is suitable for intermedi...展开 GH-OH-1503, in the form of a clear colorless to pale yellow sticky solution, is a green environmental protection hydroxyl acrylic resin. It has a viscosity of 1000 to 2000 mPas, is quick drying, good adhesive strength, gloss, and is suitable for intermediate and top coatings of metal and plastics, and primer. 收起 | |
GH-OH-2607 | SICHUAN GUOHE NEW MATERIALS CO., LTD. | GH-OH-2607, in the form of a clear colorless to pale yellow sticky solution, is a green environmental protection hydroxyl acrylic resin. It has a viscosity of 5500 to 7500 mPas, is quick drying, good adhesive strength, gloss, and is suitable for intermedi...展开 GH-OH-2607, in the form of a clear colorless to pale yellow sticky solution, is a green environmental protection hydroxyl acrylic resin. It has a viscosity of 5500 to 7500 mPas, is quick drying, good adhesive strength, gloss, and is suitable for intermediate and top coatings of metal and plastics, and primer. 收起 | |
GH-OH-3005 | SICHUAN GUOHE NEW MATERIALS CO., LTD. | GH-OH-3005, in the form of a clear colorless to pale yellow sticky solution, is a green environmental protection hydroxyl acrylic resin. It has a viscosity of 1000 to 2000 mPas, is quick drying, good adhesive strength, gloss, and is suitable for intermedi...展开 GH-OH-3005, in the form of a clear colorless to pale yellow sticky solution, is a green environmental protection hydroxyl acrylic resin. It has a viscosity of 1000 to 2000 mPas, is quick drying, good adhesive strength, gloss, and is suitable for intermediate and top coatings of metal and plastics, and primer. 收起 | |
GH-OH-4007 | SICHUAN GUOHE NEW MATERIALS CO., LTD. | GH-OH-4007, in the form of a clear colorless to pale yellow sticky solution, is a green environmental protection hydroxyl acrylic resin. It has a viscosity of 5000 to 7000 mPas, is quick drying, good adhesive strength, gloss, and is suitable for intermedi...展开 GH-OH-4007, in the form of a clear colorless to pale yellow sticky solution, is a green environmental protection hydroxyl acrylic resin. It has a viscosity of 5000 to 7000 mPas, is quick drying, good adhesive strength, gloss, and is suitable for intermediate and top coatings of metal and plastics, and primer. 收起 | |
GH-PU-1 | SICHUAN GUOHE NEW MATERIALS CO., LTD. | GH-PU-1, in the form of a clear sticky solution, is an environment-friendly polyurethane resin that does not contain benzene, toluene, and ketone. It has good print-ability and high compatibility, with high overprint of compatibility with the chlorinated ...展开 GH-PU-1, in the form of a clear sticky solution, is an environment-friendly polyurethane resin that does not contain benzene, toluene, and ketone. It has good print-ability and high compatibility, with high overprint of compatibility with the chlorinated polyurethane and polypropylene lamination printing inks. 收起 | |
GH-PU-2 | SICHUAN GUOHE NEW MATERIALS CO., LTD. | GH-PU-2, in the form of a clear sticky solution, is an environment-friendly polyurethane resin that does not contain benzene, toluene, and ketone. It has good print-ability and high compatibility, with high overprint of compatibility with the chlorinated ...展开 GH-PU-2, in the form of a clear sticky solution, is an environment-friendly polyurethane resin that does not contain benzene, toluene, and ketone. It has good print-ability and high compatibility, with high overprint of compatibility with the chlorinated polyurethane and polypropylene lamination printing inks. 收起 | |
GH-PU-3 | SICHUAN GUOHE NEW MATERIALS CO., LTD. | GH-PU-3, in the form of a clear sticky solution, is an environment-friendly polyurethane resin that does not contain benzene, toluene, and ketone. It has good print-ability and high compatibility, with high overprint of compatibility with the chlorinated ...展开 GH-PU-3, in the form of a clear sticky solution, is an environment-friendly polyurethane resin that does not contain benzene, toluene, and ketone. It has good print-ability and high compatibility, with high overprint of compatibility with the chlorinated polyurethane and polypropylene lamination printing inks. 收起 | |
GH-TCJ-1 | SICHUAN GUOHE NEW MATERIALS CO., LTD. | GH-TCJ-1, in the form of a colorless clear sticky solution, is a hydroxyl acrylic ester copolymerization modified resin with a viscosity of 600 to 1200 mPas. It is ideal to substitute for non-environmental protection coatings pipeline, equipment, and cont...展开 GH-TCJ-1, in the form of a colorless clear sticky solution, is a hydroxyl acrylic ester copolymerization modified resin with a viscosity of 600 to 1200 mPas. It is ideal to substitute for non-environmental protection coatings pipeline, equipment, and containers. 收起 | |
GH-TCJ-2 | SICHUAN GUOHE NEW MATERIALS CO., LTD. | GH-TCJ-2, in the form of a colorless clear sticky solution, is a hydroxyl acrylic ester copolymerization modified resin with a viscosity of 400 to 1000 mPas. It is ideal to substitute for non-environmental protection coatings pipeline, equipment, and cont...展开 GH-TCJ-2, in the form of a colorless clear sticky solution, is a hydroxyl acrylic ester copolymerization modified resin with a viscosity of 400 to 1000 mPas. It is ideal to substitute for non-environmental protection coatings pipeline, equipment, and containers. 收起 | |
GH-WPU | SICHUAN GUOHE NEW MATERIALS CO., LTD. | GH-WPU, in the form of a white emulsion, is a green environmental protection type of waterborne polyurethane resin emulsion. It has a suitable solvent in water and alcohol and is suitable for printing glue and for preparation of clear and white printing g...展开 GH-WPU, in the form of a white emulsion, is a green environmental protection type of waterborne polyurethane resin emulsion. It has a suitable solvent in water and alcohol and is suitable for printing glue and for preparation of clear and white printing glue. 收起 | |
M-2070 Polyether Amine | Yangzhou Chenhua New Material CO., LTD. | M-2070 Polyether Amine is a colorless to light yellow monoamine which is based on copolymer backbone. This product has an average molecular weight of about 2000 and a PO/EO ratio of 10/31. M-2070 Polyether Amine provides surfactant properties and water so...展开 M-2070 Polyether Amine is a colorless to light yellow monoamine which is based on copolymer backbone. This product has an average molecular weight of about 2000 and a PO/EO ratio of 10/31. M-2070 Polyether Amine provides surfactant properties and water solubility to adhesives. 收起 | |
T-3000 Polyether Amine | Yangzhou Chenhua New Material CO., LTD. | T-3000 Polyether Amine is a colorless to pale yellow primary polyether triamine. This product has an approximate molecular weight of 3000 and a water weight percentage of 0.25. T-3000 Polyether Amine works as an adhesion promoter in coatings. | |
T-5000 Polyether Amine | Yangzhou Chenhua New Material CO., LTD. | T-5000 Polyether Amine is a primary polyether triamine which appears as a colorless to pale yellow liquid with a slight haze. This product is has a molecular weight of 5000 and a water weight percentage of less than 25. T-5000 Polyether Amine is used in c...展开 T-5000 Polyether Amine is a primary polyether triamine which appears as a colorless to pale yellow liquid with a slight haze. This product is has a molecular weight of 5000 and a water weight percentage of less than 25. T-5000 Polyether Amine is used in coatings and acts as an adhesive in epoxy systems. 收起 | |
TCEP Flame Retardant | Yangzhou Chenhua New Material CO., LTD. | TCEP Flame Retardant is a colorless to yellowish transparent liquid with a molecular weight of 285.5. This product has a specific gravity between 1.41 and 1.43 and a flash point greater than 200 degrees Celsius. TCEP Flame Retardant imparts flame retardan...展开 TCEP Flame Retardant is a colorless to yellowish transparent liquid with a molecular weight of 285.5. This product has a specific gravity between 1.41 and 1.43 and a flash point greater than 200 degrees Celsius. TCEP Flame Retardant imparts flame retardant properties as a nitrocellulose varnish additive due to its plasticization. 收起 | |
TCPP Flame Retardant | Yangzhou Chenhua New Material CO., LTD. | TCPP Flame Retardant is a colorless to yellowish, oily liquid with a molecular weight of 327.56. This product has an aquatic solubility of 1.6g/l at 20 degrees Celsius and is insoluble in aliphatic hydrocarbons. This product acts as a flame retardant in c...展开 TCPP Flame Retardant is a colorless to yellowish, oily liquid with a molecular weight of 327.56. This product has an aquatic solubility of 1.6g/l at 20 degrees Celsius and is insoluble in aliphatic hydrocarbons. This product acts as a flame retardant in coatings. 收起 |